Mipro Electronics Co MTG100T Transmitter User Manual Part 1of2

Mipro Electronics Co Ltd Transmitter Users Manual Part 1of2

Contents

Users Manual Part 1of2

Download: Mipro Electronics Co MTG100T Transmitter User Manual Part 1of2
Mirror Download [FCC.gov]Mipro Electronics Co MTG100T Transmitter User Manual Part 1of2
Document ID1437261
Application IDmZ2WvGR5g/YngfY6UZlssw==
Document DescriptionUsers Manual Part 1of2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize280.73kB (3509166 bits)
Date Submitted2011-03-24 00:00:00
Date Available2011-03-24 00:00:00
Creation Date2011-02-24 15:18:17
Producing SoftwareAdobe Acrobat 9.4.2 Image Conversion Plug-in
Document Lastmod2011-03-22 08:35:56
Document TitleUsers Manual Part 1of2
Document CreatorAdobe Acrobat 9.4.2

MiPRO®
User Guide
MTG-100
Digital Wireless Tour Guide System
MTG-IGOR
MiPRO MIPRO Electronics Co., Ltd.
MIPROM
Headquarters: 814 Pei-Kang Road, Chiayi, 60096, Taiwan. MW“
Web: www.mipro.com.tw
E-mail: mipro@mipro.com.tw
F@ (e ZML4LIAI|||II|||||||||
A5110225
Design and specifications are subject to change without prior notice 100°/o Made In Taiwan
| MTG-100T
IMPORTANT SAFETY INSTRUCTIONS
NP‘P’PPN!‘
10.
11.
12.
13.
14.
15.
16.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use the apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus(including amplifiers)
that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding— type plug has two
blades and a third grounding prong. The wide blade or the
third prong is provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/ accessories specified by the
manufacturer.
Use only with a cart, stand, tripod, bracket or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
Injury from tip—over.
A¢4
~*
Unplug this apparatus during lighting storms or when
unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
When the mains plug or appliance coupler used as the
disconnect device, it shall remain readily operable.
Please keep the unit in a good ventilation environment.
WARNING
To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture. The apparatus shall
not be exposed to dripping or splashing and that no
objects filled with liquids, such as vases, shall be placed
on the apparatus.
CAUTlON
iusx on lucnuc snocx
CAUTION: To reduce the risk of electric shock, do not
remove any cover. No user-serviceable parts inside. Refer
servicing to qualified service personnel only.
Q The lightning flash with arrowhead symbol within
the equilateral triangle is intended to alert the use
to the presence of un-insulated "dangerous
voltage“ within the product's enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock.
1 The exclamation point within the equilateral
triangle is intended to alert the user to the
presence of important operation and maintenance
(servicing) instructions in the literature
accompanying this appliance.
CAUTION
To prevent electric shock, do not use this polarized plug
with an extension cord, receptacle or other outlet unless
the blades can be fully inserted to prevent blade
exposure.
12
13
14
15
21
Product Overview
Key Features
MTG-100R
Receiver Controls and Indicators
MTG-IOOT
Receiver Controls and Indicators
LCD Screen
Setting Up Receiver
Setting Up Transmitter
Wearing Neck Lanyards
Transmitter Audio Input
Optional Microphones for MTG-100T
Transmitter
MTG-100C-12
12-Slot Storage and Charger Carry Case
MTG-100C-28
28-Slot Storage and Charger Carry Case
Product Overview
MTG-100 is an innovative digital wireless tour guide
system. It is ultra compact, lightweight and easy to
use. Digital design provides crystal-clear audio
quality, secured and reliable transmission and
insensitive to interference attributes that are
unmatched by the deficiency of simple analog
design systems.
This system comprises of durable MTG—IOOR
portable receiver, MTG-100T portable transmitter
and MTG-100C-12 or MTG-100C-28 storage and
charger carry case. It operates in the license-free
865 & 928 MHz ISM band. Each band is preset with
16 switchable frequencies and 4 compatible systems
are available ensuring several different tours or
groups can be operated at the same venue without
interfering with each other.
