Monster 190070-00 Audio Bridge Transmitter User Manual 1900xx User1
Monster, LLC Audio Bridge Transmitter 1900xx User1
Monster >
User Manual
Monster Cable Products Inc. Wireless Ipod Audio System User guide Setup Instructions: The Monster model # 190070-00 Audio Bridge Transmitter is your own personal digital audio link between your Apple Ipod and your Home stereo system when equipped with the Monster model # 190069-00 Audio Bridge Receiver. 1. Plug the DC plug of the AC adapter to the DC input jack of the Audio Bridge Receiver. 2. Connect the stereo audio output jack of the Audio Bridge Receiver to the audio line input of your home entertainment system. 3. Plug the AC adapter to an AC outlet. 4. Plug the Audio Bridge Transmitter to the Apple Ipod. 5. Press the PLAY button on your Apple Ipod to initiate operation of the system. 6. Adjust the volume control of your home audio system to suit. 7. Note that an LED flashes on the transmitter unit while it is operating. For best results, keep within 30 feet operating distance between transmitter and receiver. * Apple Ipod is a registered Trademark of Apple Computer, Inc. Additional information is available at www.monstercable.com. Warranty does not include malfunction caused by accident, misuse, contact with solvent chemicals or malfunction caused by tampering or modification. This warranty excludes all incidental or consequential damages. Some states do not allow the exclusion or limitation of consequential damages so the above limitation may not apply to you. For Warranty Service, the product must be returned at your expense to place of purchase. Return policies may vary. If you cannot reasonably do this, please contact us stating the nature of the defect and date of purchase. Include a copy of your sales slip or proof of purchase. Your repaired or replacement equipment will be returned to you at our expense. This warranty gives you specific rights: you may also have other legal rights which vary from state to state. FCC Notice: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canadaâs website www.hc-sc.gc.ca/ Caution: changes or modifications not expressly approved by Monster Cable Products Inc. may void the users authority to operate this device. Note: This equipment has been tested and found to comply with the limits for a class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. Monster Cable Products, Inc. 455 Valley Drive Brisbane, CA 94005 Phone 415-840-2000 Audio Bridge Receiver FCC ID: RJE190069-00 IC: 5153A-19006900 Audio Bridge Transmitter FCC ID: RJE190070-00 IC: 5153A-19007000
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 1 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:34b62b5b-dfb1-482c-a58d-bc3c3bdd88e7 Producer : Acrobat Distiller 6.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2007:10:31 11:16:32-07:00 Create Date : 2007:10:31 11:16:32-07:00 Document ID : uuid:1a9933f6-0825-441e-9f4b-6e8a9410a322 Format : application/pdf Title : Microsoft Word - 1900xx_User1.doc Creator : Alex Samson Author : Alex SamsonEXIF Metadata provided by EXIF.tools