Monterey 46AMS35 Wireless Mouse User Manual

Download:
Mirror Download [FCC.gov]
Document ID	325123
Application ID	NBT7p63HqCNovRFyvVVKhg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	32.56kB (407030 bits)
Date Submitted	2003-05-13 00:00:00
Date Available	2003-05-12 00:00:00
Creation Date	2003-04-30 14:08:59
Producing Software	Adobe PDF library 5.00
Document Lastmod	2003-05-07 10:59:50
Document Title	User Manual
Document Creator	Adobe Illustrator 10.0

QUICK GUIDE
Keyboard & Mouse RF Combo
1. Package Contents:
2. Install the Batteries:
a. Keyboard.
d. Software.
a. Mouse.
b. Mouse. c. Receiver Box.
e. Batteries.
a.
b.
a.
3. Notice
Important
1. Place the RF receiver in a good location.
b. Receiver. c. Keyboard
Place the receiver
at least 8 inches(20cm)
from electrical devices
such as the computer or monitor.
AAx2
Shortcut keys
unlock
c.
d.
ID
PS/2 mouse
connector (green)
e.
c.
AAx2
AAx2
ID
AAx2
Scroller
Right-click button
Left-click button
ID
Connect button
5. ID Select
a. Turn off the computer. Connect
the receiver cable to the PC
via PS/2 ports.
(A) ID connect for keyboard
Press ID select switch on Receiver and then Keyboard
within 10second.
connect button
b. Place receiver away from
electronic devices.
ID
ID
(B)
receiver
connect button
ID
Connect
switches
ID
ID
6. Installing Device Drivers
Important
(B) ID connect for mouse
Press ID select switch on Receiver and then Mouse
within 10second.
(A)
Connect switches
receiver
8 in (20 cm)
b.
4. Installation:
ID
2. Place the keyboard and the mouse in the
proper location for your computer.
Mouse/Keyboard
connect button
System Requirements
To use the mouse software and the hot keys on your multimedia keyboard,
you need the following:
· Windows XP/ME/2000/98SE/NT 4.0 or later
· PS/2 mouse and keyboard ports
· Sound Blaster compatible sound card (for CD/VCD/DVD, and MPEG operation)
· CD-ROM drive (for software installation and CD/VCD operation)
keyboard PS/2 (purple)
mouse PS/2 (green)
PS/2 keyboard
connector (purple)
1.After you have installed and connected Desktop Wireless,
insert the Installation CD into the CD-ROM drive.
The CD supports Windows Autoplay and starts running
automatically. If not, access the CD from Windows Explorer,
and then click the relevant CD-ROM drive. Double click the
Setup.exe file.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Federal Communications Commission Requirements
The equipment has been tested and found to comply with the
limits for Class B Digital Device, pursuant to part 15 of the FCC
2.Select the driver and applications that you want to install,
Rules. These limits are designed to provide reasonable protection
and then click the OK button.
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
3.Follow the onscreen instructions to complete the installation. energy and, if not installed and used in accordance with the
instruction, may cause harmful interference to radio
communication. However, there is no guarantee that interference
7. Troubleshooting
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
Wireless RF Keyboard & Mouse not detected
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
If the keyboard and mouse don't respond to activity,
the interference by one or more of the following measures:
follow these steps:
1. Ensure that the receiver cable is properly connected to the
PS/2 mouse and keyboard ports . Ensure that the purple
connector is connected to the keyboard port, and the green
connector is connected to the mouse port.
2. Ensure that the batteries have been installed correctly .
Note! Repeat this Step when connecting the Wireless RF
Keyboard & Mouse for the first time and after replacing
the batteries.
8 in (20 cm)
3. Ensure that there are no IRQ or I/O address conflicts.
Refer to your op-erating system user's manual for
information on resolving IRQ and I/O address conflicts.
●
●
●
●
Reorient of relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:05:07 10:59:50+08:00
Create Date                     : 2003:04:30 14:08:59+08:00
Creator                         : Adobe Illustrator 10.0
Creator Version                 : 10
Container Version               : 9
For                             : jay, jay
Title                           : D:\�����]�p\���������\KM363R2B-���窩.eps
Bounding Box                    : -101 135 715 664
Page Count                      : 1
Creation Date                   : 2003:04:30 14:08:59+08:00
Mod Date                        : 2003:05:07 10:59:50+08:00
Producer                        : Adobe PDF library 5.00
Creator Tool                    : Adobe Illustrator 10.0
Metadata Date                   : 2003:05:07 10:59:50+08:00

EXIF Metadata provided by EXIF.tools