Monterey 46AK9300G RF Keyboard User Manual Keyboard

Download:
Mirror Download [FCC.gov]
Document ID	867836
Application ID	5vXeD+mA9Xz9VhvNVvJ7Uw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.09kB (26116 bits)
Date Submitted	2007-11-13 00:00:00
Date Available	2007-11-13 00:00:00
Creation Date	2007-10-31 15:47:26
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2007-11-12 14:52:45
Document Title	Microsoft Word - Keyboard_User Manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

RF keyboard/K9300G
Operation procedure
1.Insert two AAA batteries to the RF Keyboard , and close the battery cover.
2.Plug in the Receiver to the USB port of P.C.
3.Press the Connect button of RF Keyboard for pairing with the Receiver within
30Sec.
4.Access LED will go off and RF Keyboard is ready. If Access LED is still
blinking, please repeat the above procedure 1 to 3 again.
Federal Communication Commission Interference Statement
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Notice:
(1) A Unshielded-type power cord is required in order to meet FCC emission limits
and also to prevent interference to the nearby radio and television reception. It is
essential that only the supplied power cord by used.
(2) Use only shielded cables to connect I/O devices to this equipment.
(3) Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Channel
This equipment marketed in USA is restricted by firmware to only operate on 2.4G
channel 1-12.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2007:10:31 15:47:26+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2007:11:12 14:52:45+08:00
Metadata Date                   : 2007:11:12 14:52:45+08:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - Keyboard_User Manual.doc
Document ID                     : uuid:b3f74a50-8608-41e1-9b7a-2404cef1dc68
Instance ID                     : uuid:56b4031e-70f3-46e2-9ffa-6dc4e29f0e54
Page Count                      : 2
Author                          : Administrator

EXIF Metadata provided by EXIF.tools