Mobi Technologies 70055T Digital Video Baby Monitor User Manual

Mobi Technologies, Inc. Digital Video Baby Monitor Users Manual

Users Manual

Compable with...
Wireless
Audio/Video
Monitoring
System
Compatiblewith…
Compatiblewith…
TABLE OF CONTENTS
Introducon 1
Package Contents 2
Features 3
Consumer Guide to Product
Safety
4-5
Knowing your Receiver 6
Knowing Your Camera 7
Installaon & Setup 8
Monitor Operaon 9-10
Camera Operaon 11
Audio/Video & USB Operaon 12
Troubleshoong 13
Radio Interference Advice 14
Warranty 15
Notes 16
INTRODUCTION
Congratulaons on the purchase of the MobiCam Digital DL Monitoring Sys-
tem, which brings you the latest in wireless technology. We are sure that you
will be pleased with the quality and features of this product but recommend
that you read these instrucons carefully before use in order to fully benet
from its many features.
The MobiCam Digital DL enables you to transmit picture and sound wirelessly,
which is ideal for many situaons such as monitoring a baby, young children,
pets, or elderly. Addionally it can also be used for household security or as an
oce or warehouse surveillance system.
Your MobiCam DL uses digital transmission to ensure a clear and consistent
picture. The signal also passes easily through interior walls. However, buildings
with metal frames or placing the camera near large metal objects may cause
signal degradaon. If recepon is poor, moving the camera or receiver may x
this problem.
1
PACKAGE CONTENTS FEATURES
1 x Receiver Unit
1 x Camera Unit (#70056, addional cameras sold separately)
1 X Receiver Power Cord
1 X Camera Power Cord
1 x AV cable
1 set of mounng screws and anchors
NOTE: If you nd any of the contents are missing or should you need to order replace-
ment parts, please contact the manufacturer or visit www.getmobi.com.
2
FEATURES
• 2.4” Color High Resoluon TFT LCD Display
• Voice Acvated Picture & Sound with Auto Mute
• Audio Only Mode
• No installaon needed—ready to use
• Compact design for easy portability
• Transmission range up to 300 .
• Powerful Night Vision with 20 . range
• Extra Wide Camera Viewing Angle
• Expandable up to 4 Cameras with automac camera scanning opon
• Camera operates on AC or 4 AA Alkaline Baeries (not included).
• Monitor operates on AC or 5 Alkaline AA Baeries (not included)
• Oponal rechargeable baery pack is available (item # 70077).
• USB Output for PC connecon
• Use as a wireless webcam
3
CONSUMER GUIDE TO PRODUCT SAFETY
Please read this instrucon manual before using your MobiCam Digital DL sys-
tem. When using electrical appliances, basic safety precauons should always
be followed.
Please keep safe for future reference.
• This product is not intended to be used as a medical monitor and its
use should not replace adult supervision.
• Periodically examine this product for damage to the cord, housing or
other parts that may result in the risk of re, electric shock or injury.
Do not operate any product with a damaged cord or plug. If the Color
Wireless Monitor malfuncons or is damaged in any manner please
contact the manufacturer for examinaon and repair to avoid a hazard.
• Never use transmier and receiver near water (i.e. bathtub, sink, etc.).
• The AC adaptors are not Toys.
4
• Always use transmier and receiver where there is adequate
venlaon. To prevent overheang, keep away from heat sources
such as radiators, heat registers, stoves, or other appliances that
produce heat.
• Use only a dry coon cloth to keep the Camera and Monitor units
free of dust. Do no use a dampened cloth, water, or liquid cleaner
of any kind.
• Remove the baery from the Monitor during long periods of non-
use as alkaline baeries can leak.
• Unplug the AC adaptors from the Monitor and Camera during peri
ods of non-use. To disconnect from the power supply, grip the
transformer and pull from the power socket. Never pull by the
cord.
• Replace baery with the same equivalent type. Please dispose of
old, defecve baeries in an environmentally friendly manner in
accordance with the relevant legislaon.
• Only use the Monitoring System with the supplied power adaptors.
5
KNOWING YOUR RECEIVER
1. TFT LCD Display
2. Control (+) (-)
3. Mode Buon
4. Power indicator
5. Sound Bar LEDs
6. Speaker
7. Volume and power On/O switch
8. Mini USB Output
9. DC Jack
10. A/V Jack
6
KNOWING YOUR CAMERA
11. Camera Lens
12. Power indicator
13. Mic
14. Night Vision Sensor
15. Link Buon
16. Power On / O
17. DC Jack
7
INSTALLATION & SETUP
The MobiCam Digital DL Monitor is designed to be powered by either baeries
or the AC/DC adaptors. You can also purchase a rechargeable baery pack (item
# 70077) available at getmobi.com or retailer to use with your monitor.
Using AC/DC adaptor:
• Plug the connector of the AC adaptor into the DC Jack on the unit (g.
