Miele K9552 Users Manual K9552iD_gb.vp
K9552 to the manual 672dc3d3-fd21-43c1-aa9f-b4755d95bd3e
2015-01-24
: Miele Miele-K9552-Users-Manual-222491 miele-k9552-users-manual-222491 miele pdf
Open the PDF directly: View PDF .
Page Count: 52
Download | |
Open PDF In Browser | View PDF |
Operating and installation instructions Refrigerator with Dynamic cooling K 9552 iD (-1) K 9752 iD (-1) To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. en - GB, HK M.-Nr. 07 470 031 Contents Guide to the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 How to save energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Switching on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Before using for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Safety lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Switching off for longer periods of time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 The correct temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Setting the temperature in the refrigerator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Temperature display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Temperature display brightness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Super cool and Dynamic cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Super cool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Dynamic cooling m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Using the refrigerator efficiently . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Different storage zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Food which should not be stored in a refrigerator. . . . . . . . . . . . . . . . . . . . . . . . . 20 When shopping for food . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Storing food correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Fruit and vegetables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Unpacked meat and vegetables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Protein rich foods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Meat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Adjusting the interior fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Moving the shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Split shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Adjusting the condiment tray/bottle shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Moving the bottle divider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Automatic defrost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Cleaning the interior and accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Ventilation gaps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Door seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Noises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Contents After Sales / Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Climate range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Before installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Does your old appliance have a different hinging mechanism? . . . . . . . . . . . . . . 34 Stainless steel front. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Building-in dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Adjusting the door hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Changing the door hinging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Appliance door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Building in the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Weight of the furniture door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Building into a peninsular run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Fitting a furniture door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Guide to the appliance a Safety lock indicator light b On/Off button c Refrigerator temperature display d Temperature selector buttons (+ for warmer; – for colder) e Super cool button and indicator light f Dynamic cooling button and indicator light 4 Guide to the appliance a Dynamic cooling fan f Butter and cheese compartment b Bottle rack* g Egg tray/Condiment tray c Adjustable shelves h Interior lighting d Condensate channel and drain hole i Universal container* e Fruit and vegetable containers * j Bottle shelf k Bottle divider* * Depending on model 5 Caring for the environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation! Rather than just throwing these materials away, please ensure that they are recycled. Disposal of your old appliance Electrical and electronic appliances often contain materials which, if handled or disposed of incorrectly, could be potentially hazardous to human health and to the environment. They are, however, essential for the correct functioning of your appliance. Please do not therefore dispose of it with your household waste. Please dispose of it at your local community waste collection / recycling centre or contact your dealer for advice. Ensure that it presents no danger to children while being stored for disposal. Take care not to damage the pipework at the back of it before or during transportation to an authorised collection depot. In this way, refrigerant in the pipework and oil in the compressor will be contained, and will not leak out into the environment. 6 Warning and Safety instructions Correct application This appliance complies with all relevant legal safety requirements. Improper use of the appliance can, however, present a risk of both personal injury and material damage. ~ This appliance is not designed for commercial use. It is intended for use in domestic households and in similar working and residential environments such as: – Shops To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before installation and before using it for the first time. They contain important notes on the installation, safety, operation and care of the appliance. Keep these instructions in a safe place and pass them on to any future user. – Offices and showrooms – Hostels and guest houses. It must only be used as a domestic appliance to cool and store foodstuffs. Any other usage is not supported by the manufacturer and could be dangerous. Miele cannot be held liable for damage resulting from incorrect or improper use or operation of the appliance. Safety with children ~ This appliance is not a toy! To avoid the risk of injury, do not allow children to play on or near it or to play with the controls. Older children may only use the appliance if its operation has been clearly explained to them and they are able to use it safely, recognising the dangers of misuse. ~ Keep children away from the appliance at all times and supervise them whilst you are using it. 7 Warning and Safety instructions Technical safety ~ The more coolant there is in an ~ Before setting up the appliance, appliance, the larger the room it should be installed in. In the event of a leakage, if the appliance is in a small room, there is the danger of combustible gases building up. For every 8 g of coolant at least 1 m3 of