MobiWireS MP3PLUS Connected Mobile with Printer User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4115302
Application ID	9WBqUr+WFzJi/6WNOH5RIA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	36.48kB (456011 bits)
Date Submitted	2018-12-24 00:00:00
Date Available	2018-12-28 00:00:00
Creation Date	2018-12-14 16:01:11
Producing Software	Microsoft® Word 2010
Document Lastmod	2018-12-14 16:01:11
Document Title	SC6600L 手机使用说明文档
Document Creator	Microsoft® Word 2010
Document Author:	candy.zhi

Mobile Appearance picture
Table of Contents
Foreword ...............................................3
Getting to know your touch phone ......6
Starting up the device ...........................8
Introduce the basic phone function ...10
Technical Specifications ..................... 15
SAR......................................................16
Foreword
Safety
In order to ensure the phone is used safely and
correctly, please read the precautions below
carefully before use.
1.General precaution
·Your phone is only suitable for the battery and
charger approved by our company or else it may
cause the battery to leak, overheat, explode or
even catch fire.
·Do not knock, vibrate or throw the phone heavily
to avoid malfunction, fire, overheating, explosion
or fire.
·If there is an abnormality such as temperature
rise, color change or distortion when using,
charging or storing the battery, stop using it and
replace it with a new one.
·It may burn the skin if liquid in the battery leaks
onto skin or clothes. If this happens please
flush with plenty of clean water immediately and
go to a hospital at once.
·Please keep the battery away from fire to avoid
fire and explosion if the battery leaks or emits a
strange smell.
·Do not place expose the battery to moisture or it
may cause overheating, fumes and corrosion.
·Do not use or place the battery under direct
sunlight, or in hot places, it may cause leakage
and overheating, thus reducing performance and
shortening the lifespan.
·Do not charge the battery for over 24 hours
continuously.
2.Precaution for the use of charger
·Do not cause short circuit to the charger, or it
may cause electric shock, fumes and damage to
the charger.
·Do not use the charger if the power wire is
broken, or it may cause fire and electric shock.
·Please remove accumulated dust on the power
plug.
·Do not put water containers next to the power
supply to avoid overheating, fire, electric shock
and malfunction in case they come into contact.
·Do not disassemble or tamper with the charger
or it may cause personal injury, electric shock,
fire and the damage of the charger.
·Do not use the charger in places of high humidity,
like bathrooms, or it may cause electric shock,
fire and damage of charger.
·Do not touch the charger, power cord or power
plug with wet hands or it can cause electric
shock.
·Do not put heavy objects on the power cord or
change the power cord or it may cause electric
shock and fire.
·Please unplug the power socket before cleaning
and maintenance.
·Please hold the charger to unplug the socket as
pulling the power cord may damage the power
wire and cause electric shock and fire.
3.Cleaning and maintenance
·As the phone, battery and charger are not
waterproof, do not use them in places of high
humidity and avoid them being wet by rain.
·Please clean the battery and charger with a soft
dry cloth.
·Never use alcohol, thinner or solutions, like
benzene, to wipe the phone.
·Dirty sockets can cause poor contact and power
down, and even make recharging unavailable. So,
please clean them periodically.
Getting to know your touch
phone
Starting up the device
1.Install SIM card
• Locate the SIM card slot and insert the SIM card.
When installing, make sure the chip is facing
down, paying attention to the slot orientation.
• Slide the SIM card all the way into the slot.
Note:
(1) The phone supports two SIM cards. The card
will support 2G, 3G and LTE.
(2) Keep the SIM card away from the child's
touch.
(3) Any wear or folding may easily damage the
SIM card, so be careful when inserting, removing
and storing.
(4) Before removing the SIM card, make sure that
the power has been turned off and the battery is
removed.
2.Charge the battery
• The new battery is partially charged. It is
recommended that you install and charge the
battery before you start using it. Some batteries
perform best after several full charge/discharge
cycles.
Note:
(1)The device can only be charged using the AC
adapter supplied with the device.
(2)Plug the AC adapter's cable into the phone's
charging port, then plug the AC adapter into a
power outlet to begin charging the battery.
(3)The battery is charging when the device is
turned on, and the charging icon is displayed in
the status bar of the home screen. When the
battery is fully charged, a full battery icon appears
in the title bar of the main screen.
Warning:
• When using the AC adapter to charge the
battery, do not remove the battery from the
device.
• As a safety precaution, the battery stops
charging before overheating.
3.Power on/off
• To turn off the phone, press and hold the power
button (the blue button on the right side of the
phone), the interface pops up the selection box,
select the "Shutdown" option.
To turn the power on again, press and hold the
power button.
Introduce the basic phone
function
1. Switch MainMenu style
(1) In the default home screen, slide your
fingertips left and right along the screen to display
more home screens.
(2) On the home screen, click the icon (main
menu icon) at the bottom of the screen to enter
the main menu screen, and slide your fingertips
up and down along the screen to display more
applications.
2.The main screen
(1) Read your notice
When you see a notification in the status bar,
touch the bar and swipe down on the screen to
open the list of notifications that appear in the
sliding window.
In-progress notification reports such as receiving
information, receiving transmission files, and the
like.
The notification will report the arrival of new
messages, calendar events, etc. You can clear
the list of notifications by selecting the "Clear"
icon at the bottom of the notification window.
To open a message, reminder or other
notification, you can touch the item. To turn off
notifications for a window, swipe your finger left
or right to remove notifications from the screen.
(2) Create home screen shortcuts and widgets
In the main screen, press and hold TP, then click
SHORTCUTS. Touch and hold to select a widget
to add a saved contact, a signed email user, to a
shortcut to the home screen.
10
(3) Move the object on the home screen
To move an icon or other item on the home
screen, you must touch and hold it to enter
mobile mode.
Do not lift your finger and drag the object to a
new location. To move the item to the part of the
home screen that is not in the view, move it to the
top left corner of the screen. A removal prompt
will appear, the screen view will change, the
object will be positioned and released.
3. Camera
All photos that you can capture or view on your
phone are stored on your phone.
Note: This phone does not support SD card.
11
4. GPRS/WLAN network
Your device’s networking capabilities allow you to
access the Internet or your corporate network
through WLAN, GPRS, EDGE (if available)
You can also add and set up a VPN or proxy
connection.
To use WLAN on your device, you need access
to a wireless access point
Note: The availability and range of your device’s
WLAN signal depends on the number,
infrastructure, and other objects through which
the signal passes.
To open the Browser you need to be connected
to a network.
12
5. U-disk storage
This phone supports movable storage, i.e., the
U-disk function.
When the phone is switched on, you see the icon
in the status bar on the top of the screen when it’s
connected to a PC by a data line. Touch the bar
and slide your finger down the screen to open the
list of notifications displayed in the sliding window.
Select [USB connected] and touch [Turn on USB
storage] to confirm, you can use the phone as a
U-disk.
13
6. Bluetooth
The phone supports Bluetooth (BT) function,
which can establish a wireless connection
between the mobile phone and other compatible
devices, and carry out data transmission. A
wireless connection can be established between
the mobile devices, and the longest distance can
be up to 10 meters. Bluetooth connections may
be subject to obstacles such as walls or other
electronic devices.
(1) Enter the setup menu, touch the Bluetooth
open function, the standby screen will display the
BT icon in the status bar.
(2) Open the discoverable BT, other devices can
search for the phone.
(3) Before using your phone as a Bluetooth
device, you need to pair your phone with the
target device as follows:
- Make sure your phone is Bluetooth enabled.
- Touch "Scan device". The Bluetooth device
within the range of the phone will start scanning.
- Touch the device you want to pair and confirm
your password to complete the pairing.
You can share pictures, video files with family
and friends using Bluetooth.
14
Technical Specifications
Technical Specifications
Weight: 522g(with paper and battery )
Dimensions: 183X72X66.5mm
Band:
2G bands:
GSM900MHz/DCS1800MHz/GSM850MHz/PCS1900
MHz
3Gbands:
WCDMA B1/WCDMA B2/WCDMA B5/WCDMA B8
Battery Type: Li-ion
Battery Voltage：7.4V
Battery Capacity: 2600mAH
Talk Time: about 15h
Standby Time: about 600h
Note: Actual operating conditions depend on the
local network environment, SIM, and user
behavior.
Warning: Any consequence caused by misuse,
abuse, or not following any and all of the
above-written suggestions and instructions shall
not hold the producer in any way responsible to
any degree.
Announcement: The manufacturer reserves the
right to change or upgrade specifications or
software versions without prior or separate notice.
Trade marks mentioned or used in this material
belong to their respective owners.
15
SAR
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1)This device may not cause harmful
interference.
(2)This device must accept any interference
received, including interference that may cause
undesired operation.
FCC ID: QPN-MP3PLUS
Any changes or modifications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable
protection
against
harmful
interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the
equipment and receiver.
---Connect the equipment into an outlet on a
16
circuit different from that to which the receiver is
connected.
---Consult the dealer or an experienced radio/TV
technician for help.
Body-worn Operation
This device was tested for typical body-worn
operations. To comply With RF exposure
requirements, a minimum separation distance of
1.0cm must be maintained between the user’s
body and the handset, including the antenna.
Third-party belt-clips, holsters, and similar
including the antenna. Third-party belt-clips,
holsters, and similar accessories used by this
device should not contain any metallic
components. Body-worn accessories that do not
meet these requirements may not comply with
RF exposure requirements and should be
avoided.
Specific Absorption Rate (SAR) information:
This wireless phone meets the government's
requirements for exposure to radio waves. The
guidelines are based on standards that were
developed
by
independent
scientific
organizations through periodic and thorough
evaluation of scientific studies. The standards
include a substantial safety margin designed to
assure the safety of all persons regardless of age
or health.
FCC RF Exposure Information and Statement
The SAR limit of USA (FCC) is 1.6 W/kg
averaged over one gram of tissue. Device types
MP3 Plus has also been tested against this SAR
limit. The highest SAR value reported under this
standard during product certification for worn on
the body is 1.013W/kg. This device was tested for
typical body-worn operations with the back of the
17
handset kept 1cm from the body. To maintain
compliance with FCC RF exposure requirements,
use accessories that maintain a 1cm separation
distance between the user's body and the back of
the handset. The use of belt clips, holsters and
similar accessories should not contain metallic
components in its assembly. The use of
accessories that do not satisfy these
requirements may not comply with FCC RF
exposure requirements, and should be avoided.
18
CAUTION：
Use careful with the earphone maybe excessive
sound pressure from earphones and headphones
can cause hearing loss.
2.This device battery is not removable, please do
not disassemble the device.
3. Adapter shall be installed near the equipment
and shall be easily accessible.(Adapter model:
S048CM0900500)
4. Charger1: A88-3771-5V2A
Charger2: A70-502000
Charger3: A824-5V2A
5.The device complies with RF specifications
when the device used at 5mm from your body.
6. USB cable are shielded.
19

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 19
Language                        : zh-CN
Tagged PDF                      : Yes
Title                           : SC6600L 手机使用说明文档
Author                          : candy.zhi
Creator                         : Microsoft® Word 2010
Create Date                     : 2018:12:14 16:01:11+08:00
Modify Date                     : 2018:12:14 16:01:11+08:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools