Mitsubishi M341I Operation Manual

M341i - Operations Manual M341i_EN Free User Guide for Mitsubishi Mobile Phone, Manual

2015-07-27

: Mitsubishi Mitsubishi-M341I-Operation-Manual-776311 mitsubishi-m341i-operation-manual-776311 mitsubishi pdf

Open the PDF directly: View PDF .
Page Count: 80

This guide describes the operation of the GSM telephone M341i.

Edition 1, 2003. © Melco Mobile Communications Europe S.A., 2003

Whilst every effort has been made to ensure the accuracy of the instructions contained in this guide, Melco

Mobile Communications Europe S.A. reserves the right to make improvements and changes to the product de-

scribed in this guide and/or to the guide itself, without prior notice.

Melco Mobile Communications Europe S.A. is a Mitsubishi Group Company.

Table of contents

TABLE OF CONTENTS

PAGE4YOUR M341I

CLOSED CLAMSHELL ____________________________ 4

OPEN CLAMSHELL _____________________________ 5

PRELIMINARY OPERATIONS _______________________ 6

PAGE7GETTING STARTED

PREPARING THE PHONE FOR OPERATION _____________ 7

BASIC OPERATIONS ____________________________ 7

PAGE10 USING THIS GUIDE

PAGE12 INTRODUCTION

SAR _______________________________________ 12

DECLARATION OF CONFORMITY ___________________ 13

GENERAL SAFETY _____________________________ 13

VEHICLE SAFETY _____________________________ 13

EMERGENCY CALLS ___________________________ 14

CARE AND MAINTENANCE _______________________ 14

AC/DC ADAPTOR CHARGER ______________________ 14

BATTERY USE _______________________________ 14

PC CABLE __________________________________ 15

YOUR RESPONSIBILITY _________________________ 15

SECURITY CODES _____________________________ 15

DISPOSING OF WASTE PACKAGING ________________ 15

PAGE16 TOOLS

DIARY _____________________________________ 16

CALCULATOR ________________________________ 19

CURRENCY CONVERTER ________________________ 19

ALARM CLOCK _______________________________ 20

INFRARED PORT ______________________________ 20

USING YOUR MOBILE AS A MODEM ________________ 21

PAGE22 MESSAGES

READING A RECEIVED SMS MESSAGE ______________ 22

READING STORED SMS MESSAGES ________________ 22

MOVING MESSAGES TO SIM ______________________ 22

FORWARDING MESSAGES _______________________ 23

ACTIVATING OR DEACTIVATING THE MESSAGE

ALERT TONE ________________________________ 23

PREPARING THE PHONE TO SEND SMS MESSAGES _____ 23

ENTERING TEXT ______________________________ 24

CREATING TEXT MODELS _______________________ 26

EDITING A TEXT MODEL ________________________ 26

SENDING A NEW SMS MESSAGE __________________ 26

SIGNATURE _________________________________ 27

OUTBOX AND SIM ARCHIVE EMITTED MESSAGES _______ 27

STATUS REQUEST ____________________________ 27

STORAGE CONSUMPTION _______________________ 28

BROADCAST - CELL BROADCAST (CB) MESSAGES ______ 28

PAGE30 CALLS & TIMES

CALLS LOG _________________________________ 30

CALL TIMERS ________________________________ 30

CALL COSTS - MANAGEMENT _____________________ 31

RECORDED CALL _____________________________ 32

Table of contents

PAGE33 PHONEBOOK

STORING NAMES AND TELEPHONE NUMBERS _________ 33

EDITING A PHONEBOOK OR A SIM NAME CARD _________ 34

VIEWING AND CALLING PHONEBOOK NUMBERS ________ 35

VOICE DIALLING ______________________________ 35

FREE SPACE IN THE PHONEBOOK __________________ 36

CREATING A GROUP OF CARDS ___________________ 36

MY CARD ___________________________________ 37

MY NUMBER(S) DISPLAY ________________________ 37

FIXED DIALLING NUMBERS _______________________ 37

EXPORT ____________________________________ 38

PAGE39 CAMERA

MOBILE POSITIONING ___________________________39

TAKING A PICTURE ____________________________ 40

ADJUSTING YOUR PICTURE ______________________ 41

STORING/ERASING YOUR PICTURE _________________ 42

SELF TIMER _________________________________ 42

PAGE43 FUN & MEDIA BOX

PICTURES ___________________________________ 43

MELODIES ___________________________________45

GAMES & APPLICATIONS ________________________ 45

SPEECH NOTES _______________________________ 46

OTHERS ____________________________________ 47

STORAGE USED ______________________________ 48

PAGE49 CALENDAR

PAGE49 NETWORK SERVICES

PAGE50 I-MODE

USER INTERFACE _____________________________50

I-MODE MENU ________________________________ 50

I-MODE APPLICATIONS __________________________ 51

MAIL SYSTEM ________________________________54

MAIL SYSTEM SETTINGS _________________________ 57

QUICK ACCESS TO I-MODE BASIC FEATURES __________ 59

PAGE60 SETTINGS

TONES _____________________________________ 60

DISPLAY ____________________________________ 61

KEYPAD ____________________________________ 62

VOICE MAIL __________________________________ 63

PHONE SETTINGS _____________________________ 64

GSM SERVICES _______________________________ 66

SECURITY FEATURES ___________________________70

PAGE72 APPENDIX

GLOSSARY __________________________________ 72

TROUBLE SHOOTING ___________________________73

ERROR MESSAGES ____________________________ 74

GUARANTEE _________________________________ 76

PAGE77 INDEX

Your M341i

YOUR M341i

CLOSED CLAMSHELL

External

screen

Infrared port

Side key

Short press:

reject/end a call

Long press:

start camera

preview

Power

connector

Camera lens Earpiece

PC cable

connector

Your M341i

OPEN CLAMSHELL

Internal screen

(Main screen)

High quality

colour graphic display

Infrared port

Access to menu

(works with OK key)

Function indication

for right softkey

On/Off, End key

Long press to turn the

phone on or off.

Short press to end a

call/reject a call and

return to the standby

display

Earpiece

Function indication

for left softkey

Side key

Short press: reject/

end a call

Long press: start

camera preview

Left softkey

Quick access to

Mail from the standby

screen (short press)

and to SMS (long

press)

Call/Send key

To dial displayed num-

ber or name and an-

swer calls.

Voice recognition (long

press)

Alphanumeric

keys

To enter numbers and

text

Power connector

Right softkey

Quick access to the

i-mode from the stand-

by screen (short press)

and to

Games & Applications

(long press)

NAVIGATION KEY & QUICK ACCESS TO:

Alert mode setting (short press)

My card sending (long press)

Phonebook (short press)

Speech note recording (long press)

Calls log (short press)

Speech notes playing (long press)

OK key & Quick

access to main

menu from the

standby screen

Quick access to the Fun & Media box

Your M341i

PRELIMINARY OPERATIONS

INSERTING THE SIM CARD

FITTING THE BATTERY COVER

FITTING AND REMOVING THE BATTERY

CHARGING THE BATTERY

Getting started

GETTING STARTED

PREPARING THE PHONE FOR OPERATION

Please refer to preliminary operations, page 6.

BASIC OPERATIONS

TURNING THE PHONE ON

If an image is set as a Welcome screen and/or a melody has been set as a Welcome melody,

the mobile first requests the pin code then shows the selected image/animation and plays the

selected melody before showing the standby display (please see setting an image as a main

screen, a welcome screen or a goodbye screen from the pictures folder, page 44 and melodies,

page 45).

MAKING A CALL

The phone can make and receive calls only when it is switched on, when a valid SIM card is

inserted and when it is connected to a GSM or DCS network service.

If the keypad is locked you can receive calls but you cannot make any (see keypad lock, page 8).

To make a call:

Whilst in conversation an Options list (AutoDTMF, Hold, Speaker On or Speaker Off, Mute

or Unmute, End call and Record) and Sp.on (Speaker On)/Sp.off (Speaker Off, after the

speaker has been set to On) are available from the left and right softkeys.

ANSWERING A CALL

When receiving a phone call ( is displayed):

REJECTING A CALL

When receiving a phone call:

1 Open the clamshell.

2 Press and hold the On/Off key. A beep sounds at mobile activation. When switching the

mobile on for the first time or if the phone has been incorrectly switched off may be dis-

played.

3 If your SIM card is PIN protected, Enter PIN is displayed.

Enter the PIN code and select OK.

4 If prompted, enter the date & time settings or select Exit if the settings are correct.

1. Please refer to security codes, page 15 and to security features, page 70 for more details on your PIN and

lock codes.

2. When the phone is on and the clamshell is open the external screen is off; when the clamshell is closed the

external screen lights up except at mobile activation (both screens are on until the mobile has found the net-

work).

1 Dial the phone number or select one from your phonebook (press the left arrow key from the

standby display and select one of the available names).

2 Press the Call/Send key ( is displayed).

In compliance with European regulations, you are obliged to inform your correspondent before

recording a phone conversation.

1 Press the Call/Send key.

You can also answer a call by opening the clamshell. Please see active flip, page 65.

1 Press the Side key, press the On/Off key or Close the clamshell to reject the call (the call is

then forwarded to your mailbox).

Getting started

ENDING A CALL:

CLOSING THE CLAMSHELL

When closing the clamshell, the main screen is automatically switched off and the external

screen is automaticaly switched on. When the clamshell is closed and the mobile receives a

call, an incoming call animation and the caller’s identity (network dependent feature) are dis-

played on the external screen.

HOLDING YOUR PHONE (WHILE MAKING OR RECEIVING A CALL)

THE STANDBY DISPLAY

When switched on, the mobile searches for connection with the network. Once the

connection has been established, a beep sounds and the network and/or service

provider name or logo are displayed together with the time and date, the signal

strength and the battery charge level. If the mobile cannot find a valid network, the

signal strength and the operator name are not displayed.

The four arrows indicate that features can be accesed via the four arrows on the

cursor key.

The oval symbol in the middle of the cursor key indicates that the Menu can be

accessed by pressing the OK key (in the middle of the cursor key).

Mail and i-mode indicate that you can directly access the mailer and the i-mode service by

pressing the softkeys.

indicates that your mobile is attached to a GPRS network.

KEYPAD LOCK

When activated, the keypad lock feature prevents accidental action occurrings (e.g. camera ac-

tivation) whilst the phone is being carried in a pocket or a bag for instance. Incoming calls can

however be received and answered. Once the call is over, the keypad lock is automatically re-

activated.

To activate the keypad lock from the standby display:

To activate the keypad lock from the main menu:

To deactivate the keypad lock:

1 Press the On/Off key or the side key.

You can also end a call by closing the clamshell. Please see active flip, page 65.

When using the hands free mode, do not put the phone to your ear.

1 Press and hold . Keypad locked is displayed.

1 Press OK. Select Settings.

2 Select Keypad, then select Keypad lock.

1 Select Unlock and press or press and hold . Keypad unlocked is displayed.

How to hold

the phone.

Avoid

covering the up-

per back half of

the phone so as to

allow maximum

emssion and

reception quality.

Getting started

TURNING THE PHONE OFF

A tone sounds to confirm your action. A Goodbye screen is displayed whilst the mobile switches

off (you can set a Goodbye melody and/or picture to be played/displayed at mobile switch off

(please see setting an image as a main screen, a welcome screen or a goodbye screen from

the pictures folder, page 44 and melodies, page 45).

POWER SAVER

To allow you to enjoy optimised use of your mobile a power saver screen is automatically dis-

played, on the external or on the main screen depending on clamshell state, when the phone

has not been used for more than one minute. It displays your service provider name and the

time.

The power saver does not prevent operation. You can therefore receive a call, an SMS, etc.

whilst the power saver is on. The symbol is displayed on power saver mode instead of the

time when an event (new message, unanswered call information,...) has occurred on your mo-

bile. This symbol is displayed until you have read all the new events.

Pressing any key allows you to return to an active screen.

1 Press and hold the On/Off key.

Do not take the battery out of the mobile without first turning the phone off. Data might be lost. Should this

happen a first-aid kit symbol is displayed the next time the mobile is activated.

When a PC cable is connected to the mobile and you are using file transfer software, the power saving mode

is not active.

To enjoy optimised use of your mobile standby and talk time, please do not forget to disconnect the PC cable

after use.

10-

Using this guide

USING THIS GUIDE

lease carefully read this user guide. It contains information about your phone and the way

that it operates on the network. Some of the features described in this user guide are net-

work dependent. Do not forget to check with your service provider which of these you can use.

You may need to take out additional subscriptions to activate certain features.

KEY ACTIONS

To help you become quickly familiar with your mobile, here is how to use the keypad.

ICONS MENU

USER GUIDE NOTATION

Here is how to follow the instructions contained in this user guide and use your mobile.

USING THE DYNAMIC SCROLL PANELS

When scrolling the menu, the following scroll panel type allows you to have a

clear view of the information to be entered.

OK key in the middle of the cursor key (to validate OK on the display and access the

animated Icons menu: see pictures below).

Left softkey (to validate the item above: usually an action).

Right softkey (to validate the action above: usually Exit).

Right arrow on cursor key.

Left arrow on cursor key.

Up arrow on cursor key.

Down arrow on cursor key.

Send and Call key.

End, On and Off key.

The availability of the Calendar or Network services menu depends on your

SIM card.

Press OK Press the key to select OK (middle of the display).

Press OK. select

Settings.From the standby display press the key to access the main menu,

scroll up, down, left or right to the Settings menu item and press OK

to access the sub-menu.

Select Read (item

above right or left

softkey)

Press the key underneath Read.

Select Melodies Use the cursor key to scroll up, down, left or right to the required

menu item and validate by pressing OK.

E.g. ’Select Melodies’: scroll to Melodies menu item and press the

OK key to validate your selection.

Select ’Cancel’

or ’Exit’A short press allows you to return to the previous screen and a long

press to return to the stand-by state (except whilst in the i-mode

menu).

View... The ... indicate that more options or sub-menus are available

when pressing OK.

Unless otherwise specified, all the settings and features described in this user guide should be adjusted with

the clamshell is open.

11-

Using this guide

UNDERSTANDING THE GRAPHIC DISPLAY INDICATORS (ICONS)

Up to eight character lines plus one icons line can be displayed on your mobile screen.

The icons indicate the phone state and operational conditions when in use.

The following icons may be displayed:

1 The list of elements to be entered is displayed. Scroll down to the field(s) you want to fill in

and press OK.

2 Enter the requested information or select the requested item and select OK to validate.

3 Fill in as many fields as necessary and select Save to store all the information entered.

The arrow keys displayed at the bottom of the screen show the scrolling possibilities.

SIM memory in use

Phone memory in use: refers to information from the phonebook cards.

GPRS service icon. This indicates that data packet services are available.

GPRS connection icon. This is displayed when a GPRS connection is in progress.

Roaming. This is displayed when the phone is connected to a network other than

its home network.

Call diverting. This indicates that all incoming calls are being diverted. Call

diverting is network dependent.

Alarm clock.

Vibrator alert.

Keypad lock.

Line 2. This indicates that the second line is in use (subscription dependent).

Silent mode on.

Mute.

Infrared port. This indicates that the infrared port is active. i.e. that data can be

received via the infrared port.

Short message service (SMS). This is displayed when one or more short

messages have been received and not yet read. flashes when the SMS

message box is full and no new message can be stored. SMS availability is network

dependent.

Voice Mail. This is displayed when a Voice Mail message has been received and

stored by the networks Voice Mail centre. Voice Mail availability is network dependent.

Outgoing Call.

Incoming Call.

Withheld number. This is displayed when the caller does not wish his identity to be

shown.

Unanswered call. This is displayed when an incoming has not been answered.

Battery level indicator. This is permanently displayed to show the current battery

charge level. Five levels are shown: from full (5 bars) to low (one bar). If

the icon is empty, the mobile needs recharging.

Signal strength level. There are five strength levels. These show the strength of

the received signal. The more bars, the stronger the signal. If the network cannot be

found, no strength level is displayed.

Tegic edition mode.

Multitap edition mode.

New event. This is displayed on power saver mode to indicate that a new event

has occurred.

Arrow keys. These icons are displayed during menu operation to indicate that more

items in the menu can be access by pressing or .

Secured connection. This icon is displayed when a secured connection is in progress.

Games & Applications software in use.

Mail or MMS on mobile

Mail or MMS box on mobile full

Mail on server

MMS on server

Mailbox on server full

MMS box on server full

12-

Introduction

INTRODUCTION

hank you for purchasing the M341i (GSM, DCS) mobile telephone. The mobile telephone

described in this guide is approved for use on all GSM 900/1800 networks. Some of the

messages displayed on your mobile may be different according to your subscription type and/

or service provider.

As with all types of radio transceivers, this mobile telephone emits electromagnetic waves

and complies with international regulations when it is used under normal conditions and in

accordance with the safety and warning messages given below.

SAR

THIS M341i PHONE MEETS THE EU REQUIREMENTS FOR EXPOSURE TO RADIO

WAVES.

Before a mobile phone is available for sale to the public, compliance with the European

R&TTE directive (1999/5/CE) must be demonstrated. This directive includes as one essential

requirement the protection of the health and safety of the user and any other person.

Your mobile phone is a radio transmitter and receiver. It is designed and manufactured to en-

sure that it does not exceed the limits for exposure to radiofrequency (RF) energy recom-

mended by The Council of the European Union1. These limits are part of comprehensive

guidelines and establish permitted levels of RF energy for the general population. The guide-

lines have been developed by independent scientific organisations through regular and thor-

ough evaluation of scientific studies. The limits include a substantial safety margin designed

to assure the safety of all persons, regardless of age and health.

The exposure standard for mobile phones (CENELEC standard EN 50360: 2000) employs a

unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit2 recom-

mended by The Council of the European Union is 2.0 W/kg. Tests for SAR have been con-

ducted using standard operating positions (with reference to CENELEC standard EN 50361:

2000) with the phone transmitting at its highest certified power level in all tested frequency

bands3. Although the SAR is determined at the highest certified power level, the actual SAR

level of the phone whilst operating may be well below the maximum value. This is because

the phone is designed to operate at multiple power levels so as to use only the power required

to access the network. In general, the closer you are to a base station antenna, the lower the

power output.

The highest SAR value for this M341i model when tested for compliance against the stand-

ard was 0,356W/kg. Whilst there may be differences between the SAR levels of various

phones and at various positions, they all meet the EU requirements for RF exposure.

Additional information from the World Health Organization (WHO)

Individuals: Current scientific information does not indicate the need for any special precau-

tions in the use of mobile phones. If individuals are concerned, they might choose to limit their

own or their children’s’ RF exposure by limiting the length of calls, or using "hands-free" de-

vices to keep mobile phones away from the head and body.

RF absorbing devices: Scientific evidence does not indicate any need for RF-absorbing

covers or other "absorbing devices" on mobile phones. They cannot be justified on health

grounds and the effectiveness of many such devices in reducing RF exposure is unproven.

Source: WHO Fact Sheet 193, June 2000.

WHO: www.who.int/peh-emf.

1. European recommendation 1999/519/CE

2. The SAR limit for mobile phones used by the public is 2.0 watts/kilogram (W/kg) averaged over

ten grams of tissue. The limit incorporates a substantial margin of safety to give additional pro-

tection to the public and to account for any variations in measurements.

