Motorola Mobility A56CK1 800/1900 MHz Dual-Band Linear RF Compensator User Manual

Motorola Mobility LLC 800/1900 MHz Dual-Band Linear RF Compensator

Exhibit D Users Manual per 2 1033 c3

MOTOROLA, INC.    FCC ID: IHDA56CK1 Page 1 of 3 800 / 1900 MHZ DUAL BAND LINEAR RF COMPENSATOR MODEL # SYN9528A USER MANUAL  1. GENERAL   The 800 / 1900 MHz Dual Band Linear RF Compensator model # SYN9528A is a bi-directional, dual band RF amplifier used in conjunction with either a dual band or a standard single band mobile phone.  It’s designed to compensate for signal attenuation in both transmit and receive paths due to antenna and cable losses employed in automotive OEM installations.  This helps improving call quality in weak coverage areas and reduce dropped calls in between cell sites. The compensator operates in both analog (AMPS) and digital (CDMA, GSM, TDMA) modes.   2. INSTALLATION  To meet the FCC’s and IC’s RF Exposure Guidelines, the antenna should be installed so there is at least 20 cm of separation between the body of the user or nearby persons and the antenna.    WARNING  All installations are done at the factory.  No end-user installation or accessible part is involved.  Any unauthorized changes or modifications not expressly approved by the party responsible for compliance could void user’s authority to operate this equipment.    3. I/O CONNECTION  PORTABLE and ANTENNA port: FAKRA RF type connectors.  DC input and ON/OFF control: 4-pin automotive connector.  4. SPECIFICATIONS  FCC ID  IHDA56CK1  FCC Rule Parts  22 & 24  IC Certification Number  1090-SYN9528  IC Radio Standards Specification  RSS-131  Emission Designators  DXW, F1D, F9W and GXW  Operating Frequency  TX: 824-849 MHz                         1850-1910 MHz     RX: 869-894 MHz            1930-1990 MHz    Mode of Transmission  Analog & Digital   Data Source  External
MOTOROLA, INC.    FCC ID: IHDA56CK1 Page 2 of 3     Type of Modulation  AMPS (analog)     CDMA, GSM & TDMA (digital)       Type of Information  Telephony & Data   Channeling  Single channel    Channel Spacing  AMPS: 30 KHz     CDMA: 1.23 MHz     GSM:  300 KHz     TDMA: 30 KHz    Input Power  TX: 25 dBm max (800 MHz)            20 dBm max (1900 MHz)       Output Power  TX:  AMPS: 27 dBm       CDMA: 27 dBm       TDMA: 27 dBm       GSM: 800 MHz: 29 dBm               1900 MHz: 30 dBm     Nominal Gain  Cellular: TX: 824-849 MHz: 9 dBm       RX: 869-894 MHz: 7.5 dBm     PCS: TX: 1850-1910 MHz: 15 dBm           RX: 1930-1990 MHz: 15 dBm         Input and Output Impedance  50 Ohm    Harmonics & Spurious  IC, FCC, TIA / EIA specifications     Stability  Any RF load condition    DC Supply Voltage   9 to 16.5 V     Current Draw  1.5A max       RF Load VSWR  Full power at better than 2:1 VSWR     Operating Temp:    -30 to 60°C    Storage Temp  -40 to 90°C
MOTOROLA, INC.    FCC ID: IHDA56CK1 Page 3 of 3

Navigation menu