Mitsubishi LT 40164 User Manual LCD TELEVISION Manuals And Guides 1006335L

User Manual: Mitsubishi LT-40164 LT-40164 MITSUBISHI LCD TELEVISION - Manuals and Guides View the owners manual for your MITSUBISHI LCD TELEVISION #LT40164. Home:Electronics Parts:Mitsubishi Parts:Mitsubishi LCD TELEVISION Manual

Open the PDF directly: View PDF .
Page Count: 40

IMMERSIVE

with Mntegrated Sound

MODELS

ND LED

Projector

LCD HDTV

WE 'S GU!

This manuam provides basic connection, setup, and operating instructions. Pmeasevisit our website at

wwwo Mitsubishi-tvocom to view or downmoad a detaimed owner's guide that fully describes the features

of this TVo Follow the Support minkto the Product Documents page.

o For questions:

Visit our website at www.mitsubishFtv.com.

E-mail us at MDEAservice@mdea.com.

Call Consumer ReHations at 800-332-2119 for operationaH or connection assistance.

For information on System Reset, pHeasesee the back cover.

To order repHacement or additionaH remote controHs, visit our website at www.mitsuparts.com or call

800-553-7278.

265 Series, IR emitter cabHes for NetCommand home=theater controH are avaiHabHefor purchase from

Mitsubishi. Call 800-553-7278 and request either part number 242D483020 (two=ended cable) or part

number 299P254020 (four=ended cable).

HmGH-DEFmNmTmON MULTHMEDHA mNTERFACE

PROCESSOR

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

/_ The lightning flash with arrowhead symbol

within an equilateral triangle is intended to

alert the user of the presence of uninsulated

"dangerous voltage" within the product's

enclosure that may be of sufficient magnitude to consti-

tute a risk of electric shock to persons.

The exclamation point within an equilat-

eral triangle is intended to alert the user to

the presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the product.

WARNING: This product shall be connected to a MAINS

socket outlet with a protective earthing connection.

MAINS DISCONNECTION: The mains plug is used

as the disconnect device. The mains plug shall remain

readily operable.

WARNING: To reduce the risk of fire or electric shock,

do not expose this apparatus to rain or moisture.

This apparatus shall not be exposed to dripping or

splashing and no objects filled with liquids, such as

vases, shall be placed on the apparatus.

WARNING: This product contains chemicals known

to the State of California to cause cancer and/or birth

defects or other reproductive harm.

TV WEIGHT: This TV is heavy. Exercise extreme care

when lifting or moving it. Lift or move the TV with a

minimum of two adults. To prevent damage to the TV,

avoid jarring or moving it while it is turned on. Always

power off your TV, unplug the power cord, and discon-

nect all cables before moving it.

Note: Features and specifications described in this

owner's guide are subject to change without notice.

Custom cabinet installation must allow for proper

air circulation around the television.

NOTE TO CATV SYSTEM INSTALLER: THiS REMINDERiS

PROVIDEDTO CALLTHE CATVSYSTEMiNSTALLER'SATTEN-

TIONTO ARTICLE820-40 OFTHE NECTHATPROVIDES

GUIDELINESFORTHEPROPERGROUNDINGAND, IN PARTIC-

ULAR, SPECIFIESTHATTHECABLEGROUNDSHALL BE CON-

NECTEDTOTHE GROUNDINGSYSTEMOF THEBUILDING,AS

CLOSETO THEPOINTOF CABLEENTRYAS PRACTICAL.

Children and TV Viewing

The American Academy of Pediatrics discourages televi-

sion viewing for children younger than two years of age.

For assistance call 1(800} 332-2119

FCC Declaration of Conformity

Product:

Models:

Responsible

Party:

LCD Flat Panel HDTV

Telephone:

LT-55154

LT-40164, LT-46164, LT-55164

LT-46265, LT-55265

Mitsubishi Digital Electronics

America, Inc.

9351 Jeronimo Road

Irvine, CA 92618-1904

(800) 332-2119

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and

(2) This device must accept any interference

received, including interference that may cause

undesired operation.

Note: This equipment has been tested and found

to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential instal-

lation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may

cause harmful interference to radio communica-

tions. However, there is no guarantee that interfer-

ence will not occur in a particular installation. If this

equipment does cause harmful interference to radio

or television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by one

or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment

and the receiver.

Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

Consult the dealer or an experienced radio/TV

technician for help.

Changes or modifications not expressly

approved by Mitsubishi could cause harmful

interference and would void the user's authority

to operate this equipment.

TV Software

Do not attempt to update the software of this TV with

software or USB drives not provided by or authorized

by Mitsubishi Digital Electronics America, Inc. Non-

authorized software may damage the TV and will not be

covered by the warranty.

Contents

Important Safety Instructions ................ 4

Stand Installation ......................... 5

Waft-Mounting ........................... 6

Basic Setup and Operation

Before You Begin ........................ 7

Remote Control ......................... 8

Setting Up and Using TV Inputs .............. 9

Basic TV Operation ...................... 11

2 TV Connections

Input and Output Jacks ................... 13

Cable Routing ......................... 13

Connection Diagrams .................... 14

Connection Types and Audio/Video Quality .... 16

3 TVFeatures

FAV (Favorites) ......................... 17

ChannelView Channel Listings .............. 17

VUDU Internet Services .................. 18

Wireless Audio Playback .................. 19

Camera Images and Music Files ............ 20

Sleep Timer ........................... 21

Sound Projector ........................ 22

4 TV Menus

Picture ............................... 24

Sound ............................... 25

Captions ............................. 26

Setup ............................... 27

Inputs ............................... 28

Lock ................................ 29

Appendices

Appendix A: Programming the Remote Control .30

Appendix B: Troubleshooting .............. 31

Trademark and License Information .......... 33

Mitsubishi TV Software .................... 34

Warranty .............................. 38

Network Service Disclaimer ................ 39

Cleaning Recommendations

Normally, light dusting with a dry, non-scratching duster

wH[ keep your TV clean. If cleaning beyond this is

needed, please use the following guidelines:

First, turn off the TV and unplug the power cord from

the power outlet.

Occasionally clean dust build-up from the air-intake

gdl[es on the back and sides of the TV. Clean using a

vacuum cleaner with abrush attachment.

Top and Sides of the TV

• Gently wipe down your TV with a soft, non-abrasive

cloth such as cotton flannel, microfiber, or a clean

cloth diaper, lightly moistened with water. Dry with

a second dry, soft, non-abrasive cloth.

For oily dirt, add a few drops of mild liquid deter-

gent, such as dishwashing detergent, to the water

used to moisten the cloth. Rinse with a second

cloth moistened only with water. Dry with a third

dry, soft, non-abrasive cloth.

Screen

• Use only a soft, dry cloth to dean the LCD

screen. Do not use any liquids.

= Wipe the screen gently with an up and down motion.

Clean the entire screen evenly, not just sections of

the screen.

General Cleaning Precautions

• DO NOT allow liquid to enter the TV through the

ventilation slots or any crevice.

DO NOT use any strong or abrasive cleaners, as

these can scratch the surfaces.

DO NOT use any cleaners containing ammonia,

bleach, alcohol, benzene, or thinners, as these can

dull the surfaces.

DO NOT spray liquids or cleaners directly on the

TV's surfaces.

DO NOT scrub or rub the TV harshly. Wipe it gently.

For assistance call 1(800) 332-2119

important Safety instructions

Please read the following safeguards for your TV and

retain for future reference. Always follow all warnings

and instructions marked on the television.

EXAMPLE OF ANTENNA GROUNDING

10)

11)

12)

13)

14)

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in

accordance with the manufacturer's instructions.

Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

0ncluding amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

Only use attachments/accessories specified by the

manufacturer.

Use only with the cart,

stand, tripod, bracket,

or table specified

by the manufacturer,

or sold with the

apparatus. When

a cart is used, use

caution when moving

the cart!apparatus

combination to avoid

injury from tip-over.

Unplug this apparatus

during lightning storms or when unused for long

periods of time.

Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way', such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

LEADIN WIRE

ELECTRIC

SERVICE

DISCHARGE UNIT

(NEC ARTICLE 810-20)

GROUNDING

CONDUCTORS

(NEC ARTICLE 810-21)

ELECTRODE SYSTEM

NEC NATIONAL ELECTRICAL CODE (NEC ART 250, PARTH)

Outdoor Antenna Grounding

If an outside antenna or cable system is connected

to the TV, be sure the antenna or cable system is

grounded so as to provide some protection against

voltage surges and built-up static charges.

Replacement Parts

When replacement parts are required, be sure the

service technician has used replacement parts speci-

fied by the manufacturer or have the same character-

istics as the original part. Unauthorized substitutions

may result in fire, electric shock or other hazards.

If Your TV Gets Damaged

Crystalline liquid may leak from the LCD panel and

broken glass may be scattered.

OAUTmON: The crystaJJine Jiquid is toxic. Avoid

contact with your skin, eyes, or mouth. DO NOT

touch the broken glass or crystalline liquid. DO NOT

get glass fragments or crystalline liquid into eyes or

mouth. Shoumd either contact your eyes or mouth,

rinse the contacted area thoroughmy with water and

consuJt your doctor.

Disposal of Your TV

The LCD panel contains a small amount of crystalline

liquid which is toxic and should not be touched.

DO NOT dispose of the TV with general household

waste. For disposal or recycling information, contact

your local authorities or the Electronic Industries Alli-

ance at www.eiae.org.

For assistance caJJ 1(800) 332-2119

Stand installation

Note

• 40= or 46=inch TV: If planning to wall-mount the TV, there is no need to install the stand.

55=inch TV: The TV comes from the factory with the stand pre-installed.

Required: Phillips Screwdriver ('--_---']

Extension pieces

on back of stand

[]

BACK

DO support the TV

under the corners. DON'T place your hand where it can

get caught under the TV.

Two adults are required to lift the TV.

TV in protective

wrapping

Repacking the Stand

CAUTION. Place the

stand in the foam insert

with the extension pieces

facing away from the TV.

Otherwise, the TV will be

damaged in transit.

Protect the TV and

stand with the original

packing material.

Extension pieces on stand

must face out, away from TV.

For assistance call 1(800} 332-2119

Wall=iVlounting

To order a wall-mount kit, please contact Peer-

less Industries, Inc. at (800) 473-3753 or visit

www.peerlessmounts.com. Order wall-mount kit model

ST650.

Stand Remova_ Prior to WaHoMounting

To order a wall-mount kit from Mitsubishi Digital Elec-

tronics America, Inc., please visit www.mitsuparts.com

or call (800) 553-7278.

Complete installation instructions are included with the kit.

Note

• 55=inch TV: Remove the factory-installed stand prior to wall-mounting.

40= or 46=inch TV: If you installed the stand for table-top use, follow these instructions to remove it prior

to wall-mounting the TV.

1, Disconnect the TV's AC power cord from the AC

power outlet.

Spread the protective sheet that was wrapped

around the TV on a flat, even surface, such as a

sturdy table. The protective sheet will help prevent

damage to the display.

iMPORTANT: To avoid damaging the screen,

make sure there are no foreign objects under or

on top of the protective sheet.

3, Position one person on each side of the TV (left and

right sides). Have each person firmly grasp their side

of the TV and gently place it face down on the pro-

tective sheet with the display stand hanging over the

edge of the table. See the illustration to the right.

4, Use a magnetic philips screwdriver to remove the

stand screws from the recessed holes (see illustra-

tion to right). Note: A regular screwdriver can be

used with a separate magnetic pick-up tool.

While one person holds the TV with both hands,

have the other person grasp the stand (see illustra-

tion to the right) and remove the stand by pulling it

away from the TV inthe direction of the large arrow

shown in both illustrations.

Protective

sheet

TV\

Stand __

Table

f55-inch TVs

(6screws)

Protective

Sheet

40- and 46-inch TVs_

(4screws)

Pull stand

to remove.

For assistance call 1(800) 332-2119

PBeasetake a moment to review the foUowing Ust of

items to ensure that you have received everything.

Remote Controm

Two AA Batteries

Basic Owner's Guide

Quick Setup Guide

Product Registration

Card

Power Cord

CabmeTies

Stand Screws (40- and

46-inch TVs onmy}

265 Series. Calibration

Microphone

Review the important safety, instaUation, and oper-

ating information at the beginning of this book.

Choose a )ocation for your TV.

o See the stand-installation or wall-mounting

requirements starting on page 5,

AUow at Beastfour inches of space on aUsides

of the TV to heBpprevent overheating. Over-

heating may' cause premature faUure of the TV.

Avoid locations where light may reflect off the

screen.

3, Install the batteries in the remote control.

4, Plug the TV into an AC power outlet.

TV power connection

For assistance ca(( 1(800} 332-2119

81. Basic Setup and Operation

Remote Control ....

Sleep Timer, page 21

Number/letter keys

Channel tuning, page 10

Pass-code entry, page

r- Emitter-Bulb End

TV CAB/SATOrB AUDIOVCR

Press the keyfor the device type to

control. Leave in TV mode for normal

TV viewing.

(_ Powers TV on or off.

Adds a separator in digital channel

numbers. Clears some menu entries. Returns to the previous channel.

VOL

PAGE

Mutes the TV speakers.

Displays shortcuts for the number keys.

Press to check if shortcuts are available

for the current device.

Controls volume of TV speakers.

__ Changes channels; moves to another

page in a menu or list.

O Selects a or menu

channel number item.

A V 4 I1_ Navigation and adjustment

controls

ChannelView listings, page 17.

TV status or TV help.

1_ (PAUSE)Freezes a broadcast TV picture.

Record/Playback controls for external

devices. Additional setup is required.

Displays up to nine favorite

sources, page 17.

Changes picture shape,

page 12

Connects to internet content

provided by VUDUTM,page 18.

Press to select a TV input,

page 10.

Audio settings, page 25

Video settings, page 24

Displays or clears the TV main

menu (page 24). Also steps

back one menu.

Clears all menus.

Series. Special keysfor use

with NetCommand IR control.

See the detailed owner's guide at

www.mitsubishi-tv.com.

For assistance call 1(800) 332-2119

1. Basic Setup and Operation 9

Press the _ key to

ensure that the remote

control is in TV mode.

Aim the emitter (bulb)

end of the remote control

at the TV and press the

POWERkey (_, Wait for the

Welcome screen.

If you wish to change the

menu language to Espa_oL

press V.

i i C]]]]] i]]]]I]Q

Cil )

i ?

(

Eng(ish

Welcome Screen Energy Optons

o Mitsubishi recommends the Home setti%,

which uses power within ENERGY STAR_

guidelnes.

The Retal setting looks best under bNght

lghting. In this mode, the TV uses power in

excess of ENERGY STAR guidelnes.

This table compares energy choices offered in the

Welcome screen,

Picture Mode Bright Brllant

Backlght Level Reduced Full Brightness

Brightness

4, Press _ to move to the

energy-mode seleclons.

