Mossloo MSLM02Q Wireless Charging Pad User Manual

Shenzhen Mossloo Industrial Co.,Ltd Wireless Charging Pad

Contents

User Manual

1.a.b.c.*MADE IN CHINAINSTRUCTIONS:Charging Mobile Devices:Ensure that your phone or tablet supports wireless charging. It will be listed in the manufacturer’s specications. (See also the last page of this manual).Connect the wireless charging pad to a USB adapter with the provided cable. Once connected LED Indicator will glow RED.Place the enabled device on the surface of the wireless charging pad. The LED will turn GREEN to indicate that the phone is charging.Note: To charge devices, use only the accessory cable or the cable included with your own device by the manufacturer.WIRELESS CHARGING ENABLEDDEVICES:iPhone 8/8Plus/X, Samsung Galaxy S8/S8+/S7/S7 Edge/S6/S6 Edge, Nokia Lumia 1020/920/928, HTC 8X, HTC Droid DNA, HTC Rzound, HTC Incredibly 4G LTE, Moto Droid Turbo, Motorola Moto 360 Smart Watch, Moto Droid Maxx, Droid Mini, Google Nexus 6/4/5/7 (2013), LG D1L, LG LTE2, LG G2 (Verizon), Blackberry Z30 (Verizon)Rustic Wireless Charging PadInstruction ManualSM-28041 x Wireless Charging Pad1 x USB to Micro-USB Cable1 x Instruction ManualInput power: 5V/1.5AOutput power: 5V/1A1.2.3.••Charging Pad SurfaceLED IndicatorMicro-USB Input PortWhat’s included:Features:Tech SpecicationsDo not use on an aircraft or in a hospital.To reduce the risk of injury, close supervision is necessary when the product is used near children.Do not expose the device to any moisture.Do not use the device in excess of its output rating. Overloaded outputs above rating may result in a risk of re or injury.Do not use the device if damaged or modied. Damaged or modied device may exhibit unpredictable behavior resulting in re, explosion or risk of injury.Do not disassemble the device. Take it to a qualied service person when service or repair is required. Incorrect reassembly may result in a risk of re or injury.Do not expose the device to re or excessive temperature. Exposure to extreme heat may cause explosion. 1.2.3.4.5.6.7.8.9.10.***Have servicing performed by a qualied repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.This device is not a toy.Do not overcharge Phone. Unit may get hot with excessive use. Remove Phone when it is fully charged. Never charge for more than 7 hours at a time.KEEP OUT OF REACH OF CHILDREN***SAFETY PRECAUTIONS:Read all the instructions before using the product.
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving an　tenna. Increase the separation between the equipment and receiver.　 Connect the equipment into an outlet on a circuit different from that to which the 　receiver is connected. Consult the dealer or an experienced radio/TV technician for help.　 FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Navigation menu