Mitsubishi Electronics Electric 3Dc 100S Users Manual
Mitsubishi Electric 3DC-100S 3DC-100S_IB
3DC-100S to the manual b8cace65-e377-4cd8-a00e-92b5a2ffe1e3
2015-02-09
: Mitsubishi-Electronics Mitsubishi-Electronics-Mitsubishi-Electric-3Dc-100S-Users-Manual-556831 mitsubishi-electronics-mitsubishi-electric-3dc-100s-users-manual-556831 mitsubishi-electronics pdf
Open the PDF directly: View PDF 
.
Page Count: 16
| Download | |
| Open PDF In Browser | View PDF |
3D Starter Pack MODEL 3DC-100S OWNER’S GUIDE For questions: -- Visit our website at www.mitsubishi-tv.com. -- E-mail us at TVSupport@mevsa.com. -- Call Consumer Relations at 800-332-2119 for operational or connection assistance. To order replacement or additional remote controls or other accessories, visit our website at www.mitsuparts.com or call 800-553-7278. 2 Important Safety Instructions 1) 2) 3) 4) 5) 6) 7) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8) Only use attachments/accessories specified by the manufacturer. 9) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. FCC Information Product: 3D Adapter Model: 3DC-100S Responsible Party: Mitsubishi Electric Visual Solutions America, Inc. 9351 Jeronimo Rd. Irvine, CA 92618-1904 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communi- cations. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. WARNING. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Please check www.mitsubishi-tv.com for updates on 3D signals and safety. 3 Features • • • • • Converts 3D video originating in several popular formats to checkerboard format for display on your 3D or 3D-ready Mitsubishi television or 3D-ready Samsung DLP television. Processes side-by-side, top-and-bottom, and frame-packing 3D (e.g., Blu-ray 3D) formats. Passes 2D images unaltered for normal display. Includes two pairs of active-shutter 3D glasses and matching IR emitter. Compatible with these Mitsubishi television models: 3D-Ready Televisions (2007 through 2010) 833 series (2007) C8 series (2008) 735 series (2008) 736 series (2008) 835 series (2008) L65-A90 (2008) 737 series (2009) 837 series (2009) C9 series (2009) L75-A81 (2010) 3D Televisions (starting in 2010) 738 series (2010) 838 series (2010) L75-A91 (2010) 638 series (2010) C10 series (2010) Use and Compatibility The Mitsubishi 3D Adapter, Model 3DC-100S may be used to display 3D content only when connected to a Mitsubishi 3D-Ready DLP TV, Samsung 3D –Ready DLP TV or a Mitsubishi 3D TV. When using the Mitsubishi 3D adapter, a 3D source device connected to the Mitsubishi 3D adapter is required to support the display of 3D games, 3D broadcasts from terrestrial/cable/satellite and 3D Blu-ray disc content. Mitsubishi 738 and 838 Series TVs with software version of 012.06 or higher do not require the use of the adapter for HDMI 1.4a mandatory 3D signals. For assistance call 1(800) 332-2119 4 Samsung 3D Ready DLP TVs Compatibility with 3DC-100S Adapter Mitsubishi has tested the 3DC-100S with representative models from several series of Samsung 3D-Ready DLP HDTVs. Mitsubishi has not tested all Samsung 3D-Ready DLP HDTV models or series and cannot guarantee compatibility with non-tested models or series. Samsung 3D-Ready Plasma TVs are not compatible with the 3DC-100S. 650 Series 87 Series Tested Model: HL61A650C1F Tested Model: HL-T5687S Other Models: HL50A650C1F Other Models: HL-T5087S HL56A650C1F HL-T6187S HL72A650C1F 88 Series (not tested) 750 Series HL-T7288S Tested Model: HL61A750A1F Other Model: HL67A750A1F 89 Series (not tested) HL-T5089S 75 Series Tested Model: HL-T5075S HL-T5689S HL-T6189S Other Models: HL-T4675S HL-T5675S 76 Series Tested Model: HL-T6176S Other Models: HL-T5076S HL-T5676S The Samsung models listed here are models that have been tested at the time of printing. Normally all models from the same series will operate the same way and have the same compatibility. Mitsubishi continues to test additional models when they are available. For updates to the list of tested models, please check the Owner’s Guide for the 3DC-100S on line at www.mitsubishi-tv.com. Please check www.mitsubishi-tv.com for updates on 3D signals and safety. 