Mipro Electronics Co 101ACT Wireless Microphone User Manual ACT707D FCC

Download:
Mirror Download [FCC.gov]
Document ID	307999
Application ID	p7Zd/6ktuQ9uYk27IvMuFg==
Document Description	User Manual 1 of 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	288.52kB (3606447 bits)
Date Submitted	2003-03-06 00:00:00
Date Available	2003-03-06 00:00:00
Creation Date	2003-03-06 13:23:30
Producing Software	Corel PDF Engine Version 9.397
Document Lastmod	2003-03-06 13:23:52
Document Title	ACT707D(FCC).cdr
Document Creator	CorelDRAW Version 9.397

ACT-Series Dual Channel Wireless Receiver
Instruction Manual
Electronics Co., Ltd.
Head office: 814, Pei-Kang Road, Chiayi, 600, Taiwan.
Taipei office: 5, Lane 118, Sung-teh Road, 100, Taipei, Taiwan.
Web-http: //www.mipro.com.tw
E-mail: mipro@mipro.com.tw
2CE128
1- rack Frame
ACT-function
Color LCD Panel
Dual 100 Preset Channels
ACT DUAL CHANNEL WIRELESS RECEIVER
CONTENTS
1. INTRODUCTION
ACT DUAL CHANNEL WIRELESS RECEIVER
1. INTRODUCTION
2. PARTS NAME AND FUNCTIONS
2-3
3. INSTALLATION OF THE RECEIVER
4-5
4. RECEIVER OPERATING PROCEDURES
5. CAUTIONS
6. OPERATION OF RECEIVER WITH LCD DISPLAY PANEL
7-13
Thanks for choosing the most advanced dual channel wireless receiver
system from MIPRO.
Please read this manual thoroughly for correct operating and optimal
performance.
ACT-707D is an international EIA standard, 1-rack, true diversity metal
receiver. It features the world's first ACT-function, color LCD panel displaying
multiple statuses. It allows rapid change of channels, offers non-interfering
channel selection and eliminates spurious interference. Other unique features
include a built-in switch-mode power supply, an antenna divider system and
independent or mixed outputs. It's 1-rack, dual-channel design saves space
and reduces installation time. Another great value system! The ideal choice for
dual-channel receives in one rack space!
HANDHELD WIRELESS MICROPHONE
1. PARTS NAME AND FUNCTIONS
14
2. BATTERY INSERTION
15
3. OPERATING INSTRUCTIONS
15
4. CAUTIONS
15
Included Accessories
Antenna 2
Power Cable
Audio Output Cable
BELT PACK TRANSMITTER
1. PARTS NAME AND FUNCTIONS
16-17
2. OPERATING INSTRUCTIONS
17
3. AF 4-PIN INPUT CONNECTION METHODS
18
4. BATTERY INSERTION
19
5. CAUTIONS
19
Instruction Manual 1
Rack-mount Brackets
1-pair
ACT DUAL CHANNEL WIRELESS RECEIVER
ACT DUAL CHANNEL WIRELESS RECEIVER
2. PARTS NAME AND FUNCTIONS
Rear Panel
Front Panel
MIC
LINE
ON
ACT
RF
AF
ANT
BAT
A B
G/CH
VOL
FREQ
SQ
NAME
REMO
ACT
RF
AF
ANT
BAT
A B
G/CH
VOL
FREQ
SQ
NAME
REMO
MHz
MENU
GROUP
TV CH
CHANNEL
MHz
MENU
TV CH
GROUP
CHANNEL
ACT-707D Wireless Receiver
POWER
8 9
10
11
12
13
14
(Fig.2)
(Fig.1)
(6)
Rear Antenna B input Connector: B Antenna connector can be
installed with antenna directly and provides power for antenna booster..
(1) Front Antenna A Input Connector : Allows an optional rear-to-front
Antenna kit for front antenna placement.
(7)(11) Balanced Audio Output Jack: With Cannon / XLR type connector
provides balanced audio output signal from this jack to the amplifier.
(2) Power Switch & Indicator: When switch is turned on, red indicator
illuminates to denote normal power status.
(8)
Unbalanced Audio Mixed Output Jack : With 1/ 4
Phone Jack
provides the mixed unbalanced audio output signal from this jack to the
amplifier.
(4) Receiver Panel B : Color LCD Panel B.
(9)
(5) Front Antenna B Input Connector : Allows an optional rear-to-front
Antenna kit for front antenna placement.
Unbalanced Level Switch: "MIC" selection is for "Microphone-level"
output. "LINE" selection is for "Line-out" level output.
(10)
DC 12V Input Jack: To connect 12 VDC from the AC/DC adapter.
(12)
AC Input Jack: To connect 85 ~ 265 Volts AC power.
