Monster Digital CAMVP1080 Wifi Camera User Manual

Monster Digital, Inc. Wifi Camera Users Manual

UserManual.wiki >

Monster Digital >

CAMVP1080 User Manual HTML Version

15_CAMVP-1080 UserMan,r1

User’s Manual

CAMVP-1080

Foreword

Thank you for purchasing this WiFi video camera. It has an elegant appearance, many functions and can be used

for wide-angle shooting. Prior to use, please read this user’s manual carefully so as to show its performance and

extend its service life to maximum. We hope that this product can meet your needs and accompany you at your

side all the time.

Overview

Overview of

of the

the product

product

It is compact in size and convenient for installation;

A high performance chip is used to ensure that you can obtain high definition videos and highly

continuous dynamic pictures, and record videos at low luminance, and H.264 video format is

supported;

Support FHD(1920x1080 60FPS) video recording;

Support high-speed USB2.0;

Support Min SD card of max. 32G;

Support video output, live replay and output to HDTV to play HD pictures.

PIV -- Picture capture in video recording

System Requirements

Operating

System

PCCAM Microsoft Window XP(SP3), Vista, 7，8

Mac OS X ver: 10.8.0 or above version

MSDC Microsoft Window 2000，XP, Vista, 7，8

Mac OS X ver: 10.0.0 or above version

CPU Intel Pentium of more than 1GB Hz or other CPU with equivalent

performance

Internal Memory Larger than 1GB

Sound Card and Display

Card

The sound card and video card shall support DirectX8 or higher

version.

CD Driver Speed of 4 times or faster

HardDisk Freespaceofmorethan2GB

Others One standard USB1.1 or USB2.0 port

Introduction

Introduction to

to appearance

appearance and

and keys

keys

Display/Menu key

2.0’’ HD LCD

Lens

Infrared remote

control lamp Charging /Busy indicator

Busy indicato

Microphone

Wifi/Down key

HDMI port

Power/Mode key

Battery door

Micro SD Card

Shutter/OK key

Micro USB port

Speaker

Start

Start using

using _______

_______

1. Charge the built-in lithium battery

Connect the camera to the computer for charging, at this time, the charging indicator will be in red, and it will

be off after charging. Generally, it takes 2-4 hours to charge the battery.

USB cable

2. Use the storage card

1. Push the TF card into the slot till it is in place as per the instruction in concavely engraved words by the

storage card slot.

2. To take out the TF card, press the tail of the storage card inwardly softly and it will be popped out.

Note: There’s no built-in memory unit in the camera, so make sure to insert a storage card into it prior to

use (it is recommended that a TF card of better quality be used).

3. Power on/off

3.1 Power on: Press Power key for 3 seconds, the screen will be on and the camera will be started.

3.2. Power off: Hold on Power key for 3 seconds when the camera is in the idle state to turn it off.

3.3. Auto screen off: The screen will be turned off automatically when the time that the camera is in the idle

state for automatic screen off to save power. After that, the lamp for screen off will be on.

3.4. Power off when the camera is lack of electricity. When electrical quantity of the battery is very low, an

icon of will be displayed on the LCD screen, prompting you to charge it in time. When the icon

turns red and flickers, the camera will be turned off automatically.

4. Shift among functional modes

The camera has 4 modes, namely video recording mode, car-carrying mode, shooting mode and replay mode.

After power is on, press Power key to shift among them.

Video recording mode Car-carrying mode Shooting mode

Replay mode

5. Indicator

Busy indicator (red): When the camera is busy such as recording videos, shooting photos and turning off

screen automatically, the work indicator will flicker.

Charging indicator (blue): When it is on, the user is prompted that the camera is being charged and it will be

off after charging is completed.

6. Video recording mode

After power is on, the video camera will enter video recording mode directly and in preview mode, press

Shutter key to start video recording; Press it again to stop shooting. If the memory card is full or electrical

quantity is low, it will also stop shooting:

1. Icon of mode, indicating video recording mode;

2. Indicate quality of video;

3. Indicate size of video:1440P (30FPS)/FHD 1080P(60FPS)

/ HD 720P(120FPS) / HD 720P(60FPS) is optional;

4. Recording time, indicating recordable length of time;

5. Icon of battery, indicating current electrical quantity;

Note: short press power key to realize the camera video process

and save the image.

7. Car-carrying mode

After power is on, press Power key to enter car-carrying mode

1. Icon of mode, indicating car-carrying mode;

2. Indicate quality of video;

3. Indicate size of video:1440P (30FPS)/FHD 1080P(60FPS)

/ HD 720P(120FPS) / HD 720P(60FPS) is optional.

