Motorola Mobility P56HJ1 I365/I365IS IDEN, MOTOTALK TRANSCEIVER WITH BLUTOOTH User Manual Exhibit 12

Motorola Mobility LLC I365/I365IS IDEN, MOTOTALK TRANSCEIVER WITH BLUTOOTH Exhibit 12

USERS MANUAL

FCC Filing Package for Motorola i365/i365IS Transceiver FCC ID: IHDP56HJ1 iDEN, Motorola Inc., 600 North US Hwy 45, Libertyville, IL 60048, USA WWW.MOT.COM/iDEN Exhibit 8: Draft User’s Manual -- 47 CFR 2.1033(b)(3) The attached User’s Manual is a draft version, but sufficiently captures the essentials of device operation. Selected portions of the User Guide can be found as indicated below: 8.1 Part 15B Declaration of Conformity: Page 6 8.2 Safety Section: Page 99 8.3 Specific Absorption Rate (SAR) Data: Page 106
User’s Guidei365
IMPORTANT NOTICE: PLEASE READ PRIOR TO USING YOUR PHONEThe SIM card provided in this kit is intended for use with the phone provided in this package. Loss of certain features will result when using a SIM card from one of the following models: i30sx, i35s, i50sx, i55sr, i58s, i60c, i80s, i85s, i88s, i90c, i95cl series, and the i2000 series.For more information on SIM card compatibility, go to www.motorola.com/iden.Defects or damage to your Motorola phone that result from the use of non-Motorola branded or certified Accessories, including but not limited to replacement housings and or other peripheral accessories, are excluded from warranty coverage. Please refer to the text of Motorola's Limited One Year warranty located in this user’s guide for complete details.
DECLARATION OF CONFORMITYPer FCC CFR 47 Part 2 Section 2.1077(a)Responsible Party Name: Motorola, Inc.Address: 8000 West Sunrise BoulevardPlantation, FL 33322 USAPhone Number: 1 (800) 453-0920Hereby declares that the product:Product Name: i365 (i365IS)Model Number: H01XAN6JR5AN (i365)H01XAN6JR6AN (i365IS)Conforms to the following regulations:FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a)Class B Digital DeviceAs a personal computer peripheral, this device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.
1HELLOMOTOIntroducing your new Motorola i365 wireless phone. Here’s a quick anatomy lesson.PTT Button Audio JackVolume KeysLeft Soft KeyPerform function in lower left display.Talk KeyMake &answer calls.Menu KeyFrom home screen,open main menu.4-Way Navigation KeyRight Soft KeyPerform function in lower right display.Home/End KeyEnd calls, exit menu system.Power KeyOK KeyIn menus & lists, press to select hi hli h d iStatus IndicatorMicrophoneSpeakerSpeaker On/OffKeySmart KeyEarpiece
2check it outHome ScreenMain MenuMore ExitMain MenuTuLD0glP12Press the O keyto open theSettings screen 1Press and hold the Power Keyfor a few seconds, or until the screen lights up, to turn on your phone. 3up, down, left or right ( )Press the Navigation key to highlight a menu feature.4Press the O keyto select.
3Motorola, Inc.Consumer Advocacy Office1307 East Algonquin RoadSchaumburg, IL 60196www.hellomoto.comNote: Do not ship your phone to the above address. If you need to return your phone for repairs, replacement, or warranty service, please contact the Motorola Customer Support Center at:1-800-453-0920 (United States)1-877-483-2840 (TTY/TDD United States for hearing impaired)Certain mobile phone features are dependent on the capabilities and settings of your service provider’s network. Additionally, certain features may not be activated by your service provider, and/or the provider's network settings may limit the feature’s functionality. Always contact your service provider about feature availability and functionality. All features, functionality, and other product specifications, as well as the information contained in this user's guide are based upon the latest available information and are believed to be accurate at the time of printing. Motorola reserves the right to change or modify any information or specifications without notice or obligation.MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. Java and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries.© Motorola, Inc., 2008.Manual Number: NNTN7432AElectrical Requirements:Lithium Ion Battery 3.7VPower Adapter: 100-240V ~ 50-60Hz, 0.15AOutput of the Adapter: 5V 850mA
4
5contentscontentscheck it out . . . . . . . . . . . 2menu map. . . . . . . . . . . . 7Use and Care . . . . . . . . . 9essentials . . . . . . . . . . . 10about this guide . . . . . 10SIM card. . . . . . . . . . . . 11battery . . . . . . . . . . . . . 11turn it on & off . . . . . . 15enable security . . . . . . 15make a phone call. . . . 16answer a phone call . . 16make a private call . . . 16answer a private call. . 17store a phone number or private ID . . . . . . . . 18call a stored phone number or private ID . 19your phone number and Private ID . . . . . . . 20text messages . . . . . . 20manage memory . . . . 23using your handset as a modem . . . . . . . . 24main attractions . . . . . . 26PTV features. . . . . . . . 26one touch PTT . . . . . . 33PT manager . . . . . . . . 35MMS . . . . . . . . . . . . . 36bluetooth® . . . . . . . . . 49advanced features . . . 53basics. . . . . . . . . . . . . . . 59display . . . . . . . . . . . . 59main menu . . . . . . . . . 60text entry . . . . . . . . . . 60navigation key. . . . . . . 63handsfree speaker . . . 63transmitters . . . . . . . . 63use GPS with map software . . . . . . . . . . . 64calls . . . . . . . . . . . . . . . . 67turn off a call alert. . . . 67recent calls . . . . . . . . . 67redial. . . . . . . . . . . . . . 68caller ID . . . . . . . . . . . 68call forward. . . . . . . . . 68voice names . . . . . . . . 69emergency calls . . . . . 69international calls . . . . 70speed dial . . . . . . . . . . 71voicemail. . . . . . . . . . . 72selective dynamic group (SDG) calls . . . . 72
6contentscustomize. . . . . . . . . . . . 79ring tones . . . . . . . . . . 79wallpaper . . . . . . . . . . . 80datebook . . . . . . . . . . . 81hide or show location information . . . . . . . . . 81other features . . . . . . . . 84advanced calling . . . . . 84contacts. . . . . . . . . . . . 85datebook . . . . . . . . . . . 85GPS . . . . . . . . . . . . . . . 86handsfree . . . . . . . . . . 87pc applications. . . . . . . 88personalize . . . . . . . . . 88TTY . . . . . . . . . . . . . . . 88security . . . . . . . . . . . . 89Safety and General Information . . . . . . . . . . 92Service & Repairs . . . . . 98Specific Absorption Rate Data . . . . . . . . . . . . 99Limited Warranty Motorola Communications Products (International) . . . . . . . 101Information From the World Health Organization . . . . . . . . 105Patent and Trademark Information . . . . . . . . . 107Privacy and Data Security . . . . . . . . . . . . 108Smart Practices While Driving. . . . . . . . 109index. . . . . . . . . . . . . . . 111
7menu mapmenu mapmain menu1NetLJava Apps• Java SystemuSettings• (see next page)0VoiceRecord• [New VoiceRec]AContacts• [New Contact]•[New SDG List]EMessages• [Create Message]• [Create Txt Msg]• [Creat MMS Msg]•Voice Mail• Inbox•Drafts• Outbox• Fax Mail• Net AlertPCall ForwardDDatebooklMemoMCall Timers• Last Call• Phone Reset• Phone Lifetime•Prvt/Grp Reset• Prvt/Grp Life• Circuit Reset• Circuit Lifetime• Kbytes ResetBRecent CallsKShortcuts•[New Entry]• 1)Shortcuts• 2)Cntcs[New Contact]• 3)Recent Calls• 4)Contacts• 5)Datebook• 6)Messages• 7)VoiceRecord•8)Net• 9)Call ForwardJMy Info•My Name• Line 1• Line 2• Private ID• Group ID• Carrier IP• IP1 Address• IP2 Address• Circuit DataoProfilespCall AlertcGPS• Position•Privacy• InterfacetRing To n e s• Vibrate All• Ringer• Vibrate• SilentOMy PicturesNPT Manager•Quick PTT• Send Event• Send My Info• Send Contact• ConfigurePMOTOTalkLQuick PTTCBluetooth• Hands Free• Link to Devices• Device History•Setup•Find MeThis is the standard Main Menu layout. Your phone’s menu may be a little different.
8menu mapsettings menuDisplay/Info• Wallpaper•Text Size• Theme• Home Icons• Backlight•Clock• Menu View• Large Dialing• Status Light• LanguagePhone Calls• Set Line•Any Key Ans• Auto Redial• Call Waiting• Auto Ans• Minute Beep• Call Duration• TTY• Hearing Aid• Notifications• DTMF Dialing• Prepend2-Way Radio• Scan• Tkgrp Silent•Tkgrp Area• One Touch PTT• Alert Type• PTT Quick Notes•On/Off PTT• Store Rcvd InfoPersonalize• Menu Options•Up Key•Down Key•Left Key• Right Key• Center Key• Left Sftkey• Right Sftkey•Power UpVolume• Line 1• Line 2• Messages• Earpiece• Speaker•Keypad• Java Earpiece• Java Spkr•DataSecurity• Phone Lock• Keypad Lock• SIM PIN• GPS PIN• Change PasswdsAdvanced• Alert Timeout• Headset/Spkr• Connectivity• Reset Defaults• Return to Home•Transmitters• Phone Only• Baud Rate
9Use and CareUse and CareUse and CareTo care for your Motorola phone, please keep it away from:liquids of any kind dust and dirtDon’t expose your phone to water, rain, extreme humidity, sweat, or other moisture.Don’t expose your phone to dust, dirt, sand, food, or other inappropriate materials.extreme heat or cold cleaning solutionsAvoid temperatures below -10°C/14°F or above 45°C/113°F.To clean your phone, use only a dry soft cloth. Don’t use alcohol or other cleaning solutions.microwaves the groundDon’t try to dry your phone in a microwave oven.Don’t drop your phone.
10essentialsessentialsCaution: Before using the phone for the first time, read the Important Safety and Legal information included in the gray-edged pages at the back of this guide.about this guideThis guide shows how to locate a menu feature as follows:Find it: M > u > Phone CallsThis means that, from the home screen: 1Press the menu key M to open the Settings menu.2Press the navigation key to scroll to Phone Calls, and press the center key r to select it.symbolsThis means a feature is network or subscription dependent and may not be available in all areas, or might not be offered by your service provider. Contact customer service for more information.This means a feature requires an optional accessory.
11essentialsSIM cardinsert the SIM cardTurn off your phone and remove your battery before you install or remove a SIM card.Carefully slide the SIM card into your phone, until it lies flat in the SIM card holder. Warning: To avoid loss or damage, do not remove your SIM card from your phone unless absolutely necessary.batteryBattery Use & Battery Safety• Motorola recommends you always use Motorola-branded batteries and chargers. The warranty does not cover damage caused by non-Motorola batteries and/or chargers. Caution: Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard. Improper battery use, or use of a damaged battery, may result in a fire, explosion, or other hazard.•Battery usage by children should be supervised.
