Mitac Digital Technology 2007VEN3001 Bluetooth GPS Receiver with Camera User Manual 631361 01A

Download:
Mirror Download [FCC.gov]
Document ID	757717
Application ID	XKdFr+M5oUWaBYkL4SUhtA==
Document Description	Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	297.49kB (3718579 bits)
Date Submitted	2007-02-12 00:00:00
Date Available	2007-02-12 00:00:00
Creation Date	2007-02-07 14:35:45
Producing Software	Acrobat Distiller 8.0.0 (Windows)
Document Lastmod	2007-02-07 14:35:45
Document Title	Microsoft Word - 631361-01A.htm
Document Creator	PScript5.dll Version 5.2
Document Author:	Marco

The Detection Angle is set to alert you when you are
within so many degrees of the POI.
Select Detection
Angle.
Use the numeric
number of degrees
alert. When you
OK.
keypad to enter the
in which to set the
have finished, select
Chapter 8:
Navigation
Options
The First Warning
is set to alert you when you are within a certain
number of feet
from the POI.
Select First
Warning.
Use the numeric
number of feet in
When you have
keypad to enter the
which to alert you.
finished, select OK.
Chapter 8:
Navigation
Options
The Last Warning
is set as a final alert when you are within a certain
number of feet
from the POI.
Select Last
Warning.
Use the numeric
number of feet in
When you have
When you have
keypad to enter the
which to alert you.
finished, select OK.
set the parameters as
you like, select Save.
Chapter 8: Navigation Options
8.1.3 Map Options
Map Options enable you to determine the behavior of
the Map while you are driving.
Select Map Options.
With Scrolling enabled, the vehicle position icon will
always remain in the same position with the map
scrolling, or moving as while the vehicle is in motion.
With Scrolling disabled, the vehicle position icon will
move forward slightly; then, the map will scroll down.
Having Scrolling disabled allows for a faster display.
Heading Up sets the map display so that the direction
of travel is always at the top of the screen. North Up
sets the map display so that North is always at the top
of the screen. North Up is only available in 2D Map
mode.
Select Miles or Kilometers as the unit of measure for distance.
When you have finished, select Save.
8.1.4 TrueView Options
TrueView options enable you to control how and when the TrueView screen
is displayed. Select
TrueView Options.
Select Split TrueView to enable the TrueView/Map Screen mode. See
“TrueView Screen” on
page 19.
Select Disable TrueView if you do not want the TrueView screen to appear
during routing.
Select Manual TrueView to show the TrueView screen only by pressing the
View key.
Select Auto TrueView to have the TrueView screen appear automatically
when the next maneuver is approaching.
When you have finished, select Save.
8.1.5 Select Map Color
Select Select Map Color.
With Automatic Night Mode enabled, the Magellan Maestro
4000/4040/4050 will switch between a Day screen and a Night screen
based on sunrise and sunset times for your current location.
Select Day Screen to choose a color scheme for the map while you are
driving during the
day.
Select Night Screen to select a color scheme for driving at night.
When you have finished, select Save.
Chapter 8: Navigation Options
Select from nine available color schemes:
When you have finished, select Save and you will be returned to the Select
Map Color menu.
8.1.6 Route Preferences
Route Preferences enable you to set parameters for the
Magellan Maestro 4000/4040/4050 to follow when
calculating a route. Select Route Preferences.
Automatic Re-Route will cause the Magellan Maestro 4000/4040/4050 to
try up to three times to automatically re-route to the destination when it has
detected that the vehicle has deterred from the calculated route.
When you have finished, select Save.
Chapter 8: Navigation Options
8.1.7 Detour Options
The Magellan Maestro 4000/4040/4050 comes equipped with SmartDetour.
If you are driving on the freeway with SmartDetour enabled and your speed
drops below 15 MPH, you may press the detour icon on the Map screen in
order for the Magellan Maestro 4000/4040/4050 to calculate an alternate
route around traffic.
Select Detour Options.
Select the distance of the detour. You can select from a preset distance of
three miles, five miles, or 10 miles.
You can also select a custom distance. Select Custom, and then select the
button to the right to enter a custom distance.
Enter the number of miles and select OK.
Next, select the amount of time the Magellan Maestro 4000/4040/4050 will
wait before alerting you. Select the Time button.
Enter the number of minutes and select OK.
Enable Automatic Detour is selected by default as shown by the checkbox
mark. To disable automatic detour, deselect Enable Automatic Detour..
When you have finished, select Save.
Chapter 8: Navigation Options
When you encounter traffic, and the set time has
elapsed, the Detour icon will flash on the Map
screen. Touch the icon on the screen to have the
Magellan Maestro 4000/4040/4050 calculate the
detour. You can choose to ignore the Detour alert; and
after one minute it will stop flashing until the set time
has elapsed again when it will alert you
once more.
8.1.8 Menu Colors
You can change the color of the menu
screens by selecting one of four color schemes.
Select Menu Colors.
Select the desired color scheme.
When you have finished, select Save.
8.1.9 Tone Options
As you approach a maneuver, an audible alert sounds
to let you know to make the maneuver.
Select Tone Options.
Select either Bell, Chime, or Beep.
When you have finished, select
Save.
8.1.10 GPS Options
GPS Options provide you with
information on the satellite
signal as well as the ability to
acquisition time.
speed up signal
8.1.10.1 GPS Status
The GPS Status screen is available by pressing the GPS Signal icon on the
Map screen (see “Map Screen” on page 17) as well as through the GPS
Options menu. GPS Status monitors the satellite signal. For more
information on the GPS Status screens refer to “GPS Status Screen” on page
120.
Chapter 8: Navigation Options
8.1.10.2 Set GPS Position
Set GPS Position enables you to manually set the
location of the Current Position icon. If you have
travelled a long distance with the Magellan Maestro 4000/4040/4050 off, it
may take some time for the Magellan Maestro 4000/4040/4050 to reacquire
a satellite signal. By manually setting the position of the Magellan Maestro
4000/4040/4050, you are telling the Magellan Maestro 4000/4040/4050
where you are and will speed up the satellite signal acquisition. Make sure
you first select the country you are in by pressing the Globe button on the
Destination screen (see “Country Selection (Globe Button)” on page 25).
Select Set GPS Position.
Enter the first few characters of the city name (see “Inputting Text
Characters” on page 13). Select OK. Use the Navigation key to scroll the
list up or down (if necessary) and select the desired city.
Enter the street name (see “Help with Address Entry” on page 15). Select
OK. Use the
Navigation key to scroll the list up or down (if necessary) and select the
desired street.
Enter the street address. The acceptable range of numbers is displayed at the
top of the screen. If you do not know the exact address, just select Done and
the Magellan Maestro 4000/4040/4050 will use the lowest number in the
range. Select Done to continue. You will be returned to the Configuration
menu.
Go to the Map screen. Your current position is now set
to the address you entered.
8.1.11 Simulator Mode
In Simulator Mode, you can demonstrate the
capabilities of the Magellan Maestro 4000/4040/4050
without actually driving. In order for the simulation to
work, you must set a route first. Select Simulator
Mode.