4. Recording time, indicating recordable length of time.

5. Icon of battery, indicating current electrical quantity

Prompt: In car-carrying mode, a passage of video is kept every three minutes in recording. After the storage

card is full, the earliest passage will be deleted, and video will be recorded in a circulating way.

8. Shooting mode

After power is on, press Power key twice to enter shooting mode, and in preview state, press Shutter key to

take a photo:

1. Icon of mode, indicating the current is shooting mode;

2. Size of video, and 4M/5M/8M/16M is optional;

3. Counter, indicating number of photos to be taken;

4. Icon of electrical quantity of battery.

9. Replay mode

9.1 After power is on and entering Preview state, press Power key continuously to shift to Replay mode.

Select the file to be replayed through the menu as follows:

Select CAR to replay files in car-carrying video mode;

Select VIDEO to replay files in general video mode;

Select JPG to replay files in shooting mode;

9.2 Introduction to play screens

9.2.1 Screens of video files

1. Icon of replay mode;

2. Indicate serial number of current file/ total number of files;

3. Indicate parameter of recording time;

4. Operation buttons hint icon

5. Indicate recording time point.

When a video file is being played, click Ok key to pause play, and click Menu key to stop playing.

9.2.2 Screen of photos

1. Indicate serial number of current file/ total number of files;

2. Operation buttons hint icon

In replaying, Press WIFI key to select other file type，in a circulating way.

10. Menu operation

There is a different menu in each working mode as shown in the following figures:

Men

video recordin

car-carr

mode Men

shootin

mode Men

settin

mode Men

for re

mode

Operation: Press Menu key, the menu for this mode will be displayed on the LCD. At this time, press Power

key to move the cursor leftward or rightward and select on the menu, and press WIFI key to move the cursor

upward or downward and select on the menu in a circulating way. Press OK key to confirm and press Menu key

to return or exit from menu mode.

Application of remote controller

1. Definition of keys of remote controller

Keys of remote controller are as shown

in the right figure:

2. Use of remote controller:

Using the remote controller, you can achieve functions of power on, video recording, shooting and power off

without operating on the camera. Just point the signal transmission port of the remote controller at IR signal

receiving lamp of the camera, and press corresponding keys to achieve functions of power on, video recording,

shooting and power off.

Power on/off key

Video recording key

Shooting key

Signal transmission port

Infrared remote control lamp

Connect device to HDTV:

Connect the video camera to an HDTV with a HD cable as shown in the following figure, display signals in the

camera will be output into the HDTV automatically, and you can browse HD videos and photos that are recorded

or taken in the HDTV.

Diagra

of connectio

Signal transmission

APP (forAndroid and iOS System)

I. How to Obtain the APP Installation Program

1. For the Android System, you can search “SYMAGIX2” in the Play Store to obtain corresponding installation

programs, and then you can install them according to the indicated steps or through scanning the

two-dimensional code.

2. For the IOS System, you can search “SYMAGIX2” in the APP Store to obtain corresponding installation

programs, and then you can install them according to the indicated steps or through scanning the

two-dimensional code.

II. Camera WIFI and System Applications

Android Applications

1. Please install the SYMAGIX2 application program (provided by the Supplier or the Internet) for the Android

mobile phone or tablet PC, and then the Display Screen will show the Icon ;

2. Insert a Storage Card into the Camera and then power it on. Press the WIFI key to conduct WIFI connection,

and the Screen of the Camera will show the WIFI signal Icon with the external screen revealing WIFI

Connecting.

3. Enable the WIFI function of the Android mobile phone or tablet PC, and try to find the AP Name WDV8000;

please conduct connection between them till the system reveals a successful connection;

Note：if you are conducting WIFI connection for the first time, please input the password: 1234567890.

4. Tap and enable the Application Program Icon on the Android mobile phone or tablet PC; you can

directly view the preview picture transmitted by the Camera (see the following picture), and then conduct

relevant operations.

1. Resolution

2. White Balance

3. Settin

(

Enter Settin

sMenu

)

4. Wi-Fi Si

nal Ico

5. Camera’s Batter

Status Ico

6. Ente

the Pla

bac

Mode

7. Shutter Button

8.Video Mode

9. Photo Mode

10. Timela

sMode

678910

IOS Applications

1. Please install the SYMAGIX2 application program (provided by the Supplier or the Internet) for the IOS

mobile phone or tablet PC, and then the Display Screen will show the Icon ;

2. Insert a Storage Card into the Camera and then power it on. Press the WIFI key to conduct WIFI connection,

and the Screen of the Camera will show the WIFI signal Icon with the external screen revealing WIFI

Connecting.