Select Home.

Press _ to highlght EXIT.

Press ENTERto clear the

menu.

Using the ANT (Antenna} Input

If using an antenna or direct cable service (no cable

box), connect the incoming coaxial cable to the TV's

ANT input. Refer to page 16.

You must perform a channel scan to enable recep-

tion of digital channels, If you skip this step, the TV

will receive only analog channels. The channel scan

wi/search for high-definition and standard-definition

channels avalable in the local area.

Memorizing Channels with Channe/ Sca n

For the ANT input

To start channel memorization

3, Power on the TV.

Press MENUand open the Setup >Channel menu.

First press V to navigate to the Setup icon, then

use _ to highlight the Channel icon.

Start channel memorization from the Setup >Channel

menu.

Press V to enter the menu.

Highlght Ant Air if connected to an

over-the-air antenna. Highlght Ant

Cable for service over direct cable

(no cable box). Press ENTERto add a

check.

For first-time setup, highlght All

channels. To scan for channels not

already in memory, highlight New

only. Press ENTERto add a check.

Highlight Scan and press ENTER.

Channel memorization may take up

to 15 minutes to complete.

To stop channel memorization before completion,

press CANCEL.

For assistance ca((1(800} 332-2119

10 1. Basic Setup and Operation

Setting Up Other inputs

1, Power on the TV.

Power on the devices to ensure detection.

3, Connect one device to the TV, making note of the

TV input jack.

The TV will display the New Device Found screen if

the connection type is detectable.

4, Highlight the device type in the omscreen list and

press ENTER.The name you select here will appear

in the Input Selection menu.

Selecting an input to Watch

3o Press INPUT,

Rfyou have only two connected

devices, the INPUTkey switches

between them without displaying

the Input Selection menu.

Sample New Device

Found screen.

Press EXITto close the New Device Found screen.

Repeat steps 3 through 5 for each additoinal device

you want to add.

About Auto Input Sensing

This TV's Easy Connect TM Auto Input Sensing

feature detects most input connections automati-

cally. Some exceptions are:

o A connection on the ANT input

*TV audio outputs (analog and digital)

An HDMI-equipped device that is powered off.

Power on the device first to ensure detection.

Ethernet

Auto Input Sensing for Most Devices

When you first connect a device, the TV will:

a. Detect the connected device and auto-

matically switch to it.

b. Prompt you to identify the device type.

c. Repeat these steps for other newly

detected devices.

Sample Input Selection menu, antenna input selected

Press 4 _ to highlight an input icon.

3, Press ENTERto switch to the input.

Tuning to ChanneJs on the Antenna Input

*Enter the channel number using the number keys

on the remote control and press ENTER.

For a two-part digital channel, such as 3-1, press 3

*Press OHA/V to change channels one channel at

a time.

Press and hold OHA/V to speed through chan-

nels.

*Press _ to return to the previous channel.

Use the Fav (Favorites) feature to tune to up to nine

favorite channels. See page 17,

Press GUIDE to display ChannelView channel listings,

highlight a channel number, and press ENTER to tune.

For assistance caJJ 1(800} 332-2119

1. Basic Setup and Operation 11

Picture Settings

1, To get the best picture under different viewing con-

ditions, set the Picture Mode first before changing

other video settings. See page 24 for a description

of the options.

a. Press VIDEO.

b. Press Y until the Picture Mode

option displays.

Audio Controls

Changing the Audio Outpu t

To switch from the internal TV speakers to an external

sound system:

1, Press AUDIO.

Press Y to display the Sound

option.

3, Press _ to change.

c. Press I_ to make one of these selections:

Brilliant Under bright light

Game With gaming consoles (inputs

named Game or PC only)

Bright For most daytime viewing

Natural For most nighttime viewing

Press Y to display the name of another adjustment.

3, Press _ to make the adjustment.

4, Wait a few seconds and the display will clear.

Additional picture options are available through the fol-

lowing menus:

Changing Audio Settings (TV Speakers Only)

1, Press AUDIO.

Press V to display the name of the adjustment you

want. See page 25 for options.

3, Press _ to change.

Controlling Sound Volume

Press V0L A/V to adjust the

sound level of the TV speakers.

See the full owner's guide at

www.mitsubishi-tv.com for

methods of controlling A/V receiver

volume.

Picture >Picture Plus 24

265 Series. Picture >Perfect 25

POWER indicator

Key O Off

O Steady On

Q Slow Blinking

None O TVis powered off. Normal operation.

Green O TVis powered on. Normal operation.

Green

Red/

Yellow

TV powered off, auto-on TV Timer is set.

Normal operation. TV can be turned on at any time.

TV may require service.

• Hold power button on front panel for 10 seconds to

reset TV.

• If LED continues to flash red and yellow after reset, turn

off the TV and unplug it from the AC power source. Wait

one minute and then plug the set back in.

If LED continues to flash red and yellow, go to

www.mitsubishi-tv.com or call 1-800-332-2119 to receive

Authorized Service Center information.

You may be asked to count how many times the LED

flashes each color to assist in troubleshooting.

For assistance call 1(800) 332-2119

12 1. Basic Setup and Operation

The FORMAT Key and Picture Shape

RepeatedBy press the

FORMATkey to cycBe

through displays avail=

abBefor the current

program. The TV wifl

remember the format

you Bastused on each

input.

Sampme Uses of the FORMATKey

You can use the FORMATkey to reduce or efiminate bBack areas at the

edges of the 9icture.

Squarish 4:3 image is

narrower than the 16:9

screen; unused areas at the

sides are tiffed with black.

Wide Expand mode stretches

the picture sideways to fifl the

screen.

Wide 2.35:1 anamorphic DVD

image; unused areas at the

top and bottom are fifled with

black (letterbox effect).

Zoom mode. The picture tiffs

the screen. All four edges are

cropped in this mode.

More TV Features

Features covered in this Basic Owner's Guide incBude:

ParentaB controBs (Lock menu) 29

TV CBock. Set the TV CBock if you pBanto use the 27

TV Timer (page 27) or ChanneBView (page 17).

Favorite sources 17

ChanneBView channeB fistings 17

Changing input names in the Input Selection 28

menu (Inputs > Name menu)

Digital camera images and music files 20

Programming the Remote Control 30

See the detailed owner's guide at

www.mitsubishi-tv.com for a complete code list.

Internet video streaming with VUDU 18

265 Series. Listening to a wireless audio 19

device with the TV speakers

See the detailed Owner's Guide at

www.mitsubishi-tv.com for more on the features

described here and to learn about other features,

including:

o HDMI control (CEC) of other A/V devices

Center and rear channel audio output

Using an external subwoofer

Using the TV with a computer

265 Series. NetCommand IR control of other A/V

devices. Use of NetCommand requires purchase of

IR emitter cables from Mitsubishi.

For assistance ca(( 1(800} 332-2119

TVConnections

DiGiTAL

AUDIO

OUTPUT

(page 15)

CENTER=CH INPUT_

NetC OUT/IR iN

(265 Series.

NetCommand/IR external

controller jack. See the

detailed owner's guide at

www. m itsu bishi-tv.com.)

:®®

NetCOUT /IRIN

LAN

(Ethernet, port

page 18)

_] IGITAL

AUDIO

OUTPUT

®®

CENTER-CH SUBWOOFER

INPUT OUTPUT

1,w ,&

A & ,ik A ii

R-AUDIO-L Pr Pb = Y/VIDEO

(analogstereo (component /

audio)input video input) Y/VIDEO

(composite video)

AVR/SURROUND

OUTPUT

(page 26)

SUBWOOFER

OUTPUT$

See the detailed

owner's guide at

www.mitsubishi-tv.com.

ANT

(coaxial

antenna input) HDMI

_(265 secalibrati°n

__des

I!_ I _,_o,o

_===ml = ==mama=_,

_<Pr

<USB

USB

<(PowerOnly)

DVl/PC

( ( 0 )) 41AUDIO

INPUT

HDMI4

<HDMI3

<HDMI2

Microphone Input

page 23)

- AUDIO

(analogstereoaudioinput)

-Y/VIDEO

(composite video input)

- Y/VIDEO Pb Pr

(component video

input)

- USB (page 20)

USB (Power Only)

- Provides power to TV

accessories.

-DVI/PC AUDIO INPUT

(page 14)

-HDMI

Cable --'_n-T,nn

Install the supplied

cable ties in any of four

mounting holes.

Removing the

cable tie

Press the release tab to

loosen the cable bundle.

Sample cable muting. Secure the cable

bundle with the release tab facing out.

For assistance call 1(800) 332-2119

14 2. TV Connections

Mitsubishi recommends using high-speed HDMI

cables to connect newer devices incorporating HDMI

technology.

Required:

• RCA-type component video cables

Left/right analog stereo audio cables

Component

video device

Any HDMI device TV

incoming from

= cable service or

.... .satellite dish

Required:

Composite video cable (usually yellow)

Left/right analog stereo audio cables

L® •,L

AUDIO

R(_) Audio • R

AUDIOOUT cables

COMPOSITE Composite

VIDEOOUT video cable

VCR or other device with

composite video output

Required:

DVl-to-HDMI cable or DVl/HDMI adapter and

HDMI cable

Analog stereo cable with mini plugs

Digital DVl

device

DVl=to=HDIVll

cable

For assistance call 1(800) 332-2119

2. TV Connections 15

Most setups require either an optical audio cable or

analog stereo audio cables. To send audio from TV

channels received on the ANT input or devices con-

nected directly to the TV, you must use one of the con-

nections shown below.

The TV makes all audio available in digital and analog

formats:

• Analog audio coming into the TV is available as

output in digital stereo format on the DIGITAL

AUDIO OUTPUT jack.

Digital incoming audio is available as analog output

on the AVR/SURROUND L and R jacks.

0pticamcable

(digitalAN

receiver)

DIGITAL

I_1 AUDIO

I _ OUTPUT

f:2:

Stereoanalog cables

{analogAN receiver)

Required: One HDMI-to-HDMI cable

This option allows you to view content from devices

connected to an A/V receiver. The A/V receiver can

send audio and video to the TV over a single HDMI

cable. You can use an HDMI connection as described

here in addition to an audio connection from the TV's

audio output. The optional audio connection allows you

to hear, through the A/V receiver, devices connected to

the TV only, e.g., an antenna on the ANT input.

HDMIcable t

DIGITAL

AUDIO

OUTPUT

AN receiverwith

HDiVlloutput

Any connection

types

HDMIOUT OPTICAL

AUDIO IN

R L

ANALOGAUDIOIN

A/V receiver back panel

For assistance call 1(800) 332-2119

16 2. TV Connections

AntennaorCableTV S

Connect the incoming cable to the TV's ANT input.

Older cable

box

Not recommeded. Other connection types

provide better quality audio and video.

Required:

1. Video cables

la. Component video cables (red/blue/green)

lb. Composite video cable (usually yellow)

2. Left/right analog audio cables.

3. Two-way RF splitter

4. Two coaxial cables

Note: If your recording device has an analog-only

tuner, you must use a digital converter box to

enable recording of digital broadcasts.

la.

Component

video cables

AUDIOOUT

COMPOSITE

VIDEOOUT _ _ _ I ANTENNAIN

COMPONENT

VIDEOOUT @

DVD Recorder or VCR 3.

RF Splitter

Incoming cable

Connection Types and Audio/Video Quality

VIDEO QUALITY

Component

HDMI HDMi-to-DVI Video

®@@

Composite

Video

HDMi Digital L/R Analog

Audio Audio

For assistance call 1(800) 332-2119

TVFeatures

The FAVkey gives you quick access to favorite program

sources. Sources can be channels from the ANT input

or devices connected to the TV. You can store up to

nine favorites.

1. Press iNPUTand switch the TV to the input

you want to add. If adding a channel, switch

o to the ANT input and tune to the channel.

_, 2. Press theFAV key.

._ 3. Movethe highlight tothe number position

you want to assign to the channel or input.

_: 4. Press ENTER.

1. While watching TV, press the FAVkey.

'_ 2. In the Favorites menu, highlight the channel

E or input you want to remove.

Q: 3. Press CANCEL.

Sample Favorites menu. Switch to favorite channels or

inputs using number keys. =: 2.

While watching TV, press the FAVkey.

Press the number key for the channel or

_nput you want.

About Channe_View

ChanneIView displays program descriptions sent by broad-

casters. This information may be unavailable in some areas.

ChanneIView TM shows memorized channels on the ANT

input. It displays channel names and program information

for digital channels. No program information is displayed for

analog channels.

ChannelView allows you to set up three banks of custom chan-

nels for convenient access. You can save groups of channels

by content (e.g., news, sports, children's programming) or by

TV user.

Note: You must first set the TV Clock (page 27) to receive

ChannelView listings.

ChannelView ",All" channels tab. Programs for the tuned

channel are listed on right side of screen.

ChanneIView Custom ChanneJ Banks

Select a channel bank to customize.

f, Press GUIDEto display ChannelView.

Press MENUto move the highlight to the bank

header.

3o Press 4 _ to select Bank 1, 2, or 3.

4, With the bank name highlighted, press ENTERto

enter setup mode where you can select channels to

include in the bank.

Using Custom Channel Banks

o While watching TV, press ONA/V. The TV will

tune only to channels stored in the current bank.

To change to a different channel bank:

1. Press GUIDE.

2. Press MENU.

3. Press 4 b to highlight a bank.

4. Press MENUto see channels in the bank.

To allow tuning to any channel in memory, select

the All bank.

For assistance call 1(800} 332-2119

18 3. TV Features

hternet services provided by VUDUTM let you access

many popular on-line applications. Rnaddition to free

content, VUDU's movie service lets you buy and rent

movies through the TV. Visit www.VUDU.com to learn

more about available movie titles, prices, recommended

bandwidth, and services offered. For a list of recom-

mended touters and switches, see the Support > FAQ

section at VUDU.com.

Required for VUDU mnternet Services:

o Broadband internet service

Ethemet cable or a compatible wireless adapter.

Computer access to the VUDU.com website

(required for initial account activation).

A credit card for rental and purchase transactions

from VUDU's movie service.

Home Network Setup

Before using VUDU internet services, you must connect

the TV to the internet using one of these methods.

Ethemet Connection

DHCP (automatic}

1, Connect the TV to your network router with a Cat-

egory-5 Ethemet cable (not supplied).

Wireless Connection

164 and 265 series models have built-in wire-

less capabilities and can communicate directly

with your wireless router.

154 Series TVs require a compatible USB wire-

less adapter. See the detailed owner's guide at

www.mitsubishi-tv.com.

3o Disconnect the Ethernet cable if present.

Open the Setup >Network menu. Detected net-

works will appear listed on the screen in order of

signal strength.

cable

Open the Setup >Network menu to review set-

tings.

3, Press EXITto clear the menu.

Manuam

3, Connect the TV to your network router with an

Ethernet cable.

