Mitel 8528 Users Manual Telephone User Guide
Mitel-8528-Users-Manual-120637 mitel-8528-users-manual-120637
8528 to the manual 88f4a50c-e288-4615-aafe-8b33a2ed22e0
2015-01-21
: Mitel Mitel-8528-Users-Manual-350443 mitel-8528-users-manual-350443 mitel pdf
Open the PDF directly: View PDF 
.
Page Count: 92
| Download | |
| Open PDF In Browser | View PDF |
MITEL 5000 Communications Platform (CP) 8528 Telephone Title space availble here. Title space availble here. Title space availble here. Title space availble here. Title space availble here. (Frutiger 57Cn 16pt) User Guide Mitel 8528 Telephone Quick Reference Guide This guide provides information for frequently used features. For more information about these and other features, refer to the user guide. For voice mail information, refer to the voice mail user guide for your system. Feature Buttons Commonly Used Feature Codes Contact your system administrator for more information about system features. Feature Code ACD Agent – Log In/Out 328 Most of the following feature codes work when your telephone is idle. However, if you are on an active call or if the telephone is off-hook, you may need to press (Special) to activate the feature before you enter the feature code. Automatic IC Call Access – On/Off 361 Automatic Trunk Call Access – On/Off 360 Background Music – On/Off 313 Call Forward – All Calls 355 If you make a mistake when entering numbers or characters, you can press (Hold) to move the cursor to the left and delete the characters entered, or you can press * to cancel the feature. Call Logging 333 Button Action (Up) Provides volume control. (Down) Scrolls through feature options. Conference Default Station 5 394 Directory 307 Display Time And Date 300 Do-Not-Disturb – On/Off 372 Dynamic Extension Express – On/Off 364 Dynamic Extension Express Handoff 388 Activates Handsfree Mode. Handsfree – On/Off 319 Activates features. Headset – On/Off 317 (Mute) Mutes the microphone during a call. Hold – Individual 336 Hold – System 335 (Directory) Activates the contact and feature DIrectory. Hot Desk On/Off 348 Hunt Group – Remove/Replace 324 Activates features while on a call. Message – Cancel Left Message 366 The (Special) button does not cancel features. To cancel features, press the Star button (*). Message – Delete Message 368 Message – Leave Message 367 (Speaker) (Special) (Redial) (Hold) Calls the last external number dialed. You cannot redial internal numbers. Places the current call on hold. Left/Backspace when entering dialpad characters. (Transfer) Transfers the current call. Right/Forward when entering dialpad characters. (Message) Connects to voice mailbox and notifies when you have messages. Toggles between Alpha Mode and Numeric Mode when entering dialpad characters. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Message – View Messages Menu 365 Microphone Mute – On/Off 314 Page Receive – On/Off 325 Program Buttons 397 Program Station Passcode 392 Programmable Buttons – Default 395 Queue (Callback) Request Record-A-Call Reverse Transfer (Call Pick-Up) Ring Tone Selection 6 385 4 398 Station Speed Dial 382 Station Speed Dial – Programming 383 Switch Keymap 399 System Forward – On/Off 354 System Speed Dial 381 View Button Assignments 396 Page iii Answering Calls Lift the handset, or press (Speaker) to answer a call while using a headset or to answer a call in Handsfree Mode. Placing Emergency Calls Dial the emergency number (911 U.S. or 999/112 Europe). The system immediately places the emergency call as soon as you dial the number, even if you do not select an outside line. Placing Internal (Intercom) Calls With or without the handset lifted, dial the extension number. If you enter incorrect digits, you can press (Hold) to move the cursor backward, deleting the last digits entered. If you are using Handsfree Mode, listen for the double tone, and then begin to speak. Placing External Calls Press the Outgoing button, an unlit Call button, or enter the Outgoing Call access code (8 is the default code), and then dial the number. Redialing External Numbers With or without the handset lifted, press the (Redial). The system automatically selects a line and dials the number. Transferring Calls to Other Extensions 1. While on the call, press (Transfer), and then enter the extension number. 2. Do one of the following: Wait for an answer, announce the call, and then hang up. If the extension is unavailable, press the flashing IC or Call button to return to the caller. Hang up to transfer the call and disconnect the call from your telephone. Forwarding Calls 1. Press the Fwd button, and then enter the feature code, if applicable. ENTER FORWARD DEST appears. 2. Enter the extension number, or press the Outgoing button or enter the Outgoing Call access code (8 is the default code), and then dial the phone number. Page iv Placing Ad Hoc Conference Calls 1. While on the first call, press the Conf button to place the call on hold. CALL NEXT PARTY TO CNF appears. 2. Place a call to the next conference party. For external calls, press the Outgoing button or enter the Outgoing Call access code (8 is the default code), and then dial the number. 3. After the party answers, announce the conference, and then press the Conf button to place the call on hold. If necessary, repeat this step to add the remaining conference party. 4. Press the Conf button again to start the conference. CNF IN PROGRESS appears. Viewing and Responding to Messages 1. With the handset on-hook, press (Message) Messages are displayed as first in/first out. If there is more than one message, you can repeatedly press (Message) to scroll through the messages. 2. When the desired message is displayed, press #, or lift the handset for privacy, and then press # to respond. (If your handset is off-hook and you press (Message), you automatically place a call to the party or message center who left the message.) Using Do-Not-Disturb 1. Press the DND button, and then do one of the following: Press (Up) or (Down) to scroll through the messages. Enter the two-digit number for the DND message. 2. After selecting the message, enter the additional text for the DND description, if applicable. 3. Press (Speaker) lift and replace the handset. Placing a Page Announcement 1. Press 7. 2. Enter the page-zone number (0 to 9). 3. After the tone, make your announcement, and then hang up. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Notice This guide is released by Mitel Networks Corporation and provides information necessary to use the Mitel 8528 Telephone. The guide contents, which reflect current Mitel standards, are subject to revision or change without notice. Some features or applications mentioned may require a future release and are not available in the initial release. Future product features and applications are subject to availability and cost. Some features or applications may require additional hardware, software, or system administrator assistance. For sales, service, or technical support, contact your local authorized provider: Enter provider information above. If you do not know the contact information for your local provider, use the “Partners” link at the top of the Mitel home page (www.mitel.com) to find a location near you. If you have any questions or comments regarding this user guide or other technical documentation, contact the Technical Publications Department (USA) at: tech_pubs@mitel.com Mitel® is a registered trademark of Mitel Networks Corporation. All other trademarks mentioned in this document are the property of their respective owners, including Mitel Networks Corporation. All rights reserved. © 2009–2011 Mitel Networks Corporation Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from Mitel. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page v Important Safety Instructions and Precautions Remember the following safety guidelines when using the telephone. Programming Emergency Numbers Make sure to do the following when programming emergency numbers and/or making test calls to emergency numbers: Remain on the line and briefly explain to the dispatcher the reason for the call. Perform tests during off-peak hours such as early morning or late evenings. Safety Notices The following notices may appear on the product or in the technical documentation. Notice Description Caution indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury and/or damage to the equipment or property. Warning indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Danger indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. The exclamation point within an equilateral triangle indicates that important operating and maintenance (servicing) instructions are included in the literature accompanying the product. Maintenance and Repair There are no user serviceable parts inside the telephones. For repairs, return the telephone to an authorized Mitel provider. NOTE Page vi Changes or modifications not expressly approved by Mitel may void the user’s right to operate the equipment. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Power Requirements CAUTION Telephone Damage Hazard. To avoid damaging the telephone or Programmable Key Module Interface Module (PKM IM), make sure the PKM IM is connected to the proper power supply before powering on. Contact your system administrator for more information. When a PKM IM is attached to the telephone, the telephone requires the Mitel Universal 24 VDC power adapter, part number 50005300. If necessary, contact your system administrator for assistance before connecting the PKM IM to the centralized power source. Make sure the PKM IM is plugged into an uninterruptible power supply (UPS). If the PKM IM is plugged into the UPS and the power fails, it should remain powered on for about 10 minutes. If the PKM IM is not plugged into a UPS and the power fails, the current call is dropped and you will not be able to use the telephone until the power is restored. Software Updates CAUTION Telephone Damage Hazard. Do not use your telephone or disconnect it while it is updating software. The telephone may require occasional software updates when new versions are available. The telephone is configured to download the updates automatically. Contact your system administrator for more information. Product Disposal Instructions This symbol indicates that the product is classified as electrical or electronic equipment and should not be disposed of with other commercial or household waste at the end of its working life. For appropriate disposal and recycling instructions, contact your local Mitel provider. The Waste of Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC) was established by the European Union to minimize negative impact on the environment, control hazardous substances, and curtail landfill expansion by using the best available recovery and recycling techniques. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page vii Telephone Usage This equipment is not for connection to the telephone network or public coin telephone service. It is only for use when connected to Mitel systems. WARNING When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Avoid using an telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. Do not use the telephone to report a gas leak in the vicinity of a leak. Do not connect directly to the Public Switched Telephone Network (PSTN). Any connection of this telephone to an off premise application, an out of plant application, any other exposed plant application, or to any equipment other than the intended application may result in a safety hazard, and/or defective operation, and/or equipment damage. “Exposed plant” means where any portion of the circuit is subject to accidental contact with electric lighting or power conductors operating at a voltage exceeding 300 volts between conductors or is subject to lightning strikes. The socket outlet, if used, shall be located near the equipment and shall be easily located by the user. Use only Mitel approved power adaptors. The handset supplied with the telephone is not certified for use with any other telephone. Use of the handset with any other telephone may have the potential to cause hearing loss in the event of a lighting strike on the outside plant wiring. Page viii Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Notice to Canadian Customers The Class B digital apparatus complies with Canadian ICES-003. Notice to U.S. Customers This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Notice to European Customers We, Mitel Networks LTD. Of, Mitel Castlegate Business Park Portskewett Caldicot NP26 5YR UK Declare that for the hereinafter mentioned product the presumption of conformity with the applicable essential requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT (RTTE DIRECTIVE) AND OF THE COUNCIL is given. Mitel Telephone: 8528 Any unauthorized modification of the product voids this Declaration. For a copy of the original signed Declaration of Conformity (in full conformance with EN45014), please contact the Regulatory Approvals Manager at the above address. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page ix Contents Contents Getting Started 1 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 About Your Telephone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Telephone Feature Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ring/Message Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Feature Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dialpad Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Programmable Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Software Updates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3 3 3 3 4 4 5 5 Telephone Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Comfort and Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Headset Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Personalizing Your Telephone 9 Adjusting the Viewing Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Installing Designation Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Changing Volume Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Changing the Ring Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Adjusting the Display Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Listening to Background Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Changing the Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Using the Dialpad Buttons to Enter Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Using Programmable Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Default Access Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Outside Line Access Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Extension Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Default Feature Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Viewing Button Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Resetting Programmable Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Resetting the Telephone to the Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Switching Keymaps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Activating Door Relay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page xi Contents Answering and Placing Calls 23 Answering Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Answering Waiting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Using Automatic Call Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Redirecting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Using Automatic Trunk Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Placing Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Placing Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Placing Internal Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Requesting a Callback (Queuing the Telephone) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Using Camp-on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Placing External Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Redialing a Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Using Speed Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Using System Speed Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Using Station Speed Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Storing Station Speed-Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dialing Station Speed-Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Deleting Station Speed-Dial Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Assigning Speed-Dial Numbers to Programmable Buttons . . . . . . . . . . . . . . . . . . . . . . . . 