Miele H 399 B User Manual To The 01d088c1 A2f8 4813 Ae81 988c9617521e

User Manual: Miele h 399 b to the manual

Open the PDF directly: View PDF .
Page Count: 12

Download
Open PDF In Browser	View PDF

Installation instructions

Oven
H 399 B

To avoid the risk of accidents
or damage to the appliance
it is essential to read these
instructions before it is installed
or used for the first time.

GiZr
M.-Nr. 05 741 720

Contents
General notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
H 399 B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Appliance and building-in dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Building in and connecting to services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Securing the oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2

General notes
Installation
This equipment is not designed for
maritime use or for use in mobile
installations such as caravans, aircraft
etc. However it may be suitable for
such usage subject to a risk assessment of the installation being carried
out by a suitably qualified engineer.

Keep these instructions in a safe place
and pass them on to any future owner
of the appliance.
All dimensions in this instruction booklet
are given in mm.

Important:
Do not fit insulation material inside
the housing unit. This would hinder the
intake of air to cool the appliance.

3

H 399 B
Appliance and building-in dimensions
d

540

845

5

20

550

516

30

h

478

860

473

b
e

89

5
0

c

g

56

f

a

845

478

c

f

89

5
0

56

b
4

860

g

473

d

e

550

475

540

5

20

h

H 399 B
Building in and connecting to
services
a Oven
b Building-in recess with full depth
floor panel
c Inlet for mains connection cable to
the appliance
d Isolator switch position. This should
preferably be located in the housing
unit to the right of the appliance. (Do
not locate the isolator switch behind
the appliance).

^ The filler strip is secured, as illustrated, to the underside of the
worktop inside the building-in recess.
^ Turn off the power supply at the isolator switch. See "Electrical connection".
^ Open cover panel g and connect
mains connection cable e to the isolator switch d, and then to the terminal block in the oven a.
See "Electrical connection" for connection diagram.

e Mains connection cable
f Mains connection cable loop
g Cover panel, behind which the terminals in the appliance are located.
h Filler strip HAL 90
Filler strip h is only required when
fitting an H 399 B into a base unit. It
is available to order through the
Spare Parts Dept.

516

473

478

478

4

30

4

h

5

H 399 B
Securing the oven

After it has been aligned the oven must
be secured in the housing unit.

j
j
^ Fit the fixing screws j (supplied) into
the vertical strip on the left hand side
of the appliance as shown in the illustration.

i

^ Reconnect the mains electricity supply to the isolator switch. See "Electrical connection" for further details.

i

^ Taking care not to trap or damage the
connection cable push the oven into
the recess up to the wooden transport protection i.
^ Remove the transport protection i
(see illustration), push the oven completely into the recess and align it.

6

^ Check all the appliance functions using the Operating Instructions supplied.

Electrical connection
Electrical connection UK/ZA
All electrical work should be undertaken by a suitably qualified and
competent person in strict accordance with national and local safety
regulations.
Installation, repairs and other work
by unqualified persons could be
dangerous. The manufacturer cannot be held responsible for unauthorised work.
Ensure power is not supplied to the
appliance while installation or repair
work is being carried out.
The appliance must only be operated when built-in. This is to ensure
that all electrical parts are shielded.
Live parts must not be exposed.

Connection of this appliance should be
made via a suitable isolator which complies with national and local regulations
and the on/off switch should be easily
accessible after the appliance has
been built in.
If the socket is not accessible after installation (depending on country) an
additional means of disconnection must
be provided for all poles.
For extra safety it is advisable to install
a residual current device with a trip current of 30 mA (in accordance with DIN
VDE 0664, VDE 0100 Section 739).
When switched off there must be an
all-pole contact gap of 3 mm in the isolator switch (including switch, fuses and
relays according to EN 60 335).

The voltage, rated load and fusing are
given on the data plate, visible inside
the side compartment. Ensure that
these match the household mains supply. Please quote these data, and the
model and serial number when contacting the Service dept.

7

Electrical connection
Important U.K.
This appliance is designed for connection to a single phase 230-240 V 50 Hz
supply using a suitable 3-core cable.
The wires in the mains lead are coloured in accordance with the following
code:
Green/yellow = earth
Blue

= neutral

Brown

= live

In other countries check these details
with your supplier.
WARNING
THIS APPLIANCE MUST BE
EARTHED

8

Electrical connection
Connection diagram

Important
The electrical safety of this appliance
can only be guaranteed when continuity is complete between the appliance
and an effective earthing system, which
complies with local and national regulations. It is most important that this basic
safety requirement is tested by a qualified electrician. The manufacturer cannot be held responsible for the consequences of an inadequate earthing system such as an electric shock.
The manufacturer can assume no responsibility for damage which is the direct or indirect result of incorrect installation or connenction.

9

10

11

Alteration rights reserved /

M.-Nr. 05 741 720 / V03

This paper consists of cellulose which has been bleached without the use of chlorine.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2002:09:26 07:24:10
Producer                        : Acrobat Distiller 4.05 for Windows
Modify Date                     : 2002:09:26 07:24:40+02:00
Page Count                      : 12
Page Mode                       : UseOutlines

EXIF Metadata provided by EXIF.tools