Motic China Group MOTICAMT Moticam T User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2180075
Application ID	kdShn/+F8w3sOwkLU5OgPA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.33kB (291632 bits)
Date Submitted	2014-01-28 00:00:00
Date Available	2014-01-28 00:00:00
Creation Date	2017-10-24 03:13:02
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-24 03:13:02
Document Title	Users Manual
Document Creator	Adobe InDesign CS5 (7.0)

Quick Assembly
Assembly
Quick
Moticam T
Parts
A Moticam T
D Eyepiece Adapter (2)
G Calibration Slide
B Dust Cap
E C-Ring
H Macro Tube
C Focusable Lens
F USB Cable and Charger
I Moticam Images Plus
Thank you for purchasing this Moticam. This camera is a delicate instrument and should be
handled with care. When not in use, please store the camera in a safe place with the dust
cap attached. Do not let the camera get in contact with water or expose it to extreme
temperatures (below 0 or above 50 degrees Celsius). In order to receive the highest level of
service, please retain your receipt as proof of purchase and register your camera online at
www.motic.com today.
Should you have any questions please do not hesitate to contact our customer service.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment
NOTE: This equipment has been tested and found to comply
with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The antenna(s) used for this device must be installed to provide a separation distance of
at least 20 cm from all persons and must not be co-located or operating in conjunction with
any other antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-cocated or operating in conjuction with any other antenna or trasmitter.
application CD
Date: 21.01.2014
Connect to the Moticam T WiFi signal
1. Each Moticam T transmits its own WiFi signal to which you can directly connect your
WiFi Device.
1. Normal USB Port: Users can
use their USB devices using this
port like USB Disk, USB Mouse
and others.
2. The Moticam T’s SSID signal name is printed on a label on the camera. To log into your
camera, simply connect your WiFi device to that signal. The password for the network by
default is 12345678.
Using a Wifi device that operates with Android or iOS
2. Min USB Port: User can
connect their PC and MoticamT
camera using this mini USB port.
* For best performance, we recommend to use WiFi devices, such as tablets, with a screen
not smaller than 8 inches. For iOS devices we suggest using iOS 5 or higher while for
Android Devices we suggest using Version 4.0 or higher.
1. To operate and use the camera on your tablet, please download our free App called
MotiConnect. For iPad you can find this on AppStore, for Android devices you can find
this on Google Play.
Using the camera on an eyepiece
1. Install the Motic Images Plus application program from the CD included.
2. Remove the Dust Cap (B) from the camera (A) and attach the focusable lens (C).
3. Choose the right size eyepiece adapter (D) and attach this to the focusable lens.
4. Attach this assembly to your microscope’s eyepiece by tightening the centering screws
on the eyepiece adapter.
5. Connect power supply to the camera. The blue light will turn solid when the camera is
in operation.
6. Connect to the Moticam T WiFi signal. Please see the instructions as below.
Using the camera on a Trinocular Microscope
1. Install the Motic Images Plus application program from the CD included.
2. You can also use certain web browsers such as Chrome, Firefox or Safari to view,
measure and capture without the need of the App. To view the camera stream on your
browser, please type in the IP number also shown on the label on the camera. For
example 192.168.1.151. On your browser, type 192.168.1.151:8080 and you will be
connected straight to the camera.
Use the Moticam T on your Wifi enabled computer
The Moticam T can also be used with Motic Images Plus software for Windows computers. If
you have a WiFi enabled laptop, you can install Motic Images Plus from the CD provided. To
view the camera in our product’s MI Devices interface, simply log your computer onto the
Moticam T’s WiFi signal, by selecting this Wifi connection and entering the password. Then
open the MI Devices interface by clicking on the camera icon within Motic Images Plus and
select Moticam T from the drop down menu. Then click on Open.
2. Remove the Dust Cap (B) from the camera (A) and attach the microscope’s C-Mount
adapter (*Please note that the C-Mount adapter is specific to your microscope. For
Motic microscopes, please consult the relevant Motic Accessory list and choose an
appropriate adapter for your Moticam. Depending on the type of adapter and micro
scope, the C-Ring (E) may be necessary between the camera and the C-mount
adapter).
3. Connect power supply to the camera. The blue light will turn solid when the camera is
in operation.
4. Connect to the Moticam T WiFi signal. Please see the instructions as below.
http://www.motic.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Create Date                     : 2014:01:21 14:37:03+08:00
Creator                         : Adobe InDesign CS5 (7.0)
Modify Date                     : 2014:01:27 14:50:24-08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2014:01:27 14:50:24-08:00
Creator Tool                    : Adobe InDesign CS5 (7.0)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 11830 bytes, use -b option to extract), (Binary data 12324 bytes, use -b option to extract)
Instance ID                     : uuid:b35c9774-15de-4a08-ab0b-1dac6760d5b4
Document ID                     : xmp.did:08C02031132FE3119DEAB6806F4593B2
Original Document ID            : xmp.did:08C02031132FE3119DEAB6806F4593B2
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:08C02031132FE3119DEAB6806F4593B2, xmp.iid:0BC02031132FE3119DEAB6806F4593B2, xmp.iid:0CC02031132FE3119DEAB6806F4593B2, xmp.iid:E7F919D38B5DE311B973F708D67BB14A, xmp.iid:D9616B2ECC7CE3118335E604FBD802DF, xmp.iid:DA616B2ECC7CE3118335E604FBD802DF, xmp.iid:DB3D8C91E17CE311B85EB687B527A582, xmp.iid:77A1AA636682E3119979FE57F9051369
History When                    : 2013:10:07 13:42:02+08:00, 2013:10:07 13:43:40+08:00, 2013:10:07 13:43:40+08:00, 2013:12:05 17:01:27+08:00, 2014:01:14 11:30:14+08:00, 2014:01:14 11:30:38+08:00, 2014:01:14 14:03:20+08:00, 2014:01:21 14:36:42+08:00
History Software Agent          : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0
History Changed                 : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata
Doc Change Count                : 1
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Count                      : 2

EXIF Metadata provided by EXIF.tools