MobiFren GBH-S100PLUS Bluetooth Headset User Manual

GT Telecom Co., Ltd. Bluetooth Headset Users Manual

User manual

User Manual(English)GBH-S100MobiFren GBH-S100plusUser Manual---------------------------------------------------------------------------------------------------------Hand-strap or necklace styleThank you for choosing MobiFren GBH-S100.It is high quality stereo Bluetooth headset,designed to provide you convenient and easyway of using your mobile phone.This instruction manual will get you started!---------------------------------------------------------------------------------------------------------MobiFren GBH-S100 User ManualContentsComponentsSafety Instruction1 About your MobiFren GBH-S1002Features3 Specifications4 Getting started with your MobiFren- Charging your MobiFren- Pairing your MobiFren with mobile phone- Turning your headset on and off- Using your MobiFren headset
Call, MP3, Ultra Power save mode, Multi connection, etc.5WhatdoesLEDcolormean?6Troubleshooting&FAQ7 Handle MobiFren with care8 Certification and safety approvals9 Glossary10Warranty---------------------------------------------------------------------------------------------------------Fig.1 Lock / Unlock positionBar TypeFold TypeFig.2USB charging adapterUSB type AC/DC AdapterConnecting PC USB---------------------------------------------------------------------------------------------------------Fig.3Example of PairingAfter activating Bluetooth mode in your mobile,then, searching GBH-S100.Pairing may be different from mobile models.Please refer to your mobile phone's manual.ComponentsGBH-S100Sub-ReceiverUSBTypeAD/DCAdapterUSB Charger
(S)(L) Ear padPouchUser Manual* The drawings and examples in manual are for better understanding to thisproduct, so, it may be different from the real good.Components and design can be changed without prior notice.Safety InstructionRoad safety at all timesUsing your mobile phone while driving can distract you and increase thechance of an accident.Do not use mobile phones while driving :Always drive safely and follow locallaws.---------------------------------------------------------------------------------------------------------1. 1. About your MobiFren GBH-S100(1) LED Light- Blue indicates operating mode (connected, active or standby)- Red indicates battery condition (low level or charging status)(2) JOG Button•MP3Mode▹II : Play / Pause/ Stop>>: Next song / FF<<: Previous song /RW+:VolumeUp-: Volume Down•Talkmode+: Volume Up-: Volume Down(3) Charging socket
(4) Multi Function Button(MFB)- Press to turn the headset on : Give MFB long press at fold type.(Blue flash burst indicates success)- Press and hold to turn headset off : Give MFB long press at fold type.(Red flash burst indicates success )- Press to answer or end a call2. Features•AutoCallLock™• Smart Connection™• Multi connection•Ultrapowersavemode• Answering a call• Ending a call• Rejecting a call• Voice dialing• Last number redialing• Waiting a call• Put calls on hold•LossPrevention•ConverttoCall•Playmusic• Select previous song / next song• Next song FF / Previous song RW• Volume Control* Functions of this product depend on your mobile phone’s features.Check your mobile’s user manual for further information.
Twist to the counterclockwise when you open the Cover---------------------------------------------------------------------------------------------------------3. Specification•Playtime:about5hours• Talk time : about 5 hours• Standby time : about 300 hours•Ultrapowersavemode:upto6months• Battery for charging with PC USB• Battery charging time : 2hours 30minutes.• Size : 68.8 x 22 x 11.1mm•Weight:13g• Operating range : within 10M• Support profiles : Headset Profile, Handsfree Profile,A2DP Profile, AVRCP Profile• Bluetooth specification: Version 2.1 + EDR (Please refer to glossary, page 12 )4. Getting started with your MobiFrenMobiFren GBH-S100 is very easy to use.-ChargingyourMobiFren:Make sure that your MobiFren GBH-S100 is fully charged before you use it.Charge with Mini-USB charger or AC/DC adapter, supplied together with GBH-S100.* The LED shows‘RED’during charging and will turn‘BLUE’when fully charged.While using USB hub, charging may not be good due to low current.- Pairing your MobiFren with mobile phone :Before you use your Mobifren GBH-S100, you need to pair it with your mobile phone.1. Set pairing mode in GBH-S100<Pairing on first purchasing>On first purchasing, if you turn on the power, the headset is ready to be “Pairing mode” automatically.Press MFB button at fold type forabout 4 seconds. The LED is continuously on.