5 3D Adapter Battery Installation The remote control requires one CR2025 lithium battery. To remove the battery, press on the retaining clip. 1 2 Emitter 1. Remove the cover. 2. Insert the battery, positive side up. Be sure the retaining clip holds the battery securely. 3. Reinstall the cover. Lithium Battery Safety This product uses CR2025 Li/MnO2 lithium coin batteries. WARNING: Lithium coin cell batteries pose a serious risk of injury if ingested. Keep cells out of reach of children. If ingested immediately contact a physician or the National Poison Center at 202-625-3333. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type (CR2025). CAUTION: Risk of fire and burns. Do not recharge, disassemble, heat above 100˚ C (212˚ F), or incinerate. Keep battery out of reach of children. Disposal. Dispose of used batteries promptly according to local recycling or waste regulations. 3D STATUS IR Sensor POWER 3D MODE Adapter 3D MODE POWER POWER Controls and Indicators Remote Control POWER Light Lit when power is on. 3D STATUS Light Lit during 3D signal processing. POWER Button Allows manual override of auto on/off. Press to power off the Adapter if it powers on when not needed, 3D MODE Button Allows manual selection of 3D format conversion. For assistance call 1(800) 332-2119 6 Connecting the Adapter Connecting a Single 3D Video Source • • • • Power off all devices prior to connecting the Adapter. If the device was in use prior to adding the Adapter, use the same TV input if possible. On a Mitsubishi 833 series TV, the input must be named Game. For Samsung TVs, use the input labelled HDMI/DVI. You may need to name the input PC. See your Samsung owner’s guide for details. Step 1. HDMI OUT 3D GLASSES EMITTER OUT AC power adapter (provided) 5V DC 2A 3D GLASSES EMITTER IN HDMI IN 5V DC 2A Step 2. HDMI OUT 3D GLASSES EMITTER OUT DIN cable (provided) 5V DC 2A 3D GLASSES EMITTER IN 3D GLASSES EMITTER OUT TV HDMI IN 3D GLASSES EMITTER IN Step 3. HDMI OUT 3D GLASSES EMITTER Emitter (provided) 5V DC 2A 3D GLASSES EMITTER IN HDMI IN 3D GLASSES EMITTER OUT Step 4. Power on the TV. Step 5. HDMI OUT 3D GLASSES EMITTER OUT 5V DC 2A 3D GLASSES EMITTER IN HDMI input HDMI cable (provided) HDMI IN TV HDMI OUT Step 6. Power on the source device. HDMI cable Step 7. HDMI OUT 3D GLASSES EMITTER OUT 5V DC 2A 3D GLASSES EMITTER IN HDMI IN HDMI IN Source device Please check www.mitsubishi-tv.com for updates on 3D signals and safety. 7 Connecting the Adapter, continued Connecting Multiple 3D Video Sources • • Connect devices with checkerboard output directly to the TV. Enable checkerboard output from the devices if needed. If using a newer A/V receiver, you may be able to connect devices to the A/V receiver as shown below. The A/V receiver must support HDMI 1.4 and 3D video capabilities. HDMI cables Source devices A/V receiver HDMI cables Adapter TV Notice Concerning Samsung 720p TVs The adapter is not fully compatible with an A/V receiver when used with Samsung 720p TVs (models HL-T4675S, HL-T5075S, HL-T5675S). Always connect the 3D source device directly to the 3DC-100S adapter if using one of these TV models. For assistance call 1(800) 332-2119 8 Using the Adapter 1. Position the emitter where there will be a 2. clear path to the 3D glasses. Power on the TV, the 3D video device, and the 3D glasses. Note: The 3D video device must be powered on before the 3D Adapter can power on. 3. If the 3D Adapter does not power on automatically when you power 4. 5. 6. 