room space is required. The amount of coolant in the appliance is stated on the data plate inside the appliance. check it for any externally visible damage. Do not install and use a damaged appliance. ~ Before connecting the appliance to ~ This appliance contains the coolant Isobutane (R600a), a natural gas which is environmentally friendly. Although it is flammable, it does not damage the ozone layer and does not increase the greenhouse effect. The use of this coolant has, however, led to a slight increase in the noise level of the appliance. In addition to the noise of the compressor, you might be able to hear the coolant flowing around the system. This is unavoidable, but does not have any adverse effect on the performance of the appliance. Care must be taken during the transportation and setting up of the appliance that no parts of the cooling system are damaged. Leaking coolant can be harmful to the eyes. In the event of any damage: - avoid open fires and anything which creates a spark, - disconnect from the mains, - air the room in which the appliance is located for several minutes and - contact the Service Department for advice. 8 the mains supply, make sure that the rating on the data plate corresponds to the voltage and frequency of the household supply. This data must correspond in order to avoid the risk of damage to the appliance. Consult a qualified electrician if in any doubt. ~ The electrical safety of this appliance can only be guaranteed when continuity is complete between it and an effective earthing system which complies with current local and national safety regulations. It is most important that this basic safety requirement is present and tested regularly, and where there is any doubt, the household wiring system should be inspected by a qualified electrician. The manufacturer cannot be held liable for damage or injury caused by the lack of or inadequacy of an effective earthing system (e.g. electric shock). ~ If the connection cable is faulty it must only be replaced by a Miele approved service technician to protect the user from danger. Warning and Safety instructions ~ Safe operation of the appliance is only assured if it has been installed and connected in accordance with these operating and installation instructions. ~ This equipment may only be used in mobile installations such as ships, caravans, aircraft etc. if a risk assessment of the installation has been carried out by a suitably qualified engineer. ~ Installation work, maintenance and repairs may only be carried out by suitably qualified and competent persons in accordance with national and local safety regulations. Repairs and other work by unqualified persons could be dangerous and the manufacturer will not be held liable. Ensure current is not supplied to the appliance until after maintenance or repair work has been carried out. ~ The appliance is only completely isolated from the electricity supply when: – it has been switched off at the wall socket and the plug has been withdrawn, – the mains fuse is withdrawn, or – the screw-out fuse is removed in countries where this is applicable. ~ Do not connect the appliance to the mains electricity supply by an extension lead. Extension leads do not guarantee the required safety of the machine (e.g. danger of overheating). ~ In countries where there are areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the appliance and its surroundings in a clean condition at all times. Any damage which may be caused by cockroaches or other vermin will not be covered by the guarantee. Correct use ~ Never store explosive materials in the appliance or any products containing propellants (e.g. spray cans). Thermostats switching on may produce sparks which could present a fire hazard. Flammable compounds could explode. ~ Do not operate any electrical equipment (e.g. an electric ice-cream maker) inside the appliance. Danger of sparking and explosion. ~ If storing alcohol with a high percentage proof, make sure it is tightly closed and stored upright. Danger of explosion. ~ Observe the "use by" dates given on food to avoid the risk of food poisoning. Storage times will depend on several factors, including the freshness and quality of the food as well as the temperature at which it is stored. Follow the instructions given on the food manufacturer’s packaging on storage conditions required. 9 Warning and Safety instructions ~ Do not use sharp edged objects to – remove frost and ice, – separate food which has become frozen. They will damage the evaporator, causing irreversible damage to the appliance. ~ Do not use defrosting sprays or de-icers, as they might contain substances which could damage the plastic parts or which could cause a build-up of gases and pose a danger to health. ~ Do not use any oils or grease on the door seal as these will cause the seal to become porous with time. ~ Do not store cooking oil in the refrigerator door. Traces of oil can cause stress cracks to occur in the plastic components in the door. ~ Do not block the ventilation gap in the plinth or the top of the appliance housing unit as this would impair the efficiency of the appliance, increase the electricity consumption and could cause damage to the appliance. ~ The appliance is designed for use within certain climate ranges (ambient temperatures), and should not be used outside this range. The climate range for your appliance is stated on the data plate inside the appliance. Installing it in a room with too low an ambient temperature, e.g. a garage, can lead to the appliance switching off for longer periods so that it cannot maintain the required temperature. 10 ~ Never use a steam-cleaning appliance to clean this appliance. Pressurised steam could reach the electrical components and cause a short circuit. Disposal of your old appliance ~ Before disposing of an old appliance first make the door latch or lock unusable. This way you will prevent children from accidentally locking themselves in and endangering their lives. ~ Be careful not to damage any part of the pipework whilst awaiting disposal, e.g. by – puncturing the refrigerant channels in the evaporator. – bending any pipework. – scratching the surface coating. Splashes of refrigerant can damage the eyes. The manufacturer cannot be held liable for damage caused by non-compliance with these Warning and Safety instructions. How to save energy Normal energy consumption Increased energy consumption In a ventilated room. In an enclosed, unventilated room. Protected from direct sunlight. In direct sunlight. Not situated near to a heat source (radiator, oven). Situated near to a heat source (radiator, oven). Where the ideal ambient room temperature is approx. 