9 & 17).
• Plug the power cord into an outlet.
• Switch the power plug to the ON posion (g. 7 & 16)
• The power indicator lights will illuminate once the units are turned on
(g. 4 & 12)
Using Baeries:
• Remove the baery door at the boom/back of each unit by loosening
the child-safe screw and sliding the cover downward to release.
• Both units can use 1.5 volt AA size baeries. (Always use baeries of
the same brand and age, alkaline baeries are recommended)
Insert 4 AA baeries into camera and 5 AA baeries into the monitor.
• Replace the covers by aligning the tabs with the tab holes and ghten
ing the child-safe screws.
Please note that the life of baeries is limited. Therefore, when monitoring over
long periods and, in parcular, overnight, it is recommended to use AC adaptors
for both the camera and the monitor unit.
Warning:
1. Do not mix old and new baeries.
2. Do not mix alkaline, standard or rechargeable baeries
3. Remove the baeries during long periods of non-use.
4. Use only the AC adaptors supplied with the package.
Oponal Baery Pack:
The Monitor on your system has a built-in baery recharging circuit. Make sure
you only use the oponal baery pack (Item # 70077), as standard rechargeable
baeries will not recharge.
Note: Camera unit does not recharge baeries.
8
MONITOR OPERATION
Power ON/OFF
Use the volume and ON/OFF switch (g. 7) on the side of the unit to turn On
and O. To adjust the volume use the ON/OFF switch to scroll to the desired
level.
Channel Selecon
Press the Mode Buon on the front of the monitor 1 me to enter the channel
selector mode, use the side “+” and “-” control buons (see g. 2) to change
the Channel or to set your monitor to Scan mode. The display will indicate the
selected channel during the channel selecon process on the boom of the
screen.
Automac Channel Scan
This opon allows the Monitor to scan through all 4 channels automacally and
stops at each channel for approximately 5 seconds in order to monitor mulple
locaons.
“Scan Select Mode”- Selecng which camera to Scan
To set your monitor to scan certain channels while in scan mode, press the
Mode Buon 4 mes unl the Scan Select menu appears. Use the Mode buon
to scroll through the available channels and the “+” and “-” control buons (see
g. 2) to select and deselect the desired channel(s).
“Camera Selecon”- Add or Remove Cameras
To remove paired cameras, press the Mode buon 8 mes unl the Paired
Select menu appears. Use the Mode buon to scroll through the available chan-
nels and the “+” and “-” controls (see g. 2) to select or remove the camera.
Note: You must re-link your camera once it has been removed in order to be able to view
the camera again (see page 12 for linking instrucons).
9
CAMERA OPERATIONMONITOR OPERATION
LCD On/O
Press the Mode Buon and hold for 3 seconds unl the LCD screen is o. This
feature enables you to use the monitor as an audio only system allowing you to
conserve power.
To deacvate, press the Mode Buon for 3 seconds.
Brightness Control
The brightness on the LCD screen can be adjusted by pressing the Mode buon
2 mes and using the “+ “& “–“ control buons (g. 2) unl the desired level is
reached.
Voice Acvaon (VOX)
Voice Acvaon (VOX) mode allows your monitor to go to sleep mode when
there is no sound in the room. The monitor will automacally turn on when the
camera detects noise– subject to the factory preset sound level. This feature
allows you to conserve baery power.
NOTE: The Monitor will automacally switch to standby mode if no signal is received
from the Camera
To Acvate / Deacvate: Press the Mode buon3 mes and the VOX icon will
appear. Your monitor will display “VOX” when this feature is turned on. Use the
“ + “ & “ - “ control buons (g. 2) to turn the funcon on or o.
10
Mode buon
Power ON/OFF
Use the ON/OFF switch (g. 16) to turn the unit On and O.
Infrared Night Vision Mode (Automac)
The infra-red night vision mode will switch on automacally during darkness or
periods of low levels of light. In this mode only black and white images will be
displayed on the monitor. For best image clarity objects should be placed within
20  of the camera.
Addional Cameras
(#70056, addional cameras sold separately)
This product is designed to allow monitoring dierent areas with up to 4 cam-
eras (Channel 1, 2, 3 and 4). The Monitor and Camera will be inially paired and
set on channel 1.In order to add addional cameras to your system, you will
need to link the camera to your monitor before use.
1. Select the desired channel (see page 10) on your monitor.
2. Press the link buon on the side of your camera (g. 15), the power
indicator will begin to ash indicang your camera is ready to be
linked.
3. Press the “+ “& “-“ control buons (g. 2) simultaneously unl the im
age appears on the screen.
CAMERA OPERATION
11
AUDIO/VIDEO & USB OPERATION
Audio/Video& USB Output
Your monitor is equipped with both an A/V output and USB output so that you
can connect your monitor to a TV, DVR, VCR or computer so that you can cap-
ture video and sound from the camera transmission.
Note: The monitor screen turns o automacally when A/V cable or USB cable is used.
