Miwa Lock ALV2P ALV2(P) User Manual ALV2P and ALV2A

Download:
Mirror Download [FCC.gov]
Document ID	1332521
Application ID	PVVEIIfSbkpW7NtOoFiyOg==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.4kB (142513 bits)
Date Submitted	2010-08-25 00:00:00
Date Available	2010-08-27 00:00:00
Creation Date	2010-08-02 19:31:05
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2010-08-02 19:31:09
Document Title	Microsoft Word - ALV2P and ALV2A-User Manual.doc
Document Creator	Word 用 Acrobat PDFMaker 7.0.7
Document Author:	加茂　実知生

Confidential
User Manual
User Manual
Product Name
Hotel Card Lock
Model
ALV2 P / ALV2 A type
Version 1.0
July 6, 2010
Miwa Lock Co., Ltd.
Miwa Lock Co.,Ltd.
1/10
Confidential
User Manual
1. Introduction
1.1. ALV2 Hotel Card Lock
This document applies to the ALV2 Hotel Card Lock. It is card reader of the Card Lock
system for the contactless IC card “Mifare” issued by special issuing machines.
Miwa Lock Co.,Ltd.
2/10
Confidential
User Manual
2. Outline of the Unit
2.1. Cards
The ALV2 Hotel Card Lock is used as a card key reader for the contactless IC card Mifare.
(1) The Mifare card is issued by special issuing machine, so that card data are protected
sturdy. As a result, the card is very difficult to copy, alter or forge.
(2) It is possible to use for various purpose that utilize the features of Mifare.
When additional use is necessary, please inquire to us. We are ready to furnish the
information.
2.2. Outline of Functions
2.2.1. Data Verification
(1) Unlocking can be performed simply by holding up the card near the ALV2 Hotel Card Lock.
(2) Unlocking will be done only when the input data set up beforehand in the ALV2 Hotel Card
Lock(room number and time, etc) and the data in the card key are compared and matched.
(3) When a re-issued card key is used to the lock, it becomes no longer possible to use the
old card. Therefore when the card is lost, once a re-issued card is used to the lock there is
no chance to open the door by someone else with old card.
(4) When a valid card key is used, the “Verification OK” lamp will light up green, whereupon the
door will be unlocked while a preset time. If the card does not match the Lock, the
“Verification NG” lamp will light up red, and the door will stay locked.
Miwa Lock Co.,Ltd.
3/10
Confidential
User Manual
2.2.2. Operation record
(1) This unit can record up to 600 cases of lock / opening operation with the card key in order
of the operation. Once 600 operations are recorded, new operations are over written on the
oldest ones.
(2) Operations that show a verification error are also recorded up to 100 times in order of
recent date, as per the lock-opening operation.
2.2.3. Battery Power / Buzzer
(1) This unit has the circuit of Main battery and Sub-power Supply.
(2) The circuit of main battery is used normally and in case of emergency the Sub-Power
Supply will be used.
(3) Four pieces of AA type Alkaline batteries are used for main battery and supply 3Vdc.
(Series-Parallel connection)
(4) The main battery will last for about one and half years if the unit operates 10 times per day.
(5) If the Master Card or Sub Master Card is used during the battery power runs low, the user
will be informed by LED and buzzer that exchange of battery is necessary.
(6) The buzzer can be set in the “On” or “Off” position from the data input unit.
Table 2.1: Alarm sound
Conditions
Alarm sound
Card Key Verification OK
Pi…
Card Key Verification NG
Pi, pi…
Low Battery Power
Pi, pi, pi…
Miwa Lock Co.,Ltd.
4/10
Initial setting
Off
On
Confidential
User Manual
2.2.4. Other Functions
(1) Entry / Confirmation of the lock-setting data on confirmation of the record-of-use data is
performed using a data input unit by IrDA Communication function (infrared light
communication)
(2) Lock-setting data and record-of-use data are stored in the flash memory so the data will
never be lost even if the batteries run out.
(3) The lock clock will be backed up for about 5 minutes without main battery such as
replacement of the batteries.
2.3. Mechanisms
2.3.1. Locking Mechanisms
(1) Non-latch mode – Once the card is verified and the door is unlocked, the door is
automatically locked again after preset time. When performing unlocking by key, thumb
turn, or lever handle in the room, the door will automatically lock once the door has been
opened and closed.
(2) Latch mode – Continuous opening and continuous locking are repeated alternately using
the card.
Note:Non-latch mode / latch mode can be switched using the lock setting data.
2-3-2. Double Locking Mechanism
(1) When the door is locked by the thumb turn key from inside of the room, the deadbolt will
protrude and the door will be double locked.
(2) Double locking cannot be annulled from outside of the room other than using the
emergency card. (emergency unlocking).
* Unlocking of the “double locking” becomes effective with Guest Card, Master Card, and
Submaster Card depending on the lock settings.
(3) If a card that cannot open the double locked door is used, the Verification NG Lamp will
light up red.
Miwa Lock Co.,Ltd.
5/10
Confidential
User Manual
2.3.3. Anti-panic mechanism
(1) The door will unlock simply by turning the lever handle from inside of the room even in a
state of double lock.
(2) When the door is unlocked using the lever handle from inside the room, it will automatically
lock again once the door has opened and closed.
Miwa Lock Co.,Ltd.
6/10
Confidential
User Manual
3. General Specifications
3.1. Name
Product Name:
ALV2 P / ALV2 A type Hotel Card Lock
