Molex CVS Dabendorf MC3000NA Compenser User Manual 20380000 01 gb

Novero Dabendorf GmbH Compenser 20380000 01 gb

Contents

UserMan

TM203 8000 0.01Compenser™Installation Manual01049 ACC
-2-TMRAYTEL LLCa Nevada Limited Liability Company711 Eighth Avenue, Suite GSan Diego, CA 92101, USAT: +1 619 234-5929F: +1 619 234-5853www.raytel-llc.comSales, Service and Support Office:8820 Kenamar Drive, Suite 506San Diego, CA 92121, USAT: +1 858 566-2170F: +1 858 566-2179sales@raytel-llc.comsupport@raytel-llc.com
-3-Compenser™ Table of ContentsTable of ContentsIntroduction ....................................................................................... 4RF Radiation Exposure ...................................................................... 4Parts List ............................................................................................ 5Safety Precautions ............................................................................ 6Functional Description...................................................................... 8Principle of Operation.......................................................................... 8Installation Guide.............................................................................. 9Required Accessory Items and Tools.................................................. 9Getting Started.................................................................................... 9Selecting the Mounting Position ....................................................... 10Preparations ...................................................................................... 11Installation ......................................................................................... 12Operating the COMPENSER™ ....................................................... 13Declaration of Conformity.............................................................. 14Support ............................................................................................ 14Warranty .......................................................................................... 14Changes ........................................................................................... 14Drilling Template.............................................................................. 15
-4-Compenser™IntroductionWelcomeThank you very much for purchasing the Compenser™ from RAYTEL LLC.The COMPENSER™ provides optimum transmission and reception in yourvehicle when using an external vehicle antenna. Furthermore it improves theoperation of your mobile phone in conjunction with the use of a hands-freedevice.IntroductionThis installation manual for the COMPENSER™ contains all necessaryinformation required to install the COMPENSER™ into your car. TheCOMPENSER™ has been designed for easy installation, however Raytelrecommends strongly to have the system installed by a professional installer.Raytel's Limited Warranty is void unless installed by a qualified professionalinstaller. Please visit our website www.raytel-llc.com for a listing of Raytel'squalified professional installers near you.RF Radiation ExposureThe external antenna used for this mobile transmittermust provide a separation distance of at least 20 cmfrom all persons and must not be co-located oroperating in conjunction with any other antenna ortransmitter.The maximum allowed output power is 3 Watt andthe maximum gain of the antennas to be used is 0 dBi.
-5-Compenser™ Parts ListParts ListThe packing unit should include the following items:Compenser™Cable for Connection to Hands-Free-Car Kit (5m/16.5ft.)Adapter for Connection to Antenna (10cm/4 in)Power Supply Cable (3 Wires with a Plug)4 Fixing Screws • Installation Manual • Installation Report • Registration and Warranty Card • RAYTEL LLC Limited Warranty PolicyFigure 1➀➁➂➃➄
-6-Compenser™Safety PrecautionsSafety PrecautionsImproper Installation:The installation of the COMPENSER™ requires special knowledge, abilitiesand tools. Improper installation may cause damage to the unit or to thevehicle! We therefore strongly recommend having the installation done by aprofessional installer.Personal Injury:Inappropriate places for the installation of the COMPENSER™ may causepersonal injury in accidents or may disable the safety equipment of thevehicle! Note the directions in the chapter Installation! When removingcoverings or dashboard parts, sharp tools may cause personal injuries ormaterial damage. Use adequate tools and remove parts carefully. Don't nick,cut or pull existing car wiring harnesses.Damage to Insulation of Wires:Damaged insulation on any wire of the existing vehicle wiring or the wiring ofthe COMPENSER™ system may cause damage to the unit, damage to theelectrical system of the vehicle, and may cause short circuiting and fire. Allwires should not be pinched or nicked and should be properly fixed to avoidany tensile stress or possible damage by chafing!Damage by Polarity Reversal or Short-Circuit:Incorrectly connected wires may cause a polarity reversal or short-circuit. Thiswill result in severe damage to the equipment. It is essential to disconnectthe car battery before beginning the electrical installation of theCOMPENSER™!THE RAYTEL LLC LIMITED WARRANTY IS VOID UNLESSTHE COMPENSER™ IS INSTALLED BY A QUALIFIEDPROFESSIONAL INSTALLER.