7. on the 3D video device, press the POWER button. Mitsubishi TV only. If the New Input Found screen displays, assign a name to the input. If you have an 833 series TV, name the input Game. Start video from the 3D video device and wait a few moments for an image to appear. Enable the TV’s 3D mode. For a Mitsubishi 833 series TV, 3D settings are in the FX Gaming menu. If you have a Samsung TV, see the TV owner’s guide. Select the Adapter’s 3D mode. Press the 3D MODE button to change. • For ordinary 2D signals, keep the Adapter powered on and use 3D Mode Normal. • For automatic detection of HDMI 1.4a 3D signals, use 3D Mode Normal. • For non-HDMI 1.4a 3D signals, press the 3D MODE button repeatedly until the picture appears correct. Picture Troubleshooting Blurry double image, checkerboard format. Turn on TV’s 3D mode. Press 3D MODE button to select 3D Mode Normal. Two images, top-andbottom format. Press 3D MODE button to select 3D Mode for top/bottom. Two images, side-byside format. Press 3D MODE button to select 3D Mode for side-by-side. Please check www.mitsubishi-tv.com for updates on 3D signals and safety. 9 3D Glasses 3D active LCD shutter glasses enable you to view 3D images when used with the matching IR emitter and a compatible 3D-ready TV. Power Button Battery Cover LCD Shutter Lens LED Indicator Emitter LED Lit when TV is in 3D mode. Battery Installation • • • Each pair of glasses requires one CR2025 lithium battery. A continuously blinking red LED indicates low battery power. Install a new battery. See lithium-battery safety information at the front of this booklet. Open the cover. Remove the old battery if present. Insert a new Close the cover. battery, positive (+) side facing out. For assistance call 1(800) 332-2119 10 Using the 3D Glasses 3D Glasses Operation 1. Turn on 3D Mode in the TV and 3D source device. 2. Press the POWER button on the glasses to turn on the glasses. 3. When the 3D program is complete, turn off 3D mode in the TV and 3D source device and turn off the glasses. On Operating Range Be from 5 to 20 feet away. Press POWER button. The red LED will light for three seconds. Off 5 ft. 20 ft. 50° 50° Hold POWER button for about two seconds. Red LED will blink three times. Notes On the 3D Glasses • • • • • • • Shut off 3D glasses when not in use to extend battery life. Fluorescent and halogen lighting can cause the 3D glasses to flicker. Turn off these lamps if flickering occurs. Turning off the TV’s 3D mode or changing the TV’s input to a 2D input will turn off the IR emitter; the glasses will turn off automatically after two minutes. Moving out of range of the IR emitter for more than two minutes will cause the glasses to turn off automatically. Interference from other IR sources, such as motion detection devices, may cause the glasses to flicker or work intermittently. Turn off other IR source if interference occurs. The IR emitter in this system can also be used with Samsung 3D glasses model SSG-2100AB. Information about these glasses can be obtained from Samsung USA at www.samsung.com/usa/. You can also check www.mitsubishi-tv.com for any updates about compatible glasses. Please check www.mitsubishi-tv.com for updates on 3D signals and safety. 11 Cleaning Instructions • • • • To avoid scratching the glasses, use only standard glasses lens cleaning cloth, microfiber cloth, or a soft non-scratching cloth such as cotton flannel. Make sure the cloth is clean and free of any foreign material that may scratch the glasses. Cloths pre-moistened with cleaning solutions designed specifically for eye glasses can be used, however, do not spray solutions directly on the glasses. DO NOT spray any cleaner directly onto the any surface of the glasses. This may result in fire, electric shock, damage to the product surface, or removal of control labels. DO NOT use chemicals containing