Select Simulate to begin the simulation.
Set the speed variance of the simulation: x1 will
“drive” at normal speed using known speed limits;
x1.5 will “drive” at one and a half times normal speed; x2 will “drive” at
two times normal speed.
Return to the Map screen to view the simulation.
To disable Simulator Mode, select Stop, or when the
power is turned off the Simulator will stop.
Chapter 8: Navigation Options
8.1.12 Automatic Volume
The Magellan Maestro 4000/4040/4050 can be set to automatically increase
the volume when the vehicle exceeds 45 MPH in order
to compensate for road noise.
Select Automatic Volume.
Select the number increment by which to increase the volume.
Select Enable.
When you have finished, select Save.
8.1.13 Backup and Restore
The Magellan Maestro 4000/4040/4050 has the
capability to back up your information (Address Book,
Previous Destinations, etc.) to an optional memory
card.
8.1.13.1 Backup
Select Backup and Restore then, select Backup.
If you do not have a card inserted, you will be prompted to insert a card.
Make sure the card is unlocked to allow data to be copied to it. Insert a card
and reselect Backup.
A dialog box will appear asking you to confirm your selection. Select Yes.
The files are copied to the memory card.
8.1.13.2 Restore
To restore the files to the hard disk, select Backup and Restore then, select
Restore.
If you do not have a card inserted, you will be prompted to insert a card.
Insert a card and reselect Restore.
A dialog box will appear asking you to confirm your selection. Select Yes.
The files are copied to the hard disk.
Chapter 8: Navigation Options
8.1.14 Map Information
Product Information displays information about the map and database
installed in your Magellan Maestro 4000/4040/4050. This information aids
our Technical Support Representative in finding a solution to whatever
problem you may have.
8.2 Trip Computer
The Trip Computer is a valuable tool for recording the
mileage and time spent driving while on business or
vacation. The information for the trip can be saved
and viewed at any time, providing you easy access to
information on your current trip, as well as previous
trips.
To access these features, press the MENU key on the Magellan Maestro
4000/4040/4050 and select Navigation Options.
Select Trip Computer.
8.2.1 Current Trip
When you begin a new trip and you need to record the
information, access the Trip Computer. There you can
save the
information displayed for the current trip (if needed)
and reset the Trip Computer to zero in preparation for
your new trip.
Select Trip Computer
Select Current from the list of saved Trip Reports.
Chapter 8: Navigation Options
The Trip Computer is always in a “Running” state.
The information for the current
trip is displayed.
8.2.1.1 Stopping or Starting
the Trip Computer
At any time the Trip Computer can be stopped and started. If the Trip
Computer is currently running, select Stop. The Trip Computer will stop
recording until restarted or reset.
While the Trip Computer is in a “Stopped” state, select Start to continue
recording the current trip or select reset to begin a new trip.
8.2.1.2 Saving the Current Trip Report
When you have finished with your trip, you can save the information for
later viewing. Select Save at any time.
Use the keypad to enter a name for the Trip Report and select OK when you
are finished.
Chapter 8: Navigation
Options
8.2.1.3
Resetting the Trip Computer
Before
you need
Reset and
Trip
remain in a
starting a new trip that you want to record,
to reset the Trip Computer first. Select
the information will be set to zero. The
Computer will
“Running” state.
8.2.1.4
Trip
Viewing a Saved
Report
From the
screen,
Trip Computer
select the Trip Report you wish to view.
The saved
ESCAPE
and return
screen.
Trip Report is displayed. Press the
key when you are finished to view the trip
to the Trip Computer
8.2.1.5
Report
Select the
deleted.
Select Delete.
Deleting a Trip
Trip Report to be
Chapter 8: Navigation Options
The trip is deleted and you are returned to the Trip
Computer screen.
Chapter 9: Bluetooth
9.1 How to use the Dialer
9.1.1 Introduction
The Dialer program is a main part of Magellan
Maestro 4000/4040/4050 that allows you to use it as a
Hands-free device for a Bluetooth wireless-technology enabled mobile
phone. You can tap your Magellan Maestro 4000/4040/4050 to place and
receive calls instead of pressing the phone’s keypads. It’s a solution of
wireless connection between the Magellan Maestro 4000/4040/4050 and the
Bluetooth wireless-technology enabled mobile phone.
9.1.2 Main Interface
The main interface of BlueSoleil™ is as below:
9.1.3 Pair Mode
For the first time of use, no mobile phone paired or connected. The system
will automatically switch “Pair Mode” to waiting for pairing action from
your mobile phone.
9.1.3.1 The pairing window shall pop up, if it is not the first time of use,
you need to click
in the main interface.
Notes: The paring mode can be canceled
by clicking
in the paring window. Pairing will be
failed if the process cannot
be finished within 1 minute.
Chapter 9: Bluetooth
9.1.3.2 Make paring process on your mobile phone. (See the user guide of
your mobile phone.)
Figure 3~3
9.1.3.3 After you input the
passkey in your mobile phone,
there shall be a passkey input
window pop up in your
Magellan Maestro. Then you
need to input the same numbers
as you input to your mobile
phone to this pop up window.
9.1.4 Establish Connection
There are two ways to establish connection with the Bluetooth wireless
technology enabled mobile phone.
9.1.4.1 Connect
Tap
in the main interface to search and connect your paired mobile phone.
Figure 3~4
Chapter 9: Bluetooth
Note:
• The device searching mode can be canceled by clicking
in the connecting window.
• If your mobile phone doesn’t support “Hands-free” service and just
support the “Headset” service, you needn’t connect. If you dial a number out
from your mobile phone or incoming call the “Headset” service shall be
connected automatically. The
main interface shall show up with a status message "xx connected, partial
function supported only", and the button
and
shall be turned to grey as
9.1.4.2 The other way to connect
You can run the BlueSoleil™ program by tapping “Bluetooth” icon in the
main interface.
Figure 3~5
Click
button to enter the “Bluetooth Manager” Window.
Chapter 9: Bluetooth
Click
to explore the Bluetooth wireless technology enabled mobile phone.
Figure 3~7
Select a mobile phone, click
to see the services that the mobile phone provided.
Chapter 9: Bluetooth
Figure 3~8
Select Hands-free Service, and Click
to make connection with the hands-free mobile phone. Then there shall be a
passkey input window pop up in your mobile phone if you haven’t paired
your mobile phone with the Magellan Maestro before. You need input not
more than 16 digital numbers you want to use as passkey to pair with the
Magellan Maestro.
Figure 3~9
After you input the passkey in your mobile phone, there shall be a passkey
input window pop up in your Magellan Maestro. You need to input the same
numbers you have inputted in your mobile phone.
Chapter 9: Bluetooth
Figure 3~10
Tap the
icon to back to the main
interface once the connection
has been established.