In the Setup >Network menu, highlight Manuam

and press ENTER.

Press _ to move to the Connection Data area.

4, Input the connection data.

5, After entering connection data, press ENTERto

connect.

Change any of the following if needed:

Default Gateway

o DNS

Subnet Mask

Setup >Network menu

3, Highlight the desired network and press ENTERto

connect. A check will appear next to the connected

network.

Setup >Network menu after connecting. The active

network is checked and connection data displays.

4, If connecting to a secure network, enter the

network key or password on the remote control

when prompted.

For assistance ca(( 1(800} 332-2119

3. TV Features 19

Using VUDU )ntemet Services

After estabUshing internet connectivity,

press the INTERNETkey to display offer-

ings from VUDU. Press ENTERto launch

the des)red appUcat)on.

Getting Started with VUDU

1, After estabUshing internet connect)v-

ity, press INTERNETto display services from VUDU.

Select the VUDU movie service.

3, Browse the VUDU movie catalog and offerings.

4, When you are ready to rent or buy a movie, you

will be prompted to act)vate your VUDU account.

FoUow the on-screen instructions and use a com-

puter to go to www,VUDUocom/activation, A

credit card iS required for activation.

Once your account is activated, you can rent and buy

movies using only the TV and the TV's remote control.

Remote Oontro( Keys for VUOU

INTERNET Displays/clears the VUDU internet menu.

GUIDE VUDU HOMEkey

INFO VUDU MOREkey

LAST VUDU BACKkey (goes to previous menu)

{STOP} Stops playback

if You Are Unable to Connect to VUDU

Check all power and data connections.

If you can reach the internet with a computer or

other device on the same internet service used by

the TV, consult the router or modem owner's guide

for reset instructions.

If you cannot reach the internet, contact your

service provider. You may be asked for network

information such as the TV's IP address. Go to the

Setup >Network menu to see connection data.

For Further Assistance

o If you are having trouble connecting your TV or

accessing internet applications, contact Mitsubishi

Customer Care at 1-800-332-2119.

If you are having difficulty with your VUDU

account, contact VUDU Customer Care at

www.VU DU.comisu pport.

See more troubleshooting tips on page 32 in

Appendix B.

164 and 265 Series. The TV's built-in speaker array

can play audio from a handhe)d device using Bluetooth®

A2DP (stereo audio) wireless technology.

Pairing the TV with an Audio Device

1, Turn on the wireless device you wish to use for play-

back. Turn off all other wireless devices in the area

as the TV can pair with only one device at a time.

Press INPUTto display the input Se/ection menu.

Bluetooth® icon in Input Selection Menu

4°

Highlight the B(uetooth icon and press ENTER.

Pair your device with the TV and then connect. Some

devices pair and connect automatically, while others

require you to enter the TV pass code displayed.

Use keys on the TV's remote control to control play-

back. Not all keys work for all devices.

Skip a track (PAUSE}

(STOP}

_'_ _ (REVERSE}

(PLAY}

(FORWARD}

Resetting B/ueteeth Pairing or Connection

Perform this reset if the audio device does not connect

properly to the TV.

1, If the audio device has been previously paired with

the TV, delete the TV from the device's paired list.

Go to the TV's inputs > Name menu and highlight

the Bluetooth icon. Press ENTERto select Off.

3, Press EXIT.

4, Go to the inputs > Name menu and highlight the

Bluetooth icon. Press ENTERto select On.

Press EXIT.

Tips for Wire(ess P(ayback

Selecting the Bluetooth icon at a later time will

reconnect the TV to the paired device.

If the paired device is not availab)e, the TV will

accept pairing from a different device.

Once connection is lost, the TV wiU power off after

five minutes without receiving a signal.

To clear a paired device, turn off the B(uetooth icon

(inputs > Name menu) or pair the TV with a different

device.

For assistance ca((1(800)332-2119

20 3. TV Features

USB Media P_ayer Menu

USB Media Setup Menu

Use the USB Media Setup menu to set up play of a

slide show or playlist.

USB Media menu, Photos option selected

Displaying the Menu

Note: Back up the data on your USB drive before con-

necting it to the -IV. Mitsubishi is not responsible

for any file damage or data loss.

Connect your USB drive to the TV's USB port.

The USB Media Player menu displays while files

are being read. Wait until icons appear in the menu

before continuing.

• USB

The TV can read photo and music files from the USB port.

Notes on Using the USB Port

• The TV ignores all commands while reading flies.

Large files or high-capacity storage devices may

take a long time to display.

Some manufacturers' devices may be incompat-

ible with the TV. If the TV is unable to display your

photos, you can:

Transfer files to a different USB device.

Use your digital camera's composite video

output.

Picture Files Compatible with the USB Port

• Still images recorded using the Exchangeable image

File Format, version 2.1 (EXIF2.1)standard for digital still

cameras and Design Rules for Camera File Systems version

1.0 (DCF 1.0)

• Some images opened and resaved on a computer may not

play back or may not display inthe thumbnail list.

• Fullfile path names can be no longer than 50 characters and

must end in a .jpg extension.

For assistance call 1(800) 332-2119

Using the Photos and Audio

Menus

Use these keys with your photo and audio files.

Key For Photo or Audio Tracks

(_or Plays the slide show or playlist starting

from the highlighted item.

ENTER

(_ Pauses a slide show or playlist.

(_ Stops a slide show or playlist.

• Highlights the first or last item on the

current page.

_ • Skips to the previous or next item

during play.

• Displays the previous or next page of

items.

• Skips immediately to the previous or

next item during play.

Rotates an image clockwise in 90° incre-

GUIDE ments.

INF0 Displays the item name during play. Press

EXITto clear.

EXIT Clears on-screen displays.

MENU Displays the main menu; stops play.

Displays the Input Selection menu; stops

INPUT play.

3. TV Features 21

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

Photos and Moving Video

as Composite Video

Connect the camera to the TV using a composite video

cable and control the slide show or movie through the

camera. The display resolution will be standard-defini-

tion (480i).

1, Refer to the owner's manual supplied with the

camera for instructions needed for this setup.

Set the camera's output signal type to NTSC and

put the camera into playback mode.

3, With the camera still turned on, connect your digital

camera's composite video cable (usually yellow) to

the TV's YiVmDEOjack. To hear audio, connect the

camera's audio output cable to the AUDmOL jack.

The Sleep Timer turns the TV off after the length of time

you set. To set the TV to turn on at a certain time of

day, see the Setup >Timer menu on page 27,

Setting the Smeep Timer

1, Press SLEER

Press SLEEPadditional times to increase the time in

30-minute increments up to the maximum of 120

minutes.

Press EXITor wait five seconds without pressing any

keys for the message to clear,

Viewing or Changing the Smeep Timer

1, Press SLEEPto display the on-screen message.

Press SLEEPadditional times to change the time

before the TV powers off. To cancel the Sleep

Timer, press SLEEPrepeatedly until OFF is dis-

played.

Camera connection using a composite video came

4, When the New Device Found screen displays,

assign the name Camcorder.

Press EXITto close the New Device Found screen.

Highlight the icon for the camera input and press

ENTER.

If viewing photos, advance through the images

manually or set the camera to advance automati-

cally.

If viewing photos, control the slideshow from the

camera. Advance through the images manually or

check if the camera can advance automatically.

For assistance ca((1(800) 332-2119

22 3. TV Features

Positioning the TV

The TV's built=in speaker array can be set up to reflect

sound off the room walls to create a surround sound effect.

Center the seating area in front of the TV and at

meast six feet away,

Arrangements that give good resumts:

Enter the room dimensions and layout information

requested in the screen. To change measurements,

press A Y or enter numbers using the remote con-

trol's keypad.

mfthe room is an odd shape, mocate the TV to

take best advantage of wall reflections°

Avoid mocations that may distort sound reflec-

tionso

3, Press EXiTto exit and save settings.

4, Play some sampBe audio to check sound quality.

Rffurther adjustment is needed, use the Custom

menu as described next.

Custom Menu

use the Custom menu after defining the room layout.

1, From the Sound >SoundPro menu go to the

CUSTOM menu.

Connecting the TV

To hear digital surround sound, the TV must be con-

nected to a digitaB surround sound source. The sur=

round sound source can be on an HDMRinput or the

ANT input (for some digitaB broadcasts). Other stereo

connections will provide DoBbyPro Logic surround

sound.

Position yourself in your usual viewing location.

Remain in this position, looking at the TV, while

making the following adjustments.

Manual Setup

Manual setup is available for aft models.

Note: If you have already performed Auto setup, any

manual adjustments will erase all settings cre=

ated during Auto setup.

1, Press MENUand go to Sound >SoundPro.

For assistance ca((1(800) 332-2119

Controls in the SoundPro >Custom menu adjust the

TV's sound output,

3. TVFeatures 23

So.ndProjector,contin.ea

Adjusting

Beam Angles

Adjust Center Beam Angle until sound is

about equal in both ears.

Adjust Left Beam Angme to maximize sound

heard from the front left side.

Adjust Right Beam Angme to maximize sound

heard from the front right side.

Adjust Left Surround Beam Angme to where

the sound seems to come from the left rear

side. Rfthis cannot be achieved, make the

setting the same as that for Left Beam Angle.

Adjust Right Surround Beam Angme to where

the sound seems to come from the right rear

side. Rfthis cannot be achieved, make the

setting the same as that for Right Beam Angle.

Adjusting Levels

a, Adjust Center Levemto the mid level.

b, Adjust the following levels one at a time so that

each one sounds about the same as the center

level:

Left Levem

Right Levem

Left Surround Levem

Right Surround Levem

c, Check all sound levels by quickly switching

between them using A V.

d, Readjust individual levels in smaU increments

and recheck as above until all sound levels

seem about the same.

3, Place the microphone as described in the guide-

lines.

4, Press MENUand go to Sound >AutoSP,

Highlight START and press ENTER.

6, Quietly exit the room right away. Wait for completion

of setup before returning to the room.

7, Play some sample audio material to check the

sound quality.

Note: Do not perform manual adjustments after run-

ning Auto setup.

8, Store the microphone out of direct sunlight and

away from heat.

Resetting AngJe and LeveJ Values in the

Custom Menu

1, Press EXITto clear all menus.

Press MENU. Go to the Sound > SoundPro menu

and press ENTER.

3, Change any setting (e.g., TV Location).

4, Press EXITto clear all menus.

Press MENU. Go to the Sound > SoundPro menu

and press ENTER.

6, Enter the correct values for the room layout.

7, Return to the CUSTOM menu to adjust angles and

levels.

Auto Setup

265 Series

This section describes auto-setup available with 265 series

TVs. Auto setup uses the included calibration micro-

phone.

1, Power on the TV and external subwoofer, if any.

Plug the microphone cable into the TV's mNPUT2

left audio jack.

For assistance ca((1(800} 332-2119

Press MENUon the remote control to open the main menu and access these settings.

Picture

Settings in this menu are saved for the current input only. To make picture adjustments:

From the Picture >Video menu

1. Press _ _ to highlight an option

2, Press 4 _ to adjust.

Brilliant

Game

Bright

Natural

Advanced Modes.

Whime watching TV

1. Press the VDE0key.

2, Press A _' to select a video option.

3o Press 4 _ to change the setting.

For use under bright light.

Optimizes picture and video processing for game consoles

For most daytime viewing

For most nighttime viewing

164 and 265 Series.

Use Picture Modes to get

the best image under dif-

ferent viewing conditions.

Set the Picture Mode first,

before changing other

video settings.

Contact your professional installer for setup.

Contrast In most home lighting situations, medium contrast looks best. Stored for each Picture Mode.

Brightness Adjusts overaU picture brightness. Settings are stored independently for each Picture Mode.

Comor Adjusts overall color intensity from monochromatic to fully saturated. Saved by input.

Tint Adjusts the red-to-green ratio. Saved by input.

Sharpness Adjusts picture detail and clarity. Saved by input.

Comor Temp High gives white a cool cast. Low gives white a warm cast. Stored for each Picture Mode.

Video Noise Reduces minor noise (graininess)in the picture. Saved by input.

164 and 265 Series TVso EdgeEnhance TM makes the image appear sharper. Saved by input.

164 and 265 Series TVs, Provides strong contrast with detail over mixed screen content. Demo

displays a split picture to show On (right side) and Off (left side). Saved by input.

Adjusts peak brightness of the backUght. Applies uniformly to all inputs. Press ENTERto turn the

backUght on or off.

(Picture Plus)

Video Mute Displays a solid background when there is no video signal from the current input.

Screensaver Displays a screensaver while playing an audio-only source.

FimmMode

Smooth 120 Film

Motion (154, 164

series)

Smooth 240 fimm

Motion (265 series)

Test Picture

480i and 1080i signals only, In Auto, the TV automatically detects and applies film-decoding

correction to movies filmed at 24 frames per second. Try the Off setting if images show many

jagged edges. Setting saved by input.

Reduces motion blur in action scenes. Works in conjunction with Film Mode. Press ENTERto see an

adjustment screen.

Displays a test picture.

For assistance ca((1(800} 332-2119

4. TV Menus 25

Pict.re,contin.ed

o Resets sound and picture adjustments for the current input. Highlight the Reset icon

and press ENTERtwice to perform reset,

Reset has no effect on universal settings (Balance, Listen To, Language) or on

Advanced picture settings.

(PerfectColorTM/PerfecTintTM) 265 Series. Sliders let you adjust the saturation (intensity)

and hues of six separate colors for the current image source.

Advanced Modes. Contact your professional installer for setup.

164 Series, Special/ADV,

265 Series. mSFDayiADVl, mSFNight/ADV2

Settings in this menu are saved for the current input only. To make audio adjustments:

From the Sound >Audio menu While watching TV

[_ 1o Press _, V to highlight an option 1o Press the AUDI0key.

2. Press _ _ to adjust. 2. Press A V to select an audio option.

3o Press _ _ to change the setting.

TV Speakers On Turns on the internal TV speakers.

Off Turns off the internal TV speakers so you hear sound only through a connected device

(A/V receiver or headphones).

Center Makes the TV's speaker array act as a center channel. Sound >G/oba/ > Center

Channel must be set to On to use this option. See the detailed owner's guide at

www.mitsubishi-tv.com for use of this feature.

Bass Controls bass sound from the TV speakers.

Trebme Controls high-pitched sound from the TV speakers.

Bamance Controls audio balance between the right and left TV speakers (Sound Mode Stereo only)

Subwoofer [Subwoofer level Adjusts the volume level of a connected subwoofer. Set Sound >Global >Sub-

adjustment] woofer to On to make this adjustment available.

Sound Mode Stereo No special audio effects from the TV speakers

Surround Modifies audio from the TV speakers.

For monaural (non-stereo) programs, creates a simulated stereo effect.

For stereo programs, creates a simulated surround sound effect.

The TV's speaker array play's surround sound if available.

