Mobile Technologies 153-0761-00 Enterprise Tablet pro, Enterprise Tablet Lite User Manual
Merchandising Technologies Inc. Enterprise Tablet pro, Enterprise Tablet Lite
User manual
ENTERPRISE TABLET INSTALLATION GUIDE
1
MTI P/N 063-1407-00 rev C ©2013 MTI All Rights Reserved
MTI 1050 NW 229th Avenue Hillsboro, OR 97124 T:800.426.6844 www.mobiletechinc.com
OVERVIEW
Materials in Box:
4 VHB Strips
(Preinstalled)
Base Plate Removal
Mounting Plate
Enterprise Tablet Pro Base
Power Supply
Alcohol Wipes
(x10)
Screws
(x4)
Hex Wrench
Authorization Card
Access Card (x5)
NOTE: The unit will slide to the right as the
Security Wrench is turned.
INSTALLATION GUIDE ENTERPRISE TABLET INSTALLATION GUIDE
1 2 3
Configuration A: Top Mounted
1
3
2
4
Configuration B: Wall Mounted
2
MTI P/N 063-1407-00 rev C ©2013 MTI All Rights Reserved
MTI 1050 NW 229th Avenue Hillsboro, OR 97124 T:800.426.6844 www.mobiletechinc.com
NOTE: The unit will slide
to the left as the Security
Wrench is turned.
Enterprise Tablet LiteEnterprise Tablet Pro
1
3
Case Docked Case Ready For Removal
Case Removed Detecting Card
2
4
Remove Case from Base
LED Indicators
CASE REMOVAL AND LED GUIDE ENTERPRISE TABLET INSTALLATION GUIDE
3
MTI P/N 063-1407-00 rev C ©2013 MTI All Rights Reserved
MTI 1050 NW 229th Avenue Hillsboro, OR 97124 T:800.426.6844 www.mobiletechinc.com
ENTERPRISE TABLET INSTALLATION GUIDE
1 2
43
ACCESS CARD REGISTRATION
4
MTI P/N 063-1407-00 rev C ©2013 MTI All Rights Reserved
MTI 1050 NW 229th Avenue Hillsboro, OR 97124 T:800.426.6844 www.mobiletechinc.com
Authorization
Card
Access Card
If no Access Card is detected, the Base will return to normal condition
waiting for registered Access Card to unlock the Base.
The Base can register a maximum of 5 Access cards. The process will
need to be repeated for each card. If a sixth card is registered, the
first registered card will be deregistered.
IF AUTHORIZATION CARD IS LOST OR STOLEN,
CONTACT CUSTOMER SERVICE FOR REPLACEMENT.
If the case is removed:
If the case is docked:
ENTERPRISE TABLET INSTALLATION GUIDE
1
5
2
6
43
5
MTI P/N 063-1407-00 rev C ©2013 MTI All Rights Reserved
MTI 1050 NW 229th Avenue Hillsboro, OR 97124 T:800.426.6844 www.mobiletechinc.com
ACCESS CARD REGISTRATION
The base can register a maximum of 5 Access cards.
Example:
NOTE: The above grid is a conceptual visual representation of
the Electronic Register.
Example:
Example:
If a card is lost or stolen:
Then re-register the remaining cards plus the new one
ordered through Customer Service.
If a sixth card is registered, the first registered card will be
deregistered.
Example:
Example:
Take any of the remaining access cards and register it 5
consecutive times:
ACCESS005
ACCESS004
ACCESS003
ACCESS002
ACCESS001
ACCESS005
ACCESS004
ACCESS003
ACCESS002
ACCESS001
ACCESS006
ACCESS005
ACCESS004
ACCESS002
ACCESS001
ACCESS006
ACCESS005
ACCESS004
ACCESS003
ACCESS002
ACCESS001
ACCESS001
ACCESS001
ACCESS001
ACCESS001
IF AUTHORIZATION CARD IS LOST OR STOLEN,
CONTACT CUSTOMER SERVICE FOR REPLACEMENT.
ENTERPRISE TABLET INSTALLATION GUIDE
6
MTI P/N 063-1407-00 rev C ©2013 MTI All Rights Reserved
MTI 1050 NW 229th Avenue Hillsboro, OR 97124 T:800.426.6844 www.mobiletechinc.com
FCC Information
Federal Communication Commission interference statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures: -Reorient or relocate the receiving
antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into
an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an
experienced radio/TV technician for help.
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. this device may not cause harmful interference and
2. this device must accept any interference received, including interference that may cause undesired
operation
RF Exposure Warning
The equipment complies with RF exposure limits set forth for an uncontrolled environment. The
antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
You are cautioned that changes or modications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.