Mobi Technologies 70208R MobiCam DXR Touch Wireless Monitoring System User Manual

Mobi Technologies, Inc. MobiCam DXR Touch Wireless Monitoring System Users Manual

Users Manual

IMPORTANT: Keep instructions for future reference.70208CompleteOperatingInstructionsCompleteOperatingInstructionsCompleteOperatingInstructions
1INTRODUCTIONCongratulations on the purchase of this MobiCam® DXR Touch Monitoring System, which incorporates the latest advanced technology. To fully maximi-ze and benet from this product’s avanced features we hightly recommend you review these instructions. This 2.4 GHz Digital monitor enables you to transmit picture and sound signals cordlessly, which is ideal for many situa-tions suchs as monitoring a baby, young children or the elderly or used as oce or warehouse monitoring system.RADIO INTERFERENCE PARAMETERS FCC Statement15.19: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful inter-ference and (2) This device must accept any interference received, including interference that may cause undesired operation.15.21: Changes or modications not expressly approved by the party respon-sible for compliance could void the user’s authority to operate the equipment.FCC Radiation Exposure StatementThis equipment has been tested and complies with Federal Communications Commission radiation exposure limits as set forth for uncontrolled environ-ments. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This Camera must not be co-located or operating in conjunction with any other antenna or Cam-era. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or Camera. This device has been tested for compliance with FCC RF Exposure (SAR) limits in the typical laptop computer conguration and this device can be used in desktop or laptop computers via side mounted USB slots. This device and its antenna must not be co-located or operated in conjunction with any other antenna or Camera.IC StatementOperation of this device is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any inter-ference, including interference that may cause undesired operation of the device.TABLE OF CONTENTS Introduction 1 Radio Interferece Parameters 1 Package Contents 2 Monitor/Receiver 2 Camera/Transmitter 3 To Start Charging/Powering On 4 Locking the Screen 4 Set to Another Language 4 Pairing Camera and Monitor 5 Main Menu 6 Touch Navigation Volume/Display 7 Lullabys 7 Night Light 7 Record 8 Play 9 Quad and Channel View 10 VOX (Voice Activation) 10 Settings Monitor Settings 11-14 Camera Settings 15 Per Camera and Convenience Icons 16 Webcam Use • Data/File Transfers 17 Audio/Video Out 18 Troubleshooting 18 Factory Default Settings 19 Battery Replacement 20 Product Safety 20 Proper Disposal 21 Limited Warranty 21 About Mobi® / Contact Mobi® 22IMPORTANT: Use ONLY a ngertip or other NON-SHARP object to select touch screen options. Using sharp objects can damage the screen and void the warranty.
2 3CAMERAMONITORPACKAGE CONTENTS• 1 Monitor/Receiver • 1 Camera/Transmitter • 2 AC/DC Adaptors 5V 800mAh • 1 Li-Ion Rechargeable Battery (for monitor only)• 1 Attachable Strap Mount • 1 Door/Drawer Attachable Hook• 1 Wall Anchor Mount with Screw • 1 USB to Mini USB Data Cord• 1 AV-Out Cable • 1 User Manual PAIR ButtonStrap Mount (underneath)Power ON LED IndicatorCameraLensNight Light Night VisionIR LEDsDC Power Input2-Way Talk / Lullaby SpeakerMicrophoneON / OFF ButtonBattery CompartmentRetractable AntennaRidge-GripSurface Stand Positioning/Mounting Options A. Horizontal to Slightly Angled Surfaces - Built-in Ridge-Grip Feet… B. Wall Mount Screw with Drywall Anchor (included)… C. Door or Drawer Hook Mount / Stand (included)… D. Horizontal Rails / Drawer Handles - Attachable Strap Mount (included)Camera / Transmitter Unit features:• PAIR Button • LED for Power ON / Pairing (ashes)• Microphone & Speaker• DC Input (AC/DC adaptor included)• Night Vision• Temperature Sensor and Alarm• VOX (Hi/Mid/Lo/O) with receiver control• Adjustable Volume from receiver• Adjustable TX Power (High-Low) from receiver• 4 Lullaby choices• Night Light• Rechargeable Battery 3.7V 1500 mAh (not included - sold separately)• 2.4GHz Digital FHSS, 100% secure with full privacy and interference freeMonitor / Receiver Unit features:• 3.5” QVGA resolution TFT touch panel screen• VGA resolution (640*480) up to 25 frames per second• up to 250-300m range• 2-way communication• MENU/ESCAPE button• PAIR Button• TALK Button • Lock Screen Button for disabling touch screen• SD Card Slot up to 32 Gb (not included)• Mini USB Output port (for connection to a PC and charging)Power ON LED IndicatorRetractable Antenna2-Way Talk SpeakerON/OFFButtonLock ScreenButtonBatteryCompartmentPAIRButtonCombo Screen Cover / Fold-back StandEscape/Menu Button2-Way TalkButtonAVOutputDC Power Input /Mini USB Output2-Way TalkMicrophoneSD Card Slot(card not included)• A/V Output port• DC Input (AC/DC adaptor included)• Two-Color LED: solid green for power on; ashing red for charging• Quad-View split screen (up to 4 camera capability)• Main Menu color icon display • Rechargeable Li-ion Battery 3.7V 1200 mAh (included for monitor only)A. B.C. D.A. B.C. D.WARNING: To prevent strangulation never place a power cord within reach of a child.
