Monoprice DTBT Bluetooth Desktop Powered Speakers User Manual Manual Model 36573

Download:
Mirror Download [FCC.gov]
Document ID	4177274
Application ID	cN+mkb1Y30jzYZ8V6cvctg==
Document Description	Manual_Model_36573
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25.14kB (314282 bits)
Date Submitted	2019-02-22 00:00:00
Date Available	2019-02-22 00:00:00
Creation Date	2019-02-20 17:07:21
Producing Software	Microsoft® Word 2013
Document Lastmod	2019-02-21 12:17:39
Document Title	Manual_Model_36573
Document Creator	Microsoft® Word 2013

DT-5BT Desktop Speakers
P/N 36573
User's Manual
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device, paying extra attention to these
safety warnings and guidelines. Please keep this manual in a safe place for future
reference.

These speakers are intended for indoor use only.

Do not expose these speakers to water or moisture of any kind. Do not place
drinks or other containers with moisture on or near them. If moisture does get in
or on them, immediately unplug them from the power outlet and allow them to
fully dry before reapplying power.

Do not touch these speakers, the power cord, or any other connected cables
with wet hands.

If operating these speakers in a humid environment, ensure that no
condensation occurs. Condensation could cause damage to the speaker cone
and could cause a short in the amplifier, which in turn could cause fire or severe
electric shock.

Do not expose these speakers to excessively high temperatures. Do not place
them in, on, or near heat sources, such as a fireplace, stove, radiator, etc. Do not
leave them in direct sunlight.

Prior to operation, check the speakers and power cord for physical damage. Do
not use if physical damage has occurred.

Before plugging these speakers into a power outlet, ensure that the outlet
provides the same type and level of power required.

Take care to prevent damage to the power cord. Do not allow it to become
crimped, pinched, walked on, or become tangled with other cords. Ensure that
the power cord does not present a tripping hazard.

Never unplug the speakers by pulling on the power cord. Always grasp the
connector head or adapter body.

Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or
detergents. For stubborn deposits, moisten the cloth with warm water.

This device has no user serviceable parts. Do not attempt to open, service, or
modify this device.
FEATURES

5.25" polypropylene cone woofer

0.75" silk dome tweeter

45Hz ~ 20kHz frequency response

Class AB amplifiers with 2x 15 watts to the woofers and 2x 10 watts to the
tweeters

Stereo RCA, stereo 3.5mm TRS, stereo 1/4" TRS balanced inputs, and Bluetooth®
inputs

