Mitsumi Electric Co DWMW078 Wireless LAN module User Manual EXZR850 M29 e shinsei

Download:
Mirror Download [FCC.gov]
Document ID	2240670
Application ID	b0ypwQFREGxUxKppIWVKDg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	349.1kB (4363802 bits)
Date Submitted	2014-04-14 00:00:00
Date Available	2014-10-10 00:00:00
Creation Date	2014-02-03 18:29:36
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2014-03-25 12:17:35
Document Title	EXZR850_M29_e_shinsei.book
Document Creator	FrameMaker 7.1
Document Author:	CASIO COMPUTER CO., LTD.

EN
Digital Camera
User’s Guide
Thank you for purchasing this CASIO product.
• Before using it, be sure to read the precautions contained in this User’s Guide.
• Keep the User’s Guide in a safe place for future reference.
• For the most up-to-date information about this product, visit the official EXILIM
Website at http://www.exilim.com/
Accessories
As you unpack your camera, check to make sure that all accessories shown below
are included. If anything is missing, contact your original retailer.
USB-AC adaptor*1
(AD-C54UC/AD-C53U)
Rechargeable lithium ion
battery (NP-130A)
Power cord*2
Micro USB cable
Basic Reference
To attach the strap to the camera
Attach strap here.
Strap
*1 The type of USB-AC adaptor included varies according to the country or
geographic area where the camera is sold.
*2 A power cord is included with the AD-C53U USB-AC adapter. The shape of the
power cord plug varies according to the country or geographic area where the
camera is sold.
Read this first!
• The contents of this manual are subject to change without notice.
• The contents of this manual have been checked at each step of the production
process. Feel free to contact us if you notice anything that is questionable,
erroneous, etc.
• Any copying of the contents of this User’s Guide, either in part or its entirety, is
forbidden. Except for your own personal use, any other use of the contents of this
manual without the permission of CASIO COMPUTER CO., LTD. is forbidden
under copyright laws.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits suffered by you or any third party due to the use or malfunction of this
product.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits caused by loss of memory contents due to malfunction, repair, or any other
reason.
• Note that the example screens and product illustrations shown in this User’s Guide
may differ somewhat from the screens and configuration of the actual camera.
LCD Panel
The liquid crystal panel of the monitor screen uses high-precision technology that
provides a pixel yield in excess of 99.99%. This means that some very small number
of pixels may not light or may remain lit at all times. This is due to the characteristics
of the liquid crystal panel, and does not indicate malfunction.
Take test shots
Before shooting your final image, shoot a test shot to ensure that the camera is
recording correctly.
Contents
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
]\ General Guide
10
]\ Monitor Screen Contents and How to Change Them
12
]\ Quick Start Basics
16
What you can do with your CASIO camera . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
First, charge the battery prior to use.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
To load the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Charge the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Configuring Basic Settings the First Time You Turn On the Camera. . . . . . . . 23
Preparing a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Supported Memory Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
To load a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
To format (initialize) a new memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Turning the Camera On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Holding the Camera Correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
To shoot a snapshot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Selecting an Auto Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
To shoot a snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Deleting Snapshots and Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Snapshot Shooting Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
]\ Snapshot Tutorial
38
Selecting the Recording Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Control Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Self-timer) . .
Adjusting White Balance . . . . . . . . . . . . . . . . . . . . . . . . . . (White Balance) . .
Selecting a Focus Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Focus) . .
Specifying ISO Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (ISO) . .
Recording Beautiful Portraits . . . . . . . . . . . . . . . . . . . . . .(Make-up Level) . .
Correcting Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . (EV Shift) . .
Using Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Flash) . .
Specifying the Metering Mode . . . . . . . . . . . . . . . . . . . . . . . . . (Metering) . .
Shooting with Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
38
40
41
42
44
46
47
48
49
51
52
Monitor Screen Information when Zooming . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Zooming with Super Resolution . . . . . . . . . . . . . . . . . . . . . . . . (Zoom (SR)) . . . 55
Expanding the Zoom Range to Shoot Clearer Snapshots . (Multi SR Zoom) . . . 56
Shooting a Burst of Images . . . . . . . . . . . . . . . . . . . . . . (High Speed CS) . . 56
Contents
Shooting with Artistic Effects . . . . . . . . . . . . . . . . . . . . . . . . (ART SHOT) . . 60
Saving a Second Normal Image When
Shooting With HDR Art . . . . . . . . . . . . . . . . . . . . . . . . .(Double (HDR Art)) . . . 62
Shooting Multiple Images Over a Specified Period . . . . . . . (Interval Shot) . . 63
Shooting with Triple Shot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
]\ Recording Movies
66
To record a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Recording a High-definition Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recording a High Speed Movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Prerecord Movie . . . . . . . . . . . . . . . . . . . . . . . . (Prerecord (Movie)) . .
Recording a Time Lapse Movie . . . . . . . . . . . . . . . . . . . . . . (Time Lapse) . .
Shooting a Snapshot while Shooting a Movie . . . . . (Snapshot In Movie) . .
]\ Using BEST SHOT
69
69
71
73
75
77
To shoot with BEST SHOT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Creating and Using Your Own Setups . . . . . . . . . . . . . (CUSTOM SHOT) . .
Shooting with High Speed Anti Shake . . . . . . . . . . . . . . .(HS Anti Shake) . .
Shooting Bright Images in the Dark without Flash . . . . . . (HS Night Shot) . .
Digitally Correcting for Overexposure and Underexposure . . . . . . (HDR) . .
Shooting with a Blurred Background . . . . . . . . . . . (Blurred Background) . .
Shooting with Full Focus Macro . . . . . . . . . . . . . . . . (All-In-Focus Macro) . .
Using Continuous Shutter with Auto Focus . . . . . . . . . . . . . . . . . (AF-CS) . .
Shooting with Priority on Subject Faces . . . . . . . . . . . (HS Best Selection) . .
Shooting a Panorama Image . . . . . . . . . . . . . . . . . . . . .(Slide Panorama) . .
Shooting with a Super Wide Angle of View . . . . . . . . . . . . . . (Wide Shot) . .
Shooting Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Snapshot) . .
Shooting RAW Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Raw Image) . .
Using a TV Screen to Shoot Snapshots . . . . . . . . . . . . (HDMI TV Output) . .
]\ Advanced Settings
(REC MENU)
77
79
80
81
82
83
84
85
86
87
89
92
93
94
96
Configuring Recording Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Using a Smartphone as a Camera Remote Controller . (Remote Capture) . . 97
Triggering a Self-timer Operation with Motion . . . . . . . . .(Motion Shutter) . . 97
Repositioning the Motion Detection Area . . . . . . . . . . . . (Motion Position) . . 98
Assigning Functions to the Control Dial . . . . . . . . . . . . . . . . (Control Dial) . . 99
Assigning Functions to the [4] and [6] Keys . . . . . . . . . . . . . . . (L/R Key) . 100
Saving a Second Normal Image When
Shooting With HDR Art . . . . . . . . . . . . . . . . . . . . . . . (Double (HDR ART)) . 100
To select the snapshot image size . . . . . . . . . . . . . . . . . . . . (Image Size) . 101
Specifying Snapshot Image Quality . . . . . . . . . . . . . . . . . (Image Quality) . 103
Movie Image Quality Settings . . . . . . . . . . . . . . . . . . . . . . (Movie Quality) . 103
Specifying ISO Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (ISO) . 104
Contents
Specifying the ISO Sensitivity Upper Limit . . . . . . . . . . . . (ISO High Limit) . 105
Reducing the Effects of Camera and Subject Movement . . . .(Anti Shake) . 106
Zooming with Super Resolution . . . . . . . . . . . . . . . . . . . . . . .(Zoom (SR)) . 107
Turning Digital Zoom On or Off . . . . . . . . . . . . . . . . . . . . . . (Digital Zoom) . 107
Selecting a Focus Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Focus) . 107
Shooting with Face Detection . . . . . . . . . . . . . . . . . . . . . (Face Detection) . 108
Specifying the Auto Focus Area . . . . . . . . . . . . . . . . . . . . . . . . . (AF Area) . 109
Recording Beautiful Portraits . . . . . . . . . . . . . . . . . . . . . .(Make-up Level) . 110
Shooting with Continuous Auto Focus . . . . . . . . . . . . . . (Continuous AF) . 110
Optimizing Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . (Lighting) . 110
Reducing Wind Noise during Movie Recording . . . . . . . (Wind Noise Cut) . .111
Correcting Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . (EV Shift) . .111
Adjusting White Balance . . . . . . . . . . . . . . . . . . . . . . . . . . (White Balance) . .111
Using the Self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Self-timer) . .111
Specifying the Metering Mode . . . . . . . . . . . . . . . . . . . . . . . . . (Metering) . .111
Specifying Flash Intensity . . . . . . . . . . . . . . . . . . . . . . . . . (Flash Intensity) . 112
Controlling Image Sharpness . . . . . . . . . . . . . . . . . . . . . . . . . (Sharpness) . 112
Controlling Color Saturation . . . . . . . . . . . . . . . . . . . . . . . . . . (Saturation) . 112
Adjusting Image Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Contrast) . 112
Using the Auto Focus Assist Light . . . . . . . . . . . . . . . . . (AF Assist Light) . 113
Turning on Image Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Review) . 113
Using Icon Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Icon Help) . 114
Changing the Monitor Screen when Recording . . . . . . . . . (Shooting Info) . 114
Configuring Power On Default Settings . . . . . . . . . . . . . . . . . . . (Memory) . 116
]\ Viewing Snapshots and Movies
117
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing a Panorama Image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing Continuous Shutter Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
117
117
118
119
Deleting Continuous Shutter Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Dividing Up a Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Copying a Group Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Zooming an On-screen Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Displaying the Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Viewing Snapshots and Movies on a TV Screen . . . . . . . . . . . . . . . . . . . . . . 124
]\ Other Playback Functions
(PLAY MENU) 127
Assigning the Quick Send Function to
the [Õ] (Continuous Shutter) Button . . . . . . . . . . . . . . . . . . (Quick Send) . 127
Sending a Snapshot or Movie File from
Camera Memory to a Smartphone . . . . . . . . . . . . . . . . . .(Send to phone) . 127
Viewing Snapshots and Movies in
Camera Memory on a Smartphone . . . . . . . . . . . . . . . . (View on phone) . 127
Contents
Specifying the Control Dial Image Scroll Method . . . . . . . . . (Control Dial) . 128
Playing a Slideshow on the Camera . . . . . . . . . . . . . . . . . . . . (Slideshow) . 128
Transferring Music from Your Computer to Camera Memory . . . . . . . . . . . . . . 130
Using Snapshots to Create a Movie . . . . . . . . . . . . . . . . . . .(Make Movie) .
Editing a Movie on the Camera . . . . . . . . . . . . . . . . . . . . .(Movie Editing) .
To merge two movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Movie Merge) .
Creating a Snapshot of Movie Frames . . . . . . . . . . . . . (MOTION PRINT) .
Optimizing Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . (Lighting) .
Adjusting White Balance . . . . . . . . . . . . . . . . . . . . . . . . . . (White Balance) .
Adjusting the Brightness of an Existing Snapshot . . . . . . . . . (Brightness) .
Selecting Images for Printing . . . . . . . . . . . . . . . . . . . . . . (DPOF Printing) .
Protecting a File Against Deletion . . . . . . . . . . . . . . . . . . . . . . . . .(Protect) .
Editing the Date and Time of an Image . . . . . . . . . . . . . . . . . (Date/Time) .
Rotating an Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Rotation) .
Resizing a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Resize) .
Cropping a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Trimming) .
Copying Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Copy) .
Combining CS Images into a Single Still Image . . . . . . . . (CS Multi Print) .
Dividing Up a Continuous Shutter Group . . . . . . . . . . . . . . (Divide Group) .
Editing a CS Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Edit Group) .
]\ Establishing a Wireless LAN Connection
131
132
134
134
135
135
136
136
137
139
139
140
140
141
141
142
142
143
Wireless LAN Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Establishing a Connection between a Smartphone and Your Camera . . . . . 145
Installing the EXILIM Remote App on Your Smartphone . . . . . . . . . . . . . . . . . 145
Configuring Wireless LAN Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Using a Smartphone as a Camera Remote Controller . (Remote Capture) . 147
Sending the Currently Displayed Image to a Smartphone . . (Quick Send) . 149
To assign the Quick Send function to
the [Õ] (Continuous Shutter) button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
To send the displayed image to a smartphone . . . . . . . . . . . . . . . . . . . . . . . . . 150
Sending a Snapshot or Movie File from
Camera Memory to a Smartphone . . . . . . . . . . . . . . . . . .(Send to phone) . 151
Resizing Snapshots before Sending Them to
a Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Resize before send) . 153
Viewing Snapshots and Movies in
Camera Memory on a Smartphone . . . . . . . . . . . . . . . . (View on phone) . 154
]\ Printing
155
Printing Snapshots. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Using DPOF to Specify Images to be Printed and
the Number of Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . (DPOF Printing) . 155
Contents
]\ Using the Camera with a Computer
160
Things you can do using a computer... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Using the Camera with a Windows Computer . . . . . . . . . . . . . . . . . . . . . . . . 161
Viewing and Storing Images on a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Playing Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Using the Camera with a Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Connecting the Camera to Your Computer and Saving Files . . . . . . . . . . . . . . 165
Playing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Files and Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Memory Card Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
]\ Other Settings
(SETTING) 172
Enabling Power Saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (ECO Mode) .
Adjusting Monitor Screen Brightness . . . . . . . . . . . . . . . . . . . . . .(Screen) .
Resizing Snapshots before
Sending Them to a Smartphone . . . . . . . . . . . . . . . . (Resize before send) .
Configuring Camera Sound Settings . . . . . . . . . . . . . . . . . . . . . (Sounds) .
Creating an Image Storage Folder . . . . . . . . . . . . . . . . . . (Create Folder) .
Time Stamping Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . .(Timestamp) .
Auto Image Orientation Detection and Rotation . . . . . . . . . . (Auto Rotate) .
Specifying the File Name Serial Number Generation Rule . . . . . (File No.) .
Configuring Sleep State Settings . . . . . . . . . . . . . . . . . . . . . . . . . . (Sleep) .
Configuring Auto Power Off Settings . . . . . . . . . . . . . . . (Auto Power Off) .
Configuring [r] Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(REC) .
Configuring [p] Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (PLAY) .
Disabling File Deletion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Delete Key) .
Configuring World Time Settings . . . . . . . . . . . . . . . . . . . . . (World Time) .
Setting the Camera’s Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Adjust) .
Specifying the Date Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Date Style) .
Specifying the Display Language . . . . . . . . . . . . . . . . . . . . . . (Language) .
Selecting the HDMI Terminal Output Method . . . . . . . . . . . (HDMI Output) .
Changing the Camera Password for
Wireless LAN Connection . . . . . . . . . . . . . . . . . . . . . . . (WLAN password) .
Formatting Built-in Memory or a Memory Card . . . . . . . . . . . . . . .(Format) .
Resetting the Camera to Factory Defaults . . . . . . . . . . . . . . . . . . .(Reset) .
172
172
173
173
174
174
175
175
176
176
177
177
177
178
179
179
180
180
181
182
182
Contents
]\ Appendix
183
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Precautions During Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Battery Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Using the Camera in another Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Using a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
Reset Initial Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
When things don’t go right... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
Display Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
Number of Snapshots/Movie Recording Time . . . . . . . . . . . . . . . . . . . . . . . . 210
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
Contents
General Guide
The numbers in parentheses indicate the pages where each item is explained.
Front
Back
1234567
bl bm bn bo bp
bq
br
bk
1 Mode dial
9 8
(pages 30, 38, 66)
2 Zoom controller
(pages 31, 52, 123)
3 Shutter button
(pages 28, 30)
4 [Õ] (Continuous
Shutter) button (page 56)
5 [ON/OFF] (Power)
(pages 23, 28)
6 Flash (page 49)
7 Flash switch (page 49)
8 Front lamp
(pages 41, 113)
9 Lens
cm cl ck bt bs
bkMicrophones (page 67) bs[MENU] button
(pages 66, 96)
blBack lamp
(pages 20, 22, 28, 31,
bt[p] (PLAY) button
(pages 28, 34)
50)
bm[0] (Movie) button
ck[SET] button
bn[r] (REC) button
clControl dial
(page 66)
(page 28)
boStrap hole (page 2)
bpTerminal cover
bq[USB] port
(pages 19, 21)
(pages 40, 66, 96)
([8] [2] [4] [6])
(pages 11, 40, 66, 77,
96, 99)
cmMonitor screen
(pages 12, 30)
br[HDMI OUT]
HDMI output (micro)
(pages 94, 125)
10
General Guide
Bottom
cnBattery/memory card slots (pages 18, 26)
coBattery cover
cpSpeaker
cqTripod hole
Use this hole when attaching to a tripod.
cq cp
co cn
. Control Dial
In addition to using the up, down, left, and right buttons, you can also use the control
dial to perform operations.
• Depending on the function, certain operations cannot be performed using the
control dial.
Control dial
[8] [2] [4] [6] : Press the applicable button (up, down, left, right).
11
General Guide
Monitor Screen Contents and How to Change Them
The monitor screen uses various indicators, icons, and values to keep you informed
of the camera’s status.
• The sample screens in this section are intended to show you the locations of all the
indicators and figures that can appear on the monitor screen in various modes.
They do not represent screens that actually appear on the camera.
. Snapshot Recording (1 Shot)
cn
cm
cl
ck
bt
bs
br
1 2 34567
6Remaining snapshot memory capacity
bk
bl
bm
bn
bo
(page 210)
7Snapshot image size/Quality (pages 101, 103)
8Movie quality (FHD/STD movie)
(pages 66, 69)/
Recording speed (high speed movie) (page 69)
9Focal distance
(Converted to 35 mm film format.) (page 53)
bkAnti Shake (page 106)
bp
bq
blTimestamp indicator (page 174)
bmHistogram (page 114)
bnAF Area (page 109)
boDate/Time (pages 23, 179)
bpFocus frame (pages 31, 109)
bqBattery level indicator (page 23)
1 Self-timer mode (page 41)
brMetering mode (page 51)
2 Face Detection (page 108)
bsFlash (page 49)
3 Recording mode (page 30)
btExposure compensation (page 48)
4 Image deterioration indicator/ ckMake-up level (page 47)
Zoom (SR) indicator (page 54) clISO sensitivity (page 46)
5 Remaining movie memory
cmFocus mode (page 44)
capacity (page 66)
cnWhite balance (page 42)
NOTE
• Depending on recording settings, the aperture, shutter speed, and ISO sensitivity
values may not appear on the monitor screen. These values will be red if the Auto
Exposure (AE) is not correct for some reason.
12
Monitor Screen Contents and How to Change Them
. Snapshot Recording (Burst Shooting)
234
1Continuous Shutter (CS) speed (page 57)
2Recording mode (page 30)
3Remaining snapshot memory capacity
(page 210)
4Allowable CS time*/number of CS images
(page 57)
* It is not displayed while shooting with
Prerecord CS.
5Remaining movie memory capacity (page 211)
6Continuous Shutter mode (page 56)
7Prerecord CS shots (page 58)
8Maximum CS shots (page 57)
. Movie Recording
23 4 5
1Snapshot recording mode (Snapshot In Movie)
(page 75)
2Audio recording disabled (page 69)
3Recording mode (page 66)
4Movie recording time (page 66)
5Remaining movie memory capacity (page 66)
6Movie recording in progress (page 66)
7Movie quality (FHD/STD movie)
(pages 66, 69)/
Recording speed (high speed movie) (page 69)
8Remaining snapshot memory capacity
(page 210)
13
Monitor Screen Contents and How to Change Them
. Snapshot Viewing
6Recording mode (page 30)
7Histogram (page 114)
5 8Wireless LAN connection status
bs
(pages 151, 152)
br
9Date/time (page 179)
7 bkMetering mode (page 51)
bq
bp
White balance (page 135)
8 bl
bo
bmBattery level indicator (page 23)
bn
bnFlash (page 49)
bm blbk
boExposure compensation (page 48)
bpShutter speed
1 File type
2 Protect indicator (page 137) bqAperture value
brISO sensitivity (page 46)
3 Snapshot image size
(page 101)
bsFocal distance
(Converted to 35 mm film format.)
4 Folder name/file name
123 4
(page 169)
5 Snapshot image quality
(page 103)
. CS Image Viewing
12
1Number of images in the group (page 119)
2Group icon (page 119)
14
Monitor Screen Contents and How to Change Them
. Interval Shot Image Viewing
1Number of images in the group (page 119)
2Group icon (page 119)
3Interval Shot icon (page 119)
3 4Interval (page 119)
1 2
. Movie Playback
1No audio data available
2Movie recording time (page 117)
3 3Recording mode/Movie quality/speed
(pages 66, 69, 69)
4Interval* (page 119)
* Displayed for movie recorded with Time
Lapse.
. Configuring Monitor Screen Settings
Each press of [8] (DISP) will cycle through display settings that
display or hide on-screen information. You can configure separate
settings for the REC mode and PLAY mode.
[8] (DISP)
REC mode
Information on
Displays setting information.
Information off
Hides setting information.
PLAY mode
Information on
Displays settings when shooting, current date and time,
histogram (page 114), and other information.
Information off
No information displayed when shooting.
15
Monitor Screen Contents and How to Change Them
Quick Start Basics
What you can do with your CASIO camera
Your CASIO camera is packed with a powerful selection of features and functions to
make recording of digital images easier, including the following main functions.
Interval Shot
You can record a series of images over a specified
period. This function is useful when recording the
movement of stars, a blooming flower, etc.
*See page 63 for more information.
Time Lapse Movie
You can use this function to record movies of natural
events that occur over time, to speed up the flow of
traffic in a city scene, or to record other similar types of
movies.
*See page 73 for more information.
ART SHOT
A variety of artistic effects help to make even common,
ordinary subjects become more novel and exciting.
“ART SHOT” provides the following effects: HDR Art,
Toy Camera, Soft Focus, Light Tone, Pop, Sepia,
Monochrome, Miniature, Fisheye, Sparkling Shot,
Crystal ball.
*See page 60 for more information.
HS Night Shot
The camera shoots a series of images and then
merges them into a final image. The result is a bright
image, even if shot in the dark without a flash.
*See page 81 for more information.
Triple Shot
Pressing the shutter button shoots a burst of three
images and stores them in memory. This feature is
great for making sure you don’t miss those special
moments when kids are around.
*See page 65 for more information.
16
Quick Start Basics
Premium Auto Pro
Select Premium Auto Pro recording and the
camera automatically determines whether you
are shooting a subject or scenery, and other
conditions. Premium Auto Pro delivers higher
image quality than standard Auto.
*See page 30 for more information.
High Speed Movie
Movies can be recorded at up to 1000 frames per
second. This makes it possible to clearly view
phenomena that are invisible to the human eye, in
slow motion.
*See page 69 for more information.
Wireless LAN Connection
Turns your smartphone into a camera remote
controller and allows you to send images recorded with
your camera to your smartphone.
*See page 143 for more information.
17
Quick Start Basics
First, charge the battery prior to use.
Note that the battery of a newly purchased camera is not charged. Perform the steps
below to load the battery into the camera and charge it.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-130A)
for power. Never try to use any other type of battery.
To load the battery
1.
Open the battery cover.
2.
Load the battery.
Stopper
With the CASIO logo on the battery
facing downwards (in the direction
of the lens), hold the stopper next
to the battery in the direction
indicated by the arrow as you slide
the battery into the camera. Press
the battery in until the stopper
secures it in place.
OK
NG
Battery
CASIO logo
3.
Close the battery cover.
18
Quick Start Basics
To replace the battery
1.
Open the battery cover and
remove the current battery.
2.
Load a new battery.
Stopper
Charge the Battery
You can use either of the two following methods to charge the camera’s battery.
• USB-AC adaptor
• USB connection to a computer (Using the included micro USB cable.)
. To charge with the USB-AC adaptor
The adaptor lets you charge the battery while it is loaded in the camera.
While the camera is turned off, connect in the sequence shown below.
Charging time: Approximately 240 minutes
[USB] port
USB-AC adaptor
(AD-C54UC)
Micro USB cable
(included with camera)
u mark of the small (micro
USB) connector facing the lens
side of the camera.
USB-AC adaptor
(AD-C53U)
Power cord
• When disconnecting the USB-AC adaptor from the camera, be sure to disconnect
from the camera first.
19
Quick Start Basics
IMPORTANT!
• A battery that has not been used for a long time, or ambient temperature extremes
can cause charging to take longer than normal. If charging takes longer than about
five hours, a timer will terminate it automatically, even if the battery is not fully
charged. This is indicated by the back lamp flashing red. If the battery has not been
used for a very long time, charging may be terminated automatically and the back
lamp may start flashing red after only about 60 minutes. In either case, disconnect
the USB cable from the camera and then reconnect it to resume charging.
• Make sure that you insert the cable connector into the [USB] port until you feel it
click securely into place. Failure to insert the connector fully can result in poor
communication or malfunction.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
• Pressing [ON/OFF] (Power) while the USB-AC adaptor is
connected to the camera will turn on the camera with
power being supplied by the battery. Because of this,
charging will stop.
• The USB-AC adaptor will become warm during charging.
This is normal and does not indicate malfunction.
• The shape of the power plug depends on each country or geographic area.
Back Lamp Operation
Back lamp
Lamp Status
Description
Lit Red
Charging
Flashing Red
Abnormal ambient temperature,
USB-AC adaptor problem, or battery
problem (page 196)
Off
Charging complete
20
Quick Start Basics
. To charge using a USB connection to a computer
USB connection lets you charge the battery while it is loaded in the camera.
While the camera is turned off, connect in the sequence shown below (1, 2).
Computer
(power turned on)
[USB] port
USB port
Micro USB cable
(included with camera)
USB
u mark of the small (micro USB) connector facing the
lens side of the camera.
• If the camera is on, press [ON/OFF] (Power) to turn it off before connecting it to
your computer.
IMPORTANT!
• The first time you connect the camera to your computer with the USB cable, an
error message may appear on your computer. If this happens, disconnect and then
reconnect the USB cable.
• A battery that has not been used for a long time, certain types of computers, and
connection conditions can cause charging to take more than approximately five
hours, which will trigger a timer that terminates charging automatically, even if the
battery is not fully charged. If this happens, disconnect and then reconnect the
USB cable to restart charging. To complete charging faster, use of the included
USB-AC adaptor is recommended.
• If the battery has not been used for a very long time, charging may terminate
automatically and the back lamp may start flashing red or go out after only about
60 minutes. In either case, use of the USB-AC adaptor that comes with the camera
is recommended.
• If you turn on the camera while charging over a USB connection to a computer is in
progress, the camera will establish a USB connection with the computer. Though
charging normally should continue at this time, certain types of computers or
connection environments may stop charging if supply power is low. This will be
indicated by the camera’s back lamp lighting green.
• Charging is not performed while the connected computer is in the hibernate mode.
21
Quick Start Basics
Back Lamp Operation
Back lamp
Lamp Status
Description
Lit Red,
(Lit/Flashing Amber)
Charging
Flashing Red
Abnormal ambient temperature,
charging taking abnormally long, or
battery problem (page 196)
Off, (Lit Green)
Charging complete
• The information in parentheses in the above table shows the lamp status while the
camera is turned on during charging.
Other Charging Precautions
• With the two charging methods described above, you can charge the camera’s
battery (NP-130A) without removing it from the camera. You also can charge the
battery using an optionally available charger unit (BC-130L). Never use any other
type of charger device. Attempting to use a different charger can result in
unexpected accident.
• This model can be charged only via from USB 2.0 specification USB port only.
• USB charging devices and power supply devices are subject to fixed standards.
Use of an inferior device or a device that is not up to standard can cause
malfunction and/or failure of your camera.
• Operation is not guaranteed in the case of a computer built or modified by you.
Even in the case of a commercially available computer, certain USB port
specifications may make it impossible to charge via the USB cable.
• A battery that is still warm immediately after normal use may not charge fully. Give
the battery time to cool before charging it.
• A battery discharges slightly even when it is not loaded in the camera. Because of
this, it is recommended that you charge the battery immediately before you need to
use it.
• Charging the camera’s battery may cause interference with TV and radio reception.
If this happens, plug the USB-AC adaptor into an outlet that is further away from
the TV or radio.
• Actual charging time depends on current battery capacity and charging conditions.
• Do not use the USB-AC adaptor with any other device.
• Never use the power cord with another device.
• Use only the USB-AC adaptor and USB cable specified in this manual for charging.
Use of any other type of devices may result in improper charging.
22
Quick Start Basics
Checking Remaining Battery Power
As battery power is consumed, a battery indicator on the monitor screen indicates
remaining power as shown below.
Remaining Power
High
Battery Indicator
Indicator Color
Low
White
White
Red
Red
indicates battery power is low. Charge the battery as soon as possible.
Recording is not possible when
is indicated. Charge the battery immediately.
• The level shown by the battery indicator may change when you switch between the
REC mode and PLAY mode.
• Leaving the camera for about 30 days with no power supplied while the battery is
dead will cause its date and time settings to be cleared. A message telling you to
configure time and date settings will appear the next time you turn on the camera
after restoring power. When this happens, configure date and time settings (page
179).
• See page 215 for information about battery life and number of shots.
Battery Power Conservation Tips
• Entering the “ECO Mode” enables low-power operation (page 172).
• When you do not need to use the flash, select ? (Flash Off) for the flash setting
(page 49).
• Enable the Auto Power Off and the Sleep features to protect against wasting
battery power when you forget to turn off the camera (pages 176, 176).
• Select “Off” for “Continuous AF” (page 110).
Configuring Basic Settings the First Time You Turn On the
Camera
The first time you load a battery into the camera, a screen appears for configuring the
display language, date, and time settings. Failure to set the date and time correctly
will cause the wrong date and time data to be recorded with images.
IMPORTANT!
• A screen for language selection will not appear in step 2 of the procedure below if
you purchased a camera intended for the Japanese market. To change the display
language from Japanese in this case, use the procedure under “Specifying the
Display Language (Language)” (page 180). Note that a version of this manual in
the language you select may not be included with a camera intended for the
Japanese market.
• Camera models sold in certain geographic areas may not support display language
selection.
23
Quick Start Basics
1.
Press [ON/OFF] (Power) to turn on the
camera.
2.
Use [8], [2], [4], and [6] to select the
language you want and then press
[SET].
3.
Use [8] and [2] to select a date style and then press [SET].
[ON/OFF] (Power)
Example: July 10, 2015
YY/MM/DD * 15/7/10
DD/MM/YY * 10/7/15
MM/DD/YY * 7/10/15
4.
Set the date and the time.
Use [4] and [6] to select the setting you want to
change and then use [8] and [2] to change it.
To switch between 12-hour and 24-hour format, select
“24h” and then use [8] and [2] to change the setting.
5.
After setting the date and time, use [4] and [6]
to select “Apply” and then press [SET].
If you make a mistake configuring display language, date, or time settings with the
above procedure, refer to the following pages for information about how to correct
the settings.
– Display language: page 180
– Date and time: page 179
NOTE
• Each country controls its local time offset and the use of summer time, and so they
are subject to change.
• Removing the battery from the camera too soon after configuring time and date
settings for the first time can cause the settings to be reset to their factory defaults.
Do not remove the battery for at least 24 hours after configuring settings.
24
Quick Start Basics
Preparing a Memory Card
Though the camera has built-in memory that can be used to store images and
movies, you probably will want to purchase a commercially available memory card for
greater capacity. The camera does not come with a memory card. Images recorded
while a memory card is loaded are saved to the memory card. When no memory card
is loaded, images are saved to built-in memory.
• For information about memory card capacities, see page 210.
Supported Memory Cards
– SD Memory Card
– SDHC Memory Card
– SDXC Memory Card
Use one of the above types of memory card.
• The above are supported memory card types as of April 2014.
• This camera supports use of SD memory cards of the following types and
capacities: SD memory cards up to 2GB, SDHC memory cards from 2GB up to
32GB, SDXC memory cards from 32GB up to 2TB. Note that the ability to use any
particular card with this camera, even if it satisfies the above capacity and type
requirements, is not guaranteed.
. Memory Card Handling Precautions
Certain types of cards can slow down processing speeds, and even can make it
impossible to store High Quality movies correctly. Also, use of certain types of
memory cards slows down data transfer and increases the time it takes to record
movie data, which can result in movie frames being dropped. The Y indicator on the
monitor screen turns yellow to indicate that frames are being dropped. In order to
avoid problems such as these, use of an Ultra High Speed Type SD memory card is
recommended. Note, however that CASIO makes no guarantees about the operation
of any Ultra High Speed Type SD memory card used with this camera.
25
Quick Start Basics
To load a memory card
1.
Press [ON/OFF] (Power) to turn off
the camera and then open the
battery cover.
2.
Load a memory card.
Positioning the memory card so its front
is facing upwards (towards the monitor
screen side of the camera), slide it into
the card slot all the way in until you hear
it click securely into place.
Front
Front
3.
Back
Close the battery cover.
IMPORTANT!
• Never insert anything besides a supported memory card (page 25) into the memory
card slot.
• Should water or any foreign object ever get into the card slot, immediately turn off
the camera, remove the battery, and contact your retailer or nearest CASIO
authorized service center.
26
Quick Start Basics
To replace the memory card
Press the memory card and then release it.