3. The maximum level of GSM emitted power is 250mW at 900 MHz and 125 mW at 1800MHz

according to the GSM standard.

13-

Introduction

There are a number of independent sources of information available to users including:

Royal Society of Canada: www.rsc.ca

The International Commission on Non-Ionizing Radiation Protection (ICNIRP): www.icnirp.de

The US Food and Drug Administration: www.fda.gov/cellphones/

The World Health Organization: www.who.int/emf

Melco Mobile Communications Europe S.A. belongs to the MMF, an international association

of radio equipment manufacturers.

The MMF produces information such as this in accordance with its purpose of developing and

presenting industry positions to independent research organisations, government and other

research bodies. Mobile Manufacturers Forum

Diamant Building, 80 Blvd. A. Reyers

B-1030 Brussels Belgium

www.mmfai.org

DECLARATION OF CONFORMITY

Melco Mobile Communications Europe S.A. hereby declares that this MT-171 (M341i) is in com-

pliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

A copy of the full Declaration of Conformity may be found on our website :

http://www.mitsubishi-telecom.com

GENERAL SAFETY

Due to the possibility of radio frequency interference, it is important to follow special regula-

tions regarding the use of radio equipment.

Please follow the safety advice given below.

VEHICLE SAFETY

Respect national regulations on the use of mobile telephones in vehicles.

Road safety always comes first! Always give your full attention to driving.

- Do not use a hand-held phone while driving. If you do not have a 'hands free' car kit, stop

and park your vehicle safely before using your phone. Please ensure that you are fully aware

of the laws in your country regarding the use of hand-held mobile devices whilst driving.

- If incorrectly installed in a vehicle the operation of mobile telephones can interfere with the

correct operation of the vehicle electronics, such as ABS anti-lock brakes or air bags. To

avoid such problems ensure that only qualified personnel carry out the installation.

- Do not place the phone on the passenger seat or where it could fall during sudden braking

or a collision. Always use the holder.

Switch off your phone and remove the battery when in an aircraft. The use of mobile

telephones in an aircraft may endanger the operation of the aircraft, disrupt the mobile

phone network and is illegal.

Switch off your phone when at any refuelling point or near inflammable material.

Switch off your phone in hospitals and any other place where medical equipment may

be in use.

Respect restrictions on the use of radio equipment in fuel depots, chemical plants or

where blasting operations are in progress.

There may be a hazard associated with the operation of phones close to inadequately

protected personal medical devices such as hearing aids and pacemakers. Consult

your doctor or the manufacturers of the medical device in question to determine

whether it is adequately protected.

Operation of your phone close to other electronic equipment may also cause

interference if the equipment is inadequately protected. Observe any warning signs

and manufacturers recommendations.

14-

Introduction

EMERGENCY CALLS

You can make emergency calls by dialling the European standard emergency number 112

even if there is no SIM card in your phone. Emergency calls can even be made if the phone

is PIN or electronically locked or call barred. In some countries local emergency numbers can

still be used for emergency purposes but the phone may have to contain a valid SIM card.

When making an emergency call remember to give all the necessary information as accurately

as possible. As phone may be the only means of communication at the scene of an emergency,

do not cut off the call until told to do so.

CARE AND MAINTENANCE

This mobile telephone is the product of advanced engineering, design and craftsmanship and

should be treated with care. The suggestions below will help you to enjoy this product for

many years.

- Do not expose your phone to any extreme environment where the temperature or humidity

is high.

- Do not expose or store your mobile in cold temperatures. When the phone warms up after

switch on, to its normal temperature, moisture may form inside and damage the electrical

parts.

- Do not attempt to disassemble the phone. There are no user serviceable parts inside.

- Do not expose your phone to water, rain or spilt beverages. It is not waterproof.

- Do not drop, knock or violently shake your phone. Rough handling may damage it.

- Do not clean your phone with strong chemicals or solvents. Wipe it only with a soft, slightly

dampened cloth.

- Do not place the telephone alongside computer discs, credit or travel cards or other mag-

netic media. The information contained on discs or cards may be affected by the phone.

- Do not connect incompatible products. The use of third party equipment or accessories, not

made or authorised by Mitsubishi Electric, invalidates the warranty of your phone and may

be a safety risk.

- Do not remove the labels. The numbers on it are important for aftersales service and other

related purposes.

- Do contact an authorised service centre in case of problem.

AC/DC ADAPTOR CHARGER

This mobile phone was designed to be used only with the supplied AC/DC charger. Use of

any other charger or adaptor invalidates any approval given to this apparatus and may be

dangerous.

BATTERY USE

Batteries may be charged hundreds of times but gradually wear out. When the operating time

(stand-by and talk time) is noticeably shorter than normal, it is time to buy a new battery.

- Do not leave batteries connected to a charger longer than necessary. Overcharging short-

ens battery life.

- Disconnect battery chargers from the power source when not in use.

- Do not expose batteries to high temperatures or humidity.

- Do not dispose of the batteries in fire. They may explode.

- Avoid putting the batteries into contact with metal objects which can short circuit the battery

terminals (e.g. keys, paper clips, coins, etc.).

- Do not drop or subject the batteries to strong physical shocks.

- Do not try to disassemble any of the battery packs.

- Use only the recommended battery chargers (see above).

- If the battery terminals become soiled, clean them with a soft cloth.

- Batteries may warm up during charging.

Mobile phones rely on wireless and landline networks which cannot be guaranteed in all conditions. You

should therefore never rely solely on wireless phones for essential emergency communications.

15-

Introduction

BATTERY DISPOSAL

PC CABLE

The PC cable allows you to connect the GSM mobile telephone to a Personal Computer in

order to exchange data.

YOUR RESPONSIBILITY

This GSM mobile telephone is your responsibility. Please handle it with care and in respect

of local regulations. Please keep it in a safe place at all times and out of reach of children.

Become familiar with and use the security features to block unauthorised use. If your phone

and/or SIM card are lost or stolen, call your service provider immediately to prevent illegal

use.

When not in use, turn off the phone and remove the battery.

SECURITY CODES

The phone and SIM card are delivered to you pre-programmed with codes that protect the

phone and SIM card against unauthorised use. A short description of each follows. See “se-

curity features”, page70 to change your PIN and phonelock codes.

PIN AND PIN2 CODES (4-8 DIGITS)

All SIM cards have a PIN (Personal Identity Number) that protects the card against unauthor-

ised use.

Entering the wrong PIN code three times disables the SIM card and the message SIM

Blocked is then displayed. Enter PUK: appears.

PUK AND PUK2 CODES (8 DIGITS).

Please ask your service provider for your PUK code. Use it to unblock a disabled SIM card

(see page “security features”, page70).

The PUK2 code is required to unblock the PIN2 code (see above).

CALL BARRING PASSWORD (4 DIGITS)

This password is used to bar various types of calls, made or received, from the phone (see

“call barring password”, page69).

PHONELOCK CODE (4 DIGITS)

This code is set to 0000 on delivery. You can change it. Once changed it cannot be identified

by the manufacturer over the phone. Please refer to “phone lock code”, page70 for more de-

tails.

I-MODE LOCK

The default i-mode lock code is 0000.

It allows you to forbid any unauthorised use of the i-mode feature (see i-mode lock page50).

We advise you remember these codes and make yourself familiar with their purpose and op-

eration.

DISPOSING OF WASTE PACKAGING

The packaging used for this phone is made of recyclable materials and as such should be

disposed of in accordance with your national legislation on the protection of the environment.

Please take care to separate the cardboard and plastic elements and to dispose of them in

the correct manner.

In compliance with European environmental protection directives, used batteries must be

returned to the place of sale, where they are collected free of charge.

Don't dispose of your batteries within household waste.

16-

Tools

TOOLS

hen scrolling to the Tools menu from the main icons menu, direct access to

the Infrared port section is possible by selecting Infrared on the left side of

the display.

The Tools menu allows access to a diary, a calculator, a currency converter,

an alarm clock and the infrared port opening.

DIARY

The Diary is divided into three parts:

-The Calendar (to manage events),

-The Tasks list (to manage tasks),

-The Storage used (to provide the diary memory information).

An event is a diary entry that has a direct implication on your timetable (e.g. a meeting).

A task is a diary entry that has no direct implication on your timetable (e.g. organising a journey).

CALENDAR

The calendar allows you to store up to 100 events scheduled to occur either once, daily, weekly,

monthly or yearly. Each entry can contain up to 50 characters plus a reminder alarm. Events

may be viewed on a daily, a weekly or a monthly basis, and may be sent via the Infrared port

or by SMS.

TO ENTER AN EVENT:

An empty new event card is displayed with the following fields:

-Title (up to 10 characters)

-Description (up to 50 characters)

-Starting date & time

-Ending date & time

-Alarm

-Location

-Repetition

TO VIEW THE CURRENT DAY’S ENTRIES:

In the Today view each event is displayed on one line as follows :

-A graphic representation ( ) if an alarm has been set,

-The event starting time,

-The first part of the event title,

Red events indicated that two or more events clash.

1 Press OK. Select Tools.

2 Select Diary.

3 Select Calendar. A Monthly or Daily view is displayed (the Daily view is displayed if an event

is related to the current day).

4 Select Options.

5 Select New event.

6 Enter or select the requested data. Confirm each entry by pressing OK .

7 Select Save to confirm data storage.

1 Press OK. Select Tools.

2 Select Diary.

3 Select Calendar.

4 Select Options.

5 Select View... and then Today to view the current day’s entries or select

Day view to view the selected day’s entries.

17-

Tools

The following actions are available:

An Options list is available. It allows you to change the current View..., Create a new event or

Modify an event, Send it by... infrared port and SMS, Export... it, Delete one event or De-

lete all events.

TO VIEW WEEKLY ENTRIES,

The week’s events are display in chronological order. Each event is represented as a bar (its

length depends on its duration. Red indicates clashes. Purple indicates that the alarm has been

activated).

The following actions are available:

An Options list is available. It allows you to change the current View..., Create an event, Ex-

port... the Events in a defined period/All events or Delete all events.

TO VIEW MONTHLY ENTRIES:

The whole month is displayed.

If the selected month is the current one, the date is ringed in a different colour. Colours are used

to indicated the days (and alarm activation) of the stored events.The following actions are avail-

able:

An Options list is available. It allows you to change the current View..., Create an event, Ex-

port... the Events in a defined period/All events or Delete all events.

ACTIONS PURPOSE

To move down to the next event or loop back to the first one

To move up to the previous event or loop to the last one

To move to the previous day

To move to the next day

1 Press OK. Select Tools.

2 Select Diary.

3 Select Calendar.

4 Select Options.

5 Select View... and then Week view.

ACTIONS PURPOSE

To move down to the next time interval

To move up to the next time interval

(short press) To move to the previous day

(long press) To scroll to the previous week

(short press) To move to the following day

(long press) To scroll to the following week

1 Press OK. Select Tools.

2 Select Diary.

3 Select Calendar.

4 Select Options.

5 Select View... and Month view.

ACTIONS PURPOSE

To move down within the current display

To move up within the current display

(short press) To move to the previous day

(long press) To scroll to the previous month

(short press) To move to the following day

(long press) To scroll to the following month

18-

Tools

TASKS LIST

This feature allows you to store up to 100 tasks to be done (To do), scheduled with a start and

a due date, with or without a reminder alarm.

TO ENTER A NEW TASK:

An empty task card is displayed with the following fields:

- A title (up to 10 characters)

- A description (up to 50 characters)

- A starting date

- A due date

- An audio alarm which can be activated at your specified time

TO DISPLAY A TASKS LIST:

The tasks are displayed in a list, ordered by date. If an alarm is activated for a task is displayed.

An Options list is available. It allows you to create a New task, Modify the current task, Send

a task by... Infrared port or by SMS, to Export... Tasks in period or All tasks, to Delete the

current task or to Delete all tasks period.

EXPORTING AN EVENT

The Export... option allows you to create a file so as to exchange events with another device

such as a PC or another mobile. The created file can contain all the events stored in the calen-

dar (select All events) or in a time interval (Select Events in period).

ALARM NOTIFICATION

The alarm notification screen is displayed at the specified time according to the event or task

to which it relates.

If it is not acknowledged, the alarm stops ringing after 60 seconds. It automatically restarts after a

snooze time until it is stopped or up to the beginning/ending time and date of the event/task.

1 Press OK. Select Tools.

2 Select Diary.

3 Select Tasks list.

4 Select New task and enter the required information.

5 Enter or select the requested data. Confirm each entry by pressing OK .

6 Select Save to confirm data storage.

1 Press OK. Select Tools.

2 Select Diary.

3 Select Tasks list .

4 Select Current tasks or Elapsed tasks.

1 Press Options (from the Day, Week or Month view). Scroll down and select Export...

2 Select All events or select Events in period then define the time period (Between / And)

and select Export.

3 The exported file is stored in the Others folder of the Fun & Media box menu. You can then

send it to another device (please see others, page 47).

The exported calendar item is stored as a .vcs file.

1 Press Valid to acknowledge the alarm or press Snooze to repeat the alarm after the snooze

period.

1. When the clamshell is closed, press on the Side key to activate the Snooze feature.

2. Snooze is only available on an event alarm.

19-

Tools

STORAGE USED

This feature displays the number of Diary registered events and tasks. The following actions

are available in the Options menu:

CALCULATOR

This feature allows you to make simple calculations using + (plus), - (minus), *(multiplication),

/ (division) and % (percentage) functions.

If the currency converter is activated, numbers can be converted during calculations.

To use the calculator,

Press keys to to enter numbers. Press the multitap (for further details on the multitap

text entry method please see entering text, page 24) to get +, -, * and / symbols. Use the

multitap to enter decimal points or %.

Press Clear during a calculation to correct an entry. Press = to get the operation result.

In the above example, pressing = again calculates 1728 x 12 = 20736

Pressing Clear deletes the result.

An integrated currency converter facility is also available. See Currency converter below.

CURRENCY CONVERTER

This feature allows currency converting. The currencies and exchange rates must be entered

prior to use. The conversion is calculated on the per unit exchange rate of the second selected

currency.

ACTIONS PURPOSE

Delete events To delete the events of the defined time period.

Delete tasks To delete the tasks of the defined time period.

Delete all events To delete all the events stored in Calendar.

Delete all tasks To delete the tasks stored in the Diary.

1 Press OK. Select Tools.

2 Select Calculator .

The phone is ready to perform simple calculations.

Example 144 x 12 = 1728

key sequence display

144

Press 3x *

= 1728

The % function can only be used (entered) as the last operation during a calculation.

e.g.250 - 10% = 225

Example using the currency converter £ - €:

€ 154 + € 3 = £ 97.1374

key sequence display

Select Curr.

95.2813

1.8561

= 97.1374

1. This example was made on the basis of the following exchange rate: € 1 = £0.61871

2. The Currency converter feature can be accesed from the Calculator and from the Currency converter sub-

menus.

20-

Tools

To select the currencies and the exchange rate:

To calculate the conversion between the selected currencies:

ALARM CLOCK

This feature allows you to set a daily Reminder Alarm.

To set a time and turn the alarm on:

If the phone is off at alarm time, it automatically switches on.

To use the alarm as a Reminder or a Snooze Alarm:

If the phone is locked or if the PIN setting is on, the phone returns to this locked state after the

alarm has rung until you use it.

If the alarm is acknowledged but not validated after the 3rd (and final) alarm, the alarm indica-

tors remain on the display for up to 15 minutes (the mobile then either goes back to its 'on' or

'off' previous state).

To turn the alarm off:

INFRARED PORT

The infrared port allows you to exchange data between the mobile and other devices (provided

they have an infrared port).

You can for instance download or send files such as images for your main screen (see pictures,

page 43 ), send or receive name cards,...

To initiate a transfer via the infrared port, your mobile must be facing another infrared port.

Both ports can then be opened and synchronised. The requested transfer can be performed.

Objects (e.g name cards) are transferred one by one.

OPENING THE INFRARED PORT

Opening the infrared port allows you to receive information via this port.

1 Press OK. Select Tools.

2 Select Currency converter.

3 Select Settings.

4 Enter the first currency name (e.g. Euro). Press OK.

Enter the second currency name (e.g. Dollar). Press OK.

Enter the exchange rate using to enter a decimal point.

5 Press OK to validate the entry. Press Save to confirm data storage.

1 Press OK. Select Tools.

2 Select Currency converter.

3 Select one of the first two options.

4 Enter the amount to be converted. Press to insert a decimal point if needed.

5 Press OK. The converted amount and the exchange rate information are displayed.

1 Press OK. Select Tools.

2 Select Alarm clock.

3 Select On and enter the alarm time or press OK to validate the displayed time.

is displayed when reverting to the standby display.

When 'on', the alarm operates at the same time every day until turned off.

Press No ring, or any other key (except Valid. and OK) to snooze the alarm. The alarm icons

remain on the display and the alarm starts ringing again 3minutes later.

Or press Valid or OK to acknowledge the alarm and stop the alarm clock process.

If a call is in progress at alarm time a 'Call in progress' alert beep sounds and a visual alert is displayed every

3 minutes. Validate or acknowledge the alarm in the usual way.

1 Press OK. Select Tools.

2 Select Alarm clock .

3 Select Off.

21-

Tools

Once opened, the infrared port can be used for any kind of transfer (data, fax, file transfer,...).

The infrared port is automatically closed after a while.

To open the infrared port,

CLOSING THE INFRARED PORT

Closing the infrared port closes all infrared sessions.

To close the infrared port:

TRANSFERRING A NAME CARD VIA THE INFRARED PORT

You can transfer a name card via the infrared port:

USING YOUR MOBILE AS A MODEM

You can use your mobile as a modem for other devices (PC, PDA,...) via the infrared port (on

both devices) or via a PC cable. In order to activate a connection, a standard modem driver

must already be installed in the other appliance:

Your mobile:

or:

Once both devices are ready, the Internet connection can be activated (without any action be-

ing performed on your mobile).

1 Press OK. Select Tools.

2 Select Infrared port.

3 Select Open. A confirmation message then are displayed to confirm that the port is open.

1 Press OK. Select Tools.

2 Select Infrared port.

3 Select Close.

The infrared port automatically closes if it remains unused for a while.

1 Place your mobile directly opposite the infrared port of the other device.

2 Open the infrared port of the other device.

3 Select the card you wish to transfer as explained in the section viewing and calling phone-

book numbers, page 35.

4 Select Options. Select Send by... Infrared port.

The infrared port open and the transfer is performed.

1 Install the PC cable or open the Infrared port on your PC or PDA.

2 Install the modem driver.

3 Configure the PC according to the instructions given with the modem driver.

Please enter the following parameters:

- Flow control: Hardware

- Data Bits: 8

- Parity: No parity

- Stop Bit: 1 stop Bit

- Speed: 115200b/s

The PC cable may not be supplied with your mobile. Please ask your retailer for an M341i compatible PC cable.

1 Plug in the PC cable (please see Tableau, page4).

1 Open your mobile Infrared port.

If your mobile is set to Modem mode, (Please see operation mode, page 69) all incoming calls are rejected.

If your mobile is not set to Modem mode, your Internet connection may be interrupted by incoming calls.

22-

Messages

MESSAGES

his section describes the contents of the Messages menu and contains full

information on the Short Message Service. Other types of messages can be

sent and received via your mobile. Please refer to the i-mode section (page50)

for full information on E-mail and MMS.

