Mikrotikls SIA MAPL2ND Digital Transmission System 2412-2462 MHz User Manual

Mikrotikls SIA Digital Transmission System 2412-2462 MHz

User Manual

RouterBOARD mAP liteQuick Setup Guide and Warranty InformationThe mAP is a small AP device with one ethernet port, the Ethernet port supports powering by PoE. First use1. Plug the included USB power adapter into the power socket, and connect the USB cable to the mAP lite2. Connect your Internet cable to the mAP lite Ethernet port3. Wireless AP mode is enabled by default, you can connect from your computer to the SSID “MikroTik”. Loginto the mAP router from your web browser by opening 192.168.88.1 in the address barPoweringThe device accepts powering from the USB port or from the Ethernet port:micro USB power jack accepts 5V DC, a USB 5V adapter is included with the productThe Ethernet port accepts passive Power over Ethernet 11-57V DC. The Ethernet port also accepts PoE power from a 802.3af switch over the pins +4,5/-7,8 or +3,6/-1,2Under maximum load, the power consumption of this device is 4W.Booting processThe device is preinstalled with MikroTik RouterOS software. It can be configured in several ways.This device doesn't come fitted with a Serial Port connector, so initial connection has to be done via the Ethernetcable. Connect to wireless SSID “MikroTik” and open 192.168.88.1 in your web browser. Username is adminand there is no password. In case IP connection is not available, Winbox can be used to connect to the MACaddress of the device. More information here: http://wiki.mikrotik.com/wiki/First_time_startupIn case you wish to boot the device from network, for example to use MikroTik Netinstall, hold the RESET buttonof the device when starting it until the LED light turns off, then release the button and the device will startlooking for Netinstall servers.By default, the device is preconfigured with a simple firewall on the WAN port, this configuration can be viewedwhen first connecting to the Router via Winbox. It will ask whether to keep this configuration or clean it to useyour own. LAN/WLAN ports have DHCP server enabled.Extension Slots and PortsOne 10/100 Ethernet port, supporting automatic cross/straight cable connection (Auto MDI/X), so youcan use either straight or cross-over cables for connecting to other network devices. One Integrated Wireless 2.4GHz 802.11b/g/n 2x2 MIMO, Onboard PIF antennas, max gain 2dBiOne microUSB 2.0 port for powering onlyResetting the deviceIn case you wish to return the device to its original configuration, you can use the RESET button. Hold this buttonduring boot time until LED lights start flashing, then release the button to reset RouterOS configuration. Youcan use this procedure if you have forgotten the password to access the device, or simply wish to return the unitto its default configuration state. 
Buttons and Jumpers1. Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS configuration (total 5 seconds)2. Keep holding for 5 more seconds, LED turns solid, release now to turn on CAPs mode (total 10seconds)3. Or Keep holding the button for 5 more seconds until until LED turns off, then release it to make theRouterBOARD look for Netinstall servers (total 15 seconds)Operating System SupportCurrently tested operating system is MikroTik RouterOS starting from version 6.30Copyright and Warranty informationCopyright MikroTikls SIA. This document contains information protected by copyright law. No part of it may bereproduced or transmitted in any form without prior written permission from the copyright holder. RouterBOARD,RouterOS, RouterBOOT and MikroTik are trademarks of MikroTikls SIA. All trademarks and registered trademarksappearing in this document are the property of their respective holders.Hardware. MikroTik warrants all RouterBOARD series equipment for the term of twelve (12) months from theshipping date to be free of defects in materials and workmanship under normal use and service, except in case ofdamage caused by mechanical, electrical or other accidental or intended damages caused by improper use or dueto wind, rain, fire or other acts of nature.To return failed units to MikroTik, you must perform the following RMA (Return Merchandise Authorization)procedure. Follow the instructions below to save time, efforts, avoid costs, and improve the speed of the RMAprocess.1. If you have