Mitac Digital Technology N538-5000 Portable Navigation Device User Manual
Mitac International Corporation Portable Navigation Device Users Manual
Users Manual
Quick Start Guide Magellan RoadMate Connect with us @MagellanGPS This booklet will give you the information you need to get started with your new Magellan receiver. Detailed information on how to use the various features can be found at magellanGPS.com/support Safety Take care when mounting the receiver in your vehicle, whether using the windshield mount or other mount or accessories, that it does not obstruct the driver’s view of the road, interfere with the operation of the vehicle’s safety devices such as air bags, or present a hazard to occupants of the vehicle should the receiver be dislodged while driving. You assume the risks associated with damage to your vehicle or vehicle occupants as the result of your choices in mounting the receiver. This Magellan receiver is a vehicle-navigation aid designed to assist you in arriving to your selected destinations. Please check with your state or local law enforcement for applicable regulations regarding mounting to the windshield. Go to www.magellanGPS.com for alternate mounting solutions. The driver should enter data or program the Magellan receiver only when the vehicle is stopped. Only a vehicle passenger should enter data or program the receiver while the vehicle is moving. The battery is rechargeable and should not be removed. In the event it should need to be replaced, please contact Magellan Technical Support. It is your responsibility to comply with all traffic laws. Every attempt is made to ensure that the database is accurate. However, roadways, points of interest (POIs), and business and service locations may change over time. Magellan Take-Back Program Magellan’s Take-Back Program provides a way for consumers to recycle certain Magellan equipment. As part of this program, all Magellan GPS models will be accepted. Keep the receiver safe from extreme temperature conditions. For example, do not leave it exposed to direct sunlight for an extended period of time. The maximum operating temperature is 140°F (60°C). Visit magellanGPS.com for more information. Safety Federal Communication Commission Interference Statement provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for class B digital devices, in accordance with part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This equipment must be installed and operated in accordance with Safety In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with nonapproved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user’s authority to operate this equipment. IC Radiation Exposure Statement This equipment complies with IC radiation exposure limits established for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. The Magellan RoadMate receiver must be installed and operated at a distance no closer then 8 inches (20 cm) from the user. Déclaration d’exposition à la radiation : IC Statement Cet équipement respecte les limites d’exposition aux rayonnements IC définies pour un environnement non contrôlé. Cet équipement doit être installé et mis en marche à une distance minimale de 20 cm qui sépare l’élément rayonnant de votre corps. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur ne doit ni être utilisé avec une autre antenne ou un autre émetteur ni se trouver à leur proximité. The information provided in this document is subject to change without notice. Improvements and enhancements to the product may occur without any formal notification. Check the Magellan website (www.magellanGPS.com/ support) for product updates and additional information. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe [*] est conforme à la norme NMB-003 du Canada. Getting Started First Time Use Power On/Off Choose a location Press and hold the Power button to turn the device on. To turn off the device, press the power button again. The device will automatically power down after 15 seconds. Follow the Safety guidelines, and find a location with a clear view of the sky. Clean the surface Clean the area on the windshield where the device will be mounted. Allow the surface to dry. Install the car cradle Note: Actual product may differ from illustration shown. Hold the cradle firmly against the window surface and push lever towards the base. Snap the device on to the cradle. Connect power The device has an internal, rechargeable battery that charges whenever it is connected to vehicle power or a compatible wall charger. Your device may not be fully charged when you purchase it. Satellite Signal Strength Battery To view the satellite signal strength indicator, tap on the Menu button. The signal strength indicator can be found in the upper right corner. The Magellan RoadMate receiver has an internal battery that is charged when it is being powered by the vehicle power cable or an external (optional) AC power adapter. Tap on the Satellite/Battery icon to view the status and position of current GPS satellites. It can take up to 4 hours to fully charge the battery, depending on the battery level. However, the battery does not need to be fully charged to use the Magellan RoadMate receiver. 4 bars: Strong signal Blank: No satellite signals. Unable to compute position. Battery Level (Full) Important Various factors influence GPS signal reception and there are some tips you can follow to improve the signal reception and time it takes to calculate the current location. • Leave any enclosed structure, (garage, parking structures, etc.). • Make sure you have a ‘clear view of the sky’. Buildings and trees can have an impact on GPS signal reception. • Be sure that the device is mounted where it can have a clear line of sight to the windshield. Note: The first time the device calculates its location can take up to 1 minute. Subsequent times will be 15 seconds on average. Map Screen Turn Instructions/ Next Maneuver OneTouch Menu Speed Limit Volume/Brightness Traffic Alert* Highway POIs Information display Main Menu Zoom In/Out Current location * Available on select RoadMate models. Menu Screen Satellite Signal Strength Battery Life Indicator Scroll Up/Down Back to Map Screen Settings Address Book OneTouch QuickSpell The OneTouch menu provides easy access to destinations and searches you use most. Some buttons are assigned by default while others can be assigned by you. User-assigned buttons can be commonly used for destinations or POI searches. Your Magellan RoadMate receiver uses a feature known as QuickSpell for entering cities and streets. QuickSpell displays only those keys that could be used to enter a city or street that is in the receiver’s memory. Saving Searches. Tap on the Assign button and you will be asked to assign a button as a location or a search. Saving a search as a OneTouch button gives you a way of performing searches you may do commonly, such as ‘Nearest Coffee’. The OneTouch menu is accessed by tapping on the OneTouch icon found in the upper right corner of the Map screen. Emergency Button. The OneTouch display has an Emergency button that can provide immediate directions and phone information for the nearest police station, hospital, or automotive repair facility. 