Mitek 278003465 Bluetooth controller User Manual

Mitek Corp Bluetooth controller

Contents

User manual

MTX.COM+VOLPOWERVOL–278003465BLUETOOTH REMOTE CONTROLOWNER’S MANUAL
MTX.COM2IMPORTANT NOTICEIf you have any questions regarding wire routing in a vehicle, please contact MTX Technical Support at 1-800-225-5689.When connecting power and ground wires ensure that the yellow power wire is fused at the point where it is connected to the vehicle’s battery. Failure to do so can result in damage to the vehicle if a short circuit develops between the vehicle connection point and the product.PRODUCT INFORMATIONModel #Serial #Dealer’s NameDate of PurchaseINTRODUCTIONThank you for purchasing this Bluetooth remote control that is designed to work with most Bluetooth enabled devices including iPhone® and Android® smartphones and tablets. This easy to install and use all in one unit is capable of transforming your Bluetooth enabled mobile device into the center of your vehicle’s audio system. Designed to mount a variety of vehicles and able to work with most ampliers, the Bluetooth remote control can be used on motorcycles, side-by-sides, boats, cars, or trucks. Congratulations and enjoy the ultimate audio experience with MTX!FEATURES• Bluetooth Receiver and Remote Control• Weather-Proof Design• Five Front Panel Touch Controls• Works with Most Bluetooth Devices Including Smartphones and Tablets+VOLPOWERVOL–
MTX.COM 3REMOTE OPERATION1. Play/Pause - The Play/Pause button gives you the ability to play or to pause the current track with a single press. Holding the Play/Power button for 2 seconds will turn the unit On if currently Off or Off if currently powered On. The unit will beep to indicate when power is turned Off. Note: a. The unit will stay on indenitely as long as a Bluetooth device is actively paired to the Bluetooth remote control. b. The unit will turn Off after 5 minutes when there is no active Bluetooth device connection. c. The Play/Pause button will illuminate when the unit is powered On. d. The Play/Pause button will blink when the music track is paused.2. Track Forward and Track Back - The unit will switch audio tracks being played by pressing the track forward and track back buttons. Pressing and holding these buttons for 2 seconds will fast forward or rewind the audio track that is being played.3. Volume Up and Volume Down - These buttons will turn up or turn down the output of the Bluetooth unit so any external connected amplier output will go up or down accordingly. When the unit has reached the minimum or maximum output level, the unit will beep to indicate that no further adjustment is possible.4. Bluetooth Auto-Pair Mode a. Turn the unit On. b. Search for MTX REMOTE from your device’s Bluetooth menu c. Select Pair.
MTX.COM4This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, this is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment to an outlet on a different circuit than the one to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Changes or modications not expressly approved by Mitek Corporation could void the user’s authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation© 2017 Mitek Corporation. All rights reserved. MTX is a trademark of Mitek Corporation. Designed and Engineered in the U.S.A.Due to continual product development, all specications are subject to change without notice. MTX Audio, 4545 East Baseline Rd. Phoenix, AZ 85042 U.S.A. 1-800-225-5689This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada . Son fonctionnement est soumis aux deux conditions suivantes :( 1 ) Ce dispositif ne peut causer d'interférences ; et( 2 ) Ce dispositif doit accepter toute interférence , y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil.

Navigation menu