The Short Message Service (SMS) allows to send or receive text messages to

or from other mobile phones. You can store, edit and forward messages as well

as save any of the numbers they may contain.

These SMS are stored on the phone memory; they may also be stored in the

SIM card if they are sent by a service provider.

You can access the Messages menu by pressing and holding the Mail softkey from the standby

display.

READING A RECEIVED SMS MESSAGE

When the phone receives an SMS message, a new SMS alert beep sounds and is displayed

on the internal or the external screen (depending on the position of the clamshell). The mes-

sage is automatically stored in the phone or in the SIM card. A flashing indicates that the

SIM or the phone memory are full and cannot store any further messages. Delete messages to

allow new messages to be delivered.

READING STORED SMS MESSAGES

Unread messages are indicated by the icon + bold text. Messages that have already been

read are indicated by .

MOVING MESSAGES TO SIM

It is possible to move a message from the Inbox or the Outbox to the SIM memory. However,

according to the message size, the message may be truncated (the 160 first characters only

are moved to the SIM memory). The sending date (for sent messages) and the 'Copy to' ad-

dressees are lost when moving the message to the SIM memory.

To move a message to the SIM memory:

1 Press Read to read new messages (from the standby display only).

2 Press Options to View, Reply, Reply (+text), Delete, Delete all, Forward, Send as mail,

Move to SIM or Numbers (to store or call the number(s) contained in the SMS header or

text).

1 Press OK. Select Messages.Or press and hold the Mail softkey.

2 Select Inbox or SIM archive then select Received messages to display the message list.

Use the arrow key to scroll up and down and access the message you want to read.

3 Select OK or Options/View to read the message text.

1 Press OK. Select Messages.

2 Select Inbox or Outbox.

3 Choose the message to be moved and select Options .

4 Select Move to SIM.

23-

Messages

FORWARDING MESSAGES

You can forward a received message to other people/number(s):

ACTIVATING OR DEACTIVATING THE MESSAGE ALERT TONE

Each time a message is received, a new SMS alert tone sounds. To activate or deactivate this tone:

PREPARING THE PHONE TO SEND SMS MESSAGES

Before sending your first SMS or if you want to register a new profile, the network SMS centre

number (obtainable from your service provider) must be stored:

The SMS centre number may already be available in your SIM card and may be automatically

displayed. If you want to select a Sending profile for your message:

1 Press OK. Select Messages.

2 Select Inbox or SIM archive/Received messages.

3 Select the message to be forwarded and select Options.

4 Select Forward.

5 Press OK. Select the To field and select one of the displayed names or select More... if you

want to send your message to another mobile number (directly enter the number). Press OK

to validate.

6 In the Text field enter the message text (see “entering text”, page24) or select one of the

models (Models) and press OK.

7 If you want to send the message to several addressees, enter one or several phone num-

bers/names in the Copy to list (up to 4 more addressees) and press OK then Valid to

return to the previous screen.

8 Select Options.

9 Select Send, Store & send or Store.

10 A warning information displays the number of SMS needed to send the message if it is more

than one. Select Go on if you want to send the message or select Cancel if you do not want

to send it or if you want to amend your message.

1 Press OK. Select Messages.

2 Select Settings.

3 Select Reception Alert. Select On or Off.

FIELDSDESCRIPTION DEFAULT

Name To enter the profile name. Profile1

Message

centre

To enter the centre number. Empty

Format To set the message format: text, voice, fax or paging. Text

Validity

period

Time the message remains at the message centre

until delivered. Maximum

1 Press OK. Select Messages.

2 Select Settings.

3 Select Sending profile.

4 Enter the message centre number or select a template (if several available) then enter the

following fields (operator dependent).

You may not be allowed to change your sending profile (format and validity period). Please contact your ser-

vice provider for further details.

5 Select Save to validate.

1 Press OK. Select Messages.

2 Select Settings.

3 Select Sending profile and select the profile you want to use. Select Options.

4 Select Select.

24-

Messages

ENTERING TEXT

Some features and functions (storing names in the phonebook or typing SMS text messages,

Tools, Settings,...) require you to know how to enter and edit text in the display.

Three modes are available. They are indicated by in lower case mode, by in upper case

mode and by in numeric mode. Text, figures and alphabet characters can then be entered

or edited directly from the keypad. Press to switch from one mode to another.

There are two methods of entering text characters: the Multitap or Multipress key method, and

the quicker intuitive method, called T9 text input.

Press the down arrow key to swap between the T9 and the Multitap methods. When on T9

mode, is displayed on the upper part of the display to indicate that T9 is the current mode.

is displayed on the lower part of the screen to indicate that the Multitap text method can

be accessed by pressing the down arrow key. When on Multitap mode, is displayed on the

upper part of the display to indicate that Multitap is the current mode. is displayed on the

lower part of the screen to indicate that the T9 method can be accessed by pressing the down

arrow key.

THE MULTITAP/MULTIPRESS METHOD

A brief press on a key displays the first character associated with the key and shows the other

available characters at the top of the display. Here is the list of the available characters (the

available characters list is language dependent):

To enter text, press the key bearing the required character until it appears in the display. Hold-

ing the key displays the number corresponding to the key. If you need to use two characters

from the same key, wait for a few seconds after entering the first character (until the key char-

acters on the upper part of the screen are cleared) or press the right arrow key before pressing

the key again.

Correct mistakes by a short press on Clear.

Holding the Clear key deletes all the text. Use the left or right arrow keys to move the cursor in

the text. Holding allows you access to 25 special characters:

To select and insert a character into the text:

KEY CHARACTER

Lower case Upper case

1 . , - ' @ : ?

a b c 2 A B C 2

d e f 3 D E F 3

g h i 4 G H I 4

j k l 5 JK L 5

m n o 6 M N O 6

p q r s 7 P Q R S 7

t u v 8 T U V 8

w x y z 9 W X Y Z 9

0 0

Short press : to switch mode (T9 or multitap) to lower case, upper case or

numeric mode.

Long press : to switch from lower case to upper case. Only the first letter entered

is upper case, the following ones are lower case (e.g.: to write a surname).

Short press: to enter a space.

Long press: to access special characters.

Short press: moves the cursor through the text one place to the left or to the right.

Long press: moves the cursor to the text beginning or end.

Swap between the Multitap/Multipress method and the T9 text input

1 Move the cursor to the required character.

2 Select OK.

The ↵ symbol is only displayed when on SMS and i-mode.

It allows you to go to the following line.

25-

Messages

MULTITAP METHOD:

THE T9 METHOD:

A press on the down arrow key allows you to swap between T9 text entry and the Multitap meth-

od.

Tips and Operation

Example To type Card:

Press OK and select Messages.

Select Write new.

Fill in the To field (see sending a new SMS message, page26).

In the Text field, press the until is displayed. Press briefly three

times, C is displayed.

Press until is displayed. Press once, a is displayed

Press three times, r is displayed

Press once, d is displayed. The word Card is now displayed.

1 Press the key bearing the required letter once only (the requested character may not be dis-

played first).

2 The active word changes as you enter text. Enter all the word characters up to the end of the

word.

3 If the right word is not displayed when all the characters have been entered, press until

you get the required word.

4 If the requested word does not correspond to the one displayed, press the down arrow key to

swap to the multitap method and enter the correct letters.

5 Use the left or right arrow keys to move the cursor around the text to insert or delete charac-

ters.

KEY ACTION

Short press : to switch mode (T9 or multitap) to lower case, upper case or

numeric mode.

Long press : to switch from lower case to upper case. Only the first letter entered

is upper case, the following ones are lower case (e.g.: to write a surname).

Clear Clear or backspace

Short press: to enter a space.

Long press: to access special characters.

Another matching word

Smart punctuation

Short press: moves the cursor to each word beginning or end .

Long press: moves the cursor to the text beginning or end .

Swap between the T9 and the Multitap method

Example To write card:

Press OK and select Messages.

Select Write new .

Fill in the To field (see sending a new SMS message, page26).

In the Text field, press the down arrow key until is displayed.

Press , a appears.

Press , cc appears.

Press , car appears.

Press , case appears.

If the displayed word is not the one you want, press as many times as

necessary to view card.

26-

Messages

CREATING TEXT MODELS

You can create a set of messages to be used as models. These texts can contain up to 50 char-

acters and allows you to add text when you want to use them. These templates are stored in

the mobile memory.

To create text models,

EDITING A TEXT MODEL

SENDING A NEW SMS MESSAGE

You can send message texts (up to 918 characters). The standard size for an SMS is 160 char-

acters (your service provider charges you according to the number of SMS used to send your

message). The icon (1 = number of SMS used - it is updated while writing your message

and shows the number of SMS needed to send your message) is displayed on the left corner

of the screen.

To send SMS from the Menu:

To send SMS from the standby display:

or:

1 Press OK. Select Messages.

2 Select Text models.

3 Choose any blank template ([...]) and press OK.

4 Enter the template text and press OK.

1 Press OK. Select Messages.

2 Select Text models.

3 Select the text model to be modified and press OK.

4 Edit the text and press OK.

1 Press OK. Select Messages.

2 Select Write new.

3 Press OK. Select the To field and choose one of the displayed names or select More... if

you want to send your message to another mobile number (directly enter the number). Press

OK to validate.

4 In the Text field, enter the message text (see “entering text”, page24) or select one of the

models (Models ) and press OK.

5 If you want to send the message to several addressees, enter one or several phone num-

bers/names in the Copy to list (up to 4 more addressees) and press OK then Valid to

return to the previous screen.

6 Select Options.

7 Select Send, Store & send or Store.

8 A warning information displays the number of SMS needed to send the message if it is more

than one. Select Go on if you want to send the message or select Cancel if you do not want

to send it or if you want to amend your message.

If you have registered an automatic signature, the number of characters used is automatically added to the

message length.

1 Press the left arrow key to access the phonebook. Select one of the available names or numbers.

2 Select Options.

3 Scroll down and select Send SMS to, then proceed as described above.

1 Press and hold the softkey underneath Mail.

2 Select Write new, then proceed as described above.

27-

Messages

SIGNATURE

You can register a signature to be automatically added to your text messages. The signature

is not displayed when typing the message text but it is displayed on message reception by the

addressee. The maximum size for the signature is 30 characters. If the message text to be sent

already 918 characters, the signature cannot be added.

To register a signature:

OUTBOX AND SIM ARCHIVE EMITTED MESSAGES

The Outbox and SIM archive emitted messages contain unsent draft messages and stored

sent messages (delivered or undelivered). These messages can be selected from the outbox

or SIM archive menu and can be modified and resent as new SMS messages.

To select one of these messages:

STATUS REQUEST

If a status is requested on a sent message, a status request is sent to the network (must be

network supported). If the status is requested on a delivered message the date and time of de-

livery may be shown.The network then answers by sending a status report (SR) back to the

phone. Press OK to acknowledge it.

To activate the status request:

To request a reply:

A reply to your message can be requested from your correspondent. If you activate this feature,

you will be charged for the cost of the reply message.

The availability of this feature is operator dependent.

To read the sent message, delete or re-send it when receiving the status:

1 Press OK. Select Messages.

2 Select Settings.

3 Select Signature.

4 Select Insert in message. Select Yes.

5 Select Text and enter your signature text.

6 Select Save to store your signature.

1 Press OK. Select Messages.

2 Select Outbox or SIM archive then Emitted messages and use the up or down arrow

keys to scroll to the required message. Messages are either 'transmitted' or 'to be sent' .

3 Press Options to View, Delete, Delete all, Status (for sent messages only) Send, Send as

mail, Modify, Move to SIM (for outbox messages only), Numbers (to store or call the num-

ber(s) contained in the SMS header or text) or Details.

1 Press OK. Select Messages.

2 Select Settings.

3 Select Message config.

4 Select Delivery report and select On.

5 Select Save.

1 Press OK. Select Messages.

2 Select Settings.

3 Select Message config.

4 Select Reply requested and select On.

5 Select Save.

1 Press Options. Send again, Clear, Associated message or Delete message is displayed.

2 Select the required action.

28-

Messages

STORAGE CONSUMPTION

The storage status for SMS messages can be consulted.

To view the number of messages stored, the total available space on the Phone memory and

on the SIM card:

BROADCAST - CELL BROADCAST (CB) MESSAGES

These messages are broadcast by the networks to GSM users and may provide general informa-

tion about local area dialling codes, weather reports, traffic, news, etc. Each type of message is

numbered, allowing you to select the type of information you wish to receive.

Up to 5 types of messages can be programmed into the selection list.

16 standard message types are pre-programmed into the phone for your selection. New mes-

sage types can be programmed into the selection list using the 3digit cell broadcast type

number. Contact your service provider for details about the type of messages they broadcast.

Before you activate the broadcast message service, you must enter at least one message type

in the selection list.

ENTERING A MESSAGE TYPE IN THE SELECTION LIST

ACTIVATING / DEACTIVATING THE BROADCAST SERVICE

READING BROADCAST MESSAGES

Broadcast messages are displayed whilst the phone is on standby. If a broadcast message is re-

ceived whilst in conversation or operating the menu, it only become visible once the mobile revert to

the standby display. A message can contain up to 93 characters and may be displayed on several

pages.

OPTIONS ON MESSAGE DISPLAY

Press Exit to clear the CB message displayed. Press the call key to dial the number contained

in the message.

Press Options to display the following menu:

1 Press OK. Select Messages.

2 Select Storage used. The SMS memory used is displayed. Scroll down to access the SIM

archive.

3 Select Details for more information on the Phone and SIM stored messages (use up and

down arrow keys to scroll to the required information).

1 Press OK. Select Messages.

2 Select Settings.

3 Select Broadcast.

4 Select Message types and select one of the empty types ([...]). Select OK.

5 Select Modify by list (or Modify by code if the type number is known).

6 Select the message type(s) you wish to receive and select Valid.

7 Select Save to store your setting.

1 Press OK. Select Messages.

2 Select Settings.

3 Select Broadcast.

4 Select Reception and select On or Off.

5 Select Save to store your setting.

OPTION ACTION

Delete To delete the current message

Delete All To delete all the received CB messages

Numbers To display all phone numbers contained in the message text and dial or store

them in the phonebook if required.

Broadcast

Off

To deactivate cell broadcast.

29-

Messages

ACTIVATING/DEACTIVATING THE ALERT TONE

An alert tone can be set to beep every time a new or updated broadcast message is received.

BROADCAST LANGUAGE

All the broadcast messages can be displayed in several languages.

To select a language:

1 Press OK. Select Messages.

2 Select Settings.

3 Select Broadcast.

4 Select Reception alert and select On or Off.

5 Select Save to store your setting.

1 Press OK. Select Messages.

2 Select Settings.

3 Select Broadcast.

4 Select Language and select one of the available languages.

5 Select Save to store your setting.

The availability of this feature is network dependent.

30-

Calls & Times

CALLS & TIMES

ccess the Calls & Times menu to check the details of individual incoming and

outgoing calls, the duration of the last call, the total call time for all sent and

received calls or to play the recorded calls.

CALLS LOG

This feature stores details (identity, time and date and call duration) about the last 10 numbers

dialled, the last 10 unanswered calls and the last 10 received calls. The calls log can be acti-

vated for Line 1 and Line 2 (Line 1 is your main line. Line 2 availability is subscription depend-

ent).

The last number dialled or received is displayed first. The caller’s name is displayed if it is reg-

istered in one of the phonebooks (if not the phone number is displayed). If your subscription

does not have Caller Line Identification (CLI) ’Unknown number’ is displayed. If the caller has

with held his number, ’Withheld number’ is displayed.

Press call key to call the selected number.

Press Options to access the following menu:

Use the up or down arrow keys to select the required option and follow the instructions displayed.

CALL TIMERS

The voice, Modem and GPRS call information for Line 1 and Line 2 is stored in the Call timers

menu.

The Details sub-menu stores time information on calls made and received via the home net-

work and whilst roaming (national and international networks).

1 Press OK. Select Calls & Times.

2 Select Calls log.

3 Select Last dial, Unanswered calls or Received calls.

4 Use the up or down arrow keys to scroll through the calls list.

ITEMACTION

Store To store the number in the phonebook.

Delete To delete the entry.

Delete all To delete all entries.

Edit To edit the displayed number.

Details To view the name, number, time and date and call duration (for answered

calls only) of the selected number.

Call To call the selected number.

Send SMS To send an SMS message to the selected phone number.

Press the call key from the standby display to access the last 10 numbers dialled.

If the call timers have been reset (see call timer - reset, page 31) the date of the latest counter reset is displayed

1 Press OK. Select Calls & Times.

2 Select Call timers.

3 Select Show.

4 Use the up or down arrow keys to view all the timer information.

31-

Calls & Times

The call type and the accumulated times of outgoing and incoming calls are dis-

played.

Selecting Details displays information on calls made on your home network, on

National roaming and on International roaming.

BALANCE INFORMATION (SUBSCRIPTION DEPENDENT)

This service may be supplied by your service provider. It allows you to view the remaining air-

time balance on your phone line.

Please contact your service provider for more information. If your subscription allows access to

this information:

When selecting Call, if the balance information number is already stored, a call is sent to the

balance information centre. If no number is stored, select Set number and enter it. Press OK

to store the number, then select Call to call the information centre number.

REMINDER - CALL DURATION

You can set a duration reminder to beep regularly to remind you of the time spent on your call.

The frequency can be any multiple of 1 minute (up to 59 minutes).

CALL TIMER - RESET

This feature allows you to reset the call timers. The 4 digit lock code is required to reset the call

timers (default lock code: '0000').

CALL COSTS - MANAGEMENT

Some service providers offer an Advice of Charge (AoC) subscription service allowing you to

view the cost of the last call cost, the total calls cost and the remaining balance on your account

(once a 'credit limit' has been set ).

To display these, you must first set a currency value and enter an average cost per unit (only

calls units are displayed if the cost information is not stored).

To set a currency value per unit:

If Line 2 is active too, 'All Calls' for Line 1 and Line 2 are displayed separately.

1 Press OK. Select Calls & Times.

2 Select Call timers.

3 Select Balance information.

4 Select Call or Set number.

1 Press OK. Select Calls & Times.

2 Select Call timers.

3 Select Reminder.

4 Select On to activate the Call timer.

5 Enter the call timer interval (e.g.: 2 = a beep sounds every 2 minutes whilst in conversation).

6 Press OK to validate the entry.

1 Press OK. Select Calls & Times.

2 Select Call timers.

3 Select Reset.

4 Select Yes.

5 Enter the phone lock code and press OK.

1 Press OK. Select Calls & Times.

2 Select Call costs.

3 Select Display cost type.

4 Select Currency. The current currency unit value is displayed.

5 Select Modify. Enter your PIN 2 code and press OK.

6 Enter the currency name (up to 3 letters). Press OK to validate.

7 Enter the unit cost (e.g.: 0.15 Euro per minute). And press OK to validate.

32-

Calls & Times

To set call cost type to units:

SETTING THE CREDIT LIMIT (SUBSCRIPTION DEPENDENT)

You may also be able to set a credit limit to your calls. Once the credit limit has been reached,

no more chargeable outgoing or incoming calls are allowed. You can however still make emer-

gency calls.

The PIN2 code is required to set the credit limit.