This will cause it to pop out of the memory
card slot slightly. Pull the card out the rest
of the way and then insert another one.
• Never remove a card from the camera
while the back lamp is flashing green.
Doing so can cause the image save
operation to fail and even damage the
memory card.
To format (initialize) a new memory card
Format a memory card on the camera before using it for the first time.
IMPORTANT!
• Formatting a memory card that already has snapshots or other files on it, will delete
its contents. Normally you do not need to format a memory card again. However, if
storing to a card has slowed down or if you notice any other abnormality, re-format
the card.
• Be sure to use the camera to format a memory card. Formatting a card on a
computer will result in a non-SD standard format, which can greatly slow down
processing time and cause compatibility, performance, and other problems.
1.
Turn on the camera and press [MENU].
2.
Press [4], use [8] and [2] to select the “¥ SETTING” tab, and then
press [6].
3.
Use [8] and [2] to select “Format” and then press [SET].
4.
Use [8] and [2] to select “Format” and then press [SET].
5.
Use [8] and [2] to select “Yes” and then press [SET].
27
Quick Start Basics
Turning the Camera On and Off
. To turn power on
Pressing [ON/OFF] (Power) enters the REC mode so
you can record images. Pressing [p] (PLAY) while
in the REC mode enters the PLAY mode, which you
can use to view snapshots and movies (pages 34,
117).
• You also can turn on the camera by pressing [p]
(PLAY).
• Pressing [r] (REC) or the shutter button while in
the PLAY mode returns to the REC mode.
• Take care to ensure that nothing is restricting or
coming into contact with the lens as it extends.
Holding the lens with your hand so it cannot
extend creates the risk of malfunction.
• About 10 seconds after you press [p] (PLAY) to
enter the PLAY mode, the lens will retract into the
camera.
• The Sleep function (page 176) or Auto Power Off
(page 176) will turn off power automatically if you
do not perform any operation for a preset amount
of time.
[ON/OFF] (Power)
Shutter button
Back lamp
[p] (PLAY)
[r] (REC)
. To turn off the camera
Press [ON/OFF] (Power).
NOTE
• You also can configure the camera to turn on or off when you press [r] (REC)
(page 177).
• The camera can be configured so power turns off when [p] (PLAY) is pressed
(page 177).
28
Quick Start Basics
Holding the Camera Correctly
Your images will not come out
Horizontal
Vertical
clearly if you move the camera
when you press the shutter
button. When pressing the
shutter button, be sure to hold
the camera as shown in the
illustration, and keep it still by
pressing your arms firmly
against your sides as you shoot.
Holding the camera still,
Hold the camera so the flash is above the lens.
carefully press the shutter button
and take care to avoid all
movement as the shutter
releases and for a few moments after it releases. This is especially important when
available lighting is low, which slows down the shutter speed.
NOTE
• Take care that your fingers and the strap do not
Flash
cover any of the areas indicated in the illustration.
Front lamp
• To protect against accidentally dropping the
camera, attach the wrist strap and make sure it is
around your fingers or wrist while you are
operating the camera.
• Never swing the camera around by its strap.
• The supplied strap is intended for use with this
camera only. Never use it for any other purpose.
• Shooting an image while the camera’s “Auto
Lens
Rotate” setting is “On” will cause the playback
image to be rotated automatically to the orientation
the camera was in when the image was recorded (page 175).
29
Quick Start Basics
To shoot a snapshot
Selecting an Auto Recording Mode
You can select one of two auto recording modes (Program Auto or Premium Auto
Pro) according to your digital imaging needs.
Setting
P Program
Auto
Ÿ Premium
Auto Pro
1.
REC Screen
Icon Display
Description
This is the standard Auto recording mode.
With Premium Auto Pro recording, the camera
automatically determines whether you are shooting a
subject or scenery, and other conditions. Premium
Auto Pro recording delivers higher image quality than
Program Auto recording.
• Some of the settings configured automatically by
Premium Auto Pro cannot be changed by you.
• It also requires more power (and runs down the
battery quicker) than Program Auto.
Press [ON/OFF] (Power) to turn on the camera.
The camera will enter the REC mode.
• If the camera is in the PLAY mode, press [r] (REC) or the shutter button.
2.
Align the mode dial with [P] (Program Auto) or [Ÿ] (Premium Auto
Pro) to select Auto recording mode.
Remaining Snapshot Memory
Capacity (page 210)
Monitor screen
[ON/OFF] (Power)
Shutter button
Mode dial
Auto recording mode icon
[r] (REC)
30
Quick Start Basics
To shoot a snapshot
1.
Point the camera at the subject.
• If you are shooting with Premium Auto Pro, text will
appear at the bottom of the monitor screen describing
the type of shot the camera has detected.
• You can zoom the image, if you want.
Appears when the
camera detects it is
stationary on a tripod.
Zoom controller
w Wide Angle
z Telephoto
If the camera decides that it needs to shoot a series of images with Continuous Shutter
(CS), it will display “Š”. Take care to avoid any camera and subject movement until
shooting of all of the CS images is complete.
2.
Half-press the shutter button to
focus the image.
Back lamp
When focus is complete, the camera
will beep, the back lamp will light
green, and the focus frame will turn
green.
Focus frame
Half-press
Press lightly
until the
button stops.
When you half-press the shutter button, the
camera automatically adjusts exposure and
focuses on the subject it is currently pointed at.
Mastering how much pressure is required for a
half-press and a full-press of the shutter button
is an important technique for good-looking
images.
Beep, beep (Image is in focus.)
31
Quick Start Basics
3.
Continuing to keep the camera still,
press the shutter button the rest of
the way down.
Full-press
This records the snapshot.
Snap (Image is recorded.)
Recording a Movie
[0] (Movie)
Press [0] (Movie) to start movie recording. Press
[0] (Movie) again to stop movie recording. See the
following pages for details.
Standard movie (STD movie): page 66
High-definition movie (FHD movie): page 69
High speed movie (HS movie): page 69
. If the image does not focus...
If the focus frame stays red and the back lamp is flashing green, it means that the
image is not in focus (because the subject is too close, etc.). Re-point the camera at
the subject and try to focus again.
. Shooting with Auto
If the subject is not in the center of the frame...
“Focus lock” (page 45) is the name of a technique you can use when you want to
shoot an image in which the subject to be focused on is not within the focus frame in
the center of the screen.
To track the movement of a moving subject
Half-press the shutter button to follow and focus automatically on a moving subject.
See “O Tracking” (page 109) for more information.
32
Quick Start Basics
. Shooting with Premium Auto Pro
• Some menu items are not available while Premium Auto Pro is in use (page 96).
Only the menu items whose settings can be configured will be displayed on the
menus while Premium Auto Pro is in use.
• In addition to shutter speed, aperture, and ISO sensitivity, the camera
automatically executes the following operation as required when shooting with
Premium Auto Pro.
– Continuous AF (page 110)
– Face Detection (page 108)
– HS Scene Shooting (page 33)
• Shooting with Premium Auto Pro can cause vibration and noise to occur due to
lens operation. This does not indicate malfunction.
• When Shooting with Premium Auto Pro, the message “Processing Premium Auto.”
may appear on the monitor screen. If you feel the camera is taking too long to
process data, try shooting with standard Auto instead.
• In some cases, Premium Auto Pro may not be able to interpret the shooting
environment correctly. If this happens, shoot with standard Auto.
• If “Š” is displayed, the camera will shoot a series of CS images and merge them
into a final image. Take care to avoid any camera and subject movement until
shooting of all of the CS images is complete. If you do not want to shoot CS
images, select “Off” for the Control Panel (page 40) “HS Scene Shooting” item.
• Certain flash settings (page 49) can limit environmental factors detectable by
Premium Auto Pro.
33
Quick Start Basics
Viewing Snapshots
Use the following procedure to view snapshots on the camera’s monitor screen.
• For information about how to play back movies, see page 117.
• For information about images recorded using continuous shutter (CS), see page
119.
1.
Turn on the camera and press
[p] (PLAY) to enter the PLAY
mode.
• This will display one of the snapshots
currently stored in memory.
• Information about the displayed
snapshot also is included (page 14).
[p] (PLAY)
• You also can clear the information to
view only the snapshot (page 15).
• You can zoom in on the image by rotating the zoom controller towards z
(page 123). If you are recording a snapshot that is very important to you, it is
recommended that you zoom the image and check its details after recording it.
2.
Use [4] and [6] to scroll between images.
• Holding down either button scrolls at high speed.
[6]
[6]
[4]
[4]
NOTE
• Half-pressing the shutter button while in the PLAY mode or while a menu screen is
displayed will switch directly to the REC mode.
34
Quick Start Basics
Deleting Snapshots and Movies
If memory becomes full, you can delete snapshots and movies you no longer need in
order to free up storage and record more images.
IMPORTANT!
• Remember that a file (image) delete operation cannot be undone.
• For information about images recorded using continuous shutter (CS), see page
120.
• If you select “Disabled” for the “Delete Key” setting on the “¥ SETTING” menu
(page 177), the delete menu will not appear when you press [2] (
) (Delete).
You can delete files only while “Enabled” is selected for “Delete Key”.
. To delete a single file
1.
Press [p] (PLAY) to enter the PLAY mode and then
press [2] (
).
2.
Use [4] and [6] to scroll through the files until the one
you want to delete is displayed.
3.
Use [8] and [2] to select “Delete” and then press [SET].
• To delete other files, repeat steps 2 and 3.
• To exit the delete operation, press [MENU].
• If a CS group (page 119) or interval shot group (page 119) is displayed when
you perform the above procedure, all of the images in the currently displayed
group will be deleted.
. To delete specific files
1.
Press [p] (PLAY) to enter the PLAY mode and then press [2] (
2.
Use [8] and [2] to select “Delete Files” and then press [SET].
).
• This displays a file selection screen.
3.
Use [8], [2], [4], and [6] to move the selection boundary to the file
you want to delete, and then press [SET].
• This will select the check box in the lower left corner of the selected file’s image
and move the blue boundary to the next image.
• You can enlarge the selected image before deleting it by rotating the zoom
controller towards z ([).
4.
Repeat step 3 to select other files, if you want. After you are finished
selecting files, press [MENU].
35
Quick Start Basics
5.
Use [8] and [2] to select “Yes” and then press [SET].
• This deletes the files you selected.
• To cancel the delete operation, select “No” in step 5 and then press [SET].
. To delete all files
1.
Press [p] (PLAY) to enter the PLAY mode and then press [2] (
2.
Use [8] and [2] to select “Delete All Files” and then press [SET].
3.
Use [8] and [2] to select “Yes” and then press [SET] to delete all files.
).
This will cause the message “There are no files.” to appear.
Snapshot Shooting Precautions
Operation
• Never open the battery cover while the back lamp is flashing green. Doing so can
result in the image you just shot being saved incorrectly, damage to other images
stored in memory, malfunction of the camera, etc.
• If unwanted light is shining onto the lens, shade the lens with your hand when
shooting an image.
Monitor Screen when Shooting Snapshots
• Subject brightness conditions can cause monitor screen response to slow and can
cause digital noise in the monitor screen image.
• The image that appears on the monitor screen is for image composition. The actual
image will be recorded at the quality set for the image quality setting (page 103).
Shooting Indoors under Fluorescent Lighting
• Minute flickering of fluorescent lighting can affect the brightness or color of an
image.
Other Precautions
• The slower the shutter speed, the greater the possibility that noticeable noise will
be generated in an image. Because of this, the camera automatically performs a
noise reduction at slow shutter speeds. The noise reduction process causes it to
take longer to record images at lower shutter speeds. The shutter speeds for which
noise reduction is performed depend on the camera setup and shooting conditions.
• A noise reduction process is performed when ISO sensitivity is set to a high value.
This can cause the camera to take relatively longer to be ready to shoot again after
you press the shutter button. Do not perform any key operation while the image
recording operation is in progress.
• Due to the characteristics of the imaging element used by the camera, very fast
moving objects in an image may appear distorted.
36
Quick Start Basics
. Auto Focus Restrictions
• Any of the following can make proper focus impossible.
– Solid color wall or other very low contrast subject
– Strongly back lit subject
– Very shiny subject
– Blinds or other subject with a repeating horizontal pattern
– Multiple subjects at varying distances from the camera
– Subject in a dark location
– Subject that is too far away for light from the AF assist light to reach
– Camera movement while shooting
– Fast-moving subject
– Subjects outside the focus range of the camera
• If you cannot focus properly, try using focus lock (page 45) or Manual Focus (page
44).
37
Quick Start Basics
Snapshot Tutorial
Selecting the Recording Mode
Your camera has a variety of different recording
modes. Before recording an image, rotate the mode
dial to select the recording mode that suits the type
of image you are trying to record.
Mode dial
P Program Auto
Standard Auto recording mode. This is the mode you normally should use
(page 30).
Ÿ Premium Auto Pro
With Premium Auto Pro recording, the camera automatically determines
whether you are shooting a subject or scenery, and other conditions. Premium
Auto Pro recording delivers higher image quality than standard Auto recording
(page 30).
b BEST SHOT
Simply select one of a collection of built-in sample scenes and the camera sets
up automatically for beautiful images every time (page 77).
C ART SHOT
A variety of artistic effects help to make even common, ordinary subjects
become more novel and exciting (page 60).
j Multi SR Zoom
This feature uses super resolution technology and multiple Continuous Shutter
(CS) images to expand the zoom range for overall images of higher quality and
clarity (page 56).
F Time Lapse / Interval Shot
You can use this function to record a movie that speeds up a sequence of
changes in natural phenomena or the flow of traffic in a city scene (page 73), or
to record a series of snapshots over time (page 73).
D Triple Shot
Shoots a burst of three images, making this feature is great for capturing all
those special moments when kids are around (page 65).
38
Snapshot Tutorial
M M (Manual Exposure) mode
This mode gives you total control over aperture and shutter speed settings.
1 Press [SET] to open the Control Panel.
2 Use [8] and [2] to select A (Aperture), and then press [SET].
3 Use [8] and [2] to change the aperture setting, and then press [4].
4 Use [8] and [2] to select S (Shutter Speed), and then press [SET].
5 Use [8] and [2] to change the shutter speed setting, and then press [SET].
S S (Shutter Speed AE) mode
In this mode, you select the shutter speed and other settings are adjusted
accordingly.
1 Press [SET] to open the Control Panel.
2 Use [8] and [2] to select S (Shutter Speed), and then press [SET].
3 Use [8] and [2] to change the shutter speed setting, and then press [SET].
• You also can select the EV shift setting located under the shutter speed
setting and then specify an exposure value (EV shift), if you want.
A A (Aperture Priority) mode
In this mode, you select the aperture and other settings are adjusted
accordingly.
1 Press [SET] to open the Control Panel.
2 Use [8] and [2] to select A (Aperture), and then press [SET].
3 Use [8] and [2] to change the aperture setting, and then press [SET].
• You also can select the EV shift setting located under the aperture setting
and then specify an exposure value (EV shift), if you want.
IMPORTANT!
• In the S mode, ISO sensitivity (page 46) always operates according to its “Auto”
setting. The ISO sensitivity setting cannot be changed while in the S mode.
• The flash > (Auto Flash) and ¥ (Red Eye Reduction) flash modes are not
supported while A, S, or M is selected for the recording mode. If you want the flash
to fire, select < (Flash On) as the flash mode.
• The displayed ISO sensitivity, shutter speed or aperture value will turn red when
you half-press the shutter button if the image is overexposed or underexposed.
39
Snapshot Tutorial
Using the Control Panel
The Control Panel can be used to configure camera
settings.
1.
[8] [2] [4] [6]
In the REC mode, press [SET].
[SET]
• You can also display the Control Panel by
pressing [2].
2.
Use [8] and [2] to select the setting you want to change, and then
press [SET].
This will select one of the Control Panel icons and display its settings.*
1Self-timer (page 41)
2White balance (page 42)
3Focus (page 44)
4ISO sensitivity (page 46)
5Make-up Level (page 47)
6EV shift (page 48)
7Flash (page 49)
8Metering (page 51)
Control Panel
* Items displayed in the Control Panel depend on the recording mode.
3.
Use [8] and [2] to change the setting.
4.
After the setting is the way you want, press
[SET].
This will apply the setting and return to the REC
mode.
NOTE
• You also can use on-screen menus to configure settings other than those listed
above (page 96).
40
Snapshot Tutorial
Using the Self-timer (Self-timer)
With the Self-timer, pressing the shutter button starts a timer. The shutter is released
and the image is shot after a fixed amount of time.
1.
In the REC mode, press [SET].
2.
Use [8] and [2] to select the
then press [SET].
3.
Use [8] and [2] to select the setting you want and then press [SET].
Setting
REC Screen
Icon Display
(Self-timer) Control Panel option, and
Description
„ 10 sec
10-second Self-timer
‚ 2 sec
2-second Self-timer
• When shooting under conditions that slow
down the shutter speed, you can use this
setting to prevent image blur due to camera
movement.
Shoots three images: one image 10 seconds
after the shutter button is pressed, and the next
two images as soon as the camera is ready
after shooting the previous image. How long it
takes for the camera to get ready to shoot
depends on the image size and quality settings,
whether or not a memory card is loaded in the
camera, and the flash charge condition.
” ×3
(Triple Selftimer)
• Off
None
Turns off the Self-timer.
• The front lamp flashes while the Self-timer countdown is
in progress.
• You can interrupt an ongoing Self-timer countdown by
pressing [SET].
41
Front lamp
Snapshot Tutorial
NOTE
• The Self-timer cannot be used together with the following features.
High Speed CS with Prerecord CS, Prerecord (Movie), Slide Panorama,
Wide Shot, Triple Shot
• The Triple Self-timer cannot be used together with the following features.
Movie, Time Lapse, High Speed CS, Multi SR Zoom, HS Night Shot, HS Best
Selection, Blurred Background, All-In-Focus Macro, Interval Shot
• The Motion Shutter (page 97) can be used only while the Control Panel’s self-timer
setting is “Off”. For any other self-timer setting, the applicable self-timer operation
is performed.
Adjusting White Balance (White Balance)
You can adjust white balance to match the source of light available where you are
shooting and avoid the blue cast that results when shooting outdoors when it is
cloudy, and the green cast that results when shooting under fluorescent lighting.
1.
In the REC mode, press [SET].
2.
Use [8] and [2] to select the
and then press [SET].
3.
Use [8] and [2] to select the shooting condition you want and then
press [SET].
Setting
‡ Auto WB
(White Balance) Control Panel option,
REC Screen
Description
Icon Display
None
Configures the camera to adjust white balance
automatically.
¤ Daylight
For shooting outdoors on a clear day
' Overcast
For shooting outdoors on an overcast rainy day,
in the shade, etc.
“ Shade
For shooting on a clear day in the shade of trees
or buildings
† DayWhite
Fluor
– Daylight
Fluor
« Tungsten
For shooting under white or day white
fluorescent lighting
For shooting under daylight fluorescent lighting
For shooting under light bulb lighting
42
Snapshot Tutorial
Setting
· Manual
WB
REC Screen
Description
Icon Display
For configuring the camera manually to suit a
particular light source
Blank white paper
1 Select “Manual WB”.
2 Under the lighting
conditions you plan to
use when shooting, point
the camera at a blank
white piece of paper so it
fills the entire monitor
screen and then press
the shutter button.
3 Press [SET].
The white balance setting is retained even if you
turn off the camera.
• When “‡ Auto WB” is selected for the white balance setting, the camera
automatically determines the white point of the subject. Certain subject colors
and light source conditions can cause problems when the camera tries to
determine the white point, which makes proper white balance adjustment
impossible. If this happens, select the white balance setting that matches your
shooting conditions (Daylight, Overcast, etc.).
43
Snapshot Tutorial
Selecting a Focus Mode (Focus)
• Auto Focus is the only focus mode available while Make-up (page 47) or Face
Detection (page 108) is enabled. To select another focus mode, first turn off Makeup and Face Detection.
1.
In the REC mode, press [SET].
2.
Use [8] and [2] to select the
then press [SET].
3.
Use [8] and [2] to select the setting you want and then press [SET].
Settings
Q AF
(Auto
Focus)
REC Screen
Icon Display
None
Type of Shot
(Focus) Control Panel option, and
Focus Mode
Snapshot
Movies
General
recording
Close ups
W MF
(Manual
Focus)
When you
want to focus
manually
Snapshot
Movies
4 cm to 9 (infinity)
(1.6" to 9) (Wide Angle)*2
Automatic Automatic*3
´
Macro
Approximate Focus Range*1
Manual
4 cm to 50 cm
(1.6" to 19.7")
(Wide Angle)*2
4 cm to 9 (infinity)
(1.6" to 9) (Wide Angle)*2
*1 The focus range is the distance from the lens surface.
*2 The focus range depends on the current optical zoom position.
*3 During High Speed Movie recording, focus is fixed at the position where it was
when recording started. To focus an image, half-press the shutter button for Auto
Focus or focus manually before you press [0] (Movie) to start recording.
To focus with manual focus
1.
On the monitor screen, compose the image so
the subject you want to focus on is within the
yellow boundary.
2.
Watching the image on the monitor screen use
[4] (nearer) and [6] (further) to adjust focus.
• At this time the image that is within the boundary
Yellow boundary
will enlarge and fill the monitor screen, which aids
in focusing. If you do not perform any operation for
two seconds while the enlarged image is displayed,
the screen in step 1 will re-appear.
• When the “Control Dial” (page 99) is set to “MF” (Manual Focus), you can use
the control dial for focusing.
44
Snapshot Tutorial
NOTE
• An Auto Macro feature detects how far the subject is from the lens and
automatically selects either Macro Focus or Auto Focus accordingly.
• Use of the flash together with Macro Focus can cause the light of the flash to
become blocked, which may result in unwanted lens shadows in your image.
• Whenever you perform an optical zoom operation while shooting with Auto Focus,
Macro Focus, or Manual Focus, a value will appear on the monitor screen to tell
you the focus range, as shown below. Note that the focus range is displayed
including the Auto Macro range only when shooting with Auto Focus.
Example: oo* cm - 9
* oo is the actual focusing range value.
• The operations assigned to the [4] and [6] keys with the “L/R Key” setting (page
100) are disabled while Manual Focus is selected as the focus mode.
Using Focus Lock
Subject to be focused on
“Focus lock” is a technique you can use when you want to
compose an image in which the subject you want to focus
on is not within the focus frame in the center of the
screen.
• To use focus lock, select “U Spot” or “O Tracking” for
the Auto Focus area (page 109).
1.
Align the monitor screen’s focus frame with
the subject you want to focus on and then halfpress the shutter button.
2.
Keeping the shutter button half-pressed
(which maintains the focus setting), move the
camera to compose the image.
Focus frame
• When “O Tracking” is selected as the Auto Focus
area, the focus frame will move automatically and
follow the subject.
3.
When you are ready to shoot the image, press the shutter button the
rest of the way down.
NOTE
• Focus lock also locks exposure (AE).
45
Snapshot Tutorial
Specifying ISO Sensitivity (ISO)
ISO sensitivity is a measure of sensitivity to light.
1.
In the REC mode, press [SET].
2.
Use [8] and [2] to select the
and then press [SET].
3.
Use [8] and [2] to select the setting you want and then press [SET].
Setting
Auto
ISO80
ISO100
(ISO Sensitivity) Control Panel option,
REC Screen
Description
Icon Display
None
Adjusts sensitivity automatically according to
conditions.
Lower
sensitivity
Slow shutter speed
Less noise
Fast shutter speed
(Set for shooting in
dimly lit areas.)
Some coarseness
(increased digital
noise)
ISO200
ISO400
ISO800
ISO1600
ISO3200
Higher
sensitivity
NOTE
• While “Auto” is selected, Anti Shake corrects for subject movement only (page
106).
• Since higher ISO sensitivity values tend to result in digital noise in images, the
camera performs a noise filtering process. Because of this, it may take relatively
longer for the camera to finish recording an image after it is shot. You will not be
able to perform any key operation while image recording is in progress.
• In the S (Shutter Speed AE) mode, ISO sensitivity always operates according to its
“Auto” setting.
• In the M (Manual Exposure) mode, “Auto” cannot be selected.
46
Snapshot Tutorial
Recording Beautiful Portraits (Make-up Level)
The Make-up Function smoothes the skin texture of the subject and softens facial
shadows caused by harsh sunlight for better looking portraits. You can select a makeup level within the range of “0 (Off)” to “+12 (Max.)”.
1.
Enter the REC mode, and then press [SET].
2.
Use [8] and [2] to select the
and then press [SET].
3.
Use [8] and [2] to select the Make-up Level setting you want, and then
press [SET].
(Make-up Level) Control Panel option,
• You can select a make-up level within the range of “0 (Off)” to “+12 (Max.)”.
4.
Shoot the image.
NOTE
• Selecting any Make-up Level setting from +1 (Min.) to +12 (Max.) causes the
settings below to be configured automatically.
– Face Detection: On
– Focus Mode: AF (Auto Focus)
• Make-up cannot be used with the following functions.
Some BEST SHOT scenes, ART SHOT, Multi SR Zoom, High Speed CS, Time
Lapse, Interval Shot
47
Snapshot Tutorial
Correcting Image Brightness (EV Shift)
You can manually adjust an image’s exposure value (EV value) before shooting it.
• Exposure Compensation Range: –2.0 EV to +2.0 EV
• Unit: 1/3EV
1.
In the REC mode, press [SET].
2.
Use [8] and [2] to select the
then press [SET].
3.
Use [8] and [2] to adjust the exposure compensation value.
(EV Shift) Control Panel option, and
[8], clockwise:
Increases the EV value. A higher EV value is
best for light-colored subjects and backlit
subjects.
[2], counterclockwise:
Decreases the EV value. A lower EV value is
best for dark-color subjects and for shooting
outdoors on a clear day.
To cancel exposure compensation, change the EV value to 0.0.
Exposure compensation value
4.
Press [SET].
This applies the exposure compensation value. The exposure compensation
value you set remains in effect until you change it or turn off the camera (which
causes it to revert to “0.0”).
NOTE
• When shooting under very dark or very bright conditions, you may not be able to
obtain satisfactory results even after performing exposure compensation.
48
Snapshot Tutorial
Using Flash (Flash)
If you plan to use flash, you need to slide the flash switch
to open the flash unit.
1.
In the REC mode, press [2] (
2.
Use [8] and [2] to select the flash setting
you want and then press [SET].
Setting
> Auto Flash
3.
REC Screen
Icon Display
None
Flash switch
Flash
) once.
[2] (
Description
Flash fires automatically in accordance with
exposure (amount of light and brightness)
conditions.
? Flash Off
Flash does not fire.
< Flash On
Flash always fires. This setting can be used to
brighten a subject that normally comes out dark
due to daylight or backlight (daylight synchro
flash).
¥ Red Eye
Reduction
Flash fires automatically. This type of flash can
be used to reduce the chance of redness in the
subject’s eyes.
Slide the flash switch to open the flash unit.
• If you half-press the shutter button while the flash unit is not open when
surrounding light requires flash, the message “Open the flash unit.” will appear
on the monitor screen. The flash will not fire if you go on and fully press the
shutter button. Slide the flash switch to open the flash unit before shooting.
49
Snapshot Tutorial
4.
Press the shutter button to shoot.
Back lamp
Flashes amber while the flash is charging to
indicate that image recording is disabled.
• You will not be able to take another flash
snapshot until the lamp stops flashing amber,
which indicates that charging is complete.
< indicates the flash will fire.
• For information about Flash Range, see page 214.
IMPORTANT!
• Even if you have the Control Panel setting configure for flash, the flash will not fire
unless the flash unit is open.
• When not using flash, press down on the flash unit until it locks into place with a
click.
• Foreign matter on the flash window can react with the light of the flash, producing
some smoke and abnormal odor. Though this does not indicate malfunction, oil
from your fingers and other foreign matter when left on the flash window can
become difficult to clean off later. Because of this, you should make it a regular
habit to wipe the window clean regularly with a soft, dry cloth.
NOTE
• Take care so your fingers and the strap do not block the flash.
• The desired effect may not be obtained when the subject is too far away or too
close.
• Flash charging time (page 214) depends on operating conditions (battery
condition, ambient temperature, etc.).
• Shooting with flash turned off when lighting is dim results in a slow shutter speed,
which can cause image blur due to camera movement. Under such conditions,
secure the camera with a tripod, etc.
• With red eye reduction, the flash is fired automatically in accordance with
exposure. It does not fire in areas where lighting is bright.
• The presence of outdoor sunlight, fluorescent lighting, or some other light source
can cause abnormal image colors.
• Select ? (Flash Off) for the flash setting when shooting in areas where flash
photography is prohibited.
• The flash > (Auto Flash) and ¥ (Red Eye Reduction) flash modes are not
supported while A, S, or M is selected for the recording mode. If you want the flash
to fire, select < (Flash On) as the flash mode.
50
Snapshot Tutorial
Red-eye Reduction
Using the flash to shoot at night or in a dimly lit room can cause red spots inside the
eyes of people who are in the image. This is caused when the light from the flash
reflects off of the retina of the eye. When red-eye reduction is selected as the flash
mode, the camera fires a pre-flash to cause the irises in the eyes of any people in the
image to close, which reduces the chance of red eye.
Note the following important points when using red-eye reduction.
• Red-eye reduction does not work unless the people in the image are looking
directly at the camera (flash).
• Red-eye reduction may not work very well if the subjects are located far away from
the camera.
Specifying the Metering Mode (Metering)
The metering mode determines what part of the subject is metered for exposure.
1.
In the REC mode, press [SET].
2.
Use [8] and [2] to select the
then press [SET].
3.
Use [8] and [2] to select the setting you want and then press [SET].
Setting
B Multi
REC Screen
Icon Display
None
(Metering) Control Panel option, and
Description
Multi-pattern metering divides the image into
sections and measures the light in each section for
a balanced exposure reading. This type of
metering provides error-free exposure settings for
a wide range of shooting conditions.
N Center
Weighted
Center weighted metering concentrates on the
center of the focus area to measure light. This type
of metering is best when you want some level of
control over contrast.
˜ Spot
Spot metering takes readings at a very small area.
Use this metering method when you want
exposure to be set according to the brightness of a
particular subject, without being affected by
surrounding conditions.
51
Snapshot Tutorial
Shooting with Zoom
Your camera is equipped with various types of zoom: optical zoom, HD Zoom, Single
SR Zoom, Multi SR Zoom, and digital zoom. The maximum zoom factor depends on
the image size setting and the digital zoom on/off settings.
Optical zoom
Zooming is performed by changing the lens focal distance, so
there is no deterioration of image quality.
HD Zoom
Allows greater zoom capabilities by cutting out a portion of the
original image and enlarging it, without deterioration of image
quality.
Single SR Zoom
Applies super resolution technology to suppress image
deterioration (page 55).
Multi SR Zoom
Shoots a burst of high-speed images, which are then combined
into a final image in a way that lessens deterioration of image
quality. Multi SR Zoom is enabled only when the “Multi SR
Zoom” recording mode is selected. (page 56)
Digital zoom
A digital process is used to enlarge the center of the image, so
there is deterioration of image quality.
1.
In the REC mode, rotate the zoom controller to zoom.
w Wide Angle
z Telephoto
Zoom controller
w (Wide Angle): Reduces the size of the subject and broadens the range.
z (Telephoto) : Enlarges the subject and narrows the range.
2.
Press the shutter button to shoot.
NOTE
• Use of a tripod is recommended to protect against image blur due to camera
movement when shooting with telephoto.
• Performing a zoom operation changes the lens aperture.
• Zoom operations are supported during movie recording. Zoom operations are
disabled during high speed movie recording. To use zoom, perform the zoom
operation before you press [0] (Movie) to start recording.
• Zoom operations are not supported while shooting with the following feature. The
zoom setting is fixed at full wide angle.
Slide Panorama, Wide Shot, All-In-Focus Macro
52
Snapshot Tutorial
Monitor Screen Information when Zooming
A variety of information is shown on the monitor screen while a zoom operation is in
progress.
. Zoom Mode Icons
Zoom mode
Focal distance
(Converted to 35 mm film
format.)
Focusing Range
(Displayed for Auto Focus,
Macro Focus, and Manual
Focus.)
Image quality limit
(Deterioration starts from
here.)
Zoom bar
The table below shows what appears on the monitor screen based on the zoom
mode.
Zoom mode
REC Screen Icon Display
Optical zoom
None
HD Zoom
None
Single SR Zoom
¨ (White)
Multi SR Zoom
¸ (Black)
Digital zoom
ê
53
Snapshot Tutorial
. Interpreting the Zoom Bar
During a zoom operation, a zoom bar appears on the monitor screen to show the
current zoom setting.
Range where image deterioration is
suppressed.
Deteriorated image range
Wide Angle
Telephoto
Zoom pointer
(Indicates current zoom.)
Optical zoom limit point
Point from which image deteriorates
• The location of this point depends on the image size, the “Zoom (SR)”
setting, and whether Multi SR Zoom is enabled.
. Zoom Factor
The digital zoom factor depends on the image size (page 101), the super resolution
zoom setting, and on whether or not “Multi SR Zoom” is selected (page 56).
• Multi SR Zoom is enabled only when the “Multi SR Zoom” recording mode is
selected.
