MitraStar Technology HGW-500BNA-QC Wireless Extender User Manual Statement

MitraStar Technology Corporation Wireless Extender Statement

Contents

User Manual Statement

IMPORTANT SAFETY INSTRUCTIONS
Before you install or use the apparatus, you must read and
understand these Important Safety Instructions. At all times
when using the apparatus you must follow these Important
and injury to persons.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Onl
manufacturer.
12. Use only with the cart, stand, tripod, bracket,
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Ref
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
In addition to the Important Safety Instructions,
please read the following Safety Information.
WARNINGS ON THE POWER SUPPLY UNIT
is intended to alert you to the presence of uninsulated
“dangerous” voltages within your device’s power supply unit
electric shock to persons.
The exclamation point within a triangle is intended to
alert you to the presence of important instructions in the
literature accompanying your device.
CONNECTING TO THE AC POWER SUPPLY
Always connect the cord from the power supply unit to
your device before you insert the power supply unit into
the wall socket-outlet.
To disconnect power from your device, always remove the
power supply unit from the wall socket-outlet (i.e. rather
than remove the cord from your device). Therefore you
must install your device near to the wall socket-outlet,
which should be easily accessible.
If you are in any doubt about the power supply cord,
its plug or its connection, or are not certain that the
electrical outlets you are using are properly wired
proceeding any further.
The model and serial number and electrical rating
of your device are on a label on its base.
CAUTION
• Do not attempt to modify your device without written
authorization from the manufacturer. Unauthorized
device.
• Failure to heed the Safety Information provided by
failing to connect to a properly wired outlet may void
the manufacturer’s warranty.
NOTE TO THE INSTALLER
This reminder is provided to call the attention of the
cable-TV-system installer to Section 820 of the National
Electrical Code (USA), which provides guidelines for proper
shall be connected to the grounding system of the building,
as close to the point of cable entry as is practical.
SAFETY INFORMATION
To reduce the risk of electric shock, do not remove the
cover of your device or its power supply unit.
There are no user-serviceable parts inside them.
Power sources
You must operate your device only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your dealer
or local power company.
Overloading
To avoid possible damage to your device or to a connected
TV or component, all AC power cords must be plugged
into properly wired outlets. As with all electrical products,
connection to faulty or defective components, or the failure
to connect your device to a properly wired outlet, may
cause sparking, property damage or damage to any TV or
hazard.
on or adjacent to your device.
Water and moisture
this device to rain or moisture.
Do not expose this device to dripping or splashing and
placed on your device.
Ambient temperature
The operating temperature range of your device is 32-
104 °F. If the ambient temperature around your device falls
outside this range, you must correct this in order for your
device to work correctly and safely. For example, if the
temperature is too high, switch on the air conditioning.
Ventilation
Maintain a minimum distance of 3 inches around your
Lightning Storms
For added protection for your device during a lightning
storm, or when it is left unattended and unused for long
periods of time, disconnect your device’s power cord. Also
disconnect the satellite dish, antenna or cable system, and
telecommunication line cord, from your device.
WIFI
Users should be advised that high-power radars are allocated
as primary users (i.e. priority users) of the bands 5250-
5350 MHz and 5470-5725 MHz and that these radars could
cause interference and/or damage to the LE-LAN device.
The device for operation in the band 5150-5250 MHz is
only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
SAVE THIS INFORMATION FOR FUTURE REFERENCE
© 2017 ARRIS Enterprises, LLC. All rights reserved. ARRIS provides this guide without warranty of any kind, implied or
expressed, including, but not limited to, the implied warranties of merchantability and tness for a particular purpose.
ARRIS may make improvements or changes in the product(s) described in this manual at any time.
DECLARATION OF CONFORMANCE
WARNING: This is a Class B product. In a domestic
environment this product may cause radio interference, in
which case the user may be required to take adequate
measures. Adequate measures include increasing the
physical distance between this product and other electrical
devices. Changes or modifications to this unit not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
United States: This device complies with Part 15 of the
FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the device.
• Increase the distance between the equipment being
interfered with and the device.
• Connect the device to an outlet on a circuit different from
the outlet to which the equipment being interfered with is
connected.
• Consult the retailer or an experienced radio/TV
technician for help.
FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate this equipment. This
transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Operations within the 5.15 ~ 5.25 GHz band are restricted
to indoor use only.
Radiation Exposure Statement: This equipment
complies with FCC radiation exposure limits as set forth for
an uncontrolled environment. This equipment should be
installed and operated maintaining a minimum distance of 20
cm between the device and your body.
Service Requirements: In the event of equipment
malfunction, if under warranty, we will exchange a product
deemed defective. Under FCC rules, no customer is
authorized to repair this equipment. This restriction applies
regardless of whether the equipment is in or out of
warranty.
Technical Support for Hardware Products:
Customers inside North America: 888-944-4357 (888-944-
HELP)
Customers outside North America: 1-215-323-2345
For Spanish language support: 1-215-323-2346
All ARRIS products are furnished under a license agreement
included with the product. If you are unable to locate a
copy of the license agreement, please contact ARRIS.
IMPORTANT: This product was tested for FCC
compliance under conditions that included the use of
shielded cables and connectors between system compo-
nents. Changes or modifications to this product not
authorized by the manufacturer could void your authority
to operate the equipment.

Navigation menu