Mobile Action Technology MA730R1 Bluetooth Data Suite User Manual 82 000 300500v002 3 indd

Mobile Action Technology Inc. Bluetooth Data Suite 82 000 300500v002 3 indd

Users Manual

- 1 -- 2 - - 3 -For quick and easy installation, it is strongly recommended that you install the software on the supplied CD before connecting the Bluetooth Dongle. For more details on other operations, please refer to the electronic manual on the CD. INSTALLATION1. Insert USB Bluetooth Dongle Software CD Please insert the supplied CD-ROM. The autorun screen will appear. Click “Install Dongle Utility” to install the USB Bluetooth Dongle software. 2. Welcome ScreenClick “Next” to continue.3. License AgreementRead the “License Agreement” carefully, click “Yes”.4. Choose Destination LocationClick “Next” to continue; or click “Browse” and select another folder to install the software.5. Installation completeSelect “Yes, I want to restart my computer now”, then click “Finish”.INITIAL SETUP PROPERTIES CONFIGURATIONClick “My Bluetooth” •“Device Properties”. General In “Device Name” eld, enter a unique device name which will be shown on other bluetooth enabled devices. In “Device Type” eld, select the device’s type of your local computer. Device Address: The address of the local address. BLUETOOTH USB DONGLE Quick GuideINITIAL SETUPAfter installing the software successfully, please plug the USB Bluetooth Dongle into an available USB port.1. Open BlueSoleilDouble-click the “BlueSoleil” icon on the desktop.2. BlueSoleil EnvironmentThe BlueSoleil window will appear. BlueSoleil contains the following six menus: File Menu View Menu My Bluetooth Menu My Services Menu Tools Menu Help Menu This device complies with Part 15 of the FCC rules. Operation issubject to the following two conditions: 1) this device may not causeharmful interference, and 2) this device must accept any interferencereceived, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC rules. These limitsare designed to provide reasonable protection against harmful interferencein a residential installation. This equipment generates, uses and canradiate radio frequency energy and if not installed and used in accordancewith the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try correct theinterference by one or more of the following measures:- Reorient the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.Any special accessories needed for compliance must be specified in theinstruction manual.You are cautioned that changes or modifications not expressly approved bythe party responsible for compliance could void your authority to operatethis device.The antenna(s) used for this transmitter must not be co-located or operating inconjunction with any other antenna or transmitter.Federal Communications Commission (FCC) StatementRADIO FREQUENCY INTERFERENCE STATEMENT
- 5 - - 6 - - 7 -- 4 - AccessibilityYou may permit or prohibit other Bluetooth enabled devices to interact with your computer. - Connectable: Permit.- Non-connectable: Prohibit. HardwareView information about your Bluetooth hardware.Click “Tools” “My Bluetooth Device”.In the “Bluetooth Device” tab, select the type of Bluetooth enabled device that you want to use. The default setting is “USB”. Other device type may not be supported by the bundled software. Supported Outlook versionOperating System VersionWindows 98SE/ME MS Outlook 2002 (XP)Windows 2000/XP MS Outlook 2000, Outlook 2002 (XP), Outlook 2003 AV HeadphoneClick on the “AV Headphone” tab, and enable the check box next to “Auto-start this service when My Bluetooth starts”.Then, select the proper item for the “Playback device” in the local computer.Click “My Services” “Properties”. Information SynchronizationClick on the “Information Synchronization” tab, and enable the check box next to “Auto-start this service when My Bluetooth starts”.Select the type of PIM (Personal Information Management) objects that you would like to synchronize.MY BLUETOOTH DEVICESERVICE PROPERTIES82-000-300500v002

Navigation menu