Image size
Optical
zoom
16M
18.0X
Maximum zoom factor where image
deterioration can be suppressed
Zoom (SR): Off
(HD Zoom)
Multi SR Zoom
Zoom (SR): Single
Total maximum
zoom factor
(In combination
with digital zoom)
18.0X
36.0X
72.0X
3:2
18.0X
18.0X
36.0X
72.0X
16:9
18.0X
18.0X
36.0X
72.0X
10M
18.0X
22.7X
45.5X
90.9X
5M
18.0X
32.4X
64.8X
129.6X
3M
18.0X
40.5X
81.0X
161.6X
VGA
18.0X
129.6X
258.7X
286.9X
54
Snapshot Tutorial
Zooming with Super Resolution (Zoom (SR))
There are two types of Super Resolution Zoom: Single SR Zoom and Multi SR Zoom.
Single SR Zoom uses super resolution to expand the zoom range in which image
quality deterioration is minimized. Multi SR Zoom shoots a series of High Speed CS
images, which are then combined into an image that enables shooting at higher zoom
ratios without loss of image quality. For information about the effective zoom factor
ranges in which Super Resolution Zoom is effective, see page 54.
The procedure below shows how to configure Single SR Zoom settings. For
information about Multi SR Zoom, see page 56.
1.
In the REC mode, press [MENU].
2.
Press [4], use [8] and [2] to select the “r REC MENU” tab, and then
press [6].
3.
Use [8] and [2] to select “Zoom (SR)” and then press [SET].
4.
Use [8] and [2] to select “Single” and then press [SET].
NOTE
• Single SR Zoom is effective when you want to capture delicate textures.
• Single SR Zoom does not work during movie recording.
• Single SR Zoom is disabled when shooting with the following functions.
Triple Self-timer, ART SHOT, Multi SR Zoom, Time Lapse, Triple Shot, some
BEST SHOT scenes
55
Snapshot Tutorial
Expanding the Zoom Range to Shoot Clearer Snapshots
(Multi SR Zoom)
This feature uses super resolution technology and multiple Continuous Shutter (CS)
images to expand the zoom range for overall images of higher quality and clarity
(page 55).
1.
Align the mode dial with [j] (Multi SR Zoom).
2.
Press the shutter button to shoot.
NOTE
• Multi SR Zoom is effective when you want to capture delicate textures.
• The following functions are disabled when shooting with Multi SR Zoom.
Single SR Zoom, Triple Self-time, Sharpness, Contrast
• With Multi SR Zoom, the flash setting automatically becomes ? (Flash Off).
• Shooting with this function automatically sets Anti Shake to “Standard” (page 106),
but large movement of the camera or subject make it impossible to achieve the
desired shot.
• Depending on shooting conditions and image composition, Multi SR Zoom may not
be able to produce the desired result.
• When shooting with this feature, “ISO 3200” cannot be selected for “ISO
Sensitivity” (page 46).
Shooting a Burst of Images (High Speed CS)
Pressing [Õ] (Continuous Shutter) toggles
between the Continuous Shutter mode and the
Single Shot mode (page 30).
[Õ] (Continuous Shutter)
56
Snapshot Tutorial
. Shooting with High Speed CS
With High Speed CS, recording continues as long as you
keep the shutter button depressed.
The table below shows the settings that can be specified
for the CS speed and the number of images per High
Speed CS operation.
CS Speed
(High Speed CS
(fps))
3 fps, 5 fps, 10 fps, 15 fps, 30 fps
fps = frames per second
Maximum CS
Shots
5, 10, 20, 30
CS speed
High Speed CS icon
Maximum CS shots
1.
Align the mode dial with [P] (Program Auto).
2.
Press [Õ] (Continuous Shutter).
• This will display Š (High Speed CS). If this does not happen, press [Õ]
again.
3.
Press [SET].
4.
Use [8] and [2] to select the
option, and then press [SET].
5.
Use [8] and [2] to select the continuous shutter (CS) speed you want,
and then press [4].
(High Speed CS fps) Control Panel
• Use a higher “High Speed CS fps” setting when shooting a fast-moving subject.
6.
Use [8] and [2] to select the
option, and then press [SET].
7.
Use [8] and [2] to select the maximum number of shots and then
press [SET].
8.
Press the shutter button the rest of the way and hold it down.
(Maximum CS Shots) Control Panel
Shooting of images will continue as long as you depress the shutter button or until
the maximum number of images specified by “High Speed CS fps” is reached.
57
Snapshot Tutorial
. Shooting with Prerecord CS
Half-pressing and holding the shutter button causes a pre-record buffer to be
continually updated with images. When the shutter button is fully pressed, buffer
contents are recorded along with a series of real-time images. Use Prerecord CS
when you want to make sure you do not miss fast-moving action.
Shutter button
half-press
Shutter button
full-press
Shutter button
release
Recorded images (up to 30 images)
Pre-recorded images
Continuous recording of images until shutter
button released
1.
Align the mode dial with [P] (Program Auto).
2.
Press [Õ] (Continuous Shutter).
3.
Press [SET].
4.
Use [8] and [2] to select the
option, and then press [SET].
5.
Use [8] and [2] to select the continuous shutter (CS) speed you want,
and then press [4].
(High Speed CS fps) Control Panel
• Use a higher “High Speed CS fps” setting when shooting a fast-moving subject.
6.
Use [8] and [2] to select the
option, and then press [SET].
7.
Use [8] and [2] to select the maximum number of shots, and then
press [4].
8.
Use [8] and [2] to select the
option, and then press [SET].
9.
Use [8] and [2] to select the number of Prerecord (Still) images and
then press [SET].
(Maximum CS Shots) Control Panel
(Pre-record CS Shots) Control Panel
• Settings: 0 shots, 3 shots, 5 shots, 10 shots, 15 shots, 20 shots, 25 shots
• If you select “0 shots”, no pre-record images will be stored when you half-press
the shutter button.
58
Snapshot Tutorial
10.
Half-press and hold the shutter button to start pre-recording.
A pre-record buffer is continually updated with images as long as the shutter
button is pressed.
• The camera will not emit shutter sounds as it pre-records images.
• Releasing the half-pressed shutter button will cause the contents of the prerecord buffer to be deleted.
11.
Full press and hold down the shutter button.
This will record the images in the pre-record buffer followed by real-time recorded
images. Shooting of images will continue as long as you depress the shutter or
until the maximum number of images specified by “High Speed CS fps” is
reached.
. Continuous Shutter Precautions
• You can use any one of the following recording modes to shoot with High Speed
CS:
A (Aperture AE) mode, S (Shutter Speed AE) mode, M (Manual Exposure) mode.
• The greater the number of shots, the longer it takes to save them after shooting is
complete.
• When using a continuous shutter mode, keep the camera still until shooting is
finished.
• Zoom is disabled during continuous shutter operations.
• When shooting with this function, the snapshot image quality automatically
changes to “Normal”.
• When shooting with this function, exposure and focus for the first image are applied
for successive images as well.
• When shooting with this function, the flash setting automatically becomes
? (Flash Off).
• The following image sizes cannot be selected while shooting with this function:
“3:2”, “16:9”. Entering the High Speed CS mode while any one of these image
sizes is selected will cause the image size setting to change to “16M”
automatically.
• The following functions are disabled when shooting with High Speed CS.
Motion Shutter, Triple Self-timer, Single SR Zoom, Multi SR Zoom
• The Self-timer cannot be used in the Prerecord CS mode.
59
Snapshot Tutorial
Shooting with Artistic Effects (ART SHOT)
A variety of artistic effects help to make even common, ordinary subjects become
more novel and exciting.
Scene
Description
HDR Art
Uses HDR (High Dynamic Range, page 82) to turn normal
images into works of art.
Toy Camera
Dark edges and altered hues make images look like they
were shot by a toy camera.
Soft Focus
Overall blurring for a soft and romantic effect.
Light Tone
Weakened contrast for a feeling of airy refinement.
Pop
Enhanced saturation makes colors stand out in with rich
clarity.
Sepia
Sepia tones create a decidedly retro look.
Monochrome
All of the strong contrast and graininess of a black and white
print.
Miniature
Partial blurring makes scenes look like they are from of a
miniature world.
Fisheye
A fisheye lens effect can be used to create a variety of
humorous images.
Sparkling Shot
Softens the overall image and adds points of light for a
sparkle effect.
Crystal ball
Creates a mysterious effect by placing the image in a bubble
floating in midair.
1.
Align the mode dial with [C] (ART SHOT).
2.
Press [SET].
3.
Use [8] and [2] to select
4.
Select the ART SHOT scene you want to use and then press [SET].
, and then press [SET].
60
Snapshot Tutorial
5.
Press [SET], use [8] and [2] to select the fifth Control Panel option
from the top, and then press [SET].
The intensity of the selected effect can be adjusted as described below.
Scene
Adjustment
HDR Art
Effect level
Toy Camera
Hue
Soft Focus
Effect level
Light Tone
Hue
Pop
Effect level
Sepia
Effect level
Monochrome
Effect level
Miniature
Focus area
Fisheye
Effect level
Sparkling Shot
Effect type
Crystal ball
Effect type
6.
Use [8] and [2] to change the setting.
7.
Press [SET].
8.
Press the shutter button to shoot.
. Using the Scene Information Screen
To find out more about a scene, select it with the boundary
on the scene menu and then rotate the zoom controller in
either direction.
• To return to the scene menu, rotate the zoom controller
again.
• To scroll between scenes, use [4] and [6].
• To configure the camera with the settings for the currently
selected scene, press [SET].
61
Snapshot Tutorial
NOTE
• Depending on the “ART SHOT” scenes, some of the items on the menu that
appears may not be usable.
• With this “ART SHOT” scene, the flash setting automatically becomes ? (Flash
Off).
• Movie recording is disabled while “Sparkling Shot” is selected.
• With HDR Art Movie, the “Movie Quality” setting can be either “HD” or “STD” only
(page 103). When any “Movie Quality” setting other than “STD” is selected in
another mode, the “HD” setting is used when shooting with HDR Art Movie.
• When using “HDR Art” for movie recording, the intensity of the art effect is fixed in
accordance with movie settings.
Saving a Second Normal Image When Shooting With HDR Art
(Double (HDR Art))
You can configure the camera to save two images when shooting with HDR Art: one
image with HDR Art effects applied in accordance with the scene you selected plus
another normal (Program Auto) image without any effects applied.
1.
Align the mode dial with [C] and then press [MENU].
2.
Press [4], use [8] and [2] to select the “r REC MENU” tab, and then
press [6].
3.
Use [8] and [2] to select “Double (HDR Art)” and then press [SET].
4.
Use [8] and [2] to select “On” and then press [SET].
While “Off” is selected for the above step, only a single HDR Art image is saved
(normal image not saved).
5.
Press the shutter button to shoot.
62
Snapshot Tutorial
Shooting Multiple Images Over a Specified Period
(Interval Shot)
You can use the procedure below to record a series of images over a specified period
(Interval Shot). This function is useful when recording the movement of stars, a
blooming flower, etc.
• When using this function, shooting with a tripod is recommended.
• To prevent loss of power while shooting, use a fully charged battery.
• Make sure the memory card you are using has sufficient unused space before
using this function.
• Focus is fixed at what they are when shooting is started.
• Depending on the Interval Shot mode scene you are using, brightness and white
balance settings may be fixed at what they are when shooting starts.
1.
Align the mode dial with [F] (Time Lapse).
2.
Press [SET].
3.
Use [8] and [2] to select
[SET].
4.
Use [8], [2], [4], and [6] to select “Interval Shot”, and then press
[SET].
5.
Press [SET], select
6.
Use [8] and [2] to select the setting you want to configure, press [6],
and then use [8] and [2] to change the setting.
7.
on the Control Panel and then press
(Time Lapse Settings), and then press [SET].
Interval
Specifies the shooting interval.
Shots
Specifies the number of shots.
Press [SET].
Scene
• The current Interval Shot settings are shown at the
bottom of the monitor screen.
Interval
Number of shots
63
Snapshot Tutorial
8.
Press the shutter button to start recording.
• The specified number of images is recorded at the
interval you specify in step 6. To interrupt an
ongoing time lapse operation, press the shutter
button.
Remaining
shooting time
NOTE
• The monitor screen is blank while a time lapse operation is in progress. The
camera’s back lamp will be lit to indicate that recording is in progress. Performing a
camera operation while the monitor screen is blank will cause screen contents to
appear. Note, however, that changing the mode dial setting will cause the Interval
Shot operation to stop.
• If the “
Interval” setting is one minute or greater, the camera’s lens will retract
and the back lamp will go out between shots. Turning on the camera while an
Interval Shot operation is in progress will cause a message to appear.
The camera’s battery can be charged over a USB connection while the lens is
retracted during Interval Shot. If you want the battery to be charged during Interval
Shot, set up the USB connection before starting the recording operation.
Connecting the USB cable while the lens is extended will cause camera power to
turn off.
• Changing the shutter speed may cause the Interval Shot “
Interval” setting to
change automatically.
• The “Auto Flash” and “Red Eye Reduction” flash settings are not supported while a
setting other than “Auto” is selected for the “Aperture” or “Shutter Speed” setting
while using Interval Shot. Selecting Interval Shot while an unsupported flash setting
is in effect will cause the flash mode setting to change automatically to “Flash Off”.
• The functions below cannot be used with this function.
Remote Capture, CS, Handsfree, Anti Shake, Zoom (SR), Continuous AF
• Pressing the shutter button while the camera is standing by between Interval Shot
shots will cancel the Interval Shot operation and display the message “Interval
shooting cancelled.”
• The Auto Power Off is disabled while shooting with this function (page 176).
64
Snapshot Tutorial
Shooting with Triple Shot
Triple Shot shoots a burst of three images and stores them in memory. This feature is
great for making sure you don’t miss those special moments when kids are around.
1.
Align the mode dial with [D] (Triple Shot).
2.
Point the camera at the subject and then half-press the shutter button.
The camera will start pre-recording images at this time.
• If you release the half-pressed shutter button before pressing it the rest of the
way down, all of the images currently in the pre-record buffer will be deleted.
3.
Press the shutter button all the way down to record.
This will record three images: one of the action before the shutter button is fully
pressed plus two real-time images.
• Pressing the shutter button all the way without first half-pressing it will result in
only two images being recorded.
NOTE
• The settings in the table below are fixed while shooting with this function.
Self-timer
Off
Flash
Flash Off
Image Quality
Normal
Single SR Zoom
Off
Face Detection
On
Focus Mode
AF
AF Area
“Intelligent” or “Spot”*
* If you select “I Multi” or “O Tracking” for this setting in another mode and then
shoot with Triple Shot, shooting is performed using the “U Spot” setting.
65
Snapshot Tutorial
Recording Movies
To record a movie
The following procedure explains how to record a standard (STD) movie.
This camera supports Premium Auto Pro movie recording (page 67).
See the pages indicated below for more information about movies.
High-definition movie (FHD movie): page 69
High speed movie (HS movie): page 69
Mode dial
1.
Align the mode dial with [P] (Program
Auto) or [Ÿ] (Premium Auto Pro).
2.
Press [MENU].
3.
Press [4], use [8] and [2] to select the
“r REC MENU” tab, and then press
[SET].
4.
5.
Use [8] and [2] to select “Movie
Quality” and then press [6].
[0] (Movie)
[SET]
[MENU]
[8][2][4][6]
Use [8] and [2] to select “STD” (Standard), and then press [SET].
• Recording is performed with an aspect ratio of 4:3, an image size of 640x480
pixels, and a frame rate of 30 frames per second (STD Movie). Image size
setting cannot be changed.
• The shooting range for movies is smaller than that for snapshots. You can
display the movie shooting range with “Shooting Info” (page 114).
6.
Press [0] (Movie).
Recording time
This will start recording and display Y on the
monitor screen.
Movie recording includes stereo audio.
7.
Press [0] (Movie) again to stop recording.
• Each movie can be up to 29 minutes long. Movie
recording stops automatically after 29 minutes of
recording. Movie recording also will stop
automatically if memory becomes full before you
stop movie recording by pressing [0] (Movie)
again.
66
Remaining recording time
(page 211)
Recording Movies
Recording Movies with Premium Auto Pro
When Premium Auto Pro is enabled (page 30), the
camera automatically make judgments about the
subject, shooting conditions, and other parameters. The
result is higher quality images than those produced by
Program Auto recording. The shooting environment detected by the camera is
displayed at the bottom of the REC mode screen.
• Premium Auto Pro is enabled for FHD movies and STD movies only.
• Using Premium Auto Pro uses up the battery charge more quickly than using
Program Auto recording.
Shooting with BEST SHOT
With BEST SHOT (page 77), you can select the sample scene that matches the type
of movie you are trying to shoot and the camera will change its setup accordingly, for
beautiful movies every time.
Minimizing the Effects of Camera Movement during Movie Recording
You can use Anti Shake (page 106) to configure the camera to minimize the effects of
camera movement during FHD and STD movie recording. Note that Anti Shake
cannot be used with HDR Art Movie and that Anti Shake does not prevent image blur
due to subject movement.
Audio
Your camera has built-in microphones that can be used to record audio (stereo)
during movie recording.
• Your camera has a function to reduce wind noise (Wind Noise Cut) when recording
movies (page 111).
. Recording Precautions
Microphones
• The camera also records audio. Note the following points
when shooting a movie.
– Take care that the microphones are not blocked by your
fingers, etc.
– Good audio recording results are not possible when the
camera is too far away from what you are trying to
record.
– Performing a zoom operation while shooting can cause zoom and/or auto focus
noise to be in the audio recording.
– Operating camera buttons while shooting can cause button noise to be picked
up in the audio.
• When shooting with the “HS” movie mode at a frame rate setting of “30-120 fps” or
“30-240 fps”, audio is recorded only while the camera is shooting at 30 fps. Audio is
not recorded at any other frame rates.
67
Recording Movies
IMPORTANT!
• Spending a long time using movie recording will cause the camera to become
slightly warm to the touch. This is normal and does not indicate malfunction.
• Shooting movies for long periods in areas where temperature is relatively high can
cause digital noise (dots of light) to appear in the movie image. A rise in the
camera’s internal temperature also may force movie recording to stop
automatically. If this happens, stop recording and allow the camera to cool down,
which should cause normal operation to resume.
• Using the camera’s built-in memory or certain types of memory cards can slow
down processing speed. Whenever possible use an Ultra High-Speed Type
memory card. Note, however, that not all operations can be guaranteed even if an
Ultra High-Speed Type memory card is used. Certain movie quality settings can
result in too much time being required to record data, which can result in breaks in
the image and/or audio during playback. If this happens, the Y will turn yellow on
the monitor screen.
NOTE
• Zoom operations are supported during movie recording (page 52). Zoom is
disabled during high speed movie recording. To use zoom for high speed movie
recording, perform the zoom operation before you press [0] (Movie) to start
recording.
• Both Single SR Zoom (page 55) and Multi SR Zoom (page 56) are disabled during
movie recording.
• The effects of camera movement in an image become more pronounced when you
shoot close up or with a large zoom factor. Because of this, use of a tripod is
recommended under these conditions.
• Except for High Speed Movie, Continuous AF (page 110) is performed during
movie recording while “AF” (Auto Focus) or “Macro” is selected for the “Focus”
setting.
• Face Detection is disabled during normal FHD and STD, and high speed movie
recording. Face Detection is enabled when shooting movies with Premium Auto
Pro (FHD and STD).
• The following functions do not support movie recording.
Triple Shot, Multi SR Zoom, some BEST SHOT scenes
• The A, S, and M recording modes are not supported when shooting a movie, or
when using the “Prerecord (Movie)” BEST SHOT scene. In these cases, the
recording mode is always P (Program Auto).
68
Recording Movies
Recording a High-definition Movie
This camera supports recording of high-definition (FHD) movies. The aspect ratio of
an FHD movie is 16:9, the image size is 1920x1080 pixels, and the frame rate is
30 fps. Image quality and image size settings cannot be changed.
1.
Align the mode dial with [P] (Program Auto) or [Ÿ] (Premium Auto
Pro).
2.
Press [MENU].
3.
Press [4], use [8] and [2] to select the “r REC MENU” tab, and then
press [SET].
4.
Use [8] and [2] to select “Movie Quality” and then press [6].
5.
Use [8] and [2] to select “FHD”, and then press [SET].
6.
Record the movie the same way as you would a normal movie (page
66).
Press [0] (Movie) to start and stop recording.
Recording a High Speed Movie
This camera supports recording of high speed movies at a maximum speed of
1000 fps. The aspect ratio of movies recorded with this mode depends on the frame
rate (recording speed).
• When recording with the frame rate setting of “30-120 fps” or “30-240 fps” frame
rate setting, audio recording is supported during 30 fps recording only. Audio is not
recorded at any other frame rates.
1.
Align the mode dial with [P] (Program Auto).
2.
Press [MENU].
3.
Press [4], use [8] and [2] to select the “r REC MENU” tab, and then
press [SET].
69
Recording Movies
4.
Use [8] and [2] to select “Movie Quality” and then press [6].
5.
Use [8] and [2] to select the frame rate (recording speed) you want
and then press [SET].
A fast frame rate (such as 1000 fps) will result in a smaller image size.
Movie
Quality
6.
REC Screen
Icon Display
Frame Rate
Image Size
(Pixels)
HS1000
1000 fps
224x64
HS480
480 fps
224x160
HS240
240 fps
512x384
HS120
120 fps
640x480
HS30-240
30-240 fps
512x384
HS30-120
30-120 fps
640x480
• fps (frames per
second) is a unit of
measurement
indicating the
number of images
recorded or played
back per second.
Record the movie the same way as you would a normal movie (page
66).
Press [0] (Movie) to start and stop recording.
• During High Speed Movie recording (HS120, HS240, HS480, HS1000), focus
is fixed at the position where it was when recording started. To focus an image,
half-press the shutter button for Auto Focus or focus manually before you press
[0] (Movie) to start recording.
• Continuous AF is operational when recording at 30 fps with “HS30-120” or
“HS30-240”. However, focus becomes fixed whenever you switch to 120 fps or
240 fps.
• When “HS30-120” or “HS30-240” is selected as the frame rate, recording
always starts with a frame rate of 30 fps. You can switch the frame rate
between 30 fps and 120 fps or between 30 fps and 240 fps only while recording
is in progress. Press [4], [6], or [SET] to switch speeds. Audio is recorded
only while shooting at a 30 fps.
70
Recording Movies
NOTE
• The higher the frame rate (speed), the more lighting is required when shooting.
When shooting a high speed movie, shoot in a well-lit environment.
• When recording certain types of movies, the image that appears on the monitor
screen may be smaller than normal. When recording a high speed movie, there are
black bands along the top, bottom, left, and right of the screen.
• When recording a high speed movie, light source flicker can cause horizontal
bands to appear in the image. This does not indicate malfunction of the camera.
• Monitor screen content switching is disabled during high speed movie recording.
Using Prerecord Movie (Prerecord (Movie))
Prerecord (Movie) maintains a pre-recording of approximately five seconds of action
(approximately two seconds for High Speed Movie). When you start real-time
recording, the pre-recorded content is stored followed by the real-time recording, to
help make sure you do not miss anything by being late pressing the record button.
[0] (Movie)
[0] (Movie)
Movie
Real-time recording start
Real-time recording end
Approximately 5-second prerecorded part (from the buffer)
• Approximately two seconds for high speed movie
71
Recording Movies
. To set up the camera to shoot with Prerecord Movie
1.
Align the mode dial with [b] (BEST SHOT).
2.
Press [MENU].
3.
Press [4], use [8] and [2] to select the “r REC MENU” tab, and then
press [SET].
4.
Use [8] and [2] to select “Movie Quality” and then press [6].
5.
Use [8] and [2] to select the movie mode you want to use for shooting
and then press [SET].
6.
Press [SET].
7.
Use [8] and [2] to select
8.
Use [8], [2], [4], and [6] to select the “Prerecord (Movie)” scene and
then press [SET].
, and then press [SET].
This causes ‰ (Prerecord (Movie)) to appear on the monitor screen, indicating
that the camera is prerecording to its buffer.
. To shoot a Prerecord Movie
1.
After using the above procedure to set up the camera for Prerecord
Movie, point the camera at the subject.
2.
When you are ready to record, press [0] (Movie).
This will save the approximately five seconds of action that was prerecorded in
the buffer before you pressed [0] (Movie) (two seconds if you are using high
speed movie) and start real-time recording.
3.
Press [0] (Movie) again to stop recording.
• To turn off Prerecord Movie recording, align the mode dial with [P] (Program
Auto) or [Ÿ] (Premium Auto Pro).
• When shooting with the high speed movie “HS30-120” and “HS30-240” setting,
you cannot change the speed (fps) setting while the camera is pre-recording to
the buffer in step 1 of the above procedure. You can change the speed (fps)
setting after you press [0] (Movie) to start real-time recording.
72
Recording Movies
NOTE
• While the camera is set up for shooting with Prerecord Movie, pressing the shutter
button will not shoot a snapshot unless movie recording is in progress. With highdefinition (FHD) and standard (STD) movie, you can shoot still images while
realtime movie recording is in progress.
• When shooting with Prerecord Movie in combination with high speed movie,
rotating the control dial will not change the EV shift or white balance setting, even if
“EV Shift” or “White Balance” is assigned for the “Control Dial” function. To change
the EV shift or white balance setting in this case, use the Control Panel.
Recording a Time Lapse Movie (Time Lapse)
You can use this function to record movies of natural events that occur over time, to
speed up the flow of traffic in a city scene, or to record other similar types of movies.
• When using this function, shooting with a tripod is recommended.
• To prevent loss of power while shooting, use a fully charged battery.
• Make sure the memory card you are using has sufficient unused space before
shooting with this function.
• Focus is fixed at what they are when shooting is started.
• For some scenes, brightness and white balance settings are fixed at what they are
when shooting is started.
1.
Align the mode dial with [F] (Time Lapse).
2.
Press [SET].
3.
Use [8] and [2] to select
[SET].
4.
Select the scene you want to use and then press [SET].
on the Control Panel and then press
• A scene that can be used for time lapse recording is indicated by ».
5.
Press [SET], select
6.
Use [8] and [2] to select “
Interval” or “
Total Time”, press [6],
and then use [8] and [2] to change the setting.
(Time Lapse Settings), and then press [SET].
Each scene is initially configured with unique “
Interval” and “
Total Time”
default settings suitable for that scene. You can change these settings, if you
want.
Interval
Specifies the number of seconds between shots.
Total Time
Specifies the recording time. Selecting “Off” causes
recording to continue until the shutter button is pressed
again.
73
Recording Movies
7.
Press [SET].
• Time Lapse settings are shown at the bottom of
the screen.
Interval
Scene
Total Time
8.
Press the shutter button to start recording.
Recording time
• Shooting is repeated at the interval specified in
step 6.
• Recording stops when the recording time
specified in step 6 elapses or when the shutter
button is pressed again.
• Remaining recording time is not displayed
when the “
Total Time” setting is “Off”.
Remaining recording time
NOTE
• During Time Lapse recording, the monitor screen will turn off in accordance with
the “Sleep” setting (page 176). Change the “Sleep” setting to “Off” if you want the
monitor screen to stay on. Note, however, that this setting will use up battery power
more quickly.
• If sleep is enabled (page 176), the monitor screen will turn off after the preset sleep
period if no camera operation is performed, but the time lapse recording operation
will continue. The camera’s back lamp will flash at this time. Performing any
operation while the monitor screen is blank will turn it back on. However, the
following operations will not turn the monitor screen back on.
– Pressing [ON/OFF] (Power)
– Pressing the shutter button all the way
– Rotating the mode dial
• The following functions cannot be used with this function.
Single SR Zoom, Anti Shake, Lighting, Continuous AF, Triple Self-timer,
Motion Shutter, Face Detection, Metering, ISO, ISO High Limit, Make-up
• The frame rate of playback of movies shot with this function is 20 fps. Movie quality
depends on the scene you are using.
Scene 2 to 7: FHD
Scene 8 to 12: HD
• Note that audio is not recorded when recording with this function.
• When shooting in combination with the functions below, maximum zoom is 2X and
the focus mode is infinity.
Clouds, Sundown
• The camera can be configured to play only Time Lapse movies during a slideshow
(page 128).
• When using “» HDR Art” for movie recording, the intensity of the art effect is fixed
in accordance with movie settings.
• You cannot shoot a snapshot by pressing the shutter button while time lapse
recording is in progress (Snapshot In Movie).
74
Recording Movies
• The reset operation (page 182) returns “Interval” and “Total Time” to their initial
default settings. Each Time Lapse scene has its own unique “Interval” and “Total
Time” settings.
• To adjust brightness when shooting with the Time Lapse “» Night Scene”, use
“S” (Shutter Speed) on the Control Panel (page 40) to adjust the shutter speed.
. Using the Scene Information Screen
To find out more about a scene, select it with the boundary
on the scene menu and then rotate the zoom controller in
either direction.
• To return to the scene menu, rotate the zoom controller
again.
• To scroll between scenes, use [4] and [6].
• To configure the camera with the settings for the currently
selected scene, press [SET].
Shooting a Snapshot while Shooting a Movie
(Snapshot In Movie)
You can shoot snapshots while movie recording is in progress. When the camera is in
the Single Shot mode, you can shoot snapshots one-by-one. In the CS mode, holding
down the shutter button will record up to seven consecutive images at a speed of
approximately 10 images per second (fps). You can shoot a maximum total of
28 images during a single movie recording operation.
1.
While a movie is being recorded, press the
shutter button.
• In the CS mode, images continue to be shot as long
as you keep the shutter button depressed.
• While movie recording is in progress, you can toggle
between the Single Shot Mode and the CS mode by
pressing [Õ] (Continuous Shutter), [4], [6], or
[SET]. Note that this method for mode switching is
possible only during movie recording. The CS mode
is indicated when
is white (on the monitor
screen), and the Single Shot mode is selected when
t is white.
75
Snapshot
recording mode
Number of recordable
snapshots
Recording Movies
NOTE
• Note that the flash cannot be used when shooting a Snapshot In Movie.
• Note that shooting a snapshot while shooting a movie is supported during FHD
movie and STD movie recording only. It is not supported during other types of
movie recording.
• Snapshots shot with Snapshot In Movie cannot be focused individually. The focus
will be the same as the movie being recorded.
• The field of view of a snapshot shot while FHD movie recording is in progress will
be wider than the field of view of the FHD movie.
• The snapshot image quality automatically changes to “Normal”.
• The P (Program Auto) recording mode is used when you shoot a snapshot during
movie recording.
• You cannot shoot with Snapshot In Movie while Motion Shutter or Time Lapse
movie recording is in progress.
76
Recording Movies
Using BEST SHOT
BEST SHOT provides you with a collection of sample
“scenes” that show a variety of different types of shooting
conditions. When you need to change the setup of the
camera, simply find the scene that matches what you are
trying to achieve, and the camera sets up for it
automatically. This helps to minimize the chance of ruined
images due to poor exposure and shutter speed settings.
To shoot with BEST SHOT
1.
Align the mode dial with [b] (BEST SHOT).
2.
Press [SET].
3.
Use [8] and [2] to select
[SET].
[b]
, and then press
This will display a menu of BEST SHOT scenes.
4.
Use [8], [2], [4], and [6] to move the
boundary to the scene you want to select.
Currently selected
scene (with boundary)
• You can scroll to another page of scenes by
pressing [8] or [2].
• To return to normal snapshot recording, align the
mode dial with [P] (Program Auto).
5.
Press [SET] to configure the camera with the
settings for the currently selected scene.
This returns to the REC mode.
• To select a different BEST SHOT scene, repeat
the above procedure from
step 2.
6.
Scene name
Scene number
Press the shutter button (if you are shooting a snapshot) or [0] (Movie)
(if you are shooting a movie).
• With some BEST SHOT scenes, the message “Busy... Please wait...” will
appear on the monitor screen after you press the shutter button. The camera is
in the process of recording an image until the message appears. Keep the
camera still. The image processing operation takes some time to complete
after the message appears. You will not be able to record another image while
the message is displayed.
77
Using BEST SHOT
. Using the Scene Information Screen
To find out more about a scene, select it with the boundary
on the scene menu and then rotate the zoom controller in
either direction.
• To return to the scene menu, rotate the zoom controller
again.
• To scroll between scenes, use [4] and [6].
• To configure the camera with the settings for the currently
selected scene, press [SET].
. BEST SHOT Precautions
• Sample images shown on BEST SHOT scene screens were not shot with this
camera. There are provided to illustrate the effects and merits of each scene.
• Images shot using a BEST SHOT scene may not produce the results you expected
due to shooting conditions and other factors.
• You can modify the camera settings that are configured after you select a BEST
SHOT scene. Note, however, that the BEST SHOT settings revert to their defaults
when you select another BEST SHOT scene or turn off the camera.
• Snapshot shooting is disabled while the following BEST SHOT scenes are being
used.
Prerecord (Movie)
• Movie recording is disabled while the following BEST SHOT scenes are being
used.
Blurred Background, All-In-Focus Macro, HS Best Selection, HS Anti Shake, Wide
Shot, HS Night Shot, Slide Panorama, Snapshot, HDMI TV Output
• When the movie mode is FHD/STD, movies are recorded using the settings of the
selected BEST SHOT scene. For high speed movie recording, BEST SHOT scene
settings are ignored and movie recording is performed as it normally is.