-7-Compenser™ Safety PrecautionsDamage of Car Components:Drilling holes or using self-tapping screws when mounting theCOMPENSER™ may cause damage to important vehicle components or tothe wiring.Make sure there is enough space left behind drilling holes and screws!Effects on the Car's Electrical System:Although the COMPENSER™ has been designed for minimum radiationlevels, improper installation of components of the system may influence theelectronic equipment of the vehicle. Please note the instructions in thevehicle's owner's manual!Damage Caused by Wrong Replacement Parts or Accessories:Please visit Raytel's website www.raytel-llc.com for further information onreplacement and accessory parts!Proper Use:The COMPENSER™ is to be used in cars only with a mobile phone thatworks in the GSM850 / GSM1900 MHz bands.Never spill liquid of any kind on this product.Do not disassemble this product. Take it to a qualified service center whenservice is required.
-8-Compenser™Functional DescriptionFunctional DescriptionThe COMPENSER™ is a bi-directional transmitting and receiving booster whichcompensates for all cable and plug losses which occur in the signal pathbetween the mobile phone and the external antenna. This provides optimumcall quality through optimized transmitting and receiving characteristics.The COMPENSER™ is ready for operation when the vehicle's ignition is turnedon. When there is no telephone call in progress, only the two receivingamplifiers are active. During a telephone call the two transmitting amplifiers arealso active. The COMPENSER™ continues to be operational for approx. 2 hoursafter turning off the ignition. Only after the end of this time the COMPENSER™switches off completely (standby); this allows continued use during short stops.In the standby mode the power consumption is minimal (< 0.1 mA), therebysparing the car battery. When the ignition is turned on again, theCOMPENSER™ is active again.The timer function can be put out of operation by wiring the ignition connectionto the permanent plus (fig. 3, terminal 30, +). The COMPENSER™ is always onthen (CAUTION! This means constant power consumption and use of the carbattery!)Principle of operationFigure 2
-9-Compenser™ Installation GuideInstallation GuideThe following installation instructions are not meant to be a guide for selfinstallation, rather than a supporting document for the professional installer.Should you decide to install the COMPENSER™ yourself, which will void theRAYTEL LLC Limited Warranty, please read and follow the installationinstructions very carefully and strictly observe all safety precautions.Required Accessory Items and ToolsTo perform the actual installation, the following tools are required:~ Philips Screwdriver PH 1~ Universal Pliers~ Side-Cutting Pliers~ Variable Speed Hand Drill~ 3.2 mm Drill Bit (Metal)~ 9 mm Wrench~ Multimeter or Test Lamp~ Vehicle Specific Tools for Removing Coverings~ Wire Straps~ 3 cable connector clampsGetting StartedBefore you start with the installation of the COMPENSER™ make sure that allparts as listed in the Parts List are present. In order to fully operate theCOMPENSER™ you will need the following additional parts and accessories,which are available through Raytel's authorized distributors and dealers:• Mobile Phone Antenna: An external mobile phone antenna is required foroperating the COMPENSER™.Improper Installation: The installation of theCOMPENSER™ requires special knowledge, abilities andtools. Improper installation may cause damage to the unitor to the vehicle! We therefore strongly recommendhaving the installation done by a professional installer.
-10-Compenser™Installation GuideRaytel recommends the use of its Mobile Phone Antenna which will fit to theantenna cable adapter of the COMPENSER™. Should you decide to use anexisting mobile phone antenna of another brand, you may have to use anAntenna Adapter.After having checked and made available all above mentioned required parts forthe installation of the COMPENSER™, you should look at the vehicle's owner'smanual for the following items:• The vehicle's main available power source should be nominal 12 VDC withminus connected to ground. The COMPENSER™ operates between 11 VDC and 15 VDC.Selecting the Mounting PositionIncorrect installationIncorrect installation can cause damage to the appliance or vehicle. Specialknowledge and skills are required to install the COMPENSER™. Werecommend you to have it installed by a specialized workshop.The COMPENSER™ should preferably be installed in the vehicle's trunk, asnear as possible to the external mobile phone antenna. It is not permissible toinstall it in the engine compartment.Personal Injury: Inappropriate places for the installation ofthe COMPENSER™ may cause personal injury inaccidents or may disable the safety equipment of thevehicle! When removing coverings or dashboard parts,sharp tools may cause personal injuries or materialdamage. Use adequate tools and remove parts carefully.Don't nick, cut or pull existing car wiring harnesses.Damage of Car Components: Drilling holes or using selftapping screws when mounting the COMPENSER™ maycause damage to important vehicle components or to thewiring. Make sure there is enough space left behinddrilling holes and screws!