(13)
Rear Antenna A input Connector: A Antenna connector can be installed
with antenna directly and provides power for antenna booster.
(14)
Rackmount Bracket: To install the receiver into an EIA 19-inch standard
rack case.
(3) Receiver Panel A : Color LCD Panel A.
ACT DUAL CHANNEL WIRELESS RECEIVER
ACT DUAL CHANNEL WIRELESS RECEIVER
(b) Unbalanced Output: Using audio output cable attached with "PHONE
PLUG" type, connect one end from the unbalanced output jack (8) of the
receiver, and the other end to the "LINE-IN" input jack of the amplifier, as
shown in Fig. 3.
3. INSTALLATION OF THE RECEIVER
MIC
LINE
(c) Balanced Output: Using audio output cables attached with "XLR" or
"Cannon" type, connect one end from the balanced output jacks (7) of the
receiver, and the other end to the "MIC IN" input jack of the mixer or
amplifier, as shown in Fig. 3. (The characteristic of the 3-pin connector is
as shown in Fig. 6
(d) Guitar Output: Using audio output cable attached with "PHONE PLUG" type,
plug one end from the unbalanced output jack of a receiver, and the other
end to the input jack of a guitar amplifier. Switch the Level Switch (9) to
"LINE" position.
(Fig.3)
1.
Install 2 separate antennas on the antenna sockets (6), (13) on the rear
panel. Illustrated in figure 3.
2.
Power Output Connection:
(a) Connect the AC/DC adapter cable to DC 12V INPUT JACK (10), then plug the
adapter unit into an appropriate AC outlet with caution to the correct voltage
under both AC outlet and adapter marked, as shown in fig. 4.
(b) With the appropriate AC power cable connects from AC Input Jack (12) to an
AC outlet under the marked voltage 85~265 V, as shown in Fig. 5.
(Fig.4)
3.
(Fig.6)
1: GND
2: HOT +
3: COLD -
(Fig.7)
(Fig.8)
4.
To ensure best reception possible, receiver must be installed at least one
meter above ground. In addition, the distance between transmitter and
receiver must be more than one meter and away from noise. (Shows in
figure 7)
5.
On the front panel of the receiver, 4 openings are pre-drilled for instant
installation on the standard 19-inch rack case. (Shows in figure 8)
(Fig.5)
Audio Output Connection:
(a) Unbalanced Level Switch (9) Setting Position: When inputs the unbalanced
output of a receiver into "AUX-IN" input jack of a mixer or amplifier or "Electric
Guitar", switch the Level Switch (9) to the right "LINE" position. Low
sensitivity may occur if switch to the wrong position. When input the
unbalanced output of a receiver into the "MIC-IN" input jack of a mixer or
amplifier; switch the Level Switch (9) to the left "MIC" position. Over load
distortion may occur if switch to the wrong position. When using electric guitar,
don't use "MIC" position as it may have generated insufficient level.
ACT DUAL CHANNEL WIRELESS RECEIVER
ACT DUAL CHANNEL WIRELESS RECEIVER
6. Operation of Receiver with LCD Display Panel
4. RECEIVER OPERATING PROCEDURES
1.
Turn volume controls of the mixer in use to a minimum setting before turn
on the microphones or transmitters. After switches on the receiver, the
power switch red indicator illuminates to denote normal power status.
2.
Under normal circumstances, the RF indicator lights up when a
microphone or transmitter is turned on near the receiver to indicate the
receiver is ready for normal operation. Once sounds to the microphone
and the AF indicators will glow according to the strength of sound level.
If no LED glows or no sound outputs, the system is not function properly,
thus it must be checked
3.
1. Full Display of LCD Screen and Locations of buttons
RF
ACT
AF
ANT
BAT
A B
G/CH
FREQ
SQ
VOL
NAME
REMO
MHz
GROUP
TV CH
MENU
CHANNEL
The microphone output level needs to be adjusted at the amplifier or
mixer. No need to adjust at the receiver itself.
2. Designations of buttons and Functions
MENU: Enable user to select from one function to the other
"MENU" button allows user to select among 6 options (in the sequence
showing below) that each is surrounded in a square frame and shown on the
upper half of LCD display. Detail functions and operations are as follows.
5. CAUTIONS
1.
2.
3.
When using DC power supply, please be aware of the operating voltage.
First of all, please make sure minimum of 12 volts can be obtained for
function properly. However, the power supply should not exceed its
maximum capacity of 15 volts. When the supply voltage is more than 15
volts, the system will suffer severe internal damage. It is preferred the
power source is from a regulated power with the minimum current of 1 A.
G/CH
FREQ SQ VOL
NAME REMO
(1) G/CH: Indicates or setups the receiver GROUP and CHANNEL.
Use only MIPRO standard antenna to ensure the sensitivity of the
receiver.