12essentials•Important: Motorola mobile devices are designed to work best with qualified batteries. If you see a message on your display such as Invalid Battery or Unable to Charge, take the following steps:•Remove the battery and inspect it to confirm that it bears a Motorola “Original Equipment” hologram; •If there is no hologram, the battery is not a qualified battery;•If there is a hologram, replace the battery and retry charging it;•If the message remains, contact a Motorola Authorized Service Center.•New batteries or batteries stored for a long time may take more time to charge.•Charging precautions: When charging your battery, keep it near room temperature. Never expose batteries to temperatures below 0°C (32°F) or above 45°C (113°F) when charging. Always take your mobile device with you when you leave your vehicle.•When storing your battery, keep it in a cool, dry place.•It is normal over time for battery life to decrease, and for the battery to exhibit shorter runtime between charges or require more frequent or longer charging times.•Avoid damage to battery and mobile device. Do not disassemble, open, crush, bend, deform, puncture, shred, or submerge the battery or mobile device. Avoid dropping the battery or mobile device, especially on a hard surface. If your battery or mobile device has been subjected to such damage, take it to a Motorola
13essentialsAuthorized Service Center before using. Do not attempt to dry it with an appliance or heat source, such as a hair dryer or microwave oven.•Use care when handling a charged battery: Particularly when placing it inside a pocket, purse, or other container with metal objects. Contact with metal objects (e.g., jewelry, keys, beaded chains) could complete an electrical circuit (short circuit), causing the battery to become very hot, which could cause damage or injury.Promptly dispose of used batteries in accordance with local regulations. Contact your local recycling center for proper battery disposal.Warning: Never dispose of batteries in a fire because they may explode.battery installation1Rotate the release lock counter-clockwise until it releases the battery door.2Remove the battery door.
14essentialsbattery chargingNew batteries are not fully charged. charge using the charger1Pull out the connector cover, and insert the charger into the accessory connector on your phone as shown.2Plug the other end of the charger into the appropriate electrical outlet.When you charge the battery, the battery level indicator at the upper right of the screen shows charging progress. At least one segment of the indicator must be visible to ensure full phone functionality while charging.3Push the battery down until it snaps in place.4Replace the battery door and press it gently until you hear a click.
15essentialsTip: Motorola batteries have circuitry that protects the battery from damage from overcharging.Note: This handset complies with environmental energy consumption requirements by notifying the user to unplug the charger from the power outlet when the charger is disconnected from phone/power outlet. This notice can be dismissed permanently by pressing - under No.turn it on & offTo turn on your phone, press and hold W for a few seconds or until the display turns on. If prompted, enter your four-digit unlock code.To turn off your phone, press and hold W for two seconds.Note: If you press the W for more than four seconds, the handset will power “On” in Transmitters Off mode. To avoid turning on the phone with transmitters off, ensure the power key is not held at about 4 seconds after power-up is initiated. To power up the phone normally from charging mode, wait until the Charger Attached screen is displayed, and then press the power key. See “transmitters” on page 63.enable securityYou must enable security the first time you power on you phone or within 10 days of first activation of your phone.1Press - under Ok.2Your are prompted to enable security. Press - under Yes. A series of screens
16essentialsfollowed by the default home page displays.3Press o to return to the home screen.make a phone callEnter a phone number and press O to make a call or use a voice command. See “place a call using voice name” on page 69.Tip: For best performance avoid touching the antenna with your fingers during the call.To hang up press o.answer a phone callWhen your phone rings and/or vibrates, you have the following options:1If you want to answer the call on speaker phone, press the speaker key ). To hang up press the smart key (.2If you want to answer the call using the handset, press O. To hang up press o.3If you are using a Bluetooth headset, you can press the answer key on your Bluetooth headset. To hang up press the same key on your Bluetooth.make a private callWith Private calls service, you use your phone as a long-range, digital 2-way radio using one-to-one Private calls or one-to-many group calls. Your Private ID is the number at which you receive one-to-one Private calls.Talkgroup numbers are numbers through which you receive one-to-many group calls.to make a Private call1Enter the Private ID you want to call.
17essentials2Press and hold the PTT button. Begin talking after your phone emits a chirping sound.3Release the PTT button to listen.To end the call press o.Note: A Private call ends automatically if there is no activity on the call for a few seconds.send call alertsSending a call alert discretely lets the recipient know that you want to talk to him or her on a Private call.When you send a call alert, the recipient’s handset displays your name and emits a series of beeps or vibrations.The recipient has the following options:to send a call alert1Enter the Private ID you want to call as you would when making a Private call.2Press - under Alert.When the message Ready To Alert appears on the display, press the PTT button until the message Alert Successful appears.answer a private call1When your phone emits a chirping sound or vibrates to indicate you are receiving a Private call, wait for the caller to finish speaking.OptionAnswer: Begin a Private call with the sender.Queue: Store the call alert to the call alert queue.Clear: Dismiss and delete the call alert.Option
18essentials2Press and hold the PTT button and begin talking after your phone emits a chirping sound.3Release the PTT button to listen.To end the call press o.answer a call alertWhen you receive a call alert, you must answer, queue, or clear it. You cannot receive phone calls or Private calls until you do.to answer a call alert1Press the PTT button to start a Private call with the sender.or2Queue the call allert by pressing - under Queue.or3Clear the call alert by pressing - under Clear.store a phone number or private IDYou can store a phone number or private ID in Contacts.Find it: M > L > [New Contact].1Enter a name for the new entry. Each entry’s name can contain 20 characters. 2Select a specific Ringer.3Select a type for the entry (Mobile, Private, Work1, Work2, Home, Email, Fax, Pager, Talkgroup, HUB, SDG, IP or Other). To store a private ID choose Private.4Enter the number for the entry and press - under Done.
19essentialsTip: Before saving the entry, you can save more information. You can store an Email address, IP addresses, and more. You can choose a special ringer, create Contact entries that are groups of Private IDs called Group IDs and/or SDG lists.After you have saved the number, the new Contacts entry is displayed.call a stored phone number or private IDShortcut: From the home screen press - under Contcs.orFind it: M > L. 1Scroll to the Contacts entry.Tip: By pressing the first letter of the name of the Contacts you want, you will be taken to all the contact names starting with the letter you pressed.2If the Contacts entry contains more than one number, scroll left or right until the type of the number you want to call is displayed (Mobile, Private, Work1, Work2, Home, etc.).3If you chose a phone number, press O to call the entry.orIf you chose a Private ID, Talkgroup ID, or SDG List, press and hold the PTT button to call the number.Tip: If the Contacts entry you scrolled to contains a Private ID, you can make an instant Private call to that Private ID by pressing and holding the PTT button, even if the Private ID is not the type of number displayed.
20essentialsyour phone number and Private IDFind it: M > J.Tip: Want to see your phone number or Private ID while you’re on a call? Press M > My Info.text messagesIf your service provider offers Text Messaging, your phone sends text messages using MOSMS and receives text messages from other phones that are using MOSMS.set it upBefore you begin using text messaging, you may need to set up your signature, service center number, and expiration information.Shortcut: From the home screen press - under Msgs > M > Text Msg Setup.orFind it: M > E > M > Text Msg Setup.The following options become available:optionSignature: Enter your signature (up to 11 characters long).Delivery Report: Set it to On if you wish to receive a report once the message has been delivered.Srvc Cntr No: Enter the phone number of your service center. If you do not know this number, contact your service provider.Expire After: This is the amount of time messages you send are saved at the service center if they cannot be delivered. After this period, they are discarded.
21essentialsPress - under Done to save the information you entered.receive a text message1To view the message press - under Read.2To dismiss the message notification press - under Back.Note: If your phone is powered off when you receive a text message, your phone notifies you the next time you power it on. If you are out of your coverage area, your phone alerts you when you return to your coverage area.Tip: While reading a text and numeric message that contains a phone number, you can press O to call that number.read from the Message center1From the home screen press - under Msgs > Inbox > Text Inbox.2Select the message you want to read or press the number of the message you Cleanup: Set this option to On if you want your phone to delete sent messages.If you select Cleanup, select Clean Up After to set the number of days after which sent messages are deleted or the number of messages to be kept.Quick Notes: Are short, pre-written text messages that you can create, edit, and send in your text messages. You can store up to 20 quick notes. A quick note may be up to 30 characters long.Select Quick Notes to create a [New Note] or press - under Edit to change the pre-written quick notes.option
22essentialswant to read. If the message fills more than one screen, scroll to read it.Tip: Scrolling through one message lets you view the next message.3To reply to the message, press - under Reply or to see all other choices, including forwarding and deleting the message, calling the sender, or storing the sender’s number in Contacts, press M.create and send text messages1From the home screen press - under Msgs > [Create Message] > [Create Txt Msg].orYou can also create a text message from the Inbox, Outbox, or Drafts.2To address the message use the keypad to enter the phone number of the person you want to send the message to and press r.or From the Send To screen press - under Contcs, or press M > Recent Calls. Select the number you want.3Select Msg: and enter the text of the message or to use a quick note press - under Browse and scroll to the quick note you want.4Press M > Set Send Method and select Text, Fax, x400, Paging, Email, ERMES, or Voice.5If you want to send the message, press - under Send or to delete the message without sending it, press - under Cancel.Note: If you want to request confirmation of delivery press M > Delivery Report > On.use draftsWhen you save a message as a draft, it is saved in the drafts folder.
23essentialsShortcut: From the home screen press - under Msgs > Drafts > Text Draft.1Select the draft you want to edit. You also have the choice to create new text messages from this menu.2To edit the fields you want to change, follow step 2 through step 5 in “create and send text messages” above.resend text messagesShortcut: From the home screen press - under Msgs > Outbox > Text Outbox.1Scroll to the message you want to resend or press the number of the message you want to resend.2Press M > Resend.delete sent text messagesShortcut: From the home screen press - under Msgs > Outbox > Text Outbox.1Scroll to the message you want to delete.2Press - under Delete.3Press - under Yes to confirm.delete all unlocked sent messagesShortcut: From the home screen press - under Msgs > Outbox > Text Outbox.1Press M > Delete All.2Press - under Yes to confirm.manage memoryYour text inbox, outbox, and drafts folder have a set amount of memory available for storing messages.
24essentialsThe text inbox holds 20 messages. If the text inbox is full, you cannot receive messages until you delete some.The outbox and drafts folder hold 30 messages each. If the outbox and drafts folder memory is full, you cannot send messages or save drafts until you delete some.To view the amount of memory available in your text inbox:Shortcut: From the home screen press - under Msgs > M > Text Msg Setup > Mem Mtr-Inbox.To view the amount of memory available in your outbox and drafts folder:Shortcut: From the home screen press - under Msgs > M > Text Msg Setup > Mem Mtr-Other.using your handset as a modemYou can use your handset as a modem (Packet Data only) with a laptop, handheld device, or desktop computer. Circuit Data is not supported. In order to use your handset as a modem, you must create either a wired or wireless connection between your handset and the other device. To connect your handset wirelessly, you must have a Bluetooth adapter for the other device.connect via BluetoothUse your handset as a modem via Bluetooth. The laptop, handheld device, or desktop computer you want to connect to must have a Bluetooth adapter installed.Check that the adapter is properly installed, and then follow the specific instructions
25essentialsoutlined in the device’s user guide to connect the device to your handset.When used as a modem, your handset is enabled for Data Modem transfer mode, which is used for small file transfers such as email.Note: To use these services, you must install the iDEN Wireless Data Services software (available separately). For more information on setting up your computer and your handset for Packet Data calls, contact your service provider.
26main attractionsmain attractionsPTV featuresWith Push To View features, your phone can send and receive the following items through Private calls with other phones that have this capability:•Short text messages1•Pictures1•Datebook events•My Info•Contact informationYou can choose to send messages, pictures, events, My Info, or Contacts information to the Private ID you are engaged in a Private call with, Private IDs on the Recent Calls list, and Private IDs stored in Contacts.When you make or receive a Private call, your phone automatically determines whether the phone you are engaged in a Private call with is able to receive each of these items. Your phone saves this information for as long as the Private ID is on your Recent Calls list or is saved in your Contacts. Your phone updates the saved information each time you make or receive a call to or from that Private ID.You can turn your phone’s ability to send and receive messages, pictures, or events information On and Off.Note: You cannot send PTT feature items during Talkgroup calls or SDGC calls.1. Additional charges may apply.
