Mikrotikls SIA 931-2ND Digital Transmission System User Manual

Mikrotikls SIA Digital Transmission System

a href="https://usermanual.wiki/Mikrotikls-SIA" itemprop="url"> Mikrotikls SIA >

User Manual

RouterBOARD hAP seriesThe hAP is a simple home wireless access point. It is already configured, you can simply plug in your ISP cable and start using wireless internet. We recommend you to set up a password to secure your device, follow these steps.PoweringThe device accepts powering from the microUSB port. The port itself doesn't function as a standard microUSB port for data, it is only used for power. You can use any standard 0.5-2A USB adapter that usually come with smartphones. One 5V 0.7A USB charger is included in the box.The power consumption under maximum load can reach 3.5W.Setup1. Connect your internet cable to the first port, and, if you have wired devices, connect them to the other ports2. Set your computer IP configuration to automatic (DHCP)3. From your PC or smartphone, connect to the wireless network name which starts with “MikroTik”4. Once connected to the “MikroTik” wireless network, open http://192.168.88.1 in your web browser to start configuration, since there is no password by default, you will be logged in automatically. Set up your password in the screen that loadsConfigurationRouterOS includes many configuration options in addition to what is described in this document. We suggest to start here to get yourself accustomed to the possibilities: http://wiki.mikrotik.com/wiki/First_time_startup In case IP connection is not available, the Winbox tool can be used to connect to the MAC address of the device from the LAN side (all access is blocked from the internet port by default). In case you wish to boot the device from network, for example to use MikroTik Netinstall, hold the RESET button of the device when starting it until the LED light turns off, and unit will start to look for Netinstall servers.Extension Slots and PortsThe Ethernet ports are connected through a switch chip, can be configured individually and support automatic cross/straight cable correction (Auto MDI/X), so you can use either straight or cross-over cables for connecting to other network devicesIntegrated wireless module which supports AP/CPE/P2P/Repeater modesButtons and JumpersThe reset button has three functions:Hold this button during boot time until LED light starts flashing, release the button to reset all RouterOS configuration (total 5 seconds) in case you have forgotten your passwordKeep holding for 5 more seconds, LED turns solid, release now to turn on CAP mode (total 10 seconds). CAP mode allows this device to be controlled by a CAPsMAN serverOr keep holding the button for 5 more seconds until until LED turns off, then release it to make the RouterBOARD look for Netinstall servers (total 15 seconds) for reinstalling the OSOperating System SupportCurrently tested operating system is MikroTik RouterOS starting from version 6.34See www.routerboard.com for more information. Contact support@mikrotik.com 5-Jul-16
Federal Communication Commission InterferenceStatement (FCC ID: TV7931-2ND)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determinedby turning the equipment off and on, the user is encouraged to try to correct the interference by oneof the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This device and its antenna must not be co-located or operation in conjunction with any other antenna or transmitter.IMPORTANT: Exposure to Radio Frequency Radiation.20 cm minimum distance has to be maintained between the antenna and user. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environmentcan be satisfied.Antenna Installation. WARNING: It is installer's responsibility to ensure that when using the authorized antennas in the United States (or where FCC rules apply); only those antennas certified with the product are used. The use of any antenna other than those certified with the product is expressly forbidden in accordance to FCC rules CFR47 part 15.204. The installer should configure theoutput power level of antennas, according to country regulations and per antenna type. Professional installation is required of equipment with connectors to ensure compliance with health and safety issues. Industry Canada (IC:7442A-9312ND) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doitpas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.See www.routerboard.com for more information. Contact support@mikrotik.com 5-Jul-16
Download:
Mirror Download [FCC.gov]
Document ID3187297
Application IDdTqK7ylI1mCO07QQtGpSIA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize10.13kB (126647 bits)
Date Submitted2016-11-04 00:00:00
Date Available2016-11-04 00:00:00
Creation Date2016-07-05 16:20:26
Producing SoftwareLibreOffice 5.1
Document Lastmod0000-00-00 00:00:00
Document TitleUser Manual
Document CreatorWriter
Document Author: Normis
FCC ID Filing: TV7931-2ND

Navigation menu