27 27 27 28 28 Using the Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Using Account Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Call Features 31 Using Handsfree Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Using Ring Intercom Always . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Using Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Placing Calls On Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Entering a Hookflash. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Transferring Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Transferring Calls to Other Extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Transferring Calls to External Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Using Reverse Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Viewing Your System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Viewing Caller ID Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Forwarding Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Manual Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 System Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Page xii Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Contents Using Dynamic Extension Express . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Using the Handoff - Push/Pull Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Receiving Message Waiting Indications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Placing Ad Hoc Conference Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Adding a Conference Party . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Transferring a Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Dropping Out of a Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Ending a Conference and Placing all Parties on Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Using Meet-Me Conferencing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Conference Assistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Access Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Setting Up a Meet-Me Conference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Joining a Meet-Me Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Dropping Out of a Meet-Me Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Putting a Meet-Me Conference on Hold. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Transferring a Meet-Me Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Using Record-A-Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Using Group Listen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Using Call Logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Using Secondary Extension Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Using Hot Desking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Using Configuration Assistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Changing Your Station Passcode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Accessing Configuration Assistant. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Changing the Dynamic Extension Express Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Changing the DND Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Changing the Manual Call Forwarding Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Managing Meet-Me Conferencing Access Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Using Remote Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Changing the Dynamic Extension Express Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Changing the DND Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Changing the Manual Call Forwarding Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Changing the Station Passcode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page xiii Contents Messages 55 Leaving Messages at Other Extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Viewing and Responding to Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Canceling Messages Left at Other Extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Deleting Waiting Inter-Station Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Using Do-Not-Disturb (DND) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Using Reminder Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Paging Other System Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Placing a Page Announcement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Enabling or Disabling the Page Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Hunt Groups 61 Logging in to ACD Hunt Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Logging out of ACD Hunt Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Stopping the ACD Hunt Group Wrap-up Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Other Hunt Group Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Requesting Agent Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Diverting Hunt Group Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Hunt Group Supervisor Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Accepting or Rejecting Agent Help Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Monitoring Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Stealing Hunt Group Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Using Barge-In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Troubleshooting 67 Contact Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Index Page xiv 71 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Getting Started Getting Started Welcome The instructions in this guide are for using the Mitel 8528 Telephone on the Mitel 5000 Communications Platform (CP). The Quick Reference Guide located at the beginning of this guide is an overview of frequently used features. Your telephone should be powered on and ready to use. If the display is blank, or if the display name, extension number, or time or date are incorrect, contact your system administrator for assistance. Because a variety of voice mail products work with the 5000 CP, this guide does not include voice mail instructions. For voice mail instructions, refer to the voice mail user guide for your system. For example, refer to the Enterprise Messaging, Unified Voice Messaging, and Embedded Voice Mail Card User Guide, part number 835.3205, or the Mitel NuPoint Unified Messaging User Guide on the Mitel Web site (http://edocs.mitel.com). Contact your system administrator for more information about your voice mail system. NOTE Because many telephone features can be programmed to perform various tasks, some features may work differently than the descriptions in this guide. Contact your system administrator for more information. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 1 Getting Started About Your Telephone Your telephone is equipped with a two-line display, a hearing aid-compatible handset, a Message Indicator lamp, an internal speaker and microphone, and three types of buttons. The 8528 Telephone is shown here. See “Telephone Feature Descriptions” on page 3 for more information about the telephone features. 2 11 3 4 71 5 6 1 – Handset 5 – Dialpad buttons 2 – Display 6 – Programmable buttons 3 – Ring/Message Indicator 7 – External speaker 4 – Feature buttons Page 2 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Getting Started Telephone Feature Descriptions The following sections describe default configurations. Your telephone may be programmed differently. Contact your system administrator for more information. See “About Your Telephone” on page 2 for telephone feature locations. Handset The handset provided with this equipment is hearing aid compatible (HAC). If you are using a headset or if you are in Handsfree Mode, you do not need to use the handset. See “Headset Instructions” on page 7 and “Using Handsfree Mode” on page 31 for more information. Display The display provides a two-line, 16-character viewing area for using features and identifying callers. When idle, the display shows user information and the time and date. Ring/Message Indicator The Ring/Message Indicator flashes or stays lit to indicate call, message, and feature activity. For more information about messaging features, see “Messages” on page 55. Ring/Message Indicator signals are described in the following table. Indicator Signals Description Rapidly flashing You have an incoming call. Slowly flashing You have a waiting message or callback message. On You are on a call or using a feature. Off Your telephone is idle. Speaker The speaker provides audio for handsfree calls and background music. See “Using Handsfree Mode” on page 31 for information about handsfree calls. See “Listening to Background Music” on page 12 for more information about background music. NOTE The 8528 Telephone uses enhanced speakerphone (both parties cannot talk at the same time). Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 3 Getting Started Feature Buttons Feature buttons provide quick access to commonly used features. See the following table for descriptions. Button Action (Up) (Down) Provides volume control for the ringer, handset, and speaker. Scrolls through feature options. (Speaker) Activates Handsfree Mode (speakerphone). See “Using Handsfree Mode” on page 31. Activates features. (Mute) Temporarily turns off your microphone during a call. (Directory) Activates the contact and feature Directory. See “Using the Directory” on page 29. (Special) Activates features while on a call. The (Special) button does not cancel features. To cancel features, press the Star button (*). Redial (Hold) Calls the last external number dialed. You cannot redial internal numbers. Places the current call on hold. Left/backspace when entering dialpad characters. See “Using the Dialpad Buttons to Enter Characters” on page 13. (Transfer) Transfers the current call. Right/forward when entering dialpad characters. See “Using the Dialpad Buttons to Enter Characters” on page 13. (Message) Connects to your voice mailbox and flashes to notify you of waiting messages. Toggles between Alpha Mode and Numeric Mode when entering dialpad characters. Dialpad Buttons Use the dialpad buttons to dial phone numbers, enter feature codes, and to enter characters when using features that require text input. Page 4 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Getting Started Programmable Buttons Your telephone has 16 programmable buttons.The top seven buttons on the telephone are programmed by the system administrator and cannot be reprogrammed. However, you can program the remaining buttons for quick access to features or speed-dial entries. See “Using Programmable Buttons” on page 16 for instructions. Button Action Call 1 Selects an outside line or answers a call. Call 2 Selects an outside line or answers a call. Intercom Answers an intercom (internal) call. Do-Not-Disturb Turns Do-Not-Disturb (DND) mode on or off. Conference Places a conference call. Forward Forwards the call to the specified number. Outgoing Selects an outgoing line for external calls. Software Updates When the telephone is plugged in for the first time or after a system upgrade, it may update its firmware. The upgrade process can take up to 13 minutes. During the upgrade, all lamps flash on and off, and the display shows that an upgrade is in process. Do not unplug the telephone during the upgrade. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 5 Getting Started Telephone Signals Your telephone has several audio and visual signals to indicate feature activity. The following are a few helpful tips: Lit or blinking buttons indicate call or feature activity. All telephone button lamps illuminate at the same time for a few seconds when the telephone is reset or powered on. The following actions may cause an error tone: o Pressing an invalid button combination. o Selecting a restricted feature. o Dialing a restricted or invalid number. o Dialing too slowly between digits. o Waiting too long before performing the next step. To correct an error tone, hang up and try again. Many features “time-out” if you wait too long before performing the next step. If this happens, you must start over. “Off-hook” means the handset is lifted. “On-hook” means the handset is in the cradle. If your telephone does not have a lamp under the speaker button, the large message indicator lamp on the top right of the telephone indicates that the speakerphone is in use. Comfort and Safety Tips Observe the following comfort and safety tips when using the telephone: Do not cradle the handset: Prolonged use of the handset can lead to neck, shoulder, or back discomfort, especially if you cradle the handset between your neck and shoulder. If you frequently use the telephone, you might find a headset more comfortable. See “Headset Instructions” on page 7. Adjust the viewing angle: The built-in stand tilts to give you a better view of the buttons. See “Adjusting the Viewing Angle” on page 9. Protect your hearing: Because prolonged exposure to loud sounds can contribute to hearing loss, keep the volume at a moderate level. You can adjust the volume levels of the handset receiver or headset. See “Changing Volume Levels” on page 11. Page 6 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Getting Started Headset Instructions Your telephone is designed to work with a headset that has a 4-pin, RJ-type connector. User satisfaction for any particular headset can be quite subjective, so Mitel recommends that you try before buying so you are more likely to be satisfied with the fit, quality, and cost of the solution. This recommendation includes all wired and wireless headsets, including the integrated Plantronics® CS50 Headset. In addition, Mitel recommends using a headset with a built-in microphone to avoid audio feedback (echo). Wireless Considerations: To operate, the Plantronics CS50 Wireless Headset must remain within the system’s range operating limit from the base. Refer to the Plantronics CS50 Wireless Headset System User Guide for more details. When using a headset, press (Speaker) to connect to or disconnect from calls. The Headset icon appears when the headset is in use. You cannot use the handset or speakerphone when the telephone is in Headset Mode. Disconnecting the headset automatically enables the handset. The headset must be hearing aid compatible (HAC). NOTES If your headset has a power-saver mode, make sure the system administrator has enabled the “Headset Connect Tone” feature. If this is not enabled, you may miss the first few seconds of an incoming call. To connect and activate the headset: 1. Insert the headset jack into the Headset port 2. Dial 317 (Headset on/off). HEADSET MODE ON appears. NOTE located on the back of the telephone. Because Headset Mode disables the handset and speakerphone, you must turn off Headset Mode before you can use the handset or speakerphone. To turn off Headset Mode and activate the handset and speakerphone: Dial 317 (Headset on/off). HEADSET MODE OFF appears. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 7 Personalizing Your Telephone Personalizing Your Telephone This chapter describes features you can use to personalize your telephone. Adjusting the Viewing Angle You can tilt the telephone stand for a better view of the buttons and display. Press tabs on both sides to release and detach unit. To adjust the viewing angle: 1. Turn the telephone so it faces away from you. 2. Hold the base firmly, and then press the tabs on the sides of the stand to release and detach the base unit. 3. Hinge the hooks on the base unit into the notches on the back of the telephone, and then snap into place as follows: For a high-angle mount, hinge the two lower hooks into the bottom set of notches, and then snap the two upper hooks into the middle set of notches. For a low-angle mount, hinge the two lower hooks into the middle set of notches, and then snap the two upper hooks into the top set of notches. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 9 Personalizing Your Telephone Installing Designation Cards If you program buttons on your telephone (see page 16), you can install a new paper designation card with the revised button labels. (Paper designation cards are provided by your system administrator.) You can usually slide the paper designation card out and replace it without removing the lens (if necessary, see the following instructions to remove the lens). You can remove the lens and install a fixed Mylar® designation card, which has labels for the programmable buttons under the display. Contact your system administrator for the Mylar designation card. To remove the lens and install the fixed Mylar designation card: 1. Remove the screw that holds the option module on the back of the telephone. Keep the screw in a safe place—you must use it in step 6. 