Modern 6002A REVOLUTION- 2 SPEED TURNTABLE WITH USB User Manual

Hong Kong Modern Marketing Manufacturing Limited REVOLUTION- 2 SPEED TURNTABLE WITH USB Users Manual

Users Manual

Revolutionwww.crosleyradio.com910-101011-0020-200Instruction ManualCR6002A
TroubleshootingGeneralTransportingSpecificationPower source : AC Adaptor AC120V/DC 9V 600mAPower Consumption : 6WAntenna : Built-in antenna for FM TRANSMTTERSpeed : 33 1/3,45 RPMSpeaker : 28 x 40 mm 8ohm 2WAudio output : 600mWReplacement Needle : NP4FM Transmtter Frequency : 88.1MHz / 89.9MHz* DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THISAPPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER.PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLEPARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICEPERSONNEL.The exclamation pointwithin an equilateraltriangle is intended toalert user to thepresence of importantoperating andmaintenance (servicing)instruction in theliterature accompanyingthe appliance.RISK OF ELECTRIC SHOCKDO NOT OPENCAUTIONCAUTION: TO REDUCETHE RISK OF ELECTRICSHOCK, DO NOT REMOVECOVER (OR BACK). NOUSER - SERVICEABLEPARTS INSIDE. REFERSERVICING TO QUALIFIEDSERVICE PERSONNEL.The lighting flash witharrowhead symbol, withinan equilateral triangle, isintended to alert user tothe presence of uninsulated"dangerous voltage" withinthe product's enclosurethat may be of sufficientmagnitude to constituterisk of electric shockto persons.9There is no Power1Make sure unit is plugged in correctly.2Replace batteries3The unit is not turned on: press the POWER button to ON Position.There is no Sound1Slide the VOLUME CONTROL to raise volume.2Check to make sure headphones are not plugged into the unit.No signal on FM Transmitter1Make sure TRANSMITTER SWITCH is on theON position.2Make sure the unit and the FM tuner are set to the same frequency.3Check that the distance between the two is 20feet or less.4Remove obstructions to minimize interference.5Try moving the Revolution closer to the FM tuner to reduce signal interference.To safely transport your Revolution, follow thesteps below to prevent damage to your unit.1Place protective needle cover over needle.2Place the 45rpm adapter on the revolution asshown below3Move the TONE ARM from the ARM REST and position it over the 45rpm adapter and align the TONE ARM with the grooves in the45rpm adapter as shown below.4Gently press TONE ARM into grooves on 45rpm adapter.5Close the LID and check to make sure it is secure.
This unit is equipped with a built in FM transmitter.This feature allows the user to listen to their albumson any FM radio within approximately 15-20 feet.To use this feature, follow the instructions below.1Slide the TRANSMITTER ON/OFF switch to the ON position.2Slide the FREQUENCY SELECT switch to either 88.1 or 89.9 MHz.3Adjust the tuner on your FM radio to match the selected frequency from step 2.4Follow the instructions for Turntable Operationon the left side of this page.5Adjust the volume of your FM radio accordingly.Notes:1Switch between the two frequencies listed above to determine which gives you the bestsignal for your location.2The maximum range of the FM Transmitter isapproximately 20 feet,depending on your location.3For best performance, a clear line of sight between the Revolution and your FM radio isrecommended.1Press the POWER button to turn the unit on.2Set the SPEED CONTROL SWITCH to the correct speed (33-1/3 or 45) for the selected record.3Slide the LID LOCK towards the rear of the unitto open the lid.4Lift the TONE ARM from its rest and gently moveit to the right until it clicks into the ARM LOCK as shown below.5Remove the 45rpm adapter from the unit. If youare playing a 45 rpm record, place the adapteron the spindle.6Place record on the turntable.7Gently move the tone arm from the ARM LOCKand lower it to the desired starting point on therecord.8Slide the VOLUME CONTROL to adjust the volume level.9At the end of the record, lift the TONE ARM fromthe record and return it to the ARM REST.Turntable FM TransmitterBasic Operation Control LocatorsTONE ARMSPINDLETURNTABLEPOWERINDICATORPOWERON/OFFSWITCHSPEEDCONTROLSWITCHVOLUMECONTROL45 RPM ADAPTER ARM HOOK47LID LOCK CARRY STRAP
