User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 510946 |
| Application ID | 1EQHFKnjP2tTQofEBFvw1w== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 82.99kB (1037350 bits) |
| Date Submitted | 2005-01-31 00:00:00 |
| Date Available | 2005-01-31 00:00:00 |
| Creation Date | 2004-11-22 19:11:50 |
| Producing Software | Acrobat 5.0 Image Conversion Plug-in for Windows |
| Document Lastmod | 2004-11-22 20:31:21 |
| Document Title | User Manual |
| Document Creator | Acrobat 5.0 Image Conversion Plug-in for Windows |
QUICK GUIDE Keyboard & Mouse RF Combo Scoll Hotkeys ,|!.|fE]!UUUUUDUUDUTEI _l!le!l DUDE]. l.|lllllll.]|.lllllllllllllllllllllllllll-l llllll illllllll I .!1!|BJEJ|!JDEJEJ|!JEII!J|!J!1 DE] DEE). ,l-ll.llllllllll|llllllllllllll,lll|_l llllllllll I!J,LIJ_DIL,_JMLIJL!J [fly up. Scroller Left-click button Right-click button Connect button M8370 4. Installation: 1. Turn off the computer. Connect the receiver cable to the PC. There is two kinds of connectors as below ®The USB Pin-head is for keyboard and you can change it into PS/2 pin withattached PS/2 adapter. ®The green PS/Z Pin-head is for Mouse USE. l 1) Use only the usb 2) Use the usb+ps/2 3) Use the ps/2+ps/2 interface with an adaptor. 2. Turn on the computer and connect with Mouse and keyboard. Proceed ID select (Page 5) interface. interface. 1 . Package Contents: 1. Keyboard. 2. Mouse. illLll'lll'llllll'llllll'llllll'lll'lll'lllllll-I.lllfillllllilll, Q uuuuuuuuuuuuugminimum llll!llllllll!lllllll!llllllllllllll-i Milli-mill , . i-iL-JlluliiliuL-Julliliiul—i lllllllll 3. CD Driver. uLlJllJl—lLlJllJu ' 4. Receiver. 5. 038 to PS/2 6. Batteries 3 apter. & " I'1.5v AAx4 (Purple) System Requirements USB the CD-Driver for the mouse and hotkeys on your multimedia keyboard, you need the following: - Windows XP/ME/2000/98SE/NT 4.0 or later. . PS/2 mouse and keyboard ports. - Sound Blaster compatible sound card (for CD/VCD/DVD, and MPEG operation). - CD-ROM drive (for software installation and CD/VCD operation). 5. ID Select A Important (1) Corresponding ID connect for keyboard Press ID select switch on Receiver and then Keyboard within 10 second. (2) Corresponding ID connect for mouse Press ID select switch on Receiver and then Mouse within 10 second. Receiver Connect butto\, 1 Note! Repeat this Step when un-connecting the Wireless RF Keyboard & Mouse for the first time or after replacing the batteries. 2. Install the Batteries: 1. Keyboard. 6. Install Device Drivers 1. After you have installed and connected Wireless RF Keyboard & Mouse, insert the Installation CD into the CD-ROM drive. The CD supports Windows Autoplay and starts running automatically. If not, access the CD from Windows Explorer, and then click the relevant CD-ROM drive. Double click the Setup.exe file. 2. Select the driver and application that you want to install, and then click the OK button. 3. Follow the onscreen instructions to complete this installation. 7. Troubleshooting Wireless RF Keyboard & Mouse not detected If the Keyboard and mouse don't respond to activity, follw these steps: 1. Ensure that the receiver cable is properly connected to the PS/2 mouse and keyboard ports. Ensure that the purple connector is connected to the keyboard port, and the green connector is connected to the mouse port. 2. Ensure that the batteries have been installed correctly. 3. Ensure that there are no IRQ or I/O address conflicts. Refer to your operating system user's manual for information on resolving IRQ and I/O address conflicts. 3. Notice A Important 1. Place the RF receiver on a good location. Keep the receiver at least 8 inches(20cm) from electrical devices such as the computer or monitor. m a i X 2. Place the keyboard and the mouse on the proper location for your computer. and"?! w mun-mumnmu-u llJl Illlll L1 l neigisgigsggigemggi u! been! ; amusement!!! l!!! mu .; r wan-munwnuwgfil _I This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, Including interference that may cause undesired operation. Federal Communications Commission Requirements The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interterence by one or more of the following measures: 0 Reorient of relocate the receiving antenna. 0 Increase the separation between the equipment and receiver. 0 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 0 golnsult the dealer or an experienced radio/TV technician for e p. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. KM377R2D-USB/P82 Combo
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2004:11:22 20:31:21+08:00 Create Date : 2004:11:22 19:11:50+08:00 Creator : Acrobat 5.0 Image Conversion Plug-in for Windows Page Count : 1 Mod Date : 2004:11:22 20:31:21+08:00 Creation Date : 2004:11:22 19:11:50+08:00 Producer : Acrobat 5.0 Image Conversion Plug-in for Windows Metadata Date : 2004:11:22 20:31:21+08:00 Has XFA : NoEXIF Metadata provided by EXIF.tools