TO STARTA. Plug one of the AC/DC adapters (they are interchangeable) into the monitor and allow it to charge the Monitor Battery for at least 5-1/2 hours. B. Plug the other AC/DC adapter into the camera. Turn the Camera On by holding the ON/OFF Button down for several seconds. The green “Power On” Indicator lights when powered up.C. Turn the Monitor On by holding its ON/OFF Button down for several seconds. Its “Power On” Indicator will light up (green on battery power, red when charging) and the Mobi logo will appear on the screen.D. Press ESC Button to go to the Main Menu. NOTE: While viewing the Main Menu, if no buttons are pressed, or the screen is not touched after 30 seconds, the monitor will automatically exit the Main Menu mode.E. Press ESC Button once again to go to the Camera View. Along the top and bottom of the screen, small “Per Camera” Icons (ex- plained on page 16) will appear over the view from the camera, which should be on and paired with the monitor.4 5LOCKING THE SCREEN: If you press the Lock Screen Button a LOCK icon will appear and the touch-screen function will be disabled. Pressing the Lock Screen Button again will revert it back to normal touch-screen function.TO SET TO ANOTHER LANGUAGE: The monitor is set to English by default. The MobiCam® DXR Touch can also display in French, German, Portuguese, Spanish, or Italian. To change the language follow this sequence: press the ESC Button touch Setting icon touch System Setting touch slider to See More List select Language from the list select a new Language press the ESC ButtonMain MenuCamera View PAIRING: The monitor and camera are paired (wirelessly linked) by the manufacturer at the fac-tory. If you ever need to relink the camera, or you want to pair Additional Cameras (sold separately) you need to pair each following this sequence: NOTE: Before pairing be sure the camera and monitor are both turned on and both are within 10 feet of each other.1. Power On the Monitor and Camera2. Press and hold the Pair Button on the back of the Monitor until the Pair Screen is displayed, then release the button.3. Press and release the Pair Button on the Monitor and select a camera number (1-4) to be paired. The word “Pairing” appears below the icon of the selected camera as it waits to be paired.4. You have 10 seconds to press and hold the Pair Button on the back of the Camera to com- plete Pairing, otherwise restart from step 2 above.5. The word “OK” or “Failed” will be displayed on screen.6. Press the ESC Button or the Return icon to go back. To pair additional cameras repeat the steps above.IMPORTANT: Use ONLY a ngertip or other NON-SHARP object to select touch screen options. Using sharp objects can damage the screen and void the warranty.
select one of four Lullabys and/or...deactivate all Lullabys...adjust Lullaby Volume TOUCH NAVIGATION ... touch the ESC Button to start at Main Menu from Main Menu ... ... to These Screens ... ... to Do This ...6 7MAIN MENU ... touch the ESC Button to open the Main Menu on screen VOLUME / DISPLAY adjust• Sound Volume• Screen Contrast• Screen Brightness PLAY select / play• Recorded Video• Recorded Photo• Delete Files LULLABYS select • Camera Number• Lullaby Choice• Lullaby Volume QUAD / CHANNEL select • Quad View• Specic CAMs• Switch CAMs NIGHT LIGHT select • Camera Number• Night Light On• Night Light O VOX (Voice Activation) select • Camera Number• VOX On/O• Sound Sensitivity• Auto Record On/O RECORD select • Record Video• Take Photo• Format SD Card• SD Information• Time/Date Stamp• 6 Languages• Reset to Default• About / Version• Date/Time• Date/Time• Time Alarm• Auto Switch Time• AV Out Format• Zoom/Pan/Tilt• Screen Timeout• Touch Calibration• SD Card Update SETTINGS for the Camera• Temperature Alarm• TX Power/Volume SETTINGS for the Monitor• USB Output• Recording ScheduleTouch the appropriate icon to access all Settings and Options. touch – or + icons to adjust... Monitor Volume Screen Contrast Screen Brightnessselect a Camera...select Night Light icon for the camera you wish to control in order to... turn the Night Light ONturn the Night Light OFF(the light bulb image in the icon changes to yellow when ON and back again when OFF)VOLUME / DISPLAYLULLABYSNIGHT LIGHTIMPORTANT: Use ONLY a ngertip or other NON-SHARP object to select touch screen options. Using sharp objects can damage the screen and void the warranty. HINT: To move back one screen touch Return icon or go to camera view by pressing the ESC Button.