IMPORTANT SAFETY INSTRUCTIONPLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT SAFEGUARDS THAT ARE APPLICABLE TO YOUR EQUIPMENT1. Read Instructions - All the safety and operating instructions should be read before the product is operated.2. Retain instructions - The safety and operating instructions should be retained for future reference.3. Heed Warnings - All warnings on the product and in the operating Instructions should be adhered to.4. Follow Instructions - All operating and use instructions should be followed.5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.Usea damp cloth for cleaning.6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.7. Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, orlaundry tub; in a wet basement; or near a swimming pool; and the like.8. A product and cart combination should be moved with care. Quick stops, excessive force, and unevensurfaces may cause the product and cart combination to overturn.9. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliableoperation of the product and to protect it from overheating, and these openings must not be blockedor covered, The openings should never be blocked by placing the product on a bed, sofa, rug, orother similar surface. This product should not be placed in a built - in installation such as a bookcaseor rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.10. Power Sources - This product should be operated only from the type of power source indicated on the marking label,if you are not sure of the type of power supply to your home. Consult your product dealer or local power company.Forproducts intended to operate from battery power, or other sources, refer to the operating instructions.11. Grounding or Polarization - This product may be equipped with a polarized alternating-current line plug (a plug havingone blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet try reversing the plug, If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.12. Power - Cord Protection - Power - supply cords should be routed so that they are not likely tobe walked on or pinched by items placed upon or against them, paying particular attention tocords at plugs, convenience receptacles, and the point where they exit from the product.13. Lightning - For added protection for this product during a lightning storm, or when it is leftunattended and unused for long periods of time, unplug it from the wall outlet and disconnectthe antenna or cable system. This will prevent damage to the product due to lightning and power - line surges.14. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electriclight or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.15. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.16. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short - out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.17. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerousvoltage or other hazards. Refer all servicing to qualified service personnel.18. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnelunder the following conditions;a. When the power-supply cord or plug is damaged.b. If liquid has been spilled, or objects have fallen into the product.c. If the product has been exposed to rain or water.d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.e. If the product has been dropped or damaged in any way.f. When the product exhibits a distinct change in performance - this indicates a need for service.19. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.20. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safetychecks to determine that the product is in proper operating condition.21. Wall or ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer.22. Heat - The product should be situated away from heat sources such as radiators. Heat registers, stoves, or other products (including amplifiers) that produce heat.WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance couldvoid the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications. However, there is no guaranteethat interference will not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correctthe interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio TV technician for help.ACPolarized PlugLIMITED MANUFACTURERS WARRANTYCrosley Radio, Inc. warrants the product to be free from defects in material andworkmanship under normal use for a period of one year from the original date ofpurchase. This warranty is not transferable. If the product is determined to be defectiveduring the warranty period, the unit will be repaired or replaced at Crosley Radio’s solediscretion. This warranty covers manufacturing defects and normal consumer use anddoes NOT cover damage or failure as a result of abuse, accident, alterations, misuse,neglect, abnormal wear and tear, inadequate maintenance, commercial or unreasonableuse, damage caused by power surges, mishandling, accident, acts of God or attemptedrepair by an unauthorized service agent. Also not covered are cosmetic damages,cords and antennas.Should this product fail to function in a satisfactory manner, it is best to first return itto the store or retailer where it was originally purchased. If additional service is stillneeded, the original purchaser must FIRST contact our offices to obtain an RA (ReturnAuthorization) Number.TO OBTAIN AN RA NUMBERCALL: 1.888.CROSLEY(1.888.276.7539)Send the unit prepaid to the address below in the original packaging (or reasonablesubstitute to prevent damage). Clearly mark your RA number on the outside packagingand include the original sales receipt (or a copy) indicating date of purchase, amountpaid, and place