Mossloo MSLM02Q Wireless Charging Pad User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3917282
Application ID	5O8WpmDW2vTvB5dJ87bcfQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	19.54kB (244308 bits)
Date Submitted	2018-07-09 00:00:00
Date Available	2018-07-09 00:00:00
Creation Date	2018-06-15 16:55:16
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-06-26 16:52:03
Document Title	User Manual
Document Creator	Adobe InDesign CC 13.1 (Windows)

Rustic Wireless
Charging Pad
Instruction Manual
SM-2804
INSTRUCTIONS:
1. Charging Mobile Devices:
a. Ensure that your phone or tablet supports
wireless charging. It will be listed in the
manufacturer’s specifications. (See also
the last page of this manual).
b. Connect the wireless charging pad to a
USB adapter with the provided cable. Once
connected LED Indicator will glow RED.
c. Place the enabled device on the surface
of the wireless charging pad. The LED will
turn GREEN to indicate that the phone
is charging.
* Note: To charge devices, use only the
accessory cable or the cable included with
your own device by the manufacturer.
SAFETY PRECAUTIONS:
Features:
1. Charging Pad Surface
2. LED Indicator
3. Micro-USB Input Port
What’s included:
1 x Wireless Charging Pad
1 x USB to Micro-USB Cable
1 x Instruction Manual
Tech Specifications
•
•
Input power: 5V/1.5A
Output power: 5V/1A
Read all the instructions before using the
product.
1. Do not use on an aircraft or in a hospital.
2. To reduce the risk of injury, close
supervision is necessary when the product
is used near children.
3. Do not expose the device to any moisture.
4. Do not use the device in excess of its
output rating. Overloaded outputs above
rating may result in a risk of fire or injury.
5. Do not use the device if damaged or
modified. Damaged or modified device may
exhibit unpredictable behavior resulting in
fire, explosion or risk of injury.
6. Do not disassemble the device. Take it to
a qualified service person when service
or repair is required. Incorrect reassembly
may result in a risk of fire or injury.
7. Do not expose the device to fire or
excessive temperature. Exposure to
extreme heat may cause explosion.
8. Have servicing performed by a qualified
repair person using only identical
replacement parts. This will ensure that
the safety of the product is maintained.
9. This device is not a toy.
10. Do not overcharge Phone. Unit may get
hot with excessive use. Remove Phone
when it is fully charged. Never charge for
more than 7 hours at a time.
*** KEEP OUT OF REACH OF CHILDREN***
WIRELESS CHARGING ENABLED
DEVICES:
iPhone 8/8Plus/X, Samsung Galaxy S8/
S8+/S7/S7 Edge/S6/S6 Edge, Nokia Lumia
1020/920/928, HTC 8X, HTC Droid DNA, HTC
Rzound, HTC Incredibly 4G LTE, Moto Droid
Turbo, Motorola Moto 360 Smart Watch, Moto
Droid Maxx, Droid Mini, Google Nexus 6/4/5/7
(2013), LG D1L, LG LTE2, LG G2 (Verizon),
Blackberry Z30 (Verizon)
MADE IN CHINA
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Has XFA                         : No
Language                        : ÖÐÐÔ
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Create Date                     : 2018:06:15 16:55:16+08:00
Metadata Date                   : 2018:06:26 16:52:03+08:00
Modify Date                     : 2018:06:26 16:52:03+08:00
Creator Tool                    : Adobe InDesign CC 13.1 (Windows)
Instance ID                     : uuid:16a19099-5001-46d2-98e6-b1e241594815
Original Document ID            : xmp.did:cb5e3d22-77e4-4819-8b4c-7b5f70789d97
Document ID                     : xmp.id:c3252a26-253a-4140-8a97-1880f5dd197b
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:7af2d1ab-5eb8-7d44-ab33-824dc6d05abb
Derived From Document ID        : xmp.did:9004c7da-31de-4a19-abbd-88271cb7d7ec
Derived From Original Document ID: xmp.did:cb5e3d22-77e4-4819-8b4c-7b5f70789d97
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 13.1 (Windows)
History Changed                 : /
History When                    : 2018:06:15 16:55:16+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CC 13.1 (Windows)

EXIF Metadata provided by EXIF.tools