Monster 191324 Monster Blutooth Speaker User Manual AS200 Glow QSG Draft Drawing 170626

Monster, LLC Monster Blutooth Speaker AS200 Glow QSG Draft Drawing 170626

User Manual

Manual and Warranty ・ Manuel et GarantieProduct Overview• Speaker• USB cable• Lanyard• QSG & Warranty Letter1. Lanyard 2. 3.4. 3.5mm audio line in (AUX in)NFC sensor Reset Button5. Charge in6. MicrophoneSCAN FOR FULL MANUAL • SCAN POUR MANUEL COMPLET http://www.monsterproducts.com/support/product-manualsReset DeviceThere may be a malfunction, press the Reset Button to reset the speaker. Reset paired device listAfter Power On and no music playing, press Volume Up Button, Volume Down Button and MFB simultaneously for around 5 seconds.MusicYou can play and pause your music using the MFB Button. To perform this function short press the button. Some phones may require you to start a media player rst.Press and hold the Volume Up Button for 2 seconds for next song.Press and hold the Volume Down Button for 2 seconds for previous song.CallAnswer a Call: Press the MFB once.Reject a Call: Press and hold the MFB for about 2 seconds.End a Call: Press the MFB once.Volume ControlShort press Volume Up Button or Volume Down Button to turn volume up or down, you hear beep tone once you reach the maximum volume or minimum volume.Please read these safety instructions carefully to ensure your personal and property safety.Precautions• Do not drop, disassemble, deform, modify or insert any objects into this product as operating damage may result.• Do not attempt to repair, modify or disassemble the product yourself. This product does not contain any user-serviceable components and may void the warranty.• Do not clean the product with alcohol, ammonia based cleaners and abrasive cleaners.• Do not place this product on slanted surfaces as well as the edge of high surfaces, like shelves, during music play to prevent accidental falling.• Do not bring your product in to contact with any sharp objects as this may cause scratches and operating damage.• Do not attempt to replace the product battery, it is built-in and is not user changeable.• Observe all signs and displays that require an electrical device or RF radio • Dispose of the product and the product’s battery in accordance with local laws and regulations.• Do not dispose of the battery with regular household waste.FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates use and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by interference by one of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.the receiver is connected.• Consult the dealer or an experienced radio / TV technician for help.FCC NoticeThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that may cause undesired operation.FCC Cautionfor compliance could void the user‘s authority to operate this equipment.• This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.Industry Canada (IC) Compliance NoticeThis device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.7. Multi Function Button (MFB) (pairing, phone call answer/end/reject, music play/pause) 8. LED indicator (power on/pairing/battery low and charging status indicator) 9. Volume Down Button 10. Power On/Off Button11. Volume Up ButtonGuide to Indicator LightsCONDITION/MODEPower OnBluetooth pairing modeConnected Charging Volume UpVolume DownReset paired device list Blue & red LED ash a few timesBattery Low Red LED Battery low warning toneDESCRIPTIONBlue LED stays OnBlue LED OnBlue LED stays On, LED Off after charging//TONE/VOICE PROMPTSOpening tone“Goodbye”“Discovering”“We are connected” “Charging” Beep tone at maximum levelBeep tone at minimum levelDouble long low toneTo Power off the speaker, press and hold the Power On/Off Button for about 3 seconds again, you hear “Goodbye”.Power On mode, press and hold the Power On/Off Button for about 3 seconds to power on the speaker, you hear the opening tone• Noel’s letter62813 4 5 791110Bluetooth pairingIn Power On mode, press and hold the MFB for about 2 seconds until LED indicator ashes blue and red alternately, you hear “Discovering”. Now the device is inpairing mode. When you unbox the speaker and power it on for the rst time, it will enter to pairing mode automatically.2. Activate Bluetooth® on your phone and set it to search for new devices or tap your phone on the NFC sensor.Power/Charging Before using the speaker, you need to charge the battery and pair the speaker with a compatible device.The package includes a Micro USB cable that can be connected to your computer or other device made for USB charging. You can use a standard USB compatible charging device, or you can plug the USB cable directly into a laptop or PC.Caution: use 500mA or up, 5V DC output only power adapter.

Navigation menu