27main attractionssend messagesThe Push to Send Messages feature lets you send short text messages through Private calls.When you send a message, it appears on the display of the phone you are engaged in the Private call with.begin a message and choose a recipient You can begin a message during a Private call, from the Contacts list, the Recent Calls list, or from the PT Manager.begin a message during a Private callWhile in a Private call, press M > Use PTT Feature > Send Message.Note: The first time you send a message, Messaging Fees May Apply. Continue? appears and you are prompted to respond. Press - under Yes to acknowledge the message.begin a message from the Contacts or the Recent Calls list1From the Contacts or the Recent Calls list, select the entry containing the Private ID you want to send the message to.2Press M > Use PTT Feature > Send Message.begin a message from the PT ManagerThe PT Manager lets you select the Private ID you want to send the message to from Contacts or the Recent Calls list.Find it: M > PT Manager > Send Message.Then select A Contact or A Recent Call to see a list of entries from the Contacts or the Recent Calls list that can receive messages.
28main attractionscreate messagesAfter you have begun a message and chosen a recipient, a screen appears that lets you create the text of the message you want to send. Your message may be up to 400 characters long. You can choose from a list of ready-made words or short phrases called Quick Notes. You can use a Quick Note as it is or edit it before you send it. Editing a Quick Note changes the Quick Note for this message only and will not change the Quick Note on the list. send a completed messageAfter you have completed your message, press the PTT button to send it.receive messages When you receive a message, a message notification appears on the display. To view the message: Press - under View. To dismiss the message press - under Dismiss.reply to a message1View the message.2Press - under Reply.3Create the message and press the PTT button to send it.send picturesYou can send pictures stored in the My Pictures through Private calls. The picture you send appears on the Private call recipient’s display. If the recipient accepts the picture, their phone saves the picture. The picture then appears in that phone’s recent call list.
29main attractionsThe first time you send a stored picture after turning the phone on, Picture Fees May Apply. Continue? appears and you are prompted to respond. You are charged only once for that picture.Note: You cannot make or receive Private calls while transmitting or receiving a picture.send a picture during a call1While in a Private call, press - under Picture or press M > Use PTT Feature > Send Picture.A list of pictures that can be included in a Private call appears.2Select the picture you want to send.3Press the PTT button to send the picture.4Wait while the picture is transmitted. The Private call is temporarily interrupted while a picture is transmitted.5When prompted, press the PTT button to resume the Private call.Note: After you send or receive a picture via PTT with a user, that picture will be displayed every time you are in a private call with that user. That picture is saved in the media center and a link is created between that contact and the picture.start a call by sending a picture from My Pictures:Find it: M > My Pictures1Select the picture you want to send.2Press M > Send via PTT.3Select A Contact or A Recent Call.A list of contacts that have Private IDs and are able to receive pictures appears.4Select the name of the person you want to send the picture to.
30main attractions5Press the PTT button to send the picture. 6When prompted, press the PTT button to resume the Private call.from the PT Manager:Find it: M > PT Manager > Send Picture.1Select A Contact or A Recent Call.A list of contacts that have Private IDs and are able to receive pictures appears.2Select the name of the person you want to send the picture to.3Select the picture you want to send.4Press the PTT button to send the picture.5Once picture has been sent, when prompted press the PTT button to resume the call.receive a picture When someone sends you a picture, your phone emits a tone or vibrates and a message appears asking if you want to accept the picture. Pictures you receive are saved to your phone’s memory. They are accessible through My Pictures. When you see a message asking if you want to accept the picture, press Yes to accept or No to decline.Tip: If you want to stop the transmission before it is finished, press o. Note: The first time you accept a stored picture after turning the phone on, Picture Fees May Apply. Continue? appears and you are prompted to respond. Press - under Yes to accept the picture.
31main attractionsclear a picture from the display If you want to clear a picture from your phone’s display while still on a call, press M > Clear Screen. The picture will not appear on the display again the next time you receive a call from person who sent it. This does not delete the picture from My Pictures.send a datebook eventYou can send an event already stored in your phone’s datebook or create a new datebook event to send. You can send datebook events during private calls, from the Contacts list, Recent Calls list or from the PT Manager.to send a datebook event during a private call1While in a Private call press M > Use PTT Feature > Send Event. Note: If these options do not appear on the menu, the Private ID you are engaged in a private call with is not able to receive Datebook events.2If you want to create a new datebook event, press - under New and create the event in your datebook. If you want to chose an existing event do so.3If the event is a recurring event, select This Event Only to send only the event selected. Select Repeat Events to send all ocurrences of the event.4Push the PTT button to send the event.
32main attractionssend my info1While in a Private Call press M > Send via PTT, and push the PTT button to send.or2From the home screen press M > My Info > M > Send via PTT and push the PTT button to send.set my info sending optionYou can control what portion of the information in My Info is sent and whether it is sent automatically in every call or only when you choose to send it. Find it: M > PT Manager > Configure > PTT My Info > Info to Send.1Select or remove the fields you want to send.2Press - under Done.The information your phone sends always includes My Name and Private. You may also send Line 1, Line 2, Carrier IP, and Circuit Data, depending on your sending options. automatic sending To control whether you send your information automatically: Find it: M > PT Manager > Configure > PTT My Info > Auto Send.1Select On or Off.2When you make a call in which your information is sent automatically, the name you entered in the My Name field of My Info appears on the display of the recipient’s phone, even if your name and Private ID are not stored in the recipient’s Contacts.
33main attractionssend contact information1While in a Private Call press M > Use PTT Feature.2Select Send Contact and select the contact information you want to send.3Push the PTT button to send.or1From the home screen press M > PT Manager > Send Contact.2Enter the Private ID number of the person you want to send the Contact information to or press - under Browse.3Select from Recent Calls, Contacts, or Memo.4Select the contact information you want to send and push the PTT button.turn PTT features on and off You can turn your phone’s ability to send and receive messages, pictures, and Datebook events on and off. You cannot turn your phone’s ability to send and receive My Info and contact information on and off. Find it: M > PT Manager > Configure > On/Off PTT.1Check or uncheck Messages, Pictures and/or Events.one touch PTTFind it: M > PT Manager > Configure > One Touch PTT.
34main attractionsOne Touch PTT sets your phone to do any of the following each time you press the PTT button from the home screen:quick PTTQuick PTT lets you quickly make a call, create an SDG list or make a SDG call when access any Private IDs on your phone. optionOff: Nothing happens when you press the PTT button from the home screen.Quick PTT: Go to Quick PTT. See “quick PTT” on page 34.Last Call: Call the most recent Private ID or Group on the recent calls list. Assigned No.: Call a Private ID you assign. Enter the number using your keypad, or press - under Search. Select Contacts, Recent Calls, or Memo.If you are entering a Talkgroup number, press # before the number.PT Manager: Go to PT Manager. See “PT manager” on page 35.Send Message: Go to the first screen to send a message. See “send messages” on page 27.Send Picture: Go to the first screen to send pictures. See “send pictures” on page 28.Send Event: Go to the first screen to send a Datebook Event. See “send a datebook event” on page 31.Send My Info: Go to the first screen to send My Info. See “send my info” on page 32.Send Contact: Go to the first screen to send a contact. See “send contact information” on page 33.option
35main attractionsTo view a list of Contacts and SDG lists with Private IDs in Contacts: Find it: M > Quick PTT.To move between Contacts, Recent Calls, or Memo, use the left or right, or press * or #.To make a Private call or SDG call: 1Select the entries you want.2Press - under Done.3Push the PTT button.To save your selections as a SDG list press M > Save SDG. For more information about SDG lists, see “selective dynamic group (SDG) calls” on page 72.If you want to assign a name to the SDG list, enter the name.Note: If you do not assign a name, the SDG list is named SDG followed by the number of members in the SDG list. For example, SDG (8) for a SDG list with 8 members.PT managerThe PT Manager lets you quickly access PTT features, and other Private call features, from the main menu. You can also access the Quick PTT feature and set the One Touch PTT feature.Find it: M > PT Manager.1Select Quick PTT to quickly find a contact that has a Private ID.or2Select Send Message, Send Picture, Send Event, Send My Info, or Send Contact. After choosing what PTT item you are sending, select a contact and press the PTT button to send.or3Select Configure to configure your PTT Quick Notes, PTT My Info, One Touch PTT, or On/Off PTT.
36main attractionsMMSMultimedia Messaging Service (MMS) lets you send and receive messages that may include text, pictures and audio recordings. Depending on your service provider, your phone may support MOSMS as well as MMS. You should see no significant differences between the two; some names of menu items and the steps you take to access features may differ.create a message Shortcut: From the home screen press - under Msgs > [Create Message] > [Create MMS Msg].orFind it: M > Messages > [Create Message] > [Create MMS Msg].Note: You can also create a message from Contacts, Recent Calls, or the home screen.To address the message: 1Select To to bring up a list of address slots.2Highlight a slot and press r.3Enter the phone number or email address using the keypad. orPress Browse to select from Contacts or Recent Calls.4Press r when done.5Add additional phone numbers or email addresses as necessary.Tip: To remove a phone number or email address from the list of message recipients, scroll to the phone number or email address and press - under Remove.6When you are finished addressing the message, press - under Back.To enter or edit the body of the message:
37main attractions1Select Mesg.2Enter text using the keypad or press - under QNotes to select a quick note of your choice (see “quick notes” on page 38) and press r.more message options To view more message fields in a message you are creating, select ...More...The following options become available:reply to a message You can reply to a message while you are viewing it, or while a previously viewed message is highlighted in the message center. You cannot reply to unread messages. To reply to a message: 1View the message you want to reply to.2To reply to the sender only, press Reply or Reply All. 3A list of short phrases appears. Select any of these phrases to add it to your messages or select [Create Reply].optionSubject: Create or edit the Subject line.Attach: Attach a picture, audio file or voice record.Cc: Send a copy of this message to someone else.Auto Replies: Allows you to create a list of possible short answers for the recipient to choose when replying to your message.Priority: Set priority Normal or High.Report: Set receipt confirmation On Delivery.Valid Until: Set a date after which attempts to deliver the message end, or press - under No Date.option
38main attractions4Edit any message fields you want to change. 5Press - under Send.quick notesWhen you are filling in the Message and Subject fields, you can add ready-made words or short phrases called quick notes. After you add these words or phrases, you can edit them as you would any other text. 1While you are creating a message, scroll to or select Message or Subject. 2Press - under QNotes.3Select the quick note you want to insert into the message. attach a picture and audio recording or a ring toneYou can attach one or more pictures, audio recordings or ring tones from your phone into the body of the message. You can include text in the body of your message in addition to these items. insert items While you are filling in the Attach field, press [New] > My Pictures, VoiceRecord or Ring Tones.A list of available pictures, audio recordings and ring tones appears. Select the picture, voice record or ring tone you want to attach. Tip: To view or listen to the item before attaching it, highlight it and press View or Play.Note: You can only attach audio files and pictures if they are not forward locked and if
39main attractionstheir DRM settings do not prevent you from sending.Forward locked items are usually copyright protected, and you cannot share them with anyone, such as in Private calls or by uploading them from your phone.create a new voice recordYou can create a new voice record to send with a message:1Press M or select Attach > [New].2Select VoiceRecord > [New VoiceRec].3Say the message you want to record into the microphone. 4When you are finished recording, pressr.5When you are finished, press - under Back and - under Done.6The voice record is attached to the message and saved to the media center and the list of voice records. remove an attachmentTo remove an attachment in a message you are creating: 1Select Attach.2Scroll to the attachment you want to remove. 3Press M > Unattach.draftsWhile composing a message you can save it in the MSS drafts folder by pressing M > Save.You can continue to create the message. The version you saved in the MMS drafts folder will not change.