3. Enable the WIFI function of the IOS mobile phone or tablet PC, and try to find the AP Name

WDV6000SA_WIFI; please conduct connection between them till the system reveals a successful connection;

if you are conducting WIFI connection for the first time, please input the password: 1234567890.

4. Tap and enable the Application Program Icon on the IOS mobile phone or tablet PC; you can

directly view the preview picture transmitted by the Camera (see the following picture), and then conduct

relevant operations.

Notes:

1. If you need to record videos or download pictures using your mobile phone or tablet PC, please insert

one TF card for your camera;

2. When the Camera has been successfully connected with your mobile phone or tablet PC, the WIFI

Indicator Light will be on.

1. DV

atter

icon

2. Video resolution

3. White

alance

4. Setu

(

enter setu

)

5. Enter Pla

back mode

6. Timela

s Mode

7. Photo mode

8. Video mode

9. Shutter

utton

1234

5678

Application on PC

1. The camera has a plug-and-play function. Connect the power-on device to the computer with the USB cable,

and the mode can be automatically switched to the removable hard disk. Removable disk icon will appear in the

"My Computer" window. The pictures you shot stored in the removable disk I: \ jpg folder (I is this equipment

removable disk); video files your shot stored in I: \ video folder; vehicle-mounted files you shot saved in

I: \ CAR folder. Note: If using a mobile hard disk function on Windows 2000 or later versions of Windows

operating system, do not install the driver.

2. The default mode is removable disk when connecting the network video camera to the computer. When the

user wants to use the network video capabilities (PC CAM), press the shutter button once to switch to the camera

mode (the screen will display the word "PCCAM"). An icon will be produced in My Computer

“ ”, Double-click on this icon you can achieve real-time video capabilities, the user can use this device

for network video capabilities.

Note: In case of PCCAM, version 1 is XP sp3 or the above.

Technical Parameters

Image Sensor 8.0 Million Image Sensor

Function Modes Video recording mode, car-carrying mode, shooting mode and replay mode

Lens F2.8, f=2.5mm

LCD Dis

Screen 2.0 inch HD LCD Screen

Photo Definition Ratio 16M 、8M、5M 、4M

Video Definition Ratio 1440P 1920x1440(30fps)、 FHD：1920x1080(60fps ）、

FHD：1920x1080(30fps）、HD：1280x720（120fps）、HD：1280x720（60fps）

Stora

eMedia TF Car

(

32GB at most

)

File Formats Videos(MOV); H.264 Compressed Format;Photos(JPG)

USB Port USB 2.0 Port

Power Supply External 3.8V rechargeable lithium battery 1200mAh.

Language English、Simplified Chinese、Spanish、Portuguese、German、Italian、French、

Russian

Dimension 59x44x25.5mm

Label Statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

FCC Statement

changesormodificationsnotexpresslyapprovedbythepartyresponsiblefor

compliancecouldvoidtheuser’sauthoritytooperatetheequipment.



ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassB

digitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedto

providereasonableprotectionagainstharmfulinterferenceinaresidential

installation.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergy

and,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmful

interferencetoradiocommunications.However,thereisnoguaranteethat

interferencewillnotoccurinaparticularinstallation.

Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,

whichcanbedeterminedbyturningtheequipmentoffandon,theuseris

encouragedtotrytocorrecttheinterferencebyoneormoreofthefollowing

measures:

‐‐Reorientorrelocatethereceivingantenna.

‐‐Increasetheseparationbetweentheequipmentandreceiver.

‐‐Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthe

receiverisconnected.

‐‐Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

IC Notice:

This device complies with Canada Industry licence-exempt RSS standard(s). Operation is

subject to the following two conditions:

(1) this device may not cause interference; and

(2) this device must accept any interference. Including interference that may cause

undesired operation of the device.

Avis d’Industrie Canada

Le présent appareil est conforme aux CNR d'industrie Canada applicables aux appareils

radio exem pts de licence L'exploitation est autorisée aux deux conditions suivantes:

1) I'appareil ne doit pas produire de brouillage; et

2) I'utillsateur de I'appareil doit accepterbrouillage radioélectrique subi meme si le

brouillage est susceptible d'encompromettre le fonctionnement. mauvais fonctionnement

de I'appareil.

Monster Digital CAMVP1080 Wifi Camera User Manual

Monster Digital, Inc. Wifi Camera Users Manual

15_CAMVP-1080 UserMan,r1

Navigation menu

Namespaces

Views

Navigation