TOUCH NAVIGATION ... touch the ESC Button to start at Main Menufrom Main Menu ... ... to These Screens ... ... to Do This ...TOUCH NAVIGATION ... touch the ESC Button to start at Main Menufrom Main Menu ... ... to These Screens ... ... to Do This ...8 9as you view a Recorded Video le the screen will also show... Return icon (upper left) - used to exit the playback at any time Elapsed Time / Total Play Time / and Date-Time Stamp (upper right) Video Play controls (bottom center) Delete icon (bottom right) when the Delete icon is touched you see this to conrm le deletion with an OK Video goes to the camera view and you can record a video (with sound) of the scene by touching this REC icon to start recording - and press again to stop recording SD Info displays Total Size, Used Space, and Free Space on any SD card you may have in the SD card slotRECORD SD Format lets you Format / Erase an SD memory card select OK or CancelPLAY touch to select one of two options... Video or Picture select Video or Picture select a folder for the Date of the Recording (year/month/day) select a Video or Picture File to Play or ViewNOTE: All recording functions require an SD memory card with available space (max 32 Gb) to be in the SD card slot on the monitor. NOTE: While recording no other functions are available until record-ing is stopped. touch one of four functions... Photo goes to camera view and you can take a photo of the scene by touch- ing this Still Camera icon HINT: To move back one screen touch Return icon or go to camera view by pressing the ESC Button.HINT: To move back one screen touch Return icon or go to camera view by pressing the ESC Button.
TOUCH NAVIGATION ... touch the ESC Button to start at Main Menufrom Main Menu ... ... to These Screens ... ... to Do This ...TOUCH NAVIGATION ... touch the ESC Button to start at Main Menufrom Main Menu ... ... to These Screens ... ... to Do This ... Monitor Setting on the Setting Screen, simply touch the System Setting icon (at the top) to access monitor functions... From the Monitor Setting list... select Date/Time touch any value, then touch the arrows to adjust value up or downpress OK to save changes From the Monitor Setting list... touch Time Alarm touch any value, then touch the arrows to adjust value up or downtouch Alarm On or Alarm Otouch OK to set 10 11NOTE: In Auto Scan mode (indicated by this symbol) you can select which cameras to include and the scan time between each camera. (Refer to Auto Switch Time on page 11.)NOTE: All cameras must be Paired to the monitor for view-ing access. (Refer to Pairing on page 5.)NOTE: In Quad mode, touching any active camera image changes to that full screen single camera view. Also sound only from the last came-ra in full screen mode can be monitored.QUAD / CHANNEL SETTINGSVOXSound Activated MonitoringFrom the Monitor Setting list... touch Auto Switch Time select a camera switching interval(5 sec to 60 sec)check the cameras to be included in auto switching mode touch OK to set choose from these options... Single Camera Viewselect a Camera icon (1-4, which will be shown in color and active if paired)to be your constant channel if choosing Single Camera ViewQuad Viewselect the Quad icon and see all currently paired cameras (up to 4) simutaniouslyAuto Scan Viewselect the Auto Scan icon to go to a full view from each paired camera (up to 4) as they change from one to the nextSound Activated Mode (VOX)select a paired Camera icon (the ones in color) select from 3 options... VOX (set to On or O) Sound Sensitivity (set to High, Med or Low) Sound-Activated Recording (set to Yes or No)NOTE: VOX keeps monitor (picture and sound) o until the camera detects a sound, which automatic-ally turns the monitor back on. This helps prevent false alarms and allows parents more rest. HINT: To move back one screen touch the Return icon... or go to camera view by pressing the ESC Button.HINT: To move back one screen touch Return icon or go to camera view by pressing the ESC Button.HINT: To move back one screen touch Return icon or go to camera view by pressing the ESC Button.