ACT
Antenna socket has 8-volts DC power supply; please do not short the
circuit of this part.
MENU
RF
AF
ANT
BAT
A B
G/CH
FREQ
SQ
VOL
NAME
REMO
GROUP
TV CH
CHANNEL
A. Operating Procedures.
MENU
G/CH
GROUP
DOWN
MENU
CHANNEL
DOWN
UP
UP
MENU
Save
EXIT
ACT DUAL CHANNEL WIRELESS RECEIVER
ACT DUAL CHANNEL WIRELESS RECEIVER
A. Operating Procedures.
B. How to Operate?
a. In the lower row of LCD display, TV CHANNEL, GROUP, and CHANNEL are
separately shown in dual-digit numbers (from left to right).
b. Push "UP" or "DOWN" button once and the number above "GROUP" will start
blinking. Push "UP" or "DOWN" button now will permit user to change to another
pre-programmed group. Push "MENU" button to confirm the modification and group
number will stop blinking.
MENU
RF
AF
ANT
BAT
A B
G/CH
FREQ
SQ
VOL
NAME
REMO
MENU
01
DOWN
EXIT
save
UP
B. How to Operate?
a. User can set the squelch level within the range of 01-99.
b. To set the squelch level, simply by pushing the "UP" or "DOWN" button and confirm
the modification by pushing "MENU" button.
(2) FREQ: Indicates the frequency that is currently in use.
ACT
SQ
(4) VOL: Indicates Volume Level is at On or Mute position.
MHz
MENU
RF
ACT
AF
ANT
BAT
A B
G/CH
FREQ
SQ
VOL
NAME
REMO
MENU
A. Operating Procedures.
MENU
FREQ
Switching From Audible To Mute
A. Operating Procedures.
B. How to Operate?
MENU
a. After push "MENU" button and select the "FREQ" frame, it will show the frequency
that is set under the GROUP and CHANNEL that one had selected previously.
b. This function cannot be used for frequency alternation.
VOL
MUTE
DOWN
EXIT
UP
B. How to Operate?
Push "UP" or "DOWN" Button allows one to switch volume to "ON" or "Mute" status.
(3) SQ: Indicates or setups the Squelch level.
C. CAUTIONS :
ACT
RF
AF
ANT
A B
BAT
G/CH
FREQ
SQ
VOL
NAME
REMO
AF bar and Ant. A, B of LCD panel will not displayed when the receiver module is
at Mute status. To ascertain if receiver is at Mute status, press Menu key, select
Volume. If LCD indicates "Mute" it is a Mute status. If LCD indicates "On" audio is
operating normally.
MENU
ACT DUAL CHANNEL WIRELESS RECEIVER
(5) NAME: Indicates or setups the name of current channel user.
RF
ACT
AF
ANT
BAT
A B
G/CH
FREQ
SQ
VOL
NAME
REMO
ACT DUAL CHANNEL WIRELESS RECEIVER
Operation of ACT Feature:
RF
ACT
AF
ANT
A B
BAT
G/CH
FREQ
SQ
VOL
NAME
REMO
MENU
MENU
A. Operating Procedures.
MENU
NAME
MENU
DOWN
UP
A. Operating Procedures.
NEXT
ACT
MENU
DOWN
UP
ACT
EXIT
EXIT
save
B. How to Operate?
a. At LCD panel displays "Group" and "Channel" mode keystroke "ACT"
button . ACT mode is activated when "ACT" word appears on the
LCD panel.
b. Position the "ACT" marking of the transmitter about 30cm (12-inch)
towards the "ACT" button on the receiver. (see below figure)
c. ACT function will release automatically once the transmitter channel is
locked on. Simultaneously, "Group" and "Channel" mode will be
back showing on the LCD panel.
B. How to Operate?
a. Maximum 6 characters are allowed (Select from capitalized English letter, numbers,
+ - x /, and space).
b. Push "UP" or "DOWN" button into setup mode and the character on the far left will
start blinking. (There will be no blinking if there is no character in the specific space).
c. Push "UP" or "DOWN" button to select desired character and confirm by pushing the
"MENU" button. Once confirmed, the next character will start blinking and ready for
setup.
d. Repeat step c until ALL 6 characters are set.
ACT
10
11
ACT DUAL CHANNEL WIRELESS RECEIVER
NOTE
ACT DUAL CHANNEL WIRELESS RECEIVER
NOTE
12
13

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2003:03:06 13:23:52-08:00
Create Date                     : 2003:03:06 13:23:30-08:00
Title                           : ACT707D(FCC).cdr
Creator                         : CorelDRAW Version 9.397
Producer                        : Corel PDF Engine Version 9.397
Page Count                      : 8

EXIF Metadata provided by EXIF.tools