Mipro Electronics Co 707H Wireless Microphone User Manual ACT707H

Download:
Mirror Download [FCC.gov]
Document ID	223410
Application ID	IyAu4uUEYK646jzVcTxcUw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.73kB (121604 bits)
Date Submitted	2002-01-29 00:00:00
Date Available	2002-01-29 00:00:00
Creation Date	2001-12-06 14:19:23
Producing Software	Acrobat PDFWriter 5.0Windows NT ª©
Document Lastmod	2002-01-29 18:38:01
Document Title	ACT707H說明書.cdr
Document Creator	CorelDRAW 9 - [ACT707H說明書.cdr]
Document Author:	candy

LCD DISPLAY
WIRELESS MICROPHONE SYSTEM
Instruction Manual
Electronics Co., Ltd.
Headoffice:814,Pei-KangRoad,Chiayi,600,Taiwan.
Taipeioffice:5, Lane118,Sung-tehRoad,Taipei,110, Taiwan.
Web-http://www.mipro.com.tw
E-mail:mipro@mipro.com.tw
HANDHELD WIRELESS MICROPHONE
NOTE﹕
1. PARTS NAME AND FUNCTIONS
GROUP
CHANNEL B A T
GROUP
CHANNEL B A T
(Fig.1)
1. Grille: Protects cartridge, prevents "POP" noise and
prevents microphonefrom rolling withpolygonal shape.
2. Color Ring: For frequency differentiation.
3. Housing: Upper portion to be connectedtocapsule
module and battery. Internally, it holds transmitter PCB.
4. Functions of LCD Display
5. Battery Compartment: Designed to accommodatetwo
1.5V(AA) batteries.
6. Battery Cap: Covers battery in the battery compartment.
7. Anti-roll Ring: For frequency differentiation.
2. BATTERY INSTALLATIONS
GROUP
CHANNEL BAT
(Fig.2)
1. Unscrew battery capinacounter-clockwise direction (6).
2. Insert two1.5V(AA) batteries into thebattery
compartment according to the correct polarity as shown
in Fig.2.Themomentthebattery touches the terminals,
the indicator will flashbriefly (6).
-1-
-2-
HANDHELD WIRELESS MICROPHONE
3. FUNCTIONS OF LCD DISPLAY
HANDHELD WIRELESS MICROPHONE
4. Battery Status:
GROUP CHANNEL BAT
ERR
1. ERR Message: When "ERR" appears, it means "Error
with the system" Please refer to the following codes
to diagnose which error you are experiencing.
ERR no01→EEPROM is not being programmed or
internal data error.
ERR no02→Testing only.
ERR no03→The frequency you are about to program
into the system exceeds microphone's
upper limit. (At this time, microphone is
still operatable and the frequency remains
unchanged. To clear to "ERR" message
in LCD display, simply turns off the power
and switch back on.)
100%
80%
40%
0%
Battery Status: When the battery has less than 10%
power remaining, LED indicator will lit to remind you to
replace the battery. If undervoltage, LCD will show
"PoFF" and shut down the system to avoid battery being
over-discharged.
5. Switch Off:
When switch the power knob to "Off" position, LCD
will show "PoFF" first. Then, the system is completely
shut down and no further message will be displayed.
ERR no04→The frequency you are about to program
into the system is below microphone's
frequency lower limit. (At this time,
microphone is still operatable and the
frequency remains unchanged. To clear
to "ERR" message in LCD display, simply
turns off the power and switch back on.)
2. "Group" & "Channel " : When both items are shown,
they indicate that the user is currently using the preprogrammed frequency in the receiver.
3. "Channel" Only : If "Channel" is the only item shown in
the display, it indicates the user is using the
personalized frequency. (Such frequency can only be
programmed via MIPRO's ACT Software and available
for ACT-707B and ACT-707C only.)
-3-
10%
-4-
EQUIPMENT DESCRIPTION
SPECIFICATIONS FOR ACT-707H TRANSMITTER
1. Frequency Range
2. Frequency Generation
3. Switching bandwidth
4. Channel Grid
5. Frequency Stable
6. Modulation
7. RF Output Power (50 ohms load)
8. Spurious Emission
9. Nominal Deviation
10. Audio Frequency Range
11. Distortion
(at 1KHz and nominal DEV)
12. Preemphasis
13. Battery
14. Current Consumption
15. Operation Voltage
16. Antenna
17. Dimension In mm
18. Wight
19. Environmental
614MHz~806MHz (FCC)
Phase Locked Loop (PLL) technique
24MHz
25KHz
±0.005% 0 to +50℃
FM
<50mW
<4nW
±40KHz
80~18,000Hz
<0.3%
25uS
AA3(1.5V) ×2
Appox.80mA
1.9V~3V
Build in Antenna
49(D)×232(L) mm
Approx. 280g
Full SPECS -10 to 60 ℃
ACT707HI11A
Notice: The changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation.
IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the
antenna or the device is permitted. Any change to the antenna or the device could
result in the device exceeding the RF exposure requirements and void user’s authority
to operate this device.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2001:12:06 14:19:23Z
Modify Date                     : 2002:01:29 18:38:01-08:00
Page Count                      : 5
Creation Date                   : 2001:12:06 14:19:23Z
Author                          : candy
Producer                        : Acrobat PDFWriter 5.0Windows NT ª©
Mod Date                        : 2002:01:17 16:53:59+08:00
Metadata Date                   : 2002:01:17 16:53:59+08:00
Title                           : ACT707H說明書.cdr
Creator                         : candy

EXIF Metadata provided by EXIF.tools