40main attractionssend a draft Shortcut: From the home screen press - under Msgs > Drafts > MMS Drafts.1Select the draft you want to send.2Press - under Send. Note: If Send does not show as an option, you might need to complete required fields in the message in order to send it.edit a draftShortcut: From the home screen press - under Msgs > Drafts > MMS Drafts.1Select the draft you want to edit.2Press r.delete a draftWhen you send a draft, it is removed from the MMS drafts folder.1To delete a message in the MMS drafts folder without sending it, scroll to the message you want to delete and press - under Delete.2Press - under Yes to confirm. MMS outboxMMS messages you have sent or tried to send are stored in the MSS Outbox.forward items from the outboxShortcut: From the home screen press - under Msgs > Outbox > MMS Outbox.1Scroll to the message you want to forward.2Press M > Forward. 3Make editions if you wish, select the recipient and press - under Send.
41main attractionsresendIf a message was not sent from your handset, you can resend it. Shortcut: From the home screen press - under Msgs > Outbox > MMS Outbox.1Scroll to the message you want to resend. 2Press - under Resend. Note: If your message was sent successfully, Resend will not appear as an option.check delivery status If a message was successfully sent and you set the message to give a report confirming delivery, you can check the delivery status: Shortcut: From the home screen press - under Msgs > Outbox > MMS Outbox.1Scroll to the message you want to view.2Press M > Delivery Status. delete a message1Scroll to the message you want to delete.2Press M > Delete Multiple.3Select the message or messages you want to delete and press - under Delete.4Press - under Yes to confirm.receive a message When you receive an MMS message, a message notification appears on the display. 1To view the message press r. If your phone is set to download new messages automatically, the message downloads from the message server now. 2If your phone is set to prompt you before downloading new messages, press M.3If the message fills more than one screen, scroll down to read it.
42main attractionsembedded objects and attachments Messages may contain pictures or audio recordings as part of the body of the message or as attachments. If a message contains pictures or audio recordings in the body of the message, highlight each picture or audio recording to view or play it. If a message contains a picture or audio recording as an attachment, open the attachment to view the picture or play the audio recording.open attachments1View the message.2Highlight the attachment you want to open. Attachments appear at the end of a message.3Press r. Note: Attachments that are of an unknown type cannot be opened, but they can be deleted.view received messages from the message center Shortcut: From the home screen press - under Msgs > Inbox > MMS Inbox.Select the message. If the message has not yet been downloaded from the message server, it is downloaded now.delete unread messages 1Scroll to the message you want to delete.2Press - under Delete and - under Yes to confirm.
43main attractionslock and unlock messagesLocked messages cannot be deleted until you unlock them. 1View the message you want to lock or unlock. 2Press M > Lock Message or Unlock Message. call a number in a message If a message you receive contains a phone number, Private ID, or Talkgroup ID in the From field, the To field, the Cc field, the Subject field, or the body of the message, you can call or send a call alert to that number. send a call alert 1View the message.2Highlight the Private ID or Talkgroup ID you want to alert. 3Press M > Alert. 4Push the PTT button. make a group call 1View the message. 2Press M.3Highlight the Talkgroup ID you want to call. 4Select Talkgroup. 5Push the PTT button. store message information to contacts If a message you receive contains a phone number, Private ID, Talkgroup ID, or an email address in the From field, the To field, the Cc field, the Subject field, or the body of the message, you can store this information to Contacts. 1View the message.
44main attractions2Highlight the number or email address you want to save. 3Press M > Save Number or Save Email. 4To store the number or email address as a new entry, select [New Contact].To store the number or email address to an existing entry, select the entry. 5With the Contacts type field highlighted, press left or right to display the Contacts type you want to assign the number or email address. 6Press - under Save. go to a website If a message contains one or more website URLs, you can go to that website. 1View the message. 2Highlight the website URL you want to go to. 3Press M > Go To Website. Note: The entire URL must appear in the message to allow you to open the website. save an embedded picture or audio recording To save a picture or audio recording that is part of the body of a message you receive: 1View the message. 2Highlight the picture or audio recording you want to save. 3Press M. 4Select Save Picture or Save Audio. The item will save in the default storage location. Note: Some types of pictures and audio recordings can be viewed or played, but not saved.
45main attractionsdelete an embedded picture or audio recording To delete a picture or audio recording that is part of the body of a message you receive: 1View the message. 2Highlight the picture or audio recording you want to delete and press M. 3Select Delete Picture or Delete Audio.save attachments 1View the message.2Highlight the attachment you want to save. 3Press M > Save Attachment. Selected items save to the default storage location. Note: Some types of pictures and audio recordings can be viewed or played, but not saved.delete attachments 1View the message. 2Highlight the attachment you want to delete. 3Press M > Delete Attachment. 4Press - under Yes to confirm. message transmission After you start to send a message you have created or start to download a message you have been sent, you can still stop the message transmission from being completed by pressing o.
46main attractionscustomize MMS Shortcut: From the home screen press - under Msgs > M > MMS Setup.orFind it: M > g > M > MMS Setup.This option is available from many context-sensitive menus when you are using MMS.The following options become available: optionFriendly Name: Enter text here to create a friendly name. Your friendly name is the name displayed in the From field on other iDEN handsets when they receive messages from you. Signature: Enter text here to create a signature. Your signature is text that is automatically inserted at the end of all messages you create. You can edit the text before sending the message. Quick Notes: Lets you create new Quick Notes and edit or delete Quick Notes you have created. Replies: Lets you create new reply phrases and edit or delete reply phrases you have created. Cleanup: Controls how long messages remain in the Inbox and Outbox before they are deleted. Downloads: Controls whether your phone automatically downloads new messages when they arrive, or only after you respond to a prompt or read the message from the Inbox. Set this option to Automatic if you want your phone to download new messages automatically; set the option to Manual if you want your phone to prompt you before downloading new messages. option
47main attractionsnew quick notes and reply phrases Note: These Quick Notes are not the same as the quick notes used with MOSMS messages. Each messaging service has its own quick notes feature. create quick notes1From the MMS Setup menu, select Quick Notes or Replies. 2Select [New QuickNote] or [New Reply]. 3Enter text from the keypad and press r.edit quick notes You can edit only Quick Notes and reply phrases you have created. 1From the MMS Setup menu, select Quick Notes or Replies. 2Select the quick note or reply phrase you want to edit. 3Edit the text and press r. delete only quick notes and reply phrases you have created1From the MMS Setup menu, select Quick Notes or Replies. 2Scroll to the quick note or reply phrase you want to delete. 3Press - under Delete. 4Press - under Yes to confirm. Memory Size: Shows the total amount of Used, Free, and total Capacity of the phone’s memory.option
48main attractionsdelete all quick notes or all reply phrases you have created1From the MMS Setup menu, select Quick Notes or Replies. 2Press M > Delete All. 3Press - under Yes to confirm. clean up optionsThe clean up option controls how long messages remain in the Inbox and Outbox before they are deleted. You set the clean-up option for the Inbox and Outbox separately. The clean up option deletes only read, unlocked messages. Shortcut: From the home screen press - under Msgs > M > MMS Setup > Cleanup.orFind it: M > g > M > MMS Setup > Cleanup.1Select Inbox or Sent Items.2Choose a clean up option from the following list:optionOff: Messages are never automatically deleted.5 Messages: If you have more than 5 messages, messages are deleted in the order they were received, starting with the oldest, until 5 are left. 10 Messages: If you have more than 10 messages, messages are deleted in the order they were received, starting with the oldest, until 10 are left.With these options, messages are deleted in the order they were received, starting with the oldest, until the selected number are left.
49main attractions3Press - under Yes to automatically delete messages now or press - under No to delete messages later. delete all messages To delete all read, unlocked messages from the Inbox, all messages in the Drafts folder, or all successfully sent messages in the Outbox: Shortcut: From the home screen press - under Msgs.orFind it: M > g. 1Select Inbox, Drafts, or Outbox.2Select MMS Inbox, MMS Drafts, or MMS Outbox.3Press M > Delete Multiple and check the messages you want to delete. 4Press - under Yes to confirm.bluetooth® Your handset supports the use of wireless Bluetooth headsets. Find it: M > Bluetooth.The Bluetooth connection menu contains an option to search for Audio Devices.1 Day: Messages are deleted if they are older than 1 day. 3 Days: Messages are deleted if they are older than 3 days. With these options, messages are deleted when you exit the message center after setting the option.Custom: Lets you create a clean-up option of up to 99 messages or 99 days. for the inbox option
50main attractionsturn Bluetooth On or OffYou can turn your phone’s Bluetooth feature on or off. While Bluetooth power is on, your phone can communicate with other devices.Find it: M > Bluetooth > Setup > Power.1Select On to power Bluetooth On.2Select Name if you wish to assign a name to your handset.3Select Find Me Time to determine the amount of time in which your handset can be found by other Bluetooth devices.Tip: You can turn off Bluetooth if you want to prolong battery life or if you enter an area where Bluetooth is prohibited.make a Bluetooth connectionconnect your handset with a Bluetooth headsetFind it: M > Bluetooth > Hands Free > [Find Devices].1Follow the instructions on your Bluetooth headset to set it up to be found.2Once your Bluetooth headset is set to be found press r on your handset. Your phone will scan the Bluetooth headset until it finds it. Press r when you see the name of the Bluetooth headset on your screen.3Your handset requires that you create a bond in order to connect with a Bluetooth headset. Press - under Yes when you are prompted to bond with the headset.4Enter the Bluetooth pass key.Some Bluetooth devices ship with Bluetooth PINs. Please refer to your
51main attractionsBluetooth device’s user guide to locate this information.If a device ships without a Bluetooth PIN, then you can enter any PIN for that device. To establish a connection to that device, enter the same PIN for both your phone and the device. For example, if you enter 1234 as the device’s PIN, then enter 1234 as your phone’s PIN.5Press - under Ok.Note: This handset offers bluetooth auto pair feature with auto pair compatible Motorola devices. When bonded via bluetooth with a certain device, the pin will not be requiredconnect your handset with another Bluetooth deviceFind it: M > Bluetooth > Link To Devices.1Select the device you want from the list of found devices on your screen.2Create a bond if you are prompted to do so.Tip: If you have previously connected to a device, the device will be stored on your phone so you can connect with it easily.use Bluetooth during a callYou can connect with available Bluetooth devices during a call.Note: If the Handsfree Devices list contains only one device, then your phone will automatically try to connect to that device.1While in a call, press M > Use Bluetooth.2Press - under Yes to power On Bluetooth.3Select the audio device you want to connect to from the list of Handsfree Devices.
52main attractionssend information via BluetoothYou can use your handset to send contacts entries, or datebook events to another Bluetooth device.The receiving device must be within 32 feet (10 meters) of your phone in order to connect with yours.Note: Files sent or received may be up to 200 kb, depending on your service provider.send ContactsShortcut: From the home screen press - under Contcs.1Select the contact you want to send.2Press M > Send Via... > Bluetooth.3Press - under Yes to power On Bluetooth.4Select the device you want to transfer the contact information to.orSearch for the device by selecting [Find Devices].5If prompted, bond with the device.Your phone connects with the devices and transfers the contact.send a Datebook eventFind it: M > Datebook1Select the datebook event you want to send.2Press M > Send Via... > Bluetooth.If the event you select repeats, then you will be prompted to choose whether to send the selected instance of the event or all instances of the event.