10 Routing Points of Interest (POI) 1. From the Map Screen, tap Menu and then Address. The Magellan RoadMate receiver has preloaded POIs that can be used as a destination for a route. Selecting a restaurant or finding a gas station nearby is at your fingertips. 2. Enter the address. Start with city name (or tap Zip Code). Tap on green check mark. POIs are categorized into unique categories from gas stations to tourist attractions. Most, but not all categories are further organized into subcategories. 3. Enter the street name. Choose the address from the list. Tap on check mark to confirm. 4. Enter street number. Tap on check mark. 5. Tap GO to begin routing. 1. From the Map Screen, tap Menu and then tap the Points of Interest icon. Tips 2. Tap one of the POI categories in the list. If the next screen contains a list of subcategories, pick one to further narrow the search. • After completing Step 4, you may tap on Options to access Route Options (Fastest Time, Shortest Distance, Mostly Freeways, Least Use of Freeways). 3. POIs near your current position are displayed. You can tap “Near...“ for different search criteria. • Tap Save, to save the location in the Address Book or Add to OneTouch. 4. The GO screen appears with the address of the selected location and other relevant information. Tap GO to start the routing. 11 Bluetooth phone with your RoadMate device, first disconnect the current Bluetooth connection on the mobile phone, then repeat the above procedure to set up a new connection. If you have a compatible mobile phone with Bluetooth wireless technology, you can use your Roadmate device as a hands-free car kit. Pair RoadMate with Bluetooth device 1. On the Main Menu, tap Settings > Bluetooth. 2. Tap On to turn on the Bluetooth of your RoadMate device. 3. Make sure that the Bluetooth feature of your phone is turned on. 4. From your phone, scan for nearby Bluetooth devices. 5. From the device list, select your RoadMate device. 6. To pair your phone with your RoadMate device, enter 1234 on the mobile phone when prompted. Note: To pair another Bluetooth mobile Add Contacts to RoadMate device On the Main Menu, tap the Phone icon. Your RoadMate device uses contacts created on your mobile phone. If there are no contacts on your RoadMate, you will be prompted to download the contact list from your phone. 12 • To search for a contact, tap Contacts > tap Filter to enter the contact name > tap OK. • To add a phone number to your favorites, tap Contacts and tap the desired contact from the list. Then tap the Favorite (heart) icon in the entry. Tap the red Favorite (heart) icon to remove the entry from Favorites. To refresh the contact list, tap the Refresh Contacts icon next to the Filter field. list. 8. Make a Hands-Free call Tap the Phone icon next to the desired number to place the call. To make a call using the keypad: Respond to a Phone Call 1. On the Main Menu, tap the Phone icon. When you receive a call: 2. From the Phone screen, tap the Dial icon. • tap Answer to answer the call. 3. Enter the number you want to call. To delete the last digit entered, tap the Backspace icon. • tap Ignore to reject the call. 4. In-Call Options Tap Call to place the call. Note: International calls require a country code to be included in the phone number. On your RoadMate, the country code is separated from the rest of the number sequence by a + sign. If you are making an international call, tap and hold 0 until the + sign appears. • To minimize the call screen, tap the Minimize icon. • To display the keypad screen, tap the Keypad icon. • To switch off the microphone so that the receiving party cannot hear you, tap the Microphone icon (turns red and X appears). To unmute, tap Microphone again (turns gray). • To transfer the call to your phone, tap Voice to Phone. Make a Call from the Phonebook 5. On the Main Menu, tap the Phone icon. 6. From the Phone screen, tap Contacts. 7. Select the desired item from the Contacts 13 • To delete an entry from the history, tap the entry and tap the Trash icon. Note: The phone volume adjustment does not change the device volume. • To place a call, tap the entry and tap the Call (phone) icon. • • To delete all entries in the history, tap the Trash icon from the Call History screen. • To adjust the volume, tap on the volume bar to increase or decrease the volume. To end the call, tap Hang Up. View Call History From the Phone screen, tap the Call History icon. The Call History screen lists the calls made during the time your RoadMate device is connected to a mobile phone. Numbers are arranged by time with the most recent time at the top. Your RoadMate can store up to 30 history entries (limited to 10 entries each for incoming, outgoing, and missed calls). • To view the specific type of calls, tap All on the Call History screen and select the desired type. • To add a number to your favorites, tap the Favorite (heart) icon in the entry. Tap Favorite again to remove the item from the favorites. 14
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Language : en-US XMP Toolkit : Adobe XMP Core 5.6-c123 79.158978, 2016/02/13-01:11:19 Create Date : 2016:09:29 08:07:41-07:00 Metadata Date : 2016:09:29 08:07:55-07:00 Modify Date : 2016:09:29 08:07:55-07:00 Creator Tool : Adobe InDesign CC 2015 (Windows) Instance ID : uuid:bd20f1f1-699b-4f18-9e32-98443c44393a Original Document ID : xmp.did:c090cf9b-9ab5-704a-ae9a-4a02671cf760 Document ID : xmp.id:ed1f0223-f92b-f246-8137-1e3ca768d257 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:386cf6e2-871a-c941-8d99-5ce239b1c9fd Derived From Document ID : xmp.did:fd0f69e9-f8ef-284d-96af-a2fbe7a893f1 Derived From Original Document ID: xmp.did:c090cf9b-9ab5-704a-ae9a-4a02671cf760 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Windows) History Changed : / History When : 2016:09:29 08:07:41-07:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Layout : SinglePage Page Count : 14 Creator : Adobe InDesign CC 2015 (Windows)EXIF Metadata provided by EXIF.tools