Monterey 46AK368R Wireless Keyboard User Manual

Monterey International Corporation Wireless Keyboard

User Manual

5 6 74receiver connect buttonreceiver connect button1. Package Contents:a. Keyboard. b. Mouse. c. Receiver Box.d. Software. e. Batteries.2. Install the Batteries:a. Mouse. b. Receiver. c. Keyboard3. Notice1 2 3QUICK GUIDEKeyboard & Mouse RF Comboc.b.AAx2d.c.a.e.AAx2 AAx2b.4. Installation:a. Turn off the computer. Connect the receiver cable to the PC via PS/2 ports.b. Place receiver away from electronic devices.8 in (20 cm)keyboard PS/2 (purple)mouse PS/2 (green)8 in (20 cm)System RequirementsTo use the mouse software and the hot keys on your multimedia keyboard, you need the following:· Windows XP/ME/2000/98SE/NT 4.0 or later· PS/2 mouse and keyboard ports· Sound Blaster compatible sound card (for CD/VCD/DVD, and MPEG operation)· CD-ROM drive (for software installation and CD/VCD operation)a.unlockAAx2PS/2 keyboard connector (purple)PS/2 mouse connector (green)Mouse/Keyboard connect button1. Place the RF receiver in a good location.2. Place the keyboard and the mouse in the proper location for your computer. Place the receiverat least 8 inches(20cm)from electrical devices such as the computer or monitor.Note! Repeat this Step when connecting the Wireless RFKeyboard & Mouse for the first time and after replacing the batteries. 5. ID Select 6. Installing Device Drivers7. TroubleshootingConnect switchesConnect switchesWireless RF Keyboard & Mouse not detectedIf the keyboard and mouse don't respond to activity, follow these steps:1. Ensure that the receiver cable is properly connected to the PS/2 mouse and keyboard ports . Ensure that the purple connector is connected to the keyboard port, and the green connector is connected to the mouse port.2. Ensure that the batteries have been installed correctly .3. Ensure that there are no IRQ or I/O address conflicts. Refer to your op-erating system user's manual for information on resolving IRQ and I/O address conflicts.(A)(B)ImportantImportant(A) ID connect for keyboard Press ID select switch on Receiver and then Keyboard within 10second.(B) ID connect for mouse Press ID select switch on Receiver and then Mouse within 10second.Shortcut keysScrollerLeft-click buttonConnect buttonRight-click button1.After you have installed and connected Desktop Wireless, insert the Installation CD into the CD-ROM drive. The CD supports Windows Autoplay and starts running automatically. If not, access the CD from Windows Explorer, and then click the relevant CD-ROM drive. Double click the Setup.exe file.2.Select the driver and applications that you want to install, and then click the OK button.3.Follow the onscreen instructions to complete the installation. IDIDIDIDIDIDIDIDIDTHIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.Federal Communications Commission RequirementsThe equipment has been tested and found to comply with thelimits for Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures:● Reorient of relocate the receiving antenna.● Increase the separation between the equipment and receiver.● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.● Consult the dealer or an experienced radio/TV technician for help.The changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate the equipment.

Navigation menu