53main attractionsTo send only the selected instance of the event, select This Event Only.orTo send all instances of the event, select Repeat Events.3Press - under Yes to power On Bluetooth.4Select the device you want to transfer the contact information to.orSearch for the device by selecting [Find Devices].5If prompted, bond with the device.Your phone connects with the device and sends the datebook event.advanced featuresNote: These features may not be offered by your service provider. For additional intrinsically safe information, please consult the FM Supplement manual that is included with the i365IS.group calls, talkgroups, and hubs A group call is similar to a private call, but is made to all members of a Talkgroup at once. A Talkgroup is a predetermined group of your service provider’s customers. A hub consists of 1 to 4 Talkgroups. You must join a Talkgroup to make or receive calls on that Talkgroup. On your phone, you join a Talkgroup by joining the hub it belongs to.On your phone, all group calls you make are hub calls. Group calls you receive are hub calls
54main attractionsor Talkgroup calls to Talkgroups in the hub you have joined.Your sales representative or your service provider establishes Talkgroups and hubs for you. You can choose a name for each when you create entries for them in Contacts.join a hub1Press #. 2Enter the hub number using the keypad. orScroll to the hub name in Contacts or recent calls list.3Press - under Join.create a talkgroup hub1Begin creating a new Contacts entry. See “store a phone number or private ID” on page 18.2Assign the hub Contacts type to the entry.3Assign the Talkgroup number as the number of the hub.This creates a hub with the same number as the Talkgroup it contains. You cannot add any more Talkgroups to this hub.view hub details1From the recent calls list, scroll to the hub.2Press M.3Select Details.Find it: M > Select Details.make group calls1Press #. Enter the hub number using the keypad. orScroll to the hub name in Contacts or recent calls list.2Proceed as if making a private call.
55main attractionsreceive group callsWhen you receive a group call, the following appears on the screen:•The name of the hub•The name or number of the primary Talkgroup in the hub•The private number of the person speakingTo answer a group call:•Proceed as if answering a private call. Only one person at a time may speak on a group call.set talkgroup scan1From the main menu, select Settings > 2-Way Radio > Scan.2Press - under OK.3Scroll to On.4Press - under Select.To set your phone to receive group calls only from the primary Talkgroup in a hub:•Scroll to Off in step 3.Find it: M > Call Setup > Scan.turn off group calls1From the main menu, select Settings > 2-Way Radio > Tkgrp Silent.2Press - under OK.3Scroll to On if you don’t want to hear group calls. orScroll to Off if you want to hear group calls.Note: Setting Tkgrp Silent to On prevents you from hearing emergency group calls.emergency group calls An emergency group call is a hub call that takes priority over all other phone
56main attractionsactivities in the phone making the call and sounds a special emergency tone in the phones receiving the call.When you make an emergency group call, a group call is made using a designated emergency hub or the hub you currently belong to.A designated emergency hub must be created for you by your service provider and is stored on your SIM card.If no designated emergency hub has been created for you, emergency group calls you make are made using the hub you currently belong to. If no designated emergency hub has been created for you and you have not joined a hub, you cannot make emergency group calls.make an emergency group callCaution: Making an emergency group call ends all other activity on your phone, including 911 emergency calls.To make an emergency group call:1Press and hold s for 3 seconds to start the emergency group call.2Press and hold the PTT button on the side of your phone to talk. Begin talking after your phone emits a chirping sound.3Release the PTT button to listen.To end an emergency group call:•Press and hold s for 3 seconds.An emergency group call automatically ends if there is no activity for 30 seconds.Emergency group calls you make or receive do not appear in the recent calls list.
57main attractionsreceive an emergency group callWhen receiving an emergency group call, your phone sounds a special emergency tone, unless your phone is set to make no sounds.To answer an emergency group call:•Proceed as if answering a private call.isolated operationIsolated Operation lets you continue to make and receive group calls on the hub you last used, within a limited coverage area, even if you lose network coverage.When you lose network coverage during a phone call, private call, group call, or data transfer, the call or data transfer ends. But you can make and receive new group calls on the hub you last used.If the One Touch PTT settings on your phone would prevent you from making group calls on the hub you last used, these setting are overridden while your phone is in Isolated Operation.Caution: You cannot make emergency group calls in Isolated Operation, even if the hub you last used is the designated emergency hub. You must have network coverage to make emergency group calls.If the designated emergency hub is the hub you last used when you lost network coverage, your phone treats the hub you used before the designated emergency hub as the hub you last used.call alert status messages You can send call alerts that include text messages up to 10 characters long. These messages are stored on your SIM card when your receive your phone. There are 10 you can choose from.
58main attractionsIf the phone you send the call alert to has this capability, the text message appears on that phone when the call alert is received. If the phone you send the call alert to does not have this capability, the call alert appears without the text message.send a call alert status message1Proceed as you would when sending any call alert.2When the Ready to Alert screen appears, choose the text message you want to send:Scroll left or right to display the message you want to send. orPress - under Select to view all messages and select the one you want to send. orPress the number on you keypad associated with the message you want to send. Press 1 and then 0 to choose message 10.3 Press the PTT button until Alert Successful appears on the display.receive a call alert status messageWhen you receive a call alert that includes a text message, the text message appears as the part of of the call alert information when you receive the call alert and in the recent calls list.
59basicsbasicsSee page 1 for a basic phone diagram.displayThe home screen shows when you turn on the phone. To dial a number from the home screen, press number keys and O.Note: Your home screen may look different.Soft key labels show the current soft key functions. For soft key locations, see page 1.status indicatorsStatus indicators are shown at the top of the home screen:1Signal Strength Indicator: Vertical bars show the strength of the network Date and TimeRight Soft Key LabelLeft Soft Key LabelReady10:05 am 4/17Contcs Msgs1. 2. 3. 4. 5. 6. 7.Ready10:05 am 4/17Contcs Mesg
60basicsconnection. You can’t make or receive calls when 1 or 0 shows.2Active Phone Line: 1 indicates phone line 1 is ready to make calls; 2 indicates phone line 2 is ready to make calls.3Speaker On/Off : Sounds associated with Private calls and group calls can be set to come through the earpiece rather than through the speaker.4Ringer Vibe/Off: Your phone is set to not ring.5Message Indicator: Shows when you receive a text message.6Packet Data: Your handset is ready to transfer packet data or is transferring packet data when it shows a blinking arrow.7Battery Charge Indicator: A fuller battery indicates a greater charge. Recharge the battery when your phone shows Low Battery.main menuAll your phone’s features can be accessed through the main menu. You can set the main menu to appear as List View or Icon View.Find it: M > u > Display/Info > Menu View.text entrySome features let you enter text.Your phone provides convenient ways to enter words, letters, punctuation, and numbers whenever you are prompted to enter text (for example, when adding a Contacts entry or when using Text Messaging).change the character input mode1When you see a screen where you can enter text, press M to change the character input mode.
61basics2Select one of the following options:Tip: When entering text, press and hold # to change letter capitalization (Abc > ABC > abc).word methodThe Word English text input method lets you enter text into your phone by pressing keys just once per letter.The Word English text input method combines the groups of letters found on each phone key with a fast-access dictionary of words, and recognizes what you want to text as you type. It first offers the most commonly-used word for the key sequence you enter and lets you access other choices with one or more presses of the 0 key.enter a word using “word” method character input1Select the Word character input method. 2Press the corresponding keys once per letter to enter a word (for example, to enter the word Bill, press 2455). If you make a mistake, press - under Delete or * to erase a single character. Press and hold - under Delete or * to delete an entire entry.3To accept a word and insert a space, press#.entry methodAlphaPress a key several times for different characters.WordEnter words using a predictive text entering system that lets you enter a word with fewer key presses.SymbolsEnter symbols.NumericEnter numbers by pressing the numbers on the keypad.
62basicsTo accept a word completion (such as Billion when you entered Bill), press right.If you get a word you don’t want, you can press the 0 key to see more word choices and pick the one you want.alpha methodTo enter characters by tapping the keypad: 1Select the Alpha method.2Press the corresponding keys repeatedly until the desired letter appears. (For example, to enter the word Bill, press 2 twice, 4 three times, 5 three times, and 5 three times again. If you make a mistake, press - under Delete to erase a single character. Press and hold - under Delete to erase an entire entry.By default, the first letter of an entry is capitalized and the following letters are lowercased. After a character is entered, the cursor automatically advances to the next space after two seconds or when you enter a character on a different key.Characters scroll in the following order: characters1. ? ! , @ & : ; “ - ( ) ‘ ¿ ¡ % £ $ ¥2A B C 2 Á Ã Â À Ç3D E F 3 É Ê È4G H I 4 Í Ì5J K L 56M N ñ O 6 Ó Õ Ô Ò7P Q R S 7 ß8T U V 8 Ú Ü Û Ù9W X Y Z 90+ - 0 * / \ [ ] = > < # §
63basicsnavigation keyPress the navigation key up, down, left, or right to scroll to items in the display. When you scroll to highlight the desired item, press r.handsfree speakerYou can use your phone’s handsfree speaker to make calls without holding the phone to your ear.During a call, press the speaker key ) to turn the handsfree speaker On.The handsfree speaker stays on until you press ) again.Note: The handsfree speaker won’t work when your phone is connected to a handsfree car kit or headset.transmittersNote: Consult airline staff about the use of the Transmitters Off feature during flight. Turn off your phone whenever instructed to do so by airline staff.Transmitters Off turns off your phone’s calling features in situations where wireless phone use is prohibited, but you can use the phone’s other non-calling features when Transmitters is turned Off.Find it: M > u > Advanced > Transmitters > Off.#Space*Backcharacters
64basicsuse GPS with map softwareYour phone is enabled with a highly-capable GPS receiver that sends location information to a USB port on a PC, laptop, or PDA.Note: No serial port connectivity is provided by your phone. Applications on the host device which are expecting to receive the GPS location information via a serial port must instead use a Virtual Serial Comm Port.The data sent to the host device is formatted as prescribed in the National Marine Electronics Association 0183 V3.0 (NMEA-0183) standard. As such it supports the following sentences: GGA, GLL, GSA, GSV, RMC, and VTG. This handset is not a full NMEA-0183 compliant device supporting electrical RS-422/RS-232 connectivity as dictated by the NMEA-0183 standard. Consequently it's unsuitable for conventional marine NMEA-0183 equipment use. Its intended use is for normal "terrestrial" mobile users who want to enable their USB hosting computing devices such as a PC, laptop or PDA with the phone's highly-capable GPS functionality.get connected1Open the phone's bottom connector and insert a cable into the phone's bottom connector.2Insert the other end of the cable into a vacant USB receptacle of your host device. A virtual USB Comm Port will be created on your host device upon successful enumeration of the phone as a USB Communications Device Class device. 3Ensure no application in your host device is using the created COMM port. You may
65basicsneed to ensure that the created virtual COMM port settings are set as follows: •Bits per second: 4800 •Data bits: 8 •Parity: None •Stop bits: 1 •Flow control: None 4Start the GPS application on your host device. Set the GPS application to start accepting NMEA-0183 formatted data from the created Virtual COMM port.5Set your phone to start sending NMEA-0183 formatted location information.Find it: M > GPS > Interface > NMEA OUT > On.Your phone is now actively sending location NMEA-0183 formatted GPS data to your USB host device.To stop your phone from sending location data: Find it: M > GPS > Interface > NMEA OUT > Off.Note: Each time you power your phone Off, NMEA OUT is automatically set to Off and you need to manually restart it using the menu selections above.Your USB host device will generally provide charging power (5V, up to 500mA) to your phone via the cable therefore no other charging power to it will normally be required. However some laptops may require that you provide external AC/DC power to the laptop in order for it to provide full 500mA charging current capability to the phone.
66basics
67callscallsTo make and answer calls, see page 16.turn off a call alertYou can press the volume keys to turn off a call alert before answering the call.recent callsThe recent calls list contains information associated with calls you have made and received and call alerts you have received.When you send or receive Private calls, the recent call list contains the following PTV items with those calls:•contact information received•My Info received•short text messages received•pictures sent or received•Datebook events receivedThe recent calls list displays up to 20 of the most recent calls and call alerts.1Press M > Recent Calls.2Scroll through the list.store an item to contacts from recent callsPhone calls, Private calls, My Info, or Contacts entries received from other phones can be stored to the Contacts list from the Recent Calls list.Find it: M > Recent Calls.
68calls1Scroll to or select the item you want to store.2Press M > Save to store the information as a new entry in the Contacts list.or3If Save is not one or you options, press M > Update Contacts. And select the contact you want to update.4Press - under Done to save your changes.redialTo redial your last outgoing call, press and hold O or push the PTT button if it was a private call.caller IDCaller ID allows people to identify a caller before answering the phone by displaying the number of the incoming call. If you do not want your number displayed when you make a call, just follow these easy steps.To block your phone number from being displayed for a specific outgoing call:1Press *67.2Enter the number you want to call.3Press O.To permanently block your number, call your customer service provider.call forwardCall forwarding sends calls to the phone numbers you specify. You can forward all calls to one number or forward missed calls to different numbers depending on the reason you missed the call. You can forward phone lines 1 and 2 independently.Find it: M > Call Forward.
69calls1To forward all calls select All Calls and select To to enter the phone number you want all your calls forwarded to.or2You can specify a forwarding number for each type of missed call by selecting Detailed and chosing the following options:If Busy: When your handset is on a call or transferring data.If No Answer: When you do not answer on the first 4 rings.If Unreachable: When your handset is out of coverage or powered off.voice namesYou can place calls by speaking comands to your phone if you have previously assigned a voice name to your contacts.assign voice names to contacs1Press - under Contcs and select [New Contact].2Assign a name, phone number and select [Options].3Select Voice Name and follow the prompt to record the voice name.4Press - under Back and - under Done.place a call using voice name1Press the speaker key ) until you are prompted to say the voice name.The handset will automatically place the call.emergency callsYour service provider programs one or more emergency phone numbers that you can call under any circumstances, even when your
70callsphone is locked or the SIM card is not inserted.Note: Emergency numbers vary by country. Your phone’s preprogrammed emergency number(s) may not work in all locations, and sometimes an emergency call cannot be placed due to network, environmental, or interference issues.Your phone supports emergency calling. Emergency phone calls can be made even when your SIM card is blocked or not in your phone.Dial 911 or your local emergency number to be connected to an emergency response center. If you are on an active call, you must end it before making an emergency call. When you make an emergency call, your phone’s GPS Enabled feature can help emergency service personnel find you, if you are in a location where your phone's GPS antenna has established a clear view of the open sky and your local emergency response center has the equipment to process location information. Because of the limitations of this feature, always provide your best knowledge of your location to the emergency response center when you make an emergency call.Note: Emergency calls cannot be placed while the keypad is locked.Note: If you have not registered on the network, emergency calls cannot be placed while your SIM card is in your phone.international callsIf your phone service includes international dialing, press and hold 0 to insert your local international access code (indicated by +). Then, press the keypad keys to dial the country code and phone number.
71callsYou can aditionally enable a predefined prefix to the dialing number by using Prepend dialing.Find it: M > Settings > Phone Calls > Prepend.1Select Prepend and set it to On.2Select Number and add the prefix number of your choice.When the Prepend feature is set to On, the predefined prefix is inserted to the front of the number that you are dialing. Except that the number is led by "*", "00", "011" or the number contains "+". Note: You can also use Prepend temporarily when the feature is set to Off. For example, enter the phone number from the home screen and press M > Add Prepend. The temporary prepend will be inserted to the number you are dialing.speed dialEach phone number stored in Contacts is assigned a Speed Dial number, which you can use to call that number.1From the home screen, use the keypad to enter the Speed Dial number assigned to the phone number you want to call.2Press #.3Press O.turbo dialThe first nine entries in your contacts are set for turbo dial. They can be called by pressing and holding the speed dial number (1 through 9).
72callsvoicemailNote: To receive voice mail messages, you must first set up a voice mail account with your service provider.receiving a messageWhen you receive a voice mail message, New VoiceMail Message appears on the display.To call your service provider’s voice mail system and listen to the message:•To check voicemail messages:Press the soft key - under Call.•To dismiss the message notification:Press the smart key ( on the top of the handset.If the caller leaves a message, this icon y appears on the display, reminding you that you have a new message.selective dynamic group (SDG) callsA SDG call is similar to a Private call, but is made to all members of a SDG list at once. A SDG list is a group of Private IDs that you create using your phone. A SDG list must contain at least 2 members and can contain up to 20 members.You can create a SDG list for one call only or store it to Contacts so you can call it any time.Note: In order to store SDG lists to your phone, you must use a SDG-capable SIM card. For more information about SDG-capable SIM cards, contact your service provider. SDG lists created with your phone are not readable by an older iDEN SIM-based phone.
73callsYou can use Send via PTT to send SDG lists to other phones that have this capability.create SDG lists in contactsShortcut: From the home screen press - under Contcs. 1Select [New SDG List].Tip: You can also create a SDG list by selecting [New Contact] and assigning the SDG contact type. See “store a phone number or private ID” on page 18.2If you want to assign a name to the SDG list, enter the name.Note: If you do not assign a name, the SDG list is named “SDG” followed by the number of members in the SDG list. For example, “SDG (8)” for a SDG list with 8 members.3Add Private IDs. See “add private numbers” below.4If you want to create a voice name for the SDG list, select [Options] > Voice Name. As directed by the screen prompts, say and repeat the voice name you want to assign to the SDG list. Speak clearly into the microphone. 5Press - under Save.add private numbersYou can add Private IDs to a SDG list by selecting them from Contacts, the recent calls list, or memo. You can add all members in an existing SDG list by selecting the list. You can select more than one member from Contacts and the recent calls list. A checkmark appears next to each selected item.
74callsTip: To deselect a selected item, highlight it and press r. You can also enter Private IDs from the keypad. add members from contacts, the recent calls list, or memo1While creating a SDG list, select [Add Member] or select [Add Number] and press - under Browse.Tip: To move between Contacts, the recent calls list, and Memo, scroll left or right. 2Scroll to the members you want from Contacts, the recent calls list, or Memo, and press r. A checkmark appears next to each selected member. Tip: To deselect a selected member, highlight it and press r.3Press - under Done.add members manually from the keypad1While creating a SDG list, select [Add Number].2Enter the Private number using the keypad.remove members or SDG listsremove a member from a SDG list1From Contacts, scroll to the SDG list you want to delete the member from.2Press - under Edit.3Scroll to the member you want to remove. 4Press M > Remove Member.5Press - under Save.
75callsremove all members from a SDG list1From Contacts, scroll to the SDG list you want to delete the member from.2Press - under Edit.3Press M > Remove All.4Press - under Yes to confirm.delete a SDG list from Contacts1Scroll to the SDG list you want to delete.2Press M > Delete SDG List.make SDG Calls1From Contacts or the recent calls list, scroll to or select the SDG list you want. orPress and hold ) until a prompt appears telling you to say the voice name. Say the voice name assigned to the SDG list you want. orFrom the home screen, press the number on your keypad for the shortcut you assigned to the SDG list you want.orEnter or select a Private ID and add more Private IDs. See “start a SDG call with a private” below.2Push the PTT button.start a SDG call with a privateYou can start a SDG call with any Private ID you want to call.Note: Choose the first Private ID that you want in the SDG call:1From the home screen, enter the Private ID.or
76callsFrom the Contacts list, scroll to an entry containing the Private ID.orFrom recent calls list, scroll to an entry containing the Private ID.2Press M > Call SDG.3Add more Private IDs. See “add private numbers” on page 73.If you want to save the SDG list you have created press M > Store SDG.orIf you do not want to save the SDG list, press - under Done.4Push the PTT button to make the call. SDG call InformationWhile you are in a SDG call, the following appears on the screen:•The name of the SDG list•The name or the Private ID of the person speaking•The number of participants in the SDG callSDG Call DetailsDuring a SDG call, you can view details about the other SDG list members, such as their name or Private ID, and their status on the call. To view SDG call details, press - under Details.In the SDG Call Details view, these icons appear next to member names or Private IDs:TThe member of the SDG list who is speaking.AA member of the SDG list who is active on the SDG call, but not speaking.
77callsOA member of the SDG list who has exited the call.UA member of the SDG list who could not be reached on the SDG call.uA member of the SDG list whose status is unknown.
78calls
79customizecustomizering tonesTo set the ring tone your phone makes when you receive phone calls, call alerts, message notifications, pictures sent using Send via PTT or Datebook reminders:Note: Only ring tones stored in your phone’s memory are available in the ring tones list. Not all audio files can be assigned as ring tones.Find it: M > Ring Tones1Make sure Vibrate All is set to Off.2Scroll through the list of ring tones and select the one you want to assign. Vibrate sets your phone to vibrate instead of making a sound; Silent sets your phone to neither vibrate nor make a sound.Tip: Highlighting a ring tone lets you hear it.3Select the features you want to assign the ring tone to.4When you are finished, press - under Done.Note: This icon M appears on the display if you set your phone to Silent. This icon Q appears on the display if you set the phone to Vibrate All.set your phone to vibrateYou can set your phone to vibrate instead of making a sound when you receive all phone calls, Private calls, group calls, SDG calls, call
80customizealerts, messages notifications, pictures sent using Send via PTT, and Datebook reminders.Find it: M > Ring Tones > Vibrate All.Set this option to On or Locked.Setting this option to On lets you turn Vibrate All off by pressing the up volume control. Setting this option to Locked requires you to press and hold the up volume control to turn Vibrate All off. The Locked option helps prevent you from accidentally turning Vibrate All off.Tip: To set Vibrate All to On or Locked using the volume controls: Press the volume controls to turn down the volume as far as possible to set Vibrate All to On. Continue to hold the down volume control to set Vibrate All to Locked.To set your phone to vibrate instead of making a sound for some features but not others:Find it: M > Ring Tones.1Make sure Vibrate All is set to Off.2Select Vibrate from the list of ring tones.3Select the features you want to set to make no sound.4When you are finished, press - under Done.wallpaperIf you want more wallpapers, you can download them into your phone for a fee. Check the Downloads menu option on your phone for a catalog of items available for purchase and download. You can also access downloadable wallpapers from the Wallpaper menu.Find it: M > u > Display/Info > Wallpaper.1Select Wallpaper.2Scroll through the list of pictures and press r to select the wallpaper of your choice.
81customizeNote: You can set the wallpapers to change automatically after a certain period of time by turning on the Auto Cycle feature located in the Wallpaper menu.datebookFind it: M > Datebook > M > SetupYou can view or change these options:hide or show location informationYour phone is equipped with a Location feature for use in connection with location-based services that may be available in the future. optionsStart View: Sets Datebook to start in day view, week view, or month view when you access Datebook.Daily Begin: Sets the beginning of your day. This is the earliest time of day displayed in week view, if you have a 12-hour day view.Delete After: Sets the amount of time Datebook waits to delete an event after it occurs.Time Shift: Lets you shift the times of all Datebook events. This is useful if you are traveling to a different time zone.Alert Timeout: Sets the amount of time a tone continues to sound when you receive a Datebook reminder.Clock: Controls whether the time and date appear on the home screen; sets time and date format; sets year.options
82customizeThe Location feature allows the network to detect your position. Turning Location Off will hide your location from everyone except 911.Note: Turning Location On will allow the network to detect your position using GPS technology, making some applications and services easier to use. Turning Location off will disable the GPS location function for all purposes except 911, but will not hide your general location based on the cell site serving your call. No application or service may use your location without your request or permission. GPS-enhanced 911 is not available in all areas.set your privacy optionsFind it: M > GPS > PrivacySelect from the following options:optionRestricted: No Java or similar software applications may view the location of your phone. However, location information may still be available to the phone’s owner, fleet manager, or account administrator.Unrestricted: All applications may view the location of your phone, without notifying you.Ask Access: When an application attempts to view the location of your phone, you will be prompted to give permission. However, location information may still be available to the phone’s owner, fleet manager, or account administrator.