TOUCH NAVIGATION ... touch the ESC Button to start at Main Menufrom Main Menu ... ... to These Screens ... ... to Do This ...LanguageLanguageTOUCH NAVIGATION ... touch the ESC Button to start at Main Menufrom Main Menu ... ... to These Screens ... ... to Do This ...Zoom/ Pan /TiltZoom/ Pan /Tilt12 13SETTINGS (cont.) SETTINGS (cont.)From the Monitor Setting list... select TV Out Format choose either PAL or NTSC videoformat (US standard is NTSC)touch OK to set From the Monitor Setting list...touch Video O Timeout touch the timer icon to choosebetween non-active (X) or active(no X) Timeout Modeif active, touch the – or + icons to setthe limit at which time the video willautomatically Timeout (turn o)From the Monitor Setting list...select Touch Calibration touch the + icons as they appear ineach corner of the screen (this cali-brates the monitor for best touch screen accuracy)once all four corners are touched, tap EXIT to return to the Monitor Setting listFrom the Monitor Setting list...touch USB Output select the Top icon for Charging the monitor via the AC Adapter (included)select the Middle icon to use the sys-tem as a USB Webcam on a PC* via the USB Data Cable (included) or...select the bottom icon for PC le transfer mode to or from an SD Card in the monitor via the included USB Data Cabletouch OK to setFrom the Monitor Setting list... select Zoom/Pan/Tilt and go to thecamera scene with Zoom/Pan/Tilt icons overlaying the image...to Zoom-In touch the + icon (maximum of 3.0-to-1 enlargement) to Zoom-Out touch the – iconto Pan or Tilt touch the arrow icons(you can Pan or Tilt only after you have zoomed in)NOTE: Press the ESC Button to return to the video image without Zoom/Pan/Tilt icons overlaying it.Monitor Setting (cont.) Monitor Setting (cont.)From the Monitor Setting list...select Recording Scheduletouch any value and then touch the upand down arrows to adjust timeto activate press On(or OFF to deactivate)*See page 17 for details on using the USB Output for viewing video or transferring video or photo les to a PC.HINT: To move back one screen touch Return icon or go to camera view by pressing the ESC Button.HINT: To move back one screen touch Return icon or go to camera view by pressing the ESC Button.
TOUCH NAVIGATION ... touch the ESC Button to start at Main Menufrom Main Menu ... ... to These Screens ... ... to Do This ...LanguageLanguageLanguageLanguageLanguageLanguage14 15TOUCH NAVIGATION ... touch the ESC Button to start at Main Menufrom Main Menu ... ... to These Screens ... ... to Do This ...From the Monitor Setting list...touch Language touch one of the 6 specic Languages you want the monitor to show in all text displaysFrom the Monitor Setting list...touch Factory Default choose OK to reset all settings, or Cancel if you change your mind From the Monitor Setting list...touch About & Version here you will see the product name and manufacturer, and the latest version of the installed rmwareFrom the Camera Setting screen...touch Temperature/Alarm set ºF or ºC (default is ºF) touch the thermometer icon set the maximum and minimum alarm temperature range set the Alarm to be On or O if On, set the Alarm Time (from 5 to 60 seconds)NOTE: When the room temperature (where the camera is) goes above or below the temperature range you set, the monitor will sound an alarm and the small Temperature icon on the monitor screen will ash showing the out-of-range temperature in that room. The ESC Button will temp-orarily silence the repeating alarm until the temperature returns to the set range, or you turn the Alarm O from this screen.From the Camera Setting list... touch Tx Power/Volume adjust the Camera Speaker Volume (top icon) up or down for the Two-Way Talk function set the Transmit Range Power (lower icon) on High or LowMonitor Setting (cont.)EnglishEnglishFrenchFrenchGermanGermanPortuguesePortugueseSpanishSpanishItalianItalianLanguageLanguageLanguageLanguageFrom the Monitor Setting list... NOTE: Though shown here for refer-ence, this function to be used ONLY for Updating System Firmware, to be downloaded and put onto an SD card, in order to be installed using this option. Specic instructions will be provided to registered users regarding any new rmware. SETTINGS (cont.) SETTINGS (cont.) Camera Settings on the Setting Screen, simply touchthe Camera icon (on the bottom line) for the one you wish to control the settings for... NOTE: Only Paired camera icons will show in color and be active for touch control.HINT: To move back one screen touch Return icon or go to camera view by pressing the ESC Button.HINT: To move back one screen touch Return icon or go to camera view by pressing the ESC Button.