Figure 3~11
Note: If your mobile phone
doesn’t support “Hands-free”
service and just support the
“Headset” service, you just
need choose your mobile phone
in the device list (Figure 3~7),
tap
(Figure 3~7) to pair with your
mobile phone, and no need to connect. If you dial a number out from your
mobile phone or an incoming call the “Headset” service shall be connected
automatically. The main interface shall show up with a status message "xx
connected, partial function supported only", and the button
and
shall be turned to grey as
9.1.5 Place a call
You can make calls out after “Hands-free” connected successfully.
Chapter 9: Bluetooth
Four ways are available:
Place a call via Keypads
Place a call via Contacts
Place a call via Call History
Place a call via Redial.
9.1.5.1 Place a call via Keypads
For place a call via keypads, you need to tap
in the main interface (Figure 3~11). Then the keypads window shall pop
up as below.
Figure 3~12
• You can input 13 characters: “0~9”, “ Ͽ ” and “#” with the buttons in the
keypads. Input “+” by tapping the “ Ͽ ” for about 1 second.
• You can tap to delete the phone number you have inputted. Tap the button
for about 1 half seconds the entire row shall be deleted.
• Once you have inputted the phone number you want to dial out, you need
to tap to dial out the call.
9.1.5.2 Place a call via Contacts
If you have stored your contacts’ information in the “Contacts” (Figure
2~1), you can place the call via “Contacts”.
There are two ways to use the “Contacts” to place a call:
• Tap in the main interface (Figure 3~11).
• Tap in the “Keypads” window (Figure 3~12).
Chapter 9: Bluetooth
Figure 3~13
Use the “Alphabetical index” to find a contact.
Tap
and
to move up and down to find a contact.
• Choose a contact and tap
to call the contact.
Tap a contact, the detail phone information shall pop up as below:
Figure 3~14
• Choose the “Call Mobile”, “Call Work” or the “Call Home”, tap
to back to the forward window (Figure 3~13), and then you can choose a
contact and tap
to call the contact.
9.1.5.3 Place a call via Call History
The “Call History” window displays the list of calls you have dialed out
before, and is divided into 3 pages: Incoming / Outgoing / Missed. It will
store the latest 20 calls of incoming call/Outgoing call/Missed call numbers.
(Total: 60)
Chapter 9: Bluetooth
There are two ways to use the “Call History” to place a call:
Tap
in the main interface (Figure 3~11).
Tap
in the “Keypads” window (Figure 3~12).
Figure 3~15
Tap
to check the history of incoming calls.
Tap
to check the history of outgoing calls.
Tap
to check the history of missed calls.
The records are stored as this format:  or 
 , 

• • Tap
and
to move up and move down to find a record.
Tap
to delete a record selected.
Tap
to delete all records in the page.
Tap
to save a caller’s information to “Contacts”.
Tap
to call back.
9.1.5.4 Place a call via Redial
You can redial the last phone number you have called or received by tapping
in the main interface (Figure 3~11).
Chapter 9: Bluetooth
Note: If there is no any call history, the button will be shown as
in the main interface (Figure 3~11).
After tap
the dialing window shall pop up as below:
Figure 3~16
Tap
to cancel the dialing.
Tap
to mute the waiting ring before
the call was received.
• After tapping the mute button, it will show as
, tap it to cancel mute.
Tap
and
to turn up and down the volume of waiting ring before the call was received.
• Tap
to set the window as minimum as an icon before other windows.
9.1.5.5 Dial Fail
If dial failed due to network trouble or other unknown reasons, the “Dialing
Failed” window shall pop up as below:
Chapter 9: Bluetooth
Figure 3~17
Tap
to redial.
Tap
to cancel dial.
9.1.5.6 Dial Success
If dial success, the “Connected” window shall pop up as below:
Figure 3~18
Tap
to pop up keypads to input the extension after connected.
Tap
to transfer the call to your mobile phone.
Tap
to transfer the call back to your Magellan Maestro after you have transferred
the call to your mobile phone.
Note: Some mobile phones don’t support cycled transfer, so in this
condition, you need to transfer the call back to your Magellan Maestro from
your mobile phone if you have transferred the call to your mobile phone
before.
Chapter 9: Bluetooth
Tap
to mute the microphone in your Magellan Maestro.
• After tapping the mute button, it will show as
, tap it to cancel mute.
Tap
and
to turn up and turn down the volume of the call.
Tap
to hang up the call.
Tap
to set the window as minimum as an icon before other windows.
Note: If the mobile phone that has paired with the Magellan Maestro does
not support the Hands-free service and only support the Headset service,
when you make a call out from that mobile phone the connected window
shall be displayed as below:
Figure 3~18(2)
Tap
to mute the microphone in your Magellan Maestro.
• After tapping the mute button, it will show as
, tap it to cancel mute.
Tap
and
to turn up and turn down the volume of the call.
Tap
to hang up the call.
Tap
to set the window as minimum as an icon before other windows.
9.1.6 Incoming call
When there is an incoming call, the “Incoming Call” window shall pop up
as below:
Chapter 9: Bluetooth
Figure 3~19
Tap
to pick up the incoming call.
Tap
to mute the incoming call ring.
• After tapping the mute button, it will show as
, tap it to cancel mute.
Tap
to reject the incoming call.
Tap
and
to turn up and turn down the volume of incoming call ring.
• Tap
to set the window as minimum as an icon before other windows.
Note: If the mobile phone that has paired with the Magellan Maestro does
not support the Hands-free service and only support the Headset service, the
“Incoming Call” window shall be displayed different from the figure 3~19.
It shall be displayed as below:
Figure 3~19(2)
• Tap
to pick up the incoming call.
Chapter 9: Bluetooth
Tap
to mute the incoming call ring.
• After tapping the mute button, it will show as
, tap it to cancel mute.
Tap
and
to turn up and turn down the volume of incoming call ring.
• Tap
to set the window as minimum as an icon before other windows. After
tapping
, the “Connected” window shall pop up as below:
Figure 3~20
Tap
to transfer the call to your mobile phone.
Tap
to transfer the call back to your Magellan Maestro after you have transferred
the call to your mobile phone.
Note: Some mobile phones don’t support to cycled transfer, in this condition,
you need to transfer the call back to your Magellan Maestro from your
mobile phone if you have transferred the call to your mobile phone before.
Tap
to mute the microphone in your Magellan Maestro.
• After tapping the mute button, it will show as
, tap it to cancel mute.
Tap
and
to turn up and turn down the volume of the call.
Tap
to hang up the call.
Tap
to set the window as minimum as an icon before other windows.
9.1.7 Exit
You can tap
in the main interface (Figure 3~11) to exit Dialer of BlueSoleil™. Actually
it is still running in background.
Chapter 9: Bluetooth
9.2 How to Transfer files via Bluetooth wireless technology
You can transfer files between your Magellan Maestro and the remote
device via Bluetooth wireless technology. Such as downloading files from
the remote device with Bluetooth wireless technology and uploading files to
that device.
Figure 4~1
9.2.1 Tap
to enter “Bluetooth Manager” window.
Figure 4~2
Chapter 9: Bluetooth
9.2.2 There are two ways (4.2.1 and 4.2.2) to connect to the “Bluetooth
File Transfer” service of a remote device:
Select a device in the device list and tap
to browse the service that the device provides (Figure 4~2).