purchased your product from a MikroTik Reseller, please contact the Reseller company regardingall warranty and repair issues, the following instructions apply ONLY if you purchased your equipment directlyfrom MikroTik in Latvia.2. MikroTik does not offer repairs for products that are not covered by warranty. Exceptions can be made for:CCR1016-12G, CCR1016-12G-BU, CCR1036-12G-4S, RB1100, RB1100AH, RB1100AHx2, RB1200, RB600,RB600A and RB800 as a paid service (fees apply).3. Out-of-warranty devices and devices not covered by warranty sent to Mikrotik will be returned to thesender at sender's cost. If the customer has not organized return of such rejected devices within 12 monthsfrom the day of arrival, MikroTik has the right to discard them. RMA Instructions are located on our webpage here: http://rma.mikrotik.comThis document is provided “as is” without a warranty of any kind, expressed or implied, including, but not limitedto, the implied warranty of merchantability and fitness for a particular purpose. The manufacturer has madeevery effort to ensure the accuracy of the contents of this document, however, it is possible that it may containtechnical inaccuracies, typographical or other errors. No liability is assumed for any inaccuracy found in thispublication, nor for direct or indirect, incidental, consequential or other damages that may result from such aninaccuracy, including, but not limited to, loss of data or profits. Please report any inaccuracies found tosupport@mikrotik.com 
Federal Communication Commission Interference Statement (FCC ID: TV7MAPL2ND)This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and usedin accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, which can be determinedby turning the equipment off and on, the user is encouraged to try to correct the interference by oneof the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.Consult the dealer or an experienced radio/TV technician for help.FCC Caution: Any changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.This device and its antenna must not be co-located or operation in conjunction with any other antennaor transmitter.IMPORTANT: Exposure to Radio Frequency Radiation.20 cm minimum distance has to be maintained between the antenna and the user. Under suchconfiguration, the FCC radiation exposure limits set forth for an population/uncontrolled environmentcan be satisfied.Industry Canada (IC:7442A-MAPL2ND) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject tothe following two conditions: (1) this device may not cause interference, and (2) this device mustaccept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exemptsde licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pasproduire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectriquesubi, même si le brouillage est susceptible d'en compromettre le fonctionnement.See www.routerboard.com for more information. Contact support@mikrotik.com for support questions
CE Declaration of ConformityFull Declaration of Conformity (DoC) may be obtained by visiting this web page: http://routerboard.com/doc/ !"# $%& '()*+,-).(/"# # *+0,*1+/*2"##"#"33234415 1"! 6 789:;<=>:;& '()*+,-). (/ ?>@A8BCB8& D> *+0,*1+/*2 > E 9F;:E>:9:EC> 9F9 9F=>9:E>7C:> CGC9@E87C< C ?BHIC:>JBCA;KCLCB8GJ;B>?MC78NCB>@:CE844O P# '()*+,-).(/Q#"RS&T*+0,*1+/*2"USPV"WT3%3R#XW"RV3Y442) 2# 0!'()*+,-).(/"Z#3&["!% *+0,*1+/*23#"3Z"!3![3!"33344\2 5 $ "] '()*+,-). (/  #  5] *+0,*1+/*2  ^!   !"! /!  _!#"]!!1!*#"445`  )]"3!  '()*+,-). (/  *+0,*1+/*2 33 3 44^ a#a" S  3"3""S#"]"5* 5 bcdefghijklhjmhdhlmckhldel'()*+,-).(/neopfcqjdq*+0,*1+/*2lkbbjirpfcdhqgijldqljklqpncqlhghqdelcqlmhqdqlojqgcllscdqmclnqhdhtcqldeljneuqhl44cm # v " & '()*+,-). (/ "   *+0,*1+/*2 "  " " %  w!"3 "2344(, ("  "  '()*+,-). (/ # #  *+0,*1+/*2 x    P"  "" " P """y344.z .3 /R'()*+,-).(/"{&*+0,*1+/*2"2|344)}S~•~|S., .# €'()*+,-).(/"S&R*+0,*1+/*2"34412%3$0 $! / '()*+,-). (/ PP" S"& #!%  *+0,*1+/*2 Q• P‚ "SW P "3ƒ „3"‚% ‚ V 44)V%"3!#VP…3P†"P‚. 2# $S 3" '()*+,-). (/  # " " *+0,*1+/*2  3!    ‡"     "3"!3#"S445v. v"# SP% '()*+,-). (/ "S ˆ *+0,*1+/*2 S P!% P PP% %!  % ‰Š% 2%%%44v, v! &'()*+,-).(/"*+0,*1+/*23a"32344*+ * vP&'()*+,-).(/"‹‹" *+0,*1+/*2Œ•"•"Ž"3"2344) "3 '()*+,-).(/•3%#"S&T*+0,*1+/*2•UPV"‚T3%3R%W"R‚344( "3 '()*+,-).