SHOW COSTS

CALL COSTS - RESETTING ALL COSTS TO ZERO

To reset all call costs to zero:

ALTERNATE LINE SERVICE - SELECTING LINE 2 (SUBSCRIPTION DEPENDENT)

Some operators support the use of a second line. You may then have two mobile phone numbers

(e.g. a business line plus a personal line). To use them you need to select the line to be used.

RECORDED CALL

This submenu allows you to play the recorded phone calls. If several phone conversations have

been recorded, they are played one after another.

1 Press OK. Select Calls & Times.

2 Select Call costs.

3 Select Display cost type.

4 Select Units.

When the cost type is set to units, the credit limit and the remaining credit are shown in units.

1 Press OK. Select Calls & Times.

2 Select Call costs.

3 Select Credit limit. The display indicates the current credit limit set.

4 Select Edit. Enter your PIN 2 code and press OK.

5 Enter the credit limit (use to enter a decimal point for currencies). Press OK to validate.

When a credit limit has been set, the selection from the 'Credit limit' display is Edit or Set no limit.

1 Press OK. Select Calls & Times.

2 Select Call costs.

3 Select Show.

4 Use up and down arrow keys to display the Last Call and All Calls or show the Remaining

credits.

The remaining credit is shown in either units or currency, as set by Cost Type menu above.

1 Press OK. Select Calls & Times.

2 Select Call costs.

3 Select Reset.

4 Select Yes.

5 Enter the PIN 2 number and press OK.

1 Press OK. Select Calls & Times.

2 Select Line selection.

The current line selection is displayed.

3 Use up and down arrow keys to scroll to the required line. Press OK to validate.

1. The Line selection sub-menu may not be available on your mobile. Please contact your service provider for further details

about this service.

2. Line 1 and Line 2 can be named (Office and Home for instance). Refer to My number menu (see my number(s) display,

page 37). Whichever line is selected to send calls, incoming calls can still be received on either line.

In compliance with European regulations, you are obliged to inform your correspondent before

recording a phone conversation.

1 Select Calls & Times, select Recorded call.

33-

Phonebook

PHONEBOOK

hone numbers can be stored in the phone and in the SIM card memories (=

phonebook). The phone memory can store up to 255 'extended' cards

(called 'phonebook cards'). These cards allow you to store different types of

information: family name, first name, home number, mobile number, two E-mail

addresses, postal address, business information, voice tag, group and a related

icon or picture. The SIM card memory capacity may vary according to your

operator or service provider. The SIM memory allows you to store one name,

one phone number and one voice tag per card.

Both the SIM and the phone memories are searched when reading the Phonebook contents.

STORING NAMES AND TELEPHONE NUMBERS

Names and numbers can be stored directly in the phonebook or copied from different sources

such as SMS messages, last dialled number list, etc.

There are several ways to store numbers in the phonebooks:

PHONE NAMES CARD

From the standby display:

Via the menu:

The icons list allows you to store your card with a symbol or an image that is

then displayed together with the caller’s name on incoming or outgoing calls

(select one of the icons and press ok).

The icon leads to the Pictures list. You can therefore select one of the

registered images (please see pictures, page 43) and link it with your

phonecard.

Press the left arrow to access the phonebook from the standby display.

1 Enter the number. Select Store.

2 Select Phone names.

3 The Home number, Work number, Mobile number or FAX number list is displayed,

thereby allowing you to select a number type.

4 Enter the card requested data and select Save to store the information.

1 Press OK. Select Phonebook.

2 Select Add name.

3 Select Phone names.

4 Enter the card requested data and select Save to store the information.

The Groups field allows you to identify the caller’s type according to entries you have previously set (see

creating a group of cards, page 36).

1. You can link about 100 images with your phonebook cards. If the images folder is full

(images too big), an error message is displayed.

2. The images remain attached to the phonebook cards even if you have deleted them from

the Pictures folder memory. You can modify or delete them one after the other via the phone-

book cards (see editing a phonebook or a sim name card, page 34).

3. When sending a phonebook card via the infrared port, the image is automatically sent

unless the file is protected.

4. The Image failure icon is displayed on incoming or outgoing calls if a problem related to the

image has been detected by the mobile.

34-

Phonebook

SIM NAMES CARD

From the standby display:

Via the menu:

STORING A RECEIVED NUMBER

Numbers stored in the last dialled, received, unanswered call information and SMS message

locations can also be stored in the phonebook:

COPYING ALL NAMES AND NUMBERS

You can copy all the names cards: from the Phone to the SIM card and from the SIM card to the Phone.

EDITING A PHONEBOOK OR A SIM NAME CARD

From the standby display:

Via the menu:

1 Enter the number. Select Store.

2 Select SIM names.

3 Fill in the available fields and select OK to validate your entries.

4 Select Save to store the card.

1 Press OK. Select Phonebook.

2 Select Add name.

3 Select SIM names.

4 Enter the name and select OK.

5 Enter the number and select OK.

6 Select Save to store the card.

1 With a received call, unanswered call or SMS message select Options.

2 For an SMS message, select Numbers if the number is contained in an SMS. The message

number(s) is/are displayed. Select one if several numbers are available.

2’ For received and unanswered calls, select Store.

3 Follow the above mentioned procedure to create a phone name or a SIM name card then

select Save to store the card.

1. While entering a number, selecting Clear once deletes the last character. Holding the Clear key deletes the

whole number.

2. The *, +, p (pause) and _ characters- which are accessible by pressing and holding the key when regis-

tering a number - can be stored as part of numbers.

3. You can use _ (wild card spaces) to store numbers (wild card spaces cannot be obtained when registering

a number from the standby display).

When calling a number containing wild card spaces, select the number from the phonebook, select Options or

press on the Call/Send key and enter the number corresponding to the wild card spaces (=missing figures).

4. If the SIM card or phone memory are full, a warning message is displayed on the phonebook selection.

1 Press OK. Select Phonebook.

2 Select Read.

3 Select Options.

4 Select Copy all names.

5 Select Phone to SIM or SIM to phone.

All the names are copied unless the SIM card memory does not bear enough free space when

copying the Phone entries to the SIM card. A warning message is then displayed.

If your Phonebook cards bear more than one number (home, mobile, work, fax numbers), the first available

number from the list is copied to the corresponding SIM card entry.

1 Press the left arrow to access the phonebook.

2 Scroll down to the card you want to access and select OK.

3 Scroll down to the field(s) you want to modify and amend it/them. Select Save to store the

changes.

1 Press OK. Select Phonebook.

2 Select Read.

35-

Phonebook

You can create a voice dialling pattern on phonebook cards. This voice dialling pattern can only

be recorded in edition mode.

Recording a Voice dialling pattern:

VIEWING AND CALLING PHONEBOOK NUMBERS

There are two ways of viewing and calling entries stored in the phonebook:

Directly from the standby display:

Via the menu:

The list of phonebook entries is displayed in alphabetical order.

VOICE DIALLING

You can make a call by using your voice.

To create a voice pattern:

3 Select one of the stored cards.

4 Select Options.

5 Select View.

6 Scroll down to the field(s) you want to modify and amend it/them. Select Save to store the changes.

1 Press the left arrow key (from the standby display) to access the phonebook.

2 Scroll down to the card you want to access and select OK or select Options then select View.

3 Scroll down to the Voice dialling field and select OK. Select New to record the voice pattern or

select Options then Record if a voice pattern is already recorded and you want to change it.

Repeat the name until it is stored (minimum = twice). Pronounce it as clearly as possible and

in a quiet environment. When the voice patterns match, Stored is displayed.

You may have to select the number, the voice dialling pattern has to be attached if several numbers are stored

on the card. Select Home number, Mobile number or Work number if you have registered several numbers on

a phonebook card.

1 Press the left arrow key to display the phonebook list.

2 To access the required name, either scroll up or down using the up and down arrows or

press a numeric key to access the different letters associated with the key. E.g: press

twice to reach the names starting with letter 'B'.

3 Press the call key or select Options then select Call.

1 Press OK. Select Phonebook.

2 Select Read to display the phonebook list, then scroll up and down to the required name or

press a numeric key to access the different letters associated with the key. E.g: press twice

to access the names starting with letter 'B'.

3 Press the call key or select Options then select Call.

1. Selecting a group from the Group selection displays the names/phone numbers of the corresponding group.

This group is then displayed when next reading the Phonebook contents.

2. Selecting Options displays the following menu choice: View, Call, Add name, Delete, Copy, Move, Group

selection (to select All names, the Phone names only, the SIM names only or the groups members), Send

by... Infrared port or SMS, Send SMS to.

3. If several phone numbers are stored on a Phone name card, scroll down to the required number and select

it before activating the call.

1 Press OK

Select Phonebook.

2 Select Voice dialling.

3 Select New entry. All name entries are displayed.

4 Use the up and down arrow keys to select the card you want to use and press OK.

If several phone numbers are registered on a card (e.g. Home number, Mobile number or

Work number) select one by pressing OK.

5 You are then prompted to pronounce the name at least twice (pronounce it as clearly as pos-

sible).Stored is displayed when both voice patterns match.

If the voice patterns do not match, Failed is displayed.

Repeat the whole voice registration procedure again.

36-

Phonebook

To view the voice dialling numbers list:

To remove all phone numbers from the voice dialling list:

To call a phone number using a voice pattern:

FREE SPACE IN THE PHONEBOOK

To view the remaining capacity in the phonebook:

CREATING A GROUP OF CARDS

Groups of cards can be defined for the phonebook. This feature allows you to group certain

cards and to play a specific melody on receiving an incoming call from one of the group mem-

bers.

To create a group:

Groups characteristics can be modified or deleted (when in the Groups menu, select OK to

amend the settings or select Delete to erase the group).

To modify a group:

1 Press OK

Select Phonebook.

2 Select Voice dialling.

3 Select List.

4 Use the up and down arrow keys to view the requested entry.

5 Press Options to play the voice pattern, select Play Back, to remove voice tag from the

voice dialling list, select Erase, or to create a new voice pattern select Record.

1 Press OK

Select Phonebook.

2 Select Voice dialling.

3 Select Delete all.

1 From the standby display, press and hold the call key.

2 Pronounce the name as clearly as possible.

3 The name called as well as an animated icon are then displayed and the call proceeds

as normal.

1 Press OK. Select Phonebook.

2 Select Storage used to get to the Phone names Storage used; press the down arrow key to

get to the SIM card Storage used.

If available, the free memories in the FDN list are also displayed. Please see fixed dialling numbers, page 37

for more information on FDN numbers.

1 Press OK. Select Phonebook.

2 Select Groups.

3 Select any blank template [...] and select OK. The following items are displayed:

ITEMFUNCTION

Group name To enter and store a group name.

Melody To select a melody to be used as a ringtone on group member calls.

4 Enter or select the requested data. Press OK to validate.

5 Press Save to store the defined group.

1 Press OK. Select Phonebook.

2 Select Groups.

3 Select the group to be modified and select OK then select the group name and/or the mel-

ody. Select the new parameters (name/melody).

4 Select Save to store your settings.

37-

Phonebook

To select a group when storing a number:

MY CARD

My Card is a specific storage location where you can enter personal data. You can easily ac-

cess My card and send its contents to another device via the infrared port or SMS.

My Card contents is identical to the phone cards contents except for the Groups and Voice di-

alling fields.

To enter My Card data set:

To send My Card via the Infrared port or by SMS:

MY NUMBER(S) DISPLAY

The phone can display your main line (Line 1) mobile number, the mobile number for Line 2

(Alternate Line Service) and your data and fax numbers (these are SIM card dependent). These

numbers may be stored in the SIM card. You can also enter them manually.

To view, name and edit your own number(s),

FIXED DIALLING NUMBERS

Fixed dialling is a feature that restricts outgoing calls to 'fixed' numbers or 'prefixes' contained

in SIM cards that support this feature. When the Fixed Dialling Numbers (FDN) feature is acti-

vated, dialling numbers, diverting calls and sending SMS to numbers not registered in the FDN

list is forbidden. The number of FDN entries to be stored depends on the SIM card capacity.

Activating the FDN feature or registering numbers in the FDN list is PIN 2 protected (contact

your service provider to get the PIN 2 number).

The following menu (Fixed dialling) and operations are only available on your mobile if your SIM

card allows fixed dialling.

1 Repeat the Phone names storage procedure (see storing names and telephone numbers,

page 33) and fill in the Phone names card.

2 Scroll down to Groups and select OK.

3 Select one of the displayed groups from the list.

4 Select Save to store your settings.

Groups can only be set for the Phone names cards (not for the SIM names cards).

1 Press OK. Select Phonebook.

2 Select My Card.

3 Select View

and enter the requested information as for a phonebook card (validate each

entry by selecting OK).

4 Select Save to store your card.

1 Press OK. Select Phonebook

2 Select My Card.

3 Select Send by... then select Infrared port: the infrared port automatically opens and sends

the card. Or select SMS, then enter the mobile number to send the card to or select it from

the Names list and press OK.

Press and hold the up arrow key from the standby display to access Send my card by... Infrared port/SMS.

1 Press OK

Select Phonebook

2 Select My numbers. The mobile number for Line 1 is displayed if it is stored in the SIM card.

If not, select Edit and enter your number and your name in (select OK to save the entered

information).

3 Scroll down to view or enter Line 2, your fax and data numbers.

1. Line 2, data and fax numbers can only be accessed if your SIM card has these subscriptions.

2. My numbers availability depends on your service provider.

38-

Phonebook

To activate or deactivate FDN operation:

To view the numbers stored in the FDN list:

To add a new number to the FDN list:

EXPORT

The purpose of the Export feature is to allow you to send the phonebook contents to another

device (e.g. a pc). You first need to export the card(s) to the Fun & Media box Others sub-menu

(see others, page 47).

1 Press OK

Select Phonebook

2 Select Fixed dialling. Select Status.

3 Select On or Off. Enter the PIN2 number.

4 Select OK to validate.

The Fixed dialling sub-menu may not be available on your mobile. Please contact your service provider for fur-

ther details.

1 Press OK

Select Phonebook

2 Select Fixed Dialling.

3 Select View to view the FDN list entries. Pressing Options allows you to view, call, add a

name, delete, copy or move numbers to the phone or SIM card memory, but also to send

these numbers by Infrared port or SMS, or send a SMS.

1 Press OK

Select Phonebook.

2 Select Fixed dialling.

3 Select Add new.

4 Enter you PIN2 code and press OK;

5 Fill in the displayed fields as in any SIM name card then select Save to store your settings.

1. Wild card spaces can be used with the numbers stored in the FDN list. E.g. number +441707 278_ _ 9

allows calls to all numbers from 278009 to 278999 to be dialled. The number can be edited and dialled from

the standby display.

2. You may be asked to enter your PIN2 code.

1 Press OK. Select Phonebook.

2 Select Export..., then select Yes. The entire contents of the phonebook are exported and

grouped together in a Vcard file and stored in Fun & Media box/Others.

39-

Camera

CAMERA

he camera application allows you to take pictures with your mobile (with

clamshell open or closed).

These pictures can then be used to:

- personalise your standby display, your Welcome or your Goodbye screen

(please see setting an image as a main screen, a welcome screen or a goodbye

screen from the pictures folder, page 44),

- be sent to other devices (mobile phones, pc) by E-mail (see mail system, page 54),

MMS (see composing an mms, page 55) or infrared port (see infrared port, page 20), match your

phone cards (see phone names card, page 33).

You can take pictures in 3 sizes: large (VGA: 640x480 pixels), normal (160x120 pixels) or por-

trait (60x80 pixels).

MOBILE POSITIONING

The use of the camera and the sending, forwarding and reproducing of the pictures taken are

subject to property and privacy rights.Do not take a picture unless authorised.

OPEN CLAMSHELL:CLOSED CLAMSHELL:

1. Please check that the position of the subject on the main screen (open clamshell) or on the external screen

(closed clamshell) is correct.

2. You can activate the Camera application directly by pressing and holding the side key (closed clamshell).

Subject in front of the mobile.

Subject

behind the

mobile.

40-

Camera

TAKING A PICTURE

FROM THE MAIN MENU:

FROM THE STANDBY DISPLAY:

Once it has been captured, the picture is displayed. You can then access the following options

sub menu:

FROM ANOTHER APPLICATION:

The Camera application can be activated from the Options menu whilst using other applications

on the mobile. The resolution types available vary according to the application. The camera-

accessible applications are the following:

To access the camera application from the Phonebook:

To access the camera application from the Settings menu:

1 Press OK. Select Camera.

2 Press OK or press the side key to take your picture.

1 Press and hold the side key to access the camera applications. When the clamshell is open

the preview is performed on the main screen; when the clamshell is closed, the preview is

performed on the external screen.

2 Press OK or press on the side key to take your picture.

Opening or closing the clamshell will swap the preview to the new active screen.

OPTIONSDESCRIPTION

Send by... To send the picture via the Infrared port, by Mail or by MMS.

Rename To change the name of the picture.

Set as... To set the picture as a Main Screen, a Welcome or a Goodbye screen

image.

Details To view information about the name, resolution, size, date and file

protection status.

Delete To delete the current picture.

Camera To go back to the preview screen.

Full view To see the picture on full screen.

Zoom +/- To change the full view mode to a Smaller, Medium and Larger size.

APPLICATIONSAVAILABLE RESOLUTION

phonebook portrait.

settings (main,

welcome or

goodbye screen)

portrait and normal.

i-mode mail all.

1 Press OK. Select Phonebook.

2 Select Add name, then Phone names.

3 Once in the phone card, select Picture then select .

4 From the picture browser, select Options.

5 Select Camera.

1 Press OK. Select Settings.

2 Select Display, then Main screen, Welcome screen or Goodbye screen.

3 Scroll down to My Picture and select Pictures (left soft key).

4 From the picture browser, select Options.

5 Select Camera.

41-

Camera

To access the camera application from the Mail menu:

ADJUSTING YOUR PICTURE

You can adjust 4 types of settings before taking a picture: Resolution, Exposure, Brightness

and Zoom. These settings must be entered from the preview screen.

TO SELECT THE PICTURE SIZE:

TO SELECT THE EXPOSURE MODE:

These modes allow you to optimise the picture quality according to the context.

TO SELECT THE BRIGHTNESS:

TO ADJUST THE ZOOM:

OPTIONS MENU

You can set default settings on the camera application. These parameters are then automati-

cally activated when entering the camera application:

1 From the standby display, select Mail (left softkey) or select i-mode then Mail.

2 Select Compose mail, scroll down to the Attachment field, press OK and select Pictures.

2’ Or select Compose MMS, select SMIL and then Add image.

3 From the pictures browser, select Options.

4 Select Camera.

If a call is in progress, access to the camera is not possible.

1 Use the left or right arrow keys to select the Large (VGA), Normal or Portrait mode.

2 Press OK to take a picture.

1 Press the up or down arrow key to access the exposure mode selection.

2 Use the left or right arrow to access the Standard, Sport (moving subject) or

Night (dark context) mode.

3 Press OK to take a picture.

1 Press the up or down arrow key to access the brightness setting mode.

2 Select one of the seven brightness levels.

3 Press OK to take a picture.

1 Use the up or down arrow key to access the zoom mode (the zoom is not

available from the Large VGA mode).