2. Lift the lower edge of the option module until you feel the inner tabs release, and then gently lift the upper edge of the module. (To avoid damaging the module or the lens, always lift the lower edge of the module first.) 3. Remove the lens by lifting the upper edge, and then sliding the lower edge down. 4. Place the fixed Mylar designation card on the face of the telephone. 5. Slide the lens tabs into the underside of the telephone. 6. Snap the lens tightly into place by applying pressure to both the middle and top of the lens. Secure the option module using the screw from step 1. Fixed Mylar designation card Lens Option module Page 10 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Personalizing Your Telephone Changing Volume Levels You can change the following volume levels: Ringer (alerting tone) Handset Headset Background music External speaker Turning the external speaker volume down to the lowest levels may prevent you from hearing the feature “warning tones” that notify you when errors occur (for example, when you enter an incorrect feature code). NOTE You must be using the feature to change the volume level. For example, if you want to change handset volume level, you must be using the handset. However, you can adjust the ringer (alerting tone) volume level when the telephone is idle. To change a volume level: While using the feature, press decrease the volume. (Up) to increase the volume or press (Down) to To save the volume level: Press (Up) and (Down) simultaneously. Handset volume 11 cannot be saved. Changing the Ring Tone You can select one of nine different ring tones. To change the ring tone: 1. With the handset on-hook, dial 398. 2. Do one of the following to listen to (or turn off) ring tones: Press 0 to turn the ringer off. Press (Up) or (Down) or 1 to 9 to listen to ring tones. 3. Press (Speaker), #, or lift and replace the handset to select the ring tone. Adjusting the Display Contrast You can adjust the display Contrast setting. To adjust the Contrast setting: 1. While the handset is on-hook, dial 303. 2. Do one of the following to adjust the contrast: Press (Up) or (Down) to adjust the contrast. Press a number on the dialpad (1 = lightest, 8 = darkest) that corresponds to your desired contrast level. 3. To save the setting, press # or Mitel® 8528 Telephone User Guide – Issue 3, February 2011 (Speaker). Page 11 Personalizing Your Telephone Listening to Background Music If your system is equipped with a music source, you can listen to background music or system audio (for example, organizational conference calls) through the external speaker. To turn on or turn off background music: Dial 313 (on/off). BACKGROUND MUSIC ON (or OFF) appears. Changing the Language Your system administrator can select two of the following languages as the primary and secondary languages to display text:1 American English British English Canadian French Mexican Spanish Japanese The language choices appearing on your display are controlled by system programming. For example, if your system administrator programmed your telephone with American English as the primary language, American English is used for display text. You can change the language by selecting the secondary language. Contact your system administrator for more information. To change the language: Dial 301 to select either the primary or secondary language. The display shows text in the selected language. 1. Page 12 This feature may or may not be enabled for your system. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Personalizing Your Telephone Using the Dialpad Buttons to Enter Characters You can use the dialpad buttons to enter text or numbers for features such as Do-Not-Disturb (see page 69) and Station Speed Dial (see page 38). The following are guidelines when entering dialpad characters: Press (Message) to switch from Alpha Mode to Numeric Mode. The button stays lit in Alpha Mode and is off in Numeric Mode. Press (Hold) to move the cursor to the left and delete characters. Press (Transfer) to move the cursor to the right. (Message) In Numeric Mode, press # for a hyphen (-). In Numeric Mode, press * for a colon (:). Press #, (Speaker), or lift and replace the handset to save entries. To use the dialpad to enter characters: Press the dialpad buttons as shown in the following table. Dialpad Characters — American English and British English Number of Times Dialpad Button is Pressed Button 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 : - / , . ; ( ) & + * ! ? # 1 2 A B C 2 a b c 3 D E F 3 d e f 4 G H I 4 g h i 5 J K L 5 j k l 6 M N O 6 m n o 7 P Q R S 7 p q r s 8 T U V 8 t u v 9 W X Y Z 9 w x y z 0 0 For example, to enter May 31, you could use the following sequence: 1. In Alpha Mode ( [Message] button is lit), press 6 once to enter an “M.” 2. Press 2 once to enter an “A.” 3. Press 9 three times to enter a “Y.” 4. Press 5. Press (Message) to switch to Numeric Mode. (Transfer) to enter a space. 6. Press 3. 7. Press 1. 8. Press (Speaker), #, or lift the handset to save the entry. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 13 Personalizing Your Telephone The following tables show the dialpad characters for the Canadian French, Mexican Spanish, and Japanese languages. Dialpad Characters — Canadian French Number of Times Dialpad Button is Pressed Button 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 : - / , . ; ( ) & + * ! ? # 1 2 A B C 2 A b c À Â Æ Ç à â æ ç 3 D E F 3 D e f È É Ê Ë è é ê ë 4 G H I 4 G h i Î Ï î ï 5 J K L 5 J k l 6 M N O 6 M n o Ô Œ ó œ 7 P Q R S 7 p q r s 8 T U V 8 T u v Ù Û Ü ù û Ü 9 W X Y Z 9 w x y z Ÿ Ÿ 0 « » 0 Dialpad Characters — Mexican Spanish Number of Times Dialpad Button is Pressed Button 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 : - / , . ; ( ) & + * ! ? # 1 2 A B C 2 A b c Á Á 3 D E F 3 D e f É é 4 G H I 4 G h i Í Í 5 J K L 5 J k l 6 M N O 6 M n o Ñ Ó ñ ó 7 P Q R S 7 p q r s 8 T U V 8 T u v Ú Ü ú ü 9 W X Y Z 9 w x y z 0 ¡ ¿ ª º 0 Page 14 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Personalizing Your Telephone Dialpad Characters — Japanese (Katakana) Number of Times Dialpad Button is Pressed Button 1 2 3 4 5 6 7 1 A I U E O a 1 2 KA KI KU KE KO i 2 3 SA SHI SU SE SO u 3 4 TA CHI TSU TE TO e 4 5 NA NI NU NE NO o 5 6 HA HI FU HE HO tsu 6 7 MA MI MU ME MO ya 7 8 YA YU YO yu 8 9 RA RI RU RE RO yo 9 0 WA WO N pa ba lg 0 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 15 Personalizing Your Telephone Using Programmable Buttons For quick access, you can assign feature codes, extensions, speed-dial numbers, trunks, or other resources to your programmable buttons. You can then press the programmed buttons to activate features or place calls. See “Default Access Codes” and “Default Feature Codes” on page 17 for code lists. You cannot reprogram the default button assignments. See “Programmable Buttons” on page 5. To program a button: 1. With the handset on-hook, dial 397. 2. Press the button that you want to program. If the button is: not programmed, UNDEFINED KEY appears. programmed, the feature or extension programmed for the button appears. not programmable, NON-PROGRAMMABLE KEY appears. 3. Enter the feature code, extension number, station speed-dial number, or system speeddial number to be assigned to the button. To assign speed-dial numbers to programmable buttons, see “Assigning Speed-Dial Numbers to Programmable Buttons” on page 28 NOTE Before or after assigning the speed-dial number to a programmable button, make sure the speed-dial number has either a Station Speed Dial bin or System Speed Dial location assigned to it. For System Speed Dial numbers, numbers are pre-assigned to the System Speed Dial locations (000 to 999 or 0000 to 4999) by your system administrator. Therefore, you just need to choose a System Speed Dial location that you want to use (see “Using System Speed Dial” on page 27 for details). For Station Speed Dial numbers, you must manually store numbers in the Station Speed Dial bins (0 to 9). See “Storing Station Speed-Dial Numbers” on page 27. After you program a button, you can: Press the button to place a call to the assigned extension. Press the button to access a system feature. Press the button and then hang up to transfer a call to the assigned extension. If the call is transferred to voice mail you hear repeating double tones. Visually monitor the call activity of the assigned extension if the button you assign has a lamp. The following table describes the lamp signals and the indicated call activity for a Programmable Key Module (PKM) button (station speed-dials do not show status). Lamp Signals Description Continuously Lit The extension is busy or off-hook. Slowly flashing The extension is in Do-Not-Disturb (DND). Quickly flashing The extension has a call ringing in. Continuously flashing The extension is causing a “Station Off-Hook” system alarm. Additional Programmable Buttons You can also use the Programmable Key Modules (PKM) to add additional programmable buttons to your telephone. You can program buttons the same way as those on the associated telephone as described earlier in this section. Contact your system administrator for details. Page 16 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Personalizing Your Telephone Default Access Codes The following are default system access codes. If your system uses different codes, record the codes in the “New Code” column for reference. Outside Line Access Codes Code Type Emergency Call Code New Code 911 (999/112 Europe) Outgoing Call (Default) 8 Select Line Group 1 to 208 92001 to 92208 Automatic Route Selection 92000 Extension Numbers Code Type Attendant Code New Code 0 Telephone Extensions 1000 to 1999 Hunt Groups 2000 to 2299 Default Feature Codes The following table lists default feature codes. If your system administrator changes any of the default codes, you can record the new codes in the “New Code” column for reference. NOTE Most of the following feature codes work when your telephone is idle. However, if you are on an active call or if the telephone is off-hook, you may need to press (Special) before you enter the feature code to activate the feature. To delete the characters entered: Press (Hold) to move the cursor to the left and delete the characters entered. To cancel the feature: Press *. Feature Page Code Account Code – Follow Calls 30 391 Account Code – Optional 30 390 ACD Agent – Log In 61 326 ACD Agent – Log In/Out 61 328 ACD Agent – Log Out 61 327 ACD Agent – Wrap-up Terminate 62 329 Activate Door Relay 21 332 Agent Help – Reject 63 376 Agent Help – Request 63 375 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 New Code Page 17 Personalizing Your Telephone Feature Page 18 Page Code Answer Ringing Call 23 351 Automatic IC Call Access – On/Off 23 361 Automatic Trunk Call Access – On/Off 23 360 Automatic Trunk Answer 24 350 Background Music – On/Off 12 313 Barge-In 65 386 Call Forward – All Calls 35 355 Call Forward – If Busy 35 357 Call Forward – If No Answer 35 356 Call Forward – No Answer/Busy 35 358 Call Logging 44 333 Change Language 12 301 Conference 39 5 Default Station 20 394 Directory 29 307 Display Contrast Control 11 303 Display Time And Date 34 300 Do-Not-Disturb 57 370 Do-Not-Disturb – Cancel 57 371 Do-Not-Disturb – On/Off 57 372 Do-Not-Disturb – Override 57 373 Dynamic Extension Express On 36 363 Dynamic Extension Express Off 36 362 Dynamic Extension Express On/Off 36 364 Dynamic Extension Express Handoff 36 388 Group Listen 43 312 Handsfree – On/Off 31 319 Headset – Off 7 316 Headset – On 7 315 Headset – On/Off 7 317 Hold – Individual 32 336 Hold – System 32 335 Hookflash (Recall in Europe) 32 330 Hot Desk On/Off 46 348 Hunt Group – Remove 63 322 Hunt Group – Remove/Replace 63 324 Hunt Group – Replace 63 323 New Code Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Personalizing Your Telephone Feature Page Code Message – Cancel Left Message 56 366 Message – Delete Message 56 368 Message – Leave Inter-station Message 55 367 Message – View Messages 56 365 Microphone Mute – On/Off 31 314 Page 59 7 Page Receive – On/Off 59 325 Program Buttons 16 397 Program Station Passcode 47 392 Programmable Buttons – Return to Default 20 395 Queue (Callback) Request 25 6 Record-A-Call 43 385 Redial 26 380 Redirect Call 24 331 Reminder Message 57 305 Reminder Message – Cancel 57 306 Remote Programming 47 359 Reverse Transfer (Call Pick-Up) 33 4 Ring Intercom Always – On/Off 31 377 Ring Tone Selection 11 398 Station Monitor 64 321 Station Speed Dial 27 382 Station Speed Dial – Programming 27 383 Steal Call 64 387 System Forward – Off 35 353 System Forward – On 35 352 System Forward – On/Off 35 354 System Speed Dial 27 381 Switch Keymap 20 399 Transfer To Hold 33 346 Transfer To Ring 33 345 View Programmable Button Assignments 20 396 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 New Code Page 19 Personalizing Your Telephone Viewing Button Assignments You can view programmable button (key) feature assignments. To view button assignments: 1. With the handset on-hook, dial 396. PRESS THE KEY TO REVIEW appears. 2. Press any of the feature buttons to display the assignment. 3. Press # or (Speaker) to exit. Resetting Programmable Buttons You can reset all buttons (keys) that you have programmed to the default assignments. Resetting the programmable buttons does not reset button assignments programmed by the system administrator. To reset the feature buttons to the default values: With the handset on-hook, dial 395. FEATURE KEYS DEFAULTED appears. Resetting the Telephone to the Default Settings Resetting the telephone to the default settings does the following: Returns all volume settings to the default levels. See “Changing Volume Levels” on page 11. Cancels Background Music. See “Listening to Background Music” on page 12. Cancels Callback (queue) requests. See “Requesting a Callback (Queuing the Telephone)” on page 25. Restores Handsfree Mode. “Using Handsfree Mode” on page 31. Cancels Manual Call Forwarding. See “Manual Call Forwarding” on page 35. Cancels System Forwarding. See “System Forwarding” on page 35. Cancels Do-Not-Disturb (DND). See “Using Do-Not-Disturb (DND)” on page 57. Restores Page settings. See “Paging Other System Users” on page 59. Resets hunt group calls. See “Hunt Groups” on page 61. To reset your telephone to the default settings: Dial 394. STATION DEFAULTED appears. Switching Keymaps Keymaps are the default button assignments on your telephone. Your system may have programmed an alternate keymap, allowing you to switch between keymap assignments. Contact your system administrator for more information. To switch between keymaps when your telephone is idle: With the handset on-hook, dial 399. The display shows either ALTERNATE (or) STANDARD KEYMAP IS ACTIVE. To switch between keymaps during a call: Press Page 20 (Special), and then dial 399. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Personalizing Your Telephone Activating Door Relay If the Activate Door Relay feature is enabled, you can unlock a door (i.e., “buzz” it open) through your telephone. You can enter the Activate Door Relay feature code while idle or while on a call. This allows you to activate the feature while talking to a communications device mounted at the door without first having to hang up. When activated while on a call, the feature will not affect the call in progress other than to show a short confirmation on the display. You can add the Activate Door Relay feature to a phone keymap button, just like any other station feature. To unlock a door: While idle or while on a call, dial 332. The door is unlocked. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 21 Answering and Placing Calls Answering and Placing Calls The following instructions describe how to answer and place internal and external calls and how to use related features. NOTE By default, internal (intercom) calls are assigned to the IC button, and external calls are assigned to the Call buttons. Answering Calls Your telephone may be preset to automatically answer incoming internal calls in Handsfree Mode. To disable Handsfree Mode, see “Using Handsfree Mode” on page 31. After disabling Handsfree Mode, you can use your handset or headset to answer incoming calls. To answer a call: Lift the handset, or press (Speaker) to answer a call while using a headset, or to answer a call in Handsfree Mode. See “Using Handsfree Mode” on page 31. If you are currently on a call, press the flashing IC or Call button to answer a waiting call. See “Answering Waiting Calls” below. Answering Waiting Calls If you receive a call while you are on another call, you hear a “call waiting” tone, the IC or Call button flashes, and the display shows the Caller ID information (if available). To answer a waiting call: Press the flashing IC or Call button. This action hangs up on the connected call and connects you to the waiting call. You can also place the first call on hold before you answer the waiting call. See “Placing Calls On Hold” on page 32. Using Automatic Call Access Automatic Call Access connects you to incoming internal or external calls when you pick up the handset or press (Speaker). When Automatic Call Access is turned off, you must press the flashing IC or Call button to answer incoming calls. To use Automatic Call Access for incoming IC calls: With the handset on-hook, dial 361 to turn on (or off). AUTO IC ACCESS ON (or OFF) appears. To use Automatic Call Access for incoming external (trunk) calls: With the handset on-hook, dial 360 to turn on or off. AUTO TRNK ACCESS ON (or OFF) appears. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 23 Answering and Placing Calls Redirecting Calls You can redirect calls to another extension or external number. To redirect calls: 1. While a call is ringing, dial 331. 2. Do one of the following: Dial the extension number, or press the Outgoing button or the Outgoing Call access code (the default code is 8), and then dial the external number. Enter the DND code. See “Using Do-Not-Disturb (DND)” on page 57. Using Automatic Trunk Answer You can use Automatic Trunk Answer to answer incoming external calls for other internal parties who are members of an “Answer Access” list. Your system administrator creates Answer Access lists. Contact your system administrator for Answer Access list extensions.1 Automatic Trunk Answer answers calls in the order they are received (that is, the first call received by any extension in the Answer Access list is the first one answered). To use Automatic Trunk Answer: 1. While an incoming external call is ringing at another Answer Access list extension, lift the handset or press (Speaker). 2. Dial 350 or press the flashing Trunkbutton. Placing Calls The following instructions describe how to place calls and related features. Placing Emergency Calls WARNING Contact your system administrator and your local Mitel provider for important information about dialing emergency services before using your telephone. When dialing an emergency number (911 U.S. or 999/112 Europe), you do not have to press the Outgoing button or enter the Outgoing Call access code (8 is the default code). The system automatically places emergency calls immediately after you dial the number, even if you do not select an outside line. 1. Page 24 This feature may or may not be enabled for your system. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Answering and Placing Calls Placing Internal Calls Internal calls are calls placed to other extensions in the system. Internal calls are assigned to the Intercom (IC) button on your telephone. Contact your system administrator for a list of extension numbers. To place an internal call: With or without the handset lifted, dial the extension number. If you enter incorrect digits, you can press (Hold) to move the cursor backward, deleting the last digits entered. If you are using Handsfree Mode, speak after you hear a double tone. If there is no answer or if the extension is busy, you can do the following: Request a callback (queue). See “Requesting a Callback (Queuing the Telephone)” below. Camp-on to the busy extension. See “Using Camp-on” below. Leave a message. See “Leaving Messages at Other Extensions” on page 55. Requesting a Callback (Queuing the Telephone) When you request a callback (queue the telephone), the system calls you when the extension is available and places a call to the telephone. To request a callback: If there is no answer or if the extension is busy, press (Special) followed by 6, and then hang up. QUEUE REGISTERED FOR appears. When the extension becomes available, your extension rings. To cancel the callback request: Press 6. QUEUE REQUEST CANCELED appears. Using Camp-on Camp-on keeps you connected to the called extension until it becomes available. You cannot use Camp-on if the called extension is in DND, or if the call is forwarded to voice mail. See “Using Do-Not-Disturb (DND)” on page 57. To use Camp-on: Stay on the line and wait for the extension to become available. Do not hang up. If Camp-on is enabled, you hear Music-on-Hold while you are waiting. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 25 Answering and Placing Calls Placing External Calls The following sections describe features used when placing external calls. To place an external call: 1. Press the Outgoing button, an unlit Call button, or enter the Outgoing Call access code (8 is the default code). 2. Dial the number. NOTES If you cannot place an external call because all outgoing lines are busy, you can request a callback, which prompts the system to contact you when a line becomes available. See “Requesting a Callback (Queuing the Telephone)” on page 25. If you are prompted for an account code (indicated by a single beep), you must enter an account code before you can place your call. See “Using Account Codes” on page 30. Depending on system configuration, you may also be able to use one of the following methods to select an outgoing line: Enter the Select Line Group feature code. The default codes are 92001 to 92208. Enter the Automatic Route Selection (ARS) feature code. The default code is 92000. Contact your system administrator for more information about using Select Line Group or ARS access codes. Redialing a Number You can quickly redial the last external number dialed. You cannot redial extension numbers. To use Redial: With or without the handset lifted, press selects a line and dials the number. Page 26 REDIAL. The system automatically Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Answering and Placing Calls Using Speed Dial You can use speed dial to quickly dial stored phone numbers. Speed-dial numbers are either stored in the system (System Speed Dial), or in your telephone (Station Speed Dial). Using System Speed Dial Your system administrator assigns Speed-Dial location numbers, which are available to anyone in the system. Contact your system administrator for more information. To view or dial System Speed-Dial numbers: 1. Dial 381. REVIEW SYS SPEED # appears. 2. Do one of the following: Press (Up) or (Down) to scroll through the speed-dial locations. Enter the speed-dial location (000 to 999 or 0000 to 4999). 3. Press # to dial the number. Using Station Speed Dial You can use Station Speed Dial to store phone numbers for your personal use. Other system users do not have access to your Station Speed-Dial numbers. Storing Station Speed-Dial Numbers You can store up to 10 Station Speed-Dial numbers. To store a Station Speed-Dial number: 1. With the handset on-hook, dial 383. PROGRAM STN SPD (0-9) OR SCROLL appears. 2. Do one of the following: Press (Up) or (Down) to scroll through the speed-dial bins. Enter the speed-dial bin (0 to 9). Press # to select the bin. 3. Enter the name of the speed-dial contact (up to 16 characters). For dialpad character descriptions, see ““Using the Dialpad Buttons to Enter Characters” on page 13” below. 4. Press # to save the name. 5. Enter the extension number or external number. If you are storing an external number, enter the Outgoing Call access code (default code is 8) before you enter the number. Do not use hyphens or colons in stored speed-dial numbers. 6. Press # to save the location. STN SPD BIN #UPDATED appears. Dialing Station Speed-Dial Numbers To dial a Station Speed-Dial number: Do one of the following: Dial 382, and then enter the Station Speed Dial bin (0 to 9). The system dials the number. Press (Up) or (Down) to scroll through the speed-dial bins, and then press # to select the bin and dial the number. NOTE You can also use a Station Speed Dial button assigned to the number you are dialing. See “Assigning Speed-Dial Numbers to Programmable Buttons” on page 28. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 27 Answering and Placing Calls Deleting Station Speed-Dial Entries To delete a Station Speed-Dial entry: 1. With the handset on-hook, dial 383. PROGRAM STN SPD (0-9) OR SCROLL appears. 2. Do one of the following: Press (Up) or (Down) to scroll through the speed-dial bins. Enter the speed-dial bin (0 to 9). 3. Press # to select the bin. 4. Press (Hold) repeatedly until the name is erased, and then press # to continue. 5. Press (Hold) repeatedly until the number is erased, and then press #. STN SPD BIN # UPDATED appears. Assigning Speed-Dial Numbers to Programmable Buttons You can assign Station or System Speed-Dial numbers to your programmable buttons. NOTE Before or after assigning the speed-dial number to a programmable button, make sure the speed-dial number has either a Station Speed Dial bin or System Speed Dial location assigned to it. For System Speed Dial numbers, numbers are preassigned to the System Speed Dial locations (000 to 999 or 0000 to 4999) by your system administrator. Therefore, you just need to choose a System Speed Dial location that you want to use (see “Using System Speed Dial” on page 27 for details). For Station Speed Dial numbers, you must manually store numbers in the Station Speed Dial bins (0 to 9). See “Storing Station Speed-Dial Numbers” on page 27. To program a Station Speed-Dial button: 1. With the handset on-hook, dial 397. PRESS THE BUTTON TO PROGRAM appears. 2. Press the feature button that you want to program as a speed-dial button. 3. Dial 382. 4. Do one of the following: Press (Up) or (Down) to scroll through the speed-dial bin. Enter the speed-dial bin (0 to 9). To program a System Speed-Dial button: 1. With the handset on-hook, dial 397. PRESS THE BUTTON TO PROGRAM appears. 2. Press the feature button that you want to program as a speed-dial button. 3. Dial 381. 4. Do one of the following: Press (Up) or (Down) to scroll through the speed-dial location. Enter the speed-dial location (000 to 999 or 0000 to 4999). Page 28 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Answering and Placing Calls Using the Directory You can use the Directory to find internal or external contacts or find and activate system features. The directory uses Intelligent Directory Search (IDS), which is similar to the “text on 9 keys” (T9) predictive search feature used for mobile phones. The Directory has the following three subdirectories: Intercom: Find and dial internal numbers. Outside: Find and dial external numbers listed in the company directory. Feature: Find and activate system features. When searching the directory, dialpad buttons can represent several characters, as shown in the following table. As you enter characters, the entries that best match the characters entered appear. The system connects the character sequence to possible directory matches. For example, to find the name “Jones,” dial 56637. Button Characters Represented 0 0 1 1 2 2ABCabcÇâäàåçÄÅá 3 3DEFdeféêëèÉ 4 4GHIghiïîìí 5 5JKLjkl 6 6MNOmnoôöòÖóñÑ 7 7QPRSqprs 8 8TUVtuvüûùÜú 9 9WXYZwxyzÿ (Up) Scroll to next entry (Down) Scroll to previous entry * Cancel search # Activate selection (Hold) Move the cursor to the left, deleting existing characters See the following section on using the directory. To search for a directory name or feature: 1. Press (Directory), and then press one of the following: 1 for the IC directory. 2 for the Outside directory. 3 for the Feature directory. 2. Press the dialpad buttons to enter (up to 20) characters. See the table on page 29 for dialpad button character descriptions. 3. Press NOTE (Up) or (Down) to scroll through the entries. The IC directory may display two similar entries, one without an asterisk and one with an asterisk. The entry without an asterisk is the primary extension—the entry with an asterisk is a secondary extension. 4. Press # while the display shows the entry to dial a number or activate a feature code. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 29 Answering and Placing Calls Using Account Codes Account codes record information for telephone record reports. You may be required to enter account codes when placing calls. Contact your system administrator for more information about using account codes. There are three types of account codes: Standard account codes: Automatically entered into the telephone record report whenever you place a call. Forced account codes: Entered before you can place an outside call. Optional account codes: Entered at any time during a call. To enter an optional account code: 1. While off-hook, press (Special), and then dial 390. 2. Enter the optional account code, and then press #. To set an account code for all calls placed from your telephone: Dial 391 followed by the account code, and then press #. ACCOUNT CODE ACCEPTED appears. This code is used for all calls made from your telephone until it is disabled. To disable the code: Dial 391, and then press #. ACCOUNT CODE CLEARED appears. Page 30 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Call Features Call Features The following sections describe call-related features. Using Handsfree Mode You can use Handsfree Mode to activate the speakerphone. The Ring Intercom Always feature prevents calls from being answered in Handsfree Mode (see the following section). NOTES You cannot use Handsfree Mode if you are using a headset, or if you have more than one telephone assigned to an extension number. The telephone uses half-duplex audio when using the speakerphone (both parties cannot talk at the same time). To use Handsfree Mode: With the handset on-hook, dial 319. HANDSFREE MODE ON appears. Dial 319 again to turn Handsfree Mode off. Using Ring Intercom Always If another extension has Handsfree Mode enabled for incoming internal calls (see the previous section), you can use Ring Intercom Always to override Handsfree Mode on the extension, requiring the called party to pick up the handset to answer your call. To override Handsfree Mode for the current call: 1. Before you enter the extension number, press #. RING EXTENSION NUMBER appears. 2. Dial the extension number. To use Ring Intercom Always to always send non-handsfree calls: With the handset on-hook, dial 377. RING IC ALWAYS ON appears. Dial 377 again to turn Ring Intercom Always off. Using Mute You can use Mute to temporarily turn off your microphone, preventing the other party on the call from hearing you. To mute or unmute the microphone: While on a call, press Mute on. MICROPHONE MUTE ON appears. When the microphone is muted, the Mute button lamp is lit. Press Mute again to unmute the microphone. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 31 Call Features Placing Calls On Hold You can place calls on either Individual Hold or System Hold. Individual Hold: Places an internal or external call on hold at your telephone. System Hold: Places an external call on hold in the system. You can then pick up the call from any telephone that indicates a flashing Call button for the call, including the telephone that placed it on hold. To place a call on Individual Hold: 1. Press (Hold). ENTER EXTENSION NUMBER appears. 2. Hang up or place another call. To place an outside call on System Hold: 1. Press (Special), and then dial 335. ENTER EXTENSION NUMBER appears. 2. Hang up or place another call. To place a call on hold and answer a waiting call: Press (Hold), and then press the flashing IC or Call button. To return to a call that is on hold: Press (Hold), and then lift the handset or press HOLDING appears. (Speaker). WAS Entering a Hookflash Some telephone companies require you to enter a hookflash (a quick hang up and release) for feature access. To enter a hookflash: While off-hook, press Page 32 (Special), and then dial 330. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Call Features Transferring Calls You can transfer calls to other extensions or external numbers. You can also transfer conference calls. See “Transferring a Conference” on page 39 for more information. Transferring Calls to Other Extensions To transfer a call to another extension: 1. While on the call, press (Transfer), and then enter the extension number. 