20°C. Where there is a high ambient room temperature. Temperature setting with a thermostat which is approximate (set in stages). With a medium setting of 2 to 3. With a high setting: the lower the temperature in the compartment, the higher the energy consumption. Temperature setting with a thermostat which is exact to the degree (digital display). Cellar section 8 to 12°C Installation site On appliances with winter setting, please make sure that the winter PerfectFresh zone just above 0 °C setting is switched off when the ambient temperature is warmer Freezer section -18°C than 16 °C. Refrigerator section 4 to 5 °C Wine storage section 10 to 12 °C Use Only open the doors when necessary and for as short a time as possible. Frequent opening of the doors for long periods will cause a loss of coldness. Store food in an organised way. If food is not stored in an organised way, searching for an item will mean the door is open for longer. Allow hot food and drinks to cool down before placing them in the appliance. Placing hot food in the appliance will cause the compressor to run for a long time, as the appliance will have to work harder to lower the temperature. Store food covered or packaged. The evaporation or condensation of liquids will cause a loss of coldness in the refrigerator. Place frozen food in the refrigerator to defrost. Do not over-fill the appliance to allow air to circulate. Defrosting Defrost the freezer compartment when a layer of ice 0.5 cm thick has built up. A layer of ice hinders the cold from reaching the frozen food, and causes an increase in energy consumption. 11 Switching on and off Before using for the first time Switching on The stainless steel trim to the interior shelves and the door shelves has a layer of protective foil to prevent scratching during transportation. ^ Do not remove this foil until the appliance has been built in. ^ Treat the stainless steel surfaces with a proprietary stainless steel conditioner immediately after removing the foil (available from the Miele Spare Parts Department or via the internet on www.miele.co.uk). Important! A stainless steel conditioner gives long lasting protection, and helps to prevent resoiling. ^ Clean the inside of the appliance and the accessories with warm water and a little washing-up liquid, and then dry with a soft cloth. Important: To ensure the correct functioning of the appliance, let it stand for between 1½ and 2 hours after transporting it to its final location before connecting it to the mains. 12 ^ Press the On/Off button. The temperature display lights up, the appliance starts cooling and the interior light will come on when the door is opened. To enable the temperature to get sufficiently cold inside the appliance, allow the appliance to run for a few hours before placing food in it. Switching off ^ Press the On/Off button until the temperature display goes out. The cooling system is switched off. (If this does not happen, the safety lock is still activated). Safety lock The safety lock can be activated to prevent the appliance being switched off inadvertently. Switching on and off Activating or de-activating the safety lock Switching off for longer periods of time If the appliance is not going to be used for a longer period of time, e.g. whilst on holiday: ^ Press and hold the Super cool button pressed in for approx. 5 seconds. The Super cool indicator light flashes, and a ; flashes in the temperature display. ^ Press the Super cool button again. ; will light up in the display. ^ You can now choose between ; 0 and ; 1 by pressing the temperature selector buttons: 0: the safety lock is de-activated, 1: the safety lock is activated. ^ switch the appliance off, ^ switch off at the wall socket and withdraw the plug, ^ clean the appliance out and ^ leave the door ajar to air the appliance. If, during a long absence, the appliance is switched off but not cleaned out and the door is left shut, there is a danger of mould and odours building up inside the appliance. ^ Press the Super cool button to save the setting. The safety lock indicator light X will light up when the safety lock has been activated. ^ Press the On/Off button to come out of the setting mode. If you do not do this, the electronics will switch over to normal operation automatically after a couple of minutes. 13 The correct temperature It is very important to set the correct temperature for storing food in the appliance. Micro-organisms will cause food which is not stored at the correct temperature to deteriorate rapidly. Temperature influences the growth rate of these micro-organisms. Reducing the temperature reduces their growth rate. Setting the temperature in the refrigerator Use the two buttons underneath the temperature display to set the temperature for the refrigerator. Press the The temperature in the appliance will rise: – the more often the door is opened and the longer it is kept open, – if too much food is stored in it at once, – the warmer the food is which is being put into it, – the higher the ambient temperature surrounding the appliance. The appliance is designed for use in specific ambient temperatures (climate ranges). Do not use in ambient temperatures for which it is not designed. We recommend a temperature of 4 °C in the refrigerator. + button : – button: to raise the temperature (it gets warmer) to reduce the temperature (it gets cooler). The temperature being set will flash in the display. When pressing the buttons, the following information shows in the display: – When first pressed, the last temperature selected flashes. – Each subsequent press of the button adjusts the temperature shown in 1 °C steps. – Keeping the button pressed in adjusts the temperature continually. Approx. 5 seconds after letting go of the button, the current average temperature of the refrigerator is automatically shown. 14 The correct temperature If you have adjusted the temperature, wait for approx. 6 hours if the appliance is not very full and for approx. 24 hours if the appliance is full, before checking the temperature display, as it will take this long for the display to give an accurate reading. If, after this time, the temperature is still too high or too low, you will need to adjust it again. Temperature display brightness The appliance is supplied with the brightness of the temperature display set as low as possible. However, if the door is opened, a setting changed or if the alarm is sounding, the temperature display will appear much brighter for approx. 1 minute. The level of brightness can be adjusted: Temperature range The temperature can be adjusted from: 2 °C to 9 °C. The ambient temperature in the room and the installation location can affect the time it takes for the appliance to reach the lowest temperature. If the ambient temperature is too high, the appliance may not reach the lowest temperature. ^ Press and hold the Super cool button pressed in for approx. 5 seconds. The Super cool indicator light flashes, and a ; flashes in the temperature display. Temperature display During normal operation, the temperature display on the control panel shows the average temperature in the refrigerator. If the temperature is not within the range that the appliance is able to display, bars will flash in the temperature display. ^ Press one of the temperature selector buttons repeatedly until ^ appears in the display. ^ Press the Super cool button again. ^ lights up in the display. ^ You can now adjust the level of brightness by pressing the temperature selector buttons. You can choose from settings 1 to 5: 1: dimmest setting, 5: brightest setting. 