alcohol, solvents, surfactants, wax, benzene, thinners, insect repellents, lubricants, or household cleaners. These may result in discoloration, removal of control labels, or cracks to the product surfaces. Caution • • Do not place the product in a location exposed to direct sunlight, heat, fire, or water. This may result in product malfunction or fire. Do not apply force to the lenses of the 3D glasses. Do not drop or bend the product. This may result in product malfunction. Troubleshooting If you encounter . . . Try this . . . My 3D glasses do not operate • • • The LED blinks continually. Replace the battery if it is drained. Focus your 3D glasses toward the TV front. Make sure that the distance from the TV to the glasses is less than 20 feet in a straight line. Check if the emitter LED is lit. If not, make sure the TV’s 3D mode is turned on and the emitter is plugged in. The battery is drained. Replace it with a new one. For assistance call 1(800) 332-2119 12 3D Safety Requirements • 3D Glasses are NOT designed as sunglasses or safety glasses and do not provide protection. 3D glasses should be worn only when viewing 3D material. • Do not wear the wireless glasses in any situations that require unimpaired visual perception. • Children under the age of 5 should not view 3D programming. Under normal conditions, 3D viewing is safe for your movies or games. Some people may experience discomfort, however. To minimize the potential for experiencing visual problems or any adverse symptoms: • Read and follow any and all safety warnings that accompany your 3D glasses or 3D source devices. • Maintain a distance of no less than 2 to 2.5 times the screen height measurement away from the display. Viewing from too short a distance can strain your eyes. • Take regular breaks, at least 5 minutes after every hour of 3D viewing. If you experience any of the following symptoms, discontinue 3D viewing until the symptoms go away: • nausea, dizziness, or queasiness, • headache, or eyestrain, • blurry vision, • double vision that lasts longer than a few seconds, Do not engage in any potentially hazardous activity (for example, driving a vehicle) until your symptoms have completely gone away. If symptoms persist, discontinue use and do not resume 3D viewing without discussing your symptoms with a physician. Do not use the glasses where loss of balance or limiting your field of vision may be dangerous to you. Do not use near staircases, ledges or balconies. You may risk falling during or after use. Epilepsy WARNING! IF YOU OR ANY MEMBER OF YOUR FAMILY HAS A HISTORY OF EPILEPSY, CONSULT A PHYSICIAN BEFORE USING 3D VIDEO OR GAME PRODUCTS. A small percentage of the population may experience epileptic seizures when viewing certain types of TV images or video games that contain flashing patterns of light. The following people should consult a physician before viewing 3D Games or Video: • Anyone with a history of epilepsy, or who has a family member with a history of epilepsy • Anyone who has ever experienced epileptic seizures or sensory disturbances triggered by flashing light effects. WARNING! SOME LIGHT PATTERNS MAY INDUCE SEIZURES IN PERSONS WITH NO PRIOR HISTORY OF EPILEPSY. DISCONTINUE 3D VIEWING IF YOU EXPERIENCE ANY OF THE FOLLOWING SYMPTOMS: • Involuntary movements, eye or muscle twitching • Muscle cramps • Nausea, dizziness, or queasiness • Convulsions • Disorientation, confusion, or loss of awareness of your surroundings Do not engage in any potentially hazardous activity (for example, driving a vehicle) until your symptoms have completely gone away. Do not resume 3D viewing without discussing the symptoms with your physician. Please check www.mitsubishi-tv.com for updates on 3D signals and safety. 