Figure 4~3
Tap the “Bluetooth File Transfer” to connect to the remote device, and then
the “Passkey Request” window shall pop up as below:
Figure 4~4
9.2.2.1 Tap
in the “Bluetooth Manager” window (Figure 4~2), the “Passkey Request”
window shall pop up as Figure 4~4.
Chapter 9: Bluetooth
Note: If other device with Bluetooth wireless technology connects to the
FTP service of your Magellan Maestro, an Authorization Requested window
shall pop up as below:
Figure 4~5
Tap
to accept the connecting request.
Once you have checked the checkbox before “Always allow this device to
access this service”, this device should be able to connect to your Magellan
Maestro without authorization in the next time.
Tap
to reject the connecting request.
9.2.3 Input the passkey you set that is not more than 16 digital numbers,
and then the “Remote Device” window shall pop up as below:
Figure 4~6
Chapter 9: Bluetooth
Tap
to view the share folders and share files in your Magellan Maestro. (Figure
4~7)
Choose a folder or a file, and tap
to download it to your Magellan Maestro. (Figure 4~8)
Tap
to add a new folder to the remote device.
Tap
to open a folder, and tap
to go back after you have tapped
• Tap
to exit the file transfer.
Figure 4~7
Tap
to view the share folders and
share files in the remote device.
(Figure 4~5)
Choose a folder or a file, and
tap
to upload it to the remote device. (Figure 4~9)
x
Tap
to add a new folder to your Magellan Maestro.
Tap
to open a folder, and tap
to back after you have tapped
• Tap
to exit the file transfer.
Chapter 9: Bluetooth
Figure 4~8
Figure 4~9
Note: You can tap
to cancel the file transferring.
9.3 How to use My Shortcuts
The connection you have connected to shall be stored in “My Shortcuts”,
you can delete the shortcut and can reconnect the device you have connected
to by tapping the shortcut.
Chapter 9: Bluetooth
Figure 5~1
9.3.1 Tap
in the main interface (Figure
5~1) to enter “Bluetooth
Manager” window.
Figure 5~2
9.3.2 Tap “My Shortcuts” to
explore the shortcut stored in
“My Shortcuts”.
Chapter 9: Bluetooth
Figure 5~3
Note: If the connection is active, the color of the shortcut shall be green.
Choose the shortcut and tap
to disconnect the
connection.
Figure 5~4
Chapter 9: Bluetooth
Figure 5~5
Tap
to connect again.
Tap
to delete the shortcut.
Tap
to set the connection as the default connection.
Tap
to exit “My Shortcuts” window.
9.4 How to use Active Connections
The “Active Connections” shows the incoming connection. You can find the
active connection in that window and disconnect the connection.
Figure 6~1
Chapter 9: Bluetooth
9.4.1 Tap
in the main interface (Figure 6~1) to enter “Bluetooth Manager”
window.
Figure 6~2
9.4.2 Tap
in the main interface (Figure
6~1) to enter “Active
Connections” window.
Figure 6~3
9.4.2.1 Choose a active
connection, the
shall display (Figure 6~4), and
then you can tap this button to
disconnect the active
connection.
Chapter 9: Bluetooth
Figure 6~4
9.5 How to use Bluetooth Settings
Figure 7~1
9.5.1 Tap
in the main interface (Figure
7~1) to enter “Bluetooth
Manager” window.
Chapter 9: Bluetooth
Figure 7~2
9.5.2 Tap
to enter “Bluetooth Settings” window as below:
Figure 7~3
Select the white box before “Other devices can discover me” so that
other device can discover your Magellan Maestro.
Select the white box before “Allow other devices to connect” so that
other devices can connect to your Magellan Road-Mate.
9.5.3 Tap the name area, the “Device Name” change window shall pop
up as below:
Chapter 9: Bluetooth
Figure 7~4
9.5.4 Input the new device name you want to change to, and tap
to verify or tap
to cancel.
9.5.5 Tap
in the “Bluetooth Settings” (Figure 7~3) to set the share folder you want
to use in Bluetooth file transfer.
Figure 7~5
9.5.6 The default share folder is “My Flash Disk”. If you have inserted a
memory card to your Magellan Maestro, there shall be a “Storage
Card” directory in the directory list. Select the folder you want to
Chapter 9: Bluetooth
use in the Bluetooth file transfer, and tap the “Select” button to set the
share folder or tap the “Cancel” button to cancel the share folder
change.
9.5.7 After setting the share folder, it shall back to “Bluetooth Setting”
window (Figure 7~3), tap to save your settings and go back to
“Bluetooth Manager” window (Figure 7~2).
9.6 How to Exit
If you want to power off Bluetooth, what you need to do is like these steps
as shown below:
Figure 8~1
9.6.1 Tap
to power off the Bluetooth and go back the main interface.
Note: If your Magellan Maestro is connected to other devices via Bluetooth
wireless technology or other device connected to your Magellan Maestro
via Bluetooth wireless technology, you need to disconnect the connection
first; otherwise you could not power off the Bluetooth.
Chapter 9: Bluetooth
Figure 8~2
9.6.2 Tap
to exit the main interface and
go back to the “Settings”
window.
Figure 8~3
Chapter 10: System
Settings
The System Settings Menu
contains system wide
customization features which
include: Brightness, Power Management, Password, and Language.
To access these features, press the MENU key on the Magellan Maestro
4000/4040/4050 and select System Settings.
10.1 Brightness
To change how light the screen appears, select
Brightness.
Use the right arrow to make the screen appear lighter,
and use the left arrow make the screen appear darker.
With On-battery dimming enabled, the screen will decrease in brightness by
20% to save some battery power.
When you have finished, select OK to confirm or
select ESC to cancel changes.
10.2 Power Management
The Power Management features enable you to
customize the features that will conserve
battery power and display life. Select Power
Management.
Select the time period to put the Magellan Maestro 4000/4040/4050 in
“sleep” mode.
Select to enable or disable turning the screen off when music is being played.
When you have finished, select OK to confirm or select ESC to cancel
changes.
10.3 Password
10.3.1 Set Password
You can protect the Magellan Maestro 4000/4040/4050 form unwanted use
by enabling a password. Select Password.
Select Set Password to enter a password. Use the keypad to enter the
desired password. When you have finished, select OK.
Re-enter the password to confirm. Use the keypad to re-enter the password
exactly as you entered it the first time. When you have finished, select OK.
Select OK to activate the password. To return to the System Settings menu
without setting the password, select ESC.
Once the password is enabled, you will be required to enter it when the
Magellan Maestro 4000/4040/4050 is turned on or when it wakes up from
“sleep” mode.
Chapter 10: System Settings
10.3.2 Change Password
Select Change Password. Use the keypad to enter the desired password.
When you have finished, select OK.
Re-enter the password to confirm. Use the keypad to re-enter the password
exactly as you entered it the first time. When you
have finished, select OK.
Select OK to activate the password. To return to the System Settings menu
without setting the password, select ESC.