The screen will turn back on when the cable is removed.
A/V Cable Connecon
The A/V Output Jack is located on the le side of the monitor (g. 10). Simply
connect the supplied AV Connector Cord to the jack and connect the other ends
(three RCA connectors) to the Audio and Video input jacks on your TV, VCR or
Camcorder and select the appropriate input on your device. The monitor screen
will automacally turn o signaling the unit is connected. (Please refer to your
device manual for input selecon & operaon)
USB Connecon
Note: You will need to install the USB driver before using the USB connecon to your PC.
Use a standard Mini USB cable available at retail stores (not included) to con-
nect your monitor to your PC.
The USB output is located on the le side of the monitor (g. 8). Please be sure
to visit our website at www.getmobi.com to download the device driver.
Once you have installed the device driver your MobiCam DL can be ulized as
a wireless webcam. The unit can be used in conjuncon with Skype®, Win-
dows Messenger®, Google Talk® and Yahoo Messenger®. Addionally you can
purchase the MobiCam Anywhere Soware and set your monitor for scheduled
recordings, connuous recording and remote viewing via any PC or windows
enabled cell phone. For more informaon visit www.getmobi.com
12
TROUBLESHOOTING
Problem Soluon
No Image
• Monitor or Camera has not been turned on.
• Check AC/DC connecon
• Conrm power outlet is working properly.
• Baery is low (check Led indicator: Full Power
Green; Low Power - Red)
• Wrong Channel (Please note the monitor will
return to Channel 1 automacally aer power
o)
• VOX mode is on, See Page 11
Only Sound is
Funconing
• LCD screen is O, See Page 10
• Low Power (Check LED indicator: Full Power
Green; Low Power – Red)
Only Black & White
picture displayed
• Camera may have switched to “Infrared Night
Vision Mode,” See Page 12
Baery does not
recharge
• AC/DC adaptor has not been connected.
• Non-rechargeable baery has been used,
See Page 9
Camera will not link • Unit has not been switched on.
• AC/DC adaptor has not been connected.
• Check to make sure you are making contact
with the link buon.
• Check to make sure you are selecng the
correct channel
Screen turns on and o • “VOX” mode is selected, when there is no noise
detected by the camera the screen and audio
turn o, See page 11
• Baeries are low, LED indicator will be red
Channels Keep Switching • Conrm status of scan mode, See page 10
13
RADIO INTERFERENCE ADVICE WARRANTY
FCC Statement
This device complies with part 15 of the FCC Rules. Operaon is subject to the
following two condions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operaon.
Any changes or modicaons not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC Radiaon Exposure Statement:
This equipment complies with FCC radiaon exposure limits set forth for un
-
controlled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. This transmier
must not be co-located or operang in conjuncon with any other antenna or
transmier. This equipment complies with FCC RF radiaon exposure limits set
IC STATEMENT:
Operaon of this device is subject to the following two condions:
1. this device may not cause interference, and
2. this device must accept any interference, including interference that
may cause undesired operaon of the device.
14
controlled environment.The model70055T should be installed and operated with
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
transmier.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
instructions, may cause harmful interference to radio communications.
radio frequency energy and, if not installed and used in accordance with the
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
the receiver is connected.
WARRANTY
Mobi Technologies, Inc. warrants this product to be free from defects in materi-
al and workmanship for a period of ninety (90) days from the date of purchase.
Should this product prove to be defecve at any me during the warranty peri-
od, Mobi Technologies, Inc. will, at its opon, either replace or repair it without
charge. Aer the warranty period, a service charge will be applied for replace-
ment of parts or labor for repair. To obtain warranty service, please return the
product to Mobi along with a dated sales receipt from the place of purchase.
Purchaser is responsible for shipping the product to Mobi Technologies, Inc. at
the address indicated below and for all associated freight and insurance costs.
This warranty does not cover damage caused by accident, misuse, abuse, im-
proper maintenance, unauthorized modicaon, or connecon to an improper
power supply. A charge will be made for repair of such damage. This warranty
excludes all incidental or consequenal damages and any liability other than
what is stated above. © 2011 Mobi Technologies, Inc. All Rights Reserved.
Mobi Technologies, Inc.
5913 Blackwelder St
Culver City CA 90232
Toll Free Number (877) 662-4462
www.getmobi.com
Mobi and MobiCam are registered trademarks of Mobi Technologies, Inc.
© 2011 Mobi Technologies, Inc. All Rights Reserved
Please register your product at: www.getmobi.com/registerproduct.php
15
may cause undesired operation of the device.
this device must accept any interference, including interference that
this device may not cause interference, and
Operation of this device is subject to the following two conditions:
IC STATEMENT:
1.
2.
IC STATEMENT
this device must accept any interference, including interference thatthis device must accept any interference, including interference that
this device may not cause interference, and
may cause undesired operation of the device.
NOTES

Navigation menu