ISM band requires no user licensing; thus, no
worries about changing groups and channels when
operating in multiple countries.
Built-in lithium polymer rechargeable battery is
used instead of regular battery to resolve the
troubles of changing battery and save you a
significant amount of money years to come.
User-friendly 12 and 28 slots storage and charger
carry cases are available for small to large, indoor
or outdoor applications for guides, interpreters or
presenters to communicate effectively to a group of
people, rejecting irritating surrounding noise. MTG-
100 is the best choice for functional features and
high performance wireless tour guide system.
Key Features
Operates on user license-free ISM bands: EU
863~865MH2 and USA 926~928MHz.
Industry's only true diversity design prevents signals
dropouts and ensures maximum reception quality.
Long distance and stable receiving range.
Interference-free from Bluetooth, Wi-Fi and 2.4GHz
wireless transmission.
Encrypted digital technology enables secure audio
transmission, preventing unauthorized listening.
Proprietary 16-bit audio compression technology ensures
crystal—clear sound quality.
Miniaturized, lightweight receiver can be worn
comfortably around the neck with a lanyard or fit inside
any pocket.
Easy to use, durable, reliable Quality and affordable price.
Both receiver and transmitter have built-in long-lasting
and fast-charge lithium polymer rechargeable battery.
Innovative automatic shut-off timer reduces battery
consumption.
LCD displays battery level and other parameters.
Channel lock-to avoids accidental changes.(PC Control
Interface)
Convenient 12 or 28-slot storage and charger carry case
for easy charging, storage and manage inventory.
Ethernet interface (MTG-100C-28) allows system setting
and management.
Weight: MTG-100R: 65 g / 2.3 oz (battery included).
MTG-100T: 67 g / 2.4 oz (battery included).
Dimensions(WxHxD): 45 x 84 x 21mm/1.8 x 3.3 x 0.8“.
MTG-100R
Receiver Controls and Indicators
0 Volume Control: 1-20 levels volume
adjustment.
0 Power button: Press and hold for 2 seconds to
power on & off.
9 3.5mm Jack: Insert earphones or headphones
here.
0 Lanyards & Buckle: Detachable neck lanyards.
6 Housing: Holds internal circuitry and build—in
rechargeable battery.
0 LCD Display: Display channel, receiving signals
and battery status.
0 Channel Buttons: 16 factory preset channels.E]
one channel down; E] one channel up.
0 ACT Sync (synchronization) Port: Automatic
channel synchronization. (to sync, insert into the
charging cell and align charging contact points)
0 Charging Contacts: Rechargeable battery
contact points.
MTG-IOOT LCD Screen
Transmitter Controls and Indicators Displays current settings and indicators
20 V...||I [DID] 23
2 CH 12
2 -:1
® Received/Transmitted RF Signals
@ Current Function Display
Q) Received/Transmitted Audio Signals
® Battery Level Indicator (battery icon will flash
when battery level is low)
Setting Up Receiver
Press [3] or [El channel button for a factory pre-set
channel. Channels CH 01 ~ 16 will be displayed
® Antenna: Transmlttlng antenna. accordingly.
Gr Power button: Press and hold for 2 seconds to
power on & off.
® 3.5mm Audio Input: Accepts Microphone-input
or Line—input.
$1 Lanyards & Buckle: Detachable neck lanyards.
@ Housing: Holds internal circuitry and build-in Zfi
rechargeable battery. 4m...
G1 LCD Display: Display channel, receiving signals
and battery status.
Q MODE button: To select functions.
Q SET button: To set and change parameter V...||I Emmi V...u| m V...||I [1mm
valueS- CH 07 E] CH 08 E] CH 09
Q“ ACT Sync (synchronization) Port: Automatic 56-1: 5-21 B-Z‘
channel synchronization. (to sync, insert into the
charging cell and align charging contact points)
® Charging Contacts: Rechargeable battery
contact points.
Volume Control
Insert the earphones or headphones and slowly
turn up the volume to a comfortable, safe sound
level.
"Mute" is lowest volume level. "VOL 20" is
highest volume level.
Warning
Avoiding Hearing Damage - Permanent
hearing loss may occur if earphones or
headphones are used at high volume. Set the
volume to a safe level.
Wall“
M ute "No Sound"
5-1:
Vull“