2 Use the left or right arrow key to zoom in or out: .

3 Press OK to take a picture.

1 Press OK. Select Camera.

2 Select Options then select Settings:

Image resolution Large (VGA: 640x480 pixels)

Normal (160x120 pixels)

Portrait (60x80 pixels)

Image quality High, Normal and Basic

Shutter sound 1, 2, 3 (= volume levels)

1. The Shutter sound is a ’Camera-like’ sound that is heard when a picture is captured.

2. You may not be able to deactivate the shutter sound option on your mobile.

42-

Camera

STORING/ERASING YOUR PICTURE

When a picture is captured (see above taking a picture, page 40), the ’Keep this photo ?’ mes-

sage is displayed.

The image is automatically stored in the Fun & Media box Pictures sub-folder (see pictures,

page 43). It is stored as a .jpg file.

SELF TIMER

The camera application offers the possibility of taking delayed pictures, thereby enabling the

user to be on the picture.

The 10 second countdown is displayed on the main screen. No countdown information is dis-

played on the external screen but the backlight flashes to indicate that the process has been

activate. The picture is automatically taken after the countdown and the Self timer function au-

tomatically reverts to Off.

1 Select Clear thenYes to erase it.

1 Press OK key and then Camera.

2 Press Options.

3 Select Self timer capture.

4 Clamshell opened: press OK or the side key.

Clamshell closed: press the side key.

5 The capture is performed after 10 seconds.

If any event occurs after countdown has started, the selftimer reverts to Off. Once the event has been processed,

the mobile returns to the preview screen.

43-

Fun & Media box

FUN & MEDIA BOX

his menu groups and manages all the images, melodies, speech notes,

Games and applications contained in the mobile as well as all the files received

via the i-mode browser, the infrared port, Mail, MMS or SMS.

PICTURES

The Pictures sub-menu allows you to view and set pre-set, stored (via the Camera and the In-

frared port) and downloaded images as a Main screen, a Welcome or a Goodbye screen in or-

der to configure and personalise your mobile screen (see display, page 61).

You can download and record images via the i-mode browser and mailer, the Infrared port and the Camera

application. It is then possible to store them and/or set them as a Main screen, a Welcome screen or a Good-

bye screen.Your mobile allows you to set one Main screen, one Welcome screen or one Goodbye screen

from the downloaded and/or stored images (to download and store images, see the following sections).

PICTURES BROWSER

The Pictures browser allows you to display the stored images as

a list or as a mosaic. When the pictures are displayed as a list the

screen is divided into two parts: the image names list and the se-

lected image. When they are displayed as a mosaic (Thumbnails

mode: see Options/My preferences below) the screen contains a

mosaic of pictures and the name of the selected image.

VIEWING AN IMAGE

OPTIONS

The Pictures folder Options list contains the following items:

Main screen Welcome screen/

Goodbye screen

1 Press OK. Select Fun & Media box.

2 Select Pictures.

3 Scroll the images list or mosaic. Select the required image or select Album 1 or Album 2 to

view their contents (press OK).

4 Press OK or Options and Full view to view the selected image in full size.

OPTIONSDESCRIPTION

View To view the full image and name.

Send by... To send the image via infrared port, Mail or MMS.

Set as... To set the image as a Main screen, as a Welcome screen on switching on

your mobile or as a Goodbye animation on switching it off.

Details To show the name, resolution, size, registering date and protection status

of the current file.

Delete To delete the current image.

Delete all To delete all the selected folder contents.

Move To move the current image to Pictures, Album 1 or Album 2.

My preferences To sort the stored images (by date, name, size) and select a view mode (List

or Thumbnails) to change the Picture browser mode.

44-

Fun & Media box

When viewing an image, an Options menu is available:

SETTING AN IMAGE AS A MAIN SCREEN, A WELCOME SCREEN OR A GOODBYE SCREEN FROM THE

PICTURES FOLDER

CROPPING

If the image you want to set as a Main screen is too large to be inserted into the

available space, your phone will propose a cropped image.

This allows you to move the image left, right, up and down (cursor key). The im-

age you have cropped is then displayed as such on the mobile (as a Main

screen).

DOWNLOADING IMAGES VIA THE I-MODE

Please refer to ’quick access to i-mode’ page59.

RECEIVING IMAGES VIA THE INFRARED PORT

1. Album 1 and Album 2 are sub-folders of the Pictures menu.

2. The Album 1 and Album 2 Options list only contains View and My preferences.

3. The sending of an image may not be allowed if it is exportation (copyright) protected (the ’File protected’

message is then displayed).

4. To send an image via the infrared port please see infrared port, page 20. To send an image via the Mail (E-

mail or MMS), please see mail system, page 54.

5. Error messages may be displayed when setting, viewing or storing an image:’File too big’: Please see error

messages, page 74; ’Decoding failure’: the image cannot be viewed by the phone.

6. The sending of images via the Infrared port may not be possible if the image is exportation protected. The

’File protected!’ message is then displayed.

OPTIONSDESCRIPTION

Send by... To send the picture via the Infrared port, by Mail or by MMS.

Rename To change the name of the picture.

Set as... To set the image as a Main screen, as a Welcome screen on switching on

your mobile or as a Goodbye screen on switching it off.

Details To show the name, resolution, size, registering date and protection status

of the current file.

Delete To delete the current picture.

Full view To see the picture on full screen.

Zoom +/- To change the picture view to a Smaller, Medium and Larger size.

Rotate... To rotate the picture to the right (90°), to the left (90°) or turnover (180°).

1 Press OK. Select Fun & Media box.

2 Select Pictures.

3 Use the up and down arrow keys to scroll through the image names list and select one.

Select Options and then Set as...

4 Select Set as Main screen, Set as Welcome screen or Set as Goodbye screen.

1 Select Set as... then select Main screen. If the image is too big, the crop screen is displayed.

2 Use the cursor key to move the image up, down, left or right (the availability of the four

arrows depends on the image size).

3 Select OK. Stored is then displayed.

1 Open the infrared port (see infrared port, page 20) and ensure that the infrared port of the

other appliance is facing your mobile infrared port so that the image transfer is correctly

done.

2 When you have received an image, select Options then select View.

3 Select Options.

4 Select Full view, Set as... Main screen, Welcome screen or Goodbye screen, Details or

Zoom +/-.

1. The images you receive via the infrared port are automaticaly stored in the Fun & Media box Pictures sub-folder.

2. To select and activate a Main screen, a Welcome screen or a Goodbye screen, see pictures, page 43.

45-

Fun & Media box

MELODIES

Melodies sub-menu groups Downloaded and Predefined melodies.

MELODIES

Select a ringtone from among the list of melodies available on your mobile.

MELODY DOWNLOAD

You can download melodies from the internet, from interactive voice servers, from the i-mode

browser and mailer or via the infrared port .

In addition to the usual SMS download of melodies, you can download melodies by browsing

internet web sites.

This is done via the 'Digiplug' or the Nokia™ Smart Messaging system for Mitsubishi Electric

phones. The principle is the following:

You can also receive melodies via the Infrared port.

Formats managed by the phone are .mid, .mld, .dgp, .nsm and .imy formats.

To play a downloaded melody from the reception screen:

To store a downloaded melody:

To discard a downloaded melody:

GAMES & APPLICATIONS

This sub-menu allows you to activate games and various applications that may be stored on

your mobile, download new games and applications via the i-mode browser, upgrade or delete

the stored games and applications.

Your mobile may contain pre-set games or applications (operator dependent).

You can store/download up to 10 games and/or applications on your mobile.

1 Press OK. Select Fun & Media box.

2 Select Melodies.

3 Scroll up or down and select a melody. The melody is played within 2 seconds. The Options

menu allows you to Play the melody, to Delete it, Delete all, Set it as ringtone, Set it as

alarm, Set it as ringtone L2 (if Line2 is activated), Set it as Welcome melody or Goodbye

melody, Send it by... Mail, MMS and Infrared port.

The sending of an image by Mail or by MMS may be denied according to the image type.

1 Melodies are stored on a Web Digiplug server.

2 Select your Mitsubishi Electric mobile type to access a choice of melodies.

3 Select one or more melodies to be downloaded to your phone.

4 All selected melodies are downloaded via SMS.

5 Once the melody is received, a reception screen is displayed. Press OK or select Options

then Play to play the received melody.

To set a melody as a ringtone, an alarm, a Welcome or a Goodbye, please see tones, page

60.

1 Select OK or select Options then Play.

3 Select Exit to stop playing.

The melody is automatically saved as soon as it is received by the mobile. It is stored in the Melodies folder.

1 Select Options.

2 Select Store.

If the memory space is sufficient, the melody is automatically stored in the Melodies file. If

there is no space left, you need to select one or several melody(ies) to be replaced from the

set of melodies (melodies associated with a ring feature cannot be deleted).

Once stored, a message is displayed. The melody can be played and selected via the

Fun & Mediabox menu.

1 Select Discard. The melody is erased and is therefore lost for further installation.

46-

Fun & Media box

TO ACTIVATE A GAME/APPLICATION:

or:

Select Options to

get to:

or press to access the following System menu:

SPEECH NOTES

This feature allows you to record speech notes on your mobile

TO RECORD A SPEECH NOTE:

TO PLAY A SPEECH NOTE:

1 Press OK. Select Fun & Media box.

2 Select Games & applications.

3 Select one of the available games/applications.

1 Press and hold the i-mode softkey from the standby display.

3 Select one of the available games/applications.

1. Depending on the game/application stored on your mobile, you may need to activate a network connection

via the i-mode browser. Select Yes or No.

2. The downloaded games/applications can only be activated if the mobile contains the SIM card that was

used during the downloading process.

OPTIONSDESCRIPTION

1. Properties To display detailed information about the game or application (name, URL,

size, etc.).

2. Upgrade To download the latest version of the game from the network.

3. Delete To delete the current game or application from your mobile.

4. Network

connection

To enable/disable automatic connection to the network or to confirm the

activation of the network connection prior to the game/application start.

5. Auto Start

settings

To enable or disable the automatic activation of the current game or

application.

The items on this options list may vary according to the contents of the selected application.

OPTIONSDESCRIPTION

1. Description

Setting

To enable/disable an Application Description File (ADF) display before

downloading a new game/application.

2. Delete all To delete all the mobile games/applications.

3. Storage

status

To view the used memory, information about the available remaining

memory space, as well as the name and size of each stored game/

application.

4. Trace Info. To view the errors history list.

5. About To view the Games & Applications software details.

The items of this options list may vary according to the contents of the page displayed.

1 Press OK. Select Fun & Media box.

2 Select Speech note.

3 If no speech note has been recorded, select New. If one/several speech note(s) is/are stored

in the mobile, select Options then Record new.

4 Select Stop to end the recording.

5 Enter the note name and press OK.

1 Press OK. Select Fun & Media box.

2 Select Speech note.

3 Scroll up or down to the required speech note. Press OK or Select Options then select Play.

47-

Fun & Media box

CONTENTS OF THE OPTIONS MENU :

OTHERS

This file allows you to store vcard files (Phonebook), vcalendar files (Diary cards), text files and

files with unknown/unsupported format.

TO DISPLAY THE OTHERS FILE CONTENTS:

The following Options list is available:

DATA EXCHANGE

The purpose of this feature is to allow the easy transfer of vCards and vCalendars. vCards and

vCalendars are phonebook cards and diary cards that are sent or received to/from another de-

vice (mobile, pc,...).

STORING A RECEIVED VCARD

OPTIONSDESCRIPTION

Play To play the recorded speech note(s).

Record new To record a new speech note.

Send by... To send the speech note via the Infrared port, or by SMS.

Delete To delete the current speech note.

Delete all To delete all the Speech note contents.

Rename To change the name of the current speech note.

Details To view information about the name, file size and recording date, and file

protection status.

The speech note list can be accessed from the standby display. Press and hold the right arrow key to play the

stored memos. Press and hold the left arrow key to record a note

1 Press OK. Select Fun & Media box.

2 Select Others.

3 Use the up and down arrow keys to scroll the required file.

OPTIONSDESCRIPTION

View To view the file contents.

Store To store the file in the required application.

Send by...

Infrared port/SMS: to send the current file via the infrared port or by SMS

for vCards and vCalendars, to send the current file via the infrared port for

text or any other file type.

Delete To delete the current file.

Delete all To delete all the folder files.

Details To view the current file name, size, storage date and file protection status

information.

1. The contents of this Options list may vary according to the file type.

2. You cannot send any copyright protected file (the ’File protected’ message is displayed on any attempt to

send copyright protected files).

1 Select Options (left softkey) on the information screen when you have received the file.

2 Select View.

3 The received file is displayed. Select Store.

4 Select Phone names, Sim names, Sim fixed or My card. The vCard is then stored.

A received file may contain several vcards. Select the one(s) you want to keep, then select Store.

48-

Fun & Media box

STORING A RECEIVED VCALENDAR

SENDING A VCARD OR A VCALENDAR BY SMS

STORAGE USED

To consult the percentage of memory used for the Pictures, Melodies, Others and Speech note

folders:

1 Select Options (left softkey) on the information screen when you have received the file.

2 Select View.

3 The received file is displayed. Select Store.

A received file may contain several vcalendars. Select the one(s) you want to keep, then select Store.

1 Select the vCard or the vCalendar you wish to transfer as explained in diary, page 16, calen-

dar, page 16 and tasks list, page 18 or select it from Others.

2 Select Options.

3 Select Send by... SMS. A warning may be displayed regarding the number of required to

send the card (where more than 1 SMS is required).

4 Select OK if you wish to continue.

5 Enter the number to which you want to send the vCard or the vCalendar, or select a name

from the Names list.

1 Press OK. Select Fun & media box.

2 Select Storage used. The total memory used is displayed (all file types). Select Details to

view storage information per file type.

3 Use the up and down arrow keys to scroll to the required information type (Pictures, Melo-

dies, Speech note, Others).

The Fun & Media box space is managed as a single folder. The Pictures, Melodies, Others and Speech note

files therefore share the same space in the mobile.

You may not be able to store more files. You can however remove pictures, for instance, to free some space

and create a new Speech note.

49-

Calendar/Network services

CALENDAR

he availability of this menu is network dependent. If your SIM card does not

contain an access to the Network services the Calendar menu is accessible

from the Menu icons.

Please see calendar, page 16 for full details.

NETWORK SERVICES

he availability of this menu is network dependent (it may not be available or

be named Network services, Network,...).

Your network operator may provide value added services, information and con-

tact phone numbers. These services and phone numbers are stored in your SIM

card and appear on the phone menu as they are accessible from the Network

serv. menu. Please contact your service provider for further details.

Some operators may provide up to two services on the same SIM card. The dis-

played sub-menus in the Network serv. menu may then be named Applications, Services or

Information.

Three kinds of services can be registered in this menu:

SIM APPLICATION TOOL KIT

An automatic way to provide services related to your network. These services are SIM card de-

pendent.

SND NUMBERS STORED IN THE SIM CARD

Up to 32 numbers may be stored in the SIM. These numbers cannot be modified or deleted.

INFORMATION NUMBERS

A list or a menu allowing calls to network or information services offered by the network.

50-

i-mode

Compact NetFront is a registered trademark or trademark of Access Co. Ltd.

in Japan and selected countries worldwide.

our mobile allows you to access dedicated i-mode web sites and webpages

thanks to the i-mode standards. You can for instance send and receive e-mails

and MMS, connect to i-mode sites and download images and 32 tone melodies for

your mobile (see setting an image as a main screen, a welcome screen or a good-

bye screen from the pictures folder, page 44, welcome screen, page 62, goodbye

screen, page 62).

Access to the i-mode is network dependent. Please contact your service provider for

full details about subscription conditions. To be able to use the i-mode features on your mobile, you

must have a GPRS subscription.

USER INTERFACE

Whilst navigating the i-mode menu, please note that the up, down, left and right ar-

row keys allow you to access further settings or fields to be filled in, as well as valida-

tion and cancellation options (Ok, Cancel, Send, Save, etc.).

Scroll up or down to highlight (blue highlighting) the correct field, select an op-

tion or enter text. Depending on the menu you are in, you may have to scroll

down many times until you reach the correct option.

i-mode MENU

This section describes access to the i-mode lock, i-mode profiles and New mail alert.

To access these features:

i-mode LOCK

The purpose of this feature is to lock access to all i-mode features, thereby protecting your mo-

bile from any unauthorised operation.

i-mode PROFILES

To use the i-mode and connect to i-mode webpage, you must first need define and store the

profile details, then select the required i-mode profile.

NEW MAIL ALERT

This sub-menu allows you to define the alert melody that is played on new incoming mail or MMS.

1 Press OK. Select i-mode.

2 Select i-mode lock.

3 Select lock.

4 Enter your 4 digit i-mode lock code and select OK.

1. The default i-mode lock code is 0000. To change the code, select Change lock code instead of lock and follow the

instructions displayed.

2. Mail reception is not affected by the i-mode lock. However it does not allow you to read the e-mails received.

1 Press OK. Select i-mode.

2 Select i-mode profiles.

3 Select one of the available profiles and select Options (left softkey).

4 Select Select.

51-

i-mode

To select a melody:

i-mode APPLICATIONS

The i-mode applications menu allows access to the main i-mode features. To access it:

Whilst browsing an i-mode site, select by pressing the call key to access the fol-

lowing options:

MAIL

This feature allows you to compose e-mails and MMS, to access the inbox, sent mail, drafts,

new mails and the mail settings. Please refer to mail system, page 54 for details about the Mail

sub-menu.

BOOKMARKS

You can view the list of bookmarked pages (see i-menu page51):

Select by pressing the call key to access to the following options:

1 Press OK. Select i-mode.

2 Select New mail alert.

3 Select Alert and select On .

4 Select Melody and select one of the available ring tones.

5 Select Save to store the settings.

1. The Alert field must be set to On to allow access to the melodies list.

2. If Alert is set to Off, the New e-mail icon only is displayed on new incoming e-mail.

3. The default melodies and downloaded melodies are available from the Melody list.

1 From the standby screen select i-mode.

OPTION DESCRIPTION

1. Add bookmark To select the current page as a bookmark.

2. Save image To store the displayed image in the Pictures folder.

3. Save page To store the current page.

4. Save phone To store the displayed phone number in the phonebook.

5. Go to webpage To enter a webpage address or select one from a list (see go to

webpage, page 52 ).

6. Reload To refresh the page displayed.

7. Page info To display the URL of the current page.

The items on this options list may vary according to the contents of the page displayed.

1 From the standby screen select i-mode.

2 Select Bookmarks or press .

OPTION DESCRIPTION

1. Open To display the selected bookmarked page.

2. Edit title To modify the selected bookmark name.

3. Delete one To delete the selected bookmark.

4. Delete all To delete all the bookmarks list.

52-

i-mode

GO TO WEBPAGE

You can go to a specific webpage by entering the page address or selecting it from the Address

history list.

To go to a specific page:

To go back to a page you have previously visited:

SAVED PAGES

You can view pages that you have previously saved without having to connect to the i-mode.

Scroll down to the required page name, then select by pressing the call key to access the

following options:

Once on a saved page, you can edit its contents. Select by pressing the call key to access

the following options:

SETTINGS

This sub-menu allows you to customise your connection settings.

For optimum use of the i-mode and the way information is displayed on your mobile whilst in

connection you may wish to adjust a few settings.

For each of the following settings:

Then go through the following instructions. When you have validated your setting the mobile

automatically revert to the settings menu.