Once the password is enabled, you will be required to enter it when the
Magellan Maestro 4000/4040/4050 is turned on or when it wakes up from
“sleep” mode.
10.3.3 Delete Password
Select Delete Password and use the keyboard to enter the password.
A dialog box will apper asking you to confirm your selection. Select Yes.
10.4 Language
To change the language for the menu text and voice prompts for navigation,
select Language.
Select the desired language. A dialog box will appear asking you to confirm
your selection. Select Yes.
The Magellan Maestro 4000/4040/4050 will restart itself with the new
language enabled.
Chapter 11: System Status
The System Status menu give you further options to
check the performance of your Magellan Maestro
4000/4040/4050.
11.1 Product Information
Select Product Information to show the current application software versions.
Also, the current hardware and firmware versions will be displayed.
11.2 User Storage
Select User Storage to display the available space of
the memory card if it is
installed..
11.3 Diagnostics
Diagnostics enables you to test
elements of the Magellan
4000/4040/4050
key performance
Maestro
11.3.1 Audio Test
The Audio Test will check the performance of the
built-in speaker.
11.3.2 Touchscreen Test
The Touchscreen test will enable you to recalibrate
the touchscreen should it not be tracking properly.
11.3.3 Keypad Test
The Keypad test will determine if the buttons on the Magellan Maestro
4000/4040/4050 are functioning.
11.3.4 Video Test
The Video test will test to determine if the screen is displaying colors
properly.
Chapter 11: System Status
11.4 Contact Us
If you experience problems using your Magellan Maestro 4000/4040/4050,
you can contact us at the numbers displayed.
Chapter 12: Magellan Maestro Tools
Installation
The Magellan Maestro Tools application enables you
to create custom POI’s and load them onto your
Magellan Maestro 4000/4040/4050. Additionally, you
can load pictures and music onto an SD or MMC card (sold separately) to
view or play anytime. See “Using Removable Memory Cards” on page 9.
12.1 Installing the Software
Insert the Magellan Maestro Tools PC Application CD into your PC’s CD
drive.
The setup application will begin automatically. If it does not, browse your
computer’s CD drive and double-click on the setup.exe file.
Select a default language for the Application.
The Welcome screen will appear to begin the installation process.
Choose a destination for the application. Select Next to use the default
location, or select Browse to choose a custom destination. Next, choose a
Program Folder to place the application icons.
The Magellan Maestro Tools software will be installed. After it has finished
installing, a dialog box pertaining to Microsoft DIgital Signatures may
appear, select OK
When it has finished, to can have the installer launch the application
automatically, or deselect to exit without launching the application. Select
Finish.
Chapter 13: Magellan
Maestro Music Manager
The Magellan Maestro Music Manager
enables you to transfer song files in MP3
or WMA format from your computer to
an optional memory card (see “Using
Removable Memory Cards” on page 9)
installed in your Magellan Maestro
4000/4040/4050. The amount of music
you can load depends on the size of the
card.
Insert the memory card into the memory
card slot as show on page 9. Turn on
your Magellan Maestro 4000/4040/4050
by pressing and holding the Power button
for approximately 2-3 seconds if in sleep
mode. (Ten seconds if not in sleep mode.)
When the Warning screen appears, insert
the small end of the USB cable into the
USB port on your Magellan Maestro
4000/4040/4050 and the large end into an
available USB port on your computer.
Launch the Magellan Maestro Tools application. From the Magellan
Maestro Tools screen, click on Music.
The left side of the window shows the contents of your computer and the
right side of the window shows the contents of the memory card installed in
your Magellan Maestro 4000/4040/4050.
Locate the song files you wish to load. When you have selected a file, the
Transfer arrow will turn green. Click on the Transfer arrow to copy the
file(s) to the memory card.
In the same way, if you have
loaded song files onto a
memory card from another
computer, you can copy the
files from the memory card to
your computer.
When you have finished
copying files, remove the USB
cable from the Magellan
Maestro 4000/4040/4050.
Chapter 14: Music
Player
The Magellan Maestro
4000/4040/4050 Music Player
enables you to play music files
in MP3, or WMA format,
stored on an optional memory
card installed in your Magellan
Maestro 4000/4040/4050. If
you have not already done so,
you must install the Magellan
Maestro Tools application
(page 102) and transfer files onto the card using the Magellan Maestro
Music Manager (page 103). You can also use a memory card that has been
preloaded from a card reader.
Press the MENU key on the Magellan Maestro 4000/4040/4050
(see page 5) and select the Music Player.
The Music Player control pad will appear.
14.1 Single Song Play
Select Browse Music
Use the Navigation key or the Down arrow
to select the song file you wish to play and
press OK.
The song will begin playing automatically.
At the top of the screen is displayed the name of the song, the artist (if
available), the selected play mode, the elapsed time, and the song duration.
Press the Play/Pause button to suspend song play. To resume song play,
press the Play/Pause button again.
Press the Stop button to stop song play. Once a song
has been stopped, pressing the Play/ Pause button will
start the song from the beginning.
14.2 Multiple Song Play
Multiple song play enables you to create a “playlist”.
A playlist consists of one or more songs in a group
that can be played continuously.
Chapter 14: Music Player
Select Playlist
The Playlist menu will appear. To exit from the playlist menu, select ESC.
14.2.1 Play
To hear a previously created playlist, select Play.
Use the Up or Down arrow to select the desired
playlist. Select OK.
The songs will begin playing automatically in order.
14.2.2 Create
To make a new playlist, select Create.
Use the backspace key (<-) to erase the default name;
and the keypad to enter a new name for your playlist. When you have
finished, select OK.
The next screen to appear shows the song files stored on the memory card
on the left side, and the playlist on the right side.
Use the arrow buttons on the left side of the screen to highlight the Music
folder and then, select List Files.
Use the arrow buttons to highlight the song files you wish to add to the
playlist. Select Add to Playlist (right arrow) to add
the highlighted song to the playlist.
Continue adding files to the playlist. When you have finished, select OK.
14.2.3 Modify
Modify enables you to add or remove songs from the selected playlist.
Select Modify.
To remove a song from the playlist, use the arrow keys on the right side of
the screen to highlight the desired song and then
select Remove From Playlist (left arrow).
Use the arrow buttons on the left side of the screen to highlight the song
files you wish to add to the playlist. Select Add to
Playlist (right arrow) to add the highlighted song to the playlist.
Continue adding files to the playlist. When you have finished, select OK.
14.2.4 Delete
To remove a playlist, select Delete.
Select the playlist you wish to delete and select OK.
A dialog box will appear asking to confirm your selection. Select Yes to
delete the playlist.
Chapter 14: Music Player
14.2.5 Rename
If you want to change the name of a playlist, select Rename.
Select the playlist you wish to rename and then, select OK.
Use the backspace key (<-) to erase the name; and the keypad to enter a new
name for your playlist. When you have finished, select OK.
14.3 Play Mode
While in single song play, select Play Mode for song play options.
Repeat All - Repeats all the songs in the current playlist starting at the
beginning of the order.