Music Optimizes the TV's speaker array for music listening.

Night Focuses the TV's speaker array to a single point to limit sound heard by others

outside the room. Press ENTERto adjust the focal point (Night Angme).

LevemSound On, Off Reduces differences in sound volume between programming segments.

For assistance ca((1(800} 332-2119

26 4. TV Menus

So.rid,continued ....

Analog ListenTo Stereo The TV plays stereo broadcasts in stereo and mono broadcasts in mono.

(For ANT analog Mono Reduces background noise. Use when receiving a weak stereo audio signal.

channels) SAP Second Audio Program. Selects an additional monaural sound track.

Settings in this menu apply to all inputs.

Anamog Audio These settings affect audio from the AVR/SURROUND jacks.

Out Fixed Use with an analog A/V receiver.

Variabme Use with headphones; adjust headphone volume using the TV's remote control.

Rear Use when supplementing the TV's speaker array with external rear speakers.

Subwoofer Select On to turn on audio to a connected subwoofer. Set to Off if no subwoofer is connected.

Center Channem On allows the TV's speakers to complement your external sound system as a center channel. Set

to Off if not in use.

Auto SP 265 Series. See page 23 for setup instructions.

Lets you set up the Sound Projector speaker array manually. See page 22.

Service On if Mute: Displays digital closed-caption signal Caption 1 (digital) or CC1 (analog) when audio from the

TV speakers is muted. While watching TV, press MUTEto turn closed captions on!off.

Digitam Caption 1-Caption 6: Caption signals sent by the broadcaster.

Analog o CO 1-CO 4. Standard closed-caption signals

Text 1-Text 4o Text-service signals

As Broadcast changes settings to those selected by the captions provider, or, if none, to the

TV's own caption defaults.

A white font on a black translucent background makes an easy-to-read combination.

For assistance ca((1(800} 332-2119

4. TV Menus 27

Language * SeBect either EngUsh or Spanish for on-screen menus.

o SeBect the )anguage for a digita) program from the ANT input (if avaUabBe).

Note:

Set the TV c)ock to:

Use the TV Timer to power on the TV automaticaUy at a preset time

Receive correct updates to ChanneBView Ustings

When the Daylight Saving Time change occurs, you must open this menu and set the TV's clock ahead or back.

The Timer tells the TV to power on automatically at a time you set. Use this menu to set a day,

time, input, and channel for the Timer. If the TV is already on at the set time, the TV will auto-

maticaUy change to the designated channel or input.

The TV c)ock must be set before you can use the Timer feature.

As a reminder that the TV Timer is set, the TV POWERindicator flashes slowly while the TV is powered off.

When the Timer turns on the TV, press any key on the remote control to keep it from turning off after five minutes.

See "Memorizing Channels with Channel Scan" on page 9 to scan for all available channels

on the ANT input.

Edit

After channel scan, Edit lets you add and delete memorized channels.

Press PAGEDN/UPto jump to the next or previous page of channel numbers.

Press A V 4 _ to move through all channel numbers, one at a time.

Adding/Demeting Channems Using the Channem Edit Menu

*Channels marked with a check are in memory.

*To add or delete a channel from memory, highlight the channel number and press ENTER.

To add a single digital channel not in the list, see the full owner's guide at www.mitsubishi-tv.com.

BmueGmow

(265 series)

Power

On Via

Controm

Over IP

On, Off Select On to see blue accent lighting when the TV is powered on.

On, Off Select On to allow TV power control over an internet connection. When enabled, the

powered-off TV consumes power in excess of ENERGY STAR guidelines for a powered-off

device.

Ethernet Connection

Wiremess Connection See "Home Network Setup" on page 18.

For assistance ca((1(800} 332-2119

28 4. TV Menus

i.p.t .........................................................................................................

o Lets you assign or change names of inputs appearing in the Input Selection menu.

Lets you turn the Ant and Bluetooth inputs On/Off (to dispBay or hide them in the Input

Se/ecdon menu); a paired device is cBeared from memory when the Bluetooth icon is

turned off.

Lets you deBete unused HDMR inputs from the Input Selection menu.

HighUght the input and press ENTERto see the name choices.

265 Series. Sets up or changes NetCommand RRcontro) of the current device.

See the fuU owner's guide at www.mitsubishi-tv.com.

265 Series. Sets up or changes NetCommand RRcontro) of an A/V receiver.

See the fuU owner's guide at www.mitsubishi-tv.com.

} On, Off

SeBect On or Off to enabBe or disabBe the TV's contro) of a CEC-enabBed HDMR

device. See the fuU owner's guide at www.mitsubishi-tv.com for use of this

feature.

Lets you rearrange icons in the Input Selecdon menu.

See demonstrations showcasing selected TV features.

For assistance ca((1(800} 332-2119

4. TV Menus 29

Parenta_ Menu

The TV comes from the factory with the rating Bocks

turned off and with pre-set U.S. ratings TV-PG and

movie rating PG. You must turn on bBocking for U.S.

ratings to activate these rating restrictions. You will be

prompted to enter a pass code when you seBect Lock

on the main menu.

Lock

Rating

StartTime/

StopTime

DisabBes or enabBes bBocking based on V-Chip signaBsand the U.S. rating system.

HighBight the rating BeveByou wish to change

and press ENTERto bBock it (_) or allow

it (__).

You can appBy suppBementaB content bBock-

ing to the age-based ratings by using the TV

content categories. (FV, D, L, S, V)

HigHight the rating level you wish to change

and press ENTERto block it (_) or allow it

Sets the time of day for enforcement of rating restrictions set in the Parental menu.

Note: To make rating restrictions active 24 hours a day, make Start Time and Stop Time the same.

Blocks all use of the TV during the time period you specify. Once a lock time is set, it

goes into effect immediately and you must enter a pass code to use the TV during the lock

period. To reactivate the time lock, power the TV off and then back on. To make Lock by

Time active 24 hours a day, make Start Time and Stop Time the same.

cleared the next time you perform a channel scan.

Use this option if small children try to press TV buttons.

o To release the Panel Lock from the TV's control panel, press and hold the INPUTbutton for

ten seconds. If the TV is powered off, press POWERafter the lock releases to power on the

TV.

To reactivate the lock, return to this menu and change the setting to On.

Other Menu Options (alternate rating system}

This TV can recognize new rating systems that may come into effect in the future. The Other

option remains grayed out until the TV receives a signal using an alternate rating system.

Such alternate rating systems will apply only to digital programming received on the ANT

input.

For assistance ca(( 1(800} 332-2119

30 Appendices

AppendixA:ProgrammingtheRemotecontro

Programming the Remote Contro_

f° Change the control mode to match the device type.

CAB/SAT Cable Box, DTV Receiver, Satellite Receiver

VCR VCR, DVR, DVD Player/Recorder

DVD DVD Player/Recorder, DVR, VCR

AUDIO A/V Receiver, Audio Amplifier, CD Player

Press and hold POWERon the remote control for

several seconds until the key blinks twice and goes off.

Enter the first five-digit code listed for your equip-

ment.

Point the remote control at the equipment and press

POWER.If the product has no power on/off function,

press a different key, such as @ (PLAY),1_ (STOP),

VOLUMEUP,or MUTE.

If the equipment does not respond, repeat the

preceding two steps using the next five-digit code.

Once you have found the correct code, write it in the

space below for future reference.

CABLE/SAT

VCR

DVD

AUDIO

This is an abbreviated list showing

the most popular codes. For a full

list, see the detailed owner's guide at

www.mitsubishi-tv.com.

GeneralInstrument

Jerrold

Motorola

Pace

Pioneer

ScientificAtlanta

10476

11376,11187,10476

11982,1187_ 11376

1187_ 10877

Bose 41933,41841,41629,41253,

41229,40639

Denon 4285_ 42279

Harman/Kardon 42443,42241,41306,41304,

40891

Integra 41805,41320,41298

JVC 42331,42239,42040,

41495,41374

Kenwood 41570,41569,41313

Mitsubishi 41957,41922,41921,41920,

41393

Onkyo 41805,41531,41320,41298,

40842

Panasonic 41763,41633,41548,41518,

41316,41308,41288,41275,

41935,41384,41023,40630

41759,41758,41658,41622,

41558,41441,41258,41058,

42522,42216,42172,41858,

41822

41518,41308

41476,41376,41375,41331,

41276,41176,40376,40176

Pioneer

Sony

Technics

Yamaha

DirecTV 11749,1137_11142,10749,

10639,10566,10392,10247

11856,11609,11442,11414,

11109,11076

11775,1150,1077DishNetwork

Hughes Network 11749,11442,11142,10749

Mitsubishi 10749

RCA 10566, 10392,10143

Samsung 11609,11442,1137_ 11276,

11109

Hitachi 20042,20000

JVC 20067

Magnavox 21593,20593,20081,20039,

20035,20000

M_sushita 20162,20035

MGA 20043

Mitsubishi 20173,2006_ 20043

Panasonic 21062,20616,20614,20162,

20035

RCA 20880,20060,20042

Sony 21972,21032,20636,20035,

20033,20032,20000

Tivo 20739,20636,20618

Toshiba 21972,21008,20045, 20043

Zenith 21139,20039,2003_ 20033,

20000

Apex Digital 31061,31056,31020,31004,

3079_ 30796,30794,30755,

30672

Coby 31628,31351,3117_ 31165,

3110_31086,30852,30778

Denon 32258,30634,30490

Funai

Hitachi

Insignia

Integra

JVC

Magnavox

Mitsubishi

Onkyo

Panasonic

Philips

Pioneer

ROA

Samsung

Sharp

Sony

Sylvania

Tivo

Yamaha

Zenith

30675

30664,30573

32596,32428,32095,30675

3214_ 31769,3062_ 30571

32365,31602,31550,31275,

31602,30869,30741,30591

31506,31472,31354,3117_

30675,30646,30539,30503

31521,30521

3214_ 31769,3062_ 30503

31762,31641,31579,30703,

30632,30503,30490

32084,32056,31340,,

31267,30675,30646,30539,

30503,32434,31506,31354

31571,31512,31460,30632,

30631,30571,30525,30142

32442

32213,31769,30822,30790,

30571,30522

32069,31470,31075,31044,

30820,30573,30490,30199

32250,31256,30752,30675,

30630

31633,31536,31516,31431,

30675

31512,31503

32558,32298,30817,30646,

30545,30539,30490

30869,30741,30591,30503

For assistance call 1(800) 332-2119

Appendices 31

To contact Mitsubishi customer service, see page 6.

TV Reset Comparison Guide

You can resolve many common TV problems using the

reset functions described in the following table.

iMPORTANT

Before you change sound or picture settings: If

picture or sound settings seem wrong for abroadcast

channel (a channel from the ANT input, a cable box, or

satellite receiver), first check other channels from the

same input before changing settings. If most other

channels from the same input seem correct, there is

likely a problem with the broadcast rather than with the

TV. Use care in this case, as changes you make to fix

problems on individual channels also affect all other

channels on the same input.

Format

PerfectColorTM/

PerfecTint TM

Reset (265

Series)

(for the single

input currently

being watched)

A/V Memory

Reset

(for the single

current input)

A/V Reset

(for all inputs)

Channel

Memorization

If the picture shape

seems incorrect, use

the FORMATkey to

change the picture

shape.

When the color

intensities seem out

of balance, use the

PerfectColor/PerfecTint

reset to reset the color

balances to the original

factory settings.

Both PerfectColor and

PerfecTint are reset at

the same time.

When audio and/

or video settings for

a single input seem

incorrect, use A/V

Memory Reset to

return the input to

the original factory

settings.

To reset audio and

video adjustments for

all inputs to the original

factory settings.

To erase and

re-memorize channels

on the ANT input.

Press FORMATto cycle through the

picture shapes available for the

signal.

1. While viewing the input to reset,

press MENUand go to Picture >

Perfect.

2. Press ENTERto display the

PerfectColor adjustment screen.

3. Press CANCELto reset the colors.

While viewing the input to reset,

press MENUand go to Picture >

Reset.

2. Press _'to highlight Reset.

3. Press ENTERagain to reset.

The last-used format for the signal

type will be recalled on the input.

Note: Also check the aspect

ratio feature on your cable box or

satellite receiver as this may be

altering the picture.

All PerfectColor/PerfecTint

sliders are reset to the original

center position. The PefectColor/

PerfecTint settings for other

inputs remain unchanged.

All Audio and Video settings for

the individual input are reset

except for the global settings

for audio Balance, Listen To,

Language, Video Mute, Smooth

120.

All Audio and Video settings are

returned to the original factory

settings, including global settings

not affected by Picture >Reset.

While viewing the TV, press the

control-panel buttons INPUTand

VOLUMEDOWNat the same time for at

least two seconds.

1. Press MENUand go to Setup >

Channel.

2. Highlight the reception mode,

e.g. Ant Air, and press ENTER.

3. Highlight All Channels and

pressENTER.

4. Highlight Scan.

5. Press ENTERto start channel

memorization.

All previously memorized chan-

nels for the antenna input are

erased and a new set of memo-

rized channels is created. To

add or delete individual channels,

see the Setup >Channel >Edit

menu instructions on page 27.

Lock Menu To change your Lock See the detailed owner's guide at www.mitsubishi-tv.com for instructions.

Pass Code menu pass code

For assistance call 1(800) 332-2119

32 Appendices

Control-Panel

Lock Release

System Reset

TV Reset

IMPORTANT:

Use this reset

only if other

troubleshooting

has been unsuc-

cessful.

VUDU

Reset VUDU

Account Pass-

word

VUDU

Reset Parental

Controls Pass

code

To re-enable the

control-panel buttons

after activation of the

Control-Panel Lock

If the TV does not turn

on or off, does not

respond to the remote

control or control-

panel buttons, or has

audio but no video.

To reset all consumer-

accessible settings

and all memories to

the original factory

defaults.

Use TV Reset if the TV

can respond to con-

trols but TV behavior is

abnormal.

CAUTION: All owner-

performed setups and

adjustments will be

erased.

You have forgotten

your account pass-

word.

You have forgotten

your pass code.

Press and hold the INPUTbutton on

the control panel for ten seconds. If

the TV is powered off, you can now

press the POWERbutton to turn it on.

Press and hold the POWERbutton on

the control panel for ten seconds.

1. While viewing the TV, press

MENUto display the TV main

menu.

2. With the main menu displayed,

press number keys 1 2 3to

display the Reset menu.

3. READ THE ON-SCREEN

WARNING AND INSTRUC-

TIONS.

• If you do not wish to use this

reset, press EXITor MENUto

back out.

If you wish to continue,

press ENTERto erase all

memories and settings.

Using a computer, go to

www.VU DU.com.

Call VUDU Customer Care at

1-888-554-VUDU (8838).

Allows the control panel to be

unlocked if the remote control is

misplaced.

