Molex CVS Dabendorf 182-00 On board vehicle Wireless Charging Unit User Manual Exhibit 9 RK7182 00 Information to the user 01

Novero Dabendorf GmbH On board vehicle Wireless Charging Unit Exhibit 9 RK7182 00 Information to the user 01

Contents

Users manual

RK7182-00 / 4774A-18200 Information to the User
ENGLISH:
FCC/INDUSTRY CANADA NOTICE
This device complies with part 15 of the FCC rules and with Industry Canada license-exempt
RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
FCC ID: RK7182-00
IC: 4774A-18200
Any changes or modifications not expressly approved by Novero could void the user's authority
to operate this equipment.
FRENCH:
FCC/Notice d’industrie du Canada
Cet équipement est considéré comme conforme aux conditions de la section 15 de la
réglementation de la FCC. Il répond aux deux conditions suivantes:
1. Ce dispositif ne causera aucune interférence nuisible;
2. Ce dispositif peut accepter toute interférence reçue, notamment l’interférence entraînant un
fonctionnement indésirable.
FCC ID: RK7182-00
IC: 4774A-18200
Les changements ou modifications non approuvés expressément par nover peuvent entraîner
la caducité de l’autorisation d’utiliser l’équipement.
L
WIRELESS PHONE CHARGER
L
WIRELESS PHONE CHARGER
The wireless phone charger is located in the middle console. The charger is only compatible with
Qi enabled devices, with a maximum width of 2.8 in (71 mm).
Note: iPhones require a Qi enabling phone cover for wireless charging.
Make sure the phone screen is facing the driver's seat. Press the base of the phone onto the
wireless phone charger lid, and then fully insert the phone, as illustrated. The wireless phone
charger lid rotates to allow access and to secure the phone into position.
Lightly pull up the phone to remove. The wireless phone charger lid rotates back to the closed
position, preventing foreign objects entering the charger.
Note: Some phone covers may require removal if the phone installation or charging is impaired.
The current charging status is indicated by an LED indicator lamp on each side of the wireless
phone charger.
Amber illumination indicates the phone is charging.
No illumination indicates the phone is fully charged, or not charging.
Red illumination indicates a system fault. For example, the current temperature is excessively hot
or cold, foreign object detection, and radio frequency interference.
Do not place a smart key or key fob in close proximity to the charger.
Do not store items in the charger.
No maintenance is required.Do not use aerosols, sprays, liquids, solvents, or abrasives.

Navigation menu