• BEST SHOT scenes that use High Speed CS ignore the “Zoom (SR)” setting.
• With the BEST SHOT scenes below, certain shooting conditions can cause the
image area to become narrower than normal.
HS Night Scene and Portrait, HS Night Shot
• The maximum zoom factor is 2.0X when using the BEST SHOT scenes below.
Fireworks, Sunset
78
Using BEST SHOT
Creating and Using Your Own Setups (CUSTOM SHOT)
You can register up to 999 setups, based on snapshots shot with the camera, as
“CUSTOM SHOT” scenes. Selecting a registered “CUSTOM SHOT” scene
configures the camera with its settings. The setups of snapshots recorded with the
following modes and features can be registered as “CUSTOM SHOT” scenes.
• Program Auto
• A Mode
• S Mode
• M Mode
• BEST SHOT (Excluding “Prerecord (Movie)”, and “HDMI TV Output”)
. To register a “CUSTOM SHOT” scene
1.
On the BEST SHOT scene menu, select the scene named “CUSTOM
SHOT (Register User Scene)” and then press [SET].
2.
Use [4] and [6] to select the snapshot whose setup you want to save.
3.
Use [8] and [2] to select “Save”, and then press [SET].
Your scene will be assigned the name “Custom Scene”, along with a scene
number.
NOTE
• A movie setup cannot be registered as a “CUSTOM SHOT” scene.
• You can check the settings of the currently selected “CUSTOM SHOT” scene by
displaying the camera’s setting menus and looking at its settings.
• “CUSTOM SHOT” scenes are assigned numbers in the sequence: U1, U2, and so
on.
• The following are the settings that are saved for each “CUSTOM SHOT” scene.
Face Detection, Focus, EV Shift, White Balance, Flash, ISO, Metering, Lighting,
Flash Intensity, Sharpness, Saturation, Contrast
• “CUSTOM SHOT” scenes are stored in built-in memory (page 170) in the SCENE
folder (snapshots).
• Formatting the camera’s built-in memory (page 182) deletes all user “CUSTOM
SHOT” scenes.
• Use the following procedure when you want to delete a “CUSTOM SHOT” scene.
1Display the information screen (page 78) of the user BEST SHOT scene you
want to delete.
), select “Clear”, and then press [SET].
2Press [2] (
79
Using BEST SHOT
. To record with a registered CUSTOM SHOT scene
1.
In the BEST SHOT Mode, select the registered “Custom Scene” (page
77).
2.
Press the shutter button to shoot.
Shooting with High Speed Anti Shake
(HS Anti Shake)
In addition to optical Anti Shake, a single press of the shutter button while HS Anti
Shake is enabled causes the camera to record multiple images and automatically
combine them. Use this feature to minimize image blur due to camera movement
under conditions where optical anti shake is not possible for some reason.
1.
In the BEST SHOT Mode, select “HS Anti Shake” (page 77).
2.
When you are ready to shoot, press the shutter button.
NOTE
• With this BEST SHOT scene, the flash setting automatically becomes ? (Flash
Off).
• HS Anti Shake may not operate properly resulting in blurred images if the camera
is moved more than the allowable range or if the subject moves during shooting.
• When shooting with these BEST SHOT scenes, the “ISO Sensitivity” (page 46) and
“ISO High Limit” (page 105) are fixed at “Auto”.
80
Using BEST SHOT
Shooting Bright Images in the Dark without Flash
(HS Night Shot)
The camera shoots a series of images and then merges them into a final image. The
result is a bright image, even if shot in the dark without a flash.
Shot with “Program Auto”, without flash
Shot with “HS Night Shot”
1.
In the BEST SHOT Mode, select “HS Night Shot” (page 77).
2.
Press the shutter button to shoot.
• Take care to avoid camera movement and subject movement as you shoot.
• You should be able to see the subject(s) on the monitor screen when
composing the image.
NOTE
• When shooting with this function, the “ISO Sensitivity” (page 46) becomes “Auto”
(fixed).
• If camera movement occurs when shooting with this function, the anti-shake
process will result in an image range that is narrower than normal.
• When shooting with this function, the 16M, 3:2, and 16:9 image size settings
cannot be selected. If one of these sizes is selected in another mode, the image
size will change to 10M when this function is selected.
81
Using BEST SHOT
Digitally Correcting for Overexposure and Underexposure
(HDR)
With HDR (High Dynamic Range), the camera shoots a series of CS images using
different exposure settings and combines them into a final image to correct for
overexposure or underexposure of subjects of different brightness levels.
1.
In the BEST SHOT Mode, select “HDR” (page 77).
2.
Press [SET] and then use [8] and [2] to select the
Control Panel option, and then press [SET].
3.
Use [8] and [2] to select the HDR Level setting you want, and then
press [SET].
(HDR Level)
• The HDR Level can be set to Level 1, Level 2, or Level 3.
4.
Press the shutter button to shoot.
NOTE
• HDR works best when shooting with the camera mounted on a tripod.
• Shooting with this function causes the flash setting to change automatically to
? (Flash Off).
• Anti Shake correction performed to compensate for camera movement while
shooting with this function results in an image area that is narrower than normal.
• The desired HDR effect may not be attained if the camera or subject moves during
shooting.
82
Using BEST SHOT
Shooting with a Blurred Background (Blurred Background)
This function analyzes a burst of consecutive images and then blurs the background
behind the main subject. This creates an effect that really makes the subject stand
out, just like photographs taken with a single-lens reflex camera. The blur effect can
be set to one of three levels.
Shot with “Program Auto”.
Shot with “Blurred Background”.
1.
In the BEST SHOT Mode, select “Blurred Background” (page 77).
2.
Press [SET] and then use [8] and [2] to select the
Control Panel option, and then press [SET].
3.
Use [8] and [2] to select the Image Blur level you want, and then
press [SET].
(Blur Effect)
• The Image Blur level can be set to Level 1, Level 2, or Level 3.
4.
Press the shutter button to shoot.
• Get as close as possible to the subject. Also, the background should be as far
away as possible from the subject. The required distances depend on the
zoom factor being used.
Example : When zoom is set to full wide (W), the distance between the camera
and subject should be 30cm, while the distance between the subject
and background should be at least 1 meter.
NOTE
• With this function, the flash setting automatically becomes ? (Flash Off).
• Shooting with this function automatically sets Anti Shake to “Standard” (page 106),
but large movement of the camera or subject make it impossible to achieve the
desired shot.
• If the camera determines that it is unable to blur the background of an image for
some reason, it will display the message “Blurring failed. Normal background
recorded.”. Note, however, that the image will be saved, even if background
blurring is not possible.
83
Using BEST SHOT
Shooting with Full Focus Macro (All-In-Focus Macro)
All-In-Focus Macro shoots and analyzes a burst of multiple images and combines
them in a way that produces an image in which everything is in focus: from nearby
objects to distant objects.
“Program Auto” image
All-In-Focus Macro
1.
In the BEST SHOT Mode, select “All-In-Focus Macro” (page 77).
2.
Press the shutter button to shoot.
• Move the camera as close to the subject as possible, and take care to avoid
camera movement and subject movement as you shoot.
NOTE
• When shooting with this function, zoom is fixed at wide angle.
• When shooting with this function, the flash setting automatically becomes
? (Flash Off).
• Shooting with this function automatically sets Anti Shake to “Standard” (page 106),
but large movement of the camera or subject make it impossible to achieve the
desired shot.
• The message “Could not merge. Will record as normal images.” will appear if the
All-In-Focus Macro process cannot be performed for some reason. The images
shot by the camera will be saved even if they cannot be merged.
84
Using BEST SHOT
Using Continuous Shutter with Auto Focus (AF-CS)
AF-CS shoots up to 30 CS images while keeping the subject in focus. This feature
comes in handy when shooting children and other fast-moving subjects. The CS
speed is automatically adjusted in accordance with shooting conditions within the
range of three to five frames per second.
1.
In the BEST SHOT Mode, select “AF-CS” (page 77).
2.
Press the shutter button the rest of the way down.
Hold down the shutter button to shoot up to 30 images at high speed.
NOTE
• Zoom is disabled during continuous shutter operations.
• The following image sizes cannot be selected while shooting with Auto Focus CS:
3:2, 16:9. If select AF-CS while either of these image sizes is selected, the camera
will automatically switch the images size setting to 16M.
• The following camera features cannot be used while shooting with Auto Focus CS:
Motion Shutter, Triple Self-timer, Single SR Zoom.
• The settings in the table below are fixed while shooting with AF-CS.
Image Quality
Normal
Flash
Flash Off
Focus Mode
AF
AF Area
Spot
85
Using BEST SHOT
Shooting with Priority on Subject Faces
(HS Best Selection)
With HS Best Selection, the camera automatically shoots a series of images, and
selects the best one based on facial image blur, and facial expression (whether the
subject is smiling or blinking).
1.
In the BEST SHOT Mode, select “HS Best Selection” (page 77).
2.
Press the shutter button to shoot.
NOTE
• Shooting with this function causes the flash setting to change automatically to
? (Flash Off).
• If one or more of the faces are blurred in all of the images that are shot, they will be
blurred in the final image as well.
• The following conditions may make it impossible for the camera to determine if the
subject is blinking or smiling. This may result in a final image in which the subject is
blinking or not smiling.
– Faces that are partially or completely darkened by shadows, etc.
– Hair that is hiding or near the eyes
– Eye glasses
– Small faces
– Faces that are not looking directly at the camera
• Shooting a large group of people will cause processing of the image after shooting
to take longer.
86
Using BEST SHOT
Shooting a Panorama Image (Slide Panorama)
With Slide Panorama, you move the camera to compose and record multiple images,
which are then combined to a panorama. This feature lets you shoot a panorama of
up to 360 degrees, which is dramatically greater than the physical capabilities of the
lens.
• The final panorama image can be one of the two sizes shown below.
Slide Direction is Right or Left: Maximum 11520x1080 pixels
Slide Direction is Up or Down: Maximum 1920x7296 pixels
• Zoom operations are not supporting during Slide Panorama shooting. The zoom
setting is fixed at full wide angle.
• You can use Slide Panorama to shoot a horizontal image up to approximately
360 degrees and a vertical image up to approximately 180 degrees.
If you shoot a horizontal Slide Panorama image that is less than 360 degrees, the
image size will become 60, 120, 180, 240, or 300 degrees.
1.
In the BEST SHOT Mode, select “Slide Panorama” (page 77).
2.
Press [SET] and then use [8] and [2] to select the
Control Panel option, and then press [SET].
3.
Use [8] and [2] to select the direction you are planning to move the
camera while shooting, and then press [SET].
(Slide Direction)
You can select one of four directions: Right, Left, Up, or Down.
4.
Point the camera at the start of the panorama and half-press the
shutter button to allow the camera to focus automatically.
87
Using BEST SHOT
5.
Press the shutter button the rest of the way down
and a slide cursor will appear on the monitor
screen. Slowly move the camera in the direction
indicated by the arrow on the screen until the
slide cursor reaches the other end of its
movement range (i.e. all the way to the right
when moving the camera to the right).
• The camera will start composing the panorama image
internally when the slide cursor reached the other end
of the movement range.
• Image composing also will start automatically if you
stop moving the camera during panorama shooting.
Slide cursor
NOTE
• The following conditions are not compatible with Slide
Panorama shooting.
– Subject whose brightness is very different from that of its surroundings due to
artificial light, sunlight, etc.
– Rivers, waves, waterfalls, or other subject with constantly changing patterns
– Sky, beach, or other subject with continuous patterns
– Camera too close to the main subject
– Moving subject
– Dark surroundings
• Slide Panorama may stop part way through in the following cases.
– Subject or camera movement
– Camera movement that is too fast or too slow
• Shooting a Slide Panorama image after half-pressing the shutter button to perform
Auto Focus may not produce the desired results if there are considerable
differences in the brightness, color, and/or focus of the individual images. If this
happens, try changing the focus position by focusing on a different subject, etc.
• Since a Slide Panorama image is created by joining multiple images together, there
may be some roughness at the point where two images are joined.
• Shooting under a flickering light source (such as fluorescent lighting) may result in
uneven brightness and/or coloring in the final Slide Panorama image.
• The exposure and white balance when shooting Slide Panorama images are fixed
at the levels measured when you half-press the shutter button at the beginning of
the operation.
• Shooting with this function causes the flash setting to change automatically to
? (Flash Off).
88
Using BEST SHOT
Shooting with a Super Wide Angle of View (Wide Shot)
With this feature, a number of images are shot and then combined to produce an
image with a super-wide angle of view that exceeds the widest angle of view possible
with the lens. Converted to 35 mm equivalents, the focal distances available with this
feature enable shooting with approximate angles of view of 15 mm and 19 mm.
25 mm (lens widest angle)
19 mm
15 mm
1.
In the BEST SHOT Mode, select “Wide Shot” (page 77).
2.
Press [SET] and then use [8] and [2] to select the
Control Panel option, and then press [SET].
3.
Use [8] and [2] to select the width setting (angle of view) you want
and then press [SET].
(Wide Level)
There are two settings available: “19 mm” and “15 mm”.
“15 mm” shoots a wider area than “19 mm”.
4.
Hold the camera so it is
upright, with the shutter
button and other controls
at the bottom.
• Do not point the camera
straight down at the ground
at this time. If you do, the
camera’s built-in vertical/
horizontal position sensor
will not operate properly
and may make it impossible
to start shooting.
Control dial
Shutter button
89
Using BEST SHOT
5.
Point the camera at the
subject you want in the
center of the image and then
half-press the shutter button
to focus.
• The outer blue boundary on
the screen indicates the
recordable range of the image.
Desired image
Blue boundary
Center part at the start of the
shooting operation
6.
Press the shutter button the rest of the way
down and slowly move the camera in
accordance with the instructions and arrow that
appear on the monitor screen.
• Holding the camera firmly with both hands, follow
the instructions that appear on the monitor screen to
slowly slide the camera horizontally or vertically at a
constant speed in an arc centered on your body.
– When sliding the camera horizontally, do not allow
Instructions
your body to move left or right. A vertical line
Arrow
running through your body should serve as the
axis.
– When sliding the camera vertically, do not allow your body to move upwards
or downwards. A horizontal line between your shoulders should serve as the
axis.
– Take care not to slide the camera diagonally and be sure to maintain a firm
grip on it.
• The camera will start composing the super-wide image internally when the
slide cursor reached the other end of the movement range.
• Image composing also will start automatically if you stop moving the camera
during super-wide shooting.
90
Using BEST SHOT
NOTE
• The “15 mm” and “19 mm” angle of view values are approximate and are provided
for reference only. Actual angle of view values are not guaranteed.
• Zoom operations are not supported during Wide Shot shooting. The zoom setting
is fixed at full wide angle.
• This function makes it possible to shoot images with a maximum angle of view of
15 mm or 19 mm. Note, however, that shooting conditions can result in a smaller
angle of view.
• The following conditions are not compatible with Wide Shot shooting.
– Subject whose brightness is very different from that of its surroundings due to
artificial light, sunlight, etc.
– Rivers, waves, waterfalls, or other subject with constantly changing patterns
– Sky, beach, or other subject with continuous patterns
– Camera too close to the main subject
– Moving subject
– Panning upwards on a skyscraper or some other very tall structure or object
– Dark surroundings
• Any of the following can cause Wide Shot operation to stop part way through.
– Subject or camera movement
– Camera movement that is too fast or too slow
– Camera movement outside of the required route
– Camera movement in the wrong direction
• Shooting a Wide Shot image after half-pressing the shutter button to perform Auto
Focus may not produce the desired results if there are considerable differences in
the brightness, color, and/or focus of the individual images. If this happens, try
changing the focus position by focusing on a different subject, etc.
• Since a Wide Shot image is created by joining multiple images together, there may
be some roughness at the point where two images are joined.
• Shooting under a flickering light source (such as fluorescent lighting) may result in
uneven brightness and/or coloring in the final Wide Shot image.
• The exposure and white balance when shooting Wide Shot images are fixed at the
levels measured when you half-press the shutter button at the beginning of the
operation.
• With this BEST SHOT scene, the flash setting automatically becomes ? (Flash
Off).
91
Using BEST SHOT
Shooting Snapshots (Snapshot)
This function adjusts exposure and shoots whenever the shutter button is halfpressed. This helps to ensure that you don’t miss the shots you want. This feature
comes in handy for daily shooting and when shooting natural scenery.
1.
In the BEST SHOT Mode, select “Snapshot” (page 77).
2.
Half-press the shutter button.
This will adjust exposure and shoot the snapshot.
• This will cause a pan focus distance value (PF –o.om–) to appear in the
upper left corner of the display. Everything from this distance and further will be
in focus.
NOTE
• The focus frame will not appear for this type of shot.
• The settings below are fixed while shooting with this function.
Focus Mode
Pan Focus
ISO Sensitivity
Auto
Make-up Level
0 (Off)
Flash
Flash Off
• An image shot with this function can be zoomed up to 1.3X.
• Proper focusing may not be possible if the camera is too close to the subject, or if
the camera is subjected to vibration or impact.
92
Using BEST SHOT
Shooting RAW Images (Raw Image)
You can configure the camera to save a RAW image* along with a standard JPEG
image when shooting snapshots. RAW image data is stored in a camera folder
named “RAW” (page 170).
* A RAW image is image data (file name extension .DNG) that is unprocessed
internally by the camera. Since there is no image deterioration, RAW files provide
more creative freedom when used with software that supports general-purpose
DNG format files.
1.
In the BEST SHOT Mode, select “Raw Image” (page 77).
2.
Press the shutter button to shoot.
NOTE
• The image size is fixed at 16M when shooting with this function.
• Single SR Zoom and Digital Zoom cannot be used with this function. Only optical
zoom can be used, up to a maximum zoom factor of 1.3X (34mm when converted
to 35mm film).
• Shooting of RAW image data is not supported for movie recording.
93
Using BEST SHOT
Using a TV Screen to Shoot Snapshots (HDMI TV Output)
Use the procedure below to configure the camera for shooting snapshots with an
aspect ratio of 16:9, as you compose them on a TV screen.
1.
Turn off the camera and use a commercially available HDMI cable to
connect the camera to a TV.
HDMI connector
HDMI input
HDMI output (micro)
HDMI cable
(commercially
available)
HDMI micro connector
2.
Turn on the camera.
3.
In the BEST SHOT Mode, select “HDMI TV Output” (page 77).
This will turn off the camera’s monitor screen and display an image composition
screen on the connected TV.
4.
Compose the image on the TV screen and press the shutter button to
shoot.
94
Using BEST SHOT
NOTE
• For details about connecting to the camera and precautions when connecting, see
page 124.
• If you want to change the digital video signal format, first unplug the HDMI cable
from the camera (page 126).
• The settings in the table below are fixed while shooting with this function.
Image Size
16:9
AF Area
Spot
Continuous AF
Off
Face Detection
Off
Make-up Level
0 (Off)
White Balance
Auto WB
Metering
Multi
95
Using BEST SHOT
Advanced Settings (REC MENU)
The following are menu operations you can use to configure various camera settings.
• You also can use the Control Panel (page 40) to configure some of the settings that
appear on the menu screen. Refer to the page references provided in this section
for information about configuring settings using the Control Panel.
Configuring Recording Settings
. Example Menu Screen Operation
1.
In the REC mode, press [MENU].
[8] [2] [4] [6]
This will display the menu screen (r REC
MENU).
• Menu contents are different in the REC mode
(r REC MENU) and PLAY mode (p PLAY
MENU).
2.
Press [4], use [8] and [2] to select the tab
where the menu item you want to configure
is located, and then press [6].
3.
Use [8] and [2] to select the menu item
you want, and then press [6].
• Operating the zoom controller displays the next
page of menu items.
4.
Use [8] and [2] to change the setting of
the selected menu item.
5.
After the setting is the way you want, press
[SET] to apply the setting and return to the
viewfinder screen.
[MENU]
[SET]
Example:
When “Self-timer” is
selected on the “r REC
MENU” tab
Tabs
• Pressing [MENU] cancels the current
selections and returns to the menu screen.
Items
• To display a different tab, press [MENU] to
move the blue boundary to the menu item and
then press [4]. Next use [8] and [2] to select
the tab you want, and then press [6].
• Pressing [Õ] (Continuous Shutter) interrupts the menu operation and exits the
menu screen.
NOTE
• Depending on the recording mode, some of the items on the menu that appears
may not be usable. While Premium Auto Pro is in use, only the menu items whose
settings can be configured will be displayed on the menus.
96
Advanced Settings (REC MENU)
. Menu Operations in This Manual
Menu operations are represented in this manual as shown below. The following
operation is the same as the one described under “Example Menu Screen Operation”
on page 96.
Press [4] and then use [8] and [2] to select the
“r REC MENU” tab, and then press [SET].
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab *
Self-timer
Press [MENU].
Use [8] and [2] to select “Self-timer” and
then press [6].
Using a Smartphone as a Camera Remote Controller
(Remote Capture)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab *
Remote Capture
See page 147 for details.
Triggering a Self-timer Operation with Motion (Motion Shutter)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab *
Motion Shutter
With this feature, you can configure the camera to
shoot an image when it detects movement in the
vicinity of an icon on the monitor screen.
Setting
Description
1 sec
Image is shot one second after
movement is detected.
0.5 sec
Image is shot 0.5 seconds after
movement is detected.
Off
Motion Shutter disabled.
1.
Use [8] [2] to select “1 sec” or “0.5 sec”, and then press [SET].
97
Advanced Settings (REC MENU)
2.
Select one of the following as the recording mode: Program Auto,
Premium Auto Pro, or HS Best Selection (BEST SHOT scene).
• Movie shooting is disabled while the HS Best Selection BEST SHOT scene is
being used.
3.
Press the shutter button (if you want to shoot a snapshot) or
[0] (Movie) (if you want to shoot a movie).
The start self-timer icon will change to “
standby for shooting.
4.
” to indicate that the camera is in
Facing the camera, move your hand or perform some other movement
in the vicinity of the
(start self-timer) icon on the monitor screen.
When the camera detects movement near the icon, it will automatically shoot an
image.
• To stop movie recording, press [0] (Movie) again.
NOTE
• In the case of snapshot shooting, the camera will return to standby after an image
is shot. The camera will automatically exit standby after 30 snapshots are shot
using the Motion Shutter.
• Pressing the shutter button will automatically exit standby.
• The Motion Shutter may not operate properly when there is little difference
between the subject and the background of the icon, or when the subject is located
far away from the camera.
• “O Tracking” cannot be selected for the AF area setting while shooting with the
Motion Shutter. If “O Tracking” is selected in another mode, selecting the Motion
Shutter will cause the AF area setting to change to “U Spot”.
• You cannot shoot a snapshot by pressing the shutter button while movie recording
is in progress (Snapshot In Movie).
Repositioning the Motion Detection Area (Motion Position)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab *
Motion Position
Use the procedure below to reposition the
while shooting with the Motion Shutter.
(Start self-timer) icon that will appear
1.
Use [8], [2], [4], and [6] to reposition the currently selected icon.
2.
When the icon is located where you want, press [SET].
98
Advanced Settings (REC MENU)
Assigning Functions to the Control Dial (Control Dial)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab * Control Dial
You can assign any one of the four functions below to the control dial. After you do,
you can change the setting of the function by rotating the control dial.
Setting
Description
EV Shift
Brightness compensation (page 48)
White Balance
Hue adjustment (page 42)
Self-timer
Self-timer time setting (page 41)
MF*
Focus adjustment (page 44)
Off
No setting assigned to the control dial
* Configure the settings below in order to directly adjust focus with the control dial.
Face Detection: Off
Make-up Level: 0 (Off)
Focus Mode: MF (Manual Focus)
NOTE
• Depending on the recording mode, some functions may not be assignable to the
control dial.
99
Advanced Settings (REC MENU)
Assigning Functions to the [4] and [6] Keys (L/R Key)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab * L/R Key
You can select from among the functions described below and assign one to the [4]
and [6] keys (Key Customize). After you do, you can select either of the functions by
pressing the [4] or [6] key.
Setting
[4]/[6] key operation
AF Area
Specifying the Auto Focus Area (page 109)
Metering
Changes the Metering Mode (page 51)
Face Detection
Turns face detection on and off (page 108)
ISO
Changes the ISO Sensitivity setting (page 46)
ISO High Limit
Specifying ISO Sensitivity Upper Limit (page 105)
Off
Cancels [4] and [6] key assignments
Saving a Second Normal Image When Shooting With HDR Art
(Double (HDR ART))
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab *
Double (HDR Art)
See page 62 for details.
100
Advanced Settings (REC MENU)
To select the snapshot image size (Image Size)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab * Image Size
Image Size
(Pixels)
REC Screen
Icon Display
Suggested
Print Size and
Application
Description
16M
(4608x3456)
Poster Print
3:2
(4608x3072)
Poster Print
16:9
(4608x2592)
HDTV
10M
(3648x2736)
Poster Print
5M
(2560x1920)
A4 Print
3M
(2048x1536)
3.5"×5" Print
Best when preserving memory
capacity is relatively more important
than image quality.
VGA
(640x480)
E-Mail
Image files are smaller, which is
better when attaching images to
e-mail. However, images are
relatively coarser.
Good detail for better clarity even for
images cropped (page 140) from the
original
Good detail
• The initial factory default image size setting is “16M”.
• Selecting “3:2” records images with an aspect ratio of 3:2, which matches the
standard aspect ratio of print paper.
• The letters “HDTV” stand for “High Definition Television”. An HDTV screen has an
aspect ratio of 16:9, which makes them wider than the usual 4:3 aspect ratio of
television screens of the past. Your camera can record images that are compatible
with the aspect ratio an HDTV screen.
• You should regard the print paper sizes suggested here as guidelines only (200 dpi
print resolution).
101
Advanced Settings (REC MENU)
• Available image sizes are limited for some functions as noted below.
16M
This image size cannot be selected when using “HS Night Shot”.
Selecting “16M” in another mode and then switching to “HS Night Shot”
will cause the image size to change to “10M” automatically.
3:2,
16:9
These image sizes cannot be selected when using “High Speed CS” or
“HS Night Shot”. Selecting “3:2” or “16:9” in another mode and then
switching to “High Speed CS” will cause the image size to change to
“16M” automatically. In the case of “HS Night Shot”, the image size will
change to “10M” automatically.
. Pixels and image size
A digital camera image is a collection of small
dots called “pixels”. The more pixels there are
in an image, the more detail there will be.
However, you generally can do with fewer
pixels when printing an image (L size) through
a print service, attaching an image to e-mail,
when viewing the image on a computer, etc.
The size of an image indicates how many
pixels it contains, and is expressed as
horizontal pixelsxvertical pixels.
Pixel
Example:
Image size
Pixels
16M
4608x3456 (Approximately 16 million pixels)
3M
2048x1536 (Approximately 3 million pixels)
• Note that larger images have more pixels, so they take up more memory space.
• For information about image size, image quality, and number of images that can be
stored, see page 210.
• For information about movie image size, see page 103.
• For information about resizing existing snapshots, see page 140.
102
Advanced Settings (REC MENU)
Specifying Snapshot Image Quality (Image Quality)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab *
Image Quality
REC Screen Icon
Description
Display
Setting
Fine
Gives image quality priority.
Normal
Normal
• The “Fine” setting helps to bring out details when shooting a finely detailed image
of nature that includes dense tree branches or leaves, or an image of a complex
pattern.
• Memory capacity (the number of images you can record) will be affected by the
quality settings you configure (page 210).
Movie Image Quality Settings (Movie Quality)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab *
Movie Quality
This setting can be used to configure movie image quality settings and to select either
normal movie recording or High Speed Movie recording.
Settings
(Quality
(pixels))
FHD
HD
REC Screen Approximate Data Rate
Description
Icon Display (Frame Rate)
14.2 Megabits/second
(30 frames/second)
Select this setting record highdefinition (FHD) movies (page 69).
The aspect ratio of movies
recorded with this setting is 16:9.
10.9 Megabits/second
(15, 20, 30 frames/
second)
Select this setting record highdefinition (HD) movies. The
aspect ratio of movies recorded
with this setting is 16:9.
• “HD” can be selected in place of
“FHD” only when shooting with
ART SHOT (page 60) or a Time
Lapse (page 73) ART SHOT
scene. The frame rate depends
on the scene.
103
Advanced Settings (REC MENU)
Settings
(Quality
(pixels))
REC Screen Approximate Data Rate
Description
Icon Display (Frame Rate)
STD
3.9 Megabits/second
(30 frames/second)
HS1000
40.0 Megabits/second
(1000 frames/second)
HS480
40.0 Megabits/second
(480 frames/second)
HS240
40.0 Megabits/second
(240 frames/second)
HS120
40.0 Megabits/second
(120 frames/second)
HS30-240
5.4 Megabits/second
(30 frames/second)
40.4 Megabits/second
(240 frames/second)
HS30-120
10.4 Megabits/second
(30 frames/second)
40.4 Megabits/second
(120 frames/second)
Use this setting for standard
movie recording. Recording with
this setting is performed using an
aspect ratio of 4:3.
The image size of movies
recorded with this mode depends
on the frame rate (recording
speed (page 69)).
Specifying ISO Sensitivity (ISO)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab * ISO
For details, see the Control Panel procedure on page 46.
104
Advanced Settings (REC MENU)
Specifying the ISO Sensitivity Upper Limit (ISO High Limit)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab *
ISO High Limit
Settings
Auto
REC Screen
Icon Display
None
Description
Shoots using the ISO sensitivity setting specified by the
“ISO Sensitivity” setting (page 46).
ISO 200
ISO 400
ISO 800
ISO 1600
The setting selected here becomes the ISO sensitivity
upper limit when “Auto” is selected for the “ISO
Sensitivity” setting (page 46).
ISO 3200
NOTE
• When the “ISO Sensitivity” setting (page 46) is something other than “Auto”, the
“ISO High Limit” setting is ignored, and shooting is performed using the option
selected for the “ISO Sensitivity” setting.
• The settings available for “ISO High Limit” become as shown below when shooting
with “HS Night Shot” (page 81).
Auto, ISO 1600, ISO 3200, ISO 6400, ISO 12800, ISO 25600
• The “ISO High Limit” setting cannot be configured while any one of the recording
mode below is in use.
Premium Auto Pro, M mode, some BEST SHOT scenes
• The “ISO 3200” setting cannot be selected while the Multi SR Zoom REC mode is
selected. If “ISO 3200” is selected in another REC mode, switching to Multi SR
Zoom causes the REC mode to change to “ISO 1600”.
105
Advanced Settings (REC MENU)
Reducing the Effects of Camera and Subject Movement
(Anti Shake)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab * Anti Shake
You can turn on the camera’s Anti Shake feature to reduce image blur due to subject
movement or camera movement when shooting a moving subject using telephoto,
when shooting a fast-moving subject, or when shooting under dim lighting conditions.
Settings
REC Screen
Icon Display
Description
Strong
While applying hand shake correction, shutter speed
faster than “Standard” also further reduces subject
blur. Also, ISO sensitivity may be raised from
“Standard”.
This setting can be used while the recording mode is
Program Auto (except for High Speed CS), Premium
Auto Pro or HS Anti Shake.
Standard
Dramatically reduces the effects of hand and subject
movement.
Off
None
Turns off Anti Shake settings.
NOTE
• Only camera shake correction can be used during FHD and STD movie recording.
• Anti Shake correction is not supported during High Speed Movie, HDR Art Movie
recording or Time Lapse.
• When Anti Shake is enabled and “Auto” is selected for “ISO” (page 46), ISO
sensitivity, aperture, and shutter speed will not appear on the monitor screen when
you half-press the shutter button. These values will appear in the display of the
image immediately after it is shot.
• Shooting with Anti Shake enabled can cause an image to appear somewhat
coarser than normal and can cause slight deterioration of image resolution.
• Anti Shake may not be able to eliminate the effects of camera or subject movement
when movement is severe.
• Anti Shake may not work properly when the camera is mounted on a tripod. Turn
off Anti Shake.
• Even if “Strong” is selected for the Anti Shake setting, some shooting conditions
may make it impossible to achieve the desired Anti Shake results.
106
Advanced Settings (REC MENU)
Zooming with Super Resolution (Zoom (SR))
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab * Zoom (SR)
See page 55 for details.
Turning Digital Zoom On or Off (Digital Zoom)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab *
Digital Zoom
Select “On” when you want to use digital zoom (page 52).
• Digital zoom is disabled while shooting with the following feature.
– High speed movie recording, Some BEST SHOT scenes, Interval Shot
Selecting a Focus Mode (Focus)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab * Focus
For details, see the Control Panel procedure on page 44.
107
Advanced Settings (REC MENU)
Shooting with Face Detection (Face Detection)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab *
Face Detection
When shooting people, the face detection feature detects the faces of up to ten
individuals and adjusts focus and brightness accordingly.
1.
Use [8] and [2] to select “On” and then press [SET].
2.
Point the camera at the subject(s).
The camera will detect human faces and display a
frame around each one.
3.
Half-press the shutter button.
The camera will focus and the frames around the
faces it focuses on will turn green.
4.
Press the shutter button the rest of the way down.
Tips for Best Face Detection Results
• The camera performs center focus if it cannot detect a face.
• Always make sure that Auto Focus (AF) is selected as the focus mode when
shooting with face detection.
