Motorola Mobility A5ZK1 800MHz Linear RF Compensator User Manual Referencesheetab
Motorola Mobility LLC 800MHz Linear RF Compensator Referencesheetab
Contents
- 1. Users manual
- 2. Exhibit 8 Users Manual
- 3. 800 MHz Linear RF Compensator Reference sheet
- 4. Update to Reference sheet to expand 20 cm distance to persons
- 5. Reference sheet update changes OR to AND
800 MHz Linear RF Compensator Reference sheet
MOTOROLA, INC. FCC ID: IHDA5ZK1
PAGE 1 OF 2
800MHZ LINEAR RF COMPENSATOR
MODEL # SYN8015A
REFERENCE SHEET
1. GENERAL
The 800 MHz Linear RF Compensator is a bi-directional RF amplifier. It is used to
compensate for signal attenuation in cellular phones due to antenna and cable losses.
The device operates in both analog (AMPS) and digital (CDMA & TDMA) modes.
2. ANTENNA INSTALLATION
IMPORTANT:
To meet the FCC’s RF Exposure Guidelines, the antenna
should be installed so there is at least 20 cm of separation
between the occupants of the vehicle and the antenna.
3. I/O CONNECTION
Portable and antenna port: mini UHF type connectors.
DC input and various control signals: 14-pin male connector.
4. SPECIFICATIONS
Operating Frequency TX: 824-849 MHz
RX: 869-894 MHz
Channeling Single channel
Mode of Transmission Analog & Digital
Data Source External
Type of Modulation AMPS (analog)
CDMA (digital)
TDMA (digital)
Type of Information Telephony & Data
Occupied Bandwidth Requirement AMPS: 30 kHz
CDMA: 1.23 MHz
TDMA: 30 kHz
Input Power TX: 25 dBm max
RX: 3 dBm max
Output Power TX: AMPS: 28 dBm
CDMA: 29.5 dBm
TDMA: 31.2 dBm
RX: 7 dBm
MOTOROLA, INC. FCC ID: IHDA5ZK1
PAGE 2 OF 2
Harmonics & Spurious FCC, TIA / EIA specifications
Stability Less than 3:1 VSWR into 50 Ohm
DC Supply Voltage 9 to 16.5 V
Current Draw 1.5A max
RF Load VSWR Full power at better than 2:1 VSWR
Operating Temp: -30 to 60°C
Storage Temp -40 to 90°C