Mikrotikls SIA R52 MINI PCI ADAPTER, ROUTER BOARD R52 User Manual Quick Install Guide

Download:
Mirror Download [FCC.gov]
Document ID	865275
Application ID	SM1tiuGV0IHwZuNVzyvlgQ==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	45.59kB (569890 bits)
Date Submitted	2007-11-07 00:00:00
Date Available	2007-11-07 00:00:00
Creation Date	2007-11-06 14:47:49
Producing Software	OpenOffice.org 2.2
Document Lastmod	0000-00-00 00:00:00
Document Title	Quick Install Guide
Document Creator	Writer
Document Author:	Ong

RouterBOARD
Introduction
Quick Install Guide
Mikrotik
Wireless
Mini PCI Adapter
RouterBOARD R52
Version 1.1
This mini PCI adapter, RouterBOARD R52 contains a dual-mode
single chip MAC/BB/Radio for IEEE 802.11a, 11g and 11b Wireless
LAN. It can support high-speed data transmission of up to 54 Mbps
in the 2.4GHz and 5GHz frequency bands based on 802.11b/g and
802.11a respectively.
Based on the latest industry standard Wi-Fi Certified IEEE 802.11a/g
specification, the RouterBOARD R52 offers maximum channel
speeds of up to 54 Mbps. It supports key security features like Wi-Fi
Protected Access (WPA), WPA2, WEP and 802.1x.
You can find this adapter that is seated inside the wireless products
such as the notebook computers or any other devices containing Mini
PCI socket. R52 can be removed from or inserted on the PCBA of the
RouterBOARD® products.
Package Content
RouterBOARD R52 retail package contains the following items:
•
1 x RouterBOARD R52 Wireless Mini PCI adapter
Application of Mini PCI
1.
Align the R52 adapter to the Mini PCI socket.
2.
Adjust and push down the R52 adapter gently until the metallocking levers aside from the Mini PCI socket is fastened.
!! R52 adapter can only fit in one direction due to the
keyed notch. Wrong orientation will cause improper
installation and may damage the Mini PCI socket !!
3.
Connect antenna/s on R52 adapter.
FCC NOTICE (FCC ID: TV7-R52) This device has been tested
and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a
residential installation. This device generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this device does cause
harmful interference to radio or television reception, the user is
encouraged to try to correct the interference by one or more of the
following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the affected equipment and
(3) receiver.
Connect the affected equipment to a power outlet on a different
(4) circuit from that which the receiver
is connected to.
Consult the dealer or an experienced radio / TV technician for
help.
Caution: Any changes or modifications not expressly approved by
the grantee of this device could void the user's authority to operate
the equipment.
FCC Compliance Statement: This device complies with Part 15 of
the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Products that contain a radio transmitter are labeled with FCC ID
and may also carry the FCC logo.
Caution: Exposure to Radio Frequency Radiation.
To comply with the FCC RF exposure compliance requirements, the
following antenna installation and device operating configurations
must be satisfied:
For configurations using an approved external antenna, the
separation distance between the antenna and any person’s body
(including hands, wrists, feet and ankles) must be at least 65cm
(25.6 inches).
Caution: Professional Installation Attestation
MIKROTIKLS SIA addresses the following items to ensure
that the above referenced equipment is professionally installed:
(1) The TV7-R52 will only be sold by MIKROTIKLS SIA or one
of its authorized dealers. MIKROTIKLS SIA and its
authorized dealers will be under strict marketing control and
will only market and sell the TV7-R52 to professionals.
(2) Professional installation is required for the TV7-R52 and will
be performed only by someone knowledgeable of its use.
MIKROTIKLS SIA will ensure that the TV7-R52 is only
marketed and sold to professionals.
(3) The TV7-R52 is not sold to the general public and is sold only
for industrial or commercial use by professional installers.
List of approved antennas and power settings used for Class 2
permissive change. Installer shall be responsible for ensuring that
the proper antenna is employed so that the limits in FCC Part 15 are
not exceeded.
5.725-5.825 Ghz
Gain (dBi)
Power settings
EIRP
Limit
Operational Mode
Omni
Antenna Type
OD58-12
Model number
12
18
30
36
PTMP
Panel
PA58-24
24
18
42
53
PTP
Dish
DA5W-32-DP
32
18
50
53
PTP
Grid Dish
GD5W-28P
28
18
46
53
PTP
Sector
SA58-90-17-WB
17
18
35
47
PTP
Sector
SA58-90-17-WB
17
18
35
36
PTMP
2.4Ghz (802.11b)
Gain (dBi)
Power settings
EIRP
Limit
Operational Mode
Omni (vertical)
Antenna Type
OD24-12
Model number
12
19
31
36
PTMP
Omni (horizontal)
ODH24-13
13
19
32
36
PTMP
Sector
SA24-90-17
17
19
36
43
PTP
Sector
SA24-90-17
17
19
36
36
PTMP
Grid (die cast)
DC24HDPF1P
24
19
43
48
PTP
Panel
PA24-19
19
19
38
44
PTP
DECLARATION OF CONFORMITY: MIKROTIKLS SIA
declares that the product:
Product Name: Mikrotik RouterBoard R52 Wireless Mini PCI
Adapter
Model No.: R52
conforms to the following Product Standards:
Radiated Emission Standards: ETSI EN 300 328-2: July 2000;
FCC: 47 CFR Part 15, Subpart B, ANSI C63.4-1992; 47 CFR Part
15, Subpart C (Section 15.247), ANSI C63.4-1992.
Conducted Emission Standards: ETS 300 826: Nov. 1997.
Immunity Standards: IEC 801-2; IEC 801-3; IEC 801-4
Low Voltage Directive: EN 60 950:1992+A1: 1993+A2:
1993+A3; 1995+A4; 1996+A11: 1997
Therefore, this product is in conformity with the following regional
standards: FCC Class B – following the provisions of FCC Part 15
directive; CE Mark – following the provisions of the EC directive.
Manufacturer’s Name: Mikrotik, SIA
Address: 46 Pernavas street ,
Riga, LV-1009, Latvia
Disclaimer: Mikrotikls, SIA provides this guide without warranty
of any kind, either expressed or implied, including but not limited to
the implied warranties of merchantability and fitness for a particular
purpose. Mikrotikls, SIA may make improvements and/or changes
to the product and/or specifications of the product described in this
guide, without prior notice. Mikrotikls, SIA will not be liable for
any technical inaccuracies or typographical errors found in this
guide. Changes are periodically made to the information contained
herein and will be incorporated into later versions of the guide. The
information contained is subject to change without prior notice.
Trademark Information: Mikrotik® and RouterBOARD® are
registered trademarks of Mikrotikls, SIA. All other brand and
product names are trademarks or registered trademarks of their
respective owners.
Notice: Copyrights © 2004 by MIKROTIKLS SIA. All rights
reserved. Reproduction, adaptation, or translation without prior
permission of MIKROTIKLS SIA is prohibited, except as allowed
under the copyright laws.
Manual Number: M-R52-1.1A
September 2007

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 2
Title                           : Quick Install Guide
Author                          : Ong
Creator                         : Writer
Producer                        : OpenOffice.org 2.2
Create Date                     : 2007:11:06 14:47:49+02:00

EXIF Metadata provided by EXIF.tools