• Detection of the following types of faces is not supported.
– A face that is obstructed by hair, sunglasses, a hat, etc., or a face in dark shade
– A profile or a face that is at an angle
– A face that is very far away and small, or very close and large
– A face in an area that is very dark
– A face of a pet or some other non-human subject
IMPORTANT!
• Face detection cannot be used in combination with any of the following features.
– Some BEST SHOT scenes
– Some ART SHOT scenes
– Movie Mode (Including some BEST SHOT scenes that support High Speed
Movie recording)
– High Speed CS with Prerecord CS (Including some BEST SHOT scenes that
support High Speed CS recording)
• The “Focus” setting is always fixed at “AF” (Auto Focus) whenever “Face
Detection” is being used. If you want to change the “Focus” setting, first select “Off”
for “Face Detection”.
108
Advanced Settings (REC MENU)
Specifying the Auto Focus Area (AF Area)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab * AF Area
You can use the following procedure to change the Auto Focus metering area for
shooting snapshots.
• When recording movies, the AF metering area is always “U Spot”.
Settings
Description
š Intelligent
The camera automatically determines the focus point on the
screen and focuses there (intelligent AF).
• Face detection (page 108) operates automatically.
U Spot
This mode takes readings of a small area in the center of the
image. This setting works well with focus lock (page 45).
I Multi
When you half-press the shutter button while this setting selected,
the camera will select the optimum Auto Focus area from among
nine possible areas. The focus frame of the area where the
camera focuses will be displayed in green.
O Tracking
When you half-press the shutter button while this setting is
selected, the focus frame will follow the movement of the subject.
“š Intelligent”
“U Spot” or “O Tracking”
“I Multi”
Focus frame
Focus frame
Focus frame
IMPORTANT!
• Auto Focus is disabled when “MF” (Manual Focus) is selected for the focus mode
(page 44), even if you select an AF area.
• Selecting “O Tracking” can cause vibration and noise to occur due to lens
operation while tracking a subject. This does not indicate malfunction.
• With some BEST SHOT scenes, there are restrictions on the use of AF area
settings. Because of this, you may not be able to use certain settings or you may
not be able to specify any AF Area setting.
• While Face Detection (page 108) is turned on, regardless of the current AF Area
setting, “U Spot” (center) focusing will be used automatically whenever a face
cannot be detected for some reason.
109
Advanced Settings (REC MENU)
Recording Beautiful Portraits (Make-up Level)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab *
Make-up Level
For details, see the Control Panel procedure on page 47.
Shooting with Continuous Auto Focus (Continuous AF)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab *
Continuous AF
When shooting a snapshot while “On” is selected for Continuous AF, Auto Focus is
performed and focusing is continually updated until you half-press the shutter button.
• Before you half-press the shutter button, the camera focuses at the center of the
screen. If “Face Detection” is turned on when you half-press the shutter button,
focusing is performed in the area where a face is detected.
• Shooting with Continuous AF can cause vibration and noise to occur due to lens
operation. This does not indicate malfunction.
Optimizing Image Brightness (Lighting)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab * Lighting
You can use this setting to optimize the balance between bright areas and dark areas
when shooting images.
Settings
Description
On
Performs brightness correction. When this option is selected, it
takes longer for the image to be stored after the shutter button is
pressed.
Off
Does not perform brightness correction.
NOTE
• Lighting is disabled during movie recording.
110
Advanced Settings (REC MENU)
Reducing Wind Noise during Movie Recording
(Wind Noise Cut)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab *
Wind Noise Cut
Select “On” to reduce wind noise during movie recording. Note, however, that this will
also cause the sound quality to change.
Correcting Image Brightness (EV Shift)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab * EV Shift
For details, see the Control Panel procedure on page 48.
Adjusting White Balance (White Balance)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab *
White Balance
For details, see the Control Panel procedure on page 42.
Using the Self-timer (Self-timer)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab * Self-timer
For details, see the Control Panel procedure on page 41.
Specifying the Metering Mode (Metering)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab * Metering
For details, see the Control Panel procedure on page 51.
111
Advanced Settings (REC MENU)
Specifying Flash Intensity (Flash Intensity)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab *
Flash Intensity
You can specify flash intensity to one of five levels from +2 (brightest flash) to –2
(least bright flash).
• Flash intensity may not change when the subject is too far away or too close.
Controlling Image Sharpness (Sharpness)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab * Sharpness
You can specify one of five sharpness settings from +2 (sharpest) to –2 (least sharp).
Controlling Color Saturation (Saturation)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab * Saturation
You can specify one of five saturation settings from +2 (most saturated) to –2 (least
saturated).
Adjusting Image Contrast (Contrast)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab * Contrast
You can specify one of five contrast settings from +2 (most contrast between light and
dark) to –2 (least contrast between light and dark).
112
Advanced Settings (REC MENU)
Using the Auto Focus Assist Light (AF Assist Light)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab *
AF Assist Light
Half-pressing the shutter button while this setting is selected
causes the front lamp to light, which provides illumination for
focusing in areas where lighting is dim. Leaving this function
turned off is recommended when shooting portraits from short
distances, etc.
Front lamp
IMPORTANT!
• Never look directly into the front lamp while it is lit.
• Make sure your finger is not covering the front lamp.
Turning on Image Review (Review)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab * Review
While Review is turned on, the camera will display an image for about one second
immediately after it is recorded.
Type 1
Displays a full-screen view of the image.
Type 2, Type 3
Displays a partial-screen view of the image. The difference
between Type 2 and Type 3 is the way the image appears on
the display.
Off
Turns off review image display
• When shooting with some functions while “Type 1” is selected for “Review” will
cause the message “Busy... Please wait...” to appear after you press the shutter
button. Shooting another image is disabled while this message is displayed. Wait a
while until the process being performed is complete.
• The Review image may not appear when shooting with some recording modes.
• When shooting with “High Speed CS”, “AF-CS”, or “Triple Shot”, the Review image
is displayed as “Type 2” if “Type 1” is selected as the Review image type.
• Shooting an “ART SHOT” image while “On” is selected for the “Double (HDR Art)”
setting and Review is enabled will cause both the “ART SHOT” image and the
normal image to be displayed as the Review image.
113
Advanced Settings (REC MENU)
Using Icon Help (Icon Help)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab * Icon Help
While Icon Help is turned on, a textual description will appear on the display for
certain icons when you switch between REC functions.
Functions Supported by Icon Help
• Recording mode
• Available options for the “L/R Key” and “Control Dial” settings
• Exposure warning when shutter button is half-pressed
Changing the Monitor Screen when Recording (Shooting Info)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab *
Shooting Info
You can use the above procedure to display a grid or histogram, or the movie
shooting range on the monitor screen during recording.
Grid
Selecting “On” for this setting displays
grid lines on the monitor screen. The
grid lines provide references that help
you keep the camera vertically and
horizontally straight.
Selecting “On” for this setting displays a
histogram on the monitor screen. This
histogram lets you view exposure
information while shooting.
Histogram
Histogram
NOTE
• Use of the flash and certain shooting conditions can cause the
histogram to indicate exposure that is different from the actual
exposure of the image when it is shot.
• The histogram cannot be displayed during high speed movie
recording.
114
Advanced Settings (REC MENU)
Movie Range
Selecting “On” for this setting
displays a semitransparent gray
frame on the monitor screen. The
area within the frame is what is
recorded as the movie.
Semi-transparent gray
frame
. How to Use the Histogram
A histogram is a graph that represents the lightness of an image in terms of the
number of pixels. The vertical axis indicates the number of pixels, while the horizontal
axis indicates lightness. If the histogram appears too lopsided for some reason, you
can use EV shift to move it left or right in order to achieve better balance. Optimum
exposure can be achieved by EV shifting so the graph is as close to the center as
possible. For snapshots, you can even display individual histograms for R (red),
G (green), and B (blue).
Example Histograms
A histogram towards the left side results when the
overall image is dark. A histogram that is too far to
the left may result in “black out” of the dark areas
of an image.
A histogram towards the right side results when
the overall image is light. A histogram that is too
far to the right may result in “white out” of the light
areas of an image.
An overall well-balanced histogram results when
the overall image is at optimal lightness.
NOTE
• A centered histogram does not necessarily guarantee optimum exposure. The
recorded image may be over-exposed or under-exposed, even though its
histogram is centered.
• Due to the limitations of exposure compensation, you may not be able to achieve
an optimum histogram configuration.
115
Advanced Settings (REC MENU)
Configuring Power On Default Settings (Memory)
Procedure
Enter the REC Mode * [MENU] * “r REC MENU” Tab * Memory
This setting lets you specify which camera settings should be remembered by the
camera when it is turned off, and restored the next time the camera is turned on. To
have the camera remember a setting, you should enable the setting’s memory. Any
setting whose memory is disabled will be reset to its initial default any time the
camera is turned off.
Setting
Disabled (Initial Default Setting)
High Speed CS
Off
Flash
Auto
Focus
AF
ISO
Auto
White Balance
Auto WB
EV Shift
0.0
AF Area
Spot
Metering
Multi
Self-timer
Off
Flash Intensity
Zoom (SR)
Single
Enabled
Setting at
power off
Digital Zoom
On
MF Position
Position before manual focus was selected.
Zoom Position*
Full wide
* Optical zoom setting only.
116
Advanced Settings (REC MENU)
Viewing Snapshots and Movies
Viewing Snapshots
See page 34 for the procedure for viewing snapshots.
Viewing a Movie
1.
Press [p] (PLAY) and then use [4] and [6] to display the movie you
want to view.
2.
Press [SET] to start playback.
Movie icon: »/» (Time Lapse)
Recording time
Image quality
Movie Playback Controls
Fast forward/fast
reverse
[4] [6] (Playback in progress.)
• Each press of either button increases the speed of the
fast forward or fast reverse operation.
• To return to normal playback speed, press [2].
Play/pause
[SET]
1 frame forward/
back
[4] [6] (Playback paused.)
• Holding down either button scrolls continuously.
Volume adjustment
Press [2] and then press [8] [2]
• Volume can be adjusted only while movie playback is in
progress.
Information display
on/off
[8] (DISP)
Change to normal
playback speed
during high speed
movie playback
[0] (Movie)
• Press [0] (Movie) again to return to the slow playback
speed. This operation is not supported when playing a
movie shot with “HS30-120” or “HS30-240”.
Zoom
Rotate the zoom controller in the direction of z ([).
• You can use [8], [2], [4], and [6] to scroll the zoomed
image on the monitor screen. You can zoom a movie
image up to 4.5 times normal size.
Stop playback
[MENU]
• Playback may not be possible for movies not recorded with this camera.
117
Viewing Snapshots and Movies
• A movie that has been rotated using “Rotation” (page 139) or “Auto Rotate” (page
175) cannot be zoomed.
Viewing a Panorama Image
1.
Press [p] (PLAY), and then use [4] and [6] to
display the panorama images you want to
view.
2.
Press [SET] to start playback of the panorama.
Panorama playback causes the image to scroll left,
right, up, or down.
Playback Controls
To start or pause
playback
[SET]
To advance scroll
while paused
[4] [6] (When the slide direction is left or right.)
[8] [2] (When the slide direction is up or down.)
• Holding down any button scrolls continuously.
To hide or show
display information
[8] (DISP)
To stop playback
[MENU]
• The following functions cannot be performed on a panorama image.
MOTION PRINT, Movie Editing, Trimming, Resize, Lighting, White Balance,
Brightness, Rotation
118
Viewing Snapshots and Movies
Viewing Continuous Shutter Images
Each time you shoot with continuous shutter (CS) or Interval Shot, the camera
creates a group that includes all of the images for that particular session. You can use
the following procedure to play back the images in a particular group.
1.
Press [p] (PLAY) and then use [4] and [6] to display the group
whose images you want to view.
Number of image files in the group
Group icon
Interval *
Interval Shot icon *
First image in the group
* Displayed when the image was shot using “Interval Shot”.
2.
Press [SET] to start playback.
Current image number/number of images in the group
CS speed*
Playback guide
* Displayed when the image was shot using “High Speed CS”.
119
Viewing Snapshots and Movies
Playback Controls
[4] [6]
During playback, changes the playback direction and playback
speed.
While playback is paused, scrolls forward or back.
• Playback speed cannot be adjusted while the displayed image is
zoomed.
[SET]
Toggles between pause and play.
Zoom
controller
Zooms the image.
• You can use [8], [2], [4], and [6] to scroll the zoomed image
on the monitor screen.
• Rotating the zoom controller towards w (]) while an image is
not zoomed will display a menu of images in the current CS
group.
[MENU]
Exits group playback.
[8] (DISP)
Cycles through information display formats.
[2]
Displays the “Edit Group” menu.
Deleting Continuous Shutter Images
You can use the following procedures to delete images while playback is in progress
or paused.
. Deleting a Specific Group File
1.
While CS or interval shot group playback is in progress or paused,
press [2].
This will display the “Edit Group” menu.
2.
Use [8] and [2] to select “Delete” and then press [SET].
3.
Use [4] and [6] to display the image you want to delete.
4.
Use [8] and [2] to select “Delete” and then press [SET].
• To delete other files, repeat steps 3 and 4.
• To exit the delete operation, press [MENU].
120
Viewing Snapshots and Movies
. Deleting Multiple Files in a Group
1.
While CS or interval shot group playback is in progress or paused,
press [2].
This will display the “Edit Group” menu.
2.
Use [8] and [2] to select “Delete” and then press [SET].
3.
Use [8] and [2] to select “Delete Frames” and then press [SET].
This displays a file selection screen.
4.
Use [8], [2], [4], and [6] to move the selection boundary to the file
you want to delete, and then press [SET].
• This will select the check box in the lower left corner of the selected file’s image
and move the blue boundary to the next image.
• You can enlarge the selected image before deleting it by rotating the zoom
controller towards z ([).
5.
Repeat step 4 to select other files, if you want. After you are finished
selecting files, press [MENU].
6.
Use [8] and [2] to select “Yes” and then press [SET].
• This deletes the files you selected.
• To cancel the delete operation, select “No” in step 6 and then press [SET].
. Deleting All Files in a Group
1.
While CS or interval shot group playback is in progress or paused,
press [2].
This will display the “Edit Group” menu.
2.
Use [8] and [2] to select “Delete” and then press [SET].
3.
Use [8] and [2] to select “Del Group Images” and then press [SET].
4.
Use [8] and [2] to select “Yes”, and then press [SET].
121
Viewing Snapshots and Movies
Dividing Up a Group
Use the following to divide up a Group into individual images.
. Dividing Up a Specific Group
1.
In the PLAY mode, press [MENU].
2.
Press [4], use [8] and [2] to select the “p PLAY MENU” tab, and
then press [SET].
3.
Use [8] and [2] to select “Divide Group” and then press [6].
4.
Use [8] and [2] to select “Select File”, and then press [SET].
5.
Use [4] and [6] to display the group you want to divide up.
6.
Use [8] and [2] to select “Divide” and then press [SET].
• To divide up other group files, repeat steps 5 and 6.
. Dividing Up All Groups
IMPORTANT!
• Once a group is divided, it cannot be regrouped.
1.
In the PLAY mode, press [MENU].
2.
Press [4], use [8] and [2] to select the “p PLAY MENU” tab, and
then press [SET].
3.
Use [8] and [2] to select “Divide Group” and then press [6].
4.
Use [8] and [2] to select “All Files” and then press [SET].
5.
Use [8] and [2] to select “Yes”, and then press [SET].
122
Viewing Snapshots and Movies
Copying a Group Image
Use the following procedure to copy an image in a group to a location outside of the
group.
1.
While CS or interval shot group playback is in progress or paused,
press [2].
This will display the “Edit Group” menu.
2.
Use [8] and [2] to select “Copy”, and then press [SET].
3.
Use [4] and [6] to display the image you want to copy.
4.
Use [8] and [2] to select “Copy”, and then press [SET].
NOTE
• The functions below cannot be performed on snapshots inside a group. Before
using either of these functions, perform the above procedure to copy the image
first.
White Balance, Brightness, Trimming, Rotation, Resize
Zooming an On-screen Image
1.
In the PLAY mode, use [4] and [6] to scroll through the images until
the one you want is displayed.
2.
Rotate the zoom controller towards z ([) to
zoom.
You can use [8], [2], [4], and [6] to scroll the zoomed
image on the monitor screen. Rotate the zoom controller
towards w to unzoom the image.
– When monitor screen contents are turned on, a
graphic in the lower right corner of the screen
shows what part of the zoomed image is currently
displayed.
– To exit the zoom screen, press [MENU].
– Though the maximum image zoom factor is 8X,
certain image sizes may not allow zooming up to
the full 8X.
123
Zoom factor
Image area
Current display area
Viewing Snapshots and Movies
• Pressing [SET] will lock the current zoom factor for the on-screen image. You
can then use [4] and [6] to scroll between images, using the same zoom
factor. Pressing [SET] again will unlock the zoom factor and allow you to use
[8], [2], [4] and [6] to move around the currently displayed images. This
function cannot be used while viewing CS group images or movies. Also, CS
group images and movies will not appear when you are scrolling images with
[4] and [6].
Displaying the Image Menu
1.
In the PLAY mode, rotate the zoom controller
towards w (]).
Boundary
Use [8], [2], [4] and [6] to move the selection
boundary around the image menu.
To view a particular image, use [8], [2], [4], or [6] to
move the selection boundary to the image you want and
then press [SET].
• In the case of a movie or a continuous shutter (CS)
file, the first frame of the file will be displayed.
• A question mark (?) will be displayed for images that cannot be displayed for
some reason.
Viewing Snapshots and Movies on a TV Screen
1.
Use a commercially available HDMI
cable to connect the camera to the
TV.
• Use a commercially available HDMI
cable that is marked with the logo shown to the right.
• Make sure that the camera is turned off before plugging in or unplugging the
cable. Check the user documentation that comes with the TV for information
about requirements before plugging into or unplugging from the TV.
124
Viewing Snapshots and Movies
HDMI connector
HDMI input
HDMI output (micro)
HDMI cable
(commercially
available)
HDMI micro connector
IMPORTANT!
• Output to a TV is not supported while the camera is in the REC mode except for
“HDMI TV Output” (page 94).
2.
Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is
connected.
3.
Turn on the camera and press [p] (PLAY).
This will cause an image to appear on the TV screen, without anything appearing
on the camera’s monitor screen.
4.
Now you can display images and play back movies as you normally do.
IMPORTANT!
• Audio is initially output by the camera at maximum volume. When you first start
displaying images, set the TV volume control at a relatively low level and then
adjust it as required.
NOTE
• Use a HDMI cable that with a plug that is compatible with the camera’s HDMI micro
connector on one end, and a plug that is compatible with your TV’s HDMI
connector on the other end.
• Proper image and/or audio output and other operations may not be possible with
some devices.
• Connecting the camera to the HDMI connector of another device can damage both
the camera and the other device. Never connect two HDMI output connectors to
each other.
• Disconnect the HDMI cable when you are not using HDMI output. The camera’s
monitor screen may not operate normally while the HDMI cable is connected.
• Audio is stereo.
125
Viewing Snapshots and Movies
. Selecting the HDMI Terminal Output Method (HDMI Output)
Procedure
[MENU] * “¥ SETTING” Tab * HDMI Output
Use this setting to select the digital signal format when connecting to a TV with an
HDMI cable.
Auto
This setting will cause the format to change automatically in accordance
with the connected TV. Normally, you should use this mode.
1080i
1080i format output*
480p
480p format output
576p
576p format output
* 1080i corresponds to 1080 60i, but not 1080 50i. Because of this, the required
output method may be 576p when outputting to a digital TV in a PAL reception area
that does not support 1080i 60i. If you are in a PAL reception area and nothing is
displayed automatically, change the setting to 576p.
• If an image does not appear when “Auto” is selected as the output method, try
changing this setting to something else.
IMPORTANT!
• The “HDMI Output” setting cannot be changed as long as there is an HDMI cable
connection between the camera and a TV. Disconnect the HDMI cable from the
camera to change the “HDMI Output” setting.
126
Viewing Snapshots and Movies
Other Playback Functions (PLAY MENU)
This section explains menu items that you can use to configure settings and perform
other playback operations.
For information about menu operations, see page 96.
Assigning the Quick Send Function to
the [Õ] (Continuous Shutter) Button (Quick Send)
Procedure
[p] (PLAY) * [MENU] * “p PLAY MENU” Tab * Quick Send
While “Send by HS Key” is selected, pressing [Õ] (Continuous Shutter) in the PLAY
mode will send the image displayed on the camera's monitor screen to a smartphone.
Sending a Snapshot or Movie File from Camera Memory to a
Smartphone (Send to phone)
Procedure
[p] (PLAY) * [MENU] * “p PLAY MENU” Tab * Send to phone
See page 151 for details.
Viewing Snapshots and Movies in Camera Memory on a
Smartphone (View on phone)
Procedure
[p] (PLAY) * [MENU] * “p PLAY MENU” Tab * View on phone
See page 154 for details.
127
Other Playback Functions (PLAY MENU)
Specifying the Control Dial Image Scroll Method
(Control Dial)
Procedure
[p] (PLAY) * [MENU] * “p PLAY MENU” Tab * Control Dial
You can specify either of two scrolling methods for the control dial: scrolling by one or
more images, or scrolling by date.
Setting
Description
1 image
10 images
25 images
Scrolls forward or back by the specified number of images.
50 images
100 images
Date
Scrolls images by recording date.
NOTE
• Pressing [4] or [6] will scroll images one-by-one.
Playing a Slideshow on the Camera (Slideshow)
Procedure
[p] (PLAY) * [MENU] * “p PLAY MENU” Tab * Slideshow
Start
Starts the slideshow
Images
Specifies the type of images to be included in the slideshow
All images: Snapshots, movies, continuous shutter images
All except Z: All non-continuous shutter (CS) images
T Only: Snapshots only
» Only: Movies only
» Only: Timelapse only
Time
Time from the start to the end of the slideshow
3 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes
128
Other Playback Functions (PLAY MENU)
Interval
Amount of time each image remains displayed
Use [8] and [2] to select one of the following settings: 1, 3, 5, 10, 15, 20, or
30 seconds, or “MAX”.
If you specify a value other than “MAX”, movies play from beginning to end.
When the slideshow reaches a movie file while “MAX” is selected, only the first
frame of the movie will be displayed.
Effect
Select the effect you want.
Pattern 1 to 5: Plays background music and applies an image change effect.
• Patterns 2 through 4 have different background music, but they all use the
same image change effect.
• Pattern 5 can be used for playback of snapshots only (except for those that
are part of a CS group), and the “Interval” setting is ignored.
• Snapshots that are part of a group are displayed the same as those shot with
the single shot mode, and not as a group.
• The currently selected image change effect setting is disabled automatically
in following cases.
– When playing a slideshow for which “» Only” or “» Only” is selected for
the “Images” setting
– When the interval setting is “MAX” or 1 second
– Before and after playback of a movie
Off: No image change effect or background music
• To stop the slideshow, press [SET] or [MENU]. Pressing [MENU] stops the
slideshow and returns to the menu screen.
• Adjust audio volume by pressing [2] and then press [8] or [2] during playback.
• All button operations are disabled while the slideshow is transitioning from one
image to another.
• The time required for transition from one image to another may be longer in the
case of an image that was not recorded with this camera.
129
Other Playback Functions (PLAY MENU)
Transferring Music from Your Computer to Camera Memory
You can replace the built-in slideshow background music with other music from your
computer.
Supported File Types:
• PCM format (16-bit, monaural / stereo) WAV files
• Sampling Frequencies: 11.025 kHz/22.05 kHz/44.1 kHz
Number of Files: 9
File names: SSBGM001.WAV to SSBGM009.WAV
• Create the music files on your computer using the above names.
• Regardless of which effect pattern you select, the music files you store in camera
memory are played back in name sequence.
1.
Connect the camera to your computer (pages 162, 166).
If you plan to save the music files to the camera’s memory card, make sure the
card is loaded in the camera.
2.
Perform one of the following operations to open the memory card or
built-in memory.
This will cause the camera to be recognized by your computer as a Removable
Disk (Drive).
• Windows
1Windows 8, 8.1: Desktop * Explorer
Windows 7, Windows Vista: Start * Computer
2Double-click “Removable Disk”.
• Macintosh
1Double-click the camera’s drive icon.
3.
Create a folder named “SSBGM”.
4.
Double-click the “SSBGM” folder you created and copy the
background music file to it.
• See the user documentation that comes with your computer for information
about moving, copying, and deleting files.
• If there are background music files both in built-in memory and on the memory
card loaded in the camera, the files on the memory card take priority.
• See page 170 for information about camera folders.
5.
Disconnect the camera from the computer (pages 163, 166).
130
Other Playback Functions (PLAY MENU)
Using Snapshots to Create a Movie (Make Movie)
Procedure
[p] (PLAY) * [MENU] * “p PLAY MENU” Tab * Make Movie
You can use the procedure below to convert snapshots shot with this camera to a
movie. Selecting a group will include all of the images in the group in one movie. You
can use up to 1,000 snapshots in a movie.
1.
Use [8], [2], [4], and [6] to select the image you want and then press
[SET].
• Selecting a group and pressing [SET] will select all of the images in the group
for inclusion in the movie.
• To view a particular image, rotate the zoom controller.
2.
Press [MENU].
3.
Use [8] and [2] to select the playback speed and then press [SET].
This creates a movie using the selected snapshots.
NOTE
• RAW images cannot be included in a movie.
• Movie image quality depends on the size of the snapshots.
3M and greater: FHD
2M or 1M: HD
0.8M or VGA: STD
131
Other Playback Functions (PLAY MENU)
Editing a Movie on the Camera (Movie Editing)
Procedure
[p] (PLAY) * Movie Screen of Movie to be Edited * [MENU] *
“p PLAY MENU” Tab * Movie Editing
The Movie Editing feature lets you use one of the following procedures to edit out a
specific part of a movie.
Previous Cut
Cuts everything from the beginning of the movie up to the
current location.
Intermediate Cut
Cuts everything between two points.
Next Cut
Cuts everything from the current location to the end of the
movie.
1.
Use [8] and [2] to select the editing method you want to use and then
press [SET].
2.
Use the following operations to select the frame
(point) from which or to which you want to cut
the movie (the cut point).
During playback, changes the playback
[4] [6] direction and playback speed. While
playback is paused, scrolls forward or back.
[SET]
3.
Cut range (blue)
Toggles between pause and play.
Press [2] to display the editing menu and specify one or two cut
points.
Previous Cut
While the frame you want the cut to be up to is
displayed, press [2].
1While the frame you want the first (From) cut to be is
displayed, press [2].
Intermediate Cut
2Select another frame.
3While the frame you want the second (To) cut to be
is displayed, press [2].
Next Cut
4.
While the frame you want the cut to be from is
displayed, press [2].
Use [8] and [2] to select “Yes” and then press [SET].
The selected cut operation will take considerable time to complete. Don’t try to
perform any camera operation until the “Busy... Please wait...” message
disappears from the monitor screen. Note that a cut operation can take a long
time if the movie being edited is long.
132
Other Playback Functions (PLAY MENU)
IMPORTANT!
• When you edit a movie, only the result is saved. The original movie is not retained.
An editing operation cannot be undone.
NOTE
• A movie that is shorter than five seconds cannot be edited.
• Editing of movies recorded with a different type of camera is not supported.
• You will not be able to edit a movie if the amount of remaining memory capacity is
less than the size of the movie file you want to edit. If there is not enough memory
available, delete files you no longer need to free up more.
• Splitting of a movie into two movies and splicing of two different movies into a
single movie are not supported.
• You also can start a movie editing operation while the movie you want to edit is
playing back. When playback reaches a frame where you want a cut point to be,
press [SET] to pause playback. Next, press [2] to display the menu of editing
options. Perform editing using the same procedures as described above.
133
Other Playback Functions (PLAY MENU)
To merge two movies (Movie Merge)
Procedure
[p] (PLAY) * Display one of the movies you want to merge. *
[MENU] * “p PLAY MENU” Tab * Movie Merge
This procedure combines two movies. The play times of the each movies must be
less than 10 minutes, and the two movies must be of the same quality and frame rate.
Note that merging of two High Speed Movies is not supported.
1.
Use [4] and [6] to select the movie you want to merge with the one
that was displayed when you pressed [MENU].
Only movies that can be merged with (that are the same quality and frame rate
as) the movie displayed when you pressed [MENU] will be displayed.
2.
Use [8] and [2] to select “Create” and then press [SET].
This will create a new movie that is a combination of movie that was displayed
when you pressed [MENU] and the movie you selected in step 1, above.
• The original two movies are not affected.
NOTE
• In the case of FHD or HD quality movies, some movies may not be able to be
merged because of differences in frame rates due to the recording mode, or the
ART SHOT or Time Lapse scene used.
• A movie shot with another camera model cannot be merged with this function.
• The original movies are not affected when merged. Make sure the memory card
you are using has sufficient unused space before using this function.
• Depending on the movies, the merge operation may take some time to complete.
Creating a Snapshot of Movie Frames (MOTION PRINT)
Procedure
[p] (PLAY) * Movie Screen * [MENU] * “p PLAY MENU” Tab *
MOTION PRINT
1.
Use [4] and [6] to scroll through the movie frames and display the one
you want to use as the image of the MOTION PRINT image.
Holding down [4] or [6] scrolls at high speed.
2.
Use [8] and [2] to select “Create” and then press [SET].
• Only the frames of movies recorded on this camera can be used in a MOTION
PRINT image.
134
Other Playback Functions (PLAY MENU)
Optimizing Image Brightness (Lighting)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] *
“p PLAY MENU” Tab * Lighting
You can use this setting to adjust the balance between bright areas and dark areas in
existing images in the range of 0 (no optimization) to +2 (bright).
NOTE
• Correcting the lighting when shooting produces better results (page 110).
• Altering the lighting of an image causes the original image and the new (altered)
version to be stored as separate files.
• When you display an altered image on the camera’s monitor screen, the date and
time indicates when the image was originally recorded, not when the image was
altered.
Adjusting White Balance (White Balance)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] *
“p PLAY MENU” Tab * White Balance
You can use the white balance setting to select a light source type for a recorded
image, which will affect the colors of the image.
¤ Daylight
Outdoors, fair weather
' Overcast
Outdoors, cloudy to rain, in tree shade, etc.
“ Shade
Very high temperature light, such as building shade, etc.
† Day White
Fluor
White or day white fluorescent lighting, without suppressing
color cast
– Daylight Fluor
Daylight fluorescent lighting, while suppressing color cast
« Tungsten
Suppressing of the appearance of light bulb lighting
Cancel
No white balance adjustment
NOTE
• You also can adjust the white balance when recording images (page 42).
• The original snapshot is retained in memory and not deleted.
• When you display an altered image on the camera’s monitor screen, the date and
time indicates when the image was originally recorded, not when the image was
altered.
135
Other Playback Functions (PLAY MENU)
Adjusting the Brightness of an Existing Snapshot
(Brightness)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] *
“p PLAY MENU” Tab * Brightness
You can select one of five brightness levels, from +2 (brightest) to –2 (least bright).
NOTE
• The original snapshot is retained in memory and not deleted.
• When you display an altered image on the camera’s monitor screen, the date and
time indicates when the image was originally recorded, not when the image was
altered.
Selecting Images for Printing (DPOF Printing)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] *
“p PLAY MENU” Tab * DPOF Printing
See page 155 for details.
136
Other Playback Functions (PLAY MENU)
Protecting a File Against Deletion (Protect)
Procedure
[p] (PLAY) * [MENU] * “p PLAY MENU” Tab * Protect
Protects specific files.
1 Use [4] and [6] to select the image that
you want to protect.
• To view a particular image, rotate the
zoom controller.
Select File 2 Press [SET].
An image that is protected is indicated by
the › icon.
3 To protect other files, repeat steps 1 and 2.
To exit the protect operation, press [MENU]. To unprotect a file, select
an protected image and then press [SET].
All Files
Protects all files.
1 Use [8] and [2] to select “All Files: On” and then press [SET].
2 Press [MENU].
To unprotect all files, select “All Files: Off” instead of “All Files: On” in
step 1 above.
IMPORTANT!
• Note that even if a file is protected, it will be deleted if you perform the format
operation (page 182).
. To protect a specific image in a group
1.
While CS or interval shot group playback is in progress or paused,
press [2].
This will display the “Edit Group” menu.
2.
Use [8] and [2] to select “Protect” and then press [SET].
3.
Use [8] and [2] to select “Select Frames”, and then press [SET].
4.
Use [4] and [6] to select the image that you want to protect, and then
press [SET].
This will protect the image and display the › icon.
• To view a particular image, rotate the zoom controller.
• To unprotect a file, select an protected image and then press [SET].
5.
After you are finished, press [MENU] to exit this operation.
137
Other Playback Functions (PLAY MENU)
IMPORTANT!
• Note that even if a file is protected, it will be deleted if you perform the format
operation (page 182).
. To protect all the images in a group
1.
While CS or interval shot group playback is in progress or paused,
press [2].
2.
Use [8] and [2] to select “Protect” and then press [SET].
3.
Use [8] and [2] to select “Frame all”, and then press [SET].
4.
Use [8] and [2] to select “All Frames On” and then press [SET].
This will protect all the images in the group and display the › icon.
• To unprotect all of the images in the group, select “All Frames Off” in step 4
and then press [SET].
IMPORTANT!
• Note that even if a file is protected, it will be deleted if you perform the format
operation (page 182).
138
Other Playback Functions (PLAY MENU)
Editing the Date and Time of an Image (Date/Time)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] *
“p PLAY MENU” Tab * Date/Time
[8] [2]
Changes the setting at the cursor location.
[4] [6]
Moves the cursor between settings.
When the date and time settings are what you want, align the cursor with “Apply” and
then press [SET] to apply them.
• To switch between 12-hour and 24-hour timekeeping, move the cursor to “am (pm)”
and “24h” (one of which will be displayed) and then use [8] and [2] to change the
setting.
NOTE
• The date and time stamped into an image using the Timestamp (page 174) cannot
be edited.
• You cannot edit the date and time of an image that is protected.
• You can input any date from 1980 to 2049.
Rotating an Image (Rotation)
Procedure
[p] (PLAY) * Snapshot or Movie Screen * [MENU] *
“p PLAY MENU” Tab * Rotation
1.
Use [8] and [2] to select “Rotation” and then press [SET].
Each press of [SET] will rotate the displayed image 90 degrees left.
2.
When the displayed image is at the orientation you want, press
[MENU].
NOTE
• Rotating a CS image causes all of the images in the CS group to be rotated. You
cannot rotate individual component image in a CS group.
• Rotation of a panorama image is not supported.
• Note that this procedure does not actually change the image data. It simply alters
how the image is displayed on the camera’s monitor screen.
• An image that has been protected or zoomed cannot be rotated.
• The original (unrotated) version of the image will be displayed on the image menu
screen.
139
Other Playback Functions (PLAY MENU)
Resizing a Snapshot (Resize)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] *
“p PLAY MENU” Tab * Resize
You can reduce the size of a snapshot and save the result as a separate snapshot.
The original snapshot is also retained. You can resize an image to one of three sizes:
10M, 3M, VGA.
• Resizing a 3:2 or 16:9 size snapshot will create an image with an aspect ratio of
4:3, with both sides cut off.
• The recording date of the resized version of the snapshot will be the same as the
recording date of the original snapshot.
Cropping a Snapshot (Trimming)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] *
“p PLAY MENU” Tab * Trimming
You can crop a snapshot to trim parts you do not need, and
save the result in a separate file. The original snapshot is
also retained.
Zoom factor
Represents
snapshot area
Use the zoom controller to zoom the image to the size you
want, use [8], [2], [4], and [6] to display the portion of
the image you want to cut out, and then press [SET].
• The image produced by cropping a 3:2 or 16:9 image will
have an aspect ratio of 4:3.
• The recording date of the cropped image will be the
same as the recording date of the original snapshot.
Part of snapshot that is
currently displayed
140
Other Playback Functions (PLAY MENU)
Copying Files (Copy)
Procedure
[p] (PLAY) * Snapshot or Movie Screen * [MENU] *
“p PLAY MENU” Tab * Copy
Files can be copied from the camera’s built-in memory to a memory card or from a
memory card to built-in memory.
Built-in *
Card
Copies all files from built-in camera memory to a memory card.
This option copies all the files in built-in camera memory. It cannot be
used to copy a single file.
Card *
Built-in
Copies a single file on the memory card to camera built-in camera
memory. Files are copied to the folder in built-in memory whose
name has the largest serial number.
• You cannot copy a continuous shutter (CS) group image (page
123).
1Use [4] and [6] to select the file you want to copy.
2Use [8] and [2] to select “Copy” and then press [SET].
NOTE
• You can copy snapshots or movies you recorded with this camera.
Combining CS Images into a Single Still Image
(CS Multi Print)
Procedure
[p] (PLAY) * Display CS group. * [MENU] *
“p PLAY MENU” Tab * CS Multi Print
1.
Use [8] and [2] to select “Create”.
• You can use [4] and [6] to select a different CS group, if you want.
2.
Press [SET].
This converts the CS group to a 16M (4608x3456) image with up to 30 CS
frames (5 vertical x 6 horizontal).
• This camera may not be able to correctly convert a CS group image with
another camera.
• The recording date of the converted image will be the same as the recording
date of the original CS group.
• When converting a CS group whose images have been rotated by the
“Rotation” feature to a CS Multi Print image, the arrangement of the images in
the CS Multi Print will be different from that of normal (unrotated) CS images.
141
Other Playback Functions (PLAY MENU)
Dividing Up a Continuous Shutter Group (Divide Group)
Procedure
[p] (PLAY) * [MENU] * “p PLAY MENU” Tab * Divide Group
See page 122 for details.
Editing a CS Image (Edit Group)
Procedure
[p] (PLAY) * [MENU] * “p PLAY MENU” Tab * Edit Group
See the following pages for details.
DPOF Printing: page 155
Protect: page 137
Copy: page 123
Delete: page 120
142
Other Playback Functions (PLAY MENU)
Establishing a Wireless LAN Connection
Wireless LAN Functions
Establishing a wireless LAN connection between the camera and a smartphone
enables the functions described below.
With this function:
See
page:
You can do this:
Remote Capture*
Quick Send*
Remotely control and shoot with the
camera using a smartphone.
147
Send a snapshot displayed in the PLAY
mode to a smartphone by pressing the
camera’s [Õ] (Continuous Shutter)
button. After sending an image to a
smartphone, you can then upload it to a
social networking service.
149
Send snapshots and movies recorded
with your camera to your smartphone.
After sending an image to a
smartphone, you can then upload it to a
social networking service.
151
Use a smartphone or computer to view
and download snapshots and movies
stored in camera memory.
154
Send to phone*
View on phone
* Requires installation of the EXILIM Remote app on your smartphone.
143
Establishing a Wireless LAN Connection
IMPORTANT!
• Never use wireless LAN functions inside an aircraft or anywhere else where such
operation is restricted.
• Some smartphone models may not be able to play back movie files that are sent to
the smartphone.
• Depending on your smartphone model, its operating system version, and/or its
remaining storage capacity can cause failure of a movie or snapshot save
operation. After send operation, perform the required operation on your
smartphone to ensure that the movie or snapshot was saved properly.
• Viewing a movie received on an Android terminal:
Note that movies are not displayed by Gallery. Movies are stored in a folder named
“EXILIM Remote”. A separate movie player is required to playback movies (whose
files have the file name extension MOV). Depending on your movie player, you
may not be able to playback movies and/or audio.
• Attempting to use a memory card that includes a wireless function with this camera
can cause abnormal operation.
NOTE
• Note that using wireless LAN functions requires more battery power usage than
normal. Make sure that the camera battery is sufficiently charged before starting a
wireless LAN operation.
• The operating range depends on the local communication environment and on the
type of smartphone you are connected to. Note that the wireless LAN antenna is
located in the bottom of the camera.
144
Establishing a Wireless LAN Connection
Establishing a Connection between a Smartphone and Your
Camera
Installing the EXILIM Remote Smartphone app on your smartphone makes it possible
to remotely control the camera from your smartphone and to send images recorded
with the camera to your smartphone. For information about how to install and operate
EXILIM Remote, see the User’s Guide or visit the official EXILIM Remote Website
(http://www.exilim.com/app/).
Note that an EXILIM Remote Website may not be available for a particular language.
If you cannot find an EXILIM Remote Website in a language you want, please use a
version in another language.
. App operation guarantees
No guarantees are made concerning the ability to operate the EXILIM Remote app on
any particular smartphone or tablet.
Installing the EXILIM Remote App on Your Smartphone
. Android terminal (Supported Versions: Android 2.3.3 to 4.3)
1.
Open “Google Play”.
2.
In the search field, type “EXILIM Remote”.
3.
Install EXILIM Remote.
. iPhone (Supported Versions: iOS 5.1 to 7.0)
1.
Open “App Store”.
2.
In the search field, type “EXILIM Remote”.
3.
Install EXILIM Remote.
145
Establishing a Wireless LAN Connection
Configuring Wireless LAN Settings
Use the procedure below to establish a wireless LAN connection between the camera
and a smartphone for the first time. This operation is required for the first connection
only.
1.
Select Program Auto as the recording mode.
2.
Press [MENU].
3.
Press [4], use [8] and [2] to select the
“r REC MENU” tab, and then press [SET].
4.
Use [8] and [2] to select “Remote Capture”,
and then press [SET].
5.
Use [8] and [2] to select “Remote Start”, and then press [SET].
password
SSID
This will enable connection with a smartphone and the camera will display a
screen for input of an SSID and password.
6.
For the smartphone Wi-Fi setting, input the camera SSID and
password.
When the message “Start up the phone app.” appears on the camera’s monitor
screen, it means that the smartphone has established a wireless connection with
the camera.
• To break the wireless connection, press [MENU].
• What you need to do to establish a wireless LAN connection depends on the
type of smartphone you are using. For details about how to establish a wireless
LAN connection see the user documentation that comes with your smartphone.
146
Establishing a Wireless LAN Connection
Using a Smartphone as a Camera Remote Controller
(Remote Capture)
This function lets you remotely shoot a snapshot or movie with the camera using a
smartphone. You also can perform remote zoom, self-timer, and other operations as
well. You can use any one of the recording modes below to shoot with Remote
Capture.
• Program Auto
• Premium Auto Pro
• A (Aperture AE) mode
• S (Shutter Speed AE) mode
• M (Manual Exposure) mode
1.
On your camera, select one of the above as the recording mode.
2.
Press [MENU].
3.
Press [4], use [8] and [2] to select the “r REC MENU” tab, and then
press [6].
4.
Use [8] and [2] to select “Remote Capture”, and then press [SET].
5.
Use [8] and [2] to select “Remote Start”, and then press [SET].
6.
On your smartphone, start up the EXILIM Remote app.
This will establish a connection between the smartphone and your camera.
• About 60 seconds after your camera establishes a connection with the
smartphone, the camera’s monitor screen will go blank and its back lamp will
light green.
• If the message “Connect your phone to the access point below.” remains on
the camera’s monitor screen, change the smartphone’s Wi-Fi settings so your
camera is selected for connection (page 146).
7.
Compose the image on your smartphone’s screen as you shoot.
• After you are finished using Remote Capture, press [MENU] on the camera or
exit the app on your smartphone.
147
Establishing a Wireless LAN Connection
IMPORTANT!
• The Movie Quality is always STD (640x480) when shooting with Remote Capture.
• “O Tracking” cannot be selected for the AF area setting while shooting with
Remote Capture. If “O Tracking” is selected in another mode, selecting Remote
Capture will cause the AF area setting to change to “U Spot”.
• The camera’s Handsfree Mode cannot be used while shooting with this function.
• High Speed CS and Prerecord CS can be used in any recording mode other than
Premium Auto Pro. Configure CS Speed, Maximum CS Shots, and Pre-record CS
Shots settings on the camera before establishing a wireless LAN connection.
• In the case of Prerecord CS, tapping the “PAST” button at the bottom of the
smartphones screen will start continual pre-recording of images to a temporary
buffer. After that, tapping the shutter button 8 (see below) will record the number
of images specified by “Maximum CS Shots” (pre-recorded images plus real-time
recorded images).
• When the focus mode setting (page 44) is “AF” (Auto Focus) or “Macro”,
continuous AF (page 110) is enabled during Remote Capture and focus is
performed in the center of image.
. Controlling Your Camera with a Smartphone
EXILIM Remote supports the Remote Capture operations listed below. This manual
explains EXILIM Remote operations based on screens that appear using the iPhone
version. Some operations may differ depending on your smartphone type.
bl
bk
1 Exits Remote Capture.
2 Shows the current recording mode.
3 Displays current flash settings.
Tap to change flash settings.
4 Displays what is being picked up by the camera’s
lens.
5 Performs a zoom operation.
6 Starts Prerecord CS shooting.
This button is displayed when the camera is in the
High Speed CS Mode and the “Pre-record CS
Shots” setting is anything other than 0.
7 Toggles between snapshot and movie shooting.
8 Shoot a snapshot or start movie recording.
9 Sends the snapshot that was just recorded to the
smartphone.
bkDisplays location information settings.
blDisplays current self-timer settings.
Tap to change self-timer settings.
148
Establishing a Wireless LAN Connection
Location Information
You can add location information to snapshots shot with Remote Capture when they
are sent to a smartphone using 9. On an Android terminal, select “Options” on the
Remote Capture screen. On an iPhone, perform the following operation: “Settings”
* “Privacy” * “Location Services”.
IMPORTANT!
• Enabling location-based services causes the recording date, location information,
and other personally identifiable information to be included in the snapshot data.
Take care when sharing or publishing such images on web services, etc.
Sending the Currently Displayed Image to a Smartphone
(Quick Send)
You can use the procedure below to send an image displayed in the PLAY mode
(including movies) to a smartphone by pressing the camera’s [Õ] (Continuous
Shutter) button. After sending an image to a smartphone, you can then upload it to a
social networking service.
• To use this function, you need to assign the Quick Send function to the
[Õ] (Continuous Shutter) button.
To assign the Quick Send function to
the [Õ] (Continuous Shutter) button
1.
On the camera, enter the PLAY mode and then press [MENU].
2.
Press [4], and then use [8] and [2] to select the “p PLAY MENU”
tab. Next, press [6].
3.
Use [8] and [2] to select “Quick Send” and then press [6].
4.
Use [8] and [2] to select “Send by HS Key” and then press [SET].
149
Establishing a Wireless LAN Connection
To send the displayed image to a smartphone
1.
On the smartphone, start up EXILIM Remote. In the
upper right corner of the screen that appears, tap
“Setting”.
2.
If you plan to upload the image to a social
networking service after sending it to the
smartphone, turn “Send to SNS” on. Otherwise,
turn it off.
3.
[8] and [2] to scroll through camera images until
the one you want to send to the smartphone is displayed.
• To send one image from a CS or interval shot group, press [SET] to start
playback of the group images. When the image you want to send is displayed,
press [SET] again to pause playback.
4.
Press [Õ] (Continuous Shutter).
5.
On your smartphone, start up the EXILIM Remote app.
This will establish a connection between your camera and the smartphone, and
send the files to the smartphone.
• If the message “Connect your phone to the access point below.” remains on
the camera’s monitor screen, change the smartphone’s Wi-Fi settings so your
camera is selected for connection (page 146).
6.
After image send is complete, perform either of the operations
described below.
If you turn “Send to SNS” on in step 2 of this procedure:
A screen for uploading the image to a social networking service will appear on
the smartphone screen after image send from the camera is complete. The
wireless LAN between the camera and smartphone will be disconnected at this
time. On the social networking service upload screen, select the service you
want to upload to.
If you turn “Send to SNS” off in step 2 of this procedure:
The camera and smartphone will remain connected by wireless LAN after the
image send operation is complete, so you can repeat steps 3 and 4 of this
procedure to send another image. To break the connection, exit EXILIM
Remote or turn off the camera.
150
Establishing a Wireless LAN Connection
NOTE
• “Û” is displayed on the camera screen while there is a wireless LAN connection
between the camera and a smartphone.
• You can specify the size of the image sent to the smartphone using “Resize before
send” (page 153).
• You can use the smartphone apps below to view snapshots after sending them.
– iPhone: Camera Roll
– Android terminal: Gallery or another photo browser app
Sending a Snapshot or Movie File from Camera Memory to a
Smartphone (Send to phone)
You can select one more snapshot and/or movie file in camera memory and send it to
a smartphone. You can select up to 100 files, totaling no more than 500MB for a
single send. After sending an image to a smartphone, you can then upload it to a
social networking service.
1.
On the smartphone, start up EXILIM Remote. In the
upper right corner of the screen that appears, tap
“Setting”.
2.
If you plan to upload the image to a social
networking service after sending it to the
smartphone, turn “Send to SNS” on. Otherwise,
turn it off.
3.
In the PLAY mode, press [MENU].
4.
Press [4], use [8] and [2] to select the “p PLAY MENU” tab, and
then press [6].
5.
Use [8] and [2] to select “Send to phone”, and then press [SET].
6.
Use [8], [2], [4], or [6] to move the blue boundary to the image you
want to send to the smartphone, and then press [SET].
Selecting the image of a file causes its check box to become selected.
• You can enlarge the selected image by rotating the zoom controller towards
z ([).
7.
After selecting the images of all of the files you want to send to the
smartphone, press [MENU].
151
Establishing a Wireless LAN Connection
8.
On your smartphone, start up the EXILIM Remote app.
This will establish a connection between your camera and the smartphone, and
send the files to the smartphone.
• If the message “Connect your phone to the access point below.” remains on
the camera’s monitor screen, change the smartphone’s Wi-Fi settings so your
camera is selected for connection (page 146).
9.
After image send is complete, perform either of the operations
described below.
If you turn “Send to SNS” on in step 2 of this procedure:
A screen for uploading the image to a social networking service will appear on
the smartphone screen after image send from the camera is complete. The
wireless LAN between the camera and smartphone will be disconnected at this
time. On the social networking service upload screen, select the service you
want to upload to.
If you turn “Send to SNS” off in step 2 of this procedure:
The camera and smartphone will remain connected by wireless LAN after the
image send operation is complete, so you can repeat steps 3 and 4 of this
procedure to send another image. To break the connection, exit EXILIM
Remote or turn off the camera.
NOTE
• “Û” is displayed on the camera screen while there is a wireless LAN connection
between the camera and a smartphone.
• You can specify the size of the snapshots sent to the smartphone using “Resize
before send” (page 153).
• You can use the smartphone apps below to view snapshots after sending them.
– iPhone: Camera Roll
– Android terminal: Gallery or another photo browser app
152
Establishing a Wireless LAN Connection
Resizing Snapshots before Sending Them to a Smartphone
(Resize before send)
This feature can be use to resize snapshots before they are sent to a smartphone
using “Quick Send”, “Remote Capture”, or “Send to phone”.
1.
Turn on the camera, and then press [MENU].
2.
Press [4], use [8] and [2] to select the “¥ SETTING” tab, and then
press [6].
3.
Use [8] and [2] to select “Resize before send”, and then press [SET].
4.
Use [8] and [2] to select the image size, and then press [SET].
3M
Images are converted to 3M size before being sent.
• If an original image is 3M size or smaller, it is sent without
resizing.
Off
Images are sent in the size they were originally recorded.
153
Establishing a Wireless LAN Connection
Viewing Snapshots and Movies in Camera Memory on a
Smartphone (View on phone)
You can use this function to enable up to eight smartphones and/or computers to
access snapshots and movies in camera memory for viewing and download. A
smartphone does not need to have the EXILIM Remote app installed in order to
access camera images using this function.
1.
In the PLAY mode, press [MENU].
2.
Press [4], use [8] and [2] to select the “p PLAY MENU” tab, and
then press [6].
3.
Use [8] and [2] to select “View on phone”, and then press [SET].
This establishes a connection between the smartphone and camera, and displays
a URL.
• If the message “Connect your phone to the access point below.” remains on
the camera’s monitor screen, change the smartphone’s Wi-Fi settings so your
camera is selected for connection (page 146).
• After about 60 seconds, the camera’s monitor screen will go blank. Pressing
[SET] will cause its image to reappear.
4.
On the smartphone, start up its browser app.
• The browser will automatically access the URL displayed by the camera in
step 3 of this procedure, and then display an image stored in camera memory.
• If no camera image appears automatically,
manually input the URL into the browser.
• To exit the wireless LAN function, press [MENU].
URL
IMPORTANT!
• Some smartphone models may not be able to play back movie files.
NOTE
• You can also view image in camera memory on a computer’s browser by
establishing a wireless LAN connection with the computer.
154
Establishing a Wireless LAN Connection
Printing
Printing Snapshots
Professional Print Service*
You can take a memory card that contains the images you want
to print to a professional print service and have them printed.
Printing on a Home Printer*
You can use a printer equipped with a memory card slot to print
images directly from a memory card. For details, see the user
documentation that comes with your printer.
Printing with a Computer
After transferring the images to your computer, use
commercially available software to print.
* You can specify which images you want to print, the number of copies, and date
stamp settings before printing (page 155).
Using DPOF to Specify Images to be Printed and the Number
of Copies (DPOF Printing)
. Digital Print Order Format (DPOF)
DPOF is a standard that allows you to include image type, number of copy,
and time stamp on/off information on the memory card with the images.
After configuring settings, you can use the memory card to print on a home
printer that supports DPOF or take the memory card to a professional print
service.
• Whether or not you will be able to use DPOF settings for printing depends on the
printer you are using.
• Some professional print services may not support DPOF.
155
Printing
. Configuring DPOF Settings Individually for Each Image
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] *
“p PLAY MENU” Tab * DPOF Printing * Select images
1.
Use [4] and [6] to scroll through the files until the image you want to
print is displayed.
2.
Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [0] (Movie) so “On” is
shown for date stamping.
• Repeat steps 1 and 2 to configure settings for other images, if you want.
3.
Press [SET].
. Configuring the Same DPOF Settings for All the Images
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] *
“p PLAY MENU” Tab * DPOF Printing * All images
1.
Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• When printing a CS or interval shot group, the specified number of copies of all
of the images in the group is printed.
• If you want to include the date in the images, press [0] (Movie) so “On” is
shown for date stamping.
2.
Press [SET].
156
Printing
. To specify the number of copies for a specific image in a group
1.
While CS or interval shot group playback is in progress or paused,
press [2].
This will display the “Edit Group” menu.
2.
Use [8] and [2] to select “DPOF Printing” and then press [SET].
3.
Use [8] and [2] to select “Select Frames” and then press [SET].
4.
Use [4] and [6] to scroll through images until one you want to print is
displayed.
5.
Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [0] (Movie) so “On” is
shown for date stamping.
• Repeat steps 4 and 5 to configure settings for other images, if you want.
6.
Press [SET].
. To configure the same DPOF settings for all the images in a group
1.
While CS or interval shot group playback is in progress or paused,
press [2].
This will display the “Edit Group” menu.
2.
Use [8] and [2] to select “DPOF Printing” and then press [SET].
3.
Use [8] and [2] to select “Frame all” and then press [SET].
4.
Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [0] (Movie) so “On” is
shown for date stamping.
5.
Press [SET].
157
Printing
DPOF settings are not cleared automatically after printing is complete.
The next DPOF print operation you execute will be performed using the last DPOF
settings you configured for the images. To clear DPOF settings, specify “00” for the
number of copies of all images.
Tell your print service about your DPOF settings!
If you take a memory card to a professional print service, be sure to tell them that it
includes DPOF settings for the images to be printed and the number of copies. If you
don’t, the print service may print all the images without regard to your DPOF settings,
or they may ignore your date stamp setting.
. Date Stamping
You can use one of the following three methods to include the recording date in the
printout of an image.
Configuring camera settings
Configure DPOF settings (page 155).
You can turn date stamping on and off each time you print. You can configure
settings so some images include the date stamp and some don’t.
Configure the Camera’s Timestamp setting (page 174).
• The camera’s Timestamp setting imprints the date into a snapshot when you
shoot it, so the date is always included when you print. It cannot be deleted.
• Do not turn on DPOF date stamping for an image that includes a date
stamped with the camera’s Timestamp function. Doing so can cause the two
stamps to be overprinted.
Configuring computer settings
You can use commercially available image management software to date
stamp images.
Professional print service
Request date stamping when ordering prints from a professional print service.
158
Printing
. Standards Supported by the Camera
• PRINT Image Matching III
Using image editing software and printing on a printer that supports
PRINT Image Matching III makes it possible to use information about
shooting conditions that is recorded with the image, and produce
exactly the type of image you want. PRINT Image Matching and
PRINT Image Matching III are trademarks of Seiko Epson Corporation.
• Exif Print
Printing on a printer that supports Exif Print uses information about
shooting conditions recorded with the image to enhance printed
image quality. Contact your printer manufacturer for information
about models that support Exif Print, printer upgrades, etc.
159
Printing
Using the Camera with a Computer
Things you can do using a computer...
You can perform the operations described below while the camera is connected to a
computer.
Save images to
a computer and
view them there
• Save images and view them manually (USB
connection) (pages 161, 165).
Play back and
edit movies
• You can play back movies (pages 164, 167).
To play back movies, use software that is
compatible with your computer’s operating
environment.
• To edit movies, use commercially available
software as required.
The procedures you need to perform are different for Windows and the Macintosh.
• Windows users should refer to “Using the Camera with a Windows Computer”
on page 161.
• Macintosh users should refer to “Using the Camera with a Macintosh” on page
165.
160
Using the Camera with a Computer
Using the Camera with a Windows Computer
When you want Operating System
to do this:
Version
Required Software
See
page:
Save images to
Windows 8, 8.1,
a computer and
Windows 7,
view them there
Windows Vista
manually
Installation not required.
161
Windows 8, 8.1,
Windows 7
Windows Media Player 12
(installed on computer)
Windows Vista
QuickTime 7
• You need to download QuickTime 7
on the Web if you want to use it.
Play movies
164
Viewing and Storing Images on a Computer
You can connect the camera to your computer in order to view and store images
(snapshot and movie files).
Never use your computer to modify, delete, move, or rename any image files
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which
will make it impossible to play back images on the camera and can drastically alter
remaining memory capacity. Whenever you want to modify, delete, move, or
rename an image, do so only on images that are stored on your computer.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
NOTE
• You also can use your computer’s card slot (if it has one) or a commercially
available card reader to access image files directly from the camera’s memory
card. For details, see the user documentation that comes with your computer.
161
Using the Camera with a Computer
. To connect the camera to your computer and save files
1.
Turn off the camera and then
use the micro USB cable that
comes with the camera to
connect it to your computer.
USB port
USB
• For details about connecting to
the camera and precautions
when connecting, see page 21.
Micro USB cable
(included with camera)
2.
Press [ON/OFF] (Power) to turn on the camera.
When you turn on the camera, check to make sure that the color of its back lamp
changes from red to green or amber (page 22). Note that in this case the
camera's lens will not extend and the monitor screen will remain blank.
• The first time you connect the camera to your computer with the USB cable, an
error message may appear on your computer. If this happens, disconnect and
then reconnect the USB cable.
3.
Windows 8, 8.1 users: Click “Desktop” and then “Explorer”.
Windows 7, Windows Vista users: Click “Start” and then “Computer”.
4.
Double-click “Removable Disk”.
• Your computer recognizes the memory card loaded in the camera (or built-in
memory if there is no card) as a removable disk.
5.
Right-click the “DCIM” folder.
6.
On the shortcut menu that appears, click “Copy”.
7.
Windows 8, 8.1 users: Click “Documents”.
Windows 7, Windows Vista users: Click “Start” and then “Documents”.
• If you already have a “DCIM” folder in “Documents”, the next step will overwrite
it. If you want to keep the existing “DCIM” folder, you need to change its name
or move it to a different location before performing the next step.
162
Using the Camera with a Computer
8.
Windows 8, 8.1 users: On the “Documents” menus, click “Home” and
then “Paste”.
Windows 7 users: On the “Documents” “Organize” menu, select
“Paste”.
Windows Vista users: On the “Documents” “Edit” menu, select
“Paste”.
This will paste the “DCIM” folder (and all the image files it contains) into your
“Documents” folder. You now have a copy of the files that are in camera memory
on your computer.
9.
After you finish copying images, disconnect the camera from the
computer.
After confirming that the back lamp is not flashing red, disconnect the USB cable.
. To view images you copied to your computer
1.
Double-click the copied “DCIM” folder to open it.
2.
Double-click the folder that contains the images you want to view.
3.
Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 170.
• An image that was rotated on the camera will be displayed on your computer
screen in its original (unrotated) orientation.
• Viewing CS and interval shot images on a computer will individually display the
component images in the group. CS and interval shot images cannot be
viewed as a group on a computer.
163
Using the Camera with a Computer
Playing Movies
To play back a movie, first copy it to your computer and then double-click the movie
file. Some operating systems may not be able to play back movies. If this happens,
you need to install separately available software.
• With Windows 8, 8.1 and Windows 7, playback is supported by Windows Media
Player 12.
• If you are unable to play back movies, go to the URL below to download
QuickTime 7 and install it on your computer.
http://www.apple.com/quicktime/
. Minimum Computer System Requirements for Movie Playback
The minimum system requirements described below are necessary to play back
movies recorded with this camera on a computer.
Operating System : Windows 8, 8.1, Windows 7, Windows Vista
CPU
: Image Quality “FHD” or “HD”:
Core 2 Duo 3.0GHz or higher
Image Quality “STD” or “HS”:
Pentium 4 3.2GHz or higher
Required Software: QuickTime 7 (Not required with Windows 8, 8.1 and Windows 7.)
• The above are recommended system environments. Configuring one of these
environments does not guarantee proper operation.
• Certain settings and other installed software may interfere with proper playback of
movies.
. Movie Playback Precautions
• Be sure to move the movie data to the hard disk of your computer before trying to
play it. Proper movie playback may not be possible for data accessed over a
network, from a memory card, etc.
• Proper movie playback may not be possible on some computers. If you experience
problems, try the following.
– Try recording movies with a quality setting of “STD”.
– Quit any other applications you have running, and stop resident applications.
Even if proper playback is not possible on the computer, you can use a commercially
available HDMI cable to connect to the HDMI terminal of a TV or computer and play
back movies that way.
164
Using the Camera with a Computer
Using the Camera with a Macintosh
When you want to
do this:
Operating
System Version
Required Software
Save images to your
Macintosh and view
them there manually
OS X
Installation not required.
Save images to your
Macintosh
automatically/
Manage images
OS X
iPhoto, which comes bundled
with some Macintosh products.
Play movies
OS X
QuickTime 7.7 or higher
See
page:
165
–
167
Connecting the Camera to Your Computer and Saving Files
Never use your computer to modify, delete, move, or rename any image files
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which
will make it impossible to play back images on the camera and can drastically alter
remaining memory capacity. Whenever you want to modify, delete, move, or
rename an image, do so only on images that are stored on your computer.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
• The camera does not support operation with Mac OS X 10.0 to 10.4. Operation is
supported with Mac OS 10.5 to 10.9 (using the OS standard USB driver) only.
NOTE
• You also can use your computer’s card slot (if it has one) or a commercially
available card reader to access image files directly from the camera’s memory
card. For details, see the user documentation that comes with your computer.
165
Using the Camera with a Computer
. To connect the camera to your computer and save files
1.
Turn off the camera and then
use the micro USB cable that
comes with the camera to
connect it to your Macintosh.
USB port
USB
• For details about connecting to
the camera and precautions
when connecting, see page 21.
Micro USB cable
(included with camera)
2.
Press [ON/OFF] (Power) to turn on the camera.
When you turn on the camera, check to make sure that the color of its back lamp
changes from red to green or amber (page 22). Note that in this case the
camera's lens will not extend and the monitor screen will remain blank.
In this mode, your Macintosh recognizes the memory card loaded in the camera
(or the camera’s built-in memory if it does not have a memory card loaded) as a
drive. The appearance of the drive icon depends on the Mac OS version you are
using.
• The first time you connect the camera to your Macintosh with the USB cable,
an error message may appear on your computer. If this happens, disconnect
and then reconnect the USB cable.
3.
Double-click the camera’s drive icon.
4.
Drag the “DCIM” folder to the folder to which you want to copy it.
5.
After the copy operation is complete, drag the drive icon to Trash.
6.
Disconnect the camera from the computer.
After confirming that the back lamp is not flashing red, disconnect the USB cable.
166
Using the Camera with a Computer
. To view copied images
1.
Double-click the camera’s drive icon.
2.
Double-click the “DCIM” folder to open it.
3.
Double-click the folder that contains the images you want to view.
4.
Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 170.
• An image that was rotated on the camera will be displayed on your Macintosh
screen in its original (unrotated) orientation.
• Viewing CS and interval shot images on a computer will individually display the
component images in the group. CS and interval shot images cannot be
viewed as a group on a computer.
Playing a Movie
You can use QuickTime, which comes bundled with your operating system, to play
back movies on a Macintosh. To play back a movie, first copy it to your Macintosh
and then double-click the movie file.
. Minimum Computer System Requirements for Movie Playback
The minimum system requirements described below are necessary to play back
movies recorded with this camera on a computer.
Operating System : Mac OS X 10.5 or higher
Required Software: QuickTime 7.7 or higher
• The above are recommended system environments. Configuring one of these
environments does not guarantee proper operation.
• Certain settings and other installed software may interfere with proper playback of
movies.
167
Using the Camera with a Computer
. Movie Playback Precautions
Proper movie playback may not be possible on some Macintosh models. If you
experience problems, try the following.
– Try recording movies with a quality setting of “STD”.
– Upgrade to the latest version of QuickTime.
– Shut down other applications that are running.
Even if proper playback is not possible on your Macintosh, you can use a
commercially available HDMI cable to connect to the HDMI terminal of a TV or
Macintosh and play back movies that way.
IMPORTANT!
• Be sure to move the movie data to the hard disk of your Macintosh before trying to
play it. Proper movie playback may not be possible for data accessed over a
network, from a memory card, etc.
168
Using the Camera with a Computer
Files and Folders
The camera creates a file each time you shoot a snapshot, record a movie, or
perform any other operation that stores data. Files are grouped by storing them in
folders. Each file and folder has its own unique name.
• For details about how folders are organized in memory, see “Memory Folder
Structure” (page 170).
Name and Maximum Number Allowed
Example
Each folder can contain up to 9999 files named
CIMG0001 through CIMG9999. The extension
on the file name depends on the file type.
26th file name:
File
CIM G0026.JPG
Serial number
(4 digits)
Extension
Folders
Folders are named from 100CASIO to
999CASIO.
There can be up to 900 folders in memory.
100th folder name:
100CASIO
Serial number (3 digits)
• You can view folder and file names on your computer. For details about how file
names are displayed on the camera’s monitor screen, see page 14.
• The total number of folders and files allowed depends on the image size and
quality, and capacity of the memory card being used for storage.
169
Using the Camera with a Computer
Memory Card Data
The camera stores images you shoot in accordance with the Design Rule for Camera
File System (DCF).
. About DCF
The following operations are supported for DCF-compliant images. Note, however,
that CASIO makes no performance guarantees concerning these operations.
• Transferring this camera’s DCF-compliant images to another manufacturer’s
camera and view them.
• Printing this camera’s DCF-compliant images on another manufacturer’s printer.
• Transferring another camera’s DCF-compliant images to this camera and view
them.
. Memory Folder Structure
100CASIO
CIMG0001.JPG
CIMG0002.MOV
DCIM Folder
Recording Folder
Image File
Movie File
101CASIO
102CASIO
Recording Folder
Recording Folder
DCIM
MISC
AUTPRINT.MRK
DPOF File Folder
DPOF File
RAW
SCENE *
Scene folder for snapshots registered with CUSTOM SHOT
SSBGM
SSBGM001.WAV
SSBGM002.WAV
Background Music Folder
Background Music File
Background Music File
* This folder or file can be created in built-in memory only.
170
Using the Camera with a Computer
. Supported Image Files
• Image files shot with this camera
• DCF-compliant image files
This camera may not be able to display an image, even if it is DCF-compliant. When
displaying an image recorded on another camera, it may take a long time for the
image to appear on this camera’s monitor screen.
. Built-in Memory and Memory Card Data Handling Precautions
• Whenever copying memory contents to your computer, you should copy the DCIM
folder and all of its contents. A good way to keep track of multiple DCIM folders it to
change their names to dates or something similar after you copy them to your
computer. If you later decided to return a DCIM folder to the camera, however, be
sure to change its name back to DCIM. The camera is designed to recognize only a
root file with the name DCIM. Note the camera also will not be able to recognize the
folders inside the DCIM folder unless they have the names they originally had
when you copied them from the camera to your computer.
• Folders and files must be stored in accordance with the “Memory Folder Structure”
shown on page 170 in order for the camera to be able to recognize them correctly.
171
Using the Camera with a Computer
Other Settings (SETTING)
This section explains menu items that you can use to configure settings and perform
other operations in both the REC mode and PLAY mode.
For information about menu operations, see page 96.
Enabling Power Saving (ECO Mode)
Procedure
[MENU] * “¥ SETTING” Tab * ECO Mode
Enabling power saving reduces the brightness of the monitor screen and switches
other camera operations to low-power operation, which allows a charge to last longer
and increases the number of images that can be shot between charges.
Selecting “On” enters the “ECO Mode”, which is indicated by e on the monitor
screen. The power saving effect of the “ECO Mode” is most efficient when “Program
Auto” is selected for the recording mode. Use the “Program Auto” recording mode is
recommended when using the “ECO Mode”.
NOTE
• You can achieve even greater power savings by using the “ECO Mode” in
combination with Auto Power Off (page 176) and Sleep (page 176).
Adjusting Monitor Screen Brightness (Screen)
Procedure
[MENU] * “¥ SETTING” Tab * Screen
Auto
With this setting, the camera detects available light levels and
automatically adjusts the brightness of the monitor screen accordingly.
+2
Brightness that is greater than +1, which makes the screen easier to view.
This setting consumes more power.
+1
Bright setting for outdoor use, etc. Brightness that is greater than 0.
Normal monitor screen brightness for indoor use, etc.
–1
Low monitor screen brightness for nighttime use, indoor use under dark
conditions, etc.
• Turning on the “ECO Mode” (page 172) while the “Screen” setting is +2 or +1 will
cause the “Screen” setting to change to 0.
172
Other Settings (SETTING)
Resizing Snapshots before Sending Them to a Smartphone
(Resize before send)
Procedure
[MENU] * “¥ SETTING” Tab * Resize before send
See page 153 for details.
Configuring Camera Sound Settings (Sounds)
Procedure
[MENU] * “¥ SETTING” Tab * Sounds
Startup
Half Shutter
Shutter
Specifies the startup sound
Sound 1 - 5: Built-in sounds (1 through 5)
Off: Sound off
Operation
Operation Vol
Specifies the sound volume. This setting is also used as the
audio level during TV output (page 124).
Playback Vol
Specifies the volume of movie audio output. This volume
setting is not used during TV output (page 124).
• Setting a volume level of 0 mutes output.
173
Other Settings (SETTING)
Creating an Image Storage Folder (Create Folder)
Procedure
[MENU] * “¥ SETTING” Tab * Create Folder
Create Folder
Creates a folder with a unique number (page 169). Files will be
stored in the new folder starting from when you record your
next image.
Cancel
Cancels folder creation.
• Deleting all of the files in a folder cause the folder to be deleted as well.
Time Stamping Snapshots (Timestamp)
Procedure
[MENU] * “¥ SETTING” Tab * Timestamp
You can configure the camera to stamp the recording date only, or date and time in
the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or
deleted.
Example: July 10, 2015, 1:25 p.m.
Date
2015/7/10
Date & Time
2015/7/10 1:25pm
Off
No stamping of date and/or time
• Even if you do not stamp the date and/or time with Timestamp, you can do so later
using the DPOF function or some printing application (page 158).
• Stamping is performed in accordance with the date and time settings (page 179)
and the display style settings (page 179).
• Time stamping is disabled when certain BEST SHOT scenes are being used.
174
Other Settings (SETTING)
Auto Image Orientation Detection and Rotation (Auto Rotate)
Procedure
[MENU] * “¥ SETTING” Tab * Auto Rotate
On
Rotates the displayed image in accordance with the camera
orientation when the image was recorded.
Off
Images not rotated automatically.
This setting can be used to configure the camera to display playback images in the
same orientation as the camera when the image was shot.
Specifying the File Name Serial Number Generation Rule
(File No.)
Procedure
[MENU] * “¥ SETTING” Tab * File No.
Use the following procedure to specify the rule that governs generation of the serial
number used in file names (page 169).
Continue
Tells the camera to remember the last used file number. A new file
will be named using the next sequential number, even if files are
deleted or if a blank memory card is loaded. If a memory card is
loaded and that card already has files stored on it and the largest
sequential number in the existing file names is greater than the
largest sequential number remembered by the camera, numbering of
new files will start from the largest sequential number in the memory
card file names plus 1.
Reset
Restarts the serial number from 0001 whenever all files are deleted
or when the memory card is replaced with a blank one. If a memory
card is loaded and that card already has files stored on it, numbering
of new files will start from the largest sequential number in the
memory card file names plus 1.
175
Other Settings (SETTING)
Configuring Sleep State Settings (Sleep)
Procedure
[MENU] * “¥ SETTING” Tab * Sleep
This feature turns off the monitor screen and lights the back lamp (green) whenever
no camera operation is performed for a preset period of time. Press any button to turn
the monitor screen back on.
Trigger Time Settings: 30 sec, 1 min, 2 min, Off (Sleep is disabled while “Off” is
selected.)
• Sleep is disabled under any of the following conditions.
– In the PLAY mode
– While the camera is connected to a computer, TV, or other device
– During movie recording and playback
– During Remote Capture
• When both sleep and Auto Power Off are turned on, Auto Power Off takes priority.
Configuring Auto Power Off Settings (Auto Power Off)
Procedure
[MENU] * “¥ SETTING” Tab * Auto Power Off
Auto Power Off turns off the camera whenever no camera operation is performed for
a preset amount of time.
Trigger Time Settings: 2 min, 5 min, 10 min (The trigger time is always 5 minutes in
the PLAY mode.)
• Auto Power Off is disabled under any of the following conditions.
– While the camera is connected to a computer or other device
– During a slideshow
– During CS or interval shot group playback
– During movie recording and playback
– During Remote Capture
– During Interval Shot recording
176
Other Settings (SETTING)
Configuring [r] Setting (REC)
Procedure
[MENU] * “¥ SETTING” Tab * REC
Power On
Camera turns on whenever [r] (REC) is pressed.
On/Off
Camera turns on or off whenever [r] (REC) is pressed.
Off
Camera does not turn on or off when [r] (REC) is pressed.
• With “On/Off”, the camera turns off when you press [r] (REC) in the REC mode.
Configuring [p] Setting (PLAY)
Procedure
[MENU] * “¥ SETTING” Tab * PLAY
Power On
Camera turns on whenever [p] (PLAY) is pressed.
On/Off
Camera turns on or off whenever [p] (PLAY) is pressed.
Off
Camera does not turn on or off when [p] (PLAY) is pressed.
• With “On/Off”, the camera turns off when you press [p] (PLAY) in the PLAY
mode.
Disabling File Deletion (Delete Key)
Procedure
[MENU] * “¥ SETTING” Tab * Delete Key
The camera will not start the image delete operation when you press [2] (
) while
“Delete Key” is turned on.
You can protect against accidental deletion of images by selecting “Disabled” for
“Delete Key”.
• Performing a format operation (page 182) will cause all images to be deleted, even
if file deletion is disabled (“Disabled” selected for “Delete Key”) for some images.
177
Other Settings (SETTING)
Configuring World Time Settings (World Time)
Procedure
[MENU] * “¥ SETTING” Tab * World Time
You can use the World Time screen to view the current time in a zone that is different
from your Home City when you go on a trip, etc. World Time displays the current time
in 162 cities in 32 time zones around the globe.
1.
Use [8] and [2] to select “Destination” and then press [6].
• To change the geographic area and city for the time where you normally use
the camera, select “Home”.
2.
Use [8] and [2] to select “City” and then press [6].
• To change the “Destination” setting to summer time, use [8] and [2] to select
“DST” and then select “On”. Summer time is used in some geographical areas
to advance the current time setting by one hour during the summer months.
3.
Use [8] and [2] to select the geographic area you want and then press
[SET].
4.
Use [8] and [2] to select the city you want and then press [SET].
5.
Press [SET].
IMPORTANT!
• Before configuring World Time settings, make sure that the Home City setting is
the place where you live or normally use the camera. If it isn’t, select “Home” on the
screen in step 1 and configure the Home City, date, and time settings as required
(page 179).
178
Other Settings (SETTING)
Setting the Camera’s Clock (Adjust)
Procedure
[MENU] * “¥ SETTING” Tab * Adjust
When the date and time settings are what you want, select “Apply” and then press
[SET] to apply them.
[8] [2]
Change the setting at the cursor location
[4] [6]
Move the cursor between settings
• To switch between 12-hour and 24-hour timekeeping, move the cursor to “am (pm)”
and “24h” (one of which will be displayed) and then use [8] and [2] to change the
setting.
• You can specify a date from 2001 to 2049.
• Be sure to select your Home City (page 178) before setting the time and date. If
you set the time and date while the wrong city is selected for your Home City, the
times and dates of all of the World Time cities (page 178) will be wrong.
Specifying the Date Style (Date Style)
Procedure
[MENU] * “¥ SETTING” Tab * Date Style
You can select from among three different styles for the date.
Example: July 10, 2015
YY/MM/DD
15/7/10
DD/MM/YY
10/7/15
MM/DD/YY
7/10/15
179
Other Settings (SETTING)
Specifying the Display Language (Language)
Procedure
[MENU] * “¥ SETTING” Tab * Language
. Specify the display language you want.
1 Select the bottom tab “¥”.
2 Select “Language”.
3 Select the language you want.
23
• Camera models sold in certain geographic areas may
not support display language selection.
Selecting the HDMI Terminal Output Method (HDMI Output)
Procedure
[MENU] * “¥ SETTING” Tab * HDMI Output
• See page 126 for details.
180
Other Settings (SETTING)
Changing the Camera Password for Wireless LAN Connection
(WLAN password)
Procedure
[MENU] * “¥ SETTING” Tab * WLAN password
Use procedure to change the password you used when establishing a wireless LAN
connection between the camera and a smartphone.
1.
Use [4] and [6] to move the cursor to the password digit you want to
change.
2.
Use [8] and [2] to change the currently selected digit.
3.
When the password is the way you want, move the cursor to “Apply”
and then press [SET]
NOTE
• Note that after changing the wireless LAN password on the camera, you will also
need to change the Wi-Fi settings of the smartphone.
– iPhone:
Tap the right arrow of the field where the SSID of the camera is displayed in the
Wi-Fi settings to delete network settings. After deleting, select the camera SSID
again and input the new password.
– Android terminal:
Tap the field where the SSID of the camera is displayed in the Wi-Fi settings and
select Forget. Select the camera SSID again and input the new password.
181
Other Settings (SETTING)
Formatting Built-in Memory or a Memory Card (Format)
Procedure
[MENU] * “¥ SETTING” Tab * Format
If a memory card is loaded in the camera, this operation will format the memory card.
It will format built-in memory if no memory card is loaded.
• The format operation will delete all contents on the memory card or in built-in
memory. It cannot be undone. Make sure you do not need any data currently on
the card or in built-in memory before you format it.
• Formatting built-in memory will delete the following data.
– Protected images
– “CUSTOM SHOT” setups
• Formatting a memory card will delete the following data.
– Protected images
• Formatting will cause all images to be deleted, even if file deletion is disabled
(“Disabled” selected for “Delete Key” (page 177)) for some images.
• Check the battery level before starting a format operation and make sure it is not
too low. Formatting may not be performed correctly and the camera may stop
operating normally if the camera powers down while formatting is in progress.
• Never open the battery cover while formatting is in progress. Doing so can cause
the camera to stop operating normally.
Resetting the Camera to Factory Defaults (Reset)
Procedure
[MENU] * “¥ SETTING” Tab * Reset
See page 200 for details about the camera’s factory default settings.
The settings below are not reset.
World Time settings, clock settings, date style, screen language
182
Other Settings (SETTING)
Appendix
Safety Precautions
*DANGER
This symbol indicates information that, if ignored or applied incorrectly, creates the
danger of death or serious personal injury.
*WARNING
This indication stipulates matters that have the risk of causing death or serious injury
if the product is operated incorrectly while ignoring this indication.
*CAUTION
This indication stipulates matters that have the risk of causing injury as well as
matters for which there is the likelihood of occurrence of physical damage only if the
product is operated incorrectly while ignoring this indication.
Symbol Examples
This circle with a line through it (-) means that the indicated action must not
be performed. Indications within or nearby this symbol are specifically
prohibited. (The example at left indicates that disassembly is prohibited.)
The black dot (0) means that the indicated action must be performed.
Indications within this symbol are actions that are specifically instructed to be
performed. (The example at left indicates that the power plug must be
unplugged from the electrical socket.)
*DANGER
. Rechargeable Battery
• To charge the battery, use only the method specifically described in this
manual. Attempting to charge the battery by an unauthorized means
creates the risk of battery overheating, fire, and explosion.
• Do not expose or immerse the battery in fresh water or salt water. Doing
so can damage the battery, and cause deterioration of its performance
and loss of service life.
• The battery is intended for use with a CASIO Digital Camera only. Use
with any other device creates the risk of the battery damage, or
deterioration of battery performance and service life.
183
Appendix
*DANGER
• Failure to observe any of the following precautions creates the risk of battery
overheating, fire, and explosion.
– Never use or leave the battery near open flame.
– Do not expose the battery to heat or fire.
– Make sure the battery is oriented correctly when charging it.
– Never carry or store the battery together with items that can conduct electricity
(necklaces, pencil lead, etc.).
– Never disassemble the battery, pierce it with a needle, or expose it to strong
impact (hit it with a hammer, step on it, etc.), and never apply solder to it.
Never place the battery into a microwave oven, dehumidifier, high-pressure
generating device, etc.
– Never remove the outer sticker from the battery.
• Should you ever notice leakage, strange odor, heat generation,
discoloration, deformation, or any other abnormal condition while using,
charging, or storing a battery, immediately remove it from the camera
and keep it away from open flame. Also, do not use the affected battery after the
abnormal symptoms disappear.
• Do not use or leave the battery under direct sunlight, in an automobile
parked in the sun, or in any other area subject to high temperatures.
Doing so can damage the battery, and cause deterioration of its
performance and loss of service life. Also, these conditions can cause the
battery to swell to the point that you may not be able to remove it.
• Battery fluid can damage your eyes. Should battery fluid get into your
eyes accidentally, immediately rinse them with clean tap water and then
consult a physician.
184
Appendix
*WARNING
. Smoke, abnormal odor, overheating, and other abnormalities
• Continued use of the camera while it is emitting smoke or strange odor,
or while it is overheating creates the risk of fire and electric shock.
Immediately perform the following steps whenever any of the above
symptoms are present.
1. Turn off the camera.
2. If you are using the USB-AC adapter to power the camera, unplug the power
plug from the power outlet. Also, remove the battery from the camera, taking
care to protect yourself against burn injury.
3. Contact your retailer or nearest CASIO authorized service center.
. Keep Away From Fire
• Never expose the camera to fire, which can cause it to explode and
creates the risk of fire and personal injury.
. Avoid Use While In Motion
• Never use the camera to record or play back images while operating an
automobile or other vehicle, or while walking. Looking at the monitor
while in motion creates the risk of serious accident.
. Flash and Other Light Emitting Functions
• Never use light emitting functions in areas where there is the chance of
flammable or explosive gas being present. Such conditions create the
risk of fire and explosion.
• Never fire the flash or use light emitting functions pointed in the direction
of a person operating a motor vehicle. Doing so can interfere with the
driver’s vision and create the risk of accident.
. USB-AC Adapter
• Misuse of USB-AC adapter creates the risk of fire and electric shock. Be sure to
observe the following precautions.
– Use only the specified USB-AC adapter.
– Never use the USB-AC adapter with another device.
– Use a power outlet that matches the power supply specified for the
USB-AC adapter.
– Never plug the USB-AC adapter or power cord into a wall outlet that is shared
by other devices, or into a shared extension cord.
– Never locate the USB-AC adapter near a stove or other heating device.
• Misuse of the USB-AC adapter can cause them to become damaged, creating
the risk of fire and electric shock. Be sure to observe the following precautions.
– Never place heavy objects on the USB-AC adapter or subject it to
direct heat.
– Do not modify the USB-AC adapter, allow it to become damaged, or
forcibly bend it.
– Do not twist or pull on the power cord.
– When in use, locate the cord where it will not be tripped over.
185
Appendix
*WARNING
• Never touch the power plug while your hands are wet. Doing so creates
the risk of electric shock.
• Should the power cord or power plug become damage, contact your
retailer or nearest CASIO authorized service center.
• Do not use the USB-AC adapter in areas where liquids* might spill on
them. Liquids create the risk of fire and electric shock.
* Liquids: Water, sports drinks, seawater, animal or pet urine, etc.
• Do not place a flower vase or any other liquid container on top of the
USB-AC adapter. Water creates the risk of fire and electric shock.
• Do not touch the camera or USB-AC adapter during lightning storms.
If a power cord was included with your camera
• The power cord that comes with the camera is designed for use in the
country where the camera was purchased. If you use the camera in
another country, be sure to use a power cord that conforms to that
country’s ratings and power supply voltage. Use of an improper power cord
creates the risk of fire and electric shock.
• Before going out, be sure to unplug the USB-AC adapter from the power
outlet and put in a place away from objects used by animals and pets.
An animal or pet chewing on the power cord can cause it short, leading
to the risk of fire.
. Water and Foreign Matter
• Water, other liquids, or foreign matter (especially metal) getting inside
the camera creates the risk of fire and electric shock. Immediately
perform the following steps whenever any of the above symptoms are
present. Particular care is required when using the camera where it is raining or
snowing, near the ocean or other body of water, or in a bathroom.
1. Turn off the camera.
2. If you are using the USB-AC adapter to power the camera, unplug the power
plug from the wall outlet. Also, remove the battery from the camera, taking
care to protect yourself against burn injury.
3. Contact your retailer or nearest CASIO authorized service center.
. Disassembly and Modification
• Never try to take the camera apart or modify it in any way. Doing so
creates the risk of electric shock, burn injury, and other personal injury.
Be sure to leave all internal inspection, maintenance, and repair up to
your retailer or nearest CASIO authorized service center.
186
Appendix
*WARNING
. Dropping and Rough Treatment
• Continued use of the camera after it is damaged by dropping or other
rough treatment creates the risk of fire and electric shock. Immediately
perform the following steps whenever any of the above symptoms are
present.
1. Turn off the camera.
2. If you are using the USB-AC adapter to power the camera, unplug the power
plug from the wall outlet. Also, remove the battery from the camera, taking
care to protect yourself against burn injury.
3. Contact your retailer or nearest CASIO authorized service center.
. Memory Cards
• Memory cards are small and present a risk of accidentally being
swallowed by infants and young children. Keep memory cards out of the
reach of infants and young children. If a memory card is ever swallowed
accidentally, contact a physician immediately.
. Precaution when Camera is On
• Do not touch the camera for long periods while it is on. The camera
becomes warm when on, and long term contact creates the risk of lowtemperature burns.
. Interference with other digital devices
• Should you notice radio interference or other problems on other devices
is being caused while using this product, do not use the wireless
functions of this product. Use of wireless functions creates the risk of
radio interference and abnormal operation of other devices.
• When in a medical facility or aircraft, comply with instructions of
personnel in charge. Electromagnetic waves and other signals emitted
by the camera’s wireless function create the risk of accident.
187
Appendix
*WARNING
• Do not use the camera’s wireless function while in the vicinity of high
precision digital devices or digital devices that use weak signals. Doing
so can interfere with proper operation of such digital devices and create
the risk of accident.
• When using the camera’s wireless function, keep it away from any
person wearing a pacemaker. Magnetism emitted by the camera may
affect cardiac pacemakers and other medical devices. Should you ever
notice any abnormality, immediately move away from the product and contact a
physician.
• On a crowded train or any other crowded location where there is the
possibility of being in the vicinity of a person wearing a cardiac
pacemaker, turn off the camera’s wireless function or turn off the
camera. Radio waves emitted by the camera’s wireless function may affect
pacemaker operation.
*CAUTION
. USB-AC Adapter
• Misuse of the USB-AC adapter creates the risk of fire and electric shock. Make
sure you observe the following precautions.
– Never cover the USB-AC adapter or power cord with a quilt, blanket,
or other cover while it is in use, and do not use it near a heater. Doing
so can interfere with heat radiation and cause the area around them
to become hot.
– Do not use detergent when cleaning the power cord, the USB-AC adapter, or
the USB cable (especially the plugs and jacks).
– Insert the power plug into the wall outlet as far as it will go.
– Unplug the power plug from the wall outlet before leaving the camera
unattended for long periods, such as when leaving on a trip, etc.
– At least once a year, use a cloth or vacuum cleaner to clean any dust build up
on the prongs of the power plug and in the area around them.
– (Power cord included with your camera) When unplugging from the wall outlet,
never pull on the power cord. Grasp the power plug and pull.
188
Appendix
*CAUTION
. Rechargeable Battery
• If battery charging does not end normally within the specified charging
time, stop charging anyway and contact your local CASIO authorized
service center. Continued charging creates the risk of battery
overheating, fire, and explosion.
• Be sure to read the user documentation that comes with the camera and
special charger unit before using or charging the battery.
• Store batteries in a location that cannot be reached by infants and young
children. When using a battery where infants and young children are
present, be on guard to ensure that they do not have the chance to
remove the battery from the charger unit or camera.
• Do not leave batteries near areas used by pets. A pet chewing on a
battery can lead to accidents caused by the battery leaking, overheating,
or exploding.
• Should fluid from a battery accidentally get onto clothing or your skin,
immediately rinse it off with clean tap water. Prolonged contact with
battery fluid can cause skin irritation.
. Connections
• Never plug any devices that are not specified for use with this camera
into connectors. Connecting a non-specified device creates the risk of
fire and electric shock.
. Unstable Locations
• Never place the camera on an unstable surface, on a high shelf, etc.
Doing so can cause the camera to fall, creating the risk of personal
injury.
. Locations To Be Avoided
• Never leave the camera in any of the following types of locations. Doing so
creates the risk of fire and electric shock.
– Areas subject to large amounts of humidity or dust
– Food preparation areas or other locations where oil smoke is present
– Near heaters, on a heated carpet, in areas exposed to direct sunlight,
in a closed vehicle parked in the sun, or other areas subject to very high
temperatures
189
Appendix
*CAUTION
. Monitor Screen
• Do not apply strong pressure to the LCD panel surface or subject it to
strong impact. Doing so can cause the display panel glass to crack and
lead to personal injury.
• Should the monitor screen ever become cracked, never touch any of the
liquid inside the monitor screen. Doing so creates the risk of skin
inflammation.
• Should monitor screen liquid ever get into your mouth, immediately rinse
your mouth out and contact your physician.
• Should monitor screen liquid ever get into your eyes or onto your skin,
immediately rinse with clean water for at least 15 minutes and contact
your physician.
. Backing Up Important Data
• Always keep backup copies of important data in camera memory by
transferring it to a computer or other storage device. Note that data can
be deleted in the case of camera malfunction, repair, etc.
. Memory Protection
• Whenever replacing the battery, be sure to follow the correct procedure
as described in the documentation that comes with the camera.
Incorrectly replacing the battery can result in corruption or loss of data in
camera memory.
. Flash and Other Light Emitting Functions
• Never fire the flash or use light emitting functions pointed in the direction
of and too close to a person’s face. Doing so creates the risk of loss of
eyesight. In the case of infants and young children in particular, keep the
light source at least one meter away the eyes.
• Take care that your fingers, glove, or other items are not touching the
flash window when you shoot. Touching the flash window can lead to
burn injury, smoke, discoloration, or other problems.
• Do not fire the flash while the flash window is dirty, dusty, or soiled with
foreign matter. Doing so can lead to smoke emission and discoloration.
190
Appendix
Precautions During Use
. Data Error Precautions
Your digital camera is manufactured using precision digital components. Any of the
following creates the risk of corruption of data in camera memory.
– Removing the battery or memory card while the camera is performing some
operation
– Removing the battery or memory card while the back lamp is flashing green after
turning off the camera
– Disconnecting the USB cable while communication is in progress
– Shooting with a battery that quickly goes low right after it is charged
• Shooting with a battery that quickly goes low right after it is charged can also
cause camera malfunction. Replace the battery with a new one immediately.
– Other abnormal operations
Any of the above conditions can cause an error message to appear on the monitor
screen (page 208). Perform the action indicated by the message that appears.
. Operating Environment
• Operating Temperature Requirements: 0 to 40°C (32 to 104°F)
• Operating Humidity: 10 to 85% (non condensation)
• Do not place the camera in any of the following locations.
– In an area exposed to direct sunlight, or large amounts of moisture, dust, or sand
– Near heating or cooling devices, or in other areas subjected to extreme changes
in temperature or humidity
– Inside of a motor vehicle on a hot day, or in an area subjected to strong vibration
. Condensation
Sudden and extreme temperature changes, such as when the camera is moved from
the outdoors on a cold winter day into a warm room, can cause water droplets called
“condensation” to form on the interior and the exterior of the camera, which creates
the risk of malfunction. To prevent condensation from forming seal the camera in a
plastic bag before changing locations. Then leave the bag sealed to allow the air
inside to naturally change to the same temperature as the air in the new location.
After that, remove the camera from the bag and open the battery cover for a few
hours.
191
Appendix
. Lens
• Never apply too much force when cleaning the surface of the lens. Doing so can
scratch the lens surface and cause malfunction.
• You may sometimes notice some distortion in certain types of images, such as a
slight bend in lines that should be straight. This is due to the characteristics of
lenses, and does not indicate malfunction of the camera.
. Caring for your camera
• Never touch the lens or flash window with your fingers. Finger smudges, dirt, and
other foreign matter on the lens or flash window can interfere with proper operation
of the camera. Use a blower or other means to keep the lens and flash window free
of dirt and dust, and wipe gently with a soft, dry cloth.
• To clean the camera, wipe it with a soft, dry cloth.
. Old Rechargeable Battery Handling Precautions
• Insulate the positive and negative terminals with tape, etc.
• Do not peel the covering off of the battery.
• Do not try to take the battery apart.
. Precautions when using the wireless LAN function
This product uses wireless data communication which can cause interference with or
be subject to interference by other nearby devices.
Radio transmission interception
Note that the radio waves that are used to send and receive data can be intercepted
by third parties.
Unauthorized access
CASIO COMPUTER CO., LTD. shall be held in no way liable for any unauthorized
access and/or use of the access point equipped on this product if the product is ever
lost or stolen.
Use as a wireless LAN device
Use the wireless LAN function of this product only as specifically described in this
manual. Any other use is unintended use, and CASIO COMPUTER CO., LTD. shall
be held in no way liable for any damages arising out of unintended use.
Magnetism, electrostatic charge, and radio interference
Do not use this product near a microwave oven or any other area where magnetism,
electrostatic charge, or radio interference is generated. Radio wave reception may be
poor in certain environments.
Also note that other devices using the same 2.4GHz band used by this product may
cause reduced processing speeds in both devices.
Connecting to a public LAN
This product does not support wireless LAN connection over a public wireless LAN
environment.
192
Appendix
Intended Areas of Use
1)The wireless LAN functions of this camera are provided for use in the countries and
geographic areas below.
Hong Kong, Singapore, Thailand, The United Arab Emirates (UAE), Paraguay,
Venezuela, Panama, Germany, Austria, France, The Netherlands, Spain, Italy, Sweden,
Denmark, Slovakia, Poland, and Norway
2)Approval for use under radio regulations in the countries and geographic areas below is
granted only when the camera is purchased within that particular country or geographic
area.
Taiwan, Indonesia, Malaysia, and South Korea
. Discarding or Transferring Ownership of a Memory Card or the
Camera
The format and delete functions of the camera do not actually delete files from the
memory card. The original data remains on the card. Note that responsibility for the
data on a memory card lies with you. The following procedures are recommended
whenever you discard a memory card or the camera, or if you transfer ownership to
another party.
• When discarding a memory card, either physically destroy the memory card or use
commercially available data delete software to completely delete the data on the
memory card.
• When transferring ownership of a memory card to another party, use commercially
available data deletion software to completely delete the data on it.
• Use the format function (page 182) to completely delete the data in built-in memory
before discarding or transferring ownership of the camera.
. Other Precautions
The camera becomes slightly warm during use. This is normal and does not indicate
malfunction.
193
Appendix
. Copyrights
Except for your own personal enjoyment, unauthorized use of snapshots or movies of
images whose rights belong to others, without the permission of the right holder, is
forbidden by copyright laws. In some cases, shooting of public performances, shows,
exhibitions, etc. may be restricted entirely, even if it is for your own personal
enjoyment. Regardless of whether such files are purchased by you or obtained for
free, posting them on a website, a file sharing site, or any other Internet site, or
otherwise distributing them to third parties without the permission of the copyright
holder is strictly prohibited by copyright laws and international treaties. For example,
uploading or distributing on the Internet images of TV programs, live concerts, music
videos, etc. that were photographed or recorded by you may infringe upon the rights
of others. Note that CASIO COMPUTER CO., LTD. shall not be held liable for use of
this product in any way that infringes on the copyrights of others or that violates
copyright laws.
The following terms, which are used in this manual, are registered trademarks or
trademarks of their respective owners.
Note that trademark ™ and registered trademark ® are not used within the text of this
manual.
• SDXC Logo is a trademark of SD-3C, LLC.
• Microsoft, Windows, Internet Explorer, Windows Media, Windows Vista,
Windows 7, Windows 8, Windows 8.1 and DirectX are registered trademarks or
trademarks of Microsoft Corporation in the United States and other countries.
• Macintosh, Mac OS, QuickTime, and iPhoto are trademarks of Apple Inc.
• HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing, LLC.
• Android and Google Play are trademarks or registered trademarks of Google Inc.
• App Store is a service mark of Apple Inc.
• iOS is a trademark or registered trademark of Cisco Systems, Inc. of the United
States.
• Wi-Fi is a registered trademark of the Wi-Fi Alliance.
• EXILIM and EXILIM Remote are registered trademarks or trademarks of CASIO
COMPUTER CO., LTD.
• All other company or product names mentioned herein are registered trademarks
or trademarks of their respective companies.
Any and all unauthorized copying, distribution, and transfer for commercial purposes
of the software provided by CASIO for this product are prohibited.
194
Appendix
OpenVG 1.1 Reference Implementation
Copyright (c) 2007 The Khronos Group Inc.
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and /or associated documentation files
(the "Materials "), to deal in the Materials without restriction,
including without limitation the rights to use, copy, modify, merge,
publish, distribute, sublicense, and/or sell copies of the Materials,
and to permit persons to whom the Materials are furnished to do so,
subject to the following conditions:
The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Materials.
THE MATERIALS ARE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE MATERIALS OR
THE USE OR OTHER DEALINGS IN THE MATERIALS.
195
Appendix
Power Supply
Charging
. If the camera’s back lamp starts flashing red...
If the back lamp starts flashing red during charging, it means that further charging is
not possible for one of the reasons below. Perform the actions described below to
correct the problem and then try charging again.