This function works only if there are two or more songs in the playlist.
Repeat - repeats the song that is currently playing.
Preview - Plays the first five seconds of each song in the current playlist.
Normal - Plays all songs in the current playlist in order.
Random - Plays the songs in the current playlist in random order.
14.4 List Songs
Select List Songs to view the current playlist.
Chapter 14: Music Player
14.5 Equalizer
The Equalizer provides advanced sound options so you can customize the
quality of the playback. The equalizer will only be available for MP3 format
sound files. Select an equalizer preset from the following preconfigured
options: Default (flat), Jazz, Classical, Rock, Techno, Dance Hall, Live, Full
Bass, Full Treble, and Full Bass & Treble. You are not able to however,
manually set the equalizer.
Select the Equalizer
Select the equalizer preset by pressing the button at the top of the
screen
When you are satisfied with your selection, select OK. To exit
without setting the equalizer, select ESC.
14.6 Help
Select Help
for descriptions of the Music Player buttons.
Chapter 15: Magellan Maestro Photo Manager
The Magellan Maestro Photo Manager enables you to transfer image files in
multiple formats from your computer to an optional memory card (see
“Using Removable Memory Cards” on page 9) installed in your Magellan
Maestro 4000/4040/4050. The number of images you can load depends on
the size of the card. You can also use a memory card that has had images
preloaded using a card reader.
Insert the memory card into the memory card slot as show on page 9. Turn
on your Magellan Maestro 4000/4040/4050 by pressing and holding the
Power button for approximately 2-3 seconds (Ten seconds if the Magellan
Maestro 4000/4040/4050 is not in sleep mode.) When the Warning screen
appears, insert the small end of the USB cable into the USB port on your
Magellan Maestro 4000/4040/4050, and the large end into an available USB
port on your computer.
Launch the Magellan Maestro Tools application. From the Magellan
Maestro Tools screen, click on Photo.
The left side of the window shows the contents of your computer and the
right side of the window shows the contents of the memory card installed in
your Magellan Maestro 4000/4040/4050.
Locate the image files you wish to load. When you have selected a file, the
Transfer arrow will turn green. Click on the Transfer arrow to copy the
file(s) to the memory card.
In the same way, if you have
loaded image files onto a
memory card from another
computer, you can copy the
files from the card to your
computer.
When you have finished
copying files, remove the USB
cable from the Magellan
Maestro 4000/4040/4050.
Chapter 16: Photo
Viewer
The Magellan Maestro Photo
Viewer enables you to view
image files in JPG and BMP
format, stored on an optional
memory card installed in your Magellan Maestro 4000/4040/4050. If you
have not already done so, you must install the Magellan Maestro Tools
application (page 102) and transfer files onto the card using the Magellan
Maestro Photo Manager (page 103).
Press the MENU key on the Magellan Maestro 4000/4040/4050
(see page 5). Select the Photo Viewer
The Photo Viewer screen will appear. The Photo viewer will show the
contents of the SD or MMC card installed in your Magellan Maestro
4000/4040/4050..
16.1 View Single Photo
The next screen to appear shows the file
structure of the memory card. Select List Files
Use the Navigation key or the
Down arrow
to highlight the photo you wish
to view and
select View.
While viewing the image, double clicking on the image (that is tapping
twice on the screen) will show the image in full screen. You can then cycle
through the images by pressing left or right
on the Navigation key.
16.1.1 Previous Image (left arrow)
Press the right arrow button to view the previous image in the folder. This
button is grayed out (not functional) when viewing the first image in the
folder.
16.1.2 Zoom
Press the Zoom button to reduce or enlarge the current photo. The top of the
zoom menu shows the current zoom level. Select another zoom level from
the list of presets. Select Best Fit to adjust the zoom to fit within the display
boundaries; select Actual Size to display the image at 100%; select 25% to
150% to reduce or enlarge the image to the preset level.
Chapter 16: Photo Viewer
16.1.3 Slideshow
Press the Slideshow button to cycle through all the photos in the Pictures
folder automatically.
16.1.4 Pan
If you enlarge an image beyond the screen boundaries, press the Pan button
to enable image scrolling. While enabled, you can drag the image in any
direction to view other areas of the image. Press the Pan button again to
disable Pan mode.
16.1.5 Rotate Image
Press the Rotate Image button to rotate the image 90° counterclockwise, 90°
clockwise, or 180°.
16.1.6 Next Image (right arrow)
Press the right arrow button to view the next image in the folder. This button
is grayed out (not functional) when viewing the last image in the folder.
16.1.7 ESC
Press ESC to return to the folder list.
16.2 Manage Photos
16.2.1 List View
Press List view to show the files in a hierarchal list view.
16.2.2 Thumbnail
Press Thumbnail to show the files as thumbnails.
16.2.3 Rename
To change the name of the selected file or folder, press Rename.
Use the backspace key (<-) to erase the name; and the keypad to enter a new
name for your file. When you have finished, select OK.
Chapter 16: Photo Viewer
16.2.4 Properties
To view information on the selected file or folder,
press Properties. A thumbnail of the image will be
displayed along with the width and height in pixels, the size, and the format
(image type). When viewing the properties for folders, width, height, and
format are not shown. Size shown is the combined size of all images in the
selected folder.
When you are finished viewing the properties, select OK.
16.3 Tools
16.3.1 Preferences
General – The General preferences, you can set the default file view to
either thumbnail or file list view.
Slideshow – The slideshow preferences enable you to
set the view properties, the sequence of photos, the
transition between photos, and the duration between
photos.
Background – The background preferences enable
you to set the color of the background behind the photo being viewed.
16.3.2 Delete Files
Use the arrow keys to select the file or folder you wish to delete. Press the
Delete button (trash can). A dialog box will appear asking to confirm your
selection. Select Yes to delete the file.
16.3.3 About
This option will display the current version of the Photo Viewer software.
Chapter 17: Magellan Maestro POI Manager
The Magellan Maestro POI Manager enables you to transfer custom points
of interest files from your computer to your Magellan Maestro
4000/4040/4050.
Before we add any custom POI’s to the Magellan Maestro 4000/4040/4050,
you should understand how the POI Manager plots POIs.
17.1 Latitude
90° (North Pole)
Latitude can be expressed by dividing Earth into horizontal segments
totalling 180 degrees. Starting at the Equator, or zero degrees Latitude, lines
(or Parallels) are drawn in 10-degree increments 90 degrees to the north and
90 degrees to the south. If your location is below the Equator,
30°
you are at a South Latitude.
20° 10° 0° 0° 10° 20° 30° 40°
17.2 Longitude
Conversely, longitude lines can be
expressed by dividing Earth into vertical
segments totalling 360 degrees. Starting at
the Prime Meridian (which is The Royal
Observatory in Greenwich, England), or
zero degrees Longitude, lines are drawn in
10-degree increments 180 degrees to the
West and 180 degrees to the East. If your
location is on the western hemisphere, you
are at a West Longitude.
Additionally, to narrow down your location further, each 10-degree segment
is divided into 60 smaller segments called minutes and, still further, each
minute is divided into 60 segments called seconds.