16 17INDIVIDUAL CAMERA and CONVENIENCE ICONS Specic small icons are created for each paired camera at the top edge of the screen which relate to that individual camera (except Battery Level, which is for the monitor only). To use them... just observe or touch one of the following Individual Camera icons to either... A... view current Camera Number, or change to the next camera you want to viewB... view current VOX level, or change VOX sound sensitivity level for that camera C... view Lullaby status, change the Lullaby selection, or turn o Lullabys from that camera D... add Zoom/Pan/ Tilt controls over the scene to manipulate the image from that camera NOTE: Other individual camera icons appear for informational purposes, such as Room Temperature, Switching Mode and Signal Strength, and when in Quad Mode, each camera screen shown will also display the Signal Strength of that particular camera. Each paired camera scene also displays Convenience Icons (shown along the bottom of the screen) so you can either view the current Date/Time Stamp or... touch and bypass the Main Menu to... 1... instantly adjust Volume controls for that camera2... instantly access the Play Video/View Photo control panel3... instantly Record Video from that camera...with just one touch!Battery Level(monitor)RoomTemperatureSwitchingMode (On)SignalStrengthdirect toRECORDdirect toPLAYdirect toVOLUMEDATE/TIME STAMPYear/Month/DayHour/Minute/SecondCameraNumberAVOXLevelBLullabyStatusCZoom /Pan/TiltD1 2 3WEBCAM USEDATA/FILE TRANSFERSTo view a larger version of the monitor screen on your PC* screen... Note: Using this feature allows viewing only on the computer. Once USB Connection is established the monitor screen is turned o and all features and buttons (with the exception of the ESC Button) will not be functional.1. set the USB Output on the monitor to the Webcam icon (refer to page 13)2. using the USB Cord (included), connect the monitor to an available USB port on your PC*3. wait for your computer to automatically recognize and install the appropriate drivers and you receive a Successful Installation message.4. once you have installed the device driver, your MobiCam® DXR Touch can be utilized as a wireless webcam. 5. once the picture from the monitor is displayed on your computer screen, pressing the ESC Button on the monitor toggles between Single and Quad View modes. The DXR Touch can be used in conjunction with Skype®, Windows Messenger®, Google Talk® and Yahoo Messenger®. When utilizing Skype®, Windows Messenger®, Google Talk® or Yahoo Messenger®, please refer to their documentation for techical support. * The MobiCam® DXR Touch is only compatable with Windows® PCs. To transfer photo and video les from the monitor to your PC* ... Note: Using this feature allows viewing only on the computer. Once USB Connection is established the monitor screen is turned o and all features and buttons (with the exception of the ESC Button) will not be functional.1. set the USB Output on the monitor to the USB Connection icon (refer to page 13)2. using the USB Cord (included), connect the monitor to an available USB port on your PC*3. wait for your computer to automatically recognize and show the outside Memory Device.4. you may then move or copy les from the SD Card (not included) as you normally would with any such storage device (provided one is in the monitor and has data stored on it) * The MobiCam® DXR Touch is only compatable with Windows® PCs. IMPORTANT: Use ONLY a ngertip or other NON-SHARP object to select touch screen options. Using sharp objects can damage the screen and void the warranty.
