Mipro Electronics Co GT24 Transmitter User Manual GT 24 2CE542A x3 201505

Download:
Mirror Download [FCC.gov]
Document ID	2596665
Application ID	g9mP6atnBbWIN6sdYXbZYg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	127.34kB (1591798 bits)
Date Submitted	2015-04-26 00:00:00
Date Available	2015-04-26 00:00:00
Creation Date	2015-04-23 02:27:41
Producing Software	Corel PDF Engine Version 3.0.0.739
Document Lastmod	0000-00-00 00:00:00
Document Title	GT-24(2CE542A)x3_201505.cdr
Document Creator	CorelDRAW
Document Author:	fay

User Guide
GT-24 Guitar Transmitter
All rights reserved. MN 015/05
Do not copy or forward without prior approvals MIPRO.
Specifications and design subject to change without notice.
2 CE 5 4 2 A
Guitar Transmitter
Contents
Transmitter Controls and Indicators
Operating Instructions
Battery Insertion
MP-80 Battery Charger (Optional)
Guitar Transmitter
Transmitter Controls and Indicators
2 3 4
Housing: Holds internal PCB.
ACT Port: Align and sync frequency
automatically with a matching receiver.
Battery Indicator Lights: Shows the battery
level or charging status.
Power: Press and hold for 1~2 seconds to
power on or off.
Antenna: 1/4λtransmitting antenna.
6.3mm (1/4”) phone jack plug: Insert this
adjustable plug into the electric guitar or electric
bass.
Battery Charging Contact: Align contacts
during charging.
(a) Metal objects contact is forbidden.
(b) It is forbidden to contact metal objects.
Guitar Transmitter
Guitar Transmitter
Operating Instructions
Battery Cover: Holds a single 18500
rechargeable battery.
Battery compartment & Battery: Inserts a
single 18500 rechargeable battery according to
correct polarity. Insert with plus (+) polarity end
of battery towards inside of the battery
compartment(see above graph). Wrong polarity
insertion will result in no connection and will not
damage the circuitry.
1. Power On & Off
a. Press & hold for 1~2 seconds.
b. Power On: battery indicator lights are lit
solidly.
c. Power Off: battery indicator lights are not lit.
2. Battery Indicator Lights
a. Recommend to charge the battery when one
single red indicator is solidly lit (25%) or
replace with a fully-charged battery.
100%
75%
50%
25%
(green indicator)(red indicator)
Guitar Transmitter
3. Ensure both the receiver and guitar transmitter
frequencies are synchronized to the same
channel and power is off on the guitar
transmitter before inserting the plug into the
electric guitar. Power on and adjust audio levels
after plug insertion.
Guitar Transmitter
4. A suction cup holder can be installed manually
for a secured fit for electric guitar/bass where
the output jack is situated in different body
area.
Guitar Transmitter
Battery Insertion
Guitar Transmitter
MP-80 Battery Charger (Optional)
1. Gently push down on the
battery compartment latch
and swing the battery
compartment door open
(do not use force when
opening or closing the
battery door).
GT-24 guitar transmitter and/or an additional 18500
recharge battery can be both recharged
simultaneously in MP-80.
GT-24
2. Install a freshly charged
18500 rechargeable battery
with plus (+) polarity end
of battery towards inside.
3. Then carefully close the
battery door until the hinge
is properly locked and
secured.
Battery Adaptor
Insert the GT-24 into
a supplied battery
adaptor first before
place into the MP-80
for charging.
18500
Rechargeable
Batteries
Insert one or two
18500 rechargeable
batteries into MP-80
according to the
correct polarity.
Caution
Remove the batteries if unused for a long period of
time to prevent battery leakage, corrosion and
causes possible damage to electronics.
Notes
1. Refer to actual product in the event of product
description discrepancy.
2. Frequency range and maximum deviation comply
with the regulations of different countries.
Guitar Transmitter
Guitar Transmitter
Federal Communication Commission Interference
Statement
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one of
the following measures:
The antennas used for this transmitter must be installed to
provide a separation distance of at least 0.5 cm from all
persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
IC
This device complies with Industry Canada RSS-210
! Reorient or relocate the receiving antenna.
! Increase the separation between the equipment and
receiver.
ISSUE 8 standards. Operation is subject to the following
two conditions:
! Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
(2) this device must accept any interference, including
! Consult the dealer or an experienced radio/TV technician
for help.
interference that may cause undesired operation of the
device.
(1) this device may not cause interference, and
FCC Caution: To assure continued compliance, any
changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate this equipment. (Example - use only
shielded interface cables when connecting to computer or
peripheral devices).
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a
minimum distance of 0.5 cm between the radiator and your
body.
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
Guitar Transmitter
Guitar Transmitter
WARNING
1.
FOR OUTDOOR USE:
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
2.
UNDER WET LOCATION:
Apparatus should not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases should be placed on the apparatus.
3.
SERVICE INSTRUCTIONS:
CAUTION - These servicing instructions are for use by
qualified service personnel only. To reduce the risk of
electric shock, do not perform any servicing other than
that contained in the operating instructions unless you
are qualified to do so.
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present
within this unit.
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
Disposal Dispose of any unusable devices or batteries
responsibly and in accordance with any
applicable regulations.
Disposing of used batteries with domestic waste
is to be avoided!
2005-08-13
Batteries / NiCad cells often contain heavy
metals such as cadmium(Cd), mercury(Hg) and
lead(Pb) that makes them unsuitable for
disposal with domestic waste. You may return
spent batteries/accumulators free of charge to
recycling centres or anywhere else batteries/
accumulators are sold.
By doing so, you contribute to the conservation
of our environment!
10
11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creation Date--Text             : 
Producer                        : Corel PDF Engine Version 3.0.0.739
Mod Date--Text                  : 
Format                          : application/pdf
Creator                         : fay
Title                           : GT-24(2CE542A)x3_201505.cdr
Creator Tool                    : CorelDRAW
Modify Date                     : 2015:04:23 17:04:38+08:00
Metadata Date                   : 2015:04:23 17:04:38+08:00
Document ID                     : uuid:708fd3be-a686-487d-bfe3-a773f7cef78f
Instance ID                     : uuid:fcacab4d-ab35-44d1-b4c1-a77ec38f87b0
Page Count                      : 7
Create Date                     : D:20150423022741
Author                          : fay

EXIF Metadata provided by EXIF.tools