83customize
84other features—advanced callingother featuresadvanced callingfeaturecall waitingTo accept the second call and put the active call on hold press - under Yes.To accept the second call and end the active call press O.Your phone rings with the second call for you to answer.3-way callMake or receive a phone call and press M > 3 Way. Enter the second phone number, press O and - under Join.For quick ways to enter the number, press M to see the dialing menu.You cannot make any other calls after you have joined a 3-way call, even if one party disconnects.any key answerTo answer phone calls by pressing any key on the keypad press M > u > Phone Calls > Any Key Ans > On.feature
85other features—contactscontacts datebookfeatureedit/delete contact entryPress - under Contcs. Select a contact and press M > Edit. Change the desired content and press - under Done.set ringer IDPress - under Contcs. Select a contact and press M > Edit > Ringer.Select desired ringer and press - under Back > - under Done.featurecreate datebook eventsTo create a new Datebook event press M > Datebook > [New Event].see datebook eventTo see a calendar event press M > Datebook. Press left or right to see the day and up or down to see the events.event reminderWhen an event reminder occurs press - under View.Press - under Back to close the reminder.
86other features—GPSGPSTo improve GPS performance:•Stay in the open•Move away from other electrical or electronic devices•Remain stationary•Avoid touching the antenna with your handsreceive datebook events via PTTTo view the information while still in the Private call press r.The 5 most recent events received from a Private ID are stored with the that Private ID on the recent calls list.To store events to the Datebook press - under Save while viewing the event you want to store.featurefeatureview approximate locationTo see your approximate location press M > GPS > Position. Scroll to view the entire screen.To recalculate position press Rfrsh. This may take several minutes.
87other features—handsfreehandsfreeThe use of wireless phones while driving may cause distraction. Discontinue a call if you can't concentrate on driving. Additionally, the use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products.set GPS privacy optionsTo set the level of privacy for your GPS system press M > GPS > Privacy.If your GPS PIN security feature is enabled, enter your GPS PIN and select the privacy option you want.change GPS PINNote: When you receive your phone, your GPS PIN is 0000.To change your GPS PIN press M > u > Security > Change Passwds > GPS PIN. Enter the current GPS PIN and enter the new 4- to 8-digit GPS PIN. Re-enter the new 4- to 8-digit GPS PIN to confirm.featurefeaturespeaker-phoneTo activate the speakerphone while driving press and hold the speakerphone key ).auto answerTo automatically answer calls when connected to a car kit or headset press M > u > Phone Calls > Auto Ans. Select the amount of rings before answering.
88other features—pc applicationspc applicationspersonalizeTTYfeatureother PC applicationsFor a list of complete PC applications visit: www.motorola.com/supportfeaturelanguageTo set the language of your menu press M > u > Display/Info > Language.backlight time lengthTo select how long the display screen and keypad are backlit press M > u > Display/Info > Backlight.menu styleTo display the main menu as graphic icons or a text-based list press M > u > Display/Info > Menu View.clock displayTo display the clock on the home screen press M > u > Display/Info > Clock > Display > On.featureturn On TTY featureFrom the home screen press M > u > Phone Calls > TTY > Use TTY > On.choose TTY modeFrom the home screen press M > u > Phone Calls > TTY > Type.Select from TTY, VCO or HCO.feature
89other features—securitysecurityNote: You can make emergency calls on a locked phone (see page 69). A locked phone still rings or vibrates for incoming calls or messages, but you need to unlock it to answer.change the TTY baud rateFrom the home screen press M > u > Phone Calls > TTY > Baud.Select 45.45 or 50.00.change TTY mode during a callWhile in the TTY call, press M > In Call Setup > TTY > Type.Select from TTY, VCO or HCO.featurephone lockTo lock the phone press M > u > Security > Phone Lock > Lock Now or Auto Lock.featurekeypad lockTo lock the keypad press M > u > Security > Keypad Lock > Lock Now or Auto Lock.Shortcut: To lock the keypad press M > *.enable SIM PINTo enable SIM PIN, press M > u > Security > SIM PIN > On.change SIM PINTo change the SIM PIN, press M > u > Security > Change Passwds > SIM PIN.feature
90other features—security
91Important Safety and Legal Information
92Safety InformationSafety and General InformationSafety InformationThis section contains important information on the safe and efficient operation of your phone. Read this information before using your integrated multi-service portable radio.*Exposure to Radio Frequency (RF) EnergyYour phone contains a transmitter and receiver. When it is ON, it receives and transmits RF energy. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits.Your Motorola phone is designed to comply with local regulatory requirements in your country concerning exposure of human beings to RF energy.Portable Radio Product Operation and EME ExposureYour Motorola radio product is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy (EME):•United States Federal Communications Commission, Code of Federal Regulations; 47 CFR part 2 sub-part J.•American National Standards Institute (ANSI) / Institute of Electrical and Electronics Engineers (IEEE). C95. 1-1992.•Institute of Electrical and Electronics Engineers (IEEE). C95. 1-2005 Edition.*•International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998.•Ministry of Health (Canada). Safety Code 6. Limits of Human Exposure to Radio frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999.•Australian Communications Authority Radio communications (Electromagnetic Radiation - Human Exposure) Standard 2003.•ANATEL, Brazil Regulatory Authority, Resolution 303 (July 2, 2002) "Regulation of the limitation of exposure to * The information provided in this document supersedes the general safety information in user’s guides published prior to May 1, 2006
Safety Information93electrical, magnetic, and electromagnetic fields in the radio frequency range between 9 kHz and 300 GHz." "Attachment to Resolution 303 from July 2, 2002." Operational PrecautionsTo assure optimal radio product performance and to be sure that human exposure to RF does not exceed the guidelines set forth in the relevant standards, always follow these instructions and precautions:Phone OperationWhen placing or receiving a phone call, hold your radio product as you would a wireline telephone. Speak directly into the microphone.Two-way radio operationYour radio product has been designed and tested to comply with national and international standards and guidelines regarding human exposure to RF electromagnetic energy, when operated in the two-way mode (at the face, or at the abdomen when using an audio accessory) at usage factors of up to 50% talk/50% listen.Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the PTT button. To receive calls, release the PTT button. Transmitting 50% of the time or less, is important because this radio generates measurable RF energy only when transmitting (in terms of measuring for standards compliance).When using your radio product as a traditional two-way radio, hold the radio product in a vertical position with the microphone one to two inches (2.5 to 5 cm) away from the lips.If you wear a radio product on your body when transmitting, always place the radio product in a Motorola approved clip, holder, holster, case or body harness. If you do not use a body-worn accessory supplied or approved by Motorola and are not using the radio product in the intended use positions along side the head in the phone mode or in front of the face in the two-way radio mode, or if you hang your device from a lanyard around your neck, keep the device at least 2.5 centimeters (1 inch) from your body when transmitting.Approved AccessoriesFor a list of approved Motorola accessories call 1-800-453-0920, or visit our website at www.hellomoto.com.RF Energy Interference/CompatibilityNearly every electronic device is subject to RF energy interference from external sources if inadequately shielded, designed or otherwise configured for RF energy compatibility. In some circumstances your handset may cause interference with other devices.
94Safety InformationFollow Instructions to Avoid Interference ProblemsTurn OFF your radio product where posted notices instruct you to do so.In an aircraft, turn off your radio product whenever instructed to do so by airline staff. If your radio product offers an airplane mode or similar feature, consult airline staff about using it in flight.Implantable Medical DevicesIf you have an implantable medical devices, such as a pacemaker or defibrillator, consult your physician before using this radio product.Persons with implantable medical devices should observe the following precautions:•ALWAYS keep the phone more than 20 centimeters (8 inches) from the implantable medical device when the phone is turned ON.•DO NOT carry the phone in a breast pocket;•Use the ear opposite the implantable medical device to minimize the potential for interference.•Turn OFF the phone immediately if you have any reason to suspect that the interference is taking place.Read and follow the directions from the manufacturer of your implantable medical device. If you have any questions about using your wireless phone with your implantable medical device, consult your health care provider.Hearing AidsSome phones may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer or physician to discuss alternatives.Other Medical Devices and Health Care FacilitiesIf you use any other personal medical devices, consult your physician or the manufacturer or your device to determine if it is adequately shielded from RF energy. Turn off your radio product when instructed to do so in hospitals or health care facilities that may be using equipment that is sensitive to external RF energy.BluetoothThis device supports Bluetooth 2.0 including EDR and A2DP Stereo profiles. In order for Bluetooth devices to communicate with one another, they must utilize the same Bluetooth profile. To determine the profiles supported by other Motorola devices, visit www.hellomoto.com/bluetooth. For other devices, contact their respective manufacturer.Certain Bluetooth features including those listed may not be supported by all compatible Bluetooth-enabled devices, and/or the functionality of such features may be limited in certain devices, or by certain wireless carriers. Contact your wireless carrier about feature availability and functionality.
Safety Information95Driving PrecautionsCheck the laws and regulations on the use of radio products in the area where you drive. Always obey them.When using your radio product while driving, please:•Give full attention to driving and to the road. Using a phone may be distracting. Discontinue a call if you can’t concentrate on driving.•Use hands free operation, if available.•Pull off the road and park before making or answering a call if driving conditions so require.•Do not place a handset in the airbag deployment area.Responsible driving practices can be found in the “Smart Practices While Driving” section at the end of this guide and/or at the Motorola Web site: www.motorola.com/callsmart.Note: The use of wireless phones while driving may cause distraction. Discontinue a call if you can’t concentrate on driving. Additionally, the use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products.Operational WarningsObey all posted signs when using phones in public areas.Potentially Explosive AtmospheresAreas with potentially explosive atmospheres are often but not always posted, and can include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air contains chemicals or particles, such as grain, dust or metal powders.When you are in such area, turn off your handset, and do not remove, install, or charge batteries unless it is a radio product type especially qualified for use in such areas as “Intrinsically Safe” (for example, Factory Mutual, CSA, or UL approved). In such areas, sparks can occur and cause an explosion or fire.Batteries and ChargersCaution: Improper treatment or use of batteries may present a danger of fire, explosion, leakage, or other hazard. For more information, see the “Battery Use and Battery Safety” section in this user’s guide.Your battery, charger, or portable radio may contain symbols, defined as follows:Symbol DefinitionImportant safety information follows.Do not dispose of your battery or phone in a fire.032374o032376o
96Safety InformationChoking HazardsYour portable radio or its accessories may include detachable parts, which may present a choking hazard to small children. Keep your device and its accessories away from small children.Glass PartsSome parts of your phone may be made of glass. This glass could break if the product is dropped on a hard surface or receives a substantial impact. If glass breaks, do not touch or attempt to remove. Stop using your phone until the glass is replaced by a qualified service center.Seizures/BlackoutsSome people may be susceptible to epileptic seizures or blackouts when exposed to flashing lights, such as when playing video games. These may occur even if a person has never had a previous seizure or blackout.If you have experienced seizures or blackouts, or if you have a family history of such occurrences, please consult with your physician before playing video games or enabling a flashing-lights feature (if available) on your phone.Discontinue use and consult a physician if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, involuntary movements, or disorientation. It is always a good idea to hold the screen away from your eyes, leave the lights on in the room, take a 15-minute break every hour, and stop use if you are very tired.Caution About High Volume UsageListening at full volume to music or voice through a headset may damage your hearing.Your battery or phone may require recycling in accordance with local laws. Contact your local regulatory authorities for more information.Do not throw your battery or phone in the trash.Your phone contains an internal lithium ion battery.Do not let your battery, charger, or phone get wet.Listening at full volume to music or voice through a headset may damage your hearing.Symbol Definition032375o032378oLi Ion BATT
Safety Information97Repetitive MotionWhen you repetitively perform actions such as pressing keys or entering finger-written characters, you may experience occasional discomfort in your hands, arms, shoulders, neck, or other parts of your body. If you continue to have discomfort during or after such use, stop use and see a physician.Open Source Software InformationYou may choose to obtain a copy of any source code being made publicly available by Motorola directly from the Motorola website opensource.motorola.com.Additionally, for instructions on how to obtain a copy of any source code being made publicly available by Motorola related to software used in this Motorola mobile device, please send your request in writing to:MOTOROLA, Inc.OSS Management600 North US Hwy 45Libertyville, IL 60048USA.Motorola has created the www.opensource.motorola.com to serve as a portal for interaction with the software community-at-large.To see additional information regarding licenses, acknowledgments and required copyright notices for open source packages used in this Motorola mobile device, follow these instructions:From the phone Main Menu, select Games and Apps. > OpenSourceNotices.