15 The correct temperature ^ Press the Super cool button to save the setting. ^ Press the On/Off button to come out of setting mode. If you do not do this, the electronics will switch over to normal operation automatically after a couple of minutes. 16 Super cool and Dynamic cooling Super cool Dynamic cooling m The Super cool function can be used to rapidly reduce the temperature in the refrigerator section to its lowest setting (depending on the room temperature). When the Dynamic cooling function is not switched on, the natural circulation of air in the appliance will cause different temperature zones in the refrigerator as the cold, heavy air will sink to the lowest section of the appliance. You should bear this in mind when placing food in the appliance (see "Using the refrigerator efficiently"). However, if you are placing a large amount of food in the refrigerator at any one time, it is a good idea to switch on Dynamic cooling. This way you can distribute the temperature inside the appliance to all areas more evenly so that all the food will be chilled to about the same degree. The temperature is set as normal with the temperature control. Switching on Super cool Super cool is particularly recommended for faster chilling of large amounts of fresh food or drink. ^ Press the Super cool button. The Super cool indicator light will come on. The appliance will then work at full power to lower the temperature. Switching off Super cool The Super cool function will switch itself off automatically after approx. 6 hours. The indicator light will go out and the appliance will run at normal power again. Dynamic cooling should also be selected when: – the ambient temperature in the room is high (above approx. 30 °C), and – the room humidity level is high. Switching on Dynamic cooling To save energy, the Super cool function can be switched off once food and drinks are sufficiently chilled. ^ Press the Super cool button. The Super cool indicator light will go out, and the appliance will continue to operate at normal power. ^ Press the Dynamic cooling button m. The Dynamic cooling indicator light will come on. 17 Super cool and Dynamic cooling Switching off Dynamic cooling ^ Press the Dynamic cooling button m. The Dynamic cooling indicator light will go out. The fan automatically switches off when the door is open. 18 Using the refrigerator efficiently Different storage zones Due to the natural circulation of the air in the appliance, there are different temperature zones in the refrigerator. Cold, heavy air sinks to the lowest section of the appliance. Make use of the different zones when placing food in the appliance. This appliance has Dynamic cooling, which helps to keep an even temperature when the fan is running. When Dynamic cooling is switched on, the difference between the various zones is less pronounced. Warmest area The warmest area is in the top section of the door. Use this for storing butter and cheese. Coldest area The coldest area in a refrigerator is directly above the vegetable containers. Use this for all delicate and highly perishable food, e.g. – fish, meat, poultry, – pre-packed vegetables and other fresh food with a label stating it should be kept at a temperature of approx. 4 °C. Do not store explosive materials in the appliance or any products containing propellants (e.g. spray cans). Danger of explosion. If storing alcohol with a high percentage proof, make sure it is tightly closed, and store upright. Do not store cooking oil in the refrigerator door. Traces of oil can cause stress cracks to occur in the plastic components in the door. Food must not touch the back wall of the refrigerator, as it may freeze to the back wall. To allow air to circulate efficiently, do not pack food too closely together in the refrigerator. Do not cover the fan in the rear wall of the refrigerator, as this is essential for keeping the appliance cool. – sausage products, ready meals, – dishes or baked goods containing eggs or cream, – fresh dough, cake mixtures, pizza or quiche dough, – soft cheese and other dairy products, 19 Using the refrigerator efficiently Food which should not be stored in a refrigerator Not all food is suitable for refrigeration, as some food is sensitive to cold. Cucumbers, for example, become glassy, aubergines bitter and potatoes sweet. Tomatoes and oranges lose their aroma, and the peel on citrus fruit hardens. Food which should not be stored in a refrigerator includes: – pineapple, pomegranate, bananas, avocado, mangos, papaya, passion fruit, citrus fruit – fruit which is not yet ripe – aubergines/egg plant, cucumbers, potatoes, peppers/capsicum, tomatoes, courgettes, – some hard cheeses, e.g. Parmesan When shopping for food The freshness of food when first placed in the appliance is an important factor in determining how long it stays fresh, and how long it can be kept in the refrigerator. Time out of the refrigerator, e.g. during transportation, should be kept to a minimum. For example, do not allow food to stay in a hot car for too long. Once food has started to deteriorate, this process cannot be reversed. As little as two hours outside the refrigerator can cause food to start deteriorating. 20 Storing food correctly Food should generally be stored covered or packaged. This will prevent food smells from affecting other foods, food from drying out, and also any cross-contamination of bacteria. The growth of bacteria, such as salmonella, can be avoided by setting the correct temperature and maintaining good standards of hygiene. Fruit and vegetables Fruit and vegetables may be stored loose in the vegetable containers. Please be aware that not all types of fruit and vegetables are suitable for storing in the same container. Aromas and flavours can transfer from one type of food to another (e.g. carrots absorb the smell and flavour of onions very easily). Some food also gives off a natural gas (ethylene) which speeds up the rate at which other food perishes. – Examples of fruit and vegetables which produce a large amount of this natural gas are: Apples, apricots, pears, nectarines, peaches, plums, avocado, figs, blueberries, melons and beans. Using the refrigerator efficiently – Examples of fruit and vegetables which react strongly to the natural gases given off by other types of fruit and vegetables are: Kiwis, broccoli, cauliflower, brussels sprouts, mangos, honeydew melons, apples, apricots, cucumbers, tomatoes, pears, nectarines and peaches. Example: Broccoli should not be stored with apples, as apples produce a large amount of natural gas to which broccoli is very sensitive. The result is a shorter than expected storage time for the broccoli. Meat Meat should be stored unwrapped. (Undo wrappings slightly to leave meat loosely covered, and leave containers open). This permits air to circulate around the meat, allowing the surface to dry