The TV will turn off. Power on the

TV and the green LED will flash

quickly for about one minute. The

changes you made most recently,

before using SYSTEMRESET,may

be lost.

The TV will start the initialization

process and then turn off.

Power on the TV and the front

green LED will start flashing. All

memory and settings outlined in

this Owner's Guide will need to

be set again.

Reset your account password

from the VUDU website (requires

access to e-mail).

VUDU Customer Care will reset

your pass code.

Common Picture Problems

Picture does not look like a high-defini-

tion picture.

TV has sound but no picture.

Compare the picture to the TV's test picture (Picture > Picture+ menu)

to check if the source signal is supplying a lesser-quality image.

Not all signals are high-definition signals. To receive high-definition

programming from your cable or satellite provider, you must sub-

scribe to the provider's high-definition service. Some over-the-air

broadcasts are in high-definition and can be received with a high-

quality antenna suited to your location.

Press MENU on the remote control. If the menu displays, then

there is a problem with the incoming signal.

Check that all video inputs are plugged in firmly to the correct

input jacks.

Press and hold the POWER button on the control panel for ten

seconds to perform System Reset.

For assistance call 1(800) 332-2119

Appendices 33

Common Picture Problems

A color program appears as a black

and white image, or the colors are dim,

or the screen is black.

Picture from an HDMI input is noisy

(poor quality).

• If using component video, check that the red, green, and blue

input cables are correctly connected to the red, green, and blue

component video jacks.

If using composite video, check that the incoming cable is con-

nected the TV's green Y/VIDEO jack.

The PerfectColor color balance has been incorrectly set. Reset

the PerfectColor balance.

Compare the picture to the TV's test picture (Picture > Picture+

menu) to check the source of the noise.

Upgrade a Category 1 (unmarked) HDMI cable to a Category 2

high-speed HDMI cable.

Home Network

I cannot connect the TV to the network.

I plugged in a wireless USB adapter,

but the wireless connection is not

working.

The INTERNET key only goes to VUDU.

Go the Setup > Network menu. Obtain the TV MAC address and

provide it to the router.

The network may be locked. Go to setup > Network. Highlight the

network name and supply the pass code.

Normal operation. The TV receives all internet services through

VUDU. The TV does not provide full internet access as does a web

browser on a computer.

Trademark and License Information

LICENSOR'S SUPPLIERS DO NOT MAKE OR PASS ON TO END USER OR ANY OTHER THIRD PARTY, ANY

EXPRESS, IMPLIED OR STATUTORY WARRANTY OR REPRESENTATION ON BEHALF OF SUCH SUPPLIERS,

INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, TITLE, MERCHANTABIL-

ITY OR FITNESS FOR A PARTICULAR PURPOSE.

Manufactured under license from Cambridge Mechatronics Ltd.

Rapidfire and the 1... logo are trademarks of Cambridge Mechatronics Ltd

The Bluetooth® word mark and Iogos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such

marks by Mitsubishi Electric is under license. Other trademarks and trade names are those of their respective owners.

Digital Light Processing® and DLP® are registered trademarks of Texas Instruments.

Manufactured under license from Dolby Laboratories. Dolby is a trademark of Dolby Laboratories.

ENERGY STAR® and the ENERGY STAR mark are registered U.S. marks. ENERGY STAR is a registered mark owned

by the U.S. government.

HDMI®, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI

Licensing LLC in the United States and other countries.

® Science Foundation Certified Calibration Controls

Imaging

VUDUTMis a trademark of VUDU, Inc.

"x.v.Color" and the "x.v.Color" logo are trademarks of Sony Corporation.

ChannelView TM, DeepField TM Imager, Easy Connect TM, EdgeEnhance TM, NetCommand®, PerfectColor TM, PerfecTint TM,

Plush 1080p® 5G, Smooth120 TM Film Motion, Unisen TM are trademarks of Mitsubishi Digital Electronics America, Inc.

For assistance call 1(800} 332-2119

34 Trademark and License information

Mitsubishi TV Software

END=USER LICENSE AGREEMENT FOR EMBEDDED SOFTWARE

IMPORTANT - READ CAREFULLY: This License Agreement is alegal agreement between you (either an individual or an entity) and

Mitsubishi Digital Electronics America, Inc. (MDEA) for all software pre installed and/or provided along with this television ("Software"). By

utilizing this television and Software, you agree to be bound by the terms of this License Agreement.

The Software is protected by United States copyright laws and international treaty provisions, as well as other intellectual property laws

and treaties. The Software is licensed, not sold.

1. LICENSE GRANT. MDEA grants you a non-exclusive, non-transferable, limited right and license to use one copy of the Software

only with the Mitsubishi television model that included this owner's guide and owned by you.

2. RIGHTS AND LIMITATIONS.

Software Not for Resale. You may not resell or otherwise transfer for value the Software, except in conjunction with a sale of the TV that

Software has been pre installed.

Prohibition on Reverse Engineering, Decompilation and Disassembly. The Software contains trade secrets or other proprietary material

in its human perceivable form and to protect them, you may not reverse engineer, decompile, or disassemble, or otherwise reduce the

Software to any human perceivable form, except to the extent that the foregoing restriction is expressly prohibited by applicable law.

Separation of Components. The Software is licensed as a single product. Its component parts may not be separated for use on more

than one TV.

No Rental. You may not rent, lease, lend, or sublicense the Software.

Trademarks. This License Agreement does not grant you any rights to any trademarks of MDEA.

3. VIOLATIONS. You understand that any use, copying or transfer of the Software, except as permitted pursuant to this License,

may subject you to serious criminal and civil penalties including damages and an award to MDEA of attorneys' fees in connection with any

violation of this License. You further understand that you may be held legally responsible for any copyright infringement or other violation

of intellectual property rights that is caused, encouraged, or induced by your failure to abide by the terms of the License. This license

is effective until terminated, and will terminate immediately without notice from MDEA or judicial resolution if you fail to comply with any

provision of this License.

4. COPYRIGHT. All title and intellectual property rights in and to the Software (including but not limited to any images, photographs,

animations, video, audio, music, text, and "applets" incorporated into the Software), and any accompanying printed materials are owned

by or licensed to MDEA. All title and intellectual property rights in and to the content which may be accessed through use of the Software

is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and

treaties. This License Agreement grants you no rights to use such content, except that you own the media on which the Software is

recorded, but MDEA and its licensors retain ownership of the Software itself. All rights not expressly granted are reserved by MDEA.

5. EXPORT RESTRICTIONS, MDEA is licensing the Software for use within the United States. You agree that you will not

export or re-export the Software. You specifically agree not to export or re-export the Software: (i) to any country to which the U.S. has

embargoed or restricted the export of goods or services, which currently include, but are not necessarily limited to Cuba, Iran, Iraq, Libya,

North Korea, Sudan, and Syria, or to any national of any such country, wherever located, who intends to transmit or transport the Software

back to such country; (ii) to any person or entity who you know or have reason to know will utilize the Software in the design, development,

or production of nuclear, chemical, or biological weapons; or (iii) to any person or entity who has been prohibited from participating in

U.S. export transactions by any federal agency of the U.S. government. You warrant and represent that neither the BXA nor any other U.S.

federal agency has suspended, revoked, or denied your export privileges.

6. DISCLAIMER OF WARRANTY. EXCEPT AS OTHERWISE PROVIDED IN THIS LICENSE OR IN THE LIMITED WARRANTY

APPLICABLE TO THE TV, MDEA MAKES NO OTHER WARRANTIES OF ANY KIND WHATSOEVER REGARDING THE SOFTWARE

AND HEREBY EXPRESSLY DISCLAIMS ALL WARRANTIES OF ANY KIND WHATSOEVER, EXPRESS OR IMPLIED, WITH

RESPECT TO THE SOFTWARE. ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXPRESSLY DISCLAIMED BY MDEA. IN

NO EVENT SHALL MDEA BE LIABLE TO YOU OR ANY THIRD PARTIES, IN CONTRACT, IN TORT OR OTHERWISE, FOR ANY

DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND OR NATURE. BECAUSE SOME

JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF IMPLIED WARRANTIES, THE ABOVE LIMITATION MAY

NOT APPLY TO YOU.

7. LIMITATION OF LIABILITY. MDEA SHALL NOT, UNDER ANY CIRCUMSTANCES BE LIABLE TO YOU OR ANY THIRD

PARTIES FOR ANY DAMAGES OF ANY NATURE, WHETHER INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR

OTHERWISE, INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOST PROFITS, LOSS OF GOOD WILL OR EXPENDITURES

MADE OR COMMITTED FOR IN RELIANCE ON THE CONTINUATION OF THIS LICENSE. YOU AGREE THAT NEITHER MDEA'S

BREACH OF THIS LICENSE NOR ITS FAILURE TO REPAIR A DEFECT, ERROR OR BUG SHALL CONSTITUTE A FAILURE OF THE

ESSENTIAL PURPOSE OF THIS LICENSE. BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION

OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. MDEA's

liability to you for direct damages for any cause whatsoever and regardless of the form of the action, will be limited to the money

paid by you for the TV (based on fair market value of the TV) that caused the damages.

8. GENERAL. This License Agreement will be governed by the laws of the State of California.

For assistance call 1(800) 332-2119

Trademark and License information 35

GNU General Public License

Version 2, June 1991

675 Mass Ave, Cambridge, MA 02139, USA

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away your freedom to share and changeit. By contrast, the GNUGeneralPublic Licenseis intended to guarantee your freedom to share and

changefree software--to make surethe software isfree for all itsusers. ThisGeneralPublic Licenseappliesto most of theFreeSoftware Foundation'ssoftware and toany other programwhose authors

committo using it. (Someother FreeSoftware Foundationsoftware iscoveredby the GNULibraryGeneralPublic Licenseinstead.) Youcan apply itto your programs,too.

When we speak of free software we are referringto freedom, not price. Our GeneralPublicLicensesare designedto makesure that you have thefreedom to distribute copies of freesoftware (andchargefor

ths eerv ce f you wsh, that you rece vesource code or canget t f you want it, that you canchange the software oruse pieces of it in new freeprograms; and that you know you can do thesethings.

To protect your rights, we needto makerestrictions that forbid anyone to deny you these rights orto askyou to surrenderthe rights. Theserestrictions translateto certain responsibilitiesfor you if you

distributecopies of thesoftware, or if you modify it.

Forexample if you distribute copiesof such aprogram,whether gratis orfor afee, you mustgivethe recipients all the rights that you have. Youmust makesurethat they, too, receiveor can getthe source

code. And you must show them theseterms so they know the r r ghte.

We protect your rights with two steps: (1)copyright the software,and (2) offer you this licensewhich gives you legal permissionto copy,distribute and/or modify the software.

Also for each author's protection and ours we want to makecertain that everyoneunderstandsthatthere is no warranty forthis freesoftware. Ifthe software is modified bysomeone elseandpassedon, we

want ts rec pents to know that what they have s not theor g na, so that anyprob eros ntroduced byothers w not ref ect on the org na authors reputat one.

Finally anyf_e program is threatenedconstan!ly by software patents. We wish to avoid the dangerthat redistributors of a,free programwill individually obtain patent licenses,in effect making the program

propnetary, toprevent th s,we nave maae t ctearthat any patent must be tcensedfor everyonee Treeuse or not ceneeoat a.

The precise terms and conditions for copying, distribution and modificationfellow.

GNU GENERALPUBLICLICENSE

TERMS AND CONDiTiONS FORCOPYING,DISTRIBUTION AND MODIFICATION

O.This Licenseapplies to any programor otherwork whichcontains a notice placed bythe copyright holder sayingit may be distributed underthe terms of this GeneralPublic License. The "Program",

below refersto anysuch program orwork, and a"work basedon the Program" means eithertee Program orany derivativework undercopyright law:that is to ear, a work containing the Programor a portion

of t, e therverbat mor w throodf cat onsand/or traneated nto another anguage. Herenafter, translat on s ncuded wthout m tat on nfhe term rood f caton. Each censee s addressed as you.

Activities otherthan copying distribution and modification are not coveredbythis License;they areoutside its scope. Theact of running the Program isnot restricted, andthe output from the Program is

coveredony f ts contents const tute a work basedon the Program ndependentof hayng been made byrunn ng the Program. Whetherthat efrue depends on what the Programdoes.

1. You maycopy and distribute verbatim copiesof the Program'ssource code asyou receiveit in anymedium provided that you conspicuouslyand appropriately publish on each copy anappropriate

copyright notice and disclaimer of warranty keep intact all the notices that referto this License and to the absence ofany warranty and give anyotherrecipients ofthe Program acopy of this Licensealong

with theProgram.

Youmaychargea fee for the physicalact of transferring a copy, and you mayat your optionoffer warranty protection in exchangefor afee.

2. You maymodify your copy or copiesof the Programor any portion of it thus forming a work basedon the Program and copy and distribute such modifications orwork underthe terms of Section 1above,

provided that you also meetall of these conditions:

a) You must cause themodified files to carry prominent notices stating that you changed the files and the dateof anychange.

b) You must cause any work that you distribute or publish,that in wholeor in part contains or isderived fromthe Program or anypart thereof,to be licensed asa whole at no chargeto all third parties

underthe terms ofthis License.

c) If the modified programnormally readscommandsinteractivelywhen run you must causeit when started running for such interactiveuse in the most ordinary way to print ordisplay an

announcementincluding anappropriate copyright notice and a notice that there isno warranty (orelse, saying that you provide awarranty) and that usersmay redistnbutethe program under these

conditions; and telling tee userhow to view a copy ofthis License. (Exception: if the Program itselfis interactivebut doesnot normally print such anannouncement your work based onthe Program

s not requ=redto prnt an announcement.

These requirementsapply to themodified work as awhole. If identifiable sections of that work are notderived from the Program and can be reasonablyconsideredindependent and separateworks in them-

selves then this License,and its terms, do notapply to those sections when you distributethem as separateworks. But when you distribute thesame sections as part of a whole whichis awork basedon

the Program,the d str but on ofthe whoe mustbe on theterms of th s Lcense, whose permesone for other ceneeesextend to theent re who e, and thus to each and every part regard ees of who wrote t.

Thus, it is not the intent of this section to claim rightsor contest your rights to work written entirelyby you; rather,the intent isto exercisethe right to control the distribution of derivativeor collective works

basedon the Program.

In addition mereaggregation of anotherwork not basedon the Programwith the Program(orwith awork basedon the Program)on avolumeof astorageor distribution mediumdoes notbring theother

work underthe scope of th e L cense.