18 19FACTORY DEFAULT SETTINGS Item Default value RangeMonitor setting valueVolume 5 0-9Contrast 5 0-9Brightness 5 0-9Date & Time 2011/09/01,08:00Alarm Time Off, 09:00 On , OffDate Time Stamp Off On , OffAuto Switch time 5s 5s,10s,30s,1minRecording schedule Off On , OffStart Time : 12:00:00Final Time: 12:11:00Zoom 1.0 1.0 to 3.0TV out format PAL PAL,NTSCMonitor Video Off Timeout Off, 60s From 5s to 180sCamera setting valueVOX setting Off High, Middle, Low, OffLullaby Off Off, Lull 1, Lull 2, Lull 3, Lull 4Temperature setting ºF ºF - ºCMin 59ºF - Max 86ºF 50ºF - 122ºFAlarm Off On/Off, 5s,10s,30s,1m (increments)Volume 5 0-9TX Power High High, LowNight Light Off Off, OnAUDIO/VIDEO OUTYou can hear and see audio/video output on a TV or other AV device directly from your DXR Touch monitor. Simply connect the AV OUT Cord (included) to the AV OUT jack on the right side of the monitor and connect the other ends (three RCA connectors) to the Audio and Video Input jacks on your TV, DVR, or Camcorder, and select the appropriate input setting on that AV device. The monitor screen will automatically turn o, signaling the unit is connected. Please refer to your AV device manual for proper input selection and operation.TROUBLESHOOTING Problem SolutionMonitor will not turn on • Check AC/DC connection • Conrm power outlet is working properly • Charge Battery PackMonitor on but no picture • Conrm “Audio Only” mode is not selected • Conrm “VOX” mode is OFF • Conrm there are no obstructions in front of camera • Conrm camera and monitor are paired properly Camera will not turn on • Check AC/DC connection • Conrm power outlet is working properly Battery does not recharge • Check AC/DC connection. • Check battery pack connection in the monitor. • Conrm power outlet is working properly • Conrm batteries are placed correctly in monitor Connection is lost • Conrm monitor and camera are ON. • Conrm AC/DC adapter is connected properly • Conrm battery has suciant power. • Place camera and monitor near each other and press camera Pair button to relink camera and monitor. • Reduce distance between camera and monitor. • Remove or avoid other wireless products that may be near camera or monitor.
20 21PRODUCT SAFETY This product is not intended to be used as a medical monitor and its use should not replace adult supervision. CAUTION• Periodically examine this product for damage to the cord, housing or other parts that may result in the risk of re, electric shock or serious injury. Do not operate any product with a damaged cord or plug. If the product malfunctions, or is damaged in any manner, please contact the manufacturer for examination and repair to avoid a potentially serious hazard.• Never use the camera, monitor, or AC adapters near water (i.e. bathtub, sink, etc.).• Always use the camera and the monitor where there is adequate ventilation. To prevent overheating keep the camera and the monitor away from heat sources such as radiators, heat registers, stoves, or other appliances that produce heat.• Use only a dry cotton cloth to keep the units free of dust. Do not use a damp cloth, water, or liquid cleaner of any kind.• Remove the battery from either unit during long periods of non-use, as batteries may leak.• Unplug the AC adapters from the monitor and the camera during periods of non-use. To disconnect from the electrical outlet, grip the transformer and pull from the power socket. Never remove by pulling the cord.• Only use the Monitoring System with the supplied power adapters. WARNING This product is not a toy. Keep out of reach of children. To prevent strangulation never place a power cord within reach of a child.LIMITED WARRANTY Notes:Mobi Technologies, Inc. warrants this product to be free from defects in material and workman-ship for a period of ninety (90) days from the date of purchase. Should this product prove to be defective at any time during the warranty period, Mobi Technologies, Inc. will, at its option, either replace or repair it without charge. After the warranty period, a service charge will be applied for replacement of parts or labor for repair. If you suspect that the product is malfunctioning or is defective, please call Mobi toll free at 1. 877. 662.4462 and ask for the Service Department. If the problem still persists after consulting with our Service Department, you may return the product to obtain warranty service. Please return it to Mobi along with a dated sales receipt from the place of purchase to verify that it is within the authorized warranty period. This warranty does not cover damage caused by accident, misuse, abuse, improper maintenance, unauthorized modication, or connection to an improper power supply. A fee may be charged for repair resulting from such damage. This warranty excludes all incidental or consequential damages and any liability other than what is stated above. PROPER DISPOSALIf you eventually dispose of the DXR Touch Monitor, Camera, Batteries, or AC Adapters, do so in accordance with current federal, state and local regulations. As a consumer, you may be obligated by law to recycle used batteries. Do not mix products bearing the WEEE symbol (crossed out trash bin icon) with your general household waste. For the correct collection and treatment of these products take them to the collection points designated by your local authority. Alternatively, contact the supplier that sold you the product.BATTERY REPLACEMENT Monitor Battery (included)Li-Ion 3,7V 1200 mAhCamera Battery (not included, sold separately, Mobi part # 70216) Li-Ion 3,7V 1500 mAh
Mobi Technologies, Inc.5913 Blackwelder StCulver City CA 90232Toll Free 877.662.4462Be sure to register this product on the Mobi websiteto receive rmware updates.www.getmobi.comMobi, MobiCam, and DXR Touchare registered trademarks of Mobi Technologies, Inc.SD is a trademark of SD Association. Skype®, Windows Messenger®, Google Talk® and Yahoo Messenger® are trademarks of their respective companies.© 2013 Mobi Technologies, Inc. All Rights Reserved

Navigation menu