Ambient temperature or the temperature of the battery is abnormally high
or low
Unplug the USB cable from the camera and wait for a while until the camera is within
the temperature range of 15°C to 35°C (59°F to 95°F), and then try charging again.
Safety timer activated
A battery that has not been used for a long time, certain types of computers, and
connection conditions can cause charging to take longer than normal. If charging
takes longer than about 5 hours, a safety timer will terminate it automatically, even if
the battery is not fully charged. If the battery has not been used for a very long time,
charging may terminate automatically after only about 60 minutes.
1) Using a battery that has not been used for a long time.
Disconnect and then reconnect the USB cable to resume charging.
2) Insufficient power supply when connected to computer
The camera can be charged only via a USB 2.0 standard USB port. Connect
directly to a USB port what supplies a current of 500mA.
For details about the power supply capacity of a computer’s USB port, contact the
manufacturer of the computer. Though disconnecting and then reconnecting the USB
cable will resume charging, you may need to do so repeatedly if the power supply
capacity of the computer is low.
If problems persist after you perform the above steps or if the battery fails to
charge after 5 hours, it could mean that the battery is faulty. Contact your nearest
CASIO authorized service center.
196
Appendix
Battery Precautions
. Precautions during Use
• Operation provided by a battery under cold conditions is always less than operation
under normal temperatures. This is due to the characteristics of the battery, not the
camera.
• Charge the battery in an area where the temperature is within the range of 15°C to
35°C (59°F to 95°F). Outside this temperature range charging can take longer than
normal or even fail.
• Do not tear or remove the battery outer label.
• If a battery provides only very limited operation following a full charge, it probably
means the battery has reached the end of its service life. Replace the battery with a
new one.
. Storage Precautions
• Storing the battery for a long time while it is charged can cause deterioration of
battery characteristics. If you do not plan to use a battery for some time, fully use
up its charge before storing it.
• Always remove the battery from the camera when you are not using it. A battery left
in the camera can discharge and go dead, which will require some time to charge
when you need to use the camera.
• Store batteries in a cool, dry place (20°C (68°F) or lower).
• To prevent over discharging of an unused battery, fully charge it, and then load it in
the camera and fully use up the charge about once every six months.
Using the Camera in another Country
. Precautions during Use
• The bundled USB-AC adaptor is designed for operation with any power supply in
the range of 100V to 240V AC, 50/60Hz. Note, however, that the shape of the
power plug depends on each country or geographic area. Before taking the camera
and USB-AC adaptor along on a trip, check with travel agent about the power
supply requirements in your destination(s).
• Do not connect the USB-AC adaptor to a power supply through a voltage converter
or similar device. Doing so can lead to malfunction.
. Extra Batteries
• Taking along extra fully charged batteries (NP-130A) is recommended while on a
trip in order to avoid not being able to shoot images due to the battery going dead.
197
Appendix
Using a Memory Card
See page 25 for information about supported memory cards and how to load a
memory card.
. Using a Memory Card
• SD memory cards, SDHC memory cards, and SDXC
memory cards have a write protect switch. Use the
Write enabled
switch when you need to guard against accidentally
deleting data. Note, however, if you write protect an
SD memory card you must then turn write protection
Write disabled
off whenever you want to record to it, format it, or
delete any of its images.
• If a memory card starts to behave abnormally during
image playback, you can restore normal operation by reformatting it (page 182).
However, it is recommended that you always take along multiple memory cards
whenever using the camera far away from the home or office.
• As you record data to and delete data from a memory card a number of times, it
loses its ability to retain data. Because of this, periodic re-formatting of a memory
card is recommended.
• Electrostatic charge, electrical noise, and other phenomena can cause data to
become corrupted or even lost. Make sure that you always back up important data
on other media (CD-R, CD-RW, hard disk, etc.).
. Memory Card Handling Precautions
Certain types of memory cards can slow down processing speed. Whenever possible
use an Ultra High-Speed Type memory card. Note, however, that not all operations
can be guaranteed even if an Ultra High-Speed Type memory card is used. Certain
movie quality settings can result in too much time being required to record data,
which can result in breaks in the image and/or audio during playback. If this happens,
the Y will turn yellow on the monitor screen.
198
Appendix
. Discarding or Transferring Ownership of a Memory Card or the
Camera
The format and delete functions of the camera do not actually delete files from the
memory card. The original data remains on the card. Note that responsibility for the
data on a memory card lies with you. The following procedures are recommended
whenever you discard a memory card or the camera, or if you transfer ownership to
another party.
• When discarding a memory card, either physically destroy the memory card or use
commercially available data delete software to completely delete the data on the
memory card.
• When transferring ownership of a memory card to another party, use commercially
available data deletion software to completely delete the data on it.
Use the format function (page 182) to completely delete the data in built-in memory
before discarding or transferring ownership of the camera.
199
Appendix
Reset Initial Default Settings
The tables in this section show the initial default settings that are configured for menu
items (displayed when you press [MENU]) after you reset the camera (page 182).
Menu items depend on whether the camera is in the REC mode or PLAY mode.
• A dash (–) indicates an item whose setting is not reset or an item for which there is
no reset setting.
IMPORTANT!
• Depending on the recording mode, some of the items on the menu that appears
may not be usable.
. r REC MENU
Remote Capture –
Metering
Multi
Motion Shutter
Off
Flash Intensity
Motion Position
Upper left
Sharpness
Control Dial
Off
Saturation
Off
Contrast
AF Assist Light
On
Review
Type 2
Icon Help
On
Shooting Info
Grid: Off /
Histogram: Off /
Movie Range: Off
Memory
High Speed CS:
Off /
Flash: On /
Focus: Off /
ISO: Off /
White Balance: Off /
EV Shift: Off /
AF Area: On /
Metering: Off /
Self-timer: Off /
Flash Intensity: Off /
Zoom (SR): On /
Digital Zoom: On /
MF Position: Off /
Zoom Position: Off
L/R Key
Double (HDR
Art)
On
Image Size
16M
Image Quality
Normal
Movie Quality
FHD
ISO
Auto
ISO High Limit
Auto
Anti Shake
Standard
Zoom (SR)
Single
Digital Zoom
On
Focus
AF
Face Detection
Off
AF Area
U Spot
Make-up Level
Depends on the
recording mode.
Continuous AF
Off
Lighting
On
Wind Noise Cut
Off
EV Shift
0.0
White Balance
Auto WB
Self-timer
Off
200
Appendix
. p PLAY MENU
Quick Send
–
White Balance
–
Send to phone
–
Brightness
–
View on phone
–
DPOF Printing
–
Control Dial
1 image
Protect
–
Date/Time
–
Slideshow
Images:
All images /
Time: 30 min /
Interval: 3 sec /
Effect: Pattern 1
Rotation
–
Resize
–
Trimming
–
Make Movie
–
Copy
–
Movie Editing
–
CS Multi Print
–
Movie Merge
–
Divide Group
–
MOTION PRINT
Create
Edit Group
–
Lighting
–
. ¥ SETTING
ECO Mode
Off
Auto Power Off
5 min
Screen
Auto
REC
Off
PLAY
Power On
Delete Key
Enabled
World Time
–
Adjust
–
Date Style
–
Language
–
HDMI Output
Auto
–
Resize before
send
3M
Sounds
Startup: Sound 1 /
Half Shutter:
Sound 1 /
Shutter: Sound 1 /
Operation:
Sound 1 / Operation
Vol: 3 /
Playback Vol: 3
Create Folder
–
WLAN
password
Timestamp
Off
Format
–
Auto Rotate
On
Reset
–
File No.
Continue
Sleep
1 min
201
Appendix
When things don’t go right...
Troubleshooting
Problem
Possible Cause and Recommended Action
Power Supply
Power does not
turn on.
1)The battery may not be loaded correctly (page 18).
2)The battery may be dead. Charge the battery (page 19). If the
battery goes dead soon after being charged, it means the
battery has reached the end of its life and needs to be
replaced. Purchase a separately available CASIO NP-130A
rechargeable lithium ion battery.
The camera
suddenly powers
down.
1)Auto Power Off may have activated (page 176). Turn power
back on.
2)The battery may be dead. Charge the battery (page 19).
3)The camera’s protection function may have activated
because camera temperature is too high. Turn off the camera
and wait until it cools down before trying to use it again.
Power will not turn
off. Nothing
happens when a
button is pressed.
Remove the battery from the camera and then reload them.
Charging
The back lamp
does not light red
and the battery
won’t charge.
1)Unplug the USB cable from the camera and then plug it back
in again.
2)Remove the battery from the camera and then reload it (page
19).
Image Recording
Image is not
recorded when the
shutter button is
pressed.
1)If the camera is in the PLAY mode, press the shutter button to
enter the REC mode.
2)If the flash is charging, wait until the charge operation
finishes.
3)If the message “Memory Full” appears, transfer images to
your computer, delete images you no longer need, or use a
different memory card.
Auto Focus does
not focus properly.
1)If the lens is dirty, clean it off.
2)The subject may not be in the center of the focus frame when
you compose the image.
3)The subject you are shooting may not be a type that is
compatible with Auto Focus (page 37). Use manual focus
(page 44).
4)You may be moving the camera when shooting. Try shooting
with Anti Shake or use a tripod.
202
Appendix
Problem
Possible Cause and Recommended Action
The subject is out
of focus in the
recorded image.
The image may not be focused properly. When composing the
image, make sure the subject is located inside the focus frame.
The flash does not
fire.
1)If ? (Flash Off) is selected as the flash mode, change to
another mode (page 49).
2)If the battery is low, charge it (page 19).
3)If a BEST SHOT scene that uses ? (Flash Off) is selected,
change to a different flash mode (page 49) or select a
different BEST SHOT scene (page 77).
The red ? (Flash
Off) icon is
displayed on the
monitor screen and
the flash does not
fire.
The flash unit may be malfunctioning. Contact a CASIO
authorized service center or your original retailer. Note that
though the flash will not fire, you still can use the camera for
non-flash shots.
Camera powers
down during Selftimer countdown.
The battery may be low. Charge the battery.
The monitor screen 1)You may be using Manual Focus and have not focused the
image is out of
image. Focus the image (page 44).
focus.
2)You may be using ´ (Macro) for scenery or portraits. Use
Auto Focus for scenery and portrait shots (page 44).
3)You may be trying to use Auto Focus when shooting a closeup shot. Use the ´ (Macro) for close ups (page 44).
There is digital
noise in images.
1)Sensitivity may have been increased automatically for a dark
subject, which increases the chance of digital noise. Use a
light or some other means to illuminate the subject.
2)You may be attempting to shoot in a dark location with
? (Flash Off) selected, which can increase digital noise and
make images appear coarse. In this case, turn on flash (page
49) or use lights for illumination.
3)Lighting (page 110) may be enabled for snapshots, which can
cause an increase in digital noise. Use a light or some other
means to illuminate the subject.
4)Shooting movies for long periods in areas where temperature
is relatively high can cause digital noise (dots of light) to
appear in the movie image. If this happens, move to a cooler
environment or turn off the camera and allow it to cool down,
which should cause normal operation to resume.
203
Appendix
Problem
Possible Cause and Recommended Action
A recorded image
was not saved.
1)Camera power may have been turned off before the save
operation was complete, which will result in the image not
being saved. If the battery indicator shows
, charge the
battery as soon as possible (page 23).
2)You may have removed the memory card from the camera
before the save operation was complete, which will result in
the image not being saved. Do not remove the memory card
before the save operation is complete.
Though available
lighting is bright,
the faces of people
in the image are
dark.
Not enough light is reaching the subjects. Change the flash
mode setting to < (Flash On) for daylight synchro flash (page
49), or adjust EV shift to the + side (page 48).
Night shots come
out bad.
Use the following BEST SHOT scenes (page 77) when shooting
at night.
• HS Night Scene (for shooting night scenery only)
• HS Night Scene and Portrait (for shooting people against
night scenery)
Subjects are too
dark when shooting
images in a
seashore or ski
area.
Sunlight reflected by water, sand, or snow, can cause
underexposure of images. Change the flash mode setting to
< (Flash On) for daylight synchro flash (page 49), or adjust EV
shift to the + side (page 48).
Digital zoom will
not go up to the
maximum value.
1)The digital zoom setting may be turned off. Turn on digital
zoom (page 107).
2)Zoom will not go up to the maximum value if the “Zoom (SR)”
setting is “Single”. Change the setting to “Off” (page 55).
3)Zoom will not go up to the maximum value if the snapshot
size setting is something other than “VGA”. Change to a
different setting (page 101).
The image is out of
focus during movie
recording.
1)Focusing may not be possible because the subject is outside
the focus range. Shoot within the allowable range.
2)The lens may be dirty. Clean the lens (page 192).
3)During High Speed Movie recording, focus is fixed at the
position where it was when recording started. To focus an
image, half-press the shutter button for Auto Focus or focus
manually before you press [0] (Movie) to start recording.
Movie recording
suddenly stops.
The camera’s protection function may have activated because
camera temperature is too high. Wait until the camera
temperature drops to normal levels.
The monitor screen
goes blank and
camera operation
becomes disabled.
Selecting S or M for the recording mode and using a slow
shutter speed will cause the monitor screen to go blank during
the period from when the shutter button is pressed until image
recording is complete. Camera operations are disabled during
this time. Wait until the back lamp goes out and an image
appears on the monitor screen again.
204
Appendix
Problem
Possible Cause and Recommended Action
I can’t change the
settings of menu
items. Menu items
for some settings
are not displayed
on the menu.
Some menu items may not be available, depending on the
recording mode in use. While Premium Auto Pro is in use, only
the menu items whose settings can be configured will be
displayed on the menus.
Playback
The color of the
playback image is
different from what
appears on the
monitor screen
when shooting.
Sunlight or light from another source may be shining directly
into the lens when you are shooting. Position the camera so
sunlight does not shine directly into the lens.
Images are not
displayed.
This camera cannot display non-DCF images recorded onto a
memory card using another digital camera.
Images cannot be
Note that you cannot edit the following types of snapshots.
edited (with White
• Snapshots created using MOTION PRINT
Balance,
• CS and interval shot group snapshots
Brightness, Resize, • Movies
Trimming,
• Panorama Image
Rotation).
• Snapshots recorded with another camera
File Deletion
A file cannot be
deleted.
1)The file may be protected. Unprotect the file (page 137).
2)“Delete Key” setting may be “Disabled”. Change the setting to
“Enabled” (page 177).
Wireless LAN
I can’t establish a
wireless LAN
connection.
The wireless LAN
connection is
broken.
1)The camera cannot connect with a smartphone if they are too
far apart from each other.
2)The smartphone may be connected with another wireless
LAN. Check the smartphone’s Wi-Fi settings and confirm that
the camera is selected for wireless LAN connection (page
146).
3)Connection may have been lost due to interference caused
by a nearby microwave oven, cordless phone, or other
wireless LAN device. Move the camera away from the device
causing the problem.
205
Appendix
Problem
Possible Cause and Recommended Action
Other
The wrong date
and time are
displayed, or the
wrong date and
time are being
stored along with
image data.
The date and time setting is off. Set the correct date and time
(page 179).
The messages on
the display are in
the wrong
language.
The wrong display language is selected. Change the display
language setting (page 180).
Images cannot be
transferred over a
USB connection.
1)The USB cable may not be connected securely. Check all
connections.
2)If the camera is not turned on, turn it on.
3)Your computer may not be able to recognize the camera if
you connect via a USB hub. Always connect directly to the
computer’s USB port.
4)USB communication may not be possible when the battery
level indicator is
. Charge the battery before connecting.
Language selection 1)You did not configure initial settings after purchasing the
screen appears
camera or the camera may have been left with a dead
when the camera is
battery. Configure the correct settings (pages 23, 180).
turned on.
2)There may be a problem with the camera’s memory data. If
this is the case, perform the reset operation to initialize the
camera’s setup (page 182). After that, configure each setting.
If the language selection screen does not re-appear when you
turn the camera on, it means that the camera’s memory
management data has been restored.
If the same message appears after you turn power back on,
contact your retailer or a CASIO authorized service center.
There are various
indicators and
values on the
monitor screen.
The monitor screen shows indicators and other information
about shooting conditions and the image you are recording. You
can use [8] (DISP) to select what information you want to
include on the display (page 12).
206
Appendix
Problem
Possible Cause and Recommended Action
The time and date
settings configured
the first time after
purchasing the
camera are reset to
their factory
defaults when I
remove the
camera’s battery.
Load the camera’s battery and reconfigure the time and date
settings (page 23). Do not remove the battery from the camera
for at least 24 hours after configuring time and date settings.
After that, the settings will not be reset if you remove the
battery.
• If the time and date are reset to their factory default settings
when you remove the battery after it has been loaded for
more than 24 hours, it could mean that the camera’s setting
memory is defective. Contact your retailer or a CASIO
authorized service center.
Buttons are not
responsive right
after the power has
been turned on.
With large capacity memory cards there is a delay after the
power has been turned on before the buttons become
responsive.
207
Appendix
Display Messages
ALERT
The camera’s protection function may have activated
because camera temperature is too high. Turn off the
camera and wait until it cools down before trying to use it
again.
Battery is low.
Battery power is low.
Can not find the file.
The image you specified with the slideshow “Images”
setting cannot be found. Change the “Images” setting (page
128) and try again.
There is something wrong with the memory card. Turn off
the camera, remove the memory card and then reload it
into the camera. If this message re-appears when you turn
the camera back on, format the memory card (page 182).
Card ERROR
IMPORTANT!
• Formatting a memory card deletes all its files. Before
formatting, try transferring recoverable files to a
computer or some other storage device.
Communication
stopped.
This message appears when the wireless LAN connection
is broken for some reason during data communication
between the camera and smartphone.
File could not be
saved because
battery is low.
Battery power is low, so an image file could not be saved.
Folder cannot be
created.
You are trying to record a file while there are already 9999
files stored in the 999th folder. If you want to record more,
delete files you no longer need (page 35).
LENS ERROR
This message appears and the camera turns off whenever
the lens performs some unexpected operation. If the same
message appears after you turn power back on, contact a
CASIO authorized service center or your original retailer.
LENS ERROR 2
The Anti Shake unit of the camera may be malfunctioning.
If the same message appears after you turn power back on,
contact your retailer or a CASIO authorized service center.
Memory Full
Memory is full with images you recorded and/or files saved
by editing operations. When shooting with Prerecord CS,
this message indicates that there is not enough memory
capacity to record all of the pre-recorded images. Delete
files you no longer need (page 35).
Open the flash unit.
You are trying to shoot with flash while the flash unit is
closed. Slide the flash switch to open the flash unit.
208
Appendix
Record Error
Image compression could not be performed for some
reason during image data recording. Perform a zoom
operation to change the composition of the image and
shoot it again.
RETRY POWER ON
The lens came into contact with an obstruction while
moving. The camera will turn off automatically when this
message appears. Remove the obstruction and turn power
back on again.
SYSTEM ERROR
Your camera system is corrupted. Contact your retailer or a
CASIO authorized service center.
The card is locked.
The LOCK switch of the SD, SDHC, or SDXC
memory card loaded in the camera is in the
locked position. You cannot store images to
or delete images from a memory card that is
locked.
There are no files.
There are no files in built-in memory or on the memory
card.
There is no image to
register.
The setup you are trying to save is for an image that cannot
be saved as a user “CUSTOM SHOT” scene.
This card is not
formatted.
The memory card loaded in the camera is not formatted.
Format the memory card (page 182).
This file cannot be
played.
The file you are trying to access is corrupted or is a type
that cannot be displayed by this camera.
LOCK
This message will appear part way through an operation
This function cannot
when you attempt to use a function that is not allowed in
be used.
combination with another function.
209
Appendix
Number of Snapshots/Movie Recording Time
Snapshot
Image Size
(Pixels)
16M
(4608x3456)
3:2
(4608x3072)
16:9
(4608x2592)
10M
(3648x2736)
5M
(2560x1920)
3M
(2048x1536)
VGA
(640x480)
Quality
File Size
Built-in Memory*1
Recording
Capacity
SD Memory Card*2
Recording
Capacity
Fine
10.71 MB
XXX
1072
Normal
5.57 MB
XXX
1654
Fine
9.43 MB
XXX
1214
Normal
4.92 MB
XXX
1873
Fine
7.83 MB
XXX
1466
Normal
4.1 MB
XXX
2221
Fine
6.4 MB
XXX
1787
Normal
3.38 MB
XXX
2728
Fine
2.99 MB
XXX
2990
Normal
1.72 MB
XXX
4283
Fine
2.0 MB
XXX
4669
Normal
1.25 MB
XXX
6533
Fine
430 KB
XXX
19683
Normal
290 KB
XXX
26809
210
Appendix
Movies
Image Size/
Approximate Data
Pixels
Rate (Frame Rate)
(Audio)
Maximum
File Size
Built-in
Memory*1
Recording
Capacity
Maximum
Continuous
Recording File Size of
Recording
1-minute
Time with
Time per
SD Memory
Movie
Movie*3
Card*
FHD
14.2 Megabits/
(1920x1080)
second
(Stereo)
(30 frames/second)
XXX seconds
2 hours
13 minutes
106.5 MB
29 minutes
HD
(1280x720)
(Stereo)
10.9 Megabits/
second
(15, 20, 30 frames/
second)
XXX seconds
*4
2 hours
53 minutes
*4
81.8 MB
*4
29 minutes
*4
STD
(640x480)
(Stereo)
3.9 Megabits/second
(30 frames/second)
XXX seconds
8 hours
12 minutes
29.3 MB
29 minutes
HS1000
(224x64)
(No audio)
40.0 Megabits/
second
(1000 frames/
second)
XXX seconds
48 minutes
300.0 MB
13 minutes
10 seconds
HS480
(224x160)
(No audio)
40.0 Megabits/
second
(480 frames/second)
XXX seconds
48 minutes
300.0 MB
13 minutes
2 seconds
HS240
(512x384)
(No audio)
40.0 Megabits/
second
(240 frames/second)
XXX seconds
48 minutes
300.0 MB
12 minutes
58 seconds
HS120
(640x480)
(No audio)
40.0 Megabits/
second
(120 frames/second)
XXX seconds
47 minutes
300.0 MB
12 minutes
55 seconds
HS30-240
(512x384)
(Audio
recording at
30 fps only)
5.4 Megabits/second
(30 frames/second)
40.4 Megabits/
second
(240 frames/second)
XXX seconds
*5
5 hours
59 minutes
*5
40.5 MB
*5
29 minutes
*5
HS30-120
(640x480)
(Audio
recording at
30 fps only)
10.4 Megabits/
second
(30 frames/second)
40.4 Megabits/
second
(120 frames/second)
XXX seconds
*5
3 hours
5 minutes
*5
78.0 MB
*5
29 minutes
*5
4GB or
29 minutes
*1 Built-in memory capacity after formatting (Approx. XX.XMB)
*2 When using a 16GB SDHC memory card (SanDisk Corporation). Number of image and
recording time values depend on the memory card you are using.
*3 The allowable recording time will be shorter if the capacity of the SD memory card you
are using is smaller than the maximum size of one file.
*4 Values when shooting with “ART SHOT”.
211
Appendix
*5 Recordable time when the entire movie is recorded at 30 fps. Recording time is shorter
if the 30 fps frame rate is switched to 120 fps or 240 fps during recording.
• Snapshot and movie recording capacity values are approximate and intended for
reference only. Actual capacity depends on image contents.
• File size and data rate values are approximate and intended for reference only. Actual
values depend on the type of image being shot.
• When using a memory card with a different capacity, calculate the number of images as a
percentage of 16GB.
• The time it takes to play back a high speed movie will be different from the time it takes to
record it. If you record a 240 fps high speed movie for 10 seconds, for example, it will
take 80 seconds to play it back.
212
Appendix
Specifications
File Format
Snapshots:
RAW (DNG)*, JPEG (Exif Version 2.3; DCF 2.0 standard;
DPOF compliant)
Movies:
MOV format, H.264/AVC standard, IMA-ADPCM (stereo)
* DNG file format is one type of RAW image file, and it is
recommended by Adobe Systems Incorporated for use as a
standard image file format.
Recording Media
Built-in Memory (Image Storage Area: XX.XMB*)
SD/SDHC/SDXC
* Built-in memory capacity after formatting
Recorded Image Sizes Snapshots:
16M (4608x3456), 3:2 (4608x3072), 16:9 (4608x2592),
10M (3648x2736), 5M (2560x1920), 3M (2048x1536),
VGA (640x480)
Movies:
FHD (1920x1080 30 fps),
HD (1280x720 15 fps/20 fps/30 fps)*,
STD (640x480 30 fps), HS1000 (224x64 1000 fps),
HS480 (224x160 480 fps), HS240 (512x384 240 fps),
HS120 (640x480 120 fps),
HS30-240 (512x384 30 fps/240 fps switchable),
HS30-120 (640x480 30 fps/120 fps switchable)
* Can be selected only when shooting with “ART SHOT” or
some Time Lapse scenes.
Effective Pixels
16.1 Megapixels
Imaging Element
Size: 1/2.3-inch square pixel high-speed CMOS
Total Pixels: 16.79 Megapixels
Lens/Focal Distance
F3.5 (W) to 5.9 (T) f = 4.5 to 81.0 mm
(equivalent to 25 to 450 mm in 35 mm format)
Zoom
18.0X Optical zoom, 36.0X in combination with Multi SR Zoom
4X Digital zoom
Up to 286.9X when HD Zoom and Digital zoom are used in
combination (VGA size)
Focusing
Contrast Detection Auto Focus; with AF assist light
• Focus Modes:
Auto Focus, Macro Focus, Infinity, Manual Focus
• AF Area:
Intelligent, Spot, Multi, Tracking
Approximate Focus
Range
(From Lens Surface)
Auto Focus: 4 cm to 9 (1.6" to 9) (Wide Angle)
Macro Focus: 4 cm to 50 cm (1.6" to 19.7") (Wide Angle)
Manual Focus: 4 cm to 9 (1.6" to 9) (Wide Angle)
• Range is affected by optical zoom.
Metering
Multi-pattern, center weighted, and spot by imaging element
Exposure Control
Program AE, Aperture Priority AE, Shutter Speed Priority AE,
Manual Exposure
213
Appendix
Exposure
Compensation
–2.0 EV to +2.0 EV (in 1/3EV steps)
Shutter
CMOS electronic shutter, mechanical shutter
Shutter Speed
Snapshot (Program Auto): 1/4 to 1/2000 second
Snapshot (Premium Auto Pro): 4 to 1/4000 second
Snapshot (Aperture Priority AE): 1 to 1/2000 second
Snapshot (Shutter Speed Priority AE): 15 to 1/2000 second
Snapshot (Manual Exposure): 15 to 1/2000 second
• 1/25000-second shutter speed is possible only with High
speed Continuous Shutter, shutter speed priority AE or
manual exposure.
• May differ due to the camera setup.
Aperture Value
F3.5 (W) to F7.0 (W) (With ND filter)
• Using optical zoom changes the aperture value.
White Balance
Auto, Daylight, Overcast, Shade, Day White Fluorescent,
Daylight Fluorescent, Tungsten, Manual WB
Sensitivity
(Standard Output
Sensitivity)
Snapshots:
Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800,
ISO 1600, ISO 3200 equivalent
Snapshots (HS Night Shot):
ISO 25600 equivalent maximum
Movies: Auto
Flash Modes
Auto, Off, On, Red-eye reduction
Flash Range
0.4 m to 3.5 m (1.3' to 11.4') (Wide Angle)
(ISO Sensitivity: Auto) 1.5 m to 2.1 m (4.0' to 6.9') (Telephoto)
• Range is affected by optical zoom.
Flash Intensity
Adjustment
–2, –1, 0, +1, +2
Flash Charging Time
Approximately 5 seconds
Wireless data transfer Standard: IEEE 802.11b/g/n
Operation frequency range: 1 to 11ch
Encryption: WPA2
Monitor Screen
3.0-inch TFT color LCD (Super Clear LCD)
921,600 dots
External connection
terminal
Micro USB port (Hi-Speed USB compliance, USB charging)
HDMI output (Micro/TypeD)
Microphones
Stereo
Speaker
Monaural
Power Requirements
Rechargeable lithium ion battery (NP-130A) x1
214
Appendix
Approximate Battery Life
All of the values provided below represent the approximate amount of time under
normal temperature (23°C (73°F)) before the camera turns off. These values are not
guaranteed. Low temperatures shorten battery life.
Number of Shots (Operating Time)*1
Number of Shots
XXX shots
(ECO)*1
XXX shots
Actual movie recording time (FHD Movie)*1
X hours XX minutes
Approximate continuous movie recording time (FHD Movie)*2 X hours XX minutes
Approximate continuous movie recording time
(High speed movie (HS 240))*2
X hours XX minutes
Approximate time lapse recording time*2 (FHD Movie*3)
X hours XX minutes
Continuous Playback
(Snapshots)*4
X hours XX minutes
• Temperature: 23°C (73°F)
• Battery: NP-130A (Rated Capacity: 1800 mAh)
• Recording Medium: 16GB SDHC memory card (SanDisk Corporation)
*1 In accordance with CIPA (Camera and Imaging Products Association) standards
*2 In accordance with CASIO standards
*3 Other settings
Time Lapse scene: » Standard, Recording interval: 1/2 seconds, Total time: Off,
Sleep: 1 minute
*4 One-image scroll approximately every 10 seconds
• The above values are based a new battery, starting from a full charge. Repeated
charging shortens battery life.
• The above values are for reference only. They do not guarantee that the specified
battery life will be attained under actual operating conditions.
• Frequency of flash, zoom, Auto Focus, and High Speed CS usage, configured
settings, the amount of time the camera is left turned on, and ambient temperature
in the area where the camera is used all greatly affect recording time and number
of shots values.
Power Consumption
3.7 V DC, Approximately XX.X W
Dimensions
XX.X (W) x XX.X (H) x XX.X (D) mm
(XX.X" (W) x XX.X" (H) x XX.X" (D))
(XX.X mm (XX.X") thick excluding projections)
Weight
Approximately XXX g (XX.X oz)
(including battery and memory card*)
Approximately XXX g (XX.X oz)
(excluding battery and memory card)
* 16GB SDHC memory card (SanDisk Corporation)
215
Appendix
. Rechargeable lithium ion battery (NP-130A)
Rated Voltage
3.7 V
Rated Capacitance
1800 mAh
Operating Temperature
Requirements
0 to 40°C (32 to 104°F)
Dimensions
37.8 (W) x 44.8 (H) x 11.2 (D) mm
(1.49" (W) x 1.76" (H) x 0.44" (D)) (excluding projections)
Weight
Approximately 38 g (1.3 oz)
. USB-AC adaptor (AD-C54UC)
Input Power
100 to 240 V AC, 50/60 Hz, 90 mA
Output Power
5.0 V DC, 650 mA
Operating Temperature
Requirements
5 to 35°C (41 to 95°F)
Dimensions
64.6 (W) x 38.4 (H) x 24 (D) mm
(2.5" (W) x 1.5" (H) x 0.9" (D)) (excluding projections)
Weight
Approximately 40 g (1.4 oz)
. USB-AC adaptor (AD-C53U)
Input
100 to 240 V AC, 50/60 Hz, 100 mA
Output
5.0 V DC, 650 mA
Operating Temperature
Requirements
5 to 35°C (41 to 95°F)
Dimensions
53 (W) x 21 (H) x 45 (D) mm
(2.1" (W) x 0.83" (H) x 1.8" (D)) (excluding projections)
Weight
Approximately 37 g (1.3 oz)
• Power cord precautions for use in Singapore
The power cord set is not supplied. The power cord used must comply with
relevant national and/or international standards.
216
Appendix
Declaration of Conformity According to EU Directive
Manufacturer:
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan
Responsible within the European Union:
CASIO EUROPE GmbH
Casio-Platz 1, 22848 Norderstedt, Germany
The copy of the Declaration of Conformity can be found on
http://world.casio.com/ce/dc/.
To comply with the relevant European RF exposure compliance requirements, a
separation distance of at least 20cm in WLAN operation must be maintained
between the EX-ZR850 and the operator body. This EX-ZR850 must not be
co-located or operating in conjunction with other transmitter.
Note: This equipment is intended to be used in all EU and EFTA countries.
Outdoor use may be restricted to certain frequencies and/or may require a license
for operation.
For more details, contact your customer service representative.
Hereby, CASIO Europe GmbH, Casio-Platz 1, 22848 Norderstedt, Germany,
declares that this Digital Camera Model EX-ZR850 is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
217
Appendix
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
M29
MA1404-A
2014

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : FrameMaker 7.1
Modify Date                     : 2014:03:25 12:17:35+09:00
Create Date                     : 2014:02:03 18:29:36Z
Metadata Date                   : 2014:03:25 12:17:35+09:00
Format                          : application/pdf
Title                           : EXZR850_M29_e_shinsei.book
Creator                         : CASIO COMPUTER CO., LTD.
Document ID                     : uuid:f0f596d1-ab67-41b3-af62-9ee7154d7908
Instance ID                     : uuid:1d956b01-597f-4af1-9a32-c6c7177318a4
Page Mode                       : UseOutlines
Page Count                      : 220
Author                          : CASIO COMPUTER CO., LTD.

EXIF Metadata provided by EXIF.tools