3. You maycopy and distribute the Program (or awork based on it, underSection 2) in object code orexecutable form under theterms of Sections 1and 2 above provided that you also do oneofthe follow-

ing:

a) Accompany it with the completecorresponding machine-readablesource code which must be distributed underthe termsof Sections 1 and 2above on amedium customarilyused for software

interchange;or,

b) Accompany itwith awritten offer, validfor at least three years,to give anythird party, for a chargeno more thanyour cost of physicallyperferming source distribution, a complete machine-readable

copy of the corresponding sourcecode to be distributed underthe terms ofSections land 2aboveon a mediumcustomarily used forsoftware interchange or,

c) Accompanyit with the dormation you received asto the offer to distribute correspndingseurce code. (Thisalternativeis allowed onlyfor noncommercialdistribution and only if you receivedthe

programin objectcode or executable formwith such an offer, inaccord with Subsection b above.)

The source code for a work means the preferred form of thework for makingmodifications to it. For an executablework complete source code means all the source code for all modules it contains plus any

associatedinterface definition files plus thescripts used to control compilation and installation of the executable.However asa special exception the source code distributed need not include anythingthat

isnormally distributed (in either source or binary form) with the major components (compiler kernel and so on)of the operating system on which the executableruns unlessthat component itselfaccompa-

nes theexecutabe.

Ifdistribution of executable or object code is made byoffering accessto copy from a designatedplace then offering equivalentaccess to copy the source codefromthe same placecounts as distribution of

the source code, even thoughthird parties are notcompe ed to copy thesource a eng w th the ob ect code.

4. You maynot copy modify sublicense or distribute the Programexcept as expresslyprovidedunderthis License. Anyattempt otherwiseto copy modify sublicenseor distributethe Program isvoid and

will automatically terminate your rights underthis License. However parties who have receivedcopies or rights from you under this License will net have tEeirlicensesterminatedso long assuch parties

rernan n fu comp ance.

5. You arenot required to accept this License,since_ou havenot signed it. However,nothing else grants you permissionto modifX or distribute theProgramor its derivative works. These actions are

prohibited by law if you do not accept this License. tnerefore,by modifying or distributing the Program (or anywork based on the t-'rogram),you indicateyour acceptance of thisLicense to do so, and all its

terms and conditions for copying,distributing or modifying the Programor works basedon it.

6. Eachtimeyou redistribute the Program (oranywork based on theProgram) the recipientautomatically receivesa license fromthe originallicensor tocopy, distributeor modify the Programsubjectto

these termsand cond tons. You maynot reposeany further restrct ons on the recp ents exercse ofthe rghts grantedhere n. Youare not responsb efor enforc ng comp ance by th rd part esto ths

License.

7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason(notlimited to patent issues),conditions areimposed on you (whether bycourt order, agreementor

otherwise)thatcontradict the conditions of this License,they do not excuseyou fromthe conditions of this License. Ifyou cannot distribute so asto satisfy simultaneously,your obligations underthis License

and anyother pertinent obligations thenas a consequence you maynot distributethe Program at all. For example,if a patent licensewould not permit royalty-free redistnbution of t]_eProgram by all those

who rece vecop es d rectyor nd rect y throughyou, then theon yway you cou d sat sfy both t andths L censewou d beto refran ent rey from dstr buttonof theProgram.

Ifany portion of this section is held invalid or unenforceableunder any particular circumstance, the balance of the section is intended to apply and the section as awhole is intended to apply in other circum-

stances.

It isnot thepurpose of thissection to induceyou to infringeany patents or other property right claimsor to contest validityof anysuch claims; this section has thesole purposeof protecting theintegrity of

the free software distribution system whichis implementedby public license practices. Many people have made generouscontributions to the wide range of software distributed through that system in reli-

ance on consstent app cat on ofthat system; t s up to the author/donor todec de f heor she s w ng to d str bu_esoftware through any othersystem and a censeecannot reposethatcho ce.

This section is intendedto makethoroughly clear what is believedto bea consequenceof the restofthis License.

8. Ifthe distribution and/or useof the Programis restricted in certain countries either by patents orby copyrighted interfaces,theoriginal copyright holder whoplacesthe Program underthis License may

add an explicit geographicaldistribution limitationexcluding thosecountries so that distribution is permitted only in or amongcountnes not tlius excluded. In such case this Eicense incorporates the limita-

tion asif written in t]_ebody of this License.

9. The FreeSoftware Foundation may publish revised and/or new versionsof the General Public Licensefrom time to time. Such new versionswill be similarin spirit to the presentversion, but maydiffer in

detailto address new problems or concerns.

Eachversionis given a distinguishingversion number. If the Programspecifies aversion number of this License whichapplies to it and "any later version",you have theoption of following the terms and con-

ditionseither ofihat version orof any laterversion publishedby t_neFreeSoftware Foundation. Ifthe Program doesnot specify a versionnumberof this License,you maychooseany versionever published

bythe FreeSoftware Foundation.

if you are interested in obtaining open source code for this product, please contact Mitsubishi at

(800) 332-2119. A nominal handling and mailing charge may apply.

For assistance call 1(800} 332-2119

36 Trademark and License information

10. Ifyou wishtoincorporatepartsoftheProgramintootherfree programs whose distribution conditions aredifferent, write to the author to askfor permission. For software which iscopyrighted bythe

FreeSoftware Foundation write to the Free Software Foundation;we sometimes makeexceptions for this. Our decision will be guided bythe two goals of preserving thefree status of all derivativesof our

freesoftware and of promot ng theshar ng andreuseofsoftware genera y.

NOWARRANTY

11. BECAUSETHEPROGRAMIS LICENSEDFREEOF CHARGE,THEREISNO WARRANTYFORTHEPROGRAM,TO THE EXTENTPERMITTEDBY APPLICABLELAW. EXCEPTWHENOTHERWISE

STATEDIN WRITINGTHE COPYRIGHTHOLDERSAND/OROTHERPARTIESPROVIDETHE PROGRAM"AS IS" WITHOUTWARRANTYOF ANYKIND, EITHEREXPRESSEDOR IMPLIED,INCLUDING.BUT

NOTLIMITEDTO THE IMPLIEDWARRANTIESOF MERCHANTABILITYANDFITNESSFORA PARTICULARPURPOSE.THE ENTIRERISK ASTO THEQUALITYANDPERFORMANCEOFTHEPROGRAM

S W TH YOU. SHOULDTHEPROGRAMPROVEDEFECTVE, YOUASSUMETHE COSTOF ALLNECESSARYSERVC NG,REPAR ORCORRECTON.

12. IN NO EVENTUNLESSREQUIREDBYAPPLICABLELAW ORAGREEDTOIN WRITINGWILL ANY COPYRIGHTHOLDER,OR ANY OTHERPARTYWHO MAYMODIFYAND/ORREDISTRIBUTETHE

PROGRAMAS PERMITTEDABOVE,BE LIABLETOYOU FORDAMAGES,INCLUDINGANY GENERAL,SPECIAL INCIDENTALOR CONSEQUENTIALDAMAGESARISINGOUTOF THE USEOR INABILITY

TOUSETHE PROGRAM(INCLUDINGBUT NOTLIMITEDTOLOSS OF DATAOR DATABEINGRENDEREDINACCURATEOR LOSSESSUSTAINEDBY YOUOR THIRDPARTIESOR A FAILUREOFTHE

PROGRAMTO OPERATEWITH ANYOTHERPROGRAMS),EVENIFSUCHHOLDEROR OTHERPARTYHASBEEN ADVISEDOFTHE POSSIBILITYOFSUCH DAMAGES.

GNU GENERAL PUBLIC LICENSE

Version3,29June2007

Everyonespermtted to copyand dstrbuteverbatm copesot th s censedocument,butchangng t s nota owed,

Preamble

TheGNUGeneralPublicLicenseis a free,copyleftlicensefor softwareandotherkindsof works,

Thelicensesfor mostsoftwareandotherpracticalworksaredesignedto takeawayyourfreedomto shareandchangetheworks,By contrast,theGNUGeneralPublicLicenseisintendedto Guaranteeyourfreedomto share

andchangeallversionsof a proGram-4omakesureit remainsfreesoftwarefor all its users,We the FreeSoftwareFoundationusefhe GNUGeneralPublicLicensefor mostof oursoftware if appliesalsoto anyotherwork

releasedt_iswaybyits authors,_/oucanapplyk to yourprograms,too,

Whenwe speakof freesoftware,wearerefernngto freedom,notprice,OurGeneralPublicLicensesaredesignedto makesurethatyouhavethefreedomto distrbutecopiesof freesoftware(andchargefor themif youwish),

thatyoureceivesourcecodeorcangetit if youwant it,that youcanchangethe softwareorusepiecesof it in newfree programs,and thatyouknowyoucando thesethings.

To£rotectyourrightswe needto preventofhersfromdenyingyouthesenghtsor askingyouto surrenderthe rights.Thereforeyou havecertainresponsibilitiesif youdistributecopiesof thesoftwareor if youmodifyit: respon-

sibilitiesto respectthefreedomof others.

Forexample,if youdistributecopiesof sucha program,whethergratisorfor a fee,youmust passonto the recipientsthe samefreedomsthat youreceived.Youmustmakesurethatthey,too,receiveor cangetthe source

code.Andyoumustshowthemthesetermssotheyknowtheirrights.

Developersthat usetheGNUGPLprotectyourrightswithtwosteps:(1)assertcopyrightonthesoftware,and(2)offeryouthis Licensegivingyoulegalpermissionto copy,distributeand/ormodifyit.

Forthedevelopers'andauthors'protection,theGPLclearlyexplainsthat thereis nowarrantyfor thisfreesoftware.Forbothusers'and authors'sake,theGPLrequiresthat modifiedversionsbemarkedaschanged,sothat

theirproblemswill notbeattributederroneouslyto authorsof previousversions.

Somedevicesaredesignedto denyusersaccessto installor runmodifiedversionsofthe softwareinsidethem,althoughthe manufacturercando so,This isfundamentallyincompatiblewiththeaimof protectingusers'free-

domto changethe soffware,Thesystematicpatternof suchabuseoccursintheareaof productsfor individualsto use,whichispreciselywhereit is most unacceptable.Therefore.wehavedesignedths versionof theGPLto

prohibitthe practicefor thoseproducts.If suchproblemsarisesubstantiallyin otherdomains,westandreadyto extendthisprowsionto thosedomainsinfutureversionsofthe GPL,asneededto protectthefreedomof users.

Finally,everyprogramisthreatenedconstantlybysoftwarepatents.Statesshouldnotallowpatentsto restrictdevelopmentand useof softwareon general-purposecomputers,butinthosethatdo,we wishto avoidthe special

dangerthat patentsappliedto a freeprogramcouldmakeit effectivelyproprietary,Topreventthis the GPLassuresthat patentscannotbeusedto renderthe programnomfree,

Theprecsetermsan8 condtons for copyng,d strbut onand modf cat onfo ow.

TERMSAND CONDITIONS

O,Definitions,

'ThisLicense"refersto version3of theGNUGeneralPublicLicense.

"Copyright"alsomeanscopyrightdikelawsthat applyto otherkindsof works suchassemiconductormasks,

"TheProgram"refersto anycopyrightableworklicensedunderthis License.Eachlicenseeisaddressedas "you"."Licensees"and 'recipients"maybeindividualsororganizations.

To'modify"a workmeansfo copyTromoradaptall or partof theworkinafashionrequiringcopyrightpermissionotherthanthemakingof anexactcopy.Theresultingworkiscalleda"modifiedversion"of theearlierworkor a

work basedon theear erwork.

A "coveredwork"meanseithertheunmodifiedProgramora workbasedon theProgram,

To"propagate"a workmeansto doanythingwithit that withoutpermissionwouldmakeyoudirectlyor secondarilyliablefor infringementunderapplicablecopyrightlaw exceptexecutingit onacomputeror modifyinga

privatecope/.Propagationincludescopying,distribution(withor withoutmodification),makingavailableto the public,andin somecountriesotheractivitiesas well

To'convey awork meansanykindof 15ropagationthat enablesotherpartiesto makeor receivecopies.Mereinteractionwithauserthrougha computernetwork,with notransferof a copy,is notconveying.

Aninteractiveuserinterfacedisplays"AppropriateLegalNotices"to the extentthat it includesa convenientand prominentlyvisiblefeaturethat (1)displaysanappropriatecopyrightnotice,and (2)tellsthe userthatthereisno

warrantyfor thework(exceptto the extentthatwarrantiesareprovided)that licenseesmayconveytheworkunderthis Licenseandhowto view a copyof thisLicense.Ifthe interfacepresentsa list of usercommandsor op-

tons, suchasamenu,apromnenttom n the st meetsth s crter on.

f, SourceCode.

The"sourcecode" for a workmeansthepreferredform of the workfor makingmodificationsto it."Objectcode" meansanynon-sourceform of a work.

A "StandardInterface"meansaninterfacethateitherisan officialstandarddefinedby a recognizedstandardsbody,or, inthe caseof interfacesspecifiedfor a particularprogramminglanguage,onethat iswidelyusedamong

developersworkinginthat language,

The"SystemLibraries"of anexecutableworkinclude , otherthantheworkasa whol_ includedinthenormalformof _nd(b)

seryesonlyto enableuseofthe workwiththat Ma )lement it,

those

activities, _otpartofthework,For

specificallydesignedto

2. BasicPermissions.

that userscan Source.

AllrightsgrantedunderthisLicensearegrantedforthetermof copyrightontheProgram,and areirrevocableprovidedthestated conditionsaremet.ThisLicenseexplicitlyaffirmsyourunlimitedpermissionto runtheunmodi-

fiedProGram.Theoutputfromrunningacoveredwork iscoveredbythis Licenseonlyif theoutput givenits content constitutesa coveredwork.ThisLicenseacknowledgesyournghtsof fairuseorotherequivalentas

pr_rovidedbycopyrightlaw.

Youmaymake,runandpropagatecoveredworksthatyoudo not convey,withoutconditionssolong asyourlicenseotherwiseremainsin force,Youmayconveycoveredworksto othersfor the solepurposeof havingthem

makemodificationsexclusivel_for you,orprovideyouwithfacilitiesfor runningthoseworks,providedthat youcomplywiththetermsof thisLicenseinconveyingallmaterMfor whichyoudo notcontroicopyright,T_osethus

makingor runningthecoveredworksfor youmustdo so exclusivelyonyourbehalf,underyourdirectionandcontrol,ontermsthat prohibitthemfrom makinganycopiesof yourcopyrightedmaterialoutsidetheirrelationship

withyou.

Conveyingunderanyothercircumstancesispermittedsolelyundertheconditionsstatedbelow.Sublicensingis notallowed;section10makesit unnecessary.

3. ProtectingUsers' LegalRights FromAnti-CircumventionLaw,

Nocoveredworkshallbedeemedpart of aneffectivetechnologicalmeasureunderanyapplicablelawfulfillingobligationsunderarticle11of theWlPOcopyrighttreatyadoptedon 20December1996,or similarlawsprohibiting

orrestrictingcircumventionof suchmeasures,

Whenyou conveyacoveredwork youwaiveanylegalpowerto forbid circumventionof technologicalmeasuresto theextentsuchcircumventionis effectedbyexercisingrightsunderthisLicensewithrespectto thecovered

work,andyoud sca m any ntentonto m t operaton ormodf cat onof theworkasameansof enforcng,agenst theworks users,youror th rdpartes ega r ghtsto forb8 c mumventonof technoogca measures.