slightly, which helps prevent the growth of bacteria. To prevent the risk of bacterial cross-contamination and meat deteriorating, do not let one type of meat come into direct contact with another type. Unpacked meat and vegetables Unpackaged meat and vegetables should be stored separately. To avoid any microbiological crosscontamination, these foods may only be stored together if they are wrapped. Protein rich foods Please note that foods rich in protein deteriorate faster than others. Shellfish, for example, deteriorates faster than fish, and fish deteriorates faster than meat. 21 Adjusting the interior fittings Moving the shelves To move the split shelf: The shelves can be adjusted according to the height of the food. ^ Take both halves of the split glass shelf out, ^ Raise the shelf, pull it forwards slightly until the notch at the side is in line with the shelf support. It can then be raised or lowered to the required level. The raised edge at the back must face upwards to prevent food from touching the back of the appliance and freezing to it. Stoppers prevent the shelves from being dislodged by mistake. Split shelf In order to accommodate tall items in the appliance, one of the shelves is divided. The front section can be pushed under the rear section. ^ Push the rear half of the glass shelf up slightly from below. ^ At the same time, pull the front half of the glass shelf forwards slightly and then push it carefully under the rear half. 22 ^ fit the two brackets onto the supports on either side at the required height, ^ and push the glass shelves in one after the other. The shelf with the raised edge must be at the back. Fruit and vegetable containers on roller insert (depending on model) The fruit and vegetable containers are pushed in and out on rollers, and can be completely removed if necessary. The roller inserts can also be removed for cleaning. Adjusting the interior fittings Fruit and vegetable containers on telescopic runners Adjusting the condiment tray/bottle shelf (depending on model) ^ Lift the tray/shelf up and out of the stainless steel frame to remove. The fruit and vegetable containers are pushed in and out on telescopic runners, and can be completely removed if necessary. ^ Pull the container right out and then lift it up and off. Push the runners back in again to avoid injury or damage. To replace a container, ^ Push up the stainless steel frame, and remove. ^ Replace the frame at the required height. Ensure that it is securely pushed back into position. ^ Replace the tray/shelf in the frame. The tray/shelf can be removed completely and used as a serving tray at the table. ^ place it back on the fully extended runners a. The front of the runners must be right up against the front of the container b. ^ Then push the container back in c. 23 Adjusting the interior fittings Universal container Moving the bottle divider (depending on model) (depending on model) The universal container can be used both to store and serve food. The bottle divider can be moved to the left or right to ensure that bottles are held securely in position when the door is opened and shut. The bottle divider can be removed completely (e.g. for cleaning). ^ To do this, push up the front edge of the bottle divider, and disengage it. It consists of a deep tray a and a shallow tray b. Both trays fit the stainless steel frame. If you wish to use the universal container to serve food, ^ place the shallow tray b in the stainless steel frame, and use the deep tray as a lid a. You can lift the universal container, including contents, out of the frame and take it to the table. 24 Automatic defrost The refrigerator defrosts automatically. Condensate and frost can build up on the back wall of the refrigerator whilst it is in use. You do not need to remove this, as it will defrost and evaporate automatically with the warmth generated by the appliance. The condensate is drained away via a channel and drain hole into an evaporation system at the back of the appliance. Ensure that the condensate channel and drain hole are kept clean and are never blocked so that condensate can flow away without hindrance. 25 Cleaning and care E-Cloth Never use cleaning agents containing abrasive substances such as sand, soda, acids, chlorides or chemical solvents. "Non-abrasive" cleaning agents are also unsuitable as they can cause matt areas to appear. ^ A microfibre “E-Cloth” is available from the Miele Spare Parts Department, which is suitable for cleaning surfaces such as stainless steel, glass, plastic and chrome without the use of chemicals. It can be washed 300 times. To help prevent re-soiling, treat stainless steel surfaces with a proprietary conditioning agent for stainless steel (available from the Miele Spare Parts Department or via the internet on www.miele.co.uk). ^ Switch the appliance off, switch off at the socket and remove the plug. Do not let water get into the electronic unit or the light. ^ Take out any removable parts, e.g. shelves, for cleaning. Do not let water get into the drainage channel and drain hole when cleaning. Do not use steam cleaning apparatus to clean the appliance. Steam could reach the electrical components and cause a short circuit. The data plate located inside the appliance must not be removed. It contains information which is required in the event of a service call. Before cleaning ^ Take any food out of the appliance and store it in a cool place. ^ The serving trays and containers in the door can be removed from their stainless steel frames for cleaning. Cleaning the interior and accessories Use warm water with a little washing up liquid. Accessories and shelves should all be hand-washed only. The butter dish is, however, dishwasher safe. ^ Clean the appliance at least once a month. ^ Clean the condensate channel and drain hole frequently, so that condensate can drain away unhindered. Use a straw or similar to clear the drain if necessary. ^ After cleaning, wipe the interior and accessories with a damp cloth and dry with a soft cloth. Leave the door open to air the appliance for a short while. 26 Cleaning and care After cleaning ^ Clean stainless steel surfaces with a suitable non-abrasive stainless steel cleaning agent following the manufacturer’s instructions on the packaging. ^ Replace all shelves and accessories in the appliance. ^ To help prevent re-soiling, a conditioning agent for stainless steel should always be used after cleaning. Follow the manufacturer’s instructions on the label. ^ Switch on the Super cool function for a while so that the appliance can cool down quickly. Ventilation gaps ^ Insert the plug in the socket, and switch the appliance back on. ^ Place food back in the appliance and close the door. ^ The ventilation gaps should be cleaned on a regular basis with a brush or vacuum cleaner. A build-up of dust will increase the energy consumption of the appliance. Door seal Do not use any oils or grease on the door seal as these will cause the seal to deteriorate and become porous over time. The door seal should be cleaned regularly with clean water and then wiped dry with a soft cloth. 