13 Mitsubishi Model 3DC-100S 3D Starter Kit Limited Warranty MITSUBISHI ELECTRIC VISUAL SOLUTIONS AMERICA, INC. (“MEVSA”) warrants as follows to the original purchaser of this 3D Starter Kit from an authorized MITSUBISHI Audio/Video Dealer, should the adapter, glasses, IR emitter, remote control or included accessories prove defective by reasons arising from improper workmanship and/or material: a. Length of Warranty. The Starter Kit including the 3D adapter, 3D glasses and IR emitter and all included parts, except for “consumable parts” such as batteries, are warranted for a period of one (1) year from the date of the original purchase at retail. We will repair or replace, at our option, any defective part without charge. Parts used for replacement may be replaced with those of like kind and quality and may be new or remanufactured. Parts used for replacement are warranted for the remainder of the original warranty period. b. Send In Service. MEVSA provides send in service only. The owner is responsible for packaging the full kit or parts for repair safely and the shipping costs to the MEVSA designated service location. MEVSA will repair or replace and return the items without charge for return shipping. c. Notice. To obtain warranty service, you must notify Mitsubishi Electric Visual Solutions America, Inc. of any defect within the applicable warranty time period. BEFORE REQUESTING SERVICE, please review the instruction booklet to insure proper installation and correct customer control adjustment. If the problem persists please arrange for warranty service. 1. TO OBTAIN WARRANTY SERVICE: a. Contact Mitsubishi Electric Visual Solutions America, Inc. (MEVSA) by calling 800-332-2119. The Consumer Relations Representative at this phone number will provide you with the details AND, when necessary, authorizations for the return of the kit or parts for repair. DO NOT send the product or part for repair without the proper authorizations. b. Proof of purchase date from an authorized MITSUBISHI dealer is required when requesting warranty service. Present your sales receipt or other document which establishes proof and date of purchase upon request by MEVSA. THE RETURN OF THE OWNER REGISTRATION CARD IS NOT A CONDITION OF COVERAGE UNDER THIS LIMITED WARRANTY. However, please return the Owner Registration Card so that we can contact you should a question of safety arise which could affect you. 2. THIS LIMITED WARRANTY DOES NOT COVER: a. Consumable parts such as batteries, 3D Glasses and IR Emitters that were not sold as a part of the Starter Kit (refer to the instructions for the separately purchased glasses and IR Emitter for warranty details), cosmetic damage or any other damage where such damage is caused by unauthorized modification, alteration, repairs to or service of the product by anyone other than an autho- For assistance call 1(800) 332-2119 14 rized MITSUBISHI service center; physical abuse to or misuse of the product (including any failure to carry out any maintenance as described in the Owner’s Guide or any product damaged by excessive physical or electrical stress); any products that have had a serial number or any part thereof altered, defaced or removed; product use in any manner contrary to the Owner’s Guide; freight damage; or any damage caused by acts of God or other factors beyond the reasonable control of MEVSA, such as power surge damage caused by electrical system or lightning. This limited warranty also excludes service where no defect in the product covered under this warranty is found, service related to unsatisfactory audio or visual reception or signal unless caused by a defect in the product that is covered under this limited warranty, all costs, expenses or any other damages arising from product installation, or set-ups, any adjustments of user controls (including contrast, brightness, color, tint, fine tuning, sharpness to the connected TV), other adjustment necessary to prepare the unit for display or use, connection with any external audio receiver, antenna, cable or satellite systems, or service of products purchased or serviced outside the U.S.A. Please consult the operating instructions contained in the Owner’s Guide furnished with the product for information regarding user controls. 3. ANY EXPRESS WARRANTY NOT PROVIDED HEREIN, AND ANY REMEDY WHICH, BUT FOR THIS PROVISION, MIGHT ARISE BY IMPLICATION OR OPERATION OF LAW, IS HEREBY EXCLUDED AND DISCLAIMED. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR ANY PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO A TERM OF ONE YEAR. 4. UNDER NO CIRCUMSTANCES SHALL MEVSA BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT, OR OTHERWISE. 5. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental, special, or consequential damages, so the above limitations or exclusions may not apply to you. 6. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. MITSUBISHI ELECTRIC VISUAL SOLUTIONS AMERICA, INC. 9351 Jeronimo Road Irvine, CA 92618-1904 Please check www.mitsubishi-tv.com for updates on 3D signals and safety. 3DC-100S © 2011 Mitsubishi Electric Visual Solutions America, Inc. 853B710B80
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00 Instance ID : uuid:d3ba5170-2f45-429e-bf3d-d3188a422898 Document ID : xmp.did:251B98256B6FE0119250FD87214E391A Original Document ID : adobe:docid:indd:8867c5e2-cff7-11df-b6dd-82fe2992c1a2 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:7448BF366A6FE0119250FD87214E391A Derived From Document ID : xmp.did:E5B55C67836BE0118EDCEC422CF42E45 Derived From Original Document ID: adobe:docid:indd:8867c5e2-cff7-11df-b6dd-82fe2992c1a2 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:78F970068FE7DF118886ACF51EE55008, xmp.iid:79F970068FE7DF118886ACF51EE55008, xmp.iid:7AF970068FE7DF118886ACF51EE55008, xmp.iid:7BF970068FE7DF118886ACF51EE55008, xmp.iid:DB02C9C132ECDF119BE482EF35304E66, xmp.iid:DC02C9C132ECDF119BE482EF35304E66, xmp.iid:36AD64D037ECDF119BE482EF35304E66, xmp.iid:EABB7E2B38ECDF119BE482EF35304E66, xmp.iid:3FB9045814EDDF11B8EAD03C604F7101, xmp.iid:3D7E47D514EDDF11B8EAD03C604F7101, xmp.iid:6354AE0417EDDF11B8EAD03C604F7101, xmp.iid:6454AE0417EDDF11B8EAD03C604F7101, xmp.iid:F393082517EDDF11B8EAD03C604F7101, xmp.iid:6CF50A2517EDDF11B8EAD03C604F7101, xmp.iid:6DF50A2517EDDF11B8EAD03C604F7101, xmp.iid:6EF50A2517EDDF11B8EAD03C604F7101, xmp.iid:6FF50A2517EDDF11B8EAD03C604F7101, xmp.iid:50A2F25719EDDF11B8EAD03C604F7101, xmp.iid:51A2F25719EDDF11B8EAD03C604F7101, xmp.iid:52A2F25719EDDF11B8EAD03C604F7101, xmp.iid:53A2F25719EDDF11B8EAD03C604F7101, xmp.iid:54A2F25719EDDF11B8EAD03C604F7101, xmp.iid:55A2F25719EDDF11B8EAD03C604F7101, xmp.iid:D3C9F2A228EDDF11B8EAD03C604F7101, xmp.iid:D03B2B5BDEF1DF11A174EA4392FC7FEA, xmp.iid:4026375BDEF1DF11A174EA4392FC7FEA, xmp.iid:4126375BDEF1DF11A174EA4392FC7FEA, xmp.iid:2936842A7BF2DF11A0D6F01464C74D7B, xmp.iid:B229952D7BF2DF11A0D6F01464C74D7B, xmp.iid:B329952D7BF2DF11A0D6F01464C74D7B, xmp.iid:ED50A2604DF3DF11B291E00A1640E806, xmp.iid:CDC8AA6A71F3DF11BF98D3C73500157F, xmp.iid:93CB03478CF6DF119FB2916768FFD3A3, xmp.iid:FD51215D8CF6DF119FB2916768FFD3A3, xmp.iid:15362F6E8CF6DF119FB2916768FFD3A3, xmp.iid:FA24F1BD8DF6DF119FB2916768FFD3A3, xmp.iid:897DCA378EF6DF119FB2916768FFD3A3, xmp.iid:01076E638EF6DF119FB2916768FFD3A3, xmp.iid:02076E638EF6DF119FB2916768FFD3A3, xmp.iid:03076E638EF6DF119FB2916768FFD3A3, xmp.iid:D302A6DA93F6DF119FB2916768FFD3A3, xmp.iid:D402A6DA93F6DF119FB2916768FFD3A3, xmp.iid:4784E9F393F6DF119FB2916768FFD3A3, xmp.iid:4884E9F393F6DF119FB2916768FFD3A3, xmp.iid:35B3BE4B95F6DF119FB2916768FFD3A3, xmp.iid:301ACA4F95F6DF119FB2916768FFD3A3, xmp.iid:311ACA4F95F6DF119FB2916768FFD3A3, xmp.iid:321ACA4F95F6DF119FB2916768FFD3A3, xmp.iid:331ACA4F95F6DF119FB2916768FFD3A3, xmp.iid:D524014097F6DF119FB2916768FFD3A3, xmp.iid:D624014097F6DF119FB2916768FFD3A3, xmp.iid:0FDD5C6049F7DF119CC6D162F05E9205, xmp.iid:10DD5C6049F7DF119CC6D162F05E9205, xmp.iid:BACB4F05D7FCDF119603CF1058C755A3, xmp.iid:BBCB4F05D7FCDF119603CF1058C755A3, xmp.iid:BCCB4F05D7FCDF119603CF1058C755A3, xmp.iid:BDCB4F05D7FCDF119603CF1058C755A3, xmp.iid:AFDD406FD7FCDF119603CF1058C755A3, xmp.iid:169EECE5D7FCDF119603CF1058C755A3, xmp.iid:DD641D13D8FCDF119603CF1058C755A3, xmp.iid:DE641D13D8FCDF119603CF1058C755A3, xmp.iid:4CADFC7DD8FCDF119603CF1058C755A3, xmp.iid:4DADFC7DD8FCDF119603CF1058C755A3, xmp.iid:4EADFC7DD8FCDF119603CF1058C755A3, xmp.iid:17511DA7D8FCDF119603CF1058C755A3, xmp.iid:83EDD3A8E0FCDF119603CF1058C755A3, xmp.iid:84EDD3A8E0FCDF119603CF1058C755A3, xmp.iid:C3DF6A66826BE0118EDCEC422CF42E45, xmp.iid:E5B55C67836BE0118EDCEC422CF42E45, xmp.iid:469B61B4846BE0118EDCEC422CF42E45, xmp.iid:479B61B4846BE0118EDCEC422CF42E45, xmp.iid:595F46668D6BE0118EDCEC422CF42E45, xmp.iid:5A5F46668D6BE0118EDCEC422CF42E45, xmp.iid:7448BF366A6FE0119250FD87214E391A, xmp.iid:251B98256B6FE0119250FD87214E391A History When : 2010:11:03 14:12:11-07:00, 2010:11:03 14:12:11-07:00, 2010:11:03 14:12:36-07:00, 2010:11:03 14:12:36-07:00, 2010:11:09 10:54:18-08:00, 2010:11:09 10:54:18-08:00, 2010:11:09 11:30:30-08:00, 2010:11:09 11:33:03-08:00, 2010:11:10 13:49:07-08:00, 2010:11:10 13:52:37-08:00, 2010:11:10 14:08:16-08:00, 2010:11:10 14:08:16-08:00, 2010:11:10 14:09:10-08:00, 2010:11:10 14:09:10-08:00, 2010:11:10 14:09:57-08:00, 2010:11:10 14:09:57-08:00, 2010:11:10 14:23:25-08:00, 2010:11:10 14:24:54-08:00, 2010:11:10 14:25:54-08:00, 2010:11:10 16:13:09-08:00, 2010:11:10 16:13:56-08:00, 2010:11:10 16:13:56-08:00, 2010:11:10 16:14:23-08:00, 2010:11:10 16:14:23-08:00, 2010:11:16 16:05:15-08:00, 2010:11:16 16:05:15-08:00, 2010:11:16 16:10:18-08:00, 2010:11:17 10:47:45-08:00, 2010:11:17 10:47:50-08:00, 2010:11:17 10:47:50-08:00, 2010:11:18 11:52:30-08:00, 2010:11:18 16:10:29-08:00, 2010:11:22 15:00:19-08:00, 2010:11:22 15:00:56-08:00, 2010:11:22 15:01:24-08:00, 2010:11:22 15:10:48-08:00, 2010:11:22 15:14:12-08:00, 2010:11:22 15:15:25-08:00, 2010:11:22 15:15:25-08:00, 2010:11:22 15:54:20-08:00, 2010:11:22 15:54:33-08:00, 2010:11:22 15:54:33-08:00, 2010:11:22 15:55:15-08:00, 2010:11:22 15:55:15-08:00, 2010:11:22 16:04:52-08:00, 2010:11:22 16:04:59-08:00, 2010:11:22 16:04:59-08:00, 2010:11:22 16:06:52-08:00, 2010:11:22 16:06:52-08:00, 2010:11:22 16:18:51-08:00, 2010:11:22 16:18:51-08:00, 2010:11:23 13:33:56-08:00, 2010:11:23 14:03:21-08:00, 2010:11:30 15:10:28-08:00, 2010:11:30 15:10:28-08:00, 2010:11:30 15:11:54-08:00, 2010:11:30 15:11:54-08:00, 2010:11:30 15:16:44-08:00, 2010:11:30 15:16:45-08:00, 2010:11:30 15:18-08:00, 2010:11:30 15:18-08:00, 2010:11:30 15:21-08:00, 2010:11:30 15:21-08:00, 2010:11:30 15:22:09-08:00, 2010:11:30 15:22:09-08:00, 2010:11:30 16:19:27-08:00, 2010:11:30 16:19:27-08:00, 2011:04:20 12:21:33-07:00, 2011:04:20 12:21:34-07:00, 2011:04:20 12:30:52-07:00, 2011:04:20 12:30:52-07:00, 2011:04:20 13:33:07-07:00, 2011:04:20 13:33:07-07:00, 2011:04:25 11:38-07:00, 2011:04:25 11:38-07:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /;/metadata, /metadata, /metadata, /, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /metadata, /, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /metadata, /;/metadata, /;/metadata, /metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /metadata, /;/metadata Create Date : 2011:04:25 11:42:49-07:00 Modify Date : 2011:04:25 11:42:51-07:00 Metadata Date : 2011:04:25 11:42:51-07:00 Creator Tool : Adobe InDesign CS5 (7.0.2) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 6889 bytes, use -b option to extract), (Binary data 9912 bytes, use -b option to extract) Doc Change Count : 948 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 16 Creator : Adobe InDesign CS5 (7.0.2)EXIF Metadata provided by EXIF.tools