2. Do one of the following: Wait for an answer, announce the call, and then hang up. If the extension is unavailable, press the flashing IC or Call button to return to the caller. Hang up to transfer the call and disconnect the call from your telephone. NOTE If your system administrator has enabled the Transfer-on-Connect Allowed feature for your telephone, you are automatically connected to calls transferred to your extension after the transferring party hangs up. If this option is turned off, you must press an IC or Call button to answer calls transferred to your extension. Transferring Calls to External Numbers To transfer a call to an external number: 1. While on the call, press (Transfer). 2. Press the Outgoing button or the Outgoing Call access code (the default code is 8) to select an outside line. 3. Dial the phone number. 4. Do one of the following: Wait for an answer, announce the call, and then hang up. If the extension is unavailable, press the flashing Call button to return to the caller. Hang up to transfer the call and disconnect the call from your telephone. Using Reverse Transfer You can use Reverse Transfer (Call Pick Up) to answer calls that are ringing or holding at other extensions. For example, if you receive a call while you are away from your desk, you can pick up the call from another extension. To use Reverse Transfer: 1. Lift the handset, and then press 4. ENTER EXTENSION NUMBER appears. 2. Dial the extension or hunt group number where the call is ringing or holding. The call is transferred to the telephone you are using and you are connected to the caller. See “Hunt Groups” on page 61 for more information about using hunt groups. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 33 Call Features Viewing Your System Information If you are on a call, you can temporarily view your user information (your user name and your extension number) and the date and time. To display your user information and the date and time: Press (Special), and then dial 300. Viewing Caller ID Information If you are currently connected to an external caller with Caller ID, you can toggle between the caller’s name and number. If the name is unavailable, CANNOT ACCESS FEATURE appears. To show the outside party’s name/number: Press Page 34 (Special), and then dial 379. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Call Features Forwarding Calls You can use Manual Call Forwarding or System Forwarding to forward calls. Manual Call Forwarding The following table describes Manual Call Forwarding options. Call Forward Feature Description Code Call Forward All Calls All incoming calls are forwarded. 355 Call Forward if no Answer All incoming calls are forwarded if not answered. (The timer is set by the system administrator.) 356 Call Forward If Busy When your telephone is busy, all incoming calls are forwarded without ringing. 357 Call Forward If No Answer/Busy All incoming calls are forwarded if your telephone is busy, or if you do not answer. 358 To use Manual Call Forwarding: 1. Press the Fwd button or dial the Manual Call Forwarding feature code from the table above. ENTER FORWARD DEST appears. 2. Enter the extension number or press the Outgoing button, and then dial the phone number. FWD ALL CALLS TO appears. To cancel a Manual Call Forwarding request: Do one of the following: Press the Fwd button, and then press (Speaker), or lift and replace the handset. ANY CALL FORWARD CANCELED appears. System Forwarding You can use System Forwarding to route calls based on the type of call and the idle or busy status of your telephone. You cannot program the System Forward destination. You can only turn it on or off. Contact your system administrator for more information. To turn System Forwarding on or off: Dial 354 to turn System Forwarding on. SYSTEM FORWARD ON appears. Dial 354 again to turn System Forwarding off. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 35 Call Features Using Dynamic Extension Express When you enable Dynamic Extension Express (DEE) on your IP phone, your incoming calls are automatically routed to one or more preprogrammed associated destinations according to the routing steps programmed for you. Typically, your desk phone is configured to be your main extension. You may be programmed for up to ten associated destinations including: softphone, home IP phone, voice mail, mobile phone, home phone, desk phone 2, mobile phone 2, softphone 2, home IP phone 2, and home phone 2. Your desk phone, softphone, home IP phone and voice mail extensions are already programmed in the system, so your system administrator can easily include them in your routing steps. To include your mobile and home phone numbers in your routing steps, you will need to provide these numbers to your system administrator. To enable Dynamic Extension Express: Dial 363 or 364. PERSONAL ROUTING ON appears on the display. To disable Dynamic Extension Express: Dial 362 or 364. PERSONAL ROUTING OFF appears on the display. To answer a call routed to your mobile or home phone: 1. Answer the call when it rings your telephone. After you speak, the Dynamic Extension Express prompt is played. 2. Do one of the following: Press # to accept the call. NOTE You do not need to wait for the prompt to accept the call. You can accept the call immediately by pressing the # button. Press * to send the call to the voice mailbox associated with your main extension (not your mobile phone or home phone voice mailbox). If you do not have a voice mailbox, the “Press *...” prompt is not played and the call is routed to your main extension. If you hang up, the call continues to follow your programmed routing steps. When you enable Dynamic Extension Express, your incoming calls are routed as specified by the routing type programmed for you by your system administrator. The table below provides descriptions for the default routing types. Routing Type Description Mobile Twinning Calls simultaneously ring your desk phone and mobile phone, before going to voice mail. Delayed Mobile Twinning Calls ring your desk phone first, and then ring both your desk phone and mobile phone, before going to voice mail. Check with your system administrator to see which routing type has been programmed for you. Your administrator can modify these routing types by adding or removing routing steps, adding or removing destinations, and changing the ring timers, if required. To ensure that calls are routed correctly to your mobile and home phones, inform your system administrator if either of these phone numbers change. Page 36 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Call Features The following call types do not follow Dynamic Extension Express: Hunt group calls Hunt group announcement/overflow calls Transfer recalls, Hold recalls, Conference recalls, and Attendant recalls NOTE A recall occurs when a feature cannot be completed or the feature times out, and the call returns to the originating extension. For example, a holding call will recall the extension where it was placed on hold when the hold timer expires. Using the Handoff - Push/Pull Feature Dynamic Extension Express also includes the Handoff feature, which includes the following functions: Push: The Handoff “push” function allows you to move an active call from any of your internal associated destinations (unless that destination is a 5610 Cordless Handset or a UC Express SIP Softphone) to an associated destination without disconnecting audio. The push function is useful if you are leaving the work area, but want to remain connected to an active call. Pull: The Handoff “pull” function allows you to pull a call that was previously routed to your mobile or home phone back to any of your internal associated destinations (unless that destination is a 5610 Cordless Handset or a UC Express SIP Softphone). The pull function is useful if you answer a call on your mobile phone and then return to your desk. To use the Dynamic Extension Express – Handoff “push” feature: 1. While on an active call at your telephone, press (Special), and then dial 388. HANDOFF IN PROGRESS appears on the display and the call rings all of your associated destinations (except voice mail). 2. Answer the call at one of your associated destinations. For mobile and home phones, press # to accept the call. To use the Dynamic Extension Express – Handoff “pull” feature: While on an active call on an associated destination device, lift the phone handset and dial 388. A confirmation tone is played and the call is pulled back to your telephone. NOTE If you enter the handoff feature code (388) and the display shows NO CALL TO HANDOFF, the call cannot be handed off (see page 69). To cancel the Dynamic Extension Express – Handoff feature: While the handoff is in-progress, press (Special), and then dial 388. HANDOFF CANCELLED appears on the display for your main extension. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 37 Call Features Receiving Message Waiting Indications If your main extension receives a message waiting indication (MWI) from voice mail or the system’s station messaging feature, the MWI is propagated (as applicable) to your other internal associated destinations. If any of your internal associated destinations responds to the MWI, then the MWI is cleared on all of them. Note that if any destination other than your main extension receives an MWI, it will not propagate to the other internal destinations. The MWI has to originate on your main extension. If enabled, the system can send a text message to your mobile phone to indicate that your main system extension has received a new station message or voice mail message. Here is an example of an e-mail message generated by a station message: You have a message from at extension . Callback: Here is an example of an e-mail message generated by a voice mail message: You have a new voice mail message for mailbox number . Callback: You can use the callback number to easily call back into the system and speak to the messaging party or retrieve your voice mail message. Check with your administrator if you would like to take advantage of this feature. Page 38 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Call Features Placing Ad Hoc Conference Calls You can place a Ad Hoc1 conference call with up to three internal or external parties (for a total of four parties, including yourself). To place a conference call: 1. While on the first call, press the Conf button to place the call on hold. CALL NEXT PARTY TO CNF appears. 2. Place a call to the next conference party (for external calls, press the Outgoing button or the Outgoing Call access code [8 is the default code], and then dial the number). 3. After the party answers, announce the conference, and then press the Conf button to place the call on hold. If necessary, repeat this step to add the remaining conference party. 4. Press the Conf button again to start the conference. CNF IN PROGRESS appears. Adding a Conference Party You can add a conference party during the conference. To add a conference party: 1. Press the Conf button. This leaves the conference parties connected. 2. Place a call to the party to be added to the conference, and then announce the conference. Press the Conf button (twice) to add the party and rejoin the conference. Transferring a Conference You can transfer an existing conference to another extension. To transfer a conference: 1. During the conference, press (Transfer), and then dial the extension number. 2. Announce the conference (if desired), and then hang up. CONFERENCE TFR from appears on the called party’s display. The party must then press the flashing Conf button to connect to the conference. Dropping Out of a Conference You can drop out of a conference and return to the conference later. To drop out of a conference: Press the Conf button or (Hold), and then hang up. ENTER EXTENSION NUMBER appears. This removes you from the conference but leaves the other parties connected. To return to the conference: Press the flashing Call button. CONFERENCE WAS HOLDING appears, and you are reconnected to the conference. 1. The traditional conferencing feature that has always been available on the 5000 CP has been renamed as Ad Hoc Conferencing to differentiate it from the Meet-Me Conferencing feature introduced in v5.0 (see page 41). Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 39 Call Features Ending a Conference and Placing all Parties on Hold You can end a conference and place all conference parties on Individual Hold, allowing you to toggle between the held parties and speak to one party at a time. To end a conference and place all parties on Individual Hold: Press the Conf button, and then press HOLD appears. (Hold). CONFERENCE PARTIES ON To toggle between the held callers: Press parties. Page 40 (Hold) twice for internal parties or the applicable Call button for external Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Call Features Using Meet-Me Conferencing The Meet-Me Conferencing feature allows up to eight internal and/or external callers to dial into a conference instead of being manually added by an internal user, as is the case when using the system’s traditional “ad hoc” conferencing method. (See page 39 for details on using the traditional Ad Hoc Conferencing method.) Note that unlike an Ad Hoc Conference, a Meet-Me Conference can consist entirely of outside parties; an internal system user does not have to be present. Also note that the traditional Ad Hoc Conferencing feature is still available for use even when Meet-Conferencing is licensed and enabled. Both conferencing types are available for use as needed. Many existing system features that work with the traditional Ad Hoc Conferencing method (such as Record-A-Call, transferring a conference, placing a conference on hold, etc.) also work with the Meet-Me Conferencing method. Conference Assistant Conference Assistant is a voice-guided application that allows you to initiate or join a Meet-Me Conference by dialing the extension number assigned to the Conference Assistant and then entering the proper access code. If you enter an invalid access code, the Conference Assistant prompts you to try again. The Conference Assistant also lets you know if there are no conferencing circuits available or if the conference is already at capacity. Access Codes If Meet-Me Conferencing is enabled for your system, you have the ability to initiate or join a Meet-Me Conference by dialing the Conference Assistant and entering a valid access code. Access codes are typically generated to match each user’s extension number, so that each user has their own personal access code for establishing Meet-Me Conferences. In addition to the personal access code that may match your extension, you can also use the Configuration Assistant application to create conferences with unique system-generated access codes. (See page 47 for details.) Setting Up a Meet-Me Conference You can set up a Meet-Me Conference using either your personal access code or a systemgenerated access code. (See the previous section for more information on access codes.) To set up a Meet-Me Conference using a personal access code: 1. Tell all intended conference participants to call the Conference Assistant at an agreedupon time and use your extension number as the access code to join the conference. 2. Follow the instructions for “Joining a Meet-Me Conference“ on page 42. To set up a Meet-Me Conference using a system-generated access code: 1. Generate a Meet-Me Conference access code through the Configuration Assistant application (see page 50). 2. Tell all intended conference participants to call the Conference Assistant at an agreedupon time and use the system-generated number as the access code to join the conference. 3. Follow the instructions for “Joining a Meet-Me Conference“ on page 42. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 41 Call Features Joining a Meet-Me Conference You can join a conference with up to seven internal and/or external parties (for a total of eight parties, including yourself). To join a Meet-Me Conference: 1. Dial (or ask to be transferred to) the Conference Assistant extension number. (See your administrator if you do not know the extension number.) You hear: “Welcome to the Conference Assistant. Enter an access code, and then press Pound (#). To cancel, press Star (*).” 