27 Problem solving guide Repairs to electrical appliances should only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Ensure that current is not supplied to the appliance until after maintenance or repair work has been carried out. What to do if . . . . . . the appliance does not get cool. ^ Check whether the appliance has been switched on. The temperature display must be lit up. ^ Check that the plug is correctly inserted in the socket and switched on. ^ Check that the fuse is not defective and that the mains fuse has not tripped. If it has, contact the Miele Service Department. . . . the temperature in the refrigerator is too low. ^ Select a warmer temperature. ^ The Super cool function is still switched on. Super cool only switches itself off after 6 hours. 28 . . . the appliance is switching in too frequently and for too long. ^ Check whether ventilation gaps in the plinth and in the housing unit at the top have been covered over or become too dusty. ^ The door has been opened too frequently, or a large amount of food has just been put in at once. ^ Check that the door has been closed properly. . . . bars flash in the temperature display. Check the temperature display about 6 hours after switching on the appliance. The display will not show a temperature until the temperature in the appliance has reached a certain level. . . . the following messages show in the temperature display "F0" to "F5". There is a fault. Call the Service Department. . . . you cannot switch the appliance off. The safety lock has been activated. Problem solving guide . . . the interior lighting is not working. Has the refrigerator door been left open for too long? The lighting switches itself off automatically after approx. 15 minutes. If it also does not come on when the door is opened briefly, but the temperature display is working, then the light is defective. ^ Call the Service Department. The LED lighting may only be repaired or changed by a service technician. Danger of injury and damage. Should the cover be damaged or need to be removed due to damage, exercise caution. Never look at the lighting with optical instruments (magnifying glass or similar). . . . the floor of the refrigerator is wet. The drain hole is blocked. ^ Clean the condensate channel and drain hole. If you still cannot remedy the fault having followed these suggestions, please contact the Miele Service Department. To prevent unnecessary loss of temperature it is advisable not to open the door while waiting for the appliance to be serviced. 29 Noises Normal noises What causes them Brrrrr... Humming noise made by the motor (compressor). This noise can get louder for brief periods when the motor is switching on. Blubb, blubb.... A gurgling noise can be heard when coolant is circulating through the pipes. Click.... Clicking sounds are made when the thermostat switches the motor on and off. Sssrrrrr.... On multi-zone and frost-free appliances you can sometimes just hear the movement of air circulating inside the appliance. Remember that the noise of the compressor and the coolant circulating in the system is unavoidable. Noises that you can easily rectify What causes them, and what can you do about them? Rattling, vibrating The appliance is uneven: Realign the appliance using a spirit level, by raising or lowering the screw feet underneath the appliance. The appliance is touching another appliance or piece of furniture: Move it away. Drawers, baskets or shelves are unstable or sticking: Check all removable items and refit them correctly. Are any bottles or containers unstable or knocking against each other? Separate them. The transport cable clips are hanging loose at the back of the appliance: Remove the clips. 30 After Sales / Guarantee In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – your Miele Dealer or – Miele (see back cover for contact details). When contacting your Dealer or Miele, please quote the model and serial number of your appliance. This information is given on the data plate inside your appliance. Please note that telephone calls may be monitored and recorded for training purposes. N.B. A call-out charge will be applied for service visits where the problem could have been resolved as described in these instructions. Guarantee For information on the appliance guarantee specific to your country please contact Miele. See back cover for contact details. In the U.K. your appliance is guaranteed for 2 years from the date of delivery. However, you must activate your cover by calling 0845 365 6640 or registering online at www.miele.co.uk. 31 Electrical connection Electrical connection U.K. Non-rewireable plugs (BS 1363) All electrical work should be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK). The fuse cover must be re-fitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is embossed in words in the base of the plug (as applicable to the design of the plug fitted). The appliance is supplied with a mains cable and moulded plug ready for connection to an a.c. single phase 220-240 V 50 Hz supply. Please ensure that the connection data quoted on the data plate match the household mains supply. Connection should be made via a suitable switched socket which is easily accessible. For extra safety it is advisable to protect the appliance with a suitable residual current device (RCD). Do not connect the appliance to the mains electricity supply by an extension lead. Extension leads do not guarantee the required safety of the appliance (e.g. danger of overheating). This appliance must not be connected to the inverter of an autonomous power supply, e.g. a solar power system. When switching the appliance on, a surge in power could trigger the safety cut-out mechanism. This could damage the electronic unit. The appliance must not be used with so-called energy saving devices. These reduce the energy supply to the appliance which could then become too warm. Using such devices could alter the specification of the product. 