of purchase. You must also include your full name, shipping addressand daytime contact number. Please include a check or money order in the amountof $19.95, made payable to Crosley Radio, to cover handling and return shippingcharges. Returned products will not be shipped to PO Boxes. Crosley Radio will notbe responsible for delays or unprocessed claims resulting from a purchaser’s failureto provide any or all of the necessary information.CROSLEY RADIOATTN: RETURNS DEPT2001 PRODUCTION DRIVELouisville, KY 40299For additional support: Crosley Radio Consumer Service Department24 hours a day / 7 days a weekTelephone: 1.888.CROSLEY (1.888.276.7539)There are no express warranties except as listed above.The purchaser’s bill of sale is the only proof of warranty entitlement.This warranty gives the purchaser specified legal rights in addition to any rights whichmay vary from state to state.In accordance with the “Moss-Magnuson Warranty Act” of July 10, 1975, this is termeda “limited warranty” which in no way compromises Crosley Radio’s high standards ofquality and workmanship.10
Using the included software and cable, the USBconnection allows you record your records onto yourcomputer. Follow these instructions to use the USB.1Insert the enclosed software CD into your computer.2Connect the small end of the USB cable to theUSB JACK on the back of the unit.3Follow the instructions on the computer screento install the software. If the software does notload automatically, browse the CD and open the Read Me folder for further instructions.4Connect the other end to a USB port on your computer.5On your computer, open the Record RecordingSoftware.6For instructions on operating the Record Recording Software, browse the software CD and open the Read Me folder.Using the Audio Output allows you to listen to yourRevolution on a home stereo, TV or other stereosource. The type of cable needed will varydepending on the input jack configuration of yourexternal device. The output jack on your Revolutionis a standard 3.5mm stereo output. See your localelectronics store to purchase the correct cable foryour needs. For more information on hooking upto an external device, see the owner's manual forthe selected device.Note: You can still listen to your unit when usingthe Audio Output feature.Getting StartedControl Locators...................... 4,5Unpacking............................... 6Power Source......................... 6Headphones Jack Operation........ 6Battery Operation....................... 6Basic OperationTurntable ................................ 7FM Transmitter ....................... 7USB Output............................... 8Audio Output .......................... 845rpm Adapter ....................... 8GeneralTransporting ........................... 9Troubleshooting Guide ........... 9Warranty.................................. 10About This ManualWelcome Table of ContentsThank you for purchasing the Crosley Revolution(CR6002A) Before operating this unit, please readthis manual thoroughly and retain it for futurereference.Instructions in this manual describe the controlfunctions of the CR6002A.Included in the package:Crosley RevolutionAC Power Adaptor45 RPM AdaptorUSB CableSoftware CDSoftware Installation GuideUSB Audio OutputAccessory:ADAPTER FOR 45 RPMThis adaptor allows you to play 45 RPM records.1Place the 45 RPM adapter over the spindle.2Gently place your 45 RPM record onto the turntable.3Follow the steps under turntable operation toplay your record.Basic Operation8
1Remove plastic bag covering unit.2Remove AC ADAPTER from packing.3Remove tie from A/C ADAPTER.4Open lid and remove styrofoam shippingmaterial from turntable.5Remove white protective needle cover by gentlypulling towards the front of the unit.Power Source1Plug the AC ADAPTER into appropriate walloutlet.2Plug the small end of the adapter into the ADAPTER JACK on the back of the unit.Battery OperationGetting StartedUnpacking1Connect headphones to the Headphone Jack.2Adjust volume to the desired listening level.Note: When using headphones, sound from the unit will be turned off.NOTE: Headphones not included with unit.Headphones Jack operationThe sound from all speakers is cut off.Headphone Jack61. The battery compartment is located at the bottom of the unit. Push the lever at the centerof the door toward the rear of the unit, then liftthe door free.2. Six "AA" size batteries are required. Refer to the orientation diagram shown inside the battery compartment when installing.3. Replace the battery cover.IMPORTANT:Remove all batteries from your unit if it will not beused for an extended period of time.Do not use rechargeable batteries and do not leavedischarged batteries in the battery compartment.Control LocatorsUSB OUT LINE OUT DC 9VHEADPHONE JACKDC IN JACKUSB OUTLINE OUT JACK5UM-3 (AA) x 6BATTERY COMPARTMENTOPEN88.1MHz 89.9MHzTRANSMTTERON/OFF SWITCHFREQUENCYSELECT SWITCH

Navigation menu