Mossloo XJ0809 Bluetooth Speaker User Manual
Shenzhen Mossloo Industrial Co.,Ltd Bluetooth Speaker
Mossloo >
User Manual
Bluetooth Speaker
Instruction Manual
What’s included:
1 x Bluetooth Speaker
1 x 80cm black USB to Micro-USB charging cable
1 x Instruction Manual
Tech Specifications:
Output Power: 3W
Frequency Response: 200Hz - 20KHZ
Input voltage: 5V/1A
Battery Capacity: 350mAh
Playback time (max vol): 1.5-2 Hours
Battery Charging Time: 1.5-2 hours
LED indicator
Charging: Red LED on
Fully Charged: Red LED of
Pairing Mode: Blue LED flashes quickly
Connected: Blue LED flashes slowly
WARNING-When using this product,
basic
precautions should always be followed:
1. Read all the instructions before use.
2. Never store or use this product in
temperatures below 32°F(0°C) or above
115°F(45°C).
3. The unit’s full performance is achieved
only after 2 or 3 completed charge and
discharge cycles.
4. To reduce the risk of injury, close
supervision is necessary when the
product
is used near children.
5. Do not expose the device to moisture.
6. Do not use the device in excess of its
output rating. Overload outputs above
rating may result in a risk of fire or injury.
7. Do not use the device if damaged or
modified.
8. Damaged or modified batteries may
exhibit unpredictable behavior resulting
in fire,explosion or risk of injury.
9. Do not disassemble the device. For
repairs, seek a qualified service
professional. Incorrect reassembly may
result in a risk of fire or injury.
10. Do not expose the device to fire or
excessive temperature. Exposure to fire
or temperatures above 104°F may cause
explosion.
11. Ensure that qualified service
professionals
use only identical replacement parts to
ensure product safety
FCC WARNING
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two
conditions: (1) this device may not cause
harmful interference, and (2) this device
must accept
any interference received, including
interference that may cause undesired
operation.
Any changes or modifications not
expressly approved by the party
responsible for compliance
could void the user's authority to operate
the equipment.
NOTE: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation.If this equipment does cause
harmful interference to radio or television
reception,which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
-- Reorient or relocate the receiving
antenna.
-- Increase the separation between the
equipment and receiver.
-- Connect the equipment into an outlet
on a circuit different
from that to which the receiver is
connected.
-- Consult the dealer or an experienced
radio/TV technician for help.
To maintain compliance with FCC’s RF
Exposure guidelines, This equipment
should be
installed and operated with minimum
20cm distance between the radiator your
body: Use
only the supplied antenna.
Made In China