4. ConveyingVerbatimCopies.

Youmayconveyverbatimcopiesof theProgram'ssourcecodeas youreceiveit in anymediumprovidedthat youconspicuouslyandappropriatelypublishoneachcopyan appropriatecopyrightnotice keepintactall notices

statingthatthisLicenseandanynon-permissivetermsaddedinaccordwithsectionTapplyto the code;keepintactall noticesofthe absenceof anywarranty;andgiveall recipientsacopyof:IbisLicensealongwiththe

r_.__(ougr_.charge anypriceornopricefor eachcopythatyou convey,andyoumayoffersupportor warrantyprotectionfore fee,

5. ConveyingModifiedSourceVersions. orthe modificationsto )reduceit fromtheProgramin theformof sourcecode underthetermsof section4 providedthatyoualsomeetall of theseconditions:

a reeventdate. uirementin section4 to "keepintactallnotices",

7additionalterms,to the wholeofthe

receivedit.

Iftheworkhas is[o termalargerprograminoron avolume

ora storageorols_nou_lonn copyrightarenotusedto limittheaccessdrlegalr ghtsof the comp atons usersbeyondwhatthe ndv due workspermt, nc u_

sionof acoveredworkin an oftheaggregate.

6. ConveyingNon-SourceForms.

Youmayconveyacoveredworkin objectcodeformunderthetermsof sections4and5 12rovidedthat youalsoconveythemachine-readableCorrespondingSourceunderthetermsof this License.inone oftheseways:

a)Oonveytheobjectcode in,or embodiedin, aphysicalproduct(includingaphysicaldistnbutionmedium),accompaniedbythe CorrespondingSourcefixedon adurablephysicalmediumcustomarilyusedfor softwareinter-

change.

b)Oonveytheobjectcode in,or embodiedin, aphysicalproduct(includingaphysicaldistributionmedium),accompaniedbya writtenoffer,validfor at leastthreeyearsandvalidfor as longasyouofferspareparts orcustomer

supportforthat productmodel,to giveanyonewhopossessesthe objectcodeeither(1)acopyof theCorrespondingSourcefor allthe softwareinthe productfhat is coveredbythis License,on adurablephysicalmedium

customarilyusedfor softwareinterchange,for a pricenomorethanyourreasonablecost of physicallyperformingthisconveyingof source,or (2)accessto copytheCorrespondingSourcefroma networkserverat nocharge.

c)Conveyindividualcopiesof theobjectcodewitha copyof thewrittenofferto providetheCorrespondingSource.Thisalternativeis allowedonlyoccasionallyand noncommerciallyandonly ifyou receivedtheobjectcode

withsuchanoffer,in accordwithsubsection6b,

d)Conveytheobjectcode byofferingaccessfroma designatedplace(gratisor for acharge)and offerequivalentaccessto theCorrespondingSourceinthesamewaythroughthesameplaceat nofurthercharge,Youneed

notrequirerecipientsto copythe CorrespondingSourcealongwithteeobjectcode,Ifthe placeto copytheobjectcode isa networkserver,the CorrespondingSourcemay beona differentserver(2peratedb_youor a third

party)thatsupportsequivalentcopyingfacilities,providedyoumaintaincleardirectionsnextto theobjectcode sayingwhereto findtheCorrespondingSource.Regardlessof whatserverhoststhe L,orrespondingSource,you

For assistance call 1(800} 332-2119

Trademark and License information 37

remainobligatedto ensurethat it isavailablefor aslongasneededto satisfytheserequirements,

e)Oonveytheobjectcode usingpeer-to-peertransmission,providedyouinformotherpeerswherethe objectcode andCorrespondingSourceof the workarebeingofferedto the generalpublicat nochargeundersubsection

6d.

Aseparableportionof theobjectcode,whosesourcecodeis excludedfromtheCorrespondingSourceasa SystemLibrary,neednotbeincludedinconveyingtheobjectcode work.

A'User Product"iseither(1)a "consumerproduct",which meansanytangiblepersona(properlywhich isnormallyusedfor personal,family,orhouseholdpurposes,or(2)anythingdesignedor soldfor incorporationintoa

dwelling.In determiningwhethera productis a consumerproduct,doubtfulcasesshallbe resolvedinfavor of coverage.Fora particularproductreceivedbya particularuser."normallyused"refersto a typicalorcommon

useof that classof product,regardlessof thestatusof theparticularuseror of thewayin whichtheparticularuseractuallyuses,or expectsor is expectedto use,the product.A productisa consumerproductregardlessof

whetherthe producthassubstantialcommercial,industrialor non-consumeruses,unlesssuchusesrepresenttheonlysignificantmodeof useof the product.

"InstallationInformation"for aUserProductmeansanymethodsproceduresauthorizationkeys orotherinformationrequiredto installandexecutemodifiedversionsof acoveredworkin that UserProductfroma modified

versionof its CorrespondingSource.Theinformationmustsufficeto ensurethat thecontinuedfunctioningof themodifiedobjectcodeisin nocasepreventedorinterferedwithsolelybecausemodificationhasbeen made.

Ifyouconveyanobject codeworkunderthissectionin,orwith,orspecificallyfor usein,aUserProduct,andthe conveyingoccursaspartofatransactioninwhichtherightof possessionanduseofthe UserProductistrans-

ferredto the recipientin perpetuityor for afixedterm(regardlessof howthetransactionis characterized)theCorrespondingSourceconveyedunderthissectionmustbeaccompaniedbytheInstallationInformation,Butthis

requirementdoesnotapply if neitheryounoranythirdpartyretainsthe abilityto installmodifiedobjectcodeontheUserProduct(forexample,the workhasbeeninstalledin RUM),

Therequirementto provideInstallationInformationdoes notincludearequirementto continueto providesupportservice,warranty orupdatesfor aworkthat hasbeenmodifiedorinstalledbytherecipient,orforthe User

Productnwhch t hasbeenmudfed or nsta ed,Accessto a networkmaybedened whenthemudf cat on tsef matera y and adversey affectsthe operatonof thenetworkor v oatestherues andprotocos for communca-

tionacrossthenetwork.

CorrespondingSourceconveyedandInstallationInformationprovided inaccordwiththissectionmustbe inaformatthatispubliclydocumented(andwith animplementationavailabletothe publicin sourcecodeform),and

mustrequrenospeca passwordor keyfor unpackng,readngorcopyng,

7.AdditionalTerms.

'Additionalpermissions'aretermsthat supplementthetermsof this Licenseby makingexceptionsfromoneor moreof its conditions,Additionalpermissionsthatareapplicableto the entireProgramshallbetreatedasthough

theywereincludedin thisLicense,to the extentthattheyarevalidunderapplicablehw,If additionalpermissionsapplyonlyto part of theProgram,that partmaybeusedseparatelyunderthosepermissions,but theentire

Programremainsgovernedbythis Licensewithoutregardto theadditionalpermissions.

Whenyouconveya copyof a coveredwork,you mayat youroptionremoveanyadditionalpermissionsfromthat copy,orfrom anypartof it,(Additionalpermissionsmay bewrittento requiretheirown removalin certaincases

whenyou modifythework,)Youmayplaceadditionalpermissionsonmaterial,addedbyyouto acoveredwork,for Whichyou haveorcan giveappropriatecopyrightpermission.

Notwithstandinganyotherprovisionof this License,formaterialyouadd to a coveredwork,youmay(ifauthorizedby thecopyrightholdersofthat material)supplementthe termsof thisLicensewithterms:

a)Disclaimingwarrantyor limitingliabilitydifferentlyfromthetermsof sections15and16 ofthis License;or

b)Requiringpreservabonofspecifiedreasonablelegalnoticesor authorattributionsinthatmaterialor intheAppropriateLegalNoticesdisplayedbyworkscontainingit; or

c)Proflibitingmisrepresentationof the originof thatmaterial,orrequiringthat modifiedversionsof suchmaterialbemarkedmreasonablewaysas differentfrom the originalversion;or

d)Limitingtheusefor publicitypurposesof namesof licensorsorauthorsof thematerial;or

e)Decliningtogrant rightsundertrademarklawfor useof sometradenames,trademarks,orservicemarks;or

f)Requiringindemnificationof licensorsandauthorsof that materialbyanyonewho conveysthe material(ormodifiedversionsof it) withcontractualassumptionsof liabilityto the recipient,for anyliabilitythatthesecontractual

assumpbonsdirectlyimposeonthoselicensorsandauthors,

Allothernon-permissaveadditionaltermsareconsidered"furtherrestrictions"withinthemeaningof section10.If theProgramas youreceivedit oranypartof it containsanoticestatingthat it isgovernedbythis Licensealong

withatermthat isa furtherrestriction,youmay removethat term,If a licensedocumentcontainsa furtherrestrictionbutpermitsrelicensingorconveyingunderthis License,you mayadsto a coveredworkmaterialgovernedby

thetermsof that licensedocumentprovidedthat thefurtherrestrictiondoesnotsurvivesuchreiicensingorconveying,

Ifyou addtermsto a coveredworkin accordwiththissection,youmust place,inthe relevantsourcefiles,a statementof theadditionaltermsthat applyto thosefiles,or anoticeindicatingwhereto findthe applicableterms,

Additionalterms,permissiveornon-permissive,maybe statedinthe formof a separatelywrittenlicense,orstatedasexceptions;the aboverequirementsapplyeitherway.

8.Termination,

Youmaynot propagateormodifyacoveredworkexceptasexpresslyprovidedunderthis License.Anyattemptotherwiseto propagateor modifyit is void andwill automaticallyterminateyourrightsunderthis License(includ-

inganypatentlicensesgrantedunderthethird paragraphof section1I).

Howeverif youceaseall violationof thisLicensethenyour licensefrom aparticularcopyrightholderis reinstated(a)provisionallyunlessanduntil thecopyrightholderexplicitlyandfinallyterminatesyourlicenseand (b)

permanently,ifthecopyrightholderrahsto notiryyouotthe vioaationoy somereasonablemeanspriorto 60daysafterthecessation,

Moreover.yourlicensefromaparticularcopyrightholderisreinstatedpermanentlyif thecopyrightholdernotifiesyouof theviolationbysomereasonablemeans,this isthefirsttimeyou havereceivednoticeof violationof this

License(foranywork)fromthat copyrightholder,andyoucurethe viohtionpriorto 30daysafteryourreceiptof the notice,

Terminabonof yourrightsunderthissectiondoesnot terminatethe licensesof partieswho havereceivedcopiesor rightsfromyou underthis License,If yourrightshavebeenterminatedand notpermanentlyreinstatedyou do

notqua fyto recevenew censesfor thesamematera undersect on10,

9.AcceptanceNotRequiredfor HavingCopies.

Youarenotrequiredto acceptthisLicenseinorderto receiveor runa copyofthe Program.Ancillarypropagationof acoveredworkoccurringsolelyas aconsequenceof usingpeer_to-peertransmissionto receivea copy

likewisedoesnot requireacceptance,HowevernothingotherthanthisLicensegrantsyoupermissionto propagateor modifyanycoveredwork.Theseactionsinfringecopyrig_tifyoudo not acceptthis License.Therefore,by

mudfy ngor propagatnga coveredwork,you ndcateyouracceptanceof th s Eicenseto do so,

10.Automatic Licensingof DownstreamRecipients.

Eachtimeyouconveya coveredwork,the recipientautomaticallyreceivesalicensefromtheoriginallicensors,to run, modifyandpropagatethatwork, subjectto thisLicense,Youarenotresponsiblefor enforcingcompliance

bythirdpartieswiththisLicense.

An"enti!ytransaction"is atransactiontransferringcontrolof anorganizationorsubstantiallyallassetsof one or subdividinganorganizationormergingorganizations,If propagationof a coveredworkresultsfrom anentity

transactioneachpartyto thattransactionwho receivesa copyof theworkalsoreceiveswhateverlicensesto theworkthe party'spredecessorin interesthador couldgiveunderthe previousparagraphplusa rightto posses-

sionof theCorrespondingSourceof theworkfromthepredecessorininterest,ifthepredecessorhasit orcan getit withreasonableefforts.

Youmaynot imposeanyfurfherrestrictionsontheexerciseof therightsgrantedor affirmedunderthis License,Forexampleyoumaynotimposea licensefee,royalty,or otherchargefor exerciseof rightsgrantedunderthis

Lcense,andyoumaynot ntate tgaton ncudnga cross-cam orcounterca m na awsut a egngthatanypatentc am is nfr ngedbymakng,usng,se ng,offerngfor sae,or mportngtheProgramoranyportonof t.

11.Patents.

A'contributor"is a copyrightholderwhoauthorizesuseunderthis Licenseof theProgramor a workonwhichtheProgramis based,Theworkthuslicensediscalledthe contributor's'contributorversion",

A contributor's'essentialpatentclaims"areall patentclaimsownedorcontrolledbythe contributor,whetheralreadyacquiredorhereafteracquiredthat wouldbeinfringedbysomemannerpermittedbythis Licenseof mak-

ing,using,or sellingits contributorversion,butdo notincludeclaimsthat wouldbeinfringedonlyasa consequenceof furthermodificationofthecontributorversion,For purposesof this definition,"control" includestherightto

grantpatentsublicensesina mannerconsistentwiththe requirementsofthis License,

Eachcontributorgrantsyoua non-exclusiveworldwide,royalty-freepatentlicenseunderthecontributor'sessentialpatentclaims,to make,use,sell,offerfor sale,importand otherwiserun,modifyandpropagatethecontents

of ts contrbututverson,

Inthefollowingthreeparagraphs,a"patentlicense"is anyexpressagreementorcommitment,howeverdenominated,not to enforceapatent(suchas anexpresspermissionto practiceapatentor covenantnotto suefor pat-

entinfringement).To"granl"sucha patentlicenseto a partymeansto makesuchan agreementor commitmentnot to enforcea patentagainsttheparty,

Ifyouconveyacoveredwork,knowanglyrelyingon apatentlicense,and the CorrespondingSourceof the workis notavailablefor anyoneto copy,fleeof chargeandunderthetermsofthis License,througha publiclyavailable

networkserverorotherreadilyaccess]h;lemeans,thenyoumusteither(1)causetheCorrespondinaSourceto besoavailable,or (2)arrangeto depriveyourselfof the benefitof thepatentlicensefor this particularwork,or (3)

arrangeina mannerconsistentwiththerequirementsof thisLicenseto extendthepatentIicense'_odownstreamrecipients,_Knowinglyrelying"meansyou haveactualknowledgethat butfor the patentlicenseyourconvey-

ingthecoveredwork inacountry oryourrecipient'suseofthecoveredworkinacountry wouldinfringeoneor moreidentifiablepatentsinthal countrythatyouhavereasonto Believearevalid.

If,pursuantto orin connectionwithasingletransactionor arrangement,you convey,orpropagateby procuringconveyanceof, acoveredwork,andgrant apatentlicenseto someofthepartiesreceivingthecoveredwork

authorizingthemto use,propagate,mod#yor conveyaspecificcopy ofthe coveredwork,thenthepatentlicenseyougrantisautomaticallyextendedto all recipientsof thecoveredworkandworksbasedonit,

A patentlicenseis"discnminatory"if it doesnot includewithinthe scopeof its coverage,prohibitstheexerciseof, oris conditionedonthe non-exerciseof one or moreof therightsthatarespecificallygrantedunderthis

License.Youmaynot conveyacoveredworkif youarea partyto anarrangementwith athirdpartythat is inthe businessof distributingsoftware underwhichyoumakepaymentto thethirdpartybasedontheextentof

youractivityof conveyingthework.andunderwhichthe thirdpart)!grants,to anyofthe partieswhowouldreceivethecoveredworkfromyou,adiscriminatorypatentlicense(a)inconnectionwit]_copiesof the coveredwork

conveyedByyou(or copiesmadefrom thosecopies)or (b)pnmarflyfor aridin connectionwithspecificproductsorcompilationsthatcontainthe coveredwork unlessyouenteredintothat arrangementor that patentlicense

wasgranted,priorto 28March2007.

NothinginthisLicenseshallbeconstruedas excludingor limitinganyimpliedlicenseor otherdefensesto infringementthat mayotherwisebeavailableto youunderapplicablepatentlaw.

12.NoSurrenderof Others' Freedom.

Ifconditionsareimposedonyou(whetherbycourtorder,agreementorotherwise)that contradicttheconditionsof thisLicensetheydo notexcuseyou fromtheconditionsof thisLicense.Ifyoucannotconveya coveredwork

soas to satisfysimultaneouslyyourobligationsunderthis l:mcenseandanyotherpertinentobligationsthenasa consequenceyoumaynotconveyitat all.Forexample,if youagreeto termsthat obligateyoufo collectaroyalty

forfurtherconveyng fromthoseto whomyouconveytheProgram,theony wayyou coud sabsfyboththosetermsandth s Lcerisewou dbeto refranentrey fromconveyngthe Program,

13.UsewiththeGNUAfferoGeneralPublicLicense.

Notwithstandinganyotherprovisionof this License,youhavepermissionto linkorcombineanycoveredworkwitha work licensedunderversion3of theGNUAfferoGeneralPublicLicenseintoasinglecombinedwork,and

to conveythe resultingwork, Thetermsof thisLicensewillcontinueto applyto the partwhichis thecoveredwork, butthespecialrequirementsof theGNUAfferoGeneralPublicLicense,section13,concerninginteraction

througha networkwilrapplyto thecombinationassuch.

f4. RevisedVersionsof this License.

TheFreeSoftwareFoundationmay publishrevisedand/ornewversionsof theGNUGeneralPublicLicensefromtimeto time,Suchnewversionswill besimilarin spiritto thepresentversion,but maydifferin detailto address

newproblemsor concerns.

Eachversionisgivena distinguishingversionnumber.Ifthe Programspecifiesthat acertainnumberedversionof theGNUGeneralPublicLicense"oranylaterversion"appliesto it,you havetheoptionof followingtheterms

andconditionseitherofthat numberedversionorof anylaterversionpublishedbythe FreeSoftwareFoundation,If theProgramdoesnot specifyaversionnumberof theGNUGeneralPublicLicenseyoumaychooseany

versioneverpublishedbytheFreeSoftwareFoundation,

Ifthe Programspecifiesthata proxycandecidewhichfutureversionsof theGNUGeneralPublicLicensecanbeused that proxy'spublicstatementof acceptanceof aversionpermanentlyauthorizesyouto choosethatver-

sionfor theProgram,

Laterlicenseversionsmaygiveyouadditionalordifferentpermissions.However,noadditionalobligationsareimposedon anyauthoror copyrightholderasa resultof yourchoosingto followa laterversion,

fS, Disclaimerof Warranty,

THEREISNOWARRANTY-FORTHEPROGRAM,TOTHEEXTENTPERMITTEDBYAPPLICABLELAW,EXCEPTWHENOTHERWISESTATEDINWRmNGTHECOPYRIGHTHOLDERSAND/OROTHERPARTIESPROVIDETHE

PROGRAM"ASIS"WITHOUTWARRANTYOFANYKIND,EITHEREXPRESSEDOR IMPLIEDINCLUDINGBUTNOTLIMITEDTO,THEIMPLIEDWARRANTIESOFMERCHANTABILITYANDFITNESSFORA PARTICULAR

PURPOSE,THEENTIRERISKASTOTHEQUALITYANDPERFORMANCEOFTHEPROGRA_ISWITHY_U, SHOULDTHEPROGRAMPROVEDEFECTIVE,YOUASSUMETHECOSTOFALLNECESSARYSERVICING,

REPAIRORCORRECTION,

16,Limitationof Liability.

IN NOEVENTUNLESSREQUIREDBY APPLICABLELAWORAGREEDTOIN WRITINGWILLANYCOPYRIGHTHOLDER,ORANYOTHERPARTYWHOMODIFIESAND/ORCONVEYSTHEPROGRAMAS PERMITTED

ABOVE,BELIABLETOYOUFORDAMAGES,iNCLUDINGANYGENERAL,SPECIALINCIDENTALORCONSEQUENTIALDAMAGESARISINGOUTOFTHEUSEOR iNABILiTYTOUSETHEPROGRAM(INCLUDINGBUTNOT

LiMiTEDTOLOSSOFDATAORDATABEINGRENDEREDINACCURATEOR LOSSE_SUSTAINEDBY YOUORTHIRDPARTIESORA FAILUREOFTHEPROGRAMTOOPERATEWITHANYOTHERPROGRAMS),EVENIF

SUCHHOLDEROROTHERPARTYHASBEENADVISEDOFTHEPOSSIBILITYOFSUCHDAMAGES,

17.Interpretationof Sections15and 16,

if thedisclaimerof warrantyand limitationof liabilityprovidedabovecannotbeqivenlocallegaleffectaccordingto theirterms reviewingcourts shallapplylocal lawthat mostcloselyapproximatesanabsolutewaiverof allcivil

liabilityin connectionwiththeProgram,unlessawarrantyorassumptionof iiab_ityaccompaniesa copyoftheProgramin returnfor afee,

For assistance call 1(800} 332-2119

38 Warranty

Mitsubishi LCD Fiat Panel HDTV Limited Warranty

MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. ("MDEA") warrants to the original purchaser of this LCD Flat Panel HDTV

that if purchased from an authorized MITSUBISHI Audio/Video Dealer, should it prove defective by reason of improper work-

manship and/or material:

a. Parts. All parts (except any software incorporated into this HDTV) are warranted for a period of one year from the date of the

original purchase at retail. We will repair or replace, at our option, any defective part without charge for the part. Parts used for

replacement may be replaced with those of like kind and quality and may be new or remanufactured. Parts used for replace-

ment are warranted for the remainder of the original warranty period.

b. Embedded Software. MDEA warrants that all software incorporated into this HDTV (the "Embedded Software") will

perform in accordance with the functional description of Embedded Software in all material respects, but MDEA does not

warrant that the Embedded Software is error-free. The warranty contained in this section shall continue for a period of one

year, from the date of the original purchase from the authorized dealer. If, after prompt notice within the warranty period, MDEA

determines that the Embedded Software has failed to perform in accordance with such functional description in all material

respects and if such failure is not due to accident, misuse, modification or misapplication of the Embedded Software, then

MDEA shall modify or replace the nonconforming Embedded Software at no charge to you, which at MDEA's sole discretion

may be fulfilled by means of modification or replacement software contained on a replacement memory card for Consumer

installation. The foregoing shall be MDEA's sole obligation to you under this limited warranty. All rights under this limited war-

ranty on the Embedded Software also subject to your compliance with the terms of the Software License Agreement appli-

cable to this HDTV, and this limited warranty on the Embedded Software shall be null and void if the Embedded Software is

modified or changed in any manner except as specifically authorized by MDEA.

c. Labor. For certain items that are designed to be replaced by the consumer, including (but not limited to) some Embed-

ded Software, the consumer is solely responsible for any replacement labor. For all other parts, we will provide the labor for a

warranty repair by an authorized MITSUBISHI service center without charge for one year from the original date of purchase at

retail.

d. Notice. To obtain warranty service, you must notify an authorized MITSUBISHI service center of any defect within the appli-

cable warranty time period.

BEFORE REQUESTING SERVICE, please review the TV owner's guide to insure proper installation and correct cus-

tomer control adjustment. If the problem persists, please arrange for warranty service.

1. TO OBTAIN WARRANTY SERVICE:

a. Contact your nearest authorized MITSUBISHI service center whose name and address can be obtained from your MIT-

SUBISHI dealer, by writing to the address provided below, calling MDEA at 800-332-2119, or using the support feature of our

website at www.Mitsubishi-tv.com.

b. Warranty service will be provided in your home or, if required, at an authorized service shop, provided that your television is

located within the geographic territory customarily covered by an authorized MITSUBISHI service center. If not, you must either

deliver your television to an authorized service location at your own expense, or pay for any travel and/or transportation costs

the service center may charge to and from you home. Actual service labor will be provided without charge.

c. Proof of purchase from an authorized MITSUBISHI dealer is required when requesting warranty service. Present your sales

receipt or other document which establishes proof and date of purchase. THE RETURN OF THE OWNER REGISTRATION

CARD IS NOTA CONDITION OF WARRANTY COVERAGE. However, please return the Owner Registration Card so that we can

contact you should a question of safety arise which could affect you.

2. THIS LIMITED WARRANTY DOES NOT COVER:

a. Up to .01% pixel outages (small dot picture elements that are dark or incorrectly illuminated).

b. Cosmetic damage or any other damage where such damage is caused by unauthorized modification, alteration, repairs to

or service of the product by anyone other than an authorized MITSUBISHI service center; physical abuse to or misuse of the

product (or any product damaged by excessive physical or electrical stress); any products that have had a serial number or any

part thereof altered, defaced or removed; product use in any manner contrary to the Owner's Guide; freight damage; or any

damage caused by acts of God or other factors beyond the reasonable control of MDEA, such as power surge damage caused

by electrical system or damages caused by use of third party mounting brackets or stands. This limited warranty also excludes

service calls where no defect in the product covered under this warranty is found, service calls related to unsatisfactory audio

or visual reception or signal unless caused by a defect in the product that is covered under this limited warranty, all costs,

expenses or any other damages arising from product installation, removal from or re-installation into custom installations or on

For assistance call 1(800} 332-2119

Warranty 39

wall mountings, or set-ups, any adjustments of user controls (including contrast, brightness, color, tint, fine tuning, sharpness),

other adjustment necessary to prepare the unit for display or use, connection with any external audio receiver, antenna, cable

or satellite systems, or service of products purchased or serviced outside the U.S.A. Please consult the operating instructions

contained in the Owner's Guide furnished with the product for information regarding user controls.

3. ANY EXPRESSWARRANTY NOT PROVIDEDHEREIN, AND ANY REMEDY WHICH, BUT FOR THIS PROVISION, MIGHT

ARISE BY IMPLICATION OR OPERATION OF LAW, IS HEREBY EXCLUDEDAND DISCLAIMED. THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND OF FITNESS FOR ANY PARTICULAR PURPOSEARE EXPRESSLY LIMITED TO A TERM OF

ONE YEAR.

4. UNDER NO CIRCUMSTANCES SHALL MDEA BE LIABLE TO PURCHASER OR ANY OTHER PERSON FORANY INCI-

DENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF

CONTRACT, OR OTHERWISE.

5. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental,

special, or consequential damages, so the above limitations or exclusions may not apply to you.

6. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

7. In the event of any dispute under this limited warranty, jurisdiction and venue for resolving that dispute will be in the state

where the television was purchased and the laws of such state will govern. In no event shall Mitsubishi have any liability, includ-

ing with out limitation, for general, consequential, incidental, or special damages for loss, destruction, damage or corruption

of recorded data, media or software resulting from use of this television, or cost of recovery of lost data, media or software

therefore.

•MITSUBISHI

MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC.

9351 Jeronimo Road

Irvine, CA 92618-1904

Network Service Disclaimer

Third party content and services, including without limitation home entertainment services by VUDU, Inc., are provided

in accordance with whatever terms and conditions are established by the third party providers and agreed to by you.

Mitsubishi Digital Electronics America ("MDEA') has no control over any such third parties or any agreement you reach

with them. MDEA has no control over the networks or transmission facilities by which content and services are provided

by third parties. Your connection to the internet may vary in availability and quality. Customer service questions are to

be directed to the third-party provider, not MDEA.

MDEA DOES NOT WARRANT CONTENT OR SERVICES PROVIDED BY ANY THIRD PARTY, EITHER EXPRESSLY OR

IMPLIEDLY, FOR ANY PURPOSE. MDEA DOES NOT WARRANT THAT ANY THIRD PARTY SERVICE WILL REMAIN

AVAILABLE FOR ANY PERIOD OF TIME OR THAT IT WILL BE SATISFACTORY, UNINTERRUPTED OR ERROR FREE.

MDEA EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO ANY THIRD PARTY CONTENT

AND SERVICES.

MDEA WILL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE, WHETHER IN CONTRACT OR TORT OR OTHER

LEGAL THEORY, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY

FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN CONNECTION WITH, YOUR USE OF ANY

CONTENT OR SERVICE THAT IS PROVIDED TO YOU BY ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY

OF SUCH DAMAGES.

For assistance call 1(800} 332-2119

_ITSUBiSHI

ELECTRIC

Website:

www.rnitsubishi=tv.corn

E-mail:

MDEAservice@rndea.corn

Call Consumer Relations for operational or connection assistance at

800-332-2119

To order replacement or additional

remote controls or NetCommand IR emitters,

Visit our website www.mitsuparts,com

or call

800-553-7278

SYSTEM RESET

If the TV does not respond to the remote control,

control-panel buttons, or will not power on/off,

press and hold the POWERbutton on the control

panel for ten seconds.

The TV will turn off. Power on the TV and the green

LED will flash quickly for about one minute. Recent

settings changes may be lost.

For Your Records

Record the model number, serial number, and

purchase date of your TV. The model and serial

numbers are on the back of the TV. Refer to this

page when requesting assistance with the TV.

MODEL NUMBER

SERIAL NUMBER

PURCHASE DATE

RETAILER NAME

LOCATION

VLP43/+/++

Mitsubishi LT 40164 User Manual LCD TELEVISION Manuals And Guides 1006335L

Navigation menu

Versions of this User Manual:

Views

Navigation