* If you do not pair to mobile phone within 3 minutes, the headsetwill be out of pairing mode.<Pairing to other device & pair again>After turning off the headset, press and hold MFB button for about8 seconds at fold type, until the blue light on LED is continuously displayed.* If you do not pair to mobile phone within 3 minutes, the headsetwill be out of pairing mode.2. Now, please prepare “Pairing mode” in your mobile phone. (Please refer toFig3.)①② Turn Bluetooth on your mobile phone and search for Bluetoothdevices according to its User Manual instructions. This usuallyinvolves going to ‘setup’ menu, ‘connect’ or ‘Bluetooth’ menu onyour phone and select to ‘find’ or ‘add’ a new Bluetooth device.( Please refer to your “ Mobile manual” )---------------------------------------------------------------------------------------------------------③ Select theheadset ( it will appear as “MobiFren GBH-S100” )from the searched devices.④ Enter passkey( PIN ) 0000 to pair the headset with your mobile phone.* Some mobile phones do not need to enter pin code.⑤ When you enter pin code, blue light of the headset glitters 5 times,and, the mobile phone shows that the headset is paired with mobilephone.⑥ Your MobiFren is now ready to use. ( Blue light glitters every 3 second. )* Depending on mobile phone, the pairing procedure may be different.( Please refer to your mobile’s user manual for further information)- Turning your headset on and off :• To turn on your headset, press and hold the MFB until ‘Blue’blinks on LED.On first purchasing, the headset enters pairing mode automatically whenthe power is on.• To turn off your headset, press and hold the MFB until ‘Red’ blinkson LED.
-Using your MobiFren Headset :1. Auto Call Lock™- To prevent unintentional call, multi-function button and JOG button becomes lock status in case of bar type.2. Smart Connection™When there’s incoming call, if you fold the headset, then it connects to call automatically.* If there is “Connection Request” from mobile phone during Smart Connection, please refer to ”Trust Device set up” in your mobile’s usermanual.3. Multi Connection- Connecting to mobile phone and other device ( mobile phone / MP3 Player / Laptop computer etc ) for call and music at the same time.- Connecting to MP3 Play enabled mobile phone for call and music at the same time.< Setting Multi Connection >*After you pair the headset with mobile phone, then, set up Multi Connection.- Press MFB button for 8 seconds at fold type after power off, then, pair and search GBH-S100 and connect with another devices ( Mobilephone / MP3 player/ laptop computer, etc). In this case, the headset connects to other devices with the profile of A2DP/AVRCP.- Call connects with mobile phone and music play connects with audio device. So, while listening music with MP3, if there is an incoming call,MP3 stops temporarily, it connect to phone call automatically.(The devices should be Bluetooth enabled, and it may be different, depending on devices)< Multi Connection Conversion >In case of connecting with 2 devices, if you give a multi function button long press and push ▷Ⅱ button to‘<<’or‘>>’direction in JOG at thesame time,you can convert profiles between devices easily which were connected recently.The blue LED blinks and the headset connects with another device.*Ex.)While using the headset with Bluetooth device A, if you press MFB button and‘<<’or‘>>’ button simultaneously, then the headset convertsto Bluetooth device B ( Handsfree profile). So you can use with Bluetooth device B.*You can pair the Bluetooth enabled devices up to 8 devices.And, after that, it’s ok only to connect to use it. Multi connection can beconverted between 2 devices which recently used. For more detailed information, please visit toHYPERLINK "http://www.mobifren.com"4. Ultra power save mode(Ultra power save mode is off status on first purchasing)* At Ultra power save mode, the maximum standby time is 6 months.
- Setting : At fold type, press MFB button and push ▷II button toward (-) directioninJOGatthesametimetillpurplelightglitters.- Releasing : At fold type, press MFB button and push ▷II button toward (+) direction in JOG at the same time, till purple light glitters.❖CautionIn Ultra power save modei. When changed to bar type, headset is disconnected from mobile phone after5secondsii. When changed to fold type, headset is connected to mobile phone automaticallyiii. Reconnection time depends on the mobile phone- To prevent malfunction, MFB becomes “Key Lock” status for 5 seconds,after changed to fold type- The above can be different from phone models. Some models need to change their configuration (for example, trusted device setting) to useUltra power save mode.Refer to your mobile phone user manual for further information.5. Answering a call- When receiving a call, you can answer the call by folding from the bar type.(Smart Connection™)- If the headset is already folded, press the MFB on your headset to answer call.6. Ending a call- Press the MFB shortly to end a call-Orunfoldyourheadset:thiswillautomatically end your call after 5 seconds7. Making a call- After you press the call number in mobile, press MFB button.---------------------------------------------------------------------------------------------------------- If you press “Send” button in mobile, some mobile will be connected to headset automatically, depending on models.8. Rejecting a call- To reject an incoming call, give the MFB button a long press till the phone bell stops.- Depending on your phone settings, the person who calls you may be forwarded toyour voice-mail service or sent a busy signal.9. Voice Dialing- Give the MFB a long press. For best results, record the voice-dialing through your Headset.It depends on your mobile supports.Please review your phone’s user manual for more information about using this feature.
