Modern TR1003 Fireplace remote control transmitter User Manual

Modern Co., Ltd. Fireplace remote control transmitter TR1003 Instructions

a href="https://usermanual.wiki/Modern" itemprop="url"> Modern >

User manual

Version1.0(2016)Page1INSTALLATION & OPERATING INSTRUCTIONS (Model:TR1003) IF YOU CANNOT READ OR UNDERSTAND THESE INSTALLATION INSTRUCTIONS, DO NOT ATTEMPT TO INSTALL OR OPERATE. INTRODUCTION This Durablow remote control systemis toprovide a safeand reliableremote control systemforgas heating appliances, such as fire fireplace.The systemcan be operated thermostatically or manually from the transmitter (remote handset).The systemoperates on radio frequencies (RF) within a 20-foot range using non-directional signals.The remote receiver box code mustbe matched tothe transmitter prior toinitial use(see LEARNING TRANSMITTER TO RECEIVER). ReadALL sections and original manufacturer manual for safety installation before any action. These safety features shut down the system and appliance, such as fireplace when a potentially unsafe condition exists, such as high-heat. Contents: Page 1 PACKING LIST ........................................................ 2 2 LCD DISPLAY ICONS ........................................................ 2 3 BASIC TRANSMITTER FUNCTIONS& MODES ........................................................ 2 4 SETTING UP THE TRANSMITTER ........................................................ 3 5 SETTING THE CLOCK ........................................................ 3 6 CONVERTING ºF / ºC SCALE ........................................................ 3 7 REMOTE RECEIVER BOX ........................................................ 4 8 WARNING &REMINDER ........................................................ 4 9 PREINSTALLATION ........................................................ 5 10 WALL MOUNTING ........................................................ 5 11 HEARTH MOUNT ........................................................ 5 12 WIRING INSTRUCTIONS ........................................................ 6 13 LEARNING TRANSMITTER TO RECEIVER ........................................................ 7 14 SYSTEM TESTS & CHECK LIST ........................................................ 7 15 ADDITIONAL INFORMATION ........................................................ 8 16 TROUBLE SHOOTING ........................................................ 10 17 WARRANTY & LEGAL DISCLAIMER ........................................................ 11
Version1.0(2016)Page218 FCC / ID ........................................................ 11 PACKING LIST: Please check and make sure all parts are in good condition before installation. Any questions, please do NOT return to dealer, but email us (info@payandpack.com) immediately, we will do our best to assist you. Thank you. 1. Remote transmitter (1), Remote receiver box w/ 18” wire (1) 2. Wall mount cover plate (1), Switch box screw (2), Slide switch button (1) 3. 1.5V Batteries: AA-size (4), AAA-size (2) 4. Installation Instructions (1) Fig. 1 Transmitter Fig. 2 LCD display on transmitter LCD DISPLAY ICONS (Fig. 2) 1.LOW BATTERY - Once it appears which means battery power is low.Replace batteries in 2 weeks. 2.TIMER*1– Indicates time remaining before systemshuts OFF.Maximum 9-hour setting for timer programming. 3.MODE – Indicates system operation modes.ON means the systemis manually ON.OFFmeans the entiresystemis OFF.THERMO*2means the systemwill automatically cycle ON/OFF,with the desired set temperature. 4.SET– Indicates desiredsetroom temperature ofTHERMO*2 mode. (works with ROOM) 5.FLAME– Indicates burner/valve is at ON position. 6.CLOCK – Indicates the current time. 7.ROOM– Indicates CURRENTroom temperature. 8.°F / °C– Indicates degrees in Fahrenheit or Celsius (convertible). BASICTRANSMITTERFUNCTIONS& MODES NOTE: For model TR1002-T, the THERMO mode is NOT included; For TR1002-TH, the TIMER mode isNOT included. IMPORTANT:The transmitter requires twoAAA-size 1.5V batteries (included).New (fully charged) batteries arerequired for proper functionality ofthe system.Insertbatteries into the transmitterbattery compartment on the back,positioning the (+) and (-) ends ofthe batteries as indicated on the casing. (Fig. 1)When the batteries are inserted properly, LCD will display initial numbers.
Download:
Mirror Download [FCC.gov]
Document ID3259095
Application ID38NS/Z5UaZGJYPrumf5iXw==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize88.68kB (1108537 bits)
Date Submitted2017-01-14 00:00:00
Date Available2017-01-14 00:00:00
Creation Date2016-12-23 11:47:57
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2016-12-23 11:47:57
Document TitleMicrosoft Word - TR1003 Instructions
Document CreatorPScript5.dll Version 5.2.2
Document Author: Administrator
FCC ID Filing: 2AKOB-TR1003

Navigation menu