Product Number:
Cylinder type
: ALV2□△○※☆-1
Cylinder less type : ALV2□△○※☆-3
□ = U/E
(Lock case type)
△ = P/A
(Escutcheon design)
○ = S/H/R
(Thumb turn type)
※ = A/B/C/D/E/F/G/H
(Armor front type)
☆ = 17/19/66/67/74/476/478
(Handle design)
3.2. Physical Specifications
Attachable handle type:
17・19・66・67・74・476・478
Attached cylinder type:
U9
Back set:
70/100 mm
Material /Finish
Stainless / Hairline finish
(ST)
Stainless / Buff finish
(SB)
Stainless / PVD Gold Hairline finish (PH)
Stainless / PVD Gold Buff finish
Brass
/ Hairline finish
(BS)
Brass
/ Buff finish
(YB)
(PB)
Battery Box
ABS (Series-Parallel connection)
Range of door thickness
35 – 75 mm
Convenience
Right and left turning available (opening inwards)
3.3. Power Supply
Main Battery
Use:
Normal condition use
Voltage:
3.0Vdc
Batter:
4 pieces of AA type Alkaline batteries
Series-Parallel connection
Battery life:
Approximately one and a half years
(if operated 10 times/day)
Sub-power Supply
Use:
Emergency condition
※Using an external battery power supply DC 3.0V.
Miwa Lock Co.,Ltd.
7/10
Confidential
User Manual
3.4. Environment Specifications
Environmental conditions
Operating temperature: 0˚C to +40˚C
(without condensation)
Range of humidity: 35 to 85% RH
Installation
Keep out of wind and rain and away from direct
Sunlight
Dust
Normal office amounts
Miwa Lock Co.,Ltd.
8/10
Confidential
User Manual
4. Detail of Function
4.1. General Operations (Non-latch mode)
(1) The ALV2 Hotel Card Lock functions by inputting lock-setting data
Lock-setting data includes the hotel code, room number, and time (clock), and the ALV2
Hotel Card Lock validates the card key if the lock setting data in the card and the ALV2
Hotel Card Lock are matched.
(2) A card issued using a special issuing unit is held up near the ALV2 Hotel Card Lock for
about one second. When the card is fully read by the card lock, the decoding lamp will light
up orange. Once the decoding lamp lights up, the verification result is displayed.
•In the case of a valid card:
“Verification OK” lights up green during setting period and the
door is unlocked. When the unlock lamp turns off, the door automatically locks.
•In the case of an invalid card:
The “Verification NG” lamp lights up red, and the door
stays locked.
(3) Double locking cannot be annulled from outside of the room other than using the
emergency card. (emergency unlocking).
* Unlocking of the “double locking” becomes effective with Guest Card, Master Card, and
Submaster Card depending on the lock settings.
(4) When unlocking is performed with the emergency card, the door becomes continuously
unlocked. This will return to normal situation when lock and unlock the door by using the
thumb turn.
(5) A data history of the unlocking operations (at Verification OK) and errors will be
Recorded in the ALV2 Hotel Card Lock.
(6) When battery power is running low, the user will be informed of that the exchange of the
batteries is necessary by LED and buzzer, if the Master Card or Submaster Card is used
(→Low battery detection function).
(7) When leaving the room, simply turning the lever handle will unlock the door.
This is the same even when the door is double locked (→Anti-panic mechanism).
(8) Room entering history and lock status information are recorded on the Master Card and
Submaster Card (→Audit trail function).
Miwa Lock Co.,Ltd.
9/10
Confidential
User Manual
5. Regulatory Compliance
5-1. USA-Federal Communications Commission (FCC)
This unit has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This unit generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this unit does cause harmful interference to radio or television
reception, which can be determined by turning the unit off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the unit and receiver.
- Connect the unit into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
This unit complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This unit may not cause harmful interference, and (2) This unit must accept any
interference received, including interference that may cause undesired operation.
Caution:
Any changes or modifications not expressly approved by the party responsible for
product compliance could void the user's authority to operate the unit.
Labeling
MIWA LOCK ALV2 Hotel Card Lock is labeled as below.
FCC ID: VBU –ALV2P
The proposed FCC ID label format is to be placed on the module. If FCC ID is not
visible when the module is installed into the system, “Contains FCC ID: VBU –ALV2P”
shall be placed on the outside of final host system.
Miwa Lock Co.,Ltd.
10/10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Source Modified                 : D:20100802103037
Creator Tool                    : Word 用 Acrobat PDFMaker 7.0.7
Modify Date                     : 2010:08:02 19:31:09+09:00
Create Date                     : 2010:08:02 19:31:05+09:00
Metadata Date                   : 2010:08:02 19:31:09+09:00
Document ID                     : uuid:b764b77f-b659-44de-b39b-60e4b0e4d3dc
Instance ID                     : uuid:461d25d0-c770-4254-9bd3-5eb2564c67cf
Version ID                      : 6
Format                          : application/pdf
Title                           : Microsoft Word - ALV2P and ALV2A-User Manual.doc
Creator                         : 加茂　実知生
Subject                         : 
Headline                        : 
Page Count                      : 10
Page Layout                     : OneColumn
Author                          : 加茂　実知生

EXIF Metadata provided by EXIF.tools