-11-Compenser™ Installation GuideThe COMPENSER™ may only be opened by authorized specialized workshops.The guarantee is void if opened by any other person. If you require service,please ask your specialized dealer or contact our customer and product supportdepartment.PreparationsFirst decide on where to install the COMPENSER™, taking into considerationthe safety criteria, and fitting it as close as possible to the antenna.Now decide on the connection points for permanent plus (terminal 30, +),grounding (terminal 31, -) and ignition / switched plus (terminal 15, ignition). Theconnection points permanent plus and ignition must be fused here. Thefollowing fuses may be used:• permanent plus: fuses 2 A to 5 A• Ignition: fuses 2 A to 5 APut out the 3 copper wires, red, brown and blue, with cross-section 0.75 mm².The 3 wires are assigned as follows:• red: permanent plus• brown: ground• blue: ignition / switched plus leadYou need cable connectors for connecting the 3 copper wires to the equivalentcables of the car wiring harness.If the external mobile phone antenna already has an RF-cable, shorten the cableto the necessary length and crimp an FME cable jack on the open end.If possible do not use antennas with RF cable RG 174 and suchlike as these leadto increased losses particularly with GSM 1900.Have a size 3.2mm drill ready to bore the mounting holes. The last page of thisinstallation manual shows a drilling template for punch-marking the mountingholes.It is important to use the provided cable set to complywith FCC rules concerning Maximum PermissibleExposure Safety limits.The cable between COMPENSER™ and antenna must be atleast 3.3ft (1m). Please use an omnidirectional 0dBi antenna.
-12-Compenser™Installation GuideFigure 3InstallationDisconnecting the minus pole in the car batteryThe minus pole in the car battery must always be disconnected during work onterminals in the vehicle's electrical system. It is recommended to disconnectthe minus pole during the entire installation.Risk of injury: Unsuitable installation locations can causeinjuries during a traffic accident or render safety devicesineffective. Do not install the COMPENSER™ in theairbag's action area.
-13-Compenser™ Operating the COMPENSER™The COMPENSER™ will be installed as shown in Figure 3.First lay the (5m/16.5ft) RF cable type RG58, inserted between the mobilephone holder / hands-free kit and the COMPENSER™. Tighten the plug on bothsides torque : 1 Nm/0.7ft./lb.. The telephone connection ( ) on theCOMPENSER™ is to be used for this purpose.Then plug the adapter (10cm/4in. RF cable) to the antenna connection on theCOMPENSER™ ( ).Lay the individually prepared antenna cable between the COMPENSER™ andthe mobile telephone antenna and tighten the FME plug (torque: 1 Nm/0.7ft./lb.). Now lay the three power supply wires between the COMPENSER™ and theconnection points. Connect them to the cable extension and see to it that youmatch the colors. Then first clamp the ground wire (brown) at the definedterminal connection point (terminal 31), then the permanent plus wire (red) atthe defined terminal connection point (terminal 30) and finally the ignition wire(blue) at the defined terminal connection point (terminal 15).During this work on the terminals the car battery's minus pole must bedisconnected.Next connect the power supply cable's connector (female multipoint) to theCOMPENSER™'s connector (pin panel). There must be an audible "click" whenthe plug snaps in. Finally screw on the COMPENSER™ with the four sheet-metal screws included and connect the minus cable to the car battery again.Operating the COMPENSER™Make sure the ignition is off and then use a voltmeter at the point of connectionbetween the connection cable and the extension wires to check if thepermanent plus is connected correctly.In the event of a polarity reversal, correct the wiring. The COMPENSER™ isprotected against polarity reversal; it will not be damaged in any way.Turn on the ignition and check at the point of connection between theconnection cable and the extension wires if the ignition wiring is connectedcorrectly (+12 V between blue and brown).Set up a mobile phone connection and check if the connection works perfectly.
-14-Compenser™Declaration of ConformityDeclaration of ConformityThis device complies with part 15 of the FCC rules.Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.SupportCustomer support and product assistance is available by e-mail:support@raytel-llc.com.If you would like to speak to a Raytel customer support representative,please call on weekdays between 9 am and 5 pm pacific time Raytel's hotline:(858) 566-2170. One of our customer support representatives will be glad toassist you. Be prepared to answer the following questions: which type ofmobile phone you are using with your Compenser™, who installed theCompenser™ and when was it installed.WarrantyPlease refer to the separately attached RAYTEL LLC Limited Warranty.ChangesAs a result of technical progress all information and illustrations of thisInstallation Manual are subject to modification. RAYTEL LLC reserves all rightsto changes to the product. Reprinting and reproduction, in part or in full, of thisInstallation Manual is not permitted without express written consent.
-15-Compenser™ Drilling TemplateDrilling Template
TMVisit us at www.raytel-llc.com© RAYTEL LLC. All rights reserved. RAYTEL™ and Tellphone™ are trademarks of RAYTEL LLC. Compenser™ is a Registered Trademark of Funkwerk Dabendorf GmbH.Printed in Germany. Issue 01/04

Navigation menu