Includes 3.5mm headphone output
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your
ordering, purchasing, and delivery experience is second to none. If you have any
problem with your order, please give us an opportunity to make it right. You can
contact a Monoprice Customer Service representative through the Live Chat link on our
website www.monoprice.com or via email at support@monoprice.com. Check the
website for support times and links.
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the items listed
below. If anything is missing or damaged, please contact Monoprice Customer Service
for a replacement.
1x Pair DT-5BT Speakers
1x Speaker Interconnect Cable
1x 3.5mm Stereo Audio Cable
1x Stereo RCA Audio Cable
1x Foot Mat
1x User's Manual
PRODUCT OVERVIEW
Front View
1.
0.75" Silk Dome Tweeters
2. 5.25" Polypropylene Cone Woofers
3. 3.5mm AUX Input
4. 3.5mm Headphone Output
5. LED Bluetooth® Indicator
6. LED Power Indicator
7. Volume Knob
Rear View
1.
Stereo 1/4" TRS Balanced Input
2. Stereo RCA Input
3. Power Switch
4. Speaker Output Connector (Master Speaker)
5. AC Power Cord
6. Bluetooth® Pairing Button
7. Speaker Input Connector (Slave Speaker)
INSTALLATION
Perform the following steps to install these speakers.
1.
Ensure that the Power Switch on the Master Speaker is in the OFF position.
2. Rotate the Volume Knob on the Master Speaker fully counterclockwise.
3. Connect one end of the included Speaker Interconnect Cable to the Speaker
Input Connector on the rear panel of the Slave Speaker, then connect the other
end to the Speaker Output Connector on the rear panel of the Master Speaker.
4. (Optional) Plug one end of the included 3.5mm Stereo Audio Cable into the
3.5mm AUX Input on the front panel of the Master Speaker, then plug the other
end into the output of your audio source device.
5. (Optional) Plug one end of the included Stereo RCA Audio Cable into the Stereo
RCA Input on the rear panel of the Master Speaker, then plug the other end into
the output of your audio source device.
6. (Optional) Plug one end of a 1/4" TRS or TS audio cable (not included) into the
left channel Stereo 1/4" TRS Balanced Input on the rear panel of the Master
Speaker, then plug the other end into the left channel output of your audio
source device. Repeat for the right channel.
7. Plug the AC Power Cord into a nearby AC power outlet.
Note that the output of the speakers is the sum of all inputs. Unless you specifically
want to listen to a mix of different sources, only one audio input should be in active use
at a time.
BLUETOOTH PAIRING
Perform the following steps to pair your mobile device with the speakers.
1.
Flip the Power Switch on the rear panel of the Master Speaker to the ON
position. The LED Power Indicator on the front panel will illuminate.
2. Momentarily press and release the Bluetooth Pairing Button on the rear panel of
the Master Speaker. The LED Bluetooth Indicator on the front panel will begin
flashing, indicating that the speaker is in Bluetooth pairing mode.
3. Open the Bluetooth settings on your mobile device, then scan for nearby
Bluetooth devices.
4. Locate and select the DT-5BT entry. If prompted for a passcode, enter 0000 (four
zeroes). The LED Bluetooth Indicator will cease flashing, indicating that the
Bluetooth connection has been successfully made.
Note that once paired with your mobile device, the speakers will remember the pairing.
To reconnect after the connection has been broken, open the Bluetooth settings on
your mobile device and select Connect to reestablish the connection.
OPERATION
1.
Rotate the Volume Knob on the front panel of the Master Speaker fully
counterclockwise.
2. Flip the Power Switch on the rear panel of the Master Speaker to the ON
position. The LED Power Indicator on the front panel will illuminate.
3. Start audio playback on your audio source device.
4. Slowly rotate the Volume Knob clockwise until the volume is at a comfortable
listening level.
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with
any questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come
online to talk to one of our friendly and knowledgeable Tech Support Associates.
Technical support is available through the online chat button on our website
www.monoprice.com or through email by sending a message to tech@monoprice.com.
Check the website for support times and links.
SPECIFICATIONS
Model
36573
Woofer
5.25" polypropylene cone
Tweeter
0.75" silk dome
Amplifier Type
Class AB
Woofer Amplifier Power
15 watts/channel
Tweeter Amplifier Power
10 watts/channel
Frequency Response
45Hz ~ 20kHz
1x 3.5mm AUX, 1x Stereo RCA,
Inputs
1x stereo balanced 1/4" TRS, Bluetooth®
Output
1x 3.5mm headphone
Bluetooth Version
Bluetooth Pairing Name
DT-5BT
Input Power
110 ~ 120 VAC, 50/60 Hz
Dimensions (each)
7.3" x 10.3" x 8.0" (185 x 261 x 203 mm)
REGULATORY COMPLIANCE
Notice for FCC
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Modifying the equipment without Monoprice's authorization may result in the
equipment no longer complying with FCC requirements for Class B digital devices. In
that event, your right to use the equipment may be limited by FCC regulations, and you
may be required to correct any interference to radio or television communications at
your own expense.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
Radio Notice for FCC
Caution
This FCC Part 15 radio device operates on a non-interference basis with other devices
operating at this frequency. Any changes or modification to said product not expressly
approved by Monoprice, including the use of non-approved antennas, could void the
user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Notice for Industry Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Radio Notice for Industry Canada
Caution
This IC RSS-210 radio device operates on a non-interference basis with other devices
operating at this frequency. Any changes or modification to said product not expressly
approved by Monoprice, including the use of non-approved antennas, could void the
user’s authority to operate this device.
This device complies with IC RSS-210. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc.
10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2019:02:20 17:07:21+08:00
Modify Date                     : 2019:02:21 12:17:39+08:00
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : 
Creator Tool                    : Microsoft® Word 2013
Metadata Date                   : 2019:02:21 12:17:39+08:00
Producer                        : Microsoft® Word 2013
Document ID                     : uuid:22d036c5-e554-466c-8418-a4e304e94cb0
Instance ID                     : uuid:349116d3-7188-4ea5-be4f-7693cd74ac67
Page Layout                     : SinglePage
Page Count                      : 10

EXIF Metadata provided by EXIF.tools