VOL 9
E-Zl
"Lower Volume $ " @
Vullll
VOL 20
B-I:
"Increase Volume f “@)
Setting Up Transmitter
Press "MODE" button for one of the five functions.
6 G) G (D 6
CH 05 —> 868.500 —>|Gain Ode—JlnPut LinI—> RF Mid
I_CI I_I I_| ; I_I l
6 Channel
13 Frequency
G Sensitivity Level
6) Audio Input Source
6 RF Output Power
v...- m
868.1253: ‘
Channel Set-Up
o Press MODE button until CH mode appears.
. Press SET button once to activate function. CH
00 blinks once when activated.
. Press SET button increases the channel number
by one.
o Press MODE button to confirm and save the
change.
v....n [mun E] v...“ [mm
CH 01 _, CH 16
3:1 5:
<—
Frequency Audio Input Source Set-Up
o The displayed frequency corresponds to the o Press MODE button until InPut mode appears.
selected channel number. Frequency cannot be . Press SET button once to activate function. InPut
changed. Mic or Lin blinks once when activated.
VJ“, [mm . Press SET button for either Mic (Microphone) or
868.125h‘z Lin (Line).
5: o Press MODE button to confirm and save the
change.
Sensitivity Level Set-Up Note:
. Gain Levels: Microphone Input (-12db ~9db) * Mic-level provides biased power for electret
Line Input (-12db~3db). condenser microphone.
o Press MODE button until Gain mode appears. * Line-level provides audio transmission Of
0 Press SET button once to activate function. Gain MP3/CD/DVD player.
0 dB blinks once when activated.
. Press SET button for -12, -9, -6, -3, 0, or 3 dB. Tfi'igut [E] Eli-{gut
o Press MODE button to confirm and save the 3-1: 4.— 5-1:
change.
Note:
* Approximately 70% of the level indicator is
optimal and recommended.
v-lllll
Gain- 9db
5—D
RF Output Power Set-Up
Press MODE button until RF mode appears.
Press SET button once to activate function. RF
Hi, Low or Mid blinks once when activated.
Press SET button for Hi, Low or Mid power.
Press MODE button to confirm and save the
change.
Notes:
Low or Mid setting is recommended for indoor,
smaller environment.
Hi setting has 10mW RF power output.
Vul'll V-lll V“
E-Zl —> 5-1: —> 3-1:
| [El l
10
Battery Level Status
IIEQQDD
100°lo 80°/o 60°/o 40°/o 20°/o 10°/o blinks
Charge the battery when zero or one level
indicator (10%) remains or when the battery icon is
flashing indicating a lower battery level. Power will
shut-off automatically if continuous use without
charging to protect battery from being overly
discharged.
Note:
* MTG-100R/T has a built-in, non-user-replaceable
rechargeable battery. Please contact local
authorized MIPRO distributor or dealer service
provider for servicing.
Battery and Power
. Built-in rechargeable lithium-polymer battery.
. Up to 14 hours of operation when fully charged.
. Fast-charge time: about 2.5 hours. (charges
up to 80% of battery capacity)
0 Full-charge time: about 4.5 hours.
Note:
* Rechargeable batteries have a limited number of
charge cycles and may eventually need to be
replaced. Battery life and number of charge
cycles vary by use and settings.
11
Wearing Neck Lanyards Transmitter Audio Input
Insert into both side
MU-101: Headworn Microphone.
release buckles and adjust the
0 .m
m 4. w,
n M Mm
m M d
)r r
“we 0
61 d.
MhO me
on. ta
“imam “SC
.I . ee
Mal c abg
53 .I mnm
macaw M taO
.I t SCt
Gd 5
”at U S
esw m “em
wue .I. nnn
prh d Mhm
t n pn
._| n a pre
nne raV
.l6 .E 36
MctaeD E m
icqmmo rOC
Nd&hM mam
_g.flOC Ghi
gere C V
MUSE”U 8mm
MHIPMmS RED. B
straps for ideal length.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
Modify Date                     : 2011:03:22 08:35:56+08:00
Create Date                     : 2011:02:24 15:18:17+08:00
Metadata Date                   : 2011:03:22 08:35:56+08:00
Creator Tool                    : Adobe Acrobat 9.4.2
Format                          : application/pdf
Document ID                     : uuid:91efe1a4-5efc-4b31-94a6-b11d205de97f
Instance ID                     : uuid:60c227e0-20a0-4fba-9a69-9f652e259421
Producer                        : Adobe Acrobat 9.4.2 Image Conversion Plug-in
Has XFA                         : No
Page Count                      : 9
Creator                         : Adobe Acrobat 9.4.2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: M5X-MTG100T

Navigation menu