32 Replacement fuses should be ASTA approved to BS 1362 and have the correct rating. Replacement fuses and fuse covers may be purchased from your local electrical supplier. WARNING THIS APPLIANCE MUST BE EARTHED Installation Climate range This appliance must be built in, otherwise it could tip up. Location This appliance should be installed in a dry, well-ventilated room. It should not be installed where it is exposed to direct sunlight or directly adjacent to a heat-producing appliance such as an oven or a radiator. The room temperature should not go above or below the climate range for which the appliance is designed. The higher the ambient temperature of the room, the more energy the appliance requires to operate. Important: tropical / humid environments During periods of high humidity, some condensation may appear on outside surfaces of cooling appliances. This condensation will disappear when humidity levels drop. For prevention, it is advisable to install the appliance with sufficient ventilation in a dry and/or an air-conditioned room. Please ensure that doors are closing and sealing properly. Please ensure that the appliance is installed in accordance with these installation instructions and that the handle is fitted correctly. Should you require further assistance please contact your Miele customer service centre. This appliance is designed for use within certain climate ranges (ambient temperatures), and should not be used outside this range. The climate range of the appliance is stated on the data plate inside the appliance. Climate range Ambient room temperature SN N ST T +10°C to +32°C +16°C to +32°C +16°C to +38°C +16°C to +43°C Operating in a room which is too cold will cause the cooling system to switch off for too long, causing the internal temperature in the appliance to rise with the risk of food deteriorating and going off. Ventilation Air at the back of the appliance gets warm. The appliance housing unit must be constructed to allow sufficient space for ventilation. A ventilation gap of at least 38 mm depth must be allowed for behind the appliance for air to circulate. The air inlet to the appliance is via the plinth in the housing unit. The cross-section of the air inlet and outlet must be at least 200 cm2 to ensure that air can circulate without hindrance. Otherwise the appliance has to work harder, resulting in an increase in electricity consumption. The air vents must not be covered or blocked in any way. They should be dusted on a regular basis. 33 Installation Before installation ^ Before installation remove the cover strip, sealing strip and other accessories from inside the appliance and from the external rear wall of the appliance. ^ Do not remove the following from the back of the appliance: – The spacers. These ensure the gap required between the back of the appliance and the wall is maintained. – Depending on model, the bags located between the back of the appliance and the metal grille (heat exchanger). They are important for the correct functioning of the appliance. The contents are harmless and do not contain toxic gases. ^ Remove any cable clips from the back of the appliance. 34 ^ Remove the red transport fixing a, and use the stopper supplied b to plug the empty hole. ^ Check that all parts at the back of the appliance are unhindered. Carefully remove any hindrance. Does your old appliance have a different hinging mechanism? If your old appliance had a different type of hinging, the furniture door can still be used. Remove the old hinges from the housing unit. They are no longer required because the furniture door is now fitted to the appliance door. All the necessary parts are supplied or can be ordered from the Miele Spare Parts Department. Installation Stainless steel front (depending on model) If the old appliance had a different type of hinging, or if you cannot or do not wish to reuse the old furniture door a stainless steel front can be fitted instead. This is available from your dealer or the Miele Spare Parts Department. 35 Building-in dimensions Niche height (mm) A K 9552 iD (-1) 1397 - 1413 K 9752 iD (-1) 1772 - 1788 36 Adjusting the door hinges The door hinges are set ex-works to enable the door to be opened wide. However, if the opening angle of the door needs to be limited for any reason, the hinge can be adjusted to accommodate this. – If you would like the appliance door to be cushioned so that it opens more softly, the spring tension on the appliance door can be adjusted. To do this, use the allen key supplied to adjust the door hinges. – For example, if the appliance door hits an adjacent wall when opened, the opening angle can be limited to 90°. ^ Place the locking pins supplied for limiting the door opening into the hinges from above. The door opening angle is now limited to 90°. a To reduce the opening angle: ^ Turn the allen key clockwise. This tightens the hinges and makes it harder to open the door wide. b To open the door fully: ^ Turn the allen key anticlockwise. 37 Changing the door hinging Before building the appliance in, you will need to decide on which side the door is to be hinged. If left hand door hinging is required, follow the instructions below. To change the door hinging you will need the following tools: – a cross-slotted screwdriver, ^ Slide the door outwards and lift it off e. ^ Unscrew the fixing screws d completely, and loosely screw them in at the top and bottom on the opposite side of the appliance f. If you have put locking pins into the hinges to stop the door opening too far: – a screwdriver, – a selection of Torx screwdrivers, – a spanner. Appliance door ^ Remove the locking pins from the top of the hinges. To remove the soft-close mechanism ^ Place the door with the outer side downwards on a stable surface. ^ Open the appliance door. ^ Remove covers a, b and c with a screwdriver. ^ Loosen fixing screws d at the top and the bottom slightly. 38 ^ Using a screwdriver, carefully push tension spring a outwards. Warning. The soft-close mechanism snaps shut when dismantled. Danger of injury. Changing the door hinging ^ Unscrew mounting b and pull soft-close mechanism c downwards to remove it. ^ Undo ball joint d using a spanner and remove it. ^ Replace the hinges in their diagonally opposite corners b. ^ Use a powered screwdriver to secure the hinges; screws a are self-tapping. To secure the soft-close mechanism ^ Place the door with the outer side downwards on a stable surface. ^ Stand the appliance door up, and loosen the hinges at the front (the hinges remain open). ^ Screw ball joint d of soft-close mechanism c into the new fixing holes. ^ Remove screws a, and use the stoppers supplied c to plug the empty holes. ^ Push tension spring a inwards again. Do not close up the hinges. Danger of inury. ^ Screw mounting b onto the hinge and tighten securely. ^ Open out soft-close mechanism c and hook it onto ball joint d. 39 Changing the door hinging ^ Push the appliance door onto the pre-fitted screws, and then tighten the screws. ^ Replace covers a, b and c. ^ Replace the locking pins into the top of the hinges to prevent the doors opening too far. 40 Building in the appliance Building into a peninsular run All fitting instructions given are for a right hand hinged appliance. If you have converted the appliance to left hand hinging you will need to adapt these instructions accordingly. When built into a peninsular run, the rear of the building-in niche must be fitted with a kitchen furniture panel. Aligning the housing unit To install the appliance you will need the following: – a cross-slotted screwdriver, – a selection of Torx screwdrivers, – a hexagon spanner. Weight of the furniture door Before fitting a furniture door, ensure that the weight of the door does not exceed the maximum permitted: Appliance Maximum weight of furniture door in kg K 9552 iD (-1) 15 K 9752 iD (-1) 18 The housing unit must be carefully aligned using a spirit level before installing the appliance. The unit corners must be at right angles, as otherwise the furniture door will not align correctly with the 4 corners of the appliance. Fitting a door which is heavier than the maximum permitted could damage the hinges. 