Mitsumi Electric Co OXYWA Wireless Adapter for OXY User Manual WirelessAdapter Manual R
Mitsumi Electric Co Ltd Wireless Adapter for OXY WirelessAdapter Manual R
Users Manual
Wireless Adapter Instruction Manual
1. Features
The Wireless Adapter is a peripheral device for the OXY. Network play for a maximum of
five players is possible by connecting the Wireless Adapter to a OXY.
2. Connection
After confirming that the Power Switch is OFF on the OXY, plug in the Wireless Adapter 8
PIN plug into the OXY External Extension Connector.
3. Use
The Wireless Adapter will automatically begin to operate after being connected to the OXY
and turning the Power Switch ON.
4. Specifications
Model name: OXY-004
Dimensions: 44.0 mm (width) x 21.9 mm (height) x 21.4 mm (depth)
Weight: approx. 7 g
Radio Frequency: 2.4 GHz bandwidth, ISM band
5. FCC Certification, Instructions to the User
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
• Change the direction the Wireless Adapter is facing.
• Consult the dealer or an experienced radio/TV technician for help
In addition, this device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NEED HELP WITH INSTALLATION, MAINTENANCE OR SERVICE?
Customer Service
Visit www.nintendo.com
or call 1-800-255-3700
Mon – Sat: 6:00 a.m. to 9:00 p.m. (Pacific Time)
or Sun: 6:00 a.m. to 7:00 p.m. (Pacific Time)
(Times subject to change)
Nintendo of America Inc.
P. O . B o x 957
Redmond, WA 98073-0957
U.S.A.
www.nintendo.com