2. Enter the appropriate access code for the Meet-Me Conference you wish to join (see “Access Codes“ on page 41). Note the following: If you enter an invalid access code, the Conference Assistant prompts you to try again. If there are no conferencing resources available, or if the maximum number of allowed parties has already been reached, you hear: “All circuits are busy. Please try again later.” Hang up and try again later. 3. Once connected, you can talk with other parties who join the conference. (Your phone shows the name of the conference [if available], the total conference duration, and the number of parties connected to the conference.) Note the following: If you are the first person in the conference, you hear: “You are the first person in this conference. Please stay on the line.” You then hear music until another caller joins the conference or you hang up. As other parties join or leave the conference, you hear a tone to signal the change. If the conference contains only external callers, the Conference Assistant will prompt the participants to extend the conference after a period time. If no one presses a digit to extend the conference, the system terminates the conference. Dropping Out of a Meet-Me Conference You can leave a conference and still leave the other parties connected. To exit a Meet-Me Conference: Hang up. The other parties in the conference remain connected. Putting a Meet-Me Conference on Hold You can put a conference on hold at your phone (the other parties remain connected) and then later return to the conference. To put a Meet-Me Conference on Hold: During the conference, press the Hold button. To return to the Meet-Me Conference: Lift the handset or press the Speaker button, and then press the Hold button. Transferring a Meet-Me Conference You can remove yourself from a conference and transfer it to another party. To transfer a Meet-Me Conference to another extension: Page 42 1. During the conference, press the Transfer button, and then dial the extension number. 2. Announce the conference (if desired), and then hang up. CONFERENCE TFR from appears on the called party’s display. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Call Features Using Record-A-Call You can use Record-A-Call to record an ongoing call as a mailbox message.2 You can then retrieve the message from your voice mailbox. The Record-A-Call feature stays active after the other party hangs up, so you can add to the recorded call with your own message. To use Record-A-Call: 1. While on a call, press CALL appears. (Special), and then dial 385. REQUESTING RECORD-A- 2. Enter the voice mailbox number where you want the recording to be saved. RECORD-A-CALL IN PROGRESS appears, and both you and the calling party hear a confirmation tone (if enabled). NOTE If your system administrator assigns the Record-a-Call voice mailbox destination, you do not need to enter the voice mailbox number. To stop Record-A-Call: Do one of the following: Press (Special), and then dial 385. Hang up. Using Group Listen You can use Group Listen to activate the speaker while you use the handset or headset to continue speaking. This allows other people to hear the other party on the call while the other party can only hear you (through the handset microphone). You cannot use Group Listen in Handsfree Mode. To use Group Listen: While on a call, press (Special), and then dial 312 to turn Group Listen on. GROUP LISTEN ON appears, and you hear a confirmation tone. The other party does not hear the confirmation tone. Dial 312 again to turn Group Listen off. 2. This feature may or may not be enabled for your system. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 43 Call Features Using Call Logging Your call logs are records of your most recent missed, received, and dialed calls. A maximum of 20 entries are stored in each call log.3 You can use Call Logging to: View recent call activity. View caller ID information. Return or redial calls. To use Call Logging: 1. Dial 333. 2. Select one of the following options: Press 1 (MISS). Press 2 (RCV). Press 3 (DL). Press 4 (CLR). 3. Press (Up) or (Down) to scroll through the entries. The display shows the party’s name and the extension or outside number (if available) and the date and time. If no Caller ID information is available, UNKNOWN CALLER appears. To return a call or redial a number listed in a call log: Press # while the display shows the number. To delete individual call log entries: Press 0 to delete the displayed entry. 3. Page 44 This feature may or may not be enabled for your system. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Call Features Using Secondary Extension Buttons Secondary Extension buttons must be programmed by your system administrator. You can use programmable buttons as “secondary extensions.” Secondary Extensions are assigned to other extensions in the system (primary extensions). Because Secondary Extension buttons are programmed by the system administrator, you cannot change the buttons (for example, assign features to the buttons). When programmed, you can use Secondary Extension buttons to: Place an internal call to the primary extension. View the call activity at the primary extension. Transfer calls to the primary extension. Answer a call that is ringing or holding on any Call button at the primary extension. The system administrator must set up the Call buttons for internal calls or you cannot use Secondary Extensions at the primary extension. NOTES You can use Secondary Extension buttons to notify you when a given number of calls are waiting at the primary extension. If a Secondary Extension button is flashing (the primary extension has an incoming call), you can press # before pressing the flashing Secondary Extension button to call the primary extension and not answer the incoming call. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 45 Call Features Using Hot Desking The Hot Desking feature allows users to share phones or temporarily move to other phones and yet maintain their personal identity and preferred phone configuration settings. If your administrator has set you up with a Hot Desking Profile, you can log on to any Hot Deskenabled base phone using the Hot Desk feature code (default is 348), your assigned Hot Desk Profile extension number, and your assigned Hot Desk Profile passcode. The system will then apply your phone profile – phone settings such as extension (intercom directory) number, classof-service, language, programmable buttons, etc. – to the phone. To log on to a Hot Desk-enabled base phone: 1. At a Hot Desk-enabled base phone, do one of the following: Press the Hot Desk feature button (if one is programmed on the phone). Press the LOGIN menu button (on six-line display phones). Dial 348. Display phones show ENTER HOT DESK EXTENSION. 2. Dial your assigned Hot Desk extension number. Display phones show ENTER PASSCODE. 3. Dial your assigned Hot Desk passcode. Display phones show HOT DESK SESSION ACTIVATED for five seconds. To log off of a Hot Desk session: Do one of the following: Press the Hot Desk feature button (if one is programmed on the phone). Press the LOGOUT menu button (on six-line display phones). Dial 348. Display phones show HOT DESK SESSION TERMINATED for five seconds. If you forget to log off and then attempt to log on elsewhere, the system automatically logs you off of the original phone so that you can log on to the new phone. Page 46 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Call Features Using Configuration Assistant If Configuration Assistant is enabled for your system, you can access this voice guided configuration portal that provides easy-to-use, remote access to the following phone configuration options: Dynamic Extension Express (see page 48) DND (see page 49) Manual Call Forwarding (see page 49) Meet-Me Conferencing (see page 50) NOTE You need a Configuration Assistant extension number to use this feature. Contact your system administrator for more information. Changing Your Station Passcode Before using Configuration Assistant, Mitel recommends that you change your default station (telephone) passcode to something more secure. To change your station passcode: 1. Dial 392. ENTER PASSCODE appears. 2. Enter your current passcode (the default passcode is your extension number), followed by #. CHANGE PASSCODE TO appears. 3. Enter the new passcode followed by #. VERIFY PASSCODE appears. 4. Enter the new passcode again followed by #. DATABASE UPDATED appears. To change the passcode from another phone, see “Changing the Station Passcode” on page 53. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 47 Call Features Accessing Configuration Assistant Follow the instructions below to access Configuration Assistant. To access Configuration Assistant: 1. Access the Configuration Assistant extension number from inside or outside the system by: dialing it from any phone in the system. being transferred to it. dialing it from automated attendant, voice mail, or DISA. 2. Do one of the following: If calling from your main desktop phone, proceed to step 3. If calling from someone else’s main desktop phone that is designated as a Configuration Assistant user, press the Star button (*), and then enter your extension number. If calling from a phone that is not designated as a Configuration Assistant user, enter your extension number. If transferred to Configuration Assistant or if calling Configuration Assistant from outside the system, enter your extension number. 3. Enter your station passcode, and then press #. You may now change the settings for any of the following features: Dynamic Extension Express (see below) DND (see page 49) Manual Call Forwarding (see page 49) Meet-Me Conferencing (see page 50) Changing the Dynamic Extension Express Settings NOTE This feature is available only if the authenticated extension is identified as a Dynamic Extension Express (DEE) user. See “Using Dynamic Extension Express” on page 36 for more information. To change the DDE settings using Configuration Assistant: 1. Access Configuration Assistant as described in “Accessing Configuration Assistant” on page 48. 2. Follow the voice prompts to change your DEE status (on or off) or program a mobile phone number. When this option is selected, Configuration Assistant first states whether DEE is currently enabled or not (for example, “Dynamic extension is enabled”), and then offers the following DEE functions: Enable (only if DEE is disabled) Disable (only if DEE is enabled) Program mobile phone number [you do not have to enter the Outgoing feature code (8)] 3. Page 48 Hang up, or press the Star button (*) to return to the main menu. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Call Features Changing the DND Settings See “Using Do-Not-Disturb (DND)” on page 69 for more information about using DND. To change the DND settings using Configuration Assistant: 1. Access Configuration Assistant as described in “Accessing Configuration Assistant” on page 48. 2. Follow the voice prompts to change your DND status (on or off). There is no option to provide a specific DND status message. When this option is selected, Configuration Assistant first states whether DND is currently enabled or not (for example, “Do-NotDisturb is currently disabled”), and then offers the following DND functions: 3. o Enable (only if DND is disabled) o Disable (only if DND is enabled) Hang up, or press the Star button (*) to return to the main menu. Changing the Manual Call Forwarding Settings See “Manual Call Forwarding” on page 35 for more information about Manual Call Forwarding. To change the Manual Call Forwarding settings using Configuration Assistant: 1. Access Configuration Assistant as described in “Accessing Configuration Assistant” on page 48. 2. Follow the voice prompts to change your manual call forwarding status (on or off). There is no option to provide a specific call forwarding condition, such as no answer or busy. When this option is selected, Configuration Assistant first states whether call forwarding is currently enabled or not (for example, “Call Forwarding is enabled”) and then offers the following forwarding functions: Forward calls to voice mail Forward calls to an internal extension number Forward calls to an external phone number [you do not have to enter the Outgoing feature code (8)] Disable (only if Call Forwarding is enabled) 3. Hang up, or press the Star button (*) to return to the main menu. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 49 Call Features Managing Meet-Me Conferencing Access Codes See “Using Record-A-Call” on page 43 for more information about Meet-Me Conferencing. NOTES This feature is available only if Meet-Me Conferencing is enabled on your phone system. While using Configuration Assistant options, you can press the Star button (*) any time you wish to cancel the current operation and return to the main menu. To create a new Meet-Me Conference access code: 1. Access Configuration Assistant as described in your existing phone user guide. 2. Follow the voice prompts to select the conference option, and then select the option to create a new conference access code. Configuration Assistant states your new access code. 3. Hang up, or press * to return to the main menu. To delete an existing Meet-Me Conference access code: 1. Access Configuration Assistant as described in your existing phone user guide. 2. Follow the voice prompts to select the conference option, and then select the option to delete an existing conference access code. Configuration Assistant prompts you for the access code you wish to delete. 3. Enter the access code, and then press #. If you enter an access code that does not exist, Configuration Assistant prompts you to enter another access code. 4. Hang up, or press * to return to the main menu. To list all of your existing Meet-Me Conference access codes: 1. Access Configuration Assistant as described in your existing phone user guide. 2. Follow the voice prompts to select the conference option, and then select the option to list your conference access codes. Configuration Assistant first states the number of access code you have and then states all of your existing access codes. 3. Hang up, or press * to return to the main menu. To send yourself an e-mail message listing all of your existing conference access codes: 1. Access Configuration Assistant as described in your existing phone user guide. 2. Follow the voice prompts to select the conference option, and then select the option to email yourself a list of your existing access codes. You should soon receive an e-mail message that lists all of your existing access codes, including the code number, code name, and when the code was last used. 3. Hang up, or press * to return to the main menu. NOTE Page 50 If you do not have an e-mail address configured in the phone system database, then this option is not provided. Check with your administrator if you would like to take advantage of this feature. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Call Features Using Remote Programming If the Configuration Assistant feature is enabled for your system, Mitel recommends that you use Configuration Assistant instead of the Remote Programming feature described in this section. Configuration Assistant offers an enhanced, voice guided configuration portal that provides easy-to-use, remote access to the Call Forwarding, Dynamic Extension Express, and DND features. See page 47 for using Configuration Assistant. To use Remote Programming to access these features from another system phone or an external phone, follow the instructions in this section. 4 NOTE A Direct Inward System Access (DISA) number is required to use Remote Programming from an external phone. Contact your system administrator for more information. Changing the Dynamic Extension Express Settings See “Using Dynamic Extension Express” on page 36 for more information about Dynamic Extension Express. To enable Dynamic Extension Express using Remote Programming: 1. Do one of the following: Call your DISA number (provided by the system administrator). If necessary, enter your DISA security code. Use any telephone on the system. 2. Dial 359. 3. Enter your extension number. 4. Enter your passcode followed by #. See page 47 for details on setting up a station passcode for your extension. 5. Dial 363 (Dynamic Extension Express On). To disable Dynamic Extension Express using Remote Programing: Follow steps 1. - 4. above, dial 362 (Dynamic Extension Express Off), and then hang up. 4. This feature may or may not be enabled for your system. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 51 Call Features Changing the DND Settings See “Using Do-Not-Disturb (DND)” on page 57 for more information about using DND. To turn on DND using Remote Programming: 1. Do one of the following: Call your DISA number (provided by your system administrator). If necessary, enter your DISA security code. Use any phone on the system. 2. Dial 359. 3. Enter your extension number. 4. Enter your passcode followed by #. See page 47 for details on setting up a station passcode for your extension. 5. Dial 370. 6. Enter the DND message number (01 to 20), and then enter the second-line message text (if applicable). To turn off DND using Remote Programming: Follow steps 1. through 4. above, and then dial 371. Changing the Manual Call Forwarding Settings See “Manual Call Forwarding” on page 35 for more information about Manual Call Forwarding. To turn on Manual Call Forwarding using Remote Programming: 1. Do one of the following: Call your DISA number (provided by your system administrator). If necessary, enter your DISA security code. Use any phone on the system. 2. Dial 359. 3. Enter your extension number. 4. Enter your passcode followed by #. See page 47 for details on setting up a station passcode for your extension. 5. Dial one of the following Call Forwarding feature codes: 355 (All) 356 (No answer) 357 (Busy) 358 (No Answer/Busy) 6. Enter either an extension number or 8 followed by a phone number. To turn off Call Forwarding using Remote Programming: Dial 355, and then hang up. Page 52 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Call Features Changing the Station Passcode You can use Remote Programming to change the station (telephone) passcode. To change the station passcode using Remote Programming: 1. Do one of the following: Call your DISA number (provided by your system administrator). If necessary, enter your DISA security code. Use any phone on the system. 2. Dial 359. 3. Enter your extension number. 4. Enter your passcode followed by #. 5. Dial 392. 6. Enter the new passcode followed by #. 7. Enter the new passcode again followed by #. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 53 Messages Messages This section describes the following system messaging features: Inter-station messages: Inter-station messages are alerts sent to your telephone by other internal parties, notifying you to contact the party who left the message. The (Message) button and Message/Ring Indicator flash to notify you of the new message. You can then either delete the message or reply to the message, which automatically places a call to the party who left the message. Do-Not-Disturb (DND) messages: Messages that other internal parties see when your telephone is in DND. See “Using Do-Not-Disturb (DND)” on page 57. Reminder Messages: Messages that you can use to notify yourself of upcoming appointments, meetings, and so on. See “Using Reminder Messages” on page 58. Pages: Announcements sent over telephone speakers or external speakers. See “Paging Other System Users” on page 59. Voice messages: System voice mail messages. NOTE Because a variety of voice mail products work with the 5000 CP, this guide does not include voice mail instructions. For voice mail instructions, refer to the voice mail user guide for your system. For example, refer to the Enterprise Messaging, Unified Voice Messaging, and Embedded Voice Mail Card User Guide, part number 835.3205, or the Mitel NuPoint Messenger Messaging User Guide on the Mitel Web site (http://edocs.mitel.com). Contact your system administrator for more information about your voice mail system. Leaving Messages at Other Extensions You can leave inter-station or voice mail messages for other internal parties. To leave an inter-station or voice message for a busy IC extension: 1. Press (Message). HANG UP OR WAIT FOR MSG CENTER appears. 2. Do one of the following: Hang up to leave an inter-station message. MESSAGE LEFT FOR appears. Stay on the line to connect to the message center (usually voice mail). To leave an inter-station message without placing an internal call: 1. Dial 367 (Leave Message). LEAVE MESSAGE ON EXTENSION appears. 2. Enter the extension number. MESSAGE LEFT FOR appears. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 55 Messages Viewing and Responding to Messages When you have waiting messages, the (Message) button and Message/Ring Indicator flash and the display shows the number of waiting messages. NOTE If your handset or speakerphone is off-hook when you view an inter-station message, you automatically call the party who left the message. The display shows new messages as follows: Inter-station messages sent by other internal parties are indicated by the party’s programmed user name. Voice messages are indicated by FROM MBOX . To view or respond to messages: 1. With the handset on-hook, press (Message). Messages are displayed as first in/first out. If there is more than one message, you can repeatedly press (Message) to scroll through the messages. 2. When the desired message is displayed, press #, or lift the handset for privacy, and then press # to respond. (If your handset is off-hook and you press (Message), you automatically place a call to the party or message center who left the message.) Canceling Messages Left at Other Extensions You can cancel messages left at other extensions. To cancel a message left at another extension: 1. Dial 366. CANCEL MESSAGE ON EXT # appears. 2. Enter the extension number where you left the message. MESSAGE CANCELED FOR appears. Deleting Waiting Inter-Station Messages You can delete waiting inter-station messages. NOTE To delete waiting voice messages, you must connect to your voice mailbox. To delete waiting inter-station messages: 1. Press (Message). MSG appears. 2. Press * to delete the displayed message. Page 56 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Messages Using Do-Not-Disturb (DND) You can use DND to stop calls and pages to your extension. When activated, internal calling parties see your selected DND message. DND does not block queue callbacks, recalls, and incoming external calls. The following table shows the 20 default DND messages. If your system administrator changes your DND messages, you can record the new messages in the “New Message” column for reference. Code Default Message New Message Code Default Message 01 Do-Not-Disturb 11 Out of Town ‘Til 02 Leave a Message 12 Out of Office 03 In Meeting Until 13 Out Until 04 In Meeting 14 With a Client 05 On Vacation/ Holiday ’Til 15 With a Guest 06 On Vacation/ Holiday 16 Unavailable 07 Call Me At 17 In Conference 08 At the Doctor 18 Away from Desk 09 On a Trip 19 Gone Home 10 On Break 20 Out to Lunch New Message You can enter a second line of text (up to 20 characters) for DND messages. For example, if you select IN MEETING UNTIL, you can enter “3:30” on the second line. When other internal parties try to call you, their displays show “IN MEETING UNTIL 3:30.” To turn on DND: 1. Press the DND button. SELECT DND MSG # (01-20) appears. 2. Do one of the following: Press (Up) or (Down) to scroll through the messages. Enter the two-digit number for the DND message from the preceding table. 3. If applicable, enter the additional text for the DND description, if applicable. See “Using the Dialpad Buttons to Enter Characters” on page 13 for dialpad character descriptions. 4. Press (Speaker) or lift and replace the handset. To turn off DND: Press the DND button. DO-NOT-DISTURB OFF appears. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 57 Messages Using Reminder Messages You can use Reminder messages to alert you at a selected time, up to 24 hours in advance. At the selected time, the Reminder message signals you with eight short tones and your display shows the message, even if you are on a call. The following table shows the 20 default Reminder messages. If your system administrator changes your Reminder messages, you can record the new messages in the “New Message” column for reference. Code Default Message New Message Code Default Message 01 Meeting 11 Call Engineering 02 Staff Meeting 12 Call Marketing 03 Sales Meeting 13 Call Accounting 04 Cancel Meeting 14 Cancel DND 05 Appointment 15 Cancel Call Fwd 06 Place Call 16 Take Medication 07 Call Client 17 Make Reservation 08 Call Customer 18 Review Schedule 09 Call Home 19 Lunch 10 Call Corporate 20 Reminder New Message To set a Reminder message: 1. With the handset on-hook, dial 305. SELECT REMINDER MESSAGE # (01-20) appears. 2. Do one of the following: Enter the two-digit number for the message from the table above. Press (Up) or (Down) to scroll through the messages. 3. Press # to select the message. 4. Enter the time you wish to receive the message in hours and minutes (for example, 0900 or 900 for 9:00). Then press #. The display shows the Reminder message state. If your system is set for 24-hour format, enter the applicable time (1400 = 2:00 P.M.). If your system is set for 12-hour format, press 1 for A.M. or 2 for P.M. To cancel all Reminder message requests: With the handset on-hook, dial 306. REMINDER MSGS CANCELED appears. To clear a received Reminder message: With the handset on-hook, press *. Page 58 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Messages Paging Other System Users You can place page announcements through telephone speakers or external speakers (if applicable). Your system may use page zones to prevent announcements from transmitting through every telephone in the system. Each page zone contains a different combination of extensions and external paging equipment. Contact your system administrator for page zone information. You can use the following table to save the page zone information for future reference. Page Zone Name Number Description Placing a Page Announcement The following instructions describe how to place a page announcement. To place a page announcement: 1. Press 7. 2. Enter the page-zone number (0 to 9). 3. Wait for the tone, make your announcement, and then hang up. Enabling or Disabling the Page Feature You can enable or disable the Page feature for your extension. If your extension is assigned to more than one page zone, the Page on/off feature code enables or disables your extension for all pages zone (you cannot select individual zones). To enable or disable paging for your telephone: Dial 325 to enable paging. PAGE RECEIVE ON appears. Dial 325 again to disable paging. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 59 Hunt Groups Hunt Groups Hunt groups are groups of internal parties (agents) who share a common (hunt group) extension number. Calls can either be placed to the hunt group (using the hunt group extension number) or to a specific agent (using the agent’s extension number). Hunt groups are programmed by the system administrator. Hunt groups types are either “UCD” or “ACD.” UCD Hunt Groups: Uniform Call Distribution (UCD) agents do not log in to the hunt group to receive calls. ACD Hunt Groups: Automatic Call Distribution (ACD) agents log in to the ACD hunt group to receive calls. Calls are distributed by either Agent IDs or extensions: o Agent IDs: Each agent is assigned an Agent ID number for logging in to the hunt group (see the next section). Hunt group calls are distributed to logged-in agents according to their Agent ID number instead of their extension number. Agents can log in to any ACD hunt group phone. o Extensions: Hunt group members do not use Agent IDs, and calls are distributed to phones where the agents are logged in. Logging in to ACD Hunt Groups You must log in to an ACD hunt group to receive hunt group calls. To stop calls, you either log out of the ACD hunt group or divert calls. See “Diverting Hunt Group Calls” on page 63. Only one agent can be logged in to a telephone. NOTES If the ACD Agent ID Automatic Connect option is enabled for your hunt group and you are using a headset, you are automatically connected to waiting calls when you log in. The first call you receive after you log in rings until you answer it; however, you are automatically connected to subsequent calls. To log in to or out of all ACD hunt groups in which you are a member: Dial 328 to log in to ACD hunt groups followed by your Agent ID, if necessary. AGENT LOGGED INTO ALL ACDS appears. Dial 328 again to log out of all ACD hunt groups. To log in to one or more ACD hunt groups: 1. Dial 326. The display shows AGENT LOGIN ACD HG #. 2. Do one of the following: Enter the ACD hunt group number. Press # to log in to all of your ACD hunt groups. The display shows AGENT LOGIN AGENT ID. 3. Enter your Agent ID (if applicable), or press # if you do not have an agent ID. The display shows the log in status for one or all hunt groups. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 61 Hunt Groups Logging out of ACD Hunt Groups You can log out of all ACD hunt groups at once or log out of each hunt group one at a time. To log out of one or more ACD hunt group: Do one of the following: Dial 328 to log out of all of your ACD hunt groups. The display shows AGENT LOGGED OUT OF ALL ACDS. Dial 327 to log out of one hunt group at a time. If you were logged in to only one hunt group, the display shows AGENT LOGGED OUT OF HUNT GROUP . If you were logged in to more than one hunt group, the display shows AGENT LOGOUT HG #. Enter the extension number of the ACD hunt group. Stopping the ACD Hunt Group Wrap-up Timer Each time you end an ACD hunt group call, a wrap-up timer starts. The default wrap-up time is 15 seconds. Your system administrator can change the wrap-up timer settings. Until this timer expires, you will not receive another hunt group call; however, you can stop the wrap-up timer to allow calls to your extension. To stop the wrap-up timer: With the handset on-hook, dial 329. The display shows ACD WRAP-UP TERMINATED. Page 62 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Hunt Groups Other Hunt Group Features The following features can be used by ACD or UCD hunt groups. Requesting Agent Help You can use Agent Help to request help from a designated “Agent Help Extension” (usually your supervisor) during a call. When your request call rings at the Agent Help Extension, the supervisor can join the call or reject the request. NOTE Agent Help is not supported on peer-to-peer (P2P) calls. Contact your system administrator for more information. To use Agent Help: 1. While you are on a hunt group call, press (Special), and then dial 375. If you hear repeating tones, one of the following has occurred: The feature is not available at your telephone. NOTE You already have four parties in your call. Not enough system circuits are currently available. The Agent Help Extension is in DND. 2. If not preprogrammed, dial the Agent Help extension number. If the Agent Help Extension accepts the call, AGENT HELP IN PROGRESS appears. If the Agent Help Extension rejects the call, AGENT HELP REJECTED appears. Diverting Hunt Group Calls You can temporarily divert hunt group calls, preventing hunt group calls to your extension. To divert hunt group calls: Dial 324 to divert calls. The display shows the feature state DIVERT HUNT GROUP CALLS. Dial 324 again to program your telephone to accept calls. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 63 Hunt Groups Hunt Group Supervisor Features The following features can be used by hunt group supervisors only. Accepting or Rejecting Agent Help Calls Supervisors can accept or reject Agent Help calls. To accept an Agent Help request: Answer as usual. Your microphone is automatically muted. To reject an Agent Help request: Dial 376. AGENT HELP REJECTED appears. Monitoring Calls You can use Station Monitor to connect to a hunt-group call and hear both parties, but you cannot be heard by either one. Station Monitor stops if the hunt group member terminates or transfers the call. You can barge-in to or “steal” monitored calls, as described in the following sections. You can also record the call. See “Using Record-A-Call” on page 43 for more information about recording calls. NOTE Station Monitor is not supported on peer-to-peer (P2P) calls. Contact your system administrator for more information. To use Station Monitor: Dial 321, and then enter the extension number. MONITORING EXT appears. Monitored hunt group members may hear an “activation tone” when the feature is activated. Stealing Hunt Group Calls While monitoring a hunt group call, you can “steal” the call from the hunt group member, which disconnects the call from the agent and transfers the call to your extension. To steal a hunt group call: Dial 387. CALL STOLEN FROM EXT appears. Page 64 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Hunt Groups Using Barge-In While monitoring a hunt group call, you can use Barge-In to join the call. To monitor and/or barge in on a call: 1. To use the speakerphone: While on hook, dial 321. You hear a confirmation tone. ENTER EXT TO MONITOR appears. To use the handset: Lift the handset, and then dial 321. You hear a confirmation tone. ENTER EXT TO MONITOR appears. 