41 Building in the appliance Preparing the appliance ^ Open the appliance door. ^ Slide cover strip a into the holder in the middle of the appliance as illustrated with the bumps facing downwards. The bumps will fit into the keyhole slots. ^ Position the mains electricity cable so that the appliance can be connected easily once installed. ^ Using a screwdriver, remove cover c from the top corner of the appliance. ^ Push the appliance two-thirds of the way into its niche. When doing this, make sure that the mains cable does not get trapped. ^ Fit cover d onto fixing bracket e. ^ With 16 mm thick furniture walls: clip spacers b over the hinges. 42 ^ Secure fixing bracket e to the top of the appliance with screws f (M5 x 15). Building in the appliance Building in the appliance ^ Fit cover g onto fixing bracket h. ^ Secure fixing bracket h to the bottom of the appliance with screws i (M5 x 15). ^ Carefully remove the protective foil from sealing strip j. ^ Apply the sealing strip to the side of the appliance on which the door is opened so that it is flush with the front edge of the appliance. Fit the sealing strip so that it meets up with the lower edge of top cover d and then cut the sealing strip 2 - 3 mm above bottom fixing bracket h. ^ Push the appliance into the niche until covers d and g touch the front edge of the side walls of the housing unit. – With 16 mm thick walls: The spacers should touch the front edge at the top and bottom of the side walls of the housing unit, detail a. – With 19 mm thick walls: The front edges of the top and bottom hinges sit flush with the front edge of the housing unit side walls, detail b. ^ Make sure that the covers on the top and bottom fixing brackets sit flush with the front edges of the housing unit side walls, detail d. This will create a gap all round of 42 mm to the front edges of the housing unit side walls. 43 Building in the appliance On furniture with door fittings (e.g. stubs, seals etc) the dimension of these must be taken into account when making sure there is a gap all round of 42 mm. Securing the appliance in the niche ^ Pull the appliance forwards by the dimension of the door fitting to keep the gap at 42 mm all round. The hinges and the covers will now protrude by the dimension of the door fitting. Tip: Removing the door fittings. This will ensure that the door is flush with the surrounding kitchen unit furniture doors. If the all round gap of 42 mm is not maintained between the appliance casing and the front edge of the housing unit side wall the door may not shut properly. This could lead to a build-up of ice and condensation and also cause operational faults. ^ Align the appliance height on both sides by altering the adjustable feet using the spanner supplied c. 44 ^ Press the appliance against the housing unit wall on the hinge side. ^ To fix the appliance to the housing unit at the top and bottom, screw the long 4 x 20 mm chip board screws a into the hinges at the top and bottom. Building in the appliance ^ Break off the protruding end of bottom cover e. It is no longer required. ^ Fit angled cover g onto bottom fixing bracket c. ^ Close the appliance door. Fitting a furniture door ^ Loosen screws b on the top and bottom fixing brackets c. ^ Press fixing bracket c against the side wall and tighten screws b. ^ Attach fixing bracket c to the housing unit side wall with screws d. Drill holes in the housing unit side walls if necessary. ^ Break off the protruding end of top cover e, turn the cover around and fit it on top fixing bracket c. ^ Fit oblong cover f onto top fixing bracket c. ^ A gap of 8 mm a must be set between the appliance door and the central fixing bracket. ^ Push fitting aids b up to the height of the furniture door: the lower edge X of the fitting aids must be at the same height as the upper edge of the furniture door being fitted (see - on the diagram). ^ Undo nuts c and take fixing bracket d off together with the fitting aids. 45 Building in the appliance ^ Using a pencil, lightly mark a line down the centre of the inside of the furniture door. ^ Hang fixing bracket d with the fitting aids onto the inside of the furniture door. Align the fixing bracket centrally. ^ Attach the fixing bracket securely using at least 6 short chipboard screws e (4 x 14 mm). (On cassette doors only use 4 screws on the edges). ^ Pull the fitting aids upwards to remove them f. ^ Turn them around and fit them into the middle slots on fixing bracket g for safe keeping. 46 ^ Hang the furniture door onto adjusting bolts h. ^ Loosely attach nuts c on the adjusting bolts. ^ Close the door and check the distance between the door and neighbouring furniture doors. ^ Align to match neigbouring doors if necessary: Side adjustments X are made by sliding the furniture door, and height adjustments Y by turning adjusting bolts h with a screwdriver. ^ Tighten nuts c. Building in the appliance Securing the appliance door to the furniture door: ^ Screw fixing bracket a into the pre-drilled holes in the appliance door using hexagonal screw b. Make sure the two metal edges c are aligned (Symbol II). ^ Close the door and align it with neighbouring furniture doors. ^ Whilst counterholding the adjusting bolts i with a screwdriver, tighten nuts h on the appliance door. ^ Drill fixing holes d in the furniture door, and screw in 4 x 14 mm screws e. ^ Cover strip j must be completely hidden in the niche, and must not protrude. (On large or divided doors, attach a second pair of fixing brackets a in the handle region of the door. Use the pre-drilled holes in the appliance door.) ^ Tighten all screws again. – Align depth Z on the furniture door: Loosen screws f at the top of the appliance door, and loosen the hexagon-headed screw g at the bottom of the fixing bracket. By moving the furniture doors, create a gap of 2 mm between the furniture doors and the front edge of the niche. 47 Building in the appliance ^ Replace all the covers. To make sure the appliance is correctly fitted: – The door must close properly. – The door must not touch the furniture carcase. – The seal at the top edge of the handle side must fit properly. To double check place a torch in the appliance and close the doors. Turn the lights out in the room. If you can see any light shining out from the sides double check the installation. 48 49 50 51 Alteration rights reserved / 1310 K 9552 iD (-1), K 9752 iD (-1) M.-Nr. 07 470 031 / 03
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Page Mode : UseOutlines XMP Toolkit : 3.1-702 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2010:04:01 07:36:19+02:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2010:04:01 07:38:11+02:00 Metadata Date : 2010:04:01 07:38:11+02:00 Format : application/pdf Creator : demeie Title : K9552iD_gb.vp Document ID : uuid:8b9601fd-0d42-440f-a10b-516bdf5a4b4f Instance ID : uuid:62efbcb7-b897-4e2c-a92e-cb4530ba2f75 Page Count : 52 Author : demeieEXIF Metadata provided by EXIF.tools