1 From the standby screen select i-mode.

2 Select Go to webpage or press .

3 Select Enter address or press and press OK then enter the required webpage address.

Select OK.

4 Press down arrow key so that is highlighted and press OK to confirm connection.

1 From the standby screen select i-mode.

2 Select Go to webpage or press .

3 Select Address history or press .

4 Scroll to the required page address and select OK to display it.

1 From the standby screen select i-mode.

2 Select Saved pages or press .

OPTION DESCRIPTION

1. Open To display the selected saved page.

2. Edit title To modify the selected page name.

3. Protect

on/off

To protect/unprotect the selected saved page from deletion.

4. Delete one To delete the selected saved page.

5. Delete all To delete all the saved pages.

OPTION DESCRIPTION

1. Save image To store the page image(s) in the pictures browser.

2. Edit title To modify the selected page name.

3. Page info To display the page URL (address) information.

4. Protect

on/off

To protect/unprotect the selected saved page from deletion.

5. Delete To delete the current saved page.

The items on this options list may vary according to the contents of the page displayed.

1 From the standby screen select i-mode.

2 Select Settings or press

53-

i-mode

SETTING THE TIME OUT

This allows you to set the time limit for i-mode disconnection when there is no response from

the network:

SHOWING TABLES

You can choose whether or not tables should be displayed when available on i-mode webpages.

LOADING IMAGES

This allows you to choose whether or not your mobile can download and therefore display the

images contained on the webpages.

ADJUSTING TEXT

The text on webpages may not automatically fit the size of your mobile display. This setting al-

lows you to wrap the text and adjust it so that it fits the screen of your mobile.

READING CERTIFICATES

Certificates are used for network security exchange (e.g. for secure payment transactions).

SENDING TERMINAL INFO

To allow or forbid the automatic sending of mobile-related information (linked to the i-mode) to

the server.

SET HOMEPAGE

To define the homepage address. This allows you to access your favourite webpage via the Go

to webpage menu (see ii-mode applications, page 51).

CHECKING THE SETTINGS

You can check the status of all your settings via this menu.

GOING BACK

1 Select Set time out or press .

2 Select 60 seconds, 90 seconds or Disabled (if you do not want automatic disconnection).

3 Scroll down as many times as necessary until is highlighted and press OK to validate.

1 Select Show tables or press .

2 Select Yes or No.

3 Scroll down as many times as necessary until is highlighted and press OK to validate.

1 Select Load images or press .

2 Select Yes or No.

3 Scroll down as many times as necessary until is highlighted and press OK to validate.

1 Select Wrap text or press .

2 Select Yes or No.

3 Scroll down as many times as necessary until is highlighted and press OK to validate.

1 Select Certificates or press .

2 Select one of the Certificates available on the mobile and press OK. The selected certificate

is then displayed.

3 Press Cancel (left soft key) to return to the certificates list.

1 Select Send terminal info or press .

2 Select Yes or No.

3 Scroll down as many times as necessary until is highlighted and press OK to validate.

1 Select Set homepage or press .

2 Select Valid and enter the http:// address.

3 Scroll down as many times as necessary until is highlighted and press OK to validate.

1 Select Check settings or press to view the contents of each parameter.

1 Select Back or press to go back to the i-mode menu.

54-

i-mode

GETTING BACK TO THE MAIN MENU

Whilst adjusting or modifying one of the above features, selecting allows you to go back

to the Settings sub-menu and selecting i-mode allows you to go back to the i-mode main menu.

Whilst in the Settings menu, select Cancel, Back or to return to the i-mode main menu.

MAIL SYSTEM

Your mobile allows you to send and receive e-mails and MMS.

However the availability of these features is operator dependent. Please read the fol-

lowing instructions to configure your mail system and use the Mail menu.

You can access the i-mode Mail sub-menu in 2 ways:

or:

Once in the Mail sub-menu:

COMPOSING AN E-MAIL

Whilst writing your mail, you can access the Edit menu at any time by selecting (press the call key).

1 From the standby display select Mail.

1 From the standby screen select i-mode.

2 Select Mail or press .

1. The contents of the Mail menu may vary according to your service provider.

2. Pressing on the left arrow key while navigating the Mail menu leads to the i-mode menu.

1 Select Compose mail or press .

2 Highlight Subject. Press OK and enter in the mail header text (30 characters maximum).

Press OK.

3 Highlight To1. Press OK and select one of the available names from the displayed list or

select More... then enter the required mail address or phone number. Press OK.

4 Highlight Message. Press OK and type in the mail text (maximum 10KB). Press OK.

5 Highlight the Attachment field if you want to add a melody or an image to your message.

Press OK then select Pictures or Melodies and select one of the available files. Press OK.

6 Scroll down as many times as necessary to highlight (to send your message)

or (to store your message in the Draft folder) and select OK to validate your choice.

1. The content of this page and the information to be entered is operator dependent.

2.The maximum content of the message text is 10 KB provided there is no header, no signature and no attached file.

Each additional text or file uses the available memory space and reduces the maximum content of the message text.

OPTION DESCRIPTION

Edit menu 1/2

1. Send To send your mail

2. Save To store your mail in the Draft folder

3. Attach image To attach a picture from the Fun & Media box menu.

4. Attach melody To attach a MIDI Melody from the Fun & Media box menu.

5. Add To To add (an) addressee(s)

6. Add Cc To add (a) secondary addressee(s)

7. Add Bcc To add (a) hidden addressee(s) - their name is not shown to the main and

secondary addressee(s).

Edit menu 2/2

1. Attach header To attach a pre-entered header (please make sure you have previously

written and stored one. See edit header, page 57).

2. Attach sign. To attach a pre-entered signature (please make sure you have previously

written and stored one. See edit signature, page 58).

3. Del. message To delete the contents of the message field.

4. Del. mail To delete the contents of the whole mail.

1. The items on this options list may vary according to the contents of the page displayed.

2. You can send your mail to a maximum of 5 people (To + Cc + Bcc)

55-

i-mode

COMPOSING AN MMS

The Multimedia Message Service (MMS) is a service that allows you to send and receive mes-

sages to and from other MMS enabled mobile phones. An MMS contain several slides com-

posed of text + image and/or melody/speech note.

Whilst in the Subject or To1 fields, you can access the Edit menu at any time by selecting

(press the call key)

Once the first page has been created, other options are available when selecting . You can

then add other slides, insert another slide before the current one or delete the current slide.

INBOX

TO VIEW THE RECEIVED MAILS AND MMS:

1 Select Compose MMS or press .

2 Highlight Subject. Press OK and type in the MMS header text (30 characters maximum).

Press OK.

3 Highlight To1. Press OK and select one of the available names from the list displayed or

select More... then enter the required mail address or phone number.Press OK.

OPTION DESCRIPTION

1. Send To send your MMS.

2. Save To store your MMS in the Draft folder.

3. Open

phonebook

To attach a picture from the Fun & Media box menu.

4. Add To To add (an) addressee(s).

5. Add Cc To add (a) secondary addressee(s).

6. Add Bcc To add (a) hidden addressee(s) - their name is not shown to the main and

secondary addressee(s).

7. Del. mail To delete the contents of the whole MMS.

1. The items on this options list may vary according to the contents of the page displayed.

OPTION DESCRIPTION

1. Add text To write your message text.

2. Add image To add one of your Pictures folder images.

3. Add audio To attach a MIDI Melody or a Speech note from the Fun & Media box menu.

4. Preview To preview the full page contents.

5. Background

colour

To select one of the available colours for the page(s) background (one

colour only per message).

6. Options A slide time option is available, allowing you to select the time each slide

remains displayed before switching to the next one.

4 Highlight SMIL. Press OK to access the Compose menu. The following options are available:

The items on this options list may vary according to the contents of the page displayed.

1 Select Inbox or press .

2 Scroll to the required mail and select OK to view it.

56-

i-mode

Whilst in the Inbox, selecting (press the call key) allows you to:

When viewing a specific mail, selecting (press the call key) allows you to:

SENT MAIL

This sub-menu allows you to view and edit sent mails and MMS.

You must have saved your mails before sending them to be able to find them in the Sent mail

sub-menu.

Whilst reading a mail, selecting (press the call key) allows you to:

OPTION DESCRIPTION

1. Show all To display all the received mails.

2. Show

unread

To display the unread mails only.

3. Show read To display the read mails only.

4. Show

protect.

To display the protected mails only.

5. Delete one To delete the current (highlighted) mail.

6. Delete all To delete all the stored mails from the reception box.

The protected and unread mails cannot be deleted.

OPTION DESCRIPTION

1. Reply To reply to the current mail.

2. Reply

quoted

To reply and attach the text contents of the received mail.

3. Forward To forward the current mail.

4. Protect

on/off

To protect/unprotect the current mail (this feature allows you to protect the

mail from unauthorised deletion).

5. Copy

message

To forward the mail message by SMS.

6. Save

address

To store the sender’s address in the phonebook.

7. Save

phone #

To store the phone number and the mail address contained in the mail text

in the phonebook.

8. Save melody To store the attached melody in the Melodies file (see melody download,

page 45).

9. Delete To delete the current mail.

The items on this options list may vary according to the contents of the page displayed.

1 Select Sent mail or press .

2 Scroll to the required mail and select OK to view it.

OPTION DESCRIPTION

1. Re-edit To edit the sent mail and modify it if necessary.

2. Protect on/off To protect/unprotect the current mail (this feature allows you to protect the

mail from unauthorised deletion).

3. Copy

message

To forward the mail message by SMS.

4. Copy subject To forward the mail subject by SMS.

5. Save address To save the address contained in the message.

6. Save phone # To store the phone number and the mail address contained in the message

in the phonebook.

7. Delete To delete the current mail.

The availability of these options may vary according to the page contents type.

57-

i-mode

DRAFT

The mails you have stored (see composing an e-mail, page 54 and composing an mms, page 55)

are filed in the Draft folder.

To edit the stored mails:

Whilst in the Draft folder, selecting (press the call key) allows you to:

SELECTIVE RETRIEVAL

You can retrieve pending mails and MMS from the server:

CHECK NEW MAIL

This allows you to view new incoming mails and MMS.

MAIL SETTINGS

Please see the mail system settings section (below) for full details.

BACK

MAIL SYSTEM SETTINGS

This section explains how to personalize your messaging service when sending and receiving mail.

All of these settings are accessible from the Mail settings sub-menu.

or:

EDIT HEADER

This allows you to configure your mails so that text is added (once or each time mail is sent) at

the beginning of your message.

1 Select Draft or press .

2 Scroll to the required mail and select OK to view and edit it.

OPTION DESCRIPTION

1. Delete one To delete the selected mail.

2. Delete all To delete all the draft mails.

1 Select Selective retrieval or press .

2 The screen is divided into 2 parts (Select retrieval and Select delete): Select the Display

only title or Display detail in the required part then select Enter.

Select the message(s) to be retrieved or deleted according to its/their title or detailed contents.

The availability of this option depends on your service provider.

1 Select Check new mail or press .

2 The mobile connects to the network and plays any new mail(s) or MMS if any. Select OK to

view it/them.

Depending on your operator you may be allowed to select whether you want All, mails only or MMS only to be checked.

1 Select Back or press to come back to the i-mode main menu.

1 From the standby display, select Mail.

2 Select Mail settings or press .

1 From the standby screen select i-mode.

2 Select Mail or press .

3 Select Mail settings or press .

1 Select Edit header or press .

2 Select OK if you want to select Auto attach (to tick the corresponding box).

3 Scroll down to the header field (until the header field is highlighted) and select OK.

4 Enter your header text and select OK.

5 Scroll down until is highlighted and select OK to save the header.

1. The header is automatically added to all your mails if you tick Auto attach. If you do not tick Auto attach the header

is stored in the mobile (see composing an e-mail, page 54).

2. The header is not available on MMS edition mode.

58-

i-mode

EDIT SIGNATURE

This allows you to configure your mails so that text is added (once each time mail is sent) at the

end of your message.

REPLY MARKER

You can add text or symbols automatically to your message when you reply to mail received.

AUTO PLAY

When contained in a mail or MMS, you can choose whether or not a melody should play or an

image should be shown on opening mail.

AUTO RECEPTION

Your mails and/or MMS can automatically be received on your mobile. If this feature is not ac-

tivated, go to the server and check manually if you have received any mails or MMS (see check

new mail, page 57 ).

RECEIVE ATTACHMENT

When contained in a mail, you can choose whether or not an image and/or a MIDI file should

be downloaded to your mobile.

ATTACHMENT DATA

When contained in a message, you can choose whether or not, a melody file is recognised as

a valid file and should be played.

CHECKING THE SETTINGS

You can check the status of all your mail settings via this menu.

BACK

1 Select Edit signature or press .

2 Select OK if you want to select Auto attach (to tick the corresponding box).

3 Scroll down to the signature field (until the box is highlighted) and select OK.

4 Enter your signature text and select OK.

5 Scroll down until is highlighted and select OK to save the signature.

1. The signature is automatically added to all your mails if you tick Auto attach.

If you do not tick Auto attach, the header is stored in the mobile (see composing an e-mail, page 54).

2. The signature is not available on MMS edition mode.

1 Select Reply marker or press .

2 Press OK and enter the reply marker text or symbol(s). Press OK.

3 Scroll down until is highlighted and select OK to save the reply marker.

The > symbol is the default reply marker. It is automatically added to your reply mails.

1 Select Auto play or press .

1 Select iMail and/or MMS and press OK.

2 Scroll down as many times as necessary until is highlighted and press OK to validate.

1 Select Auto reception or press .

2 Select Yes and/or No.

3 Scroll down as many times as necessary until is highlighted and press OK to validate.

1 Select Receive attachment or press .

2 Select MIDI and/or image.

3 Scroll down as many times as necessary until is highlighted and press OK to validate.

1 Select Attachment data or press .

2 Select Valid or Invalid.

3 Scroll down as many times as necessary until is highlighted and press OK to validate.

1 Select Check settings or press to view the contents of each parameter.

1 Select Back or press to go back to the Mail main menu.

59-

i-mode

QUICK ACCESS TO i-mode BASIC FEATURES

This section shows you how to quickly access a few i-mode features.

TO CONNECT TO A NEW I-MODE SITE:

TO ACCESS A STORED ADDRESS:

TO BOOKMARK A PAGE:

TO GO TO A BOOKMARKED PAGE:

TO SAVE A WEBPAGE:

TO DISPLAY A SAVED PAGE:

TO DOWNLOAD A MELODY:

TO DOWNLOAD IMAGES AND PHONEBOOK PICTURES:

You can download images to be set as Main screen, Welcome screen, Goodbye screen or as

phonebook images (see setting an image as a main screen, a welcome screen or a goodbye

screen from the pictures folder, page 44 and welcome screen, page 62).

1 Select i-mode from the standby display.

2 Press

3 Press OK and enter the site address. Press OK.

4 Scroll down until is highlighted and select OK. The connection is then automatically activated.

1 Select i-mode from the standby display.

2 Press

3 Select the required address.

Scroll down until is highlighted and select OK. The connection is then automatically activated.

1 Whilst visiting a webpage, select (press the call key) to return to the options menu.

2 Select Add Bookmark.

3 Confirm your bookmark by selecting . The selected page URL address is now stored

in your Bookmarks list.

1 Select i-mode from the standby display.

2 Press .

3 Select the required bookmark and press OK. The connection is then automatically activated.

1 Whilst visiting a webpage, select (press the call key) to go to the options menu.

2 Select Save page.

3 Confirm your choice by selecting . The selected page is now stored in your Saved

pages list.

1 Select i-mode from the standby display.

2 Press .

3 Select the required page name and press OK.

1 Whilst visiting a webpage containing melodies, select one and press OK. The melody is then

downloaded to your mobile.

2 Once the download has been completed, play or store the melody (the melody is stored in

the Melodies list. See melody download, page 45).

The maximum size for i-mode downloadable melodies is operator dependent.

1 Whilst visiting a webpage containing an image, select (press the call key) to go to the options menu.

2 Select Save image and press OK. If several images are displayed on the page, use the left

and right arrow keys until the required image is highlighted and select OK.

3 Confirm your choice by selecting .

4 Press OK to validate the image name or delete and rename it (select OK to confirm).

The image is then stored in the Pictures list (see pictures, page 43).

1. You cannot send any of the images or melodies received via the i-mode via the infrared port, by mail or by MMS.

2. The maximum size for i-mode downloadable images is operator dependent.

60-

Settings

SETTINGS

his menu allows you to adjust the features on your mobile to your own

convenience and to ensure the security of the phone.

TONES

ALERT MODE

You can set the ring, alert and alarm tone types via the Mode menu.

To modify the alert mode:

RINGTONE SELECTION

You can select a melody from the available ring tones stored in the phone.

sIf you select the 'Vibrate' or 'Vibrate then ring' option, the vibrating option replaces all the alert and alarm tones.

1 Press OK. Select Settings.

2 Select Tones.

3 Select Mode.

4 Select one of the available settings (Ring, Silent, Vibrate, Vibrate & ring or Vibrate then

ring) and press OK to validate.

1. You can access the Mode menu directly from the standby display by pressing the up arrow key.

2. If the Alert mode is set to Silent, the icon is displayed on the standby screen.

3. If the Alert mode is set to Vibrate, Vibrate & ring or Vibrate then ring, the icon is displayed on the

standby screen.

4. When the phone is connected to either the Desk Top Charger, HF kit, CLA or AC adaptor, the vibrator

mode selection is temporarily inhibited and the phone rings instead of vibrating.

1 Press OK. Select Settings.

2 Select Tones.

3 Select Ringtones.

4 Select Incoming call, Incoming call L2, Alarm, Welcome melody (On switching on the

mobile, a welcome melody plays before the standby screen is displayed) or Goodbye melody

(on switching off the mobile, a Goodbye melody plays).

5 Scroll up or down to listen to the different ring tones. Select one by pressing OK.

6 Select Save to store your settings.

1- When scrolling up or down, wait for a few seconds for the selected melody to be played (except when on

Silent mode).

2- The ‘No sound’ item may be selected to deactivate the Welcome and Goodbye melodies.

61-

Settings

VOLUME ADJUSTMENTS

The ring tone, ramping, key tones, conversation and alarm tones (alarm

clock, diary alarm and low battery alarm) audio levels can all be individually

adjusted via the Settings menu:

During a call you can adjust the conversation volume level by using the up and down arrow

keys.

RAMPING

When activated, this feature gradually increases the incoming ringtone to the maximum volume

level if the call is not answered after the first ring.

DISPLAY

MAIN SCREEN

Themes can be changed to personalise your standby display.

To select a standby background image for your Main screen:

1 Press OK. Select Settings.

2 Select Tones .

3 Select Volume.

4 Select Ring, Ramping, Keys, Conversation or Alarm.

5 Scroll up or down to adjust the settings. You can also use the numeric keys to set the

required audio level: pressing sets the volume to 2, pressing or sets the volume to 6

or 7 pressing sets the volume to the minimum value (1 for speech and 0 for all others).