To express this in coordinates, the city of Los Angeles is located at 34°
(degrees) 03’ (minutes) and 08 (seconds) North of the Equator, and 118°
(degrees) 14’ (minutes) and 42 (seconds)
West of the Prime Meridian.
Chapter 17: Magellan Maestro
POI Manager
17.3 Altitude
Each location can also have an Altitude.
Altitude is expressed by how far the point
is above or below the level of the ocean, or
100’ Above Sea Level. For example, Los
Angeles, California is about 300 80’ Above
feet above sea level. Death Valley, California is about 270 feet below sea
level. 60’ Above
40’ Above 20’ Above Sea Level 0’ 20’ Below 40’ Below 60’ Below 80’
Below
100’ Below
Turn on your Magellan Maestro
4000/4040/4050 by pressing and
holding the Power button for
approximately 2-3 seconds, 10
seconds if not in sleep mode (see
“Top View” on page 6). When the
Warning screen appears, insert the
small end of the USB cable into the
USB port on your Magellan
Maestro 4000/4040/4050, and the
large end into an available USB
port on your computer.
Launch the Magellan Maestro
Tools application. From the Magellan Maestro Tools screen, click on POI.
The left side of the window shows the contents of your computer and the
right side of the window shows the contents of the Magellan Maestro
4000/4040/4050.
17.4 Opening a POI File
When you start the POI Manager the contents of your “My POI’s” folder
will be displayed. This is the default location for storing custom POI files.
Chapter 17: Magellan Maestro POI Manager
Locate the POI files you wish to load. When you have selected a file, the
Copy To Unit arrow will turn green. Click on the arrow to copy the file to
your Magellan Maestro 4000/4040/4050.
When you have finished copying files, remove the USB cable from the
Magellan Maestro 4000/4040/4050.
17.5 Creating a New POI FIle
There are two ways to create a POI file. You can either add POI’s
individually, or you can import a character delimited file containing the
information need to plot the POI’s. To plot a POI, each item must have a
name, longitude, and latitude. Longitude and latitude must be in decimal
format.
17.6 Adding Individual POI’s
Click on the New POI File Button to launch the POI Editor.
Click on the Add button
Enter the Name, the Latitude, and the Longitude. The Altitude and
Description fields are optional.
Chapter 17: Magellan Maestro POI Manager
Select the Category field and select New. A dialog box will appear to create
a new POI category. Enter the Name and assign an Image (icon) for the POI.
The Description field is optional.
The Alert feature is an audible alarm that lets you know when you are
within a certain distance from the POI. You can set an initial reminder
(Distance 1), a secondary reminder (Distance 2).
Distance 1 Distance 2
Select your preferred unit or measure (Meters or Feet).
The Detection angle sets the range of alert in degrees from the POI.
Select Activate alert for this category to
enable the alert settings. When you have
finished, select OK.
Chapter 17: Magellan Maestro
POI Manager
17.7 Importing a Data FIle
The POI Manager software supports ASCII
file format (.ASC,.CSV,.TXT); GPS
Exchange file format (.GPS,.XML); Magellan Waypoint file format
(.WPT,.RTE); and Garmin PCX5 Waypoint file format (.WPT,.RTE).
Click on the Open button
Select the file you wish to import and click Open.
Start by choosing which line in the data file to start importing data. If your
data file has a header row, this row will generate
an error so you should start at line two or below.
Next, choose how the data is separated and click on Next.
You now need to define the data columns. Click on the pull down menu and
assign a field name to the appropriate column.
Click on Finish.
Click on The Save POI file button. Assign a name to your file and click on
Save.
Close the POI File Editor. Select the POI file you just created and click on
the transfer button (right arrow) to upload the file
to your Magellan Maestro 4000/4040/4050.
See page 55 for information on accessing custom POIs on your Magellan
Maestro 4000/4040/4050.
Appendix
POI Categories
The Magellan Maestro 4000/4040/4050 POI database has 37 different
categories. The icons will appear on the Map screen (if enabled):
Restaurant
Fast food, diners, and food marts
Bank/ATM
Most financial services
Gas Station
Most fuel services
Roadside Assistance
Towing companies
Hospital/Polyclinic
Most medical services
Vehicle Services
Repair shops, tire stores, and oil changes
Airport
International and Municipal airports
Camping & RV
Campgrounds, camping areas, and RV
parks
Car Rental
Car rental companies
Casino
Gambling venues
City Center
The geographical center of a selected city
Clothing
Clothing retail stores
Convention Center
Major Convention Centers
Education
Schools, Colleges, and other learning
institutions
Emergency Services
Police, FIre, and Emergency Rooms
Entertainment
Movie theaters, live performance venues
Golf Course
Private and public courses
Grocery Store
Major chains and local markets
Hair & Beauty
Salons and beauty parlors
Health Care
Doctors’ offices and pharmacies
Home & Garden
Nurseries and do-it-yourself centers
Hotel or Motel
Most overnight stay locations
Marina
Docks and harbors
Misc. Services
Other services not categorized
Nightlife
Dance halls, pubs, nightclubs
Open Parking Area
Parking lots and garages
Appendix
Parks
County, regional, and local parks
Professional Services
Business office locations
Public Buildings
Libraries, museums, and government
buildings
Rest Area
Rest stops along major highways
Shopping
Malls and other retail stores
Ski Resorts
Most major ski resorts
Sports & Recreation
Stadiums, parks, lakes
Tourist Attraction
Places most visited by tourists
Transportation
Bus and train stations
Winery
Vinyards and tasting locations
Worship
Churches, temples, mosques
When selecting restaurants, you can further narrow
the search by cuisine type such as French, Italian,
Greek, Mexican, etc.
Appendix
Specifications
DImensions: 3.8" x 4.8" x 1.4" 9.6cm x 12.2cm x 3.5cm Weight: 8.64 oz.
245 g Display: 3.5” color touch screen display, 2.11” x 2.81” (53.64mm x
71.52mm) Screen Resolution: 320 x 240 QVGA; 64,000 colors Accepted
Card Media: Secure Digital (SD) or Multimedia Card (MMC) Audio:
Integrated Speaker with integrated stereo headphone jack GPS
Antenna: Integrated with optional external antenna connection Battery:
2100mA LI-ION USB Interface: 1.0 Operating Temperature: 32°F to
104°F 0°C to +40°C Storage Temperature: -4°F to 158°F -20°C to
+70°C Humidity: 50% ± 20% ambient room
PC Requirements
IBM Compatible PC, Pentium or higher
Microsoft ® WIndows® 2000 or XP
128 MB RAM
CD Drive for Software Installation
DVD Drive for Map Upgrades
USB Port
Appendix
GPS Status Screen
GPS STATUS Screen Structure-first page
CH
PRN
AZ
EL
SNR
U/N
01
d1
d2
d3
d4
c1
02
03
04
05
06
07
08
09
10
11
12
d1
d1
d1
d1
d1
d1
d1
d1
d1
d1
d1
d2
d2
d2
d2
d2
d2
d2
d2
d2
d2
d2
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d3
d4
d4
d4
d4
d4
d4
d4
d4
d4
d4
d4
c1
c1
c1
c1
c1
c1
c1
c1
c1
c1
c1
13
14
d1
d1
d2
d2
d3
d3
d4
d4
c1
c1
It is ordered by the channel number from 1 to 12.
