Mitsubishi Electric X1T266IMB11104 Immobilizer System User Manual

Download:
Mirror Download [FCC.gov]
Document ID	839966
Application ID	jbYYxTkcJflEWw2Cf8ZLkQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5kB (62466 bits)
Date Submitted	2007-09-06 00:00:00
Date Available	2007-10-21 00:00:00
Creation Date	2007-06-07 11:58:39
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2007-08-10 11:31:30
Document Title	Users Manual
Document Creator	Word 用 Acrobat PDFMaker 5.0
Document Author:	姫路製作所

Immobilizer System User's Manual
USRSMANUAL_11104.DOC
Model：IMB111-04
1.
General
The immobilizer system is an electronic anti-theft system.
unauthorized starting such as hot-wiring, etc.
This system prevents the engine from
The engine would not start until the ID code registered
in the ignition key coincides with the code registered in the Engine Unit on the vehicle.
Transceiver
Engine ECU
Tester
Transponder key
Antenna Coil with
Transceiver
＋
Steering handle lock
(NOTE)The Tester is only used for
performing the transponder ID code
registration to the Engine ECU.
Major components and functions
Name
Function
Transponder
・Sends ID code to the Transceiver via key ring antenna.
Antenna Coil with
[Key ring antenna]
Transceiver
・Supplies power and sends / receives data to and from the transponder by means
of electromagnetic coupling.
[Transceiver]
・ Receives the ID code from the transponder and Send it to the Engine ECU.
Engine ECU
[Functions related to the immobilizer system]
・Receives the ID code from the Transceiver and compares it with the code
registered in the Engine ECU and operates to prepare / prohibit the start
of the engine.
Handling precaution
(1)
When starting the engine, keep metal objects (iron, etc.), electric equipment (cellular phone, electric
razor, etc.) and other immobilizer keys away from the steering handle lock.
(2)
Never damage the plastic key bow with a knife or fill transponder or similar articles inside.
USRSMANUAL_11104.DOC
Model：IMB111-03
2.
System operation
(1)
Operation start
When the ignition key is turned to the ON position, battery power is supplied to the Engine ECU and
Transceiver.
(2)
Sending to the transponder (the Engine ECU to Transponder)
The Engine ECU sends electromagnetic wave to the transponder via key ring antenna and Transceiver
to supply power and send the data to the transponder by means of electromagnetic coupling.
(3)
Sending ID code (Transponder to the Engine ECU through the Transceiver)
The transponder sends the ID code to the Engine ECU via the key ring antenna and the Transceiver.
(4)
Comparison of ID code
The ID code sent from the transponder is compared with the ID code registered in the Engine ECU.
(5)
Engine start
When the comparison result of ID code is coincident, turning the ignition key to the START position
can start the Engine.
Note:
(1)
Transponder ID code registration to the Engine ECU is performed using the Tester.
The transponder
key has individual ID code and a maximum of 8 types of codes (8 keys) can be registered to the Engine
ECU.
(U.S.A.)
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
FCC WARNING
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
(CANADA)
This device complies with RSS-210 of Industry CANADA. Operation is
subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2007:08:10 11:31:30+09:00
Create Date                     : 2007:06:07 11:58:39+09:00
Page Count                      : 3
Creation Date                   : 2007:06:07 11:58:39+09:00
Mod Date                        : 2007:08:10 11:31:30+09:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : 姫路製作所
Metadata Date                   : 2007:08:10 11:31:30+09:00
Creator                         : 姫路製作所
Title                           : イモビライザシステム－ユーザーズ・マニュアル
Page Mode                       : UseNone
Tagged PDF                      : No

EXIF Metadata provided by EXIF.tools