Motorola Mobility A56AJ1 800 / 1900 MHz Dual Band Linear RF Compensator User Manual
Motorola Mobility LLC 800 / 1900 MHz Dual Band Linear RF Compensator
Contents
- 1. users manual
- 2. Antenna installation instruction
- 3. Exhibit D Users Manual per 2 1033 c3
Exhibit D Users Manual per 2 1033 c3
MOTOROLA, INC. FCC ID: IHDA56AJ1
Page 1 of 2
800 / 1900 MHZ DUAL BAND LINEAR RF COMPENSATOR
MODEL # SYN8486A
USER MANUAL
1. OVERVIEW
The 800 / 1900 MHz Dual Band Linear RF Compensator is a bi-directional, dual band RF
amplifier used in conjunction with either a dual band or a standard single band mobile phone. It
compensates for signal attenuation in both transmit and receive paths due to antenna and cable
losses employed in automotive OEM installations. This will help to improve call quality in weak
coverage areas and reduce dropped calls in between cell sites. The compensator operates in both
analog and digital modes.
2. ANTENNA INSTALLATION
To meet the FCC’s and IC’s RF Exposure Guidelines, the antenna should be installed so there is
at least 20 cm of separation between the body of the user or nearby persons and the antenna.
All installations are done at the factory. There is no end-user installation is involved. Any
unauthorized changes or modifications not expressly approved by the party responsible for
compliance could void user’s authority to operate this equipment.
3. I/O CONNECTION
Portable and antenna port: mini UHF type connectors.
DC input and various control signals: 14-pin connector.
4. SPECIFICATIONS
FCC ID IHDA56AJ1
FCC Rule Parts 22 & 24
IC Certification Number 10931128A
IC Radio Standards Specification RSS-131
Model Number SYN8486A
Operating Frequency TX: 824-849 MHz
1850-1910 MHz
RX: 869-894 MHz
1930-1990 MHz
Channeling Single channel
Mode of Transmission Analog & Digital
Data Source External
MOTOROLA, INC. FCC ID: IHDA56AJ1
Page 2 of 2
Type of Modulation AMPS (analog)
CDMA (digital)
GSM (digital)
TDMA (digital)
Type of Information Telephony & Data
Occupied Bandwidth Requirement AMPS: 30 KHz
CDMA: 1.23 MHz
GSM: 300 KHz
TDMA: 30 KHz
Input Power TX: 25 dBm max
Output Power TX: 27 dBm
Nominal Gain Cellular: TX: 824-849 MHz: 9 dBm
PCS: TX: 1850-1910 MHz: 15 dBm
Harmonics & Spurious FCC, IC & TIA / EIA specifications
Stability Any RF load condition
DC Supply Voltage 9 to 16.5 V
Current Draw 1.5A max
RF Load VSWR Full power at better than 2:1 VSWR
Operating Temp: -30 to 60°C
Storage Temp -40 to 90°C