Where:
d1: Satellite PRN number, with “e” or “E” to the right means got
ephemeris data, “v” or “V” to the right means got verified
ephemeris data (double check). “E” or “V” also means got satellite time
for this channel.
d2: Azimuth, in degrees
d3: Elevation angle, in degrees
d4: SNR (signal to noise ratio), it is ratio-Hz, not dB unit
c1: U – Used for position fix, U – Not used for position fix
Bad fix code
0 PVT_OK :good fix 2 ILLEGAL_ALT: illegal altitude < -10km or >
17.5km 4 POSITION_JUMP: too big position jump between two epoch
(300 miles) 5 ILLEGAL_VELOCITY_OR_ALT: max velocity 951mile
7 TOO_BIG_ACCELERATION max 15m around 1.5g 8
TOO_SMALL_ALTITUDE -10000 m 9 TOO_BIG_ALTITUDE 17,500
m 10 TOO_BIG_PDOP max PDOP 50 11
SATS_BELOW_MASK_ANGLE satellite elevation angle is below mask
angle 16 ILL_DEFINED_3D_MATRIX 3X3 matrix can not be inverted
in 3D fix
Appendix
17 ILL_DEFINED_2D_MATRIX 2X2 matrix can not be inverted in 2D
fix 20 NO_SAT_TIME no satellite time 23 NOT_ENOUGH_SATS no
enough satellite for 2D or 3D fix 24 CANNOT_SELECT_FIX_TYPE 30
VELOCITY_2D_ONLY 2 satellite fix only for velocity, no position fix
31 BAD_VELOCITY_PDOP 50 too big pdop for velocity 32
TOO_MANY_SATS_FOR_2D_VEL there are 4 or more satellites, but
2D fix provided 51 WRONG_NUMSAT number of satellite for fix > 12
or less 2 56 LOOP_3D_NOT_CONVERGING 3D initial fix is not
convergent 57 MILLISECOND_ERROR millisecond jump happened
58 LOOP_2D_NOT_CONVERGING 2Dinitial fix is not convergent 59
BAD_RANGE_CHITEST; range post-fix residuals chi-test failed 60
BAD_DOPPLER_CHITEST doppler post-fix residuals chi-test failed 61
OSC_DRIFT_ERR too much clock drift 60HZ for XO, 7.5HZ for
TCXO 62 BAD_DOPPLER_ERR too big Doppler errors 4m/s 63
BIG_RANGE_RESID 110m/40m depend on virtual ttagl/ DGPS factors
64 BIG_DOPPLER_RESID 0.7m/s 65 HUGE_RANGE_RESID 10km
normal for postfit residuals for range 66 HUGE_DOPPLER_RESID
100m/s normal for postfit residuals for doppler Usually, Bad code is 20
and 23. If fix is good, it would be 0.
GPS STATUS Screen Structure - second page
Heading XXX (degree) Speeding XX.X (meter per second)
Current Lat: DDD.DDDDD W/E (current latitude, degree)
Current Long: DDD.DDDDD N/S (current longitude, degree)
Current altitude XXXX (altitude in mean sea level meter) TTFF
XXXXs (Time-To-First-Fix in second)
#Satellite (U/T) XX/XX (the number of satellite used and tracked)
PDOP XX.X (Position Dilution Of Precision)
VDOP XX.X (Vertical Dilution of Precision)
TDOP XX.X (Time Dilution of Precision)
HDOP XX.X (Horizontal Dilution of Precision)
FOMS P/V/H
(Figures Of Merits for position, velocity and heading in map
matching)
UTC TIME MM/DD/YY HH:MM:SS(UTC time without local zone)
Appendix
Typical GPS STATUS Screen Display
First Page
CH
PRN
AZ
EL
SNR
U/N
01
27V
311
54
334
02
03
04
05
06
07
08
09
03E
13e
20e
31v
01V
28V
08V
02V
078
079
175
119
120
220
282
046
29
81
06
34
53
13
29
27
135
204
90
179
316
152
182
173
10
11
12
13
14
84
10
72
134
122
255
325
105
255
105
12
06
13
12
13
47
34
50
63
Second Page Heading 0 Speed 0.0 m/s Current Lat: 34.10939 N Current
Long:117.82599 W GPS Version: Current altitude 255 TTFF 116s
#Satellite (U/T) 11/12 PDOP 2.3 VDOP 1.7 TTFF 0.0 HDOP 1.3 FOMS
P/V/H 2 UTC TIME 08/16/2004 22:56:53
Appendix
Frequently Asked Questions
Why is my street not showing up on the map?
The Magellan Maestro 4000/4040/4050 uses the most current available
map data. Chances are, your street is in a new housing development or
the street is new. Map updates may be made available once per year.
I know there is a gas station on this street corner, why is there not icon for
it on the map?
Check your POI settings and make sure you have the necessary POI
checked to make it visible on the map. See “POI Selection” on page 55.
The Magellan Maestro 4000/4040/4050 uses the latest POI data
available. Chances are the POI you are looking for is relatively new and
has not been added to the database. If this is not the case, it may have
been overlooked or changed since the POI database was created. You
can add custom POIs to your Magellan Maestro 4000/4040/4050 to
make up for those you route to often. See “Chapter 17: Magellan
Maestro POI Manager” on page 112., and “Custom POIs” on page 55.
The GPS signal is weak. What’s going on?
You may be driving through an area that has tall buildings or trees, or
a canyon, or a tunnel. These conditions may interfere with satellite
signals. Wait a few moments and the signal should get better as more
satellites are acquired. If the problem persists, there may be a problem
with the antenna. Contact Technical Support.
Why is an address I know I routed to not in the Previous Destinations list?
The Previous Destinations list stores the last 50 places you routed to.
When you get to number 51, the first destination on the list is removed
and each successive destination is moved up.
Can I play MP3’s and Route at the same time?
No
Can I import a play list from Windows Media Player?
No. The Music Player does not support playlists from other applications.
Can I use any third party SD/MMC card with the Magellan Maestro
4000/4040/4050
The Magellan Maestro 4000/4040/4050 is compatible with most major
brands of SD/MMC card.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 8.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2007:02:07 14:35:45+08:00
Create Date                     : 2007:02:07 14:35:45+08:00
Metadata Date                   : 2007:02:07 14:04:29+08:00
Format                          : application/pdf
Title                           : Microsoft Word - 631361-01A.htm
Creator                         : Marco
Document ID                     : uuid:8b782627-7a69-473f-86e1-d60731e12674
Instance ID                     : uuid:e3958e54-f6cd-445e-ada8-9cf28cdd868e
Page Count                      : 66
Author                          : Marco

EXIF Metadata provided by EXIF.tools