10. Redialing last number- Press the MFB shortly, then the last number will be shown in your mobile.Then, press the MFB one more time. ( It may be different from mobile phone models.)11. Adjusting Volume- With (+) / (-) button in JOG button, you can control the volume of receiving voice and music.12. Shut off transmitting sound- While talking, if you ▷II push button toward (+) or (-) direction button for about 1 second, the transmitting sounds will be blocked.- While transmitting sound is blocked, it will be released if you push ▷II button toward(+) or (-) direction button for about 1 second.13. Waiting a call and put a call on hold- This feature allows you to put a call on hold during conversation and answer a waiting call.- Give the MFB a Long Press (press approximately 1 second) to put an active call on hold and answer a waiting call.- Give the MFB a Long Press to switch between two calls.- Just press MFB shortly to end a call.14. Call : Adjustment for transmitting sound level- On purchasing, the transmitting sound level is set in the middle from the 5 levels.- Can be adjusted by user’s mobile phone. Don’t adjust too high or too low,not to cause sound quality poor.- How to adjust At fold type, if you push ▷II button toward (+) direction about 8 seconds, it increases one step higher, and if do it again, itincreases another one step. At fold type, if you push ▷II button toward (-) direction about 8 seconds, it decreases one step lower, and if do itagain, it decreases another one step.---------------------------------------------------------------------------------------------------------* LED Status on controlling transmitting sound levelTwo levels up Blue LED blinks two timesOne level up Blue LED blinks one timeFirst setting Purple LED blinks two timesOne level down Red LED blinks one timeTwo levelsdownRed LED blinks two times
15.Play MP3* To enjoy the best audio quality, please set 70 ~ 80 % from the max volume inyour device.- On first purchasing, the volume level was set in the middle(6 level)of all 12 levels. (Please adjust volume by (+)/(-) direction button in JOG.)- Button details for MP3 Play▷II : Play / Pause▷II (long press) : Stop+: Volume Up-: Volume down>>(short press): Next song>>(short press) : FF<<(long press): Previous song<<(long press): RW16. Headset Initializationpush ▷II button toward Vol ( + ) ▶ Vol ( - ) ▶ Vol( + ) ▶ Vol( - ) shortly in order at fold type, then, press MFB button till LED showspurple.17. Connecting to Paired devices- When you power on the headset, it connects to the device automatically which was connected to the latest. ( Only HFP)- Though it is already paired, but is not connected, just press MFB button to connect HSP/HFP, and press >ll button for A2DP / AVRCP.5. What does LED color mean?Status LED indicationActive on a call Blinks blue light every 8 secondStandby mode Blinks blue light every 3 secondbattery Is runninglowBlinks red lightCharging Red light ONFully charged Blue light ONPairing mode Blue light ON---------------------------------------------------------------------------------------------------------
6. Troubleshooting & FAQ* I hear crackling noisesFor the best audio quality, always wear your headset on the sameside as your mobile phone.* I cannot hear anything“Increase the volume on the headset.”“Ensure that the headset is paired with the phone.”“Make sure that the phone is connected to the headset.”If the headset fails to connect either when you pressed MFB or throughyour mobile phone’s Bluetooth menu, follow the pairing procedure.*I have problems with pairing even though my phone indicates otherwise.Please delete the headset paired in your mobile and pair the headset again.Pleaserefertosetup“Pairingmode”,Page4,6,7.* Will the MobiFren GBH-S100 work with other Bluetooth equipment?The MobiFren GBH-S100 is designed to work with Bluetooth mobile,computer or portable audio devices which are built in. It can also workwith other Bluetooth devices that are compliant with Bluetooth version1.1/ 1.2/ 2.0/2.1+EDR and that support HSP, HFP, A2DP and AVRCP.---------------------------------------------------------------------------------------------------------7. Handle MobiFren with care•Always store the MobiFren GBH-S100 with the power off and protect safely when it’s not in use.• Avoid storage at extreme temperature. ( above 60 ℃/ 140℉ - including direct sunlight-or below -20 ℃/ -4℉) This can affect the MobiFren’s battery life and may be the cause of malfunction. High temperature may also degrade performance.• Do not expose the MobiFren GBH-S100 to rain or other liquids.• Prevent children or pets to bite or suck this headset.• Please do not disassemble at user’s option.•Pleasemakesuretousecertifiedcharger.(RatedVoltage:5V)---------------------------------------------------------------------------------------------------------