2. Dial the extension number (or press the lit station speed-dial or PKM button) of the station to be monitored. You are automatically connected to the call. MONITORING (extension number) appears. 3. While silent monitoring a call, you have the following options: To barge in on a call, dial 386. BARGE-IN IN PROGRESS appears. While on a call, you can monitor, record, or steal the call by entering the appropriate feature code. To return to silent monitoring of the call, dial 386 again. To record the call, dial 385. To record a call, dial 385n. MONITORING (extension number) appears. While on a call, you can monitor or steal the call by entering the appropriate feature code. To stop recording the call, dial 385 again. To steal a call, dial 387. CALL STOLEN FROM (extension number) appears. The hunt group member’s display shows CALL STOLEN BY (extension number). After the supervisor steals the call, the call becomes a regular call. While on a call, you can record the call by dialing 385. To join and record a call, dial 386, and then dial 385. BARGE-IN IN PROGRESS appears. While on a call, the supervisor can monitor, stop recording, or steal the call by entering the appropriate feature code. To stop recording the call, dial 385 again. 4. To terminate any of the features: If off hook, hang up or enter the specific feature code of the feature you want to terminate. If on hook, press the Speaker button or enter the specific feature code of the feature you want to terminate. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 65 Troubleshooting Troubleshooting The following sections can help you solve problems that you may be experiencing with your telephone. Troubleshooting topics include: Contact Information: Information about system administrator contacts. Error Messages: Error messages and descriptions. Troubleshooting Tips: Possible problems and methods to solve them. Contact Information Your system administrator can help you with items such as changing your settings or modifying telephone features. System administrator duties include: Adding new user accounts. Setting the date and time. Programming System Speed-Dial numbers. Making database changes, such as changing user names and extension numbers. Contact your system administrator with questions that are not covered in this user guide. If you need further assistance, you can find provider information on the Mitel Web site (www.mitel.com). All sales, service, and support are coordinated at the local level. Error Messages The following error messages may appear when using your telephone. Message Reason CANNOT ACCESS FEATURE The feature is enabled but other feature-related conditions were not met. Make sure that all featurerelated conditions are met and retry. CANNOT ACCESS RESERVED FEATURE Your system does not support the feature. Contact your system administrator for more information. INVALID FEATURE CODE The feature code entered does not exist. Retry using the correct feature code (see page 17). INVALID EXTENSION NUMBER The extension number entered does not exist. Retry using a valid extension number. NO UPDATE PERFORMED The feature was not completed or one or more feature conditions were not met. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 67 Troubleshooting Troubleshooting Tips The following table includes troubleshooting tips for telephone and system features. NOTE You can often correct problems that you may be experiencing by resetting the telephone to the default settings. See “Resetting the Telephone to the Default Settings” on page 20. Problem Possible Solution The telephone is not working properly. Contact your system administrator. I cannot use one or more of the features described in this guide. The feature may not be enabled. Contact your system administrator for more information. I cannot program System Speed-Dial numbers. Your system administrator programs System Speed Dial numbers. I cannot change the time and date on the telephone display. Your system administrator programs the time and date. Contact your system administrator if you notice that the date and time are incorrect. I am experiencing audio problems on Contact your system administrator if you are having my telephone such as echo, distorted audio problems. sound, or choppiness. The name on the display is incorrect. Your system administrator assigns display names. I cannot use the local phone company star codes (for example, *82, *69) when I press the Outgoing button or use the Outgoing Call access code (8 is the default code) when calling an external number. Rather than pressing the Outgoing button or 8 to access an outside line, you must dial a Select Line Group number before you can use the star codes. For example, if your system is using the default Select Line Group numbers, dial 92001 to access that line. After you have dial tone, you can dial the star code and the number. I cannot use the Agent Help, Record- Contact your system administrator. a-Call, Station Monitor feature. I cannot program a Station Speed Dial number to the button I want. Before assigning the speed-dial number to a programmable button, you must store the number with either a Station or System Speed-Dial code. When I try to use the Dynamic Extension Express Handoff feature (388), the display shows NO CALL TO HANDOFF. The NO CALL TO HANDOFF display indicates that the call cannot be handed off from your mobile phone to your desk phone because one of the following may have occurred: You tried to use the handoff feature on a call that has not been routed by Dynamic Extension Express. You entered the handoff feature code at the exact time the other party on the call disconnected. The call on your mobile phone was terminated for some reason. Page 68 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Troubleshooting Problem Possible Solution When I try to use the Dynamic Extension Express – Handoff feature (388), the display shows NO CALL TO HANDOFF. The NO CALL TO HANDOFF display indicates that the call cannot be handed off because one of the following may have occurred: You tried to use the Handoff feature on a call that has not been routed by Dynamic Extension Express. You tried to use the Handoff feature on a call that the system has not yet recognized as a valid call. You tried to use the Handoff feature on an unsupported extension. The Handoff feature is supported on your main extension only. You tried to use the Handoff feature on a phantom extension. The Handoff feature is not supported on phantom extensions. You entered the handoff feature code at the exact time the other party on the call disconnected. The call was terminated for some reason. Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 69 Index Index A C About Your Telephone 2 Call Forward Access Codes 41 manual 35 Account Codes 30 system 35 Account Codes, using 30 using 35 ACD Hunt Group Wrap-Up Timer, stopping 62 Call Logging, using 44 ACD Hunt Groups Call Logs, using 44 logging in 61 Callback (Queuing the Telephone), requesting 25 logging out 62 Callback, requesting (queuing the telephone) 25 Ad Hoc Conference Calls Caller ID Information 34 dropping 39 displaying 34 ending 40 viewing 34 placing 39 transferring 39 Ad Hoc Conference Parties Calls answering 23 camping-on to telephone 25 adding 39 conference 39 placing on hold 40 conference, placing 39 Additional Programmable Buttons 16 emergency, placing 24 Agent ACD Hunt Group 61 external, placing 26 Agent Help accepting 64 rejecting 64 requesting 63 Agent Help, requesting 63 Angle adjusting 9 viewing 9 Audio Problems 68 Automatic access, using 23 call access, using 23 trunk answer, using 24 forwarding 35 logs, using 44 monitoring 64 muting the microphone 31 picking up (reverse transferring) 33 placing 24 placing internal (IC) 25 recording 43 redirecting 24 redirecting incoming 24 stealing 64 telephone, queuing for 25 transferring 33 waiting 23 Calls On Hold, placing 32 B Calls to External Numbers 33 transferring 33 Background Music background 12 listening 12 Barge-In, using 65 Button Assignments, viewing 20 Buttons, feature 4 Calls to Other Extensions, transferring 33 Camp-On, using 25 Characters, entering dialpad 13 Codes account 30 default system access 17 feature, default 17 Outgoing Call access 24, 26 Comfort and Safety Tips 6 Conference Assistant 41 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 71 Index Configuration Assistant 47, 49 accessing 48 DND settings, changing 49 Dynamic Extension Express settings, changing 48 Dynamic Extension Express, using 48 E Emergency Calls, placing 24 Error messages 67 manual call forwarding settings, changing 49 manual call forwarding, using 49 tones, telephone 6 meet-me conferencing access codes, managing 50 Error Messages 67 station passcode, changing 47 Extension Numbers 17 Contact Information 67 Contrast, changing 11 External Calls, placing 26 F D Feature buttons 4 Default canceling 4 access codes 17 codes, using 17 feature codes 17 programmable buttons, resetting to 20 Feature Buttons 4 settings, returning the telephone to 20 Features to Programmable Buttons, assigning 16 system access codes 17 Designation Cards, installing 10 G Dialing Station Speed-Dial Numbers 27 Dialpad buttons 4 characters, entering 13 Group Listen, using 43 H Dialpad Buttons 4 Dialpad Buttons to Enter Characters, using 13 Handoff - Push/Pull, using 37 Directory, using 29 Handset 3 Display 3 off-hook 6 contrast, changing 11 off-hook, on-hook 6 name, changing 68 on-hook 6 Display Contrast and Brightness, adjusting 11 Handsfree Mode 31 Display Contrast, adjusting 11 overriding 31 using 31 Diverting Hunt Group Calls 63 DND Settings, changing 49, 52 Headset Do-Not-Disturb (DND), using 57 instructions 7 Door Relay, activating 21 using 7 Dynamic Extension Express 36 enabling and disabling 36 handoff - push/pull 37 Hold Individual 32 System 32 message waiting indications, receiving 38 Hookflash, entering 32 using 36 Hot Desking, using 46 Dynamic Extension Express Settings, changing 48, 51 Hunt Group Calls diverting 63 stealing 64 Hunt Group Supervisor Features 64 Page 72 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Index Hunt Groups Messages accepting or rejecting Agent Help 64 at other extensions, leaving 55 Agent Help, requesting 63 canceling 56 agent IDs 61 deleting 56 Automatic Call Distribution (ACD) 61 Do-Not-Disturb 57 Barge-In, using 65 error 67 calls leaving 55 diverting 63 monitoring 64 stealing 64 left at other extensions, canceling 56 pages 59 Reminder 58 logging out of 62 replying to 56 types 61 responding 56 Uniform Call Distribution (UCD) 61 viewing 56 wrap-up timer 62 viewing and responding 56 voice, listening to 56 I Messages at Other Extensions, leaving 55 Messages Left at Other Extensions, canceling 56 Incoming Calls, redirecting 24 Microphone, muting 31 Individual Hold, using 32 Music, background 12 Internal Calls, placing 25 Mute, using 31 Inter-Station Messages, deleting 56 N K Numbers, redialing external 26 Keymaps changing 20 O switching 20 Off-Hook 6 L On-Hook 6 Other Hunt Group Features 63 Language, changing 12 Other System Users, paging 59 LCD contrast, changing 11 Outgoing Call Access Code 24, 26 Logs, call 44 Outside Line Access Codes 17 M P Manual Call Forwarding 35 Page Announcement, placing 59 Manual Call Forwarding Settings, changing 49, 52 Page Feature, enabling or disabling 59 Meet-Me Conferencing 41 Paging access codes 41 Conference Assistant 41 dropping 42 joining 42 putting on hold 42 setting up 41 transferring 42 Meet-Me Conferencing Access Codes, managing 50 Members, hunt group 61 Message Waiting Indications, receiving 38 enabling or disabling 59 other system users 59 using 59 Passcode, Remote Programming changing 53 entering 47 Programmable Buttons 5, 16 assigning 16 resetting 20 resetting to default values 20 viewing button assignments 20 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 73 Index R deleting 56 leaving 55 replying to 56 Record-A-Call, using 43 Redialing, external numbers 26 Reminder Messages, using 58 Remote Programming 47, 51 DND settings , using 49 viewing 56 Station Monitor, using 64 Station Passcode, changing 47, 53 Station Speed Dial 27 numbers deleting 28 dialing 27 storing 27 DND, using 52 Dynamic Extension Express, using 51 forward calls, using 48, 49 passcode changing 53 entering 47 using 27 Station Speed Dial Numbers dialing 27 station passcode, changing 53 to Change the Passcode, using 53 to Forward Calls, using 52 storing 27 System forwarding 35 Reverse Transfer (Call Pickup), using 33 hold 32 Ring Intercom Always, using 31 information, displaying 34 Ring Message Indicator 3 Ring Tone changing 11 selection 11 Ring/Message Indicator 3 time and date, setting 68 System Forwarding 35 System Information, viewing 34 System Speed Dial, using 27 T S Secondary Extension Buttons, using 45 Telephone 2 blank display 1 Settings, returning to default 20 changing volume levels 11 Signals, telephone 6 comfort and safety 6 Software Updates 5 default settings, returning to 20 Speaker 3 error tones 6 Speaker, external 3 features dialpad buttons 4 programmable buttons 16 Ring/Message Indicator 3 speaker 3 Speakerphone description 3 Group Listen, using 43 handsfree calls 31 ring tone, selecting 11 Speed Dial 27 signals 6 entries to Programmable Buttons, assigning 28 entries, deleting 28 Station, using 27 System, using 27 using 27 viewing angle, changing 9 Telephone Feature Descriptions 3 Telephone Signals 5, 6 Telephone to the Default Settings, resetting 20 Speed-Dial Numbers to Programmable Buttons, assigning 28 Telephone, queuing for 25 STAR Codes, telephone company 68 Time and Date, system 68 Station Messages Tips canceling 56 comfort and safety 6 troubleshooting 68 Page 74 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Index V W Voice Mail User Guides 55 Waiting Calls, answering 23 Voice Messages Welcome 1 deleting 56 Wrap-Up Timer, stopping 62 leaving 55 listening to 56 Volume Levels 11 Volume Levels, changing 11 Mitel® 8528 Telephone User Guide – Issue 3, February 2011 Page 75 Part No. 550.8032 Issue 3, February 2011 A661/9143A www.mitel.com Global Headquarters U.S. EMEA CALA Asia Pacific Tel: +1(613) 592-2122 Fax: +1(613) 592-4784 Tel: +1(480) 961-9000 Fax: +1(480) 961-1370 Tel: +44(0)1291-430000 Fax: +44(0)1291-430400 Tel: +1(613) 592-2122 Fax: +1(613) 592-7825 Tel: +61(0) 2 9023 9500 Fax: +61(0) 2 9023 9501 For more information on our worldwide office locations, visit our website at www.mitel.com/offices THIS DOCUMENT IS PROVIDED TO YOU FOR INFORMATIONAL PURPOSES ONLY. The information furnished in this document, believed by Mitel to be accurate as of the date of its publication, is subject to change without notice. Mitel assumes no responsibility for any errors or omissions in this document and shall have no obligation to you as a result of having made this document available to you or based upon the information it contains. M MITEL (design) is a registered trademark of Mitel Networks Corporation. All other products and services are the registered trademarks of their respective holders. © Copyright 2010, Mitel Networks Corporation. All Rights Reserved.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Copy, Annotate, Fill forms, Extract, Print high-res Author : Mitel Technical Publications - USA Create Date : 2011:02:15 15:23:23Z Modify Date : 2011:02:16 12:53:10-08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Title : Mitel 8528 Telephone User Guide Creator : Mitel Technical Publications - USA Creator Tool : FrameMaker 9.0 Metadata Date : 2011:02:16 12:53:10-08:00 Producer : Acrobat Distiller 9.4.2 (Windows) Document ID : uuid:1bb33a72-16f1-464d-b389-433880197d5e Instance ID : uuid:0232f467-93d7-4ebc-a9c1-e998ebd22d01 Page Mode : UseOutlines Page Count : 92 Signing Date : 2011:02:16 12:53:10-08:00 Signing Authority : ARE Acrobat Product v8.0 P23 0002337 Annotation Usage Rights : Create, Delete, Modify, Copy, Import, ExportEXIF Metadata provided by EXIF.tools