(/PS3"S&S*+0,*1+/*23"P3P#3!"3"‘"344\( \# '()*+,-). (/ 3… ] …] *+0,*1+/*2 %% "  3 44’ """ 3 S ] 33#S # Härmed intygar MIKROTĪKLS SIA att denna RouterBOARD är i överensstämmelse med de väsentligaegenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.+ ! '()*+,-).(/"Z#3*+0,*1+/*23!"!!3![3!"33344\EN. Instruction manual: Connect the power adapter to turn on the device. Open 192.168.88.1 in your web browser, to configure it. Moreinformation on http://wiki.mikrotik.com B G . Инструкция:Свържете адаптера на захранване, за да включите устройството. Отворете192.168.88.1 в уеб браузър, за да настроите продукта. Повече информация в http://wiki.mikrotik.com CZ. Návod k použití: Připojtenapájecí adaptér k zapnutí přístroje. Otevřete 192.168.88.1 ve webovém prohlížeči pro konfiguraci produktu. Více informací najdete vhttp://wiki.mikrotik.com DK. Instruktionsbog: Tilslut strømadapteren for at tænde for enheden. Åbn 192.168.88.1 i en webbrowser til atkonfigurere produktet. Mere information i http://wiki.mikrotik.com FR. Mode d'emploi: Connectez l'adaptateur d'alimentation pour allumerl'appareil. Ouvrez 192.168.88.1 dans un navigateur Web pour configurer le produit. Plus d'informations dans http://wiki.mikrotik.com DE.Bedienungsanleitung: Verbinden Sie das Netzteil, um das Gerät einzuschalten. Öffnen Sie 192.168.88.1 in einem Web-Browser, um dasProdukt zu konfigurieren. Weitere Informationen im http://wiki.mikrotik.com EE. Kasutusjuhend: Ühendage toiteadapter seadmesisselülitamiseks. Avatud 192.168.88.1 in veebilehitseja seadistada toodet. Rohkem teavet http://wiki.mikrotik.com ES. Manual deinstrucciones: Conecte el adaptador de alimentación para encender la unidad. Abra 192.168.88.1 en un navegador web para configurar elproducto. Más información en http://wiki.mikrotik.com IT. Manuale di istruzioni: Collegare l'adattatore di alimentazione per accendere l'unità.Aprire 192.168.88.1 in un browser Web per configurare il prodotto. Maggiori informazioni in http://wiki.mikrotik.com LV. Lietošanasinstrukcija: Pievienojiet Strāvas adapteri, lai ieslēgtu ierīci. Atvērt 192.168.88.1 ar interneta pārlūku, lai konfigurētu produktu. Plašākainformācija http://wiki.mikrotik.com LT . Naudojimosi instrukcija: Prijunkite maitinimo adapterį įjunkite įrenginį. Į interneto naršyklę192.168.88.1 Atidarykite galite konfigūruoti gaminį. Daugiau informacijos rasite http://wiki.mikrotik.com HU . Használati utasítás:Csatlakoztassa a hálózati adaptert a készülék bekapcsolásához. Megnyitása 192.168.88.1 egy webböngészőben beállítani a terméket. Többinformáció http://wiki.mikrotik.com NL. Handleiding: Sluit voedingsadapter aan op het apparaat in te schakelen. Open 192.168.88.1 in eenwebbrowser om het product te configureren. Meer informatie in http://wiki.mikrotik.com PL. Instrukcja obsługi: Podłącz adapter zasilania, abywłączyć urządzenie. Otwórz 192.168.88.1 w przeglądarce internetowej, a b y skonfigurować urządzenie. Więcej informacji whttp://wiki.mikrotik.com PT. Manual de instruções:Conecte o adaptador de alimentação para ligar o aparelho. Abra 192.168.88.1 em umnavegador da web para configurar o produto. Mais informações em http://wiki.mikrotik.com RO. Instrucțiuni de utilizare : Conectați adaptorulde alimentare pentru a porni aparatul. Deschide 192.168.88.1 într-un browser web pentru a configura produsul. Mai multe informații înhttp://wiki.mikrotik.com SK. Návod na použitie:Pripojte napájací adaptér k zapnutiu prístroja. Otvorte 192.168.88.1 vo webovom prehliadačipre konfiguráciu produktu. Viac informácií nájdete v http://wiki.mikrotik.com SI . Navodila: Priključite napajalnik za vklop naprave. Odprite192.168.88.1 v spletnem brskalniku nastaviti izdelek. Več informacij v http://wiki.mikrotik.com FI. Käyttöohje: Kytke virtalähde päälle laitteen.Avaa 192.168.88.1 in selaimen määrittää tuotteen. Lisää tietoa http://wiki.mikrotik.com SE. Instruktionsmanual: Anslut nätadaptern för att slåpå enheten. Öppna 192.168.88.1 i en webbläsare för att konfigurera produkten. Mer information på http://wiki.mikrotik.com NO.Bruksanvisningen: Koble strømadapteren for å slå på enheten. Åpne 192.168.88.1 i en nettleser for å konfigurere produktet. Mer informasjonpå http://wiki.mikrotik.com G R . εγχειρίδιο οδηγιών:Συνδέστε τον προσαρμογέα τροφοδοσίας για να ενεργοποιήσετε τη μονάδα. Ανοίξτε192.168.88.1 σε ένα πρόγραμμα περιήγησης στο Web για να διαμορφώσετε το προϊόν. Περισσότερες πληροφορίες στο http://wiki.mikrotik.com  

Navigation menu