98Service & RepairsService & RepairsIf you have questions or need assistance, we’re here to help.Go to www.motorola.com/support, where you can select from a number of customer care options. You can also contact the Motorola Customer Support Center at 1 (800) 453-0920 (United States), 1 (877) 483-2840 (TTY, TDD United States for hearing impaired).Export Law AssurancesService & RepairsThis product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce or the Canadian Department of Foreign Affairs and International Trade.
SAR Data99Specific Absorption Rate DataSAR DataALL MODELS WITH FCC ID IHDP56HJ1 MEET THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.1 Tests for SAR are conducted using standard operating positions reviewed by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.Before a phone model is available for sale to the public, it must be tested and certified to the FCC that is does not exceed the limit established by the requirement adopted by the government for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for the i365/i365IS phonetested for use at the ear is 1.09 W/kg and when tested on the body, as described in this user guide, is 1.28 W/kg during packet data transmission. (Measurements for phones worn on the body differ among models, depending upon available accessories and FCC requirements.)2 While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. Please note that improvements to this product model could cause differences in the SAR value for later products; in all cases, products are designed to be within the guidelines.Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association
100SAR Data(CTIA) web-site at http://www.ctia.org or the Canadian Wireless Telecommunications Association (CWTA) Web site: http://www.cwta.ca1. In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.2. The SAR information includes the Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product.
Warranty101Limited Warranty Motorola Communications Products (International)War ran tyWhat Does this Warranty Cover?MOTOROLA warrants the MOTOROLA manufactured iDEN Communication Products listed below (“Product”) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:Rechargeable Batteries will be replaced during the applicable warranty period if:•the battery capacity falls below 80% of rated capacity, or•the battery develops leakage.MOTOROLA, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA.This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between Products Covered Length of CoverageiDEN Suscriber Digital Mobile and Portable UnitsOne (1) year from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below.Product Accesories (manufactured by or under license from MOTOROLA).One (1) year from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below.Batteries. One (1) year from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below.
102WarrantyMOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product.MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment if expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole, or any portion of the system not produced by MOTOROLA, under this warranty.General Provisions:This warranty sets forth the full extent of MOTOROLA’S responsibilities regarding the Product, Repair, replacement or refund of the purchase price, at MOTOROLA’S options, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INLCUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.How to Get Warranty Service:You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by MOTOROLA through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty service.What This Warranty Does Not Cover:•Defects or damage resulting from use of the Product in other than its normal and customary manner.•Defects or damage from misuse, accident, water, or neglect.•Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment.•Breakage or damage to antennas unless caused directly by defects in material workmanship.
Warranty103•A Product subjected to unauthorized Product modifications, disassembles or repairs (including, without limitation, the audition to the Product of non-MOTOROLA supplied equipment).•Product which has had the serial number removed or made illegible.•Rechargeable batteries if:Any of the seals on the battery enclosure of cells are broken or show evidence of tampering.The damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified.•Freight costs to the repair depot.•A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with MOTOROLA’S published specifications or the local type acceptance labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA.•Scratches or other cosmetic damage to Product surfaces that does not effect the operation of the Product.•Normal and customary wear and tear.•Exclusion for defects or damage arising from use of the products in connection with non-MOTOROLA equipment.Patent and Software Provisions:MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a patent, and Motorola will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:•That MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim;•That MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; and•Should the Product or parts become, or in MOTOROLA’S opinion be likely to become, the subject of a claim of infringement of a patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA.MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the
104WarrantyProduct or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or sued in connection with the Product or any parts thereof. In no event shall MOTOROLA be liable for any incidental, special or consequential damages arising from any claim of patent infringement or alleged infringement.Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software, such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise or rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights.
WHO Information105Information From the World Health OrganizationWHO InformationPresent scientific information does not indicate the need for any special precautions for the use of mobile phones. If you are concerned, you may want to limit your own or your children’s RF exposure by limiting the length of calls or by using hands-free devices to keep mobile phones away from your head and body.Source: WHO Fact Sheet 193Further information: http://www.who.int./peh-emfProduct RegistrationRegistrationOnline Product Registration:http://direct.motorola.com/hellomoto/ Motosupport/source/registration.aspProduct registration is an important step toward enjoying your new Motorola product. Registration permits us to contact you for product or software updates and allows you to subscribe to updates on new products or special promotions. Registration is for U.S. residents only and is not required for warranty coverage. The website link above will not register this product for warranty service.Please retain your original dated sales receipt for your records. For warranty service of your Motorola Personal Communications Product you will need to provide a copy of your dated sales receipt to confirm warranty status.Thank you for choosing a Motorola product.
106RecyclingWireless: The New RecyclableRecyclingYour wireless phone can be recycled. Recycling your phone reduces the amount of waste disposed in landfills and allows recycled materials to be incorporated into new products.The Cellular Telecommunications Industry Association (CTIA) and its members encourage consumers to recycle their phones and have taken steps to promote the collection and environmentally sound recycling of end-of-life devices.As a phone user, you have an important role in ensuring that this device is recycled properly. When it comes time to give this phone up or trade it in for a new one, please remember that the phone, the charger, and many of its accessories can be recycled. It's easy. To learn more about CTIA's Recycling Program for Used Wireless Devices, please visit us at: http://recycling.motorola.young-america.com/ index.htmlCalifornia Perchlorate LabelPerchlorate LabelSome mobile phones use an internal, permanent backup battery on the printed circuit board that may contain very small amounts of perchlorate. In such cases, California law requires the following label:“Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.”There is no special handling required by consumer.
Patent and Trademark107Patent and Trademark InformationPatent and TrademarkMOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. © 2008 Motorola, Inc. All rights reserved.Microsoft and Microsoft Internet Explorer are registered trademarks of Microsoft Corporation. T9 is a trademark owned by Tegic Communications. T9® Text Input Patent and Trademark Information. This product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents pending. Java and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. All other product names or services mentioned in this manual are the property of their respective trademark owners. Software Copyright NoticeThe Motorola products described in this manual may include copyrighted Motorola and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the Motorola products may not be modified, reverse-engineered, distributed, or reproduced in any manner to the extent allowed by law. Furthermore, the purchase of the Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product.
108Privacy and Data SecurityPrivacy and Data SecurityPrivacy and Data SecurityMotorola understands that privacy and data security are important to everyone. Because some features of your phone may affect your privacy or data security, please follow these recommendations to enhance protection of your information:• Monitor access: Keep your phone with you and do not leave it where others may have unmonitored access. Lock your device’s keypad where this feature is available.• Keep software up to date: If Motorola or a software/application vendor releases a patch or software fix for your phone which updates the device’s security, install it as soon as possible.• Erase before recycling: Delete personal information or data from your phone prior to disposing of it or turning it in for recycling. For step-by-step instructions on how to delete all personal information from your device, please contact your local service provider.• Understanding AGPS: In order to comply with emergency caller location requirements of the FCC, certain Motorola phones incorporate Assisted Global Positioning System (AGPS) technology. AGPS technology also can be used in non-emergency applications to track and monitor a user’s location, for example, to provide driving directions. Users who prefer not to permit such tracking and monitoring should avoid using such applications.If you have further questions regarding how use of your phone may impact your privacy or data security, please contact Motorola at privacy@motorola.com, or contact your service provider.
Driving Safety109Smart Practices While DrivingDriving Safet yDrive Safe, Call Smart SMCheck the laws and regulations on the use of phones and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas. Go to www.motorola.com/callsmart for more information.Your phone lets you communicate by voice and data, almost anywhere, anytime, wherever wireless service is available and safe conditions allow. When driving a car, driving is your first responsibility. If you choose to use your phone while driving, remember the following tips:• Get to know your Motorola phone and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.• When available, use a hands-free device. If possible, add an additional layer of convenience to your phone with one of the many Motorola Original hands-free accessories available today.• Position your phone within easy reach. Be able to access your phone without removing your eyes from the road. If you receive an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.• Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous.• Do not take notes or look up phone numbers while driving. Jotting down a “to do” list or going through your address book takes attention away from your primary responsibility, driving safely.• Dial sensibly and assess the traffic; if possible, place calls when your car is not moving or before pulling into traffic. If you must make a call while moving, dial only a few numbers, check the road and your mirrors, then continue.• Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that can divert your attention away from the road.• Use your phone to call for help. Dial 911 or other local emergency number in the case of fire, traffic accident, or medical emergencies.**
110Driving Safety• Use your phone to help others in emergencies. If you see an auto accident, crime in progress, or other serious emergency where lives are in danger, call 911 or other local emergency number, as you would want others to do for you.**• Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.** Wherever wireless phone service is available.
111indexindexAaccessories 10, 87active phone line 60advanced calling 843-way calls 84call waiting 84alertset 79turn off 67answer a call 16Bbacklight 88battery charging 14battery indicator 60battery installation 13Bluetoothconnect 50send information 52setting your phone 50turning on or off 50bluetooth 49Ccallanswer 16any key answer 84end 16make 16Call alertsstatus messages 57call forward 68caller ID 68Callsgroup, see Group callscallsSDG, see SDG callscenter key 63center select key 10clock 88contacts 85edit/delete 85set ringer ID 85Ddatebook 85create events 85receive events via PTT 86setup 81view reminders 85dial a phone number 16dialed calls 67display 59
112indexDrafts 22see also text messages, draftsEEmergency Group calls 55ending 56making 56receiving 57emergency number 69end a call 16end key 16export regulations 98Ffrequently asked questionsservice and repairs 98GGPS 86approximate location 86privacy options 87GPS enabledemergency calls 70GPS, see GPS enabledGroup calls 53see also Emergency Group callsmaking 54off 55receiving 55Hhandsfree 87auto answer 87speaker-phone 87handsfree speaker 63home screen 59Hubs 53joining 54setting up 54viewing 54Iinternational calls 70Isolated Operation 57Llanguage 88low battery message 60Mmain menu 60make a call 16menu style 88Message centertext messages 21message indicator 60MMS 36modemusing your handset as a 24
113indexNnavigation key 10, 63Oone touch PTT 33optional accessory 10, 87optional feature 10optional features 10Ppacket data 60PC applications 88personalize 88phone number 20power key 15private callsanswer 17call alerts 17make 16receive a call alert 18PT Manager 35PTV features 26Qquick notescreate, edit 21, 22Rradio frequency 92received calls 67recent calls 67recycling 106redial 68ring style indicator 60ring tonesoff 79setting 79vibrate 79, 80ring tones, setting 79Ssafetyradio frequency 92RF energy interference 93safety information 92safety tips 109SDG callscall details 76lists, adding numbers 73lists, creating 73lists, deleting 74lists, remove members 74lists, save entries 35make call 75starting 75security 89Selective Dynamic Group Calls, see SDG callssend key 16signal strength indicator 59SIM card 11change SIM PIN 89enable SIM PIN 89
114indexsoft keys 59speaker 60speed dial 71Status messagesin call alerts 57store your number 20TTalkgroup Scan 55Talkgroups 53, 54text 20text entry 60alpha method 62word method 61text messages 20, 24creating 22deleting 23, 24drafts 22memory 23message center 21receiving 21resend messages 23sending 22sent messages 23setting up 20TTY calls 88Vvoice mailreceiving 72setting up 72voice names 69voicemail 72voicemail message indicator 72Wwallpaper 80WHO information 105Yyour phone number 20
www.motorola.comNNTN7432ANNTN7432Axxxxxxxx xx xx APR/08Printed in USA

Navigation menu