8. Certification and safety approvalsCertified under the provisions of Regulations on Certifications ofinformation and Communications Equipment by Director General ofRadio Research Laboratory. ( Ministry of information and Communication )FCC ID : UZCGBH-S100PLUSThis device complies with part 15 of the FCC Rules. Operation is subjectto the following twoconditions: This device may not cause harmfulinterference, and This device must accept anyinterference received,Including interference that may cause undesired operation.Made in KoreaIn accordance with the R & TTE Directive 1999 / 5 / EC of 09. March 19999. Glossary1)Bluetoothisaradiotechnologythatconnectsdevices,suchasmobilephones and headsets, without wires or cords over a short distance( approximately 30 feet ) Get more information at www.bluetooth.com2) Bluetooth profiles are the different ways in which Bluetooth devices communicate withHSP : Headset ProfileHFP : Handsfree ProfileA2DP ( Advanced Audio Distribution Profile ) : Stereo ProfileAVRCP ( Audio / Video Remote Control Profile ) : Remote Control Profile3) Pairing of devices create a unique and encrypted link between two Bluetooth devices and let them communicate with each other. Bluetoothdevices will not work if the devices are not paired.4) Passkey or PIN is a code in numbers, which you have to enter on your mobile phone to pair it with your MobiFren GBH-S100.This makes your phone and the MobiFren GBH-S100 to recognize other and automatically work together.---------------------------------------------------------------------------------------------------------
5) ‘Standby Mode’ is when the MobiFren GBH-S100 is passively waiting for a call. When you end a call on your mobile phone, the headsetgoes into standby mode.6) Multi connection is to connect to different profiles in 2 Bluetooth enableddevicesatthesametime.Theconnectionprioritygoestothemostrecently connected profile, and can be converted between the 2 devices which were recently used.It can be paired up 8 devices, so,after youpaired, just only to connect if you want to use.10. WarrantyThe conditions and our responsibilities under this warranty are as follows:• The warranty is limited to the original purchaser.• A copy of your receipt or other proof of purchase is required.• The warranty is void if the serial number, date code label or productlabel is removed, or if the product has been subject to physical abuse, improper installation, modification, or repair by unauthorized third parties.• The responsibility of MobiFren ( MobiSolution ) products shall be limited to the repair or replacement of the product at its sole discretion.• Any implied warranty on MobiFren ( MobiSolution ) products is limited to one year from the date of purchase on all parts, including any cordand connector.• Specifically exempt from any warranty are limited-life consumable components subjectto normal wear and tear, such as microphonewindscreens, ear cushions, decorative finishes, batteries, and other accessories.• MobiFren ( MobiSolution ) is not liable for any incidental or consequential damages arising from the use or misuse of any MobiFren (MobiSolution ) product.• This warranty gives you specific rights and you may have other rights which vary from area to area.• Unless otherwise instructed in the User Manual, the user may not, under any circumstances, attempt to perform service, adjustments orrepairsonthisunit,whetherinoroutofwarranty.Itmustbereturnedtothe purchase point, factory or authorized service agency for all suchwork.• MobiFren ( MobiSolution ) will not take any responsibility for any loss or damage incurred in shipping.Any repair work on MobiFren (MobiSolution ) products by unauthorized third parties voids any warranty.---------------------------------------------------------------------------------------------------------"Contribute to our communities withgood technology and good product"
---------------------------------------------------------------------------------------------------------New Concept of Stereo Bluetooth HeadsetGBH-S100plusMono & Stereo Bluetooth HeadsetCreative & Comprehensive✽High sound qualityEliminating Noise and Echo by built-in DSP chip.Optimizing the call condition, even though in driving✽Multi ConnectionPairing up to 8 devices and can use 2 devices each orsimultaneously for music and call.Only in “MobiFren”✽Ultra Power Save ModeMaximum standby time 6 months.✽Auto Call Lock™Prevent unintentional call by Call lock button.✽Smart Connection™When there’s incoming call, just slide up the MFBbutton to unlock position. Then, it connects to call.✽Features- Talk time : about 5 hours- Music play time : about 5 hours- Standby time : about 300 hours- Standby time at Ultra Power Save Mode : Up to 6 months-Weight:about13g- Size : 68.8 x 22 x 11.1mm
- Bluetooth specification : Version 2.1 + EDRMADE IN KOREAGTtelecom Co., Ltd.http://www.gttelecom.com848-16, Gupyeong-Dong, Gumi-City, Gyeongbuk, KOREATEL : 82-54-474-2220FAX : 82-54-474-2251ISO 9001 Quality Management System Certified Company
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, (example - use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu