Model Rectifier 170495 RF Transceiver module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	784555
Application ID	So4R4tDWb7KnfKP6uSudRA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.33kB (29151 bits)
Date Submitted	2007-04-24 00:00:00
Date Available	2007-04-24 00:00:00
Creation Date	2007-04-18 09:27:01
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2007-04-18 09:27:01
Document Title	untitled

Shenzhencoolwave communication Co,ltd
Federal Communication Commission Interference
Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any
other antenna or transmitter.
Module Device
This device is intended only for OEM integrators under the following conditions:
OEM integrator is still responsible for testing their end product for any additional compliance
requirements required with this module installed (for example, digital device emissions, PC
peripheral requirements, etc.).
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain
laptop configurations or co-location with another transmitter), then the FCC authorization is
no longer considered valid and the FCC ID can not be used on the final product. In these
circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization.
Without Co-located
The antenna(s) used for this transmitter must not be co-located or operating in conjunction
CWMRF01-A
第1页
Shenzhencoolwave communication Co,ltd
with any other antenna or transmitter.
Modular OEM Integrator Notice
End Product Labeling
The final end product must be labeled in a visible area with the following: “Contains TX FCC
ID: BTQ170495”.
CWMDP01
UART WIRELESS TRANSCEIVER MODULE
一、PRODUCT BRIEF
CWMDP01 UART transparent wireless transceiver module is based on the chip of
Semtech XE1201A，monophonic module, which operating frequency is 300－
500MHz.This kind of module adopt the design of low transmission frequency，high Rx
sensitivity, highly satisfies with European ETSI（EN300-220-1 and EN301-439-3）and
FCC 15.231(a),complies with the demand of wireless control，no need to apply for
frequency using license.
★ Low consumption，Rx current 12MA
★ High integration
★ Switching time is short
★ No need to do second development
二.APPLICATIONS
RF security system
Process control、wireless sensing
Vehicle door control
keyless entry、building control
三、KEY PRODUCTS SPECIFICATION
CWMRF01-A
第2页
Shenzhencoolwave communication Co,ltd
Item
CWMDP01
Frequency
433.92MHz
Voltage
5V
Sensitivity
-108dBm
Modulation
FSK
Speed
25kbps
Transmitting distance
20m
Tx current
16mA
Rx current
10mA
Operating humidity
10%~90% relative humidity, no condensation
Operating temperature
-20℃~60℃
CWMRF01-A
第3页

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2007:04:18 09:27:01+08:00
Modify Date                     : 2007:04:18 09:27:01+08:00
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:0496f845-15cf-4ee4-8b0b-91eacadd8261
Instance ID                     : uuid:8d013fe1-ce74-47c6-b953-80bd22b4b671
Page Count                      : 3

EXIF Metadata provided by EXIF.tools