6 Press OK to validate the setting.

7 Select Save to store your setting.

1. If the ring tone volume level is set to 0, the icon is displayed on the standby screen.

2. Setting the key tones to 0 deactivates the key tones.

1 Press OK. Select Settings.

2 Select Tones.

3 Select Volume.

4 Select Ramping.

5 Select On.

6 Select Save to store your setting.

1 Press OK. Select Settings.

2 Select Display.

3 Select Main screen.

4 Select My picture or one of the five available background images.

4’ If My picture is selected, select Pictures (left softkey) and select one of the available

images (see pictures, page 43). If the image is too large, a Crop screen is displayed (see

cropping, page 44).

5 Select Save to store your setting.

1. The Urban theme changes twice a day: a night screen is set at 7 p.m. and a day screen at 7 a.m.

2. The Meridian theme displays the origin and the secondary clocks.

3.You can also set your Main screen image from the Pictures menu (see setting an image as a main screen, a

welcome screen or a goodbye screen from the pictures folder, page 44).

62-

Settings

WELCOME SCREEN

On switching on your mobile, a Welcome screen is displayed prior to the standby screen. This

screen is a default one but it can be customised by selecting any of the Pictures folder images

- see pictures, page 43.

GOODBYE SCREEN

On switching off your mobile, a Goodbye screen is displayed. This screen is a default one but

it can be customised by selecting any of the Pictures folder images - see pictures, page 43.

BACKLIGHT

To adjust the backlight for both the main and external screen:

EXTERNAL CONTRAST

To adjust the contrast of the external screen:

KEYPAD

KEYPAD LOCK

When the keypad lock is activated, this prevents the accidental operation of the keys. The key

tones are muted.

The keypad lock is suspended when an incoming call is received and resumed once the call is

over. Emergency calls (112) can however be made. If a key is pressed, a reminder message is

displayed.

To activate and deactivate the keypad lock:

1 Press OK. Select Settings.

2 Select Display.

3 Select Welcome screen.

4 Select Default or scroll down to My picture. Select Pictures (left soft key) to select one of

the stored images.

5 Select Save to store your setting.

You can also set the Welcome screen from the Pictures menu (see setting an image as a main screen, a wel-

come screen or a goodbye screen from the pictures folder, page 44).

1 Press OK. Select Settings.

2 Select Display.

3 Select Goodbye screen.

4 Select Default or scroll down to My picture. Select Pictures to select one of the stored

images.

5 Select Save to store your setting.

You can also set the Goodbye screen from My picture menu (see setting an image as a main screen, a welcome

screen or a goodbye screen from the pictures folder, page 44).

1 Press OK. Select Settings.

2 Select Display.

3 Select Backlight.

4 Adjust the backlight with the up or down arrow keys and select OK.

5 Select Save to store the setting.

1 Press OK. Select Settings.

2 Select Display.

3 Select Contrast (external).

4 Adjust the contrast with the up and down arrow keys and press OK.

5 Select Save to store the setting.

1 Press OK. Select Settings.

2 Select Keypad.

3 Select Keypad lock.

4 To unlock the keypad, press Unlock then .

63-

Settings

or:

ANY KEY ANSWER

This feature allows you to answer a call by pressing any key (except from the Off, No ring and

Side keys).

SPEED DIAL

Phonebook numbers can be assigned to keys to . The key cannot be assigned a

phonebook number as it is already assigned by default to the Voice Mail number (see calling

the voice mail centre to check your messages, page 64).

Numbers stored in both the SIM card and the phone (except fixed dialling numbers) can be

selected.

To assign phonebook numbers to the speed dialling keys:

VOICE MAIL

Your network provider may offer a Voice Mail service which operates like an answering ma-

chine. You may be able to access it directly by pressing and holding the .

Contact your service provider for further details.

STORING A VOICE MAIL CENTRE NUMBER

If your SIM card does not contain the Voice Mail centre number, you must store it manually:

ACTIVATING/DEACTIVATING THE VOICE MAIL ALERT TONE

If you wish to be advised by a tone when receiving a new Voice Mail message:

1 From the standby screen, press and hold to activate the keypad lock.

2 Press and hold to de-activate the keypad lock.

1 Press OK. Select Settings.

2 Select Keypad.

3 Select Any key answer and select On.

1 Press OK. Select Settings.

2 Select Keypad.

3 Select Speed Dial.

4 The Key number and the attached name (if any) are displayed. Select Names (or Options

then Names if a number has already been attached to the key) to select a name from the

names list.

5 Select OK to validate.

If a number which has been assigned to a speed dial key is deleted from the phonebook, the corresponding

number is automatically deleted from the speed dial key.

1 Press OK. Select Settings.

2 Select Voice Mail.

3 Select Number. Enter the number (either by keying it or selecting it from the Names list).

4 Press OK to validate.

1. The Voice Mail number is automatically assigned to speed dial location number 1 (see speed dial on page 63).

2. If you subscribe to the 'Line 2' service, an additional Voice Mail centre number must be stored separately.

The availability of this feature is operator dependent.

1 Press OK. Select Settings.

2 Select Voice Mail.

3 Select Alert. Select On.

64-

Settings

CALLING THE VOICE MAIL CENTRE TO CHECK YOUR MESSAGES

You can either:

-Dial the Voice Mail centre number directly after receiving a message:

- or:

PHONE SETTINGS

LANGUAGE SELECTION

You can change the language on your mobile:

AUTO FEATURES

AUTO-ANSWER

This feature is only operational when the phone is connected to a headset. The phone answers

the call automatically after about 5 seconds without the need to press a key.

AUTO-RETRY

This feature allows the phone to redial a number automatically if call has failed due to an en-

gaged line or an unavailable signal from the network. The number is re-dialled 10 times maxi-

mum until connection is established.

When activated, Retrying and a countdown timer are displayed prior to each new attempt. An

auto-retry warning tone beeps each time a new call attempt is made.

Selecting Exit or pressing any key during the retry process cancels the operation.

AUTO-SWITCH-ON/OFF

This feature allows the phone to switch on or off automatically at a pre-determined time.

If the phone is already on at automatic switch-on time, it remains on.

When the phone is about to automatically switch, off a warning message and a countdown timer

are displayed. Selecting Exit cancels the switch off process.

1 From the standby display, press and hold .

1 Press OK. Select Settings.

2 Select Voice Mail.

3 Select Call.

1 Press OK. Select Settings.

2 Select Phone settings.

3 Select Language.

4 Select a language from the list displayed and press OK to validate.

1 Press OK. Select Settings.

2 Select Phone settings.

3 Select Auto features.

4 Select Auto-answer and select On.

5 Select Save to store your setting.

1 Press OK. Select Settings.

2 Select Phone settings.

3 Select Auto features.

4 Select Auto-retry and select On.

5 Select Save to store your setting.

1 Press OK. Select Settings.

2 Select Phone settings.

3 Select Auto features.

4 Select Auto-switch-on or Auto-switch-off and select On to activate the feature.

5 Enter the time you want your mobile to switch on and/or to switch off and press OK.

6 Select Save to store your setting.

65-

Settings

If the mobile is already off at switch-off, it remains off.

ACTIVE FLIP

This feature allows you to answer/end a call automatically on opening/closing the mobile.

TIME & DATE

This feature allows you to set the mobile time according to the world time zone map, based on

Greenwich Mean Time (Origin clock). A Secondary clock is also available.

This feature is useful for the Diary. To import or export calendar cards, events and tasks, sched-

ules must be set according to Time zones.

Both clocks are displayed on the same screen. The date and time and the city name are dis-

played for both clocks.

CLOCK SETTING

To set the clocks:

CLOCKS SWAP

This feature is useful when travelling: the local clock is displayed but you can swap between

the origin clock and the secondary clock.

To swap clocks:

DEFAULT SETTINGS

You can reset your phone and return to your mobile default settings via the Settings menu.

This has no effect on the phonebook entries or the phone lock code.

If a call is in progress at switch-off time, the switch-off process is postponed until the call has ended.

Caution - Remember to turn off the Auto switch-on feature when boarding an aircraft.

See general safety, page 13.

1 Press OK. Select Settings.

2 Select Phone settings.

3 Select Auto features.

4 Select Active flip and select on to activate the feature.

1 Press OK. Select Settings.

2 Select Phone settings.

3 Select Time & date.

4 Select the Origin clock. Scroll through the panels and enter fill in the required information.

5 Select Save to store the data.

6 Select the Secondary clock. Scroll through the panels and enter the required information.

7 Select Save to store the data.

1 Press OK. Select Settings.

2 Select Phone settings.

3 Select Time & date.

4 Select Swap.

An information message is displayed. The secondary clock becomes the origin/mobile clock

and the origin clock becomes the secondary one.

1 Press OK. Select Settings.

2 Select Phone settings

3 Select Default settings.

4 Select Yes (Set default ?)

66-

Settings

The following features are reset:

GSM SERVICES

CALL DIVERTING

This Network dependent service allows you to divert incoming calls (voice, fax or data calls) to

another number

To divert a call:

To check the call divert status or deactivate it:

To cancel all call diverts,

FEATUREDEFAULT SETTING

Alert Modes Ring

Volumes, Ring, Key, Speech, Alarm Mid values

Backlight, Contrast Mid value

Any Key, Auto-Retry, Auto-Answer

features

Off

Active flip On

Ramping Off

1 Press OK. Select Settings.

2 Select GSM Services.

3 Select Call diverting. The following sub-menu is displayed (N.B.: the contents of this menu

may vary according to your service provider).

DIVERT OPTIONSACTION

Always To divert all incoming voice calls.

When not

reachable

To divert all voice calls when the phone cannot be reached (out of service).

On no reply To divert all voice calls when the call is not answered.

When busy To divert all voice calls when the line is engaged.

All conditions To divert all voice calls when Not Reachable, No Reply and When Busy.

Cancel all To cancel all diverting options.

All FAX calls To divert incoming fax calls unconditionally.

All DATA calls To divert incoming data calls unconditionally.

4 Select one of these options and select OK.

5 Select Activate.

6 Select Voice Mail (if you want the calls to be diverted to your voice mailbox), Names (select

one of the phonebook entries) or Number (Enter the number to which the calls are to be

diverted and select OK. A validation message containing the selected number is displayed).

1. If the 'On no reply' option is selected, please enter the time limit (5, 15 or 30 seconds; this also depends on

your network) after which the feature is valid.

2. Call diverting must to be set for both Line 1 and Line 2. Only the selected line is affected by the call divert.

1 Press OK. Select Settings.

2 Select GSM Services.

3 Select the call diverting type to be checked or cancelled.

4 Select Status or Cancel.

1 Press OK. Select Settings.

2 Select GSM Services.

3 Select Call diverting.

4 Select Cancel all.

1. This action cancels all call diverts (voice, faxes and data calls) for the current line.

2. To cancel call diverts for the other line, you must select this line first (menu Calls & Times - Line selection).

67-

Settings

CALL WAITING

This network dependent feature allows you to receive a new call while a call is already in

progress (network dependent). To activate the call waiting feature:

To put a call on hold and switch from Call 1 to Call 2:

SENDING MY ID

You can disable the sending of your own number on a call by call basis by adding #31# before

the number you are dialling. You can also ask your service operator to hide your mobile phone

number by default. Once hidden by your operator, you can show your number, on a call by call

basis, by entering *31# before the number you are calling.

Please contact your service provider for more information.

CALLER LINE IDENTITY - SHOWING/HIDING YOUR MOBILE NUMBER (NETWORK DEPENDENT)

Most networks have Caller Line Identity feature (CLI). This feature allows the phone number or

the identity of the caller to be displayed on incoming calls.

STANDARD NETWORK SETTING

To reset the standard network setting and send your mobile ID:

HIDING OR SHOWING YOUR NUMBER

VIEWING YOUR CURRENT ID STATUS

RECEIVING CALLER ID

You can check the availability of this feature on your network or subscription.

1 Press OK. Select Settings.

2 Select GSM Services.

3 Select Call waiting.

4 Select Activate. Activated or Check your request is then displayed.

You can also cancel or check the service status.

1 Whilst a call is in progress, a beep sounds to indicate a second incoming call.

Select Replace to take Call 2 and end Call 1, Select Reject to refuse Call 2 or press theCall/

Send key to put Call 1 on hold and take Call 2.

Press the End/Off key to end Call 1 and take Call 2.

2 Select Options then select Swap to get back to Call 1 and put Call 2 on hold or select Join

to have a 3 party conversation.

1 Press OK. Select Settings.

2 Select GSM Services.

3 Select Sending my ID.

4 Select My settings.

5 Select Preset. The phone resets and reverts to its original network setting.

1 Press OK. Select Settings.

2 Select GSM Services.

3 Select Sending my ID.

4 Select My settings.

5 Select Hide my ID or Show my ID.

1 Press OK. Select Settings.

2 Select GSM Services.

3 Select Sending my ID.

4 Select Status.

Your current ID status is displayed.

1 Press OK. Select Settings.

2 Select GSM Services.

3 Select Receiving caller ID.

The network then either returns Presentation available or Presentation unavailable infor-

mation.

68-

Settings

NETWORK AUTOMATIC SEARCH:

When the phone is on, it automatically searches the last network to which it was registered

(usually the home network). If it is not available, the phone automatically searches and selects

one of the networks registered in the preferred network list (located in the SIM card).

EDITING THE PREFERRED LIST

Your mobile contains a list of networks which can be selected (e.g.: to suit your travel arrange-

ments). You can also transfer items from this list to the preferred networks list.

The order and names of the networks in the preferred networks list can be edited and amended.

Your SIM card may contain a forbidden list of networks which cannot be used. To view this or

show your home network:

SELECTING MANUAL SEARCH

You may need to select a specific network (e.g. better coverage than your owns in the current

location).

SELECTING AUTOMATIC SEARCH

To perform an automatic search from the preferred list, proceed as follows:

1 Press OK. Select Settings.

2 Select GSM Services.

3 Select Network.

4 Select Preferred list. A list of networks is displayed.

5 Use the up and down arrows to view the list and select one of the following Options if you

want to amend the list:

OPTION DESCRIPTION

Modify by list To display the list of all networks stored in the phone.

Modify by code To edit or enter the identification operator number if you have the

information.

Delete To delete an entry

1 Press OK. Select Settings.

2 Select GSM Services.

3 Select Network.

4 Select either Forbidden to view the list of forbidden networks, or select Home network to

view the name of your usual network.

1 Press OK. Select Settings.

2 Select GSM Services.

3 Select Network.

4 Select Search.

5 Select Manual. The Scanning for networks... message is displayed.

6 Use the up or down arrow keys to select a network from the list.

7 Press OK to confirm your choice.

Requesting... after which the phone will return to the standby display.

1. You cannot select a network for manual change if it is on the forbidden list (even if it is still listed as a

choice).

2. You cannot delete a network from the forbidden list. This list is automatically updated when the manual net-

work selection is performed.

3. If the Manual search has been selected before turning the mobile off and if the manually selected network

cannot be found when the mobile is next turned on, you must select another network manually for your mobile

to lock on.

1 Press OK. Select Settings.

2 Select GSM Services.

3 Select Network.

4 Select Search.

5 Select Automatic.

69-

Settings

CALL BARRING

This network dependent service forbids certain outgoing or incoming call types. It requires a

call barring password.

To bar a call:

To remove call barring or check its status:

CALL BARRING PASSWORD

The call barring password is used to select the call barring levels. It is supplied via your service

provider.

To change the password:

OPERATION MODE

You can use your mobile as a modem on the GPRS network. When the modem mode is acti-

vated, you cannot send or receive a call.

1 Press OK. Select Settings.

2 Select GSM Services.

3 Select Call barring.

4 Select Outgoing calls or Incoming calls:

SELECTMEANING

Outgoing

All outgoing

To bar all outgoing calls.

Outgoing

Int'nal calls

To bar all outgoing international calls.

Outgoing

Int'nal excl.

home

To bar all outgoing international calls except from calls to subscribers

within your home network.

Incoming

All incoming

To bar all incoming calls.

Incoming

Roaming

only

To bar all incoming calls when not on the home network.

5 Select Activate. Enter the password and press OK.

The network then confirms the selection.

1 Press OK. Select Settings.

2 Select GSM Services.

3 Select Call barring.

4 Scroll up or down to select the barring type to be deactivated (Cancel) or checked and follow

the instructions displayed.

1 Press OK. Select Settings.

2 Select GSM Services.

3 Select Call barring.

4 Select Change password.

First enter the former password then enter the new password twice. A Confirmation message

is displayed.

1 Press OK. Select Settings.

2 Select GSM Services.

3 Select Operation mode.

4 Select Modem or Standard.

70-

Settings

SECURITY FEATURES

The security features described in this section protect your phone from unauthorised use.

When prompted, enter the code and press OK. Codes are displayed as asterisks(*).

Press Clear if you need to amend your entry.

KEEP A RECORD OF YOUR CODES IN A SAFE PLACE.

PHONE LOCK CODE

A phone lock code is supplied with the phone for security purposes. It prevents unauthorised

access to the phone.

The default code is 0000. We suggest that you change this code and keep the new one in a

safe place.

Once this feature is activated, the code is requested each time the phone is turned on.

To change the phone lock code:

To activate/deactivate the phone lock code:

PIN CODE

Your SIM card was provided with a 4 to 8 digit PIN code for protection against unauthorised

use. When enabled, the PIN code is required each time you turn your mobile on. If an incorrect

PIN code is entered three times in succession, your SIM card will be blocked. The 8 digit PUK

code is then require to unblock your phone. Please contact your service provider for this code.

To activate the PIN protection:

To change the PIN code (PIN must first be enabled):

PIN2 CODE

PIN2 code prevents unauthorised access to some of the mobile features (e.g. activating/deac-

tivating FDN operations, modifying the FDN phonebook, setting calls costs to zero, modifying

the costs display features). This code can be changed but not be activated or deactivated.

Please contact your service provider for your PIN2 code. To change the PIN2 code:

Avoid using codes similar to emergency numbers such as 112 to prevent the accidental dialling of these num-

bers.

1 Press OK. Select Settings.

2 Select Security.

3 Select Phone lock change and follow the instructions displayed.

4 Press OK to validate the new code.

1 Press OK. Select Settings.

2 Select Security.

3 Select Phone lock enable (if the code has been disabled) or Phone lock disable (if the

code has been enabled) and enter your Phone lock code.

Emergency calls can still be made when phone lock is activated.

1 Press OK. Select Settings.

2 Select Security.

3 Select PIN enable (if the code has been disabled) or PIN disable (if the code has been

enabled) and enter your PIN code.

1 Press OK. Select Settings.

3 Select Security.

3 Select PIN change and follow the information displayed.

4 Press OK to validate your new PIN code.

1 Press OK. Select Settings.

2 Select Security.

3 Select PIN2 change and follow the information displayed.

4 Press OK to validate your new PIN2 code.

71-

Settings

PUK CODE

The PUK (PIN unblock key) is an 8 digit code supplied by your service provider. It is used to

unblock the phone when an incorrect PIN code has been entered three times in succession. A

PUK code cannot be changed.

When prompted, enter the PUK code and select OK. You are then requested to enter a new PIN

code. Follow the prompts displayed to reset the PIN code.

PUK2 CODE

The PUK2 is an 8 digit code supplied by your service provider. It is used to unblock the phone

when an incorrect PIN2 code has been entered three times in succession. A PUK2 code cannot

be changed. When prompted, enter the PUK2 code.

SUMMARY OF CODE/PASSWORD ENTRY CHART

If you have entered an incorrect PUK code 10 times in succession your SIM card will be permanently blocked.

Contact your service provider for a new card.

If you have entered an incorrect PUK2 code 10 times in succession for use of the features requiring the PIN2

code, your mobile will be permanently blocked. Contact your service provider for a new card.

PASSWORD LENGTH NUMBER OF ATTEMPTS ALLOWEDIF BLOCKED OR FORGOTTEN

Phone lock code 4 digits Unlimited Return phone to manufacturer

PIN 4-8 digits 3Unblock with PUK code

PIN2 4-8 digits 3Unblock with PUK2

PUK 8 digits 10 Contact your service provider

PUK2 8 digits 10 Contact your service provider

Call barring

password 4 digits Defined by service provider Contact your service provider

i-mode lock code 4 digits Unlimited Return phone to manufacturer

72-

Appendix

APPENDIX

GLOSSARY

EXPRESSIONMEANING

AC/DC charger Alternating Current/Direct Current charger

Active call The call currently in progress

ALS Alternate Line (Line 2) Service

AoC Advise of Charge - subscription service

CB Cell Broadcast

CLI Caller Line Identity - displays caller’s telephone number

Conversation mode When the phone is making or receiving a call

DES Data Encryption Standard

Diverting Diverts incoming calls to the phone to another number

DTC Desk Top Charger

DTMF Dual Tone Multifrequency Tones

FDN Fixed Dialling Number

GSM Global System for Mobile communications

http HyperText Transfer Protocol

IN Information Numbers of your operator

IP Internet Protocol

LCD Liquid Crystal Display

MMI Man Machine Interface

MMS Multimedia Messaging Service

PIN/PIN2 Personal Identification Number. Supplied by your network/service provider

PPP Point to Point Protocol

PUK/PUK2 PIN Unblocking Key. Used to unlock PIN and PIN2. Supplied by your network/

service provider

QQVGA Quarter Quarter Video Graphics Array

Roaming (Rm) The ability to use your telephone on networks other than your home network.

SDN Service Dialling Number of your operator or service provider

SIM Subscriber Identity Module. Supplied by your network/service provider

SMS Short Message Service

SPN Service Provider Name

SR Status Report - relates to SMS messages

standby mode When the phone is on but not receiving/making a call or menu navigating.

URL Uniform Resource Locator

VGA Video Graphics Array

73-

Appendix

TROUBLE SHOOTING

PROBLEMPOSSIBLE CAUSE AND SOLUTION

Phone does not

switch on Check that the battery is fully charged and correctly connected to the phone.

No flashing battery

icon whilst

charging

There may be no mains supply. Try a different electrical socket.

The AC/DC charger may be faulty. Return to your dealer and try substitution with

another Mitsubishi Electric adaptor. If faulty, contact your dealer.

Short standby and

talk times Cell broadcast is permanently on, using more battery power.

Phone is in a poor signal area and therefore always on full power.

Incorrect charging and discharging. Always charge and discharge your battery

fully.

The battery is wearing out. Replace the battery.

Impossible to dial

numbers Keypad lock is on ( appears). Press Unlock and «#» to turn the keypad lock off.

Impossible to

make or receive a

call

Check that at least one signal strength bar ( ) is displayed. Try a stronger signal

strength area.

If no network name is displayed, check registration and area coverage with your

service/network provider and check that the SIM is correctly inserted.

Call barring option is on. Deactivate it (see page69). Call cost limit is reached

(see page 31).

Stored telephone

numbers cannot be

recalled

Fixed Dialled Number or Call Barring features are activated. Deactivate feature.

(see pages69).

The mobile is on

but nothing is

displayed.

Display contrast is too low. Reset contrast (see page 62).

Battery icon

not flashing 1-2-3-

4-5 during

charging

May indicate a charge or battery problem. Disconnect the charger. Reconnect and

try again.

May also indicate that the battery is fully recharged and does not require any

further charging.

symbol

displayed There is not enough memory to store another e-mail or another MMS. Delete one

or more of the existing stored messages.

Flashing There is not enough memory to store another SMS message. Delete one or more

of the existing stored messages.

74-

Appendix

ERROR MESSAGES

PROBLEMPOSSIBLE CAUSE AND SOLUTION

Allowed credit reached! You are trying to make a call and the allowed credit has already been

reached.

The allowed credit limit is reached during an outgoing call (the call is

then aborted).

Busy You are trying to make a call and the call fails because the destination

number is already engaged in conversation.

Call failed The user is unreachable.

The outgoing call fails due to:

the network cannot take the call due to system busy or

the number is out of order or

the number is unreachable or

the network does not answer or

the option to hide your phone number when calling is not supported by

the network

Control the ability to hide your ID when making a call (service availability

in network).

Cancelled. No type

selected

Cell broadcast activation has been requested but no message type has

been selected.

Cannot execute command You have made a request which is impossible to be executed in the

current call situation.

Cannot display message The short message text cannot be displayed (characters not

recognised, incorrect format etc.)

Check SIM! There is no SIM present or the SIM is incorrectly inserted.

Check your password You have changed the call barring password or

You have changed the call barring service status.

The password you have entered is incorrect.

Check your request You have requested a service that is impossible to fulfil.

Check your subscription You have tried to activate a GSM service. You are requested to check

your subscription regarding the related service rights of use/access.

Connection failed Connection with the server cannot be established for one of the

following reasons:

The server is busy. Try again later.

The server is down. Try again later.

The network is not reachable. Ensure that the GPRS service icon is

displayed on standby mode.

Error! The network cannot perform your request and generates an error result.

Failed An SMS sending process failed (the short message cannot be sent).

File too big The file dimensions (pixels) and/or weight (kB) are not appropiate for

your mobile. Resize the file (the maximum allowed file size depends on

your service provider).

File

protected

The file cannot be exported (copyright).

You cannot send any of the melodies or images received via the i-

mode.

Incorrect entry You have entered a character string with a syntax error.

Internal fault An unrecoverable error has occurred. Switch the handset off and back

on again.

Invalid data

received

The received file contains invalid information or the melody format

cannot be recognised by the mobile

Invalid number - You have tried to make a call and the call is rejected by the network

because the network does not recognise the phone number structure or

you have tried to store a phone number that is too long to be stored in

the selected location or

- you have tried to move a phone entry to a location that is unable to

receive the phone number (phone number too long).

Invalid

Service Menu

An invalid service menu has been sent to the handset. The invalid

service menu is ignored, no further action necessary.

75-

Appendix

PROBLEM POSSIBLE CAUSE AND SOLUTION

Menu limit reached A new service menu item has been received but the remaining storage

space is insufficient to store it. Delete one or more registered menu

items (My Services menu) and either accept or discard the new menu.

Message not sent The handset may be out of the network range or the network is

temporarily overloaded.

Network busy You have tried to make a call. The call is rejected by the network due to

congestion problems.

Network not allowed When selecting network manual search, you have selected a network

that rejects the connection.

New PIN2

incorrect. Try again

Changing PIN2: the new PIN2 code values differ (value control).

New PIN

incorrect. Try again

Changing PIN: the new PIN code values differ (value control).

No response You have made a call to a remote user and no response has been

received.

Not allowed Your number/character entry is not allowed.

Not allowed

(fixed

dialling)

A call has been attempted, but failed due to fixed dialling control (the

number dialled does not match any of the fixed dialling numbers in the

memory).

Number changed The called number has changed.

Page has no content Your request was accepted by the network but the required server page

is empty.

PIN blocked An incorrect PIN code has been entered 3 times.

PIN2 blocked An incorrect PIN2 code has been entered 3 times.

PUK2 blocked An incorrect PUK2 code has been entered 10 times.

The SIM services protected by the PIN2 code have now been

permanently disabled.

Reaching

allowed credit!

The cost limit is about to be reached. The connected call ends

automatically when the limit is reached.

Registration

required

You have not registered with any service. Go to the Service registration

menu.

Ring volume Off The ring volume is set to 0 (no volume)

Server limit reached A new service has been received but the remaining storage space is

insufficient to store it. Delete one or more registered service(s) -

Settings menu - and accept or discard the new service.

Service not available Activating some GSM services that are not available on the network

SIM blocked. Contact

provider

An incorrect PUK has been entered 10 times.

The SIM card has been permanently disabled and needs to be replaced

by a new one.

SIM blocked. Enter PUK: An incorrect PIN code has been entered 3 times.

Enter the PUK code to unblock the SIM card.

SIM fixed full

SIM names full

Phone names full

The corresponding memory is full.

Incorrect code. Try again An incorrect phone lock code has been entered.

Incorrect new code. Try

again

The new phone lock codes do not match (value control).

Incorrect PIN, try again

Incorrect PIN2, try again

Incorrect PUK, try again

Incorrect PUK2, try again

The incorrect code has been entered.

76-

Appendix

GUARANTEE

PAN EUROPEAN SERVICE

Should you experience any difficulty, please contact your nearest Mitsubishi Electric represent-

ative in the list below for information on service centres.

Important : to obtain the Mitsubishi Electric warranty service, the original purchase invoice from

the dealer is required.

PAN-EUROPEAN END-USER GUARANTEE CONDITIONS

1.Melco Mobile Communications Europe S.A. (MMCE) guarantees that for a period of twelve (12)

months from the date of purchase from the dealer, the product shall be free from defects in ma-

terials and workmanship. If the statutory warranty in force in your country exceeds 12 months,

the statutory warranty is not affected by this manufacturer’s guarantee. This guarantee also

covers batteries for a period of six (6) months from the date of purchase from the dealer. Sub-

ject to the conditions below, MMCE will indemnify you for the cost of all parts and labour for

repairs, or the replacement of the product or parts (which may include equipment of similar

type) where conducted by an approved Mitsubishi Electric service centre. MMCE shall be en-

titled to retain any product that has been replaced.

2.All claims must be made to an approved Mitsubishi Electric service centre. You can contact

the Mitsubishi Electric representatives listed above to obtain details of your nearest approved

Mitsubishi Electric service centre. As a condition of this guarantee, the date of the purchase must

be confirmed by producing the original invoice from the dealer. The final determination of guaran-

tee claim eligibility shall be made by MMCE.

3.This guarantee does not cover:

a)non-compliance with directions for use;

b)installation or removal charges where the product is installed in a vehicle;

c)defects or failures caused by accident, misuse, improper installation or improper repair by a non-

approved repairer, alteration or modification, neglect, failure to use the phone for normal purposes,

Acts of God, water ingress, use in adverse environmental conditions (humidity or temperature);

d)cost of or performance of any modifications to the product to adapt or adjust it to conform to

national or local safety laws, where such safety laws go beyond agreed European Union stand-

ards;

e)loss of use of the product or consequential loss of any nature;

f)loss of use of air-time, loss of use of any loaned equipment or ancillary equipment;

g)provision of incorrect or insufficient signal on air-time network, upgrading of product software

to changes in network operating parameters, main supply voltage fluctuations, incorrect SIM

card (memory card) parameters for connection to airtime retailer;

h)damage caused by non-Mitsubishi Electric accessories.

4.Any guarantee claim or service does not extend the original guarantee period unless so re-

quired by prevailing national law.

5.This guarantee is valid only if the product is purchased and used in the European Union, Nor-

way, Iceland or Switzerland.

THIS GUARANTEE DOES NOT AFFECT YOUR STATUTORY RIGHTS.

MELCO MOBILE COMMUNICATIONS EUROPE S.A.

5, rue de la Chataigneraie

35510 Cesson Sévigné

France

www.mitsubishi-telecom.com

UNITED KINGDOM

Tel: (0800) 912 00 20

BELGIUM

Tel: (0800) 75733

SPAIN

Tel: (902) 11 68 58

SWITZERLAND

Tel: 032 843 65 11

FRANCE

Tel: (0825) 86 82 83

AUSTRIA

Tel: (0800) 292716

ITALIA

Tel: (800) 79 10 29

FINLAND

Tel: (0800) 116 975

GERMANY

Tel: (01803) 33 71 84

PORTUGAL

Tel: (0800) 880 264

IRELAND

Tel: (1800) 92 70 12

SWEDEN

Tel: (0200) 214 715

THE NETHERLANDS

Tel: (0800) 0223825/ 072-5744160

77-

Index

INDEX

AC/DC adaptor charger ........... 14

Adjusting your picture ..............41

Alarm clock .............................. 20

Alert mode ................................ 60

Answering a call ......................... 7

Any key answer ........................ 63

Appendix .................................. 72

Auto Switch Off ........................ 64

Auto Switch On ........................ 64

Automatic search ..................... 68

Auto-Retry ................................64

Backlight .................................. 62

Balance information ................. 31

Battery

Disposal ................................ 15

Use ....................................... 14

Bookmarks ...............................51

Broadcast

Language ............................. 29

Message types ...............28, 29

Calculator .................................19

calendar ................................... 49

Call

Duration ................................31

Recorded .............................. 32

Reminder .............................. 31

Times .................................... 30

Call barring ............................... 69

Password .............................. 15

Call barring password

Call ....................................... 69

Call cost

Reset .................................... 32

Call hold ................................... 67

Call management

Call costs .............................. 31

Call timer

Reset .................................... 31

Call waiting ............................... 67

Caller line identity ..................... 67

Calls & Times ........................... 30

Call costs ........................ 31, 32

Call timers ....................... 30, 31

Calls log ................................30

Line selection ........................32

Camera .................................... 39

Adjusting your picture ........... 41

Brightness ............................. 41

Mobile positioning ................. 39

Zoom .................................... 41

Care and maintenance ............. 14

CB ............................................ 28

CB messages

Reading ................................ 28

Cell broadcast .......................... 28

Clamshell

Closed .............................. 4, 39

Open ....................................... 5

CLI ........................................... 67

Closed ..................................... 39

Closing the clamshell ................. 8

Credit limit ................................ 32

Cropping .................................. 44

Currency-converter .................. 19

Data exchange ........................ 47

Diary

Calendar ......................... 16, 17

Storage used ........................ 19

Tasks list .............................. 18

Display ................................. 8, 61

Downloaded melodies ............. 45

Downloading

Infrared port .......................... 44

Editing a phonebook card ........ 34

Editing a sim name card .......... 34

Editing a text model ................. 26

Ending a call .............................. 8

Entering text ............................ 24

Error messages ....................... 74

Export ...................................... 38

Fixed dialling numbers ............. 37

Fun & Media Box ..................... 43

Fun & Media box ..................... 43

Fun & Mediabox

Games & applications .......... 45

Others .................................. 47

Storage used ........................ 48

Games & applications .............. 45

General Safety ......................... 13

Glossary .................................. 72

GPRS .................................. 8, 11

Graphic display icons .............. 11

GSM Services

Call diverting ........................ 66

Network ................................ 68

Holding your phone ................... 8

Icons ........................................ 11

Image download ...................... 59

i-mode ...................................... 50

Bookmarks ........................... 51

Composing an e-mail ........... 54

Composing an MMS ............. 55

Inbox .................................... 55

Mail ....................................... 51

Menu .................................... 50

User interface ....................... 50

Information numbers ................ 49

Infrared port ............................. 20

Close .................................... 21

Open .................................... 21

Key ...........................................10

Keypad .....................................62

Keypad lock ..............................62

Line 1 ................30, 31, 32, 37, 66

Line 2 ..........30, 31, 32, 37, 63, 66

Mail ...........................................51

mail

Selective retrieval ..................57

Main screen and Welcome

screen animation ....................43

Making a call ..............................7

Melodies ...................................45

Download ..............................45

melodies ...................................45

Melody

Download ..............................59

Messages

Outbox ..................................27

Reception Alert .....................23

Settings .................................23

Storage used .........................28

Text models ..........................26

Write new ..............................26

Mobile number

Hiding ....................................67

Showing ................................67

Modem .....................................21

Multipress text entry .................24

Multitap .....................................25

Multitap text entry .....................24

My number ...............................37

My picture .................................62

Network ....................................68

Network serv. ...........................49

Outbox ......................................27

Phone, Settings ........................60

Phone lock ................................70

Code ...............................15, 70

Phone names card ...................33

Phone numbers

Storing ...................................33

Phonebook ...............................33

Add name ........................33, 34

Calling numbers ....................35

Deleting images ....................33

Export ....................................38

Fixed dialling .........................38

Free space ............................36

Group ....................................36

My numbers ..........................37

Read .....................................35

sim names card .....................34

Storage used .........................36

storing a received number ....34

Storing names .......................33

Storing phone numers ...........33

Viewing & calling ...................35

Voice dialling ...................35, 36

78-

Index

Phonebook card

Image ................................... 33

Picture size

Large .................................... 39

Normal .................................. 39

Portrait .................................. 39

Pictures

Album ................................... 43

Phonebook ........................... 59

Pictures browser ...................... 43

Pictures list .............................. 33

Preliminary ................................. 6

Preliminary operations ............... 6

Recorded call ........................... 32

Rejecting a call .......................... 7

Reminder - call duration .......... 31

Ring ......................................... 60

Ring tone ................................. 60

Safety information .................... 13

Disposing of waste

packaging ............................ 15

Emergency calls ................... 14

Security codes ...................... 15

Vehicle safety ....................... 13

Your responsibility ................ 15

SAR ......................................... 12

Security .................................... 70

Codes ................................... 15

Features ............................... 70

Setting an image

Goodbye screen ................... 44

Main screen .......................... 44

Welcome screen .................. 44

Settings

Any key answer .................... 63

Auto features .................. 64, 65

Broadcast ....................... 28, 29

Default settings .................... 65

Keypad ................................. 62

Main screen .......................... 61

My picture ............................. 62

Phone settings ..................... 64

Security ................................ 70

Time and date ...................... 65

Tones ............................. 60, 61

Voice Mail ....................... 63, 64

Welcome screen .................. 62

Show costs .............................. 32

Silent ....................................... 60

SMS

Forward ................................ 23

Move to SIM ......................... 22

Reading ................................ 22

Sending ................................ 26

Writing .................................. 24

SMS messages

Sending ................................ 26

Solutions ...................... 73, 74, 75

Speech note

record new ........................... 46

Speech notes .......................... 46

Speed dial ............................... 63

Standby display ......................... 8

Storage consumption ............... 28

Storage used ........................... 48

Storing names ......................... 33

T9 .............................................25

T9 text entry .............................25

Taking a picture ........................40

Text

Writing ...................................24

Text entry

Multipress mode ...................24

Multitap mode .......................24

T9 mode ................................25

Text model

Editing ...................................26

Tones .......................................60

Tools

Alarm clock ...........................20

Calculator ..............................19

Diary .....................................16

Turning the phone off .................9

user interface ...........................50

vCalendar

Sending .................................48

vCard

Sending .................................48

Storing ..................................47

Vehicle safety ...........................13

Vibrate ......................................60

& ring ....................................60

then ring ................................60

Viewing an image .....................43

Voice dialling

Creating a voice pattern ........35

Making a call .........................36

Voice Mail

Alert ......................................63

Call ........................................64

Number .................................63

Volume

Alarm ....................................61

Conversation .........................61

Key tones ..............................61

Ring ......................................61

Volume adjustments .................61

Webpage ..................................52

Welcome screen ......................43

79-

Index

80-

Index

MQ860P001B02

Mitsubishi M341I Operation Manual

M341i - Operations Manual M341i_EN Free User Guide for Mitsubishi Mobile Phone, Manual

Navigation menu

Versions of this User Manual:

Views

Navigation