Mitsubishi Electronics Tg 2000A Users Manual

2015-02-09

• Title
• Contents
• 1. Safety Precautions
• 2. System Requirements
  • 2.1 Requirements (system recommendations)
  • 2.2 Compatible Units
  • 2.3 Restrictions
  • 2.4 Other Devices
• 3. System Configuration
  • 3.1 System Configuration Example
  • 3.2 Hardware Connection Diagram
• 4. Flow of Site Adjustment
  • 4.1 Flow of Site Adjustment
  • 4.2 Tools for Site Adjustment
  • 4.3 Step 1: Test operation from centralized controller G-50A
  • 4.4 Step 2: Initial setting of integrated centralized control software TG-2000A
  • 4.5 Step 3: Test operation from integrated centralized control software TG-2000A
• 5. Installation
  • 5.1 Pre-installation Steps
  • 5.2 TG-2000A Setup
  • 5.2.1 Setup
    • 5.2.2 Running TG-2000A Setup (New setup)
    • 5.3 TG-2000A Uninstall
• 6. Part Names and Functions
  • 6.1 Window Elements
  • 6.2 Basic Mouse Operation
  • 6.3 Accessing Functions and Moving between Windows
• 7. Initial Startup and Shutdown
  • 7.1 Before Startup
  • 7.2 Startup
  • 7.3 Shutdown
• 8. System Setting Procedure
  • 8.1 System Setting Screen
  • 8.2 System Setting Procedure
  • 8.3 User Set-up
    • 8.3.1 General Operation
    • 8.3.2 Connection Setting
    • 8.3.3 Reliability Function
    • 8.3.4 Energy Monitoring Related
  • 8.4 Site Name Set-up
  • 8.5 G-50 Connection Set-up
    • 8.5.1 Setting Procedure and Restrictions
    • 8.5.2 Number of G-50A set-up (Step 1)
    • 8.5.3 IP address of G-50A set-up (Step 2)
  • 8.6 System Configuration Set-up
    • 8.6.1 Setting Procedure and Restrictions
    • 8.6.2 G-50A data collection (Step 1)
    • 8.6.3 Unit composition set-up (Step 2)
    • 8.6.4 Set-up of refrigerant system (Step 3)
    • 8.6.5 Set-up of group (Step 4)
    • 8.6.6 Interlocked setting (Step 5)
  • 8.7 Monitoring Screen Set-up
    • 8.7.1 Configuration Procedure and Restrictions
    • 8.7.2 Set-up of model name (Step 1)
    • 8.7.3 Set-up of the number of floors, and floor name (Step 2)
    • 8.7.4 Creation of a plane view (Step 3)
    • 8.7.5 Set-up of floor name and G-50 (Step 4)
    • 8.7.6 Set-up of icon arrange and name (Step 5)
    • 8.7.7 Set-up of block (Step 6)
  • 8.8 Watt Hour Meter Set-Up
    • 8.8.1 Setting Procedures and Restrictions
    • 8.8.2 Watt Hour Meter Setting (Step 1)
    • 8.8.3 Set-up for the Name and the Maximum Integrated Value of WHM (Step 2)
  • 8.9 Energy Monitoring Set-up
    • 8.9.1 Setting Procedures and Restrictions
    • 8.9.2 Division mode (Step 1)
    • 8.9.3 Relation between outdoor units and watt hour meters (Step 2)
    • 8.9.4 Electrical specification of outdoor units (Step 3)
    • 8.9.5 Relation between indoor units and watt hour meters (Step 4)
    • 8.9.6 Electrical specification of indoor units (Step 5)
    • 8.9.7 Charge Blocks (Step 6)
    • 8.9.8 Currency unit set (Step 7)
    • 8.9.9 Charge set (Step 8)
    • 8.9.10Standard charge set (Step 9)
  • 8.10 Time Set-up
  • 8.11 Password Set-up
• 9. Charge Data Correction and Remedy
  • 9.1 Result of Air-conditioning Charge Calculation
  • 9.2 Maintenance of Charge Data
  • 9.2.1 Preparing for Charging Data Maintenance
    • 9.2.2 Maintenance Methods and Restrictions
    • 9.2.3 Unit Data Maintenance
    • 9.2.4 Watt Hour Meter Data Maintenance
    • 9.2.5 Verify Test Operation of Watt Hour Meter
  • 9.3 Operation Amount Data Monitoring
  • 9.4 Charge Parameter Output
  • 9.5 Charging Remedy
    • 9.5.1Preparing to perform remedy
    • 9.5.2Remedial apportioning setting screen
    • 9.5.3Remedy when personal computer HDD fails (no backup)
    • 9.5.4 Remedy when personal computer HDD fails (backup)
    • 9.5.5 Apportioning method when computer crashes
    • 9.5.6 Remedy when watt hour meter fails (monitoring impossible)
    • 9.5.7 Remedy for system information setting error
• 10. Error Code List
• 11.Setting Check List
  • 11.1 Setting Check List
  • 11.2 Test Run Check
  • 11.3 Charging Test Run Check
    • 11.3.1 Charging (No WHM connection) Test Run Check
    • 11.3.2 Proportionally Divided Power Charge (RS-485 WHM connection) Test Run Check
• Appendix 1: Installing Windows XP Professional
• Appendix 2: Auto Log-in Confirmation Method
• Appendix 3: Correction to Charge Calculation in the Event of G-50A Replacement due to Fault