Moppet MB3P Bluetooth Speaker User Manual MB3P V1 6
Moppet Enterprises Limited Bluetooth Speaker MB3P V1 6
Moppet >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3049723 |
| Application ID | lvK7ofC5CJFo3+blqq+sPw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 78.54kB (981688 bits) |
| Date Submitted | 2016-07-04 00:00:00 |
| Date Available | 2016-07-04 00:00:00 |
| Creation Date | 2016-06-21 09:40:19 |
| Producing Software | Adobe PDF library 11.00 |
| Document Lastmod | 2016-06-21 09:40:19 |
| Document Title | MB3P User Manual V1.6 |
| Document Creator | Adobe Illustrator CC 2014 (Macintosh) |
iCRW MB-3P User Manual Version: 1.6 Date: 20 Jun 2016 Safety Instruction: Plush with Bluetooth® Speaker User Manual Please read this user manual carefully before operating the appliance; and save it for further reference. Camera Shutter function: • When connected bluetooth, short press the • • /M button to switch • Do not use this device near water; clean only using a dry or slightly moist cloth. • The appliance shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed near the product. • Do not place speaker on any wet surface. • Do not cover the unit with any table-clothes, curtains, etc. Place the unit where there is good air circulation. • No naked flames sources, such as candles, should be placed near the product. • Press the player’s button gently. Pressing them too hard can damage the player. • Do not expose product to temperature above 35˚C; keep it out of direct sunlight. • This product has no user-serviceable parts. Do not attempt to repair this product yourself. • Do not subject the product to harsh impacts. Do not drop the appliance. This may result in damage to the product. • Do not place unit near TV, speakers, wireless telephones and other objects that generate strong magnetic fields. • When the unit is affected by a strong electromagnet field or by other interference simply turn off to reset the speakers, it will return to normal operation. 3. Close the velcro properly and enjoy your music with the plush. How to Charge the Speaker: Bluetooth® Wireless Speaker Buttons: ON / OFF / SWITCH MODE INDICATION LIGHT VOLUME DOWN / REWIND KEY RING VOLUME UP / SKIP PLAY / PAUSE SPEAKER COVER MICROPHONE RESET MICRO USB JACK Troubleshooting: ► ► Bluetooth Speaker and the Plush: Check whether the speaker is in power on and bluetooth is in searching mode. Check whether there are too many bluetooth receviers around. Turn them off to avoid any disturbance and pair again. 2. The sound is too low or distorted 1. There has a velcro on the rear side of the plush. ► ► Others: This bluetooth speaker has a key ring, you can bring it with you everywhere, and it can works as a stand. Check the volume setting on your device and adjust the volume to a suitable sound level. Check if the speaker is battery low, charge the speaker. 3. Cannot play music properly ► 2. Open the velcro and place the bluetooth speaker inside. Check whether the distance between the speaker and bluetooth device is too far from its working distance ( maximum 10M in outdoor operating space ) or whether there are some obstancles blocking the communication between the speaker and bluetooth device. 4. Speaker malfunction ► Press the “RESET” button by using a pin and restart the device. 5. Speaker play “bi bi” sound ► KEY RING SPEAKER STAND Bluetooth Pairing: • Press and hold the ON/OFF button ( • • • • • 1. Cannot pair successfully to camera shutter mode. ( with shutter sound indication ) Open the Camera application on your mobile phone. Press the to take photo. This speaker has built-in rechargeable battery, before the first use, the battery should be charged to ensure optimal performance and battery life. Pull the speaker cover gentlely, micro USB jack is under the cover. Charging the speaker for about 4 hours by connecting the speaker to the USB port of a PC which is powered on, alternately the speaker may be powered by a AC/DC wall charger (not included) with a 5V 500mA USB output. The red charging indication light will be “on” while it is charging, it turns off while fully charged. The battery is in low level, please charge the unit. /M ) for about 3 seconds to turn on the speaker. The blue color indication light will flash alternatively showing it is in bluetooth pairing mode. The speaker starts searching for bluetooth device. Turn on your bluetooth enabled music player device ( ie. iPod/iPhone, mobile phone or compatible device) to search this bluetooth speaker. Please refer to the device user manual to activate the bluetooth function and pairing procedures. Select to pair the “iCRW-MB3P” device from the bluetooth list. Once paired the blue indication light will be ON. Now you can play music from your bluetooth device to this bluetooth speaker. When it is not being used for a long period time, please turn off the speaker. FCC Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Play / Pause: • Press the to play or pause the song , press it again to pause or continue to play the song. Previous / Next Song: • Press the button ( ) once to select the song. Press the for the previous song, press for the next song. Volume Control: • Press and hold ( ) for a while to adjust the sound volume. Press to decrease sound volume; press to increase sound volume. Stop press while it reaches the desired sound level. Handsfree function: • This speaker has built-in microphone, it can be work as handsfree speaker after connnected mobile phone with bluetooth connection. • User can pick up the phone call by press the Play / Pause once. • Hang up the calling by press the Play / Pause button once again. • Keep press Play / Pause button for about 2 seconds to redial the last called phone number. ( not the call-in number ) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. BC The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Moppet Enterprises Limited is under license. Other trademarks and trade names are those of their respective owners.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.6-c011 79.156289, 2014/03/31-23:39:12 Format : application/pdf Title : MB3P User Manual V1.6 Metadata Date : 2016:06:21 09:40:19+08:00 Modify Date : 2016:06:21 09:40:19+08:00 Create Date : 2016:06:21 09:40:19+08:00 Creator Tool : Adobe Illustrator CC 2014 (Macintosh) Thumbnail Width : 256 Thumbnail Height : 164 Thumbnail Format : JPEG Thumbnail Image : (Binary data 14278 bytes, use -b option to extract) Instance ID : uuid:0f4d43b9-4bb2-8b40-8333-7a36225b467e Document ID : xmp.did:ee8eae4d-a36a-47c0-8c4f-3a01769378ec Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:1d926f83-1a52-4def-91a5-b379a15ef39a Derived From Document ID : xmp.did:1d926f83-1a52-4def-91a5-b379a15ef39a Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:B6D5C15BF4ACE4119F85923AB1789BE2, xmp.iid:ee8eae4d-a36a-47c0-8c4f-3a01769378ec History When : 2015:02:05 13:03:43+08:00, 2016:06:21 09:40:15+08:00 History Software Agent : Adobe Illustrator CS6 (Windows), Adobe Illustrator CC 2014 (Macintosh) History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : play pause.png, play pause.png, play pause.png, play pause.png, next.png, next.png, next.png, next.png, next.png, next.png, next.png, next.png, /Users/Sun_MacAir/Downloads/Bluetooth Brand Guides and Logos/Logos/Logos for Print Use/Bluetooth_CM_ColorBlack.eps, play pause.png Manifest Reference Document ID : xmp.did:05873f40-1a4b-d241-8eaa-3f9dd2177d28 Manifest Reference Instance ID : xmp.iid:05873f40-1a4b-d241-8eaa-3f9dd2177d28 Ingredients File Path : play pause.png, play pause.png, play pause.png, play pause.png, next.png, next.png, next.png, next.png, next.png, next.png, next.png, next.png, /Users/Sun_MacAir/Downloads/Bluetooth Brand Guides and Logos/Logos/Logos for Print Use/Bluetooth_CM_ColorBlack.eps, play pause.png Ingredients Document ID : xmp.did:05873f40-1a4b-d241-8eaa-3f9dd2177d28 Ingredients Instance ID : xmp.iid:05873f40-1a4b-d241-8eaa-3f9dd2177d28 Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 371.661258 Max Page Size H : 189.687094 Max Page Size Unit : Millimeters Font Name : ArialMT, Arial-BoldMT, FlorencesansSCBlack, MyriadPro-Regular, TimesNewRomanPSMT, TimesNewRomanPS-BoldMT Font Family : Arial, Arial, Florencesans SC Black, Myriad Pro, Times New Roman, Times New Roman Font Face : Regular, Bold, Regular, Regular, Regular, Bold Font Type : Open Type, Open Type, TrueType, Open Type, Open Type, Open Type Font Version : Version 5.06, Version 5.06, 1.0, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 5.05, Version 5.05 Font Composite : False, False, False, False, False, False Font File Name : Arial.ttf, Arial Bold.ttf, Florsn35.ttf, MyriadPro-Regular.otf, Times New Roman.ttf, Times New Roman Bold.ttf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants L : 65.882401 Swatch Groups Colorants A : -35 Swatch Groups Colorants B : -38 Swatch Groups Group Name : 明亮 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000000 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003100 Swatch Groups Colorants Black : 0.003100 Producer : Adobe PDF library 11.00 Page Count : 1 Creator : Adobe Illustrator(R) 17.0 For : Sun_Mac Air, Bounding Box : -119